If you are someone like me who encountered countless problems while installing Viper4Android on your Android 10 or 11 device and have no idea what to do then you are in the right place. Just download and install the apk from the attachment below.
You need to be rooted with magisk but you can still give it a try if you don't have magisk on your device.
Steps -
* Disable MusicFX or any other sound mod you are using either from Setting/App Manager/Apps or by installing Ainur Narsil magisk module
* Reboot
* Now remove Ainur Narsil magisk module from magisk and install Audio Modification Library (This is required in case you have leftovers from last sound mod)
* Reboot
* Now download the app from the attachment
* Install and open the apk. The app will ask you to install drivers. HIT OK
* The phone will automatically reboot and install Viper4Android magisk module
* Open the app and check. It should be working by now.
If it doesn't work -
* Install Audio Compatibility Patch magisk module. By now you will have two magisk module installed. (Audio Modification Library and Audio Compatibility Patch)
* Reboot
* Open the app. It should work now
* Still no? - Turn on legacy mode from app setting
* Still no? - Turn on compatibility mode from app setting
V4A should totally work by now
Edit : On one plus phones you need to change your seLinux mode to permissive first and then install viper4android.
Use seLinux Mode Changer for that.
Edit: All files are attached at the bottom of the post
Edit 2 -
If none of the above solution is working for you.
Download Viper4Andrpid app from here
Download latest Magisk 21.4 from here
- Flash magisk from recovery
- Then open the Viper4Andrpid app and it'll ask you to update the drivers (or won't, depending on if you already have the drivers installed)
- If phone reboots then open the app again and turn on legacy mode from options
- If phone doesn't reboot, go to options and turn on legacy mode
It should be working now
Edit 3-
If the above two methods don't work and you have enforcing SELinux, try this.
• Disable MusicFX
• Install magisk 22.1
• Install Ainur Narsil magisk module
• Reboot
• Go to magisk and remove Ainur Narsil magisk module
• Download Viper4Android 2.7.2.1 from here
• Open it. It will ask you to install drivers. Click Ok and the phone will reboot. Don't panic.
• Open Viper4Android. Turn on Legacy mode. You will see the Viper4Android app icon on your status bar.
• Go to magisk. Install Audio Modification Library magisk module.
• Reboot
• Go to magisk again and install Audio Compatibility Patch magisk and select the options mentioned below -
- Patch Audio Policy : Vol- (no)
- Patch method : Vol+ (new logic)
- Remove notification helper : Vol- (no)
- Patch USB policy for USB dacs? : Vol- (no)
- Use lib workaround: Vol- (no)
• Reboot
• Open your music player and play a song to check if Viper4Android works now
• If you have never used V4A before, just turn on Master Limiter and Speaker Optimization
If that fails too -
• Unistall Viper4Android app
• Remove Audio Compatibility patch
• Reboot
• Install Viper4Android app and open it
• Enable Legacy mode from top right
• Play a song from your Music Player and turn on Master Limiter in the Viper4Android app
• Now turn on speaker optimization
If Viper4Android doesn't process in the Youtube app or Spotify, install the Audio Compatibility patch like I mentioned above and reboot
Fix 6:
If none of the methods above works then it's likely you messed up somewhere in the process. Unistall all the modules and Viper4Android.
Download the SeLinuxMode Changer app and set your SELinux to permissive. (If you want that)
App link :
Release v11.0 · MrBIMC/SELinuxModeChanger
updated to the latest libs and tools implemented app shortcuts to quicktoggle between permissive and enforcing modes new icons and notification styles adaptive icons (including shortcuts) for 8.0+ ...
github.com
Reboot and go to the top of the post. Follow the very first method.
Fix 7: (May 11, 2022)
I have added Aosp Soundfx remover and V4a fx 2.7.2.1 in the attachment.
Flash Aosp Soundfx remover
Reboot
Turn on mobile data/wifi
Flash v4a fx 2721
Reboot
Open Viper4Android app and install the drivers (if the app is asking you to install)
Reboot
Edit : If you encounter distorted/buggy/laggy audio, clean install viper4android again. But this time keep Ainur Narsil and Audio Modification Library magisk module installed
In OnePlus devices or OxygenOS roms you might need to install the driver twice or thrice.
Credit -
Team De Witt and Viper Acoustic
I did not create the app. I just found a way to get it working in some complicated Android 10 - 12 roms
Thanks for reading and have a nice day!
Edit 69:
If the audio isn't loud enough, go to master limiter, drag that output gain slider to right(6db).
If it's still not loud enough, turn on playback game control, tap on it and customize gain and threshold to your liking.
For others,you can test Wavelet from Wit,its awesome app,same dev.
thank you very much it worked perfectly
Monkeysss01 said:
thank you very much it worked perfectly
Click to expand...
Click to collapse
Hit thanks if it helped
@ Ryan Cr 7
I've followed all of your steps but still no driver installation. (CR Droid, Oneplus 8 pro)
ichbinsauch said:
@ Ryan Cr 7
I've followed all of your steps but still no driver installation. (CR Droid, Oneplus 8 pro)
Click to expand...
Click to collapse
In one plus phones you need to change your seLinux mode to permissive first and then install viper4android.
RyanCr7 said:
In one plus phones you need to change your seLinux mode to permissive first and then install viper4android.
Click to expand...
Click to collapse
OK, Thanks .
thank you very much it worked perfectly
I'm SOOOOOO CLOSE to getting it working. Followed your instructions to the letter, and I get everything looking good in the driver status EXCEPT for PROCESSING. It's still a no and that's with tweaking compatibility and legacy. Any final tips?? Thanks.
Can confirm this works on the OnePlus 8 Pro running Android 11, on the xxx no limits magisk module. Thanks so much.
drewman521 said:
I'm SOOOOOO CLOSE to getting it working. Followed your instructions to the letter, and I get everything looking good in the driver status EXCEPT for PROCESSING. It's still a no and that's with tweaking compatibility and legacy. Any final tips?? Thanks.
Click to expand...
Click to collapse
Never mind... I got it....
drewman521 said:
I'm SOOOOOO CLOSE to getting it working. Followed your instructions to the letter, and I get everything looking good in the driver status EXCEPT for PROCESSING. It's still a no and that's with tweaking compatibility and legacy. Any final tips?? Thanks.
Click to expand...
Click to collapse
For some phones you need to change SeLinux to permissive to get V4A to work.
But changing seLinux to permissive is unhealthy for your phone cause it might open backdoor for some apps to take advantage of your root access.
I am updating the app and magisk now. Come back here 30 minutes later and see if the new solution works.
not working on my google pixel 3 xl android 11. installed both Audio patch and still no luck
Evender99 said:
not working on my google pixel 3 xl android 11. installed both Audio patch and still no luck
Click to expand...
Click to collapse
Play a song in your device music player.
Then open Viper4Android app, Go to that CPU lookalike icon on the top right, it will show you the driver status.
Take a screenshot and share it here.
Don't forget to keep the music player running while taking the screenshot.
Not working on OnePlus 7t Pro on Oxygen OS 11 Beta 2, set selinux to permissive, and followed all steps... Any suggestions?
L4WL13T said:
Not working on OnePlus 7t Pro on Oxygen OS 11 Beta 2, set selinux to permissive, and followed all steps... Any suggestions?
Click to expand...
Click to collapse
Have you tried the second apk and magisk?
Is one plus 7t pro and 7 pro similar?
Cause a few days ago I've set up Viper using this method on 7 pro A11 OOS beta.
RyanCr7 said:
Have you tried the second apk and magisk?
Is one plus 7t pro and 7 pro similar?
Cause a few days ago I've set up Viper using this method on 7 pro A11 OOS beta.
Click to expand...
Click to collapse
Just gave it a go, and still no luck
I'm not too sure on the differences between the two devices, though I wouldn't imagine they'd be vast. Once OOS11 comes out of beta I intend on doing a clean install, so perhaps then is the time to give this another shot.
L4WL13T said:
Just gave it a go, and still no luck
I'm not too sure on the differences between the two devices, though I wouldn't imagine they'd be vast. Once OOS11 comes out of beta I intend on doing a clean install, so perhaps then is the time to give this another shot.
Click to expand...
Click to collapse
Sorry it didn't work. Does your rom comes with a pre-installed equalizer/sound system like Dolby?
You guys should just flash the magisk viper 2.7.2 module it usually works and if it doesn't flash the other sound mods and audio sound mod lib. I found that trick back in oreo. However the samsung oneui devices are the hardest because they only come with enforcing kernel unless a dev makes a permissive kernel. I prefer 2.3.4 with the super driver but you have to have a permissive kernel on samsung. You also need to have busybox installed in magisk. With android 11 one ui 3.1 on samsung you need to use legacy mode again unless you have a permissive kernel than just busybox and viper 4.4 module installed with 2.3.4 as a user app that's my favorite. Right now I'm stuck on 2.7.2 because no permissive kernel for oneui 3.1 yet
Perfect, thanks for sharing.
Related
I take no credit for this amazing equalizer. All credits go to @zhuhang and the people from his thread for the convolvers.
If you don't know what V4A is check here for more details.
But basically it's an audiophiles dream that can cause serious hearing loss and such audio enjoyment at the same time!
The Zip has all the files included to enable "neon" support for convolvers, which are also included.
The feedback I've received so far is 100% success.
INSTRUCTIONS:
1) DOWNLOAD THE ZIP
2) FLASH IN RECOVERY (no need to uninstall if you already have viper installed)
3) open the app and you will be prompted to install the drivers. (I always choose the top one, although it does consume more batter, we'll worth it)
The EQ can be either super simple with just the basic adjustments or can get really technical in "expert" mode.
To activate the convolvers hit the 3 dots in the top right and click click the "ui settings" and change it to expert
Current version Download and discussion starts here
UPDATE VERSION 2.4.0.1 Neon Enabled + Convolvers
If using my previous zip version a simple flash of the new zip will update your V4A.
If you are running any version other than the one in my previous zip you will need to follow the steps below to ensure a smooth update to 2.4.0.1.
1) uninstall current driver from Viper by selecting the option is the app or use file manager and delete "libv4a_fx_ics.so" from system/lib/soundfx.
2) wipe data app with application manager or TiBackup
3) uninstall your current V4A
4) Flash to new zip
5) boot up and enjoy
6) hit the thanks button.
old version
Viper4Android neon enabled including convolvers
Thanks to @SammyTRK for confirming it works for this device!
Enjoy!
With permissive enabled kernel, just install v4a as normal app, neon also enable.
Sent from my SM-N920P using XDA-Developers mobile app
A QUICK TUTORIAL ON HOW TO INSTALL VIPER4ANDROID ON STOCK FIRMWARE
Prerequisites
Download the right version of Viper4Android from here http://forum.xda-developers.com/showthread.php?t=2191223 (Can't link direct download due to OP's request)
Download and install ES File Explorer on your device - https://play.google.com/store/apps/details?id=com.estrongs.android.pop&hl=en
Download SELinuxModeChanger - http://forum.xda-developers.com/showthread.php?t=2524485
Root
__________________________________________________________________________________________________
INSTRUCTIONS
First install Busybox from Playstore open the app and press "Install" then install the downloaded SELinux Mode Changer,
Then open the application on your device, it will ask for root, grant it, then after a couple seconds you will be able to change the modes, now select SELinux Mode "PERMISSIVE" and exit the app,
Now open ES file explorer with root explorer enabled from options, now move Viper4Android to Device/system/app Now long press the app and go to options>Properties Now click Change Permissions and give it the following,
User: Read Write only
Group: Read Only
Others: Read only
Now reboot your device and wait about a minute till your Super User manager has given SE Linux Changer root access, now you should see Viper4Android has been installed and is in your app drawer, now open it, if it prompts you to install a driver, do so, if not continue.
Now go to Driver Status in Viper4Android Settings, after you have enabled it in "Enable" in all tabs you should see
NEON: Enabled
ENABLED: YES
STATUS: NORMAL
AUDIO FORMAT: SUPPORTED
PROCESSING: (YES If playing audio at the moment) (NO if not playing audio at the moment)
Sampling Rate: 48000
__________________________________________________________________________________________________
You now have Viper4Android on your device, have fun listening to pristine quality music.
__________________________________________________________________________________________________
Other Information:
DRIVER: 2.4.0.1
Build Number: 18.6.A.0.182 (5.1.1 Lollipop)
Date: 25-09-2016
I don't know if i will update this, installation instructions may change over time, make sure you contact/read Viper4Androids instructions before hand always. Especially if this topic gets dated.
__________________________________________________________________________________________________
FAQ:
Question: Why not use the Playstore version?
Answer: It's not officially maintained by the Viper4Android devs, this is easy and secure and up to date.
Question: Why do i need the SELinux Changer application?
Answer: Our firmware comes with SELinux mode ENFORCING, which does not allow Viper4Android the permissions it needs to install properly and installation without this will result in only the Viper4Android app working and making no changes to the sound quality as the sound driver fails to work. What this app does is change the mode to PERMISSIVE, which gives it the permissions to install properly so the sound driver installs successfully.
Question: Can i uninstall SELinux Changer application after installation?
Answer: No, the sound driver will fail as soon as you remove it, as it goes back to ENFORCING mode.
Question: I followed the instructions but i still did not notice any sound improvements?
Answer: Try rebooting and wait a couple minutes then open SELinux Changer and make sure it has root access and select PERMISSIVE and make sure It's on by closing and opening it and reboot and try again
*Reinstall the sound driver
*Make sure you tick Enable Viper4Android in all the tabs if you don't know which one your audio is played through and just to be sure
*Post in the Viper4android thread
Question: Can i install this as a user app? And is this a system app?
Answer: Yes you can install it as a user app but you might have problems with installation. Yes this is a system app.
__________________________________________________________________________________________________
Last Updated: 01:06 25-09-2016 IST (I may not keep it up-to-date!)
****Make sure you install BusyBox from Playstore****
Mine always says "driver installation failed"
momoring said:
Mine always says "driver installation failed"
Click to expand...
Click to collapse
Did you follow the instructions correctly? I think you did not follow the SELinux changer part.
ARandomIndian said:
Did you follow the instructions correctly? I think you did not follow the SELinux changer part.
Click to expand...
Click to collapse
I followed it all. Btw, i got unlocked bootloader and I used eagleroottool to root my device
Edit: It says "Driver installation failed, the busybox found on your device doesn't work. this usually means you installed the wrong or broken busybox, V4A needs stericson busybox to work. If you are sure about having installed the proper busybox, then please confirm your device has been properly rooted."
momoring said:
I followed it all. Btw, i got unlocked bootloader and I used eagleroottool to root my device
Edit: It says "Driver installation failed, the busybox found on your device doesn't work. this usually means you installed the wrong or broken busybox, V4A needs stericson busybox to work. If you are sure about having installed the proper busybox, then please confirm your device has been properly rooted."
Click to expand...
Click to collapse
Install Busybox from Playstore and open the app and press "Install"
BusyBox is needed for V4A
ARandomIndian said:
Install Busybox from Playstore and open the app and press "Install"
BusyBox is needed for V4A
Click to expand...
Click to collapse
Already did but still not working. I'll try it again later
Edit: Got it to work. I used solid file explorer rather than es file explorer. Thank you
MIUI Camera v2 - from Mi A2 series
Working on Oreo and Pie (TWRP or Magisk), with packages for AOSP and MIUI based ROM.
Test version includes files from BDD Camera booster patch for gcam fix (front and rear module) by BeatByDad (his work is based on RN5patch from nHappyMan).
For full compatibility (with also gcam support) use build.prop_edits addon to change build.prop
Gcam version suggested
Info:
For AOSP
From dumps of Mi A2, the Camera app works on Lineage 15.1 with the help of some libs, so I've made my module to use it on Los. Thanks to others finding I've now found my perfect combination of options and quality so far.
I've solved sound issue and made a fingerprint shutter toggler (TWRP only) that works system wide.
Note: The camera don't needs camera2 api but works with it enabled too.
For MIUI
The MIUI packages are a simpler version because there is no need to install another camera, stock one is already MIUI Camera v2. The mod just enables more functions in the stock app (you can see from the function list what is enabled and what is stock).
there is no need for camera sound fix or fp shutter toggler here since it's al managed by MIUI.
Depending on the MIUI version there are more function like 60fps available.
Link github repo:
AOSP - MIUI
Functions:
in italics options added (not enabled in stock MIUI Camera for whyred)
PHOTO
AI mode
Portrait mode
Full manual mode (1/4s max shutter)
Square mode
Panorama (full quality)
Peak focus (when manual focus)
Grid toggle
Scene modes
Tonal and color presets
HHT
Straighten
Tilt-shift
Group Selfie (works good only when phone is horizontal)
Beautify and Beautify pro (v2)
Timer (3s and 5s)
HDR (on, off, auto), HDR pro (default) and live HDR
Torch mode (back and front)
Increased burst shoot (100 pics)
Better lowlight shot
VIDEO
4K record (30fps)
1080p 60fps
Video image stabilization (software, not with 4K)
Slow motion 720p,120fps - 1080p,120fps (last one, only AOSP)
Time lapse
AUDIO
Camera sound toggle
Increased aac bitrate
ADD-ON
Fingerprint shutter toggler (system wide)
Editor for build.prop with TWRP package
Known Issue:
group selfie partially working (good when taking horizontal shot).
1/2 shutter take faster speed pic at nearly 1/6s
On indian models front filter not working (for now disabled because not supported by miui camera, new version supports it)
audio fix disables system camera sound (so they don't work with camera apps that uses them like snap camera)
TWRP package need to be reinstalled after a dirty flash or ROM updates (it gets uninstalled by doing that so can be done to remove the package)
systemwide fingerprint act as a selector when out of camera app (set your camera icon up left in home screen to have fp quick shortcut to camera too)
other camera patches (for examples some gcam patches) can reduce functionality (test without any other patches if having problems at first).
Install:
Select installer you prefer:
- Magisk if you have it installed and want easy install/uninstall and OTA survival
- TWRP if you want to keep system rootless (need to be reinstalled after a dirty flash or a ROM update).
and select:
- AOSP if on Lineage or any AOSP based ROM
- MIUI if you are on a MIUI based ROM
Install Magisk modules in magisk (from magisk repo too) or TWRP (on your choice) and reboot;
For TWRP installer make a backup of system and vendor in TWRP to uninstall. Also dirty flash ROM will restore system and vendor as before installing the package.
For Magisk AOSP since v0.20 you can choose to install FPShutter_toggle also, to enable system wide fingerprint shutter. It's on a separated module so people can chose if enable it and use it on other ports too.
Note: A second install of FPShutter toggle will revert back files as before disabling the module (uninstall), so next time only need to update Camera module/installer.
If camera don't start check permission, try to clear app data (it will reset permission too).
If still not working wipe cache and dalwik from TWRP.
Download:
LAST STABLE RELEASES - AOSP or MIUI, TWRP or MAGISK
Additional packages:
For fingerprint shutter toggle (AOSP only, MIUI not needed):
Since v0.20 Fingerprint Shutter is a separate TWRP installer, so can work on other ports too.
FPShutter_toggle-TWRP_0.4 <--install from twrp ( once, if reinstalled it will revert the mod.)
tip: I have camera icon in up left corner of home screen so when tapping on fp it get selected another tap opens camera and third tap shoots a pic.
For build.prop edits:
Since the package don't need any build.prop on most system but I like to have some set. I came up with that TWRP package that can survive OTA and dirty flash.
It will backup original system/build.prop to system/build.prop.bak and edit prop saved in system/etc/build.prop_edits.sh.
So to use your config just change content in build.prop_edits.sh relative to props and recompress the package.
build.prop_edits-TWRP_v0.2.zip
TEST releases:
AOSP-TWRP:
TEST:
- MiCamV2_whyred_v1.0.3d.zip
- AOSP-TWRP_MIUICamerav2_v1.0.2_TEST
TO PROPERLY TEST AND AVOID ERRORS: DIRTY FLASH ROM AND WIPE DALVIK AND CACHE
MAKE A TWRP BACKUP TO BE SURE TO BE ABLE TO RESTORE IF SOMETHING GOES WRONG!
WARNING! If the ROM already includes MiCam as stock, updating the app with the test package can give errors.
To avoid any update error before installing the test package manually delete:
Code:
/system/priv-app/MiuiCamera
/data/data/com.android.camera
Then restart system and after install test module from twrp.
Changes:
1.0.3 Unity installer (universal for TWRP-Magisk-MIUI-AOSP) with Stable and Test version plus options to install various patches (RN5CP v1.015 or 1.035; BBDCB v3.1 or back only) and also included fp shutter fix (optional)
1.0.2
- New apk (from jasmine miui 9.6.16 with some patches by me),
- AI mode in front cam and portrait restored for testing (but don't work so can be keept off),
- restored tilt-shift (with some gcam mod can have shutter in preview),
- beautify 3d,
- 1080p 60fps
- 720p 240fps HFR
- new advanced portrait mode with scenes and AI,
- enabled indian filter,
- test support 32s shutter for india model (reported not working),
- front cam, back camera and 1080p fix for gcam by BeatByDad (included BDD camera booster v3.1),
- seems that google photo now enables unlimited free storage for full size pic like pixel (not confirmed)
- more under the hood options enabled.
Bugs:
- wrong preview in manual mode if manual shutter is set to any value.
- Shutter is enabled to go till 32s but max shutter is 1/4s (for global/china models) till we find how to patch lib.
- 240fps in HFR works only 720p (sometimes gives errors)
- front portrait is broken by BBD camera booster front cam fix, not yet found a solution.
MIUI-TWRP: no plans for now
Magisk: will be TWRP only
Magisk repository:
Latest Magisk modules are both in magisk repo choose the one you need based on system in use.
To find them easily search for "whyred"
If MIUI based rom use: MIUIcamera v2 MODs for whyred (Redmi Note 5 / pro) MIUI;
if AOSP based rom use: MIUIcamera v2 PORT for whyred (Redmi Note 5 / pro) AOSP.
Credits:
I saw the works of @carlosggb and @ARNOB XENON and from them I've took the slow-mo fix by @Dyneteve and some video recording improvements inspiration also applied with magisk the sound fix by @lawong.
The audio recording fix by @rocker00 is not anymore supported and on some ROMs it gives problems.
Other people working on improving our camera have inspired and helped this work to be done: @jhenrique09, BeatByDad, nhappyMan and others...
Changelog
V1.0.1 Restored AI scenes, fixes for TWRP packages.
V1.0 Stable version, disabled not working good: AI mode, Group selfie, Tilt-shift (AOSP only), India filters.
v1.0_RC7 AOSP: Removed build.prop edits - MIUI: Fix incorrect module description.
v1.0_RC6 Removed TWRP addon.d support cause errors, added config files from beryllium for 3D beatify.
v1.0_RC5 Fix permission errors, revert build.prop camera aux support for some gcam.
v1.0_RC4 Added more options, fixed [email protected] on MIUI.
v1.0_RC3 Small repo fix. Addon.d fix
v1.0_RC2 Disabled HFR [email protected] for MIUI and removed audio recording fix (issue on some pie ROMs).
v1.0_RC1 Added HFR [email protected] and better video quality record, other minor fixes.
v0.21 Fix for magisk repo.
v0.20 Re-add Camera Sound Fix in camera, only FPShutter as external module. First update from Magisk repo.
v0.19 Add super resolution in MIUI build, removed audio fix and FP shutter from magisk AOSP (made separate modules).
v0.18 Revert to h264, mod watermark in all version, added build.prop edit (for pie support).
v0.17 Added more libs, HEVC codec, removed age&gender, obj. tracking and magic mirror from AOSP cause partially or not working; enabled asd night. Edited watermark.
v0.16 Removed better lowlight shot causing system FC.
v0.15 Revert camera sound toggle fix.
v0.14 Better lowlight shot, magisk module updated.
v0.13 Cleanup, new camera sound fix and first version for Oreo Pie and MIUI
v0.12 Removed tick sound and other small fixes (disabled super resolution, tele and night asd)
v0.11 Fixed FC on some ROM, Added super resolution, tele and night asd, parallel process options. Enabled back camera AI feature. First TWRP version.
v0.10 Granted needed permissions by default.
v0.9 Fixed video start and end record sounds.
v0.8 Added audio recording fix by @rocker00, restored group selfie (for test).
v0.7 Removed all devices but whyred, set default HDR pro (back) and auto (front).
v0.6 Enabled portrait mode (after LineageOS fixed the issues).
v0.5 Added initial support to Mi A1, Mi 6X, Mi A2/lite, Redmi Note 3, Redmi Note 4.
v0.4 Fixed system camera shutter sound (by @lawong), enabled magic mirror and age&gender, full size panorama and effects.
v0.3 Enabled slow motion (by @Dyneteve ), image stabilization and FP shutter. Disabled portrait mode.
v0.2 Disabled AI (gives no visible differences) and zoom options (sometimes use the worst camera).
v0.1 First test porting from Mi A2 camera with more functions.
Older releases:
GITHUB PAGE
AOSP packages:
Magisk module AOSP:
v1.0
v1.0_RC7
v1.0_RC6
v1.0_RC5
v1.0_RC4
v 1.0_RC3
v1.0_RC2
v1.0_RC1
v0.21
v0.20
v0.19
v0.18
v0.17
v0.16
v0.15
v0.14
v0.13
v0.12
v0.11
v0.10
v0.9
v0.8
TWRP installer AOSP:
v1.0
DOWNLOAD TWRP v1.0_RC7 <-- removed restore after updates (not working)
DOWNLOAD TWRP v1.0_RC6 <-- removed restore after updates (not working)
DOWNLOAD TWRP v1.0_RC5 <-- to test restore after updates
DOWNLOAD TWRP v1.0_RC4 <-- to test restore after updates
DOWNLOAD TWRP v1.0_RC3 <-- to test restore after updates
DOWNLOAD TWRP v1.0_RC2 <-- to test restore after updates
DOWNLOAD TWRP v1.0_RC1 <-- to test restore after updates
DOWNLOAD TWRP v0.21 <-- to test restore after updates
DOWNLOAD TWRP v0.20 <-- to test restore after updates
DOWNLOAD TWRP v0.19 <-- to test restore after updates
DOWNLOAD TWRP v0.18 <-- to test restore after updates
DOWNLOAD TWRP v0.17 <-- to test fingerprint shutter
DOWNLOAD TWRP v0.16 <-- to test dirty flash support
DOWNLOAD TWRP v0.15 <-- to test dirty flash support
DOWNLOAD TWRP v0.14 <-- to test dirty flash support
DOWNLOAD TWRP v0.13 <-- to test dirty flash support
DOWNLOAD TWRP v0.12 <--added addon.d (should survive rom updates)
DOWNLOAD TWRP v0.11 (TEST PACKAGE) <--based on this one by @[email protected]
note: TWRP package fixed thanks to feedback and testing by @Saabu and @woland_ca
MIUI packages:
Magisk module MIUI:
V1.0
DOWNLOAD V1.0_RC7
DOWNLOAD V1.0_RC6
DOWNLOAD V1.0_RC5
DOWNLOAD V1.0_RC4
DOWNLOAD V1.0_RC3
DOWNLOAD V1.0_RC2
DOWNLOAD V1.0_RC1
DOWNLOAD V0.21 <--UNINSTALL PREVIOUS VERSION BEFORE INSTALL
DOWNLOAD V0.20
DOWNLOAD V0.19
DOWNLOAD V0.18
DOWNLOAD V0.17
DOWNLOAD V0.16
DOWNLOAD V0.15
DOWNLOAD V0.14
DOWNLOAD V0.13
TWRP Installer MIUI:
v1.0
DOWNLOAD v1.0_RC7
DOWNLOAD v1.0_RC6 <-- removed ROM update support
DOWNLOAD v1.0_RC5 <-- to test if survives OTA
DOWNLOAD v1.0_RC4 <-- to test if survives OTA
DOWNLOAD v1.0_RC3 <-- to test if survives OTA
DOWNLOAD v1.0_RC2 <-- to test if survives OTA
DOWNLOAD v1.0_RC1 <-- to test if survives OTA
DOWNLOAD V0.21 <-- to test if survives OTA
DOWNLOAD V0.20 <-- to test if survives OTA
DOWNLOAD V0.19 <-- to test if survives OTA
DOWNLOAD V0.18 <-- to test if survives OTA
DOWNLOAD V0.17 <-- to test if survives OTA
DOWNLOAD V0.16 <-- to test if survives OTA
DOWNLOAD V0.15 <-- to test if survives OTA
DOWNLOAD V0.14 <-- to test if survives OTA
DOWNLOAD V0.13 <-- to test if survives OTA
Looks promising! Awesome buddy and thanks for share, wished i can give a try but....MIUI user is here.
I'm so interested in this part "Full manual mode (1/4s max shutter)", Please tell me what are the files or the modifications which are responsible for this so i can give a try, i think it's about libs but i am not sure!
Edit: Ohh i thought it's 4s not 1/4s, i already have max 1/2s...any chance for even 8s? redmi note 4 already got 32s https://forum.xda-developers.com/redmi-note-4/how-to/guide-long-exposure-redmi-note-4-redmi-t3657343
rocker00 said:
Looks promising! Awesome buddy and thanks for share, wished i can give a try but....MIUI user is here.
I'm so interested in this part "Full manual mode (1/4s max shutter)", Please tell me what are the files or the modifications which are responsible for this so i can give a try, i think it's about libs but i am not sure!
Click to expand...
Click to collapse
On MIUI you should be able to have same results only by editing /system/etc/device_features/whyred.xml
you can not use the one in this module because I've removed lines not for the camera that MIUI needs, but you can see from it what I've changed and added. For group selfie you need also the libs libmorpho_group_portrait.so and libmorpho_groupshot.so
you can put them in /system/lib64/ they are here
for the manual functions the line in whyred.xml is:
Code:
<!--whether support manual focus/exposure_time in camera CHANGED-->
<bool name="support_camera_manual_function">true</bool>
It's 1/4s max because 1/2 is not true at least on Los. If you compare pic taken with 1/4 and 1/2 you will see 1/2 is darker it's more like 1/6 in reality. For more shutter speed I'll start to try after monday to edit the libs.
Yeah i already have all of this, while you're reply i just edited my post.
About shutter speed, from what i gathered from the link i posted above it looks like it's all about this lib "libmmcamera_whyred_s5k2l7_ofilm_cn_i.so" for the global version
and i think imx for the Indian version, we need someone with proper skills in decompiling .so files so he can brings this mode...lets see!
i go to magisk manager -> moduls -> and press the + select the zip then i get that errror message
- Copying zip to temp directory
! This zip is not a Magisk Module!
or do i have to flash this with twrp ? im really new to magisk
Edit: DOWNLOAD Latest Release used this 0.9 version
_JaSoN_ said:
i go to magisk manager -> moduls -> and press the + select the zip then i get that errror message
- Copying zip to temp directory
! This zip is not a Magisk Module!
or do i have to flash this with twrp ? im really new to magisk
Edit: DOWNLOAD Latest Release used this 0.9 version
Click to expand...
Click to collapse
It was an error, now uploaded right file. :good:
v0.9 DOWNLOAD
Excellent work! Any chance of getting the HDR to work with flash? thanks
hmm not working for me app force close im on magisk v16.0
rom lineage-15.1-20180814-nightly-whyred-signed.zip
hey, can you make it a a normal flashable zip and not a magisk module?
I have latest ressurection remix with camera 2 api and gcam, which works great, but this app crashes at launch (flashed succesfully via latest Magisk). Any idea what is the issue?
On android pie i got a bootloop! ?
Sent from my Redmi Note5 using XDA Labs
carstenheuer said:
On android pie i got a bootloop! ?
Click to expand...
Click to collapse
This is for oreo
Bootloop on masik 2.4
_JaSoN_ said:
hmm not working for me app force close im on magisk v16.0
rom lineage-15.1-20180814-nightly-whyred-signed.zip
Click to expand...
Click to collapse
matthies00 said:
I have latest ressurection remix with camera 2 api and gcam, which works great, but this app crashes at launch (flashed succesfully via latest Magisk). Any idea what is the issue?
Click to expand...
Click to collapse
have you give all permissions?
------------
working fine on RR latest build.
fingerprint is working.
haven't tried group selfies.
only still experiencing delay/lag when switching modes or enter the settings, just like the other 2 ports.
guess it's a rom problem.
Yes, app cant even start anyway...
Working smooth on aex 5.8
60 keeps stoping. always this warning when open
matthies00 said:
Yes, app cant even start anyway...
Click to expand...
Click to collapse
have u tried the other ports? have any problem with those?
of those worked, well, I have no idea then.
mine on RR and gcam active also, and have no problem.
both runs normal.
maybe you could pull some log so the dev might know what's going on.
---------
edit :
something weird happened, don't know if it was a bug.
after I update derp kernel to v2.2, this module suddenly force close. (log attach)
so I revert back to previous version (derp v2.1). still force close.
tried to remove the module and flash it again, still force close.
tried to disable gcam, re-flash the module, still force close.
then I'm flashing derp v2.2 again, flash the other port (from carlos) in magisk manager, reboot, the port runs fine.
then I disable that port, while flashing this module in magisk manager, reboot,
and now this module runs normal, no force close.
delete the other port while enable gcam, reboot, now both working normal again.
I have no idea what was happened, lol.
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
(NOTE YOU CANNOT UPDATE FROM PE 11 WITHOUT SEVERE BUGS BACKUP YOUR DATA WITH NANDROID OR ANOTHER APP AND RESTORE IN 12)
Based on Android 12.0
Disclaimer:- This will void warranty.
You will need to unlock bootloader.
*All your data will be lost*
Read all the steps correctly
BUGS:-
mtp (aka transferring files from phone to pc or vice versa with a cable) will not work with adb (it will freeze phone ) to use mtp disable usb debugging in developer options then once you disable usb debugging click usb settings and choose storage
headphone jack does not work (enable use alternative way to detect headsets in phh settings)
audio volume might be low on some devices install the dsp audio module and
DO NOT let the phone die of battery you will not be able to boot and it will be hard to get back into the system (workaround- in magisk install acca https://github.com/Magisk-Modules-Repo/acc and install this apk after installing https://github.com/MatteCarra/AccA then set profile to default (this will shut down the phone at 5% hence removing the risk of your phone not booting after hitting 0%
You tell me
Links
Rom- Download
Stock Samsung kernel source.
Install-
1.Use twrp 3.5.1 (others did not work for me good luck in testing)
2 Unpack the "xz" archive and put the .img file onto the sd card or internal (if you dont have a sd card do step 3 then transfer the img file to your phone)
3. In TWRP head to factory reset format type yes and hit enter
4. Flash the img file (as system obviously)
5. flash eureka oneui kernel (DONT FLASH THE NON ONEUI ONE ONLY FLASH ONEUI EUREKA KERNEL)
6. flash magisk (it is optional but for best performance you should) (use 21.0 for android 12)
Credits-https://github.com/phhusson/
ponces - Overview
Husband of Rita. Father of Luke. Fan of Android and Linux. There is no place like /home 🤓 - ponces
github.com
Pixel Experience Team, phhusson, AndyYan and eremitein -
Zainullah Boot fix (if you cant boot)
install oneui boot into oneui change date to 3 months from now
check for updates
boot into download mode
flash twrp and vbmeta
boot into twrp
do format data
flash multidisabler
flash rom
flash kernel as boot
do factory reset
reboot
if it boots you into fastboot shutdown flash twrp only and try another factory reset and reboot (In twrp)
(Android 12 )
No gapps needed (after installing update all apps in play store including play store itself)
Camera works but use gcam go mod by greatness https://www.celsoazevedo.com/files/android/google-camera/dev-greatness/f/dl9/
if there is any working gcam mod link it so i can test it
gcam go is way way better than the stock camera with hdr night mode portrait and soon filters
(ultra wide and other cameras do not work for now)
Increase performance without any battery impact or (by feravolt and gloeysik)
Step 1
- Install FDE AI Magisk Module to make it a system app, thus it will work better and removes all kernel locks from OEMs (I'm looking at you, Samsung) https://github.com/feravolt/FDE.AI-docs/releases/download/12.4.1m/FDE.AI-as-system-app.MAGISK.zip
- Update FDE AI to the latest version by downloading the latest APK here, since the fde ai magisk module will only install fde ai 12.4.1, not the latest version: https://github.com/feravolt/FDE.AI-docs/releases
- Move to the bottom of the screen and select AI Chat, then type /advancedai (no space, no uppercase letters). This will going to make the AI more effective, without you having to do anything.
- Go to the settings tab and use the AUTO settings for FDE AI.
Optimized and adjusted Google Play services. Contribute to gloeyisk/universal-gms-doze development by creating an account on GitHub.
github.com
install cloudflaredns4magisk
[MODULE] CloudflareDNS4Magisk
install adaway (optional if you want ads or not) , allow superuser for it download this https://energized.pro/bluGo/formats/filter in adaway click he button in the middle click add click file and add the file then go back to the main menu and click the reload button now https://adaway.org/
Blog
Pixel Experience
Donate
jhenrique09
phhusson
AndyYan
eremitein
ponces
supports A307gt?
yes this is a gsi it works on all a30 and a30s but there might be bugs try on your own risk there is no issues on my a307 -fn
There is a problem in the download link my IDM did not work here!
Please Upload a new link
#Beta_tester
it works try the new link
Is the file name (Pixel experience 11 stable)?
Rafyhasan69 said:
Is the file name (Pixel experience 11 stable)?
Click to expand...
Click to collapse
yes
Rafyhasan69 said:
Is the file name (Pixel experience 11 stable)?
Click to expand...
Click to collapse
tell me how the install goes and if there are any bugs
Zainullahk1234 said:
tell me how the install goes and if there are any bugs
Click to expand...
Click to collapse
PixelExperience_a30-11.0-20210913-0041-UNOFFICIAL.zip Did not flash via TWRP IT Gets Error
Rafyhasan69 said:
PixelExperience_a30-11.0-20210913-0041-UNOFFICIAL.zip Did not flash via TWRP IT Gets Error
Click to expand...
Click to collapse
E3004: This Package is for device: a30,a30dd; this device is a30s.
Updater process ended with error: 1.
how to fix the screen
Rafyhasan69 said:
how to fix the screen
Click to expand...
Click to collapse
yes Go to settings → Phh Treble Settings → Misc features →set Rounded corners to 30
Rafyhasan69 said:
how to fix the screen
Click to expand...
Click to collapse
did it work?
yes it works
hi, does nfc work ?
makadang said:
hi, does nfc work ?
Click to expand...
Click to collapse
yes
Zainullahk1234 said:
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 11.0
Disclaimer:- This will void warranty.
You will need to unlock bootloader.
*All your data will be lost*
Read all the steps correctly
BUGS:- Fingerprint does not work (Can be fixed but is very complex and will not be included in tutorial)
fake corners that cut the screen (fix included in thread)
You tell me
Links
Rom- https://github.com/zainullahk/Pixel-expierence-For-a30-and-a30s-
Stock Samsung kernel source.
Install-
1.Need TWRP 3.4.0 or higher!
2. Unpack the "xz" archive and put the .img firmware file into your storage or sd card
3. Go to TWRP and do wipe data-yes
4. Make Wipe data, cache, cache-Dalvik in advanced wipe
5. Flash our .img file which we threw on the Usb/sdcard/storage
6. If you want flash magisk flash it
7. how to fix the rounded corners issue Go to settings → Phh Treble Settings → Misc features →set Rounded corners to 30
Credits-https://github.com/phhusson/treble_experimentations/releases
(Android 11 )
No gapps needed (after installing update all apps in play store including play store itself)
Camera works but use gcam go mod by greatness https://www.celsoazevedo.com/files/android/google-camera/dev-greatness/f/dl9/
if there is any working gcam mod link it so i can test it
gcam go is way way better with hdr night mode portrait and soon filters
(ultra wide and other cameras do not work)
(if face unlock is not working download the pixel feature drop magisk module and install it this fixed face unlock for me and also added more pixel only features
GitHub - ayush5harma/PixelFeatureDrops: Magisk Module for Pixel Feature Drops that adds the system files for the same and spoof using the latest device fingerprint from Google Pixel .
Magisk Module for Pixel Feature Drops that adds the system files for the same and spoof using the latest device fingerprint from Google Pixel . - GitHub - ayush5harma/PixelFeatureDrops: Magisk Modu...
github.com
(images)
View attachment 5447277View attachment 5447279View attachment 5447281View attachment 5447275
Click to expand...
Click to collapse
new bug fix update
nfc did not work on some devices this is fixed
face unlock fixed
minor performance improvements
Rafyhasan69 said:
yes it works
Click to expand...
Click to collapse
flash this in twrp https://forum.xda-developers.com/t/...flagship-stereo-sound-system-for-a30.4245743/ it will fix sound
Zainullahk1234, good job man. The best firmware for today. Thanks for it.
Works great! Thanks
edit: headphones true jack not working?!
TELEGRAM CHANNEL ADDED: HERE
TELEGRAM CHAT GROUP: HERE
I normally build roms for Oneplus devices, but one of Xperia users donated and asked to build for Xperia XA2 Ultra. XA2 Ultra doesn't have a lot of options, so, here it is:
I have been building Android roms since 2012 for various devices including multiple Sonys, Lenovo Zuk, Oneplus 3, Oneplus 5, 6, 8 and 9. You can check my Oneplus 6 or Oneplus 6T or Oneplus 8 threads and browse my profile.
Jaguar rom is focused on hardening of AndroidOS and kernel. As such, the rom has hardened bionic, art, framework and tightened security.
1 Rom control with custom Power options, Statusbar, Buttons, Navbar, Quicksettings, Lockscreen, Notifications, Gestures, Themes etc...
2. Heavily modified Art, Bionic System/Vold and System/Security
3. Telephony response to Type Zero sms ('silently acknowledged') disabled
4. Toggle to disable Captive Portal logging.
5. Speakerphone proximity sensor toggle - could be set to automatically switch to speaker when not at the ear
6. IMEI and phone numbers hidden in About menu
7. Built-in encrypted DNS providers, such as: Cloudflare (US); LibreDns (Germany); AdguardDns (Cyprus); and PowerDns (Netherlands)
8. Wakelock and Alarmblocker
9. Fully working Call recording with the button visible in Dialer
10. Deskclock app modified to work with PowerOn alarm. The app will boot the phone 2 minutes before scheduled time to trigger the alarm on time
11. Default Dark mode
12. All regular customizations plus. You tell me which feature is missing.
The rom has 2 versions Vanilla (no Gapps) and Full. So, pick according to your needs.
Install instructions
Xperia AX2 Ultra is somewhat easier to deal with (because it doesn't have virtual partitions). So, the only requirement is to be on the latest stock firmware in both slots, and unlocked bootloader, of course. If you have been using Lineageos 18-19, you already have it. If not, install stock and then use Lineage's copy-partitions zip to populate another slot.
1. Either boot official TWRP and flash the rom followed by factory reset, or boot my recovery and sideload the rom also followed by factory reset.:
The command to boot recovery (from fastboot) is simple:
fastboot boot 'recovery name' (without quotes).
The first boot might take longer, because your phone will be encrypted.
2. Magisk: only versions 24.3 and higher will pass Safetynet. However, don't use TWRP, or any other recovery, because you won't boot. Rather install Magisk as a regular app, take boot.img I provide (the same as recovery), put it on your internal storage and patch from the app. Then install the new image (Magisk will tell you where it would save it) via fastboot: fastboot flash boot boot.img.
Download rom V20.2-VANILLA: Here
Download rom V20.2-FULL: Here
Download recovery (same as boot.img): Here
All subsequent releases will be in post #3.
XDAevDB Information
JAGUAR R, ROM for Sony Xperia AX2 Ultra
Contributors
optimumpro
Kernel Source Code (for now Lineage kernel): Here
ROM OS Version: 11.x R
ROM Kernel: Linux 4.x
ROM Firmware Required: no lower than Android 11 + unlocked bootloader
Based On: AOSP/Lineage/DirtyUnicorn/Crdroid
Version Information
Status: Stable
Current Stable Version: See post #3
Stable Release Date: 2021-01-26
Created: 2021-01-29
Updated: 2022-10-18
Credit: AOSP, Lineage, DU, Crdroid, GrapheneOS, CalyxOS
Why not Android 12? Because Google's major new releases don't become stable until at least r50+. Why? Ask Google. My view is: their primary focus is on advertising revenue, hence, everything else is on the back burner.
In addition, I personally dislike Android 12 (12L): you get some minor UI changes in exchange for giving up more privacy..
Screenshots: see Here
Magisk 25 and LSposed are loading now.
October 18. New release V025:
1. October security patches
2. Android r60
3. System webview to 106.x
4. Ability to disable screenshots saving: when disabled, screenshots are taken, but not saved
Native video still doesn't work and probably will never work due to the phone's low ram
Dirty flashing is fine on a previous release
Download rom V25 VANILLA: Here
Download rom V25 FULL: Here
September 13. New release V-24: major update
1. September security patches
2. Android r59
3.Ability to change clock size in statusbar and quicksettings
4. Rom is now compatible with Magisk 25 and Lsposed
5. AOD is fully working
6. DIaler: toggle for post-call snackbar
7. System webview to 105.x
Native gallery still cannot play videos and probably won't ever, as Jaguar takes more ram than Lineage: XA's 4GB of RAM is simply not enough. Use VLC player, which works fine.
Download rom V24-VANILLA: Here
Download rom V24-FULL: Here
August 21. New release V-23
1. August security patches
2. Android r58
3. Video playing may or may not be fixed (no longer have the device)
Dirty flashing is fine on a previous release
Download rom V-23 VANILLA: Here
Download rom V-23 FULL: Here
July 8. New release V-22
1. July security patches
2. Android r57
3. Automatic sleep/suspend mode (scheduled by a user) in Settings/Battery
4. 'Internet permission missing' issue with several apps fixed. Now, all apps including Googleplay, as well as third party apps, have no problems connecting to the internet (no F/C)
5. Many under the hood improvements
Dirty flashing on top of a previous release is fine. Otherwise, clean flash.
Download rom V-22 FULL: Here
Download rom V-22 VANILLA: Here
Does miracast work in this rom, and when mirroring could it black/turn off the screen. This is possible with the stock firmware and i hope that its also possible with the jaguar rom.
July 8. New release V-22
1. July security patches
2. Android r57
3. Automatic sleep/suspend mode (scheduled by a user) in Settings/Battery
4. 'Internet permission missing' issue with several apps fixed. Now, all apps including Googleplay, as well as third party apps, have no problems connecting to the internet (no F/C)
5. Many under the hood improvements
Download in post #3.
Newpipe does not work and possibly other videoplayback applications, doesn 't work in the browser . Only YouTube video plays. And could you integrate audio boost Ainur narsil, Viper or Sound Enhancement Sony Xperia 10 and then magisk is not needed
TheStormRanger said:
Newpipe does not work and possibly other videoplayback applications, doesn 't work in the browser . Only YouTube video plays. And could you integrate audio boost Ainur narsil, Viper or Sound Enhancement Sony Xperia 10 and then magisk is not needed
Click to expand...
Click to collapse
That's because you are using MicroG and you have NOT enabled 'signature spoofing' in Settings/Privacy. Most Google apps will NOT work with MicroG, unless signature spoofing is enabled.
optimumpro said:
That's because you are using MicroG and you have NOT enabled 'signature spoofing' in Settings/Privacy. Most Google apps will NOT work with MicroG, unless signature spoofing is enabled.
Click to expand...
Click to collapse
I am using the full version 22. Everything is already installed there. Changing the settings doesn't help. Newpipe and other software always work without Google services and MicroG. It's sad that not all software works. Your firmware is good, including Bluetooth and security tweaks
TheStormRanger said:
I am using the full version 22. Everything is already installed there. Changing the settings doesn't help. Newpipe and other software always work without Google services and MicroG. It's sad that not all software works. Your firmware is good, including Bluetooth and security tweaks
Click to expand...
Click to collapse
The same for me. Video playback doesn't work. I don't have microg installed. Even the video stored on the phone, or the video recorded with the camera doesn't work. Other than that, everything seems to be working great.
Sorry for my English...
My problem is cannot use Video Playing (From Facebook and other app)
If I play video , it show only black screen . How to fix it
[email protected] said:
Sorry for my English...
My problem is cannot use Video Playing (From Facebook and other app)
If I play video , it show only black screen . How to fix it
TheStormRanger said:
I am using the full version 22. Everything is already installed there. Changing the settings doesn't help. Newpipe and other software always work without Google services and MicroG. It's sad that not all software works. Your firmware is good, including Bluetooth and security tweaks
Click to expand...
Click to collapse
branja6 said:
The same for me. Video playback doesn't work. I don't have microg installed. Even the video stored on the phone, or the video recorded with the camera doesn't work. Other than that, everything seems to be working great.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
One of you would have to post a logcat running when you are trying to play videos.
optimumpro said:
One of you would have to post a logcat running when you are trying to play videos.
Click to expand...
Click to collapse
Ok, I installed a clean V22 full and a Newpipe app. And I attach the logcat. Newpipe works fine on the original firmware and Lineage and others
branja6 said:
The same for me. Video playback doesn't work. I don't have microg installed. Even the video stored on the phone, or the video recorded with the camera doesn't work. Other than that, everything seems to be working great.
Click to expand...
Click to collapse
So far the workaround to an extent is using VLC media player, so this may be some type of codec issue... Hopefully it can be resolved soon
August 21. New release V-23
1. August security patches
2. Android r58
3. Video playing may or may not be fixed (no longer have the device)
Download in post #3.
How long is the first load? I feel like it's been loading for a long time now. At least 10 minutes. Installed in twrp the latest version, was coming from stock 8. Didn't read I needed firmware 11+ until just now. Do I just wait for the phone battery to die and try again? I had planned on installing Magisk after boot, but at this point I'm not sure it is even going to boot.
rjdeleon said:
How long is the first load? I feel like it's been loading for a long time now. At least 10 minutes. Installed in twrp the latest version, was coming from stock 8. Didn't read I needed firmware 11+ until just now. Do I just wait for the phone battery to die and try again? I had planned on installing Magisk after boot, but at this point I'm not sure it is even going to boot.
Click to expand...
Click to collapse
You can always shutdown the phone by pressing 'power key' and 'volume up and down' together for 5-10 seconds.
TWRP doesn't flash well and certainly doesn't work when flashing Magisk (you'll get bootloop).
Don't use V23. Use V22. Get recovery from post #1 and flash it in fastboot like this:
fastboot flash boot_a boot.img
then
fastboot flash boot_b boot.img
Disconnect the phone and start it in recovery by pressing 'power button' and 'volume down' at the same time. Once in recovery, wipe system, then side load V22.
optimumpro said:
You can always shutdown the phone by pressing 'power key' and 'volume up and down' together for 5-10 seconds.
TWRP doesn't flash well and certainly doesn't work when flashing Magisk (you'll get bootloop).
Don't use V23. Use V22. Get recovery from post #1 and flash it in fastboot like this:
fastboot flash boot_a boot.img
then
fastboot flash boot_b boot.img
Disconnect the phone and start it in recovery by pressing 'power button' and 'volume down' at the same time. Once in recovery, wipe system, then side load V22.
Click to expand...
Click to collapse
Thank you, in recovery now about to sideload the V22, then I will reboot into the system and then reboot into recovery and sideload the V23 on top. Should I install Magisk before the V23? Or just go straight into V22 to V23? Again, thank you for responding.
rjdeleon said:
Thank you, in recovery now about to sideload the V22, then I will reboot into the system and then reboot into recovery and sideload the V23 on top. Should I install Magisk before the V23? Or just go straight into V22 to V23? Again, thank you for responding.
Click to expand...
Click to collapse
Don't use v23. I will post v24 tomorrow. I described how to apply Magisk in the OP.
ugh, unfortunately cannot sideload to it for some reason:
adb: sideload connection failed: no devices/emulators found
adb: trying pre-KitKat sideload method...
adb: pre-KitKat sideload connection failed: no devices/emulators found
I am in ADB Sideload though so who knows, maybe I need to switch computers.
rjdeleon said:
ugh, unfortunately cannot sideload to it for some reason:
adb: sideload connection failed: no devices/emulators found
adb: trying pre-KitKat sideload method...
adb: pre-KitKat sideload connection failed: no devices/emulators found
I am in ADB Sideload though so who knows, maybe I need to switch computers.
Click to expand...
Click to collapse
That means there is no connection between your phone and pc. May be adb drivers etc. Try to open the terminal as administrator.