im not an advanced user at all, just like tinkering. i manged to hard brick my phone. blank screen, no lights when you plug it in. i downloaded a blank flash and tried flashing my ROM, unsecessful... tried many different combinations and many many times, a couple of different blank flashes and this is as far as i can manage to get.
blankflash_from_QCO30.85-18]# /home/joel/Desktop/blankflash_fr
om_QCO30.85-18/blank-flash.sh
< waiting for device >
Motorola qboot utility version 3.40
[ 0.000] Opening device: /dev/ttyUSB0
[ 0.000] Detecting device
[ 0.005] ...cpu.id = 186 (0xba)
[ 0.005] ...cpu.sn = 2335135194 (0x8b2f55da)
[ 0.005] Opening singleimage
[ 0.005] Loading package
[ 0.012] ...filename = singleimage.pkg.xml
[ 0.016] Loading programmer
[ 0.016] ...filename = programmer.mbn
[ 0.016] Sending programmer
[ 0.309] Handling things over to programmer
[ 0.310] Identifying CPU version
[ 0.315] Waiting for firehose to get ready
[ 3.330] ...MSM8953 1.0
[ 3.330] Determining target secure state
[ 3.335] ...secure = yes
[ 3.372] Configuring device...
[ 3.377] Flashing GPT...
[ 3.377] Flashing partition with gpt.bin
[ 3.380] Initializing storage
[ 6.382] Target NAK!
[ 6.382] ...num_partition_sectors=61071360
[ 6.382] ...SECTOR_SIZE_IN_BYTES=512
[ 6.382] ...MFR_ID=144
[ 6.382] ...OEM_ID=74
[ 6.382] ...Product name=hB8aP>
[ 6.382] ...{"storage_info": {"total_blocks":61071360, "
block_size":512, "page_size":512, "num_physical":3, "
;mfr_id":144, "serial_num":558412845, "fw_version":"
875573296","mem_type":"eMMC", "prod_name":"
;hB8aP>"}}
[ 6.382] ...XML (0 bytes) not validated
[ 6.382] ERROR: do_package()->do_recipe()->do_flash()->flash_simg()->do_package()
->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage()->firehose_do
_fmt()->do_recipe()->NAK
[ 6.382] Check qboot_log.txt for more details
[ 6.382] Total time: 6.382s
FAILED: qb_flash_singleimage()->do_package()->do_recipe()->do_flash()->flash_simg(
)->do_package()->do_recipe()->do_flash()->gpt_flash()->get_storage()->init_storage
()->firehose_do_fmt()->do_recipe()->NAK
Related
Archos G9: anyone else encountered this probl
Code:
wl1271: ERROR command complete timeout
[ 1154.622924] ------------[ cut here ]------------
[ 1154.623443] WARNING: at drivers/net/wireless/wl12xx/cmd.c:108 wl1271_cmd_send+0x33c/0x374 [wl12xx]()
[ 1154.623687] Modules linked in: wl12xx_sdio wl12xx mac80211 cfg80211 hso [last unloaded: wl12xx_sdio]
[ 1154.625640] Backtrace:
[ 1154.626098] [<c005b1dc>] (dump_backtrace+0x0/0x110) from [<c05918a0>] (dump_stack+0x18/0x1c)
[ 1154.626525] r7:00000009 r6:0000006c r5:bf08851c r4:00000000
[ 1154.627838] [<c0591888>] (dump_stack+0x0/0x1c) from [<c009b5a0>] (warn_slowpath_common+0x54/0x6c)
[ 1154.628112] [<c009b54c>] (warn_slowpath_common+0x0/0x6c) from [<c009b5dc>] (warn_slowpath_null+0x24/0x2c)
[ 1154.628540] r9:00000000 r8:00000000 r7:000000b2 r6:cd657664 r5:ffffff92
[ 1154.632751] r4:cd657260
[ 1154.633850] [<c009b5b8>] (warn_slowpath_null+0x0/0x2c) from [<bf08851c>] (wl1271_cmd_send+0x33c/0x374 [wl12xx])
[ 1154.635620] [<bf0881e0>] (wl1271_cmd_send+0x0/0x374 [wl12xx]) from [<bf089684>] (wl1271_cmd_configure+0x44/0x68 [wl12xx])
[ 1154.636199] [<bf089640>] (wl1271_cmd_configure+0x0/0x68 [wl12xx]) from [<bf08ce84>] (wl1271_acx_sta_mem_cfg+0xc0/0xf0 [wl12xx])
[ 1154.636627] r6:00000020 r5:00000001 r4:d09355a0
[ 1154.640075] [<bf08cdc4>] (wl1271_acx_sta_mem_cfg+0x0/0xf0 [wl12xx]) from [<bf090240>] (wl1271_hw_init+0x260/0x534 [wl12xx])
[ 1154.640838] r7:cd656160 r6:cd657298 r5:00000000 r4:cd657260
[ 1154.642272] [<bf08ffe0>] (wl1271_hw_init+0x0/0x534 [wl12xx]) from [<bf085eb0>] (wl1271_op_add_interface+0xe4/0x25c [wl12xx])
[ 1154.642944] [<bf085dcc>] (wl1271_op_add_interface+0x0/0x25c [wl12xx]) from [<bf04f678>] (ieee80211_do_open+0x32c/0x638 [mac80211])
[ 1154.643615] [<bf04f34c>] (ieee80211_do_open+0x0/0x638 [mac80211]) from [<bf04f9f4>] (ieee80211_open+0x70/0x74 [mac80211])
[ 1154.644165] [<bf04f984>] (ieee80211_open+0x0/0x74 [mac80211]) from [<c0454714>] (__dev_open+0xa0/0xe8)
[ 1154.644897] r5:bf063e78 r4:ceace000
[ 1154.648620] [<c0454674>] (__dev_open+0x0/0xe8) from [<c0451618>] (__dev_change_flags+0xac/0x130)
[ 1154.649963] r7:00000001 r6:00001002 r5:00001003 r4:ceace000
[ 1154.652008] [<c045156c>] (__dev_change_flags+0x0/0x130) from [<c0454640>] (dev_change_flags+0x18/0x4c)
[ 1154.652465] r7:ee947700 r6:00000001 r5:00001002 r4:ceace000
[ 1154.656158] [<c0454628>] (dev_change_flags+0x0/0x4c) from [<c04cdb8c>] (devinet_ioctl+0x3a0/0x7bc)
[ 1154.656433] r7:ee947700 r6:00000001 r5:00008914 r4:00000000
[ 1154.657714] [<c04cd7ec>] (devinet_ioctl+0x0/0x7bc) from [<c04cf300>] (inet_ioctl+0xdc/0x10c)
[ 1154.658172] [<c04cf224>] (inet_ioctl+0x0/0x10c) from [<c0440cac>] (sock_ioctl+0x1fc/0x24c)
[ 1154.658416] r5:becec984 r4:00008914
[ 1154.659271] [<c0440ab0>] (sock_ioctl+0x0/0x24c) from [<c0126500>] (do_vfs_ioctl+0x548/0x5b4)
[ 1154.660003] r7:00000005 r6:00008914 r5:d45c3f00 r4:becec984
[ 1154.663757] [<c0125fb8>] (do_vfs_ioctl+0x0/0x5b4) from [<c01265ac>] (sys_ioctl+0x40/0x64)
[ 1154.664398] r9:cd52a000 r8:c00573a8 r7:00000005 r6:00008914 r5:becec984
[ 1154.665496] r4:d45c3f00
[ 1154.666351] [<c012656c>] (sys_ioctl+0x0/0x64) from [<c0057200>] (ret_fast_syscall+0x0/0x30)
[ 1154.666595] r7:00000036 r6:becec984 r5:00000005 r4:00e63b94
[ 1154.670745] ---[ end trace b791f248093db0fd ]---
[ 1154.671264] wl1271: WARNING CONFIGURE command NOK
[ 1154.672027] wl1271: WARNING wl1271 mem config failed: -110
[ 1156.004577] wl1271: ERROR firmware boot failed despite 3 retries
qtry said:
Archos G9: anyone else encountered this probl
Click to expand...
Click to collapse
No. Simply put mate;-
Post a sensible comment in your title - not just [Q]
Post a description of what the problem is that you are encountering
Post other useful info such as software versions etc
Since the very beginning my OPO randomly rebooted itself from time to time.
It's actually every 1-2 hours now. I've read other threads about it but I couldn't really find any solution to it.
I'm using stock cm11s and recently rooted my phone and the problem is steady.
I hope this last_kmsg can help solving the problem.
Spoiler
[ 88.731228] Backtrace: [ 88.731356] [<c0205f40>] (__rcu_process_callbacks+0x0/0x3e8) from [<c0206378>] (rcu_process_callbacks+0x50/0x13c) [ 88.731481] [<c0206328>] (rcu_process_callbacks+0x0/0x13c) from [<c01a0424>] (__do_softirq+0xd0/0x254) [ 88.731594] r5:ed0ea000 r4:00000009 [ 88.731781] [<c01a0354>] (__do_softirq+0x0/0x254) from [<c01a0904>] (irq_exit+0x98/0xa0) [ 88.731901] [<c01a086c>] (irq_exit+0x0/0xa0) from [<c0106f9c>] (handle_IRQ+0x48/0xa4) [ 88.731965] r4:c1014478 r3:000002a0 [ 88.732199] [<c0106f54>] (handle_IRQ+0x0/0xa4) from [<c0100544>] (gic_handle_irq+0x84/0x12c) [ 88.732263] r6:00000013 r5:00000013 r4:c101e4ac r3:00000003 [ 88.732613] [<c01004c0>] (gic_handle_irq+0x0/0x12c) from [<c0106300>] (__irq_svc+0x40/0x70) [ 88.732726] Exception stack(0xed0eba70 to 0xed0ebab8) [ 88.732792] ba60: c10ea360 00000000 00010001 00010000 [ 88.732910] ba80: ed0ebc78 00000001 ed0ea000 00000805 ee2ff200 00100100 ee2ff200 ed0ebac4 [ 88.733027] baa0: ed0ebac8 ed0ebab8 c010a91c c0aef38c 60000113 ffffffff [ 88.733099] [<c0aef358>] (_raw_spin_unlock_irq+0x0/0x60) from [<c010a91c>] (die+0xd0/0x1e4) [ 88.733218] [<c010a84c>] (die+0x0/0x1e4) from [<c0adefcc>] (__do_kernel_fault.part.15+0x5c/0x7c) [ 88.733332] r8:00100104 r7:ed0ebc78 r6:00000805 r5:ec2fc380 r4:00100104 [ 88.733698] [<c0adef70>] (__do_kernel_fault.part.15+0x0/0x7c) from [<c01130d0>] (do_page_fault+0x358/0x370) [ 88.733814] r7:ec2fc380 r3:ed0ebc78 [ 88.734001] [<c0112d78>] (do_page_fault+0x0/0x370) from [<c0113210>] (do_translation_fault+0x9c/0xa4) [ 88.734072] [<c0113174>] (do_translation_fault+0x0/0xa4) from [<c01002ec>] (do_DataAbort+0x5c/0x18c) [ 88.734187] r7:00100104 r6:c102a038 r5:ed0ebc78 r4:00000805 [ 88.734540] [<c0100290>] (do_DataAbort+0x0/0x18c) from [<c0106298>] (__dabt_svc+0x38/0x60) [ 88.734605] Exception stack(0xed0ebc78 to 0xed0ebcc0) [ 88.734719] bc60: 00100100 00200200 [ 88.734839] bc80: cd72b594 c10e3520 00000002 cd72b580 00000000 00000002 00000000 00100100 [ 88.734906] bca0: 00000004 ed0ebd04 00200200 ed0ebcc0 c0231270 c022fb34 60000093 ffffffff [ 88.735020] r8:00000000 r7:ed0ebcac r6:ffffffff r5:60000093 r4:c022fb34 [ 88.735432] [<c022fab4>] (__rmqueue+0x0/0x4b8) from [<c0231270>] (get_page_from_freelist+0x644/0x650) [ 88.735502] [<c0230c2c>] (get_page_from_freelist+0x0/0x650) from [<c0231f44>] (__alloc_pages_nodemask+0x16c/0x8d4) [ 88.735623] [<c0231dd8>] (__alloc_pages_nodemask+0x0/0x8d4) from [<c0232720>] (__get_free_pages+0x18/0x34) [ 88.735744] [<c0232708>] (__get_free_pages+0x0/0x34) from [<c0114354>] (pgd_alloc+0x1c/0xe4) [ 88.735864] [<c0114338>] (pgd_alloc+0x0/0xe4) from [<c01972e4>] (mm_init.isra.38+0xa4/0xe0) [ 88.735976] r7:00000011 r6:ec2fc380 r5:00000000 r4:e97c3340 [ 88.736281] [<c0197240>] (mm_init.isra.38+0x0/0xe0) from [<c0197a30>] (dup_mm+0x5c/0x418) [ 88.736395] r5:e97c3340 r4:e9386d00 [ 88.736582] [<c01979d4>] (dup_mm+0x0/0x418) from [<c0198b8c>] (copy_process.part.40+0xd50/0xed8) [ 88.736703] [<c0197e3c>] (copy_process.part.40+0x0/0xed8) from [<c0198e60>] (do_fork+0x118/0x358) [ 88.736825] [<c0198d48>] (do_fork+0x0/0x358) from [<c010a324>] (sys_fork+0x30/0x38) [ 88.736896] [<c010a2f4>] (sys_fork+0x0/0x38) from [<c0106700>] (ret_fast_syscall+0x0/0x30) [ 88.737013] Code: e3520000 1affffb3 e3590000 0affffb1 (e5939000) [ 88.737144] ---[ end trace 955e77cfd9aa1471 ]--- [ 88.737210] Kernel panic - not syncing: Fatal exception in interrupt [ 90.299825] SMP: failed to stop secondary CPUs [ 91.300246] wcnss crash shutdown 0 [ 91.300321] Rebooting in 5 seconds.. [ 97.864497] SMP: failed to stop secondary CPUs [ 97.864615] Going down for restart now [ 97.865389] Calling SCM to disable SPMI PMIC arbiter
You need to put it in [ code ] brackets. Its too unorganized for anybody to read as everything is in one line.
Try flashing another kernel. Had 3 random reboots today with AK kernel. Flashed Franco kernel and haven't had any
Sent from my A0001 using Tapatalk
No reboots whatsoever with AK kernel here.
Transmitted via Bacon
can someone help me ?my moto g XT1033(AS)flashed to be a brick.
my PC sys is win8.1 update,link moto g just like this:
Qualcomm HS-USB QDLoader 9008(COM5)
excuse my poor english,i'm a guy must use goagent to link to XDA...:crying:
Checkout this: http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
dedeep said:
Checkout this: http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
Click to expand...
Click to collapse
thank u！but it was not work。。。just like this：
opening device: \\.\COM3
OKAY [ 0.004s]
greeting device for command mode
OKAY [ 0.002s]
identifying device
...serial = 0x2621621
...chip-id = 0x800 (MSM8226)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.006s]
finding files
...programmer = programmer.mbn
...singleimage = singleimage.bin
OKAY [ 0.004s]
validating files
OKAY [ 0.001s]
switching to download mode
OKAY [ 0.001s]
greeting device for image downloading
OKAY [ 0.002s]
sending programmer
OKAY [ 0.010s]
flashing singleimage
ReadFile() failed, error=5
FAILED (blank-flash:sdl-transfer-image:sdl-hello:invalid HDLC frame)
or like this：
opening device: \\.\COM3
OKAY [ 0.005s]
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.004s]
greeting device for command mode
opening device: \\.\COM3
OKAY [ 2.336s]
greeting device for command mode
FAILED (blank-flash:greet-device:error reading packet)
How to ？thank u！
dedeep said:
Checkout this: http://forum.xda-developers.com/moto-g/help/how-to-revive-hard-bricked-moto-g-t2833798
Click to expand...
Click to collapse
NOW，I know that，the only thing i can do now is just wait for MBM-CI，5.0 official。
thank you very much！
Can you boot into recovery mode or all that you get is a blank screen?
Can you post a photo of the cellphone screen?
Cheers!
The phone (XT1031, 16GB, Republic Wireless, 4.4.4) is low use and nothing different was done the day it developed the problem. It worked Monday, on Wednesday it flashed indicator and the screen wouldn't power. It was hard-powered off (held power) and it wouldn't turn on again. The computer does not detect it. I have installed the 64-bit driver for my Windows 7 and am attempting to 'blank-flash' without success. Can anyone assist? Attached is the log. Thanks in advance.
C:\Users\Test\Desktop\blankflash>qboot.exe blank-flash
opening device: \\.\COM3
OKAY [ 0.016s]
greeting device for command mode
OKAY [ -0.000s]
identifying device
...serial = 0x3598E90
...chip-id = 0x801 (MSM8626)
...chip-rev = 0x0
...sv-sbl = 0x0
OKAY [ 0.016s]
finding files
...programmer = programmer_8626.mbn
...singleimage = singleimage_8626.bin
OKAY [ 0.031s]
validating files
OKAY [ -0.000s]
switching to download mode
OKAY [ 0.016s]
greeting device for image downloading
OKAY [ 0.016s]
sending programmer
OKAY [ 0.047s]
flashing singleimage
Target LOG: Open multi failed, unknown error
Target ERROR: 7 - Open multi failed, unknown error
FAILED (sdl-transfer-image:send-image:sdl-open-multi:target error)
Anyone? Can anyone supply a copy of the corrupted file? Ideas? Any help would be appreciated.
Have a look here: http://forum.xda-developers.com/moto-g/development/guide-qhsusb-dload-workaround-t3182477
I was flashing a custom rom that I created but I accidentally switched slots and now my phone fell into the 'Qualcomm qdloader mode'. I'm in need of a blank flash.
https://mirrors.lolinet.com/firmware/moto/racer/blankflash/blankflash_from_QPD30.70-9.zip
getting this error :
**** Log buffer [000001] 2020-12-23_21:46:28 ****
[ 0.000] Opening device: \\.\COM5
[ 0.016] Detecting device
[ 34.321] ERROR: sahara_greet_device()->change_mode()->do_hello()->IO error
[ 34.321] Check qboot_log.txt for more details
[ 34.321] Total time: 34.322s
[ 34.321]
[ 34.321] qboot version 3.86
[ 34.321]
[ 34.321] DEVICE {
[ 34.321] name = "\\.\COM5",
[ 34.321] flags = "0x64",
[ 34.321] addr = "0x62FD54",
[ 34.321] api.bnr = "0x8F2CB0",
[ 34.321] }
[ 34.321]
[ 34.321]
[ 34.321] Backup & Restore {
[ 34.321] num_entries = 0,
[ 34.321] restoring = "false",
[ 34.321] backup_error = "not started",
[ 34.321] restore_error = "not started",
[ 34.321] }
[ 34.321]
**** Log buffer [000001] 2020-12-23_22:00:45 ****
[ -0.000] Opening device: \\.\COM5
[ 0.008] Detecting device
[ 11.732] ReadFile() failed, GetLastError()=0
[ 16.244] ...cpu.id = 286 (0x11e)
[ 16.245] ...cpu.sn = 1353489304 (0x50ac9b98)
[ 16.245] Opening singleimage
[ 16.246] Loading package
[ 16.249] ...filename = pkg.xml
[ 16.251] Loading programmer
[ 16.251] ...filename = programmer.elf
[ 16.251] Sending programmer
[ 16.307] ReadFile() failed, GetLastError()=0
[ 16.622] Unexpected command, expecting 3 or 18 or 4, got 1 instead.
[ 16.632] ERROR: sahara_download()->general error
[ 16.633] Check qboot_log.txt for more details
[ 16.646] Total time: 16.648s
[ 16.646]
[ 16.646] qboot version 3.86
[ 16.646]
[ 16.646] DEVICE {
[ 16.646] name = "\\.\COM5",
[ 16.646] flags = "0x64",
[ 16.646] addr = "0x62FD54",
[ 16.646] sahara.current_mode = "0",
[ 16.646] api.buffer = "0x27FA020",
[ 16.646] cpu.serial = "1353489304",
[ 16.646] cpu.id = "286",
[ 16.646] cpu.sv_sbl = "0",
[ 16.646] cpu.name = "SM_SAIPAN",
[ 16.646] storage.type = "UFS",
[ 16.646] sahara.programmer = "programmer.elf",
[ 16.646] api.bnr = "0x741E58",
[ 16.646] }
[ 16.646]
[ 16.646]
[ 16.646] Backup & Restore {
[ 16.646] num_entries = 0,
[ 16.646] restoring = "false",
[ 16.646] backup_error = "not started",
[ 16.646] restore_error = "not started",
[ 16.646] }
[ 16.646]
Try searching on this site if you find something useful.
xire68 said:
Try searching on this site if you find something useful.
Click to expand...
Click to collapse
someone ran to this same problem, https://forum.xda-developers.com/t/guide-unbrick-moto-g6-plus.3789635/
I think it is the programmer.elf