Hey guys i'm posting this thread to reply to a thread in the dev's section.
Since i'm a new member with under 10 posts i cannot reply to the thread in that section. Here's the thread url:
http://forum.xda-developers.com/showthread.php?t=1237907
Misterjunky wanted to know if the Rogers i997 phones with Gingerbread 2.3.3 were having the same low fps recording issues as others that have complained about it.
I am here to confirm that yes, i bought the phone last week and it does in fact record video only at 15 fps, even at 1080p.
This is very frustrating!
Thank you for letting us know!
I hope we can get ot fixed
Yep, I notice the same problem. After i rooted my phone and install infused 2.1.0 and did a highest resolution recording today, notice that it is it has latency slow fps. Absolutely horrible.
Hi all,
Another Rogers User here with the same low fps issue when recording movies. I also am replying here since I can't post in the developer forum.
Had the infuse for about a month, but just recorded my first video on it yesterday and noticed the clearly low fps.
Stock infuse, no roms.
Good to know that it isn't a regression we introduced.
The media capabilities of the Rogers firmware are clearly crippled - no MHL, low FPS for video.
Same here, Rogers stock 2.3.3 ... getting half frames
Sent from my SAMSUNG-SGH-I997R using XDA App
Thanks!
I Just wanted to stop by here to thank everyone here for reporting
this video recording bug in the stock Rogers Infuse Gingerbread rom.
Now we all know that this bug has nothing to do with the the customization or
improvements of the stock Rogers Gingerbread roms which the DEVS have
been working on but instead this video recording bug was in the stock
Gingerbread rom to start with.
If you guys want to check out all the technical details of your homemade
video recordings, here is a link to MediaInfo which most the devs use:
http://forum.xda-developers.com/attachment.php?attachmentid=705197&d=1314737293
for Misterjunky
Rogers Stock Infuse 4G
sorry im late.
for 480
General
Complete name : C:\Users\archer\Desktop\video-2011-09-11-14-51-51.mp4
Format : MPEG-4
Format profile : 3GPP Media Release 4
Codec ID : 3gp4
File size : 7.11 MiB
Duration : 32s 370ms
Overall bit rate : 1 844 Kbps
Video
ID : 2
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : No
Format settings, ReFrames : 1 frame
Format settings, GOP : M=1, N=30
Muxing mode : Container [email protected]
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 32s 331ms
Bit rate mode : Variable
Bit rate : 1 784 Kbps
Width : 720 pixels
Height : 480 pixels
Display aspect ratio : 3:2
Frame rate mode : Variable
Frame rate : 15.063 fps
Minimum frame rate : 14.493 fps
Maximum frame rate : 15.625 fps
Standard : NTSC
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.343
Stream size : 6.86 MiB (96%)
Language : English
Material_Duration : 32397
Material_StreamSize : 7205362
Material_FrameCount : 487
Audio
ID : 1
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 32s 370ms
Bit rate mode : Variable
Bit rate : 60.2 Kbps
Maximum bit rate : 67.2 Kbps
Channel(s) : 1 channel
Channel positions : Front: C
Sampling rate : 16.0 KHz
Compression mode : Lossy
Stream size : 235 KiB (3%)
Language : English
Material_Duration : 32435
Material_StreamSize : 240924
for 720
General
Complete name : C:\Users\archer\Desktop\video-2011-09-11-14-50-41.mp4
Format : MPEG-4
Format profile : 3GPP Media Release 4
Codec ID : 3gp4
File size : 24.3 MiB
Duration : 33s 151ms
Overall bit rate : 6 137 Kbps
Video
ID : 2
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : No
Format settings, ReFrames : 1 frame
Format settings, GOP : M=1, N=30
Muxing mode : Container [email protected]
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 33s 64ms
Bit rate mode : Variable
Bit rate : 6 088 Kbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate mode : Variable
Frame rate : 15.062 fps
Minimum frame rate : 14.286 fps
Maximum frame rate : 15.873 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.439
Stream size : 23.9 MiB (99%)
Language : English
Material_Duration : 33131
Material_StreamSize : 25168331
Material_FrameCount : 498
Audio
ID : 1
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 33s 151ms
Bit rate mode : Variable
Bit rate : 59.9 Kbps
Maximum bit rate : 66.9 Kbps
Channel(s) : 1 channel
Channel positions : Front: C
Sampling rate : 16.0 KHz
Compression mode : Lossy
Stream size : 241 KiB (1%)
Language : English
Hi all , please see below link for 30fps fix. http://forum.xda-developers.com/showthread.php?t=1271876
Confirmed working on my Rogers infuse 4g stock 2.3.3 rom. Note the lib files are 2 months newer than other lib files -- to me this indicates it's off a new version, possibly 2.3.4 . No worries to. If ud like to be on safe side like me, before u copy as per instructions, rename the original files with underscore at the end -- this was u keep originals as ...
Sent from my SAMSUNG-SGH-I997R using XDA App
This fixed the fps issue on my stock rogers infuse as well. It seems to be working. I made backups of the files (only 3 of them, whereas there were 4 new files).
Thanks to all the folks who contributed to the fix
Sent from my SAMSUNG-SGH-I997R using XDA App
Awsome!
Now to find where someone can post a Stock Rogers dump i can use to restore my own phone...
....Never mind, Found one!
(Had to mash 2 return to stock programs together, but it works! http://forum.xda-developers.com/showthread.php?t=1315362)
Why the hell did you bump this?
duhhhh
Naphthoylindole said:
Why the hell did you bump this?
Click to expand...
Click to collapse
Probably cause i JUST GOT THE PHONE!
Good for you, now go do some other things that lead to a month ban.
Naphthoylindole said:
Good for you, now go do some other things that lead to a month ban.
Click to expand...
Click to collapse
Bumping a 3 week old thread can get u banned??
Sent from my SAMSUNG-SGH-I997 using XDA App
I couldn't get the method to work, whenever I try to copy the 4 files into that directory (via Root Explorer) I get a error window saying it cant be done because that directory is system read only. Any thoughts?
My Infuse is from Rogers, and yes I have root from this method: http://forum.xda-developers.com/showthread.php?t=1197248
Edit: OK the problem is fixed. While in the folder with the original files I pressed the "mount R/W" button at the top of Root Explorer and tried to paste the four modded files but got that "read only" error. For some reason doing it to the system folder first, then going to the lib folder and doing it there made it work. The video recording is simply epic!
hi friends, i have a pobleme i flashed a room from chineese forum , but now the wifi & the bluetooth dont work can somebudy upload his stock rom for me ? help wanted pleaze
everss said:
hi friends, i have a pobleme i flashed a room from chineese forum , but now the wifi & the bluetooth dont work can somebudy upload his stock rom for me ? help wanted pleaze
Click to expand...
Click to collapse
How cos i cant get flash tool to see the phone? I'm on jb (3.4 kernel) however and can't get the phone to root....
everss said:
now the wifi & the bluetooth dont work
Click to expand...
Click to collapse
You don't need the whole ROM, just replace the file mtk_stp_wmt.ko at /system/lib/modules, reboot & it'll work after that...
Turbojo said:
can't get the phone to root....
Click to expand...
Click to collapse
Bro, this is one of the easiest device to root but wait JB 3.4 kernel... i want your Factory ROM...
Use my tut to gain root & backup your Factory ROM then upload to d-h.st... :laugh:
Cheers...
i have finally found a rom on russian forum and wifi work thanks my friends if anyone want my rom send me a message i can upload it
yuweng said:
Bro, this is one of the easiest device to root but wait JB 3.4 kernel... i want your Factory ROM...
Use my tut to gain root & backup your Factory ROM then upload to d-h.st... :laugh:
Cheers...
Click to expand...
Click to collapse
Doesn't work with 3.4 kernel, have to cook recovery and root through recovery...
Attached cooked recovery for N9776 JB 4.1.1 3.4 kernel.
gracias!!!
Sorry but, is this rom diferent from the one than yuweng post??
Tnxs!!
can you upload it?
everss said:
i have finally found a rom on russian forum and wifi work thanks my friends if anyone want my rom send me a message i can upload it
Click to expand...
Click to collapse
Hello!! Can you upload the rusian rom pls? n_n
Turbojo said:
Doesn't work with 3.4 kernel, have to cook recovery and root through recovery...
Attached cooked recovery for N9776 JB 4.1.1 3.4 kernel.
4.1.1 3.4 rom rom.zip - 305.48 MB
Click to expand...
Click to collapse
Turbojo when I go to flash the recovery and use the scatter file in the rom.zip you provided it says it has a bad preloader file when I try to use SP Flash tool. I am using ver 3.1224.01. Am I doing something wrong?
Turbojo's upload is e1911_v77_gq2000_a41_6628_v20_20121226 & its corrupted so everyone stop downloading & save your bandwidth...
i know its frustrating to download something so huge in size & then you found out that it doesn't work & he doesn't wanna take it down...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That link to Russian site is here but i must WARN you that SP Flash Tool is a very dangerous tool & many has take it for granted & try out whatever function in it & they flash whatever ROMs they find & at last they brick it...
For N9776, there are two main hardware revision & many OS revision...
1) e1911_v77_gq2000_ov5647 -> Uses MT6620 chipset
2) e1911_v77_gq2000_9p017_6628 -> Uses MT6628 chipset & they change the name to e1911_v77_gq2000_a41_6628_v20 ( Updated to 4.1.1 )
For e1911_v77_gq2000_ov5647, below are the sub OS revision
1) Last version 20121023_e1911_v77_gq2000_ov5647 -> Don't be fool by its Android Version = 4.1.1, it is still using API Level 15...
2) 20121016_e1911_v77_gq2000_ov5647
3) 20120928_e1911_v77_gq2000_ov5647
4) 20120925_e1911_v77_gq2000_ov5647
5) 20120919_e1911_v77_gq2000_ov5647 -> Updated to 4.0.9
6) 20120908_e1911_v77_gq1008_ov5647
7) 20120904_e1911_v77_gq1008_ov5647
8) 20120829_e1911_v77_gq1008_ov5647
9) 20120820_e1911_v77_gq1008_ov5647
10) 20120801_e1911_v77_gq1008_ov5647
For 9p017_6628/ gq2000_a41_6628_v20, you can try the latest version here, credits to Aivars...
WARNING
Before doing anything further, pls pls use this tool here to backup your existing Factory ROM out of it first, better to be safe than sorry... Credits to Russian Master Shifu rua1...
Happy Upgrading & Cheers...
---------------------------------------------------
Notice
Just did some thread following up on china.iphone.ru...
it turns out that there are emergence of cheaper version of N9776 & i thought to myself how the price dropped so fast & it turns out that it is indeed the cheaper version MT6575...
MT6575 is Pin-to-pin compatible with MT6577 so some clever manufacturer instead of upgrading, they are downgrading N9776... :laugh:
So pls make sure & don't just flash blindly, all these here are for MT6577...
Jelly Bean Update for Star N9776 with obsolete MT6620 chipset
Post getting too big, refer to main thread here...
I'm getting this phone soon, ordered it, Star N9776 mtk6577 1.2 ghz chip. Is this the same phone you guys are talking about here? If not, will this rom work on it too?
Sent from my N860 using Tapatalk 2
All ROMs here are for support of obsolete hardware & yours is suppose to be the latest version, my friend & you wouldn't want it...
However, pls do update here when you have receive yours & if its the latest JB with 4.1.2 then i want your boot.img...
Hello,
I got this start N9776 yesterday, bought at dx.com.
The phone is great for just 170$, but there is a problem I can't solve: can't enable wifi & BT. I read some posts here and I found the solution: root the device and delete 1 file in /System.
But I can't root. Any rooting process has 2 steps. I can't apply the 2nd because it doesn't restart itself, I have to remove battery always.
Factory ROM is N9776-e1911_v77_gq2000_a41_6628_v20_20130128 kernel 3.4.0.
I have tried MTK Root, Root_with_Restore_by_Bin4ry_v17, Root_with_Restore_by_Bin4ry_v18. No luck.
Please any help?? I bought 3 of them and all have the same problem.
Thanks!!
9776 root
Hello!
I recently bought this phone.
A few questions for:
-How to Root
-to increase the ROM somehow?
-What programs are required to? (Here, for example I like Samsung Odin)
other:
I put up a hardware investment info and there I see that 5MP instead of 12Mp on the camera unit. How can that be?
Sorry for my bad english
Thanks for the answers
Norbert
Alps E1911_v77_gq2000_a41_6628_v20
System (Android 4.1.1)
Model E1911_v77_gq2000_a41_6628_v20
Manufacturer Alps
Device E1911_v77_gq2000_a41_6628_v20
Product E1911_v77_gq2000_a41_6628_v20
Brand Alps
Android Version 4.1.1 (Jelly Bean)
API Level 16
Fingerprint unknown
Display (854x480)
Size 854x480
Refresh Rate 48,36 Hz
Default Orientation Portrait
Physical Size 4,08" (10,37 cm)
Density 240 dpi (High)
Pixels Per Inch X: 240; Y: 240
Processor (ARMv7)
Processor ARMv7 Processor rev 0 (v7l)
Cores 2
Max Frequency 1001 Mhz
Instruction Sets armeabi-v7a, armeabi
NEON Supported Yes
Memory (473 MB)
System RAM 473 MB
JVM Max Memory 64 MB
Internal Storage 338 MB
External Storage 4589 MB (Removable)
Back Camera (12 megapixel)
vinga said:
Please any help?? I bought 3 of them and all have the same problem.
Click to expand...
Click to collapse
Refer to here ( Reply attn to djao99)...
nofear74 said:
-How to Root, -to increase the ROM somehow?, -What programs are required to?
other: I put up a hardware investment info and there I see that 5MP instead of 12Mp on the camera unit. How can that be?
Click to expand...
Click to collapse
Root, refer to above, increase ROM, you mean data partition, SPFT sn85
AFAIK, for MT6577 max is 8Mpx, only latest MT6589 supports true 12Mpx...:laugh:
Created with Hardware Info 2.1.0
Alps E1911_v77_gq2000_a41_6628_v20
System (Android 4.1.1)
Model E1911_v77_gq2000_a41_6628_v20
Manufacturer Alps
Device E1911_v77_gq2000_a41_6628_v20
Product E1911_v77_gq2000_a41_6628_v20
Brand Alps
Android Version 4.1.1 (Jelly Bean)
API Level 16
Fingerprint unknown
Display (854x480)
Size 854x480
Refresh Rate 48,36 Hz
Default Orientation Portrait
Physical Size 4,08" (10,37 cm)
Density 240 dpi (High)
Pixels Per Inch X: 240; Y: 240
Processor (ARMv7)
Processor ARMv7 Processor rev 0 (v7l)
Cores 2
Max Frequency 1001 Mhz
Instruction Sets armeabi-v7a, armeabi
NEON Supported Yes
Memory (473 MB) <------------------- I would like to raise some
System RAM 473 MB
JVM Max Memory 64 MB
Internal Storage 338 MB
External Storage 4589 MB (Removable)
Back Camera (12 megapixel)
Ae Mode 1
Ae Mode Values 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22
Af Draw 0
Af X 0
Af Y 0
Afeng Mode 0
Afeng Pos 0
Aflamp Mode Off
Aflamp Mode Values Off, On, Auto
Antibanding Auto
Antibanding Values 60hz, 50hz, Auto, Off
Auto Exposure Lock Supported True
Auto Whitebalance Lock Supported True
Awb 2pass On
Awb 2pass Values Off, On
Brightness Middle
Brightness Values Low, Middle, High
Burst Num 1
Cam Mode 0
Cap Mode Normal
Cap Mode Values Normal, Continuousshot, Smileshot, Bestshot, Evbracketshot, Mav, Hdr, Autorama, Asd, Pano_3d, Single_3d, Face_beauty
Capfname /sdcard/DCIM/cap00
Contrast Middle
Contrast Values Low, Middle, High
Edge Middle
Edge Values Low, Middle, High
Effect None
Effect Values None, Mono, Sepia, Negative, Aqua, Blackboard, Whiteboard
Exposure 0
Exposure Compensation 0
Exposure Compensation Step 1.0
Exposure Meter Center
Exposure Meter Values Center, Spot, Average
Exposure Values 0, 1, 2, 3, 1, 2, 3
Fast Continuous Shot Off
Fast Continuous Shot Values Off, On
Flash Mode Off
Flash Mode Values Auto, On, Off, Torch
Focal Length 3.5
Focus Distances 0.95, 1.9, Infinity
Focus Meter Spot
Focus Meter Values Spot, Multi
Focus Mode Auto
Focus Mode Values Auto, Continuous Picture, Continuous Video, Macro, Infinity, Manual, Fullscan
Horizontal View Angle 360
Hue Middle
Hue Values Low, Middle, High
Iso Speed Auto
Iso Speed Eng 0
Iso Speed Values Auto, 100, 200, 400, 800, 1600
Isp Mode 0
Jpeg Quality 85
Jpeg Thumbnail Height 120
Jpeg Thumbnail Quality 85
Jpeg Thumbnail Size Values 0x0, 160x120, 320x240
Jpeg Thumbnail Width 160
Max Exposure Compensation 3
Max Num Detected Faces Hw 15
Max Num Detected Faces Sw 0
Max Num Focus Areas 1
Max Num Metering Areas 1
Max Zoom 10
Min Exposure Compensation 3
Orientation 90
Pano Dir Right
Pano Idx 0
Picture Format Jpeg
Picture Format Values Jpeg
Picture Size 3264x2448
Picture Size Values 640x480, 1280x960, 1600x1200, 2048x1536, 2560x1920, 3264x2448, 4000x3000
Preview Format Yuv420sp
Preview Format Values Yuv420sp, Yuv420p, Yuv420i Yyuvyy 3plane
Preview Fps Range 5000, 30000
Preview Fps Range Values (5000, 30000)
Preview Frame Rate 30
Preview Frame Rate Values 15, 24, 30
Preview Size 640x480
Preview Size Values 176x144, 320x240, 352x288, 480x320, 480x368, 640x480, 720x480, 800x480, 864x480, 1280x720, 1920x1088
Prv Int Fmt Yuv420i Yyuvyy 3plane
Rawfname /sdcard/DCIM/raw00.raw
Rawsave Mode 0
Rotation 0
Saturation Middle
Saturation Values Low, Middle, High
Scene Mode Auto
Scene Mode Values Auto, Portrait, Landscape, Night, Night Portrait, Theatre, Beach, Snow, Sunset, Steadyphoto, Fireworks, Sports, Party, Candlelight
Smooth Zoom Supported False
Stereo3d Image Format Jps
Stereo3d Image Format Values Jps, Mpo
Stereo3d Mode Off
Stereo3d Mode Values Off, On
Stereo3d Picture Size 2560x720
Stereo3d Picture Size Values 2560x720
Stereo3d Preview Size 640x360
Stereo3d Preview Size Values 640x360, 854x480, 960x540, 1280x720
Stereo3d Type Off
Stereo3d Type Values Off
Tv Delay 240
Vertical View Angle 360
Video Stabilization False
Video Stabilization Supported True
Video Stabilization Values False, True
Whitebalance Auto
Whitebalance Values Auto, Daylight, Cloudy Daylight, Shade, Twilight, Fluorescent, Warm Fluorescent, Incandescent
Zoom 0
Zoom Ratios 100, 114, 132, 151, 174, 200, 229, 263, 303, 348, 400
Zoom Supported True
Zsd Mode Off
Zsd Mode Values Off, On
Zsd Supported True
Front Camera (1,2 megapixel)
Ae Mode 1
Ae Mode Values 1
Af Draw 0
Af X 0
Af Y 0
Afeng Mode 0
Afeng Pos 0
Aflamp Mode Off
Aflamp Mode Values Off
Antibanding 50hz
Antibanding Values 60hz, 50hz
Auto Exposure Lock Supported True
Auto Whitebalance Lock Supported True
Awb 2pass On
Awb 2pass Values Off, On
Burst Num 1
Cam Mode 0
Cap Mode Normal
Cap Mode Values Normal
Capfname /sdcard/DCIM/cap00
Effect None
Effect Values None, Mono, Sepia, Negative, Sepiagreen, Sepiablue
Exposure 0
Exposure Compensation 0
Exposure Compensation Step 1.0
Exposure Values 0, 0.3, 0.7, 1, 1.3, 0.3, 0.7, 1, 1.3
Fast Continuous Shot Off
Fast Continuous Shot Values Off, On
Focal Length 3.5
Focus Distances 0.95, 1.9, Infinity
Focus Mode Infinity
Focus Mode Values Infinity
Horizontal View Angle 360
Iso Speed Auto
Iso Speed Eng 0
Iso Speed Values Auto
Isp Mode 0
Jpeg Quality 85
Jpeg Thumbnail Height 120
Jpeg Thumbnail Quality 85
Jpeg Thumbnail Size Values 0x0, 160x120, 320x240
Jpeg Thumbnail Width 160
Max Exposure Compensation 1
Max Num Detected Faces Hw 15
Max Num Detected Faces Sw 0
Max Num Focus Areas 0
Max Num Metering Areas 0
Max Zoom 10
Min Exposure Compensation 1
Orientation 270
Pano Dir Right
Pano Idx 0
Picture Format Jpeg
Picture Format Values Jpeg
Picture Size 1280x960
Picture Size Values 320x240, 640x480, 1280x960
Preview Format Yuv420sp
Preview Format Values Yuv420sp, Yuv420p, Yuv420i Yyuvyy 3plane
Preview Fps Range 5000, 30000
Preview Fps Range Values (5000, 30000)
Preview Frame Rate 20
Preview Frame Rate Values 10, 20
Preview Size 320x240
Preview Size Values 176x144, 320x240, 352x288, 480x320, 640x480
Prv Int Fmt Yuv420i Yyuvyy 3plane
Rawfname /sdcard/DCIM/raw00.raw
Rawsave Mode 0
Rotation 0
Scene Mode Auto
Scene Mode Values Auto, Night
Smooth Zoom Supported False
Stereo3d Type Off
Stereo3d Type Values Off
Tv Delay 240
Vertical View Angle 360
Video Stabilization False
Video Stabilization Supported False
Video Stabilization Values False
Whitebalance Auto
Whitebalance Values Auto, Daylight, Cloudy Daylight, Fluorescent, Incandescent, Tungsten
Zoom 0
Zoom Ratios 100, 114, 132, 151, 174, 200, 229, 263, 303, 348, 400
Zoom Supported True
Zsd Mode Off
Zsd Mode Values Off, On
Zsd Supported True
Sensors (3)
bma222 3-axis Accelerometer
Vendor The Android Open Source Project
Range 32.0
Resolution 0.00390625
Power 0.13 mA
tmd2771 Proximity Sensor
Vendor Capella
Range 1.0
Resolution 1.0
Power 0.13 mA
tmd2771 Light Sensor
Vendor Capella
Range 10240.0
Resolution 1.0
Power 0.13 mA
OpenGL 1.X (PowerVR SGX 531)
General
Renderer PowerVR SGX 531
Version OpenGL ES-CM 1.1
Vendor Imagination Technologies
Limits
Texture Size 2048x2048
Texture Units 4
Viewport Size 2048x2048
Modelview Stack Depth 16
Projection Stack Depth 2
Texture Stack Depth 4
Lights 8
Compressed Texture Formats
ETC1, Paletted
Extensions
GL_EXT_debug_marker GL_OES_byte_coordinates GL_OES_fixed_point GL_OES_single_precision GL_OES_matrix_get GL_OES_read_format GL_OES_compressed_paletted_texture GL_OES_point_sprite GL_OES_point_size_array GL_OES_matrix_palette GL_OES_draw_texture GL_OES_query_matrix GL_OES_texture_env_crossbar GL_OES_texture_mirrored_repeat GL_OES_texture_cube_map GL_OES_blend_subtract GL_OES_blend_func_separate GL_OES_blend_equation_separate GL_OES_stencil_wrap GL_OES_extended_matrix_palette GL_OES_framebuffer_object GL_OES_rgb8_rgba8 GL_OES_depth24 GL_OES_stencil8 GL_OES_compressed_ETC1_RGB8_texture GL_OES_mapbuffer GL_OES_EGL_image GL_OES_EGL_image_external GL_EXT_multi_draw_arrays GL_OES_required_internalformat GL_IMG_read_format GL_IMG_texture_compression_pvrtc GL_IMG_texture_format_BGRA8888 GL_EXT_texture_format_BGRA8888 GL_OES_egl_sync GL_IMG_vertex_array_object
OpenGL 2.0 (PowerVR SGX 531)
General
Renderer PowerVR SGX 531
Version OpenGL ES 2.0 build [email protected]
Vendor Imagination Technologies
GLSL Version OpenGL ES GLSL ES 1.00 build [email protected]
Limits
Texture Size 2048x2048
Texture Units 8
Vertex Textures 8
Combined Textures 8
Viewport Size 2048x2048
Renderbuffer Size 2048x2048
Cubemap Size 2048x2048
Vertex Attributes 16
Vertex Uniforms 128
Varying Vectors 8
Fragment Uniforms 64
Vertex Numeric Precision
Low Int [-2^8, 2^8]
Medium Int [-2^11, 2^11]
High Int [-2^24, 2^24]
Low Float [-2^1, 2^1], 2^-8
Medium Float [-2^14, 2^14], 2^-10
High Float [-2^126, 2^126], 2^-23
Fragment Numeric Precision
Low Int [-2^8, 2^8]
Medium Int [-2^11, 2^11]
High Int [-2^24, 2^24]
Low Float [-2^1, 2^1], 2^-8
Medium Float [-2^14, 2^14], 2^-10
High Float [-2^126, 2^126], 2^-23
Compressed Texture Formats
ETC1
Extensions
GL_EXT_debug_marker GL_OES_rgb8_rgba8 GL_OES_depth24 GL_OES_vertex_half_float GL_OES_texture_float GL_OES_texture_half_float GL_OES_element_index_uint GL_OES_mapbuffer GL_OES_fragment_precision_high GL_OES_compressed_ETC1_RGB8_texture GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_required_internalformat GL_OES_depth_texture GL_OES_get_program_binary GL_OES_packed_depth_stencil GL_OES_standard_derivatives GL_OES_vertex_array_object GL_OES_egl_sync GL_EXT_multi_draw_arrays GL_EXT_texture_format_BGRA8888 GL_EXT_discard_framebuffer GL_EXT_shader_texture_lod GL_IMG_shader_binary GL_IMG_texture_compression_pvrtc GL_IMG_texture_npot GL_IMG_texture_format_BGRA8888 GL_IMG_read_format GL_IMG_program_binary GL_IMG_multisampled_render_to_texture
Graphic Modes (RGBA 32bit)
RGB 16bit (565)
RGB 16bit (565), Depth 24bit, Stencil 8bit
RGB 16bit (565), Depth 24bit, Stencil 8bit, Samples x4
RGB 32bit (888)
RGB 32bit (888), Depth 24bit, Stencil 8bit
RGB 32bit (888), Depth 24bit, Stencil 8bit, Samples x4
RGBA 32bit (8888)
RGBA 32bit (8888), Depth 24bit, Stencil 8bit
RGBA 32bit (8888), Depth 24bit, Stencil 8bit, Samples x4
Features (27)
Graphics
OpenGL 2.0
Android Hardware
android.hardware.bluetooth
android.hardware.camera
android.hardware.camera.autofocus
android.hardware.camera.front
android.hardware.faketouch
android.hardware.location
android.hardware.location.gps
android.hardware.location.network
android.hardware.microphone
android.hardware.screen.landscape
android.hardware.screen.portrait
android.hardware.sensor.accelerometer
android.hardware.sensor.compass
android.hardware.sensor.light
android.hardware.sensor.proximity
android.hardware.telephony
android.hardware.telephony.gsm
android.hardware.touchscreen
android.hardware.touchscreen.multitouch
android.hardware.touchscreen.multitouch.distinct
android.hardware.touchscreen.multitouch.jazzhand
android.hardware.usb.accessory
android.hardware.wifi
android.hardware.wifi.direct
Android Software
android.software.live_wallpaper
Google
com.google.android.feature.GOOGLE_BUILD
Created with Hardware Info 2.1.0
Now that you have this?
Yeoh Bro, use the hide function, its too long & its taking alot of thread space...
PHP:
[hide]
your Hardware Info 2.1.0 content
[/hide]
No, i don't have this hardware, mine is an older version... Refer to this thread here for your hardware...
Do a Factory ROM backup first using this tool here before flashing anything & my tut here...
Google is your best friend...
yuweng said:
Yeoh Bro, use the hide function, its too long & its taking alot of thread space...
PHP:
[hide]
your Hardware Info 2.1.0 content
[/hide]
No, i don't have this hardware, mine is an older version... Refer to this thread here for your hardware...
Do a Factory ROM backup first using this tool here before flashing anything & my tut here...
Google is your best friend...
Click to expand...
Click to collapse
Thanks for your help .. I looked on google, but all other options other writes of the device, which is 1.0 processor version is 1.2.
I really do not understand the camera, I'm happy to say I do not have a 5MP 12MP device but just do not understand how you got into it if it was all up to 8MP write.
I guess the factory ran out of little more than a camera and was thrown into it?
Stock system.img for download Star N9776 Smart Note II (E1911 v77)
everss said:
hi friends, i have a pobleme i flashed a room from chineese forum , but now the wifi & the bluetooth dont work can somebudy upload his stock rom for me ? help wanted pleaze
Click to expand...
Click to collapse
Just in case anyone still needs the stock system image:
http://sdrv.ms/WCJn9Q
Yours,
Alex
---------- Post added at 09:42 AM ---------- Previous post was at 09:33 AM ----------
zetty said:
Hello!! Can you upload the rusian rom pls? n_n
Click to expand...
Click to collapse
It's right here (different from the link provided by yuweng in post # 9 for it's the direct link out of the Russian forum for you don't have to try to understand Russian to find it in their thread):
http://narod.ru/disk/63057799001.c6...76(E1911_V77_GQ2000_OV5647_20120919).rar.html
Greets,
Alex
---------- Post added at 09:47 AM ---------- Previous post was at 09:42 AM ----------
yuweng said:
All ROMs here are for support of obsolete hardware & yours is suppose to be the latest version, my friend & you wouldn't want it...
However, pls do update here when you have receive yours & if its the latest JB with 4.1.2 then i want your boot.img...
Click to expand...
Click to collapse
No, mine were not.
Alex
yuweng said:
You don't need the whole ROM, just replace the file mtk_stp_wmt.ko at /system/lib/modules, reboot & it'll work after that...
Click to expand...
Click to collapse
Hi, I managed (after long troubleshooting) to root the phone and replace mtk_stp_wmt.ko with the one provided by you and, after rebooting, I keep without wifi and BT.
Any other option? Thanks.
Hi Devs, any plans to include support for the Tegra K1 soc? I just bought a Xiaomi Mipad and MXPlayer is proving to be flaky with frequent crashes and closing. It also shows strange behavior when playing back HI10p videos, the native player on the Mipad fails to play Hi10p but MxPlayer can be invoked to use HW or HW+ on the Hi10p videos. However I see colors bleeding in the video so I presume that MXplayer is forcing the Tegra K1 to play Hi10p as 8 bit h264 as the effect looks similar on my set top box.
Just an FYI for those hoping the Tegra K1 would be fast enough to play back Hi10p 1080p video in software mode it still stutters. If you need some debug logs etc then pls send me instructions to get those.
Kantana said:
Hi Devs, any plans to include support for the Tegra K1 soc? I just bought a Xiaomi Mipad and MXPlayer is proving to be flaky with frequent crashes and closing. It also shows strange behavior when playing back HI10p videos, the native player on the Mipad fails to play Hi10p but MxPlayer can be invoked to use HW or HW+ on the Hi10p videos. However I see colors bleeding in the video so I presume that MXplayer is forcing the Tegra K1 to play Hi10p as 8 bit h264 as the effect looks similar on my set top box.
Just an FYI for those hoping the Tegra K1 would be fast enough to play back Hi10p 1080p video in software mode it still stutters. If you need some debug logs etc then pls send me instructions to get those.
Click to expand...
Click to collapse
Just an update I tested Hi10p and h265 with VLC and it looks like the Tegra K1 can hw accelerate Hi10p but not h265, however both codecs @ 1080p plays smoothly with VLC on the Mipad. Devs pls update the MXplayer for the Tegra K1 soc
Ok, have narrowed down the cause of crashing and closing to the launcher. If HW+ is enabled this will happen 50% of the time. If I enable HW+ but not check the boxes for local or network play it will start the video normally in HW mode. But there is no audio and I need to manually choose HW+ mode. If it doesn't crash to the launcher then audio will play. I get regular MX player has stopped when I exit MXplayer after using HW+.
I see the same behavior for Diceplayer so assume that it also uses the same methods for hardware acceleration. VLC beta has no issues even with full acceleration and YUV color space. Devs pls look into this and if you need diagnostic or logging info we can assist as there are some MiPad owners out there that are testing this unit right now:
http://forum.xda-developers.com/showthread.php?p=54045235
Kantana said:
Ok, have narrowed down the cause of crashing and closing to the launcher. If HW+ is enabled this will happen 50% of the time. If I enable HW+ but not check the boxes for local or network play it will start the video normally in HW mode. But there is no audio and I need to manually choose HW+ mode. If it doesn't crash to the launcher then audio will play. I get regular MX player has stopped when I exit MXplayer after using HW+.
I see the same behavior for Diceplayer so assume that it also uses the same methods for hardware acceleration. VLC beta has no issues even with full acceleration and YUV color space. Devs pls look into this and if you need diagnostic or logging info we can assist as there are some MiPad owners out there that are testing this unit right now:
http://forum.xda-developers.com/showthread.php?p=54045235
Click to expand...
Click to collapse
If your video plays well in HW mode but not getting audio means the audio codec is not supported by your device.
You can enable SW audio from Settings 》 Decoder to play audio through ffmpeg. Video will be decoded by the hardware as usual.
---------- Post added at 06:14 PM ---------- Previous post was at 06:07 PM ----------
@Kantana
Use mx log collector app immediately after crash to collect the logs and attach here...!!!
That could be true since the audio is DTS which is not supported normally. However I can play back the video with audio from the system video player which implies that both video and audio are supported by the hardware.
Ok here is the first crash when HW+ has been enabled and used. When I exit Mxplayer then it will generate this crash. Logs attached
Here is the 2nd crash when HW+ has been enabled and ticked for local and network. I click on the file and choose mxplayer to play the file, it starts then crashes.
The system details for these 2 crashes:
=========================
Manufacturer: Xiaomi
Model: MI PAD
Brand: Xiaomi
Version: 4.4.2 (REL)
Build: Xiaomi/mocha/mocha:4.4.2/KOT49H/KXFCNBF2.0:user/release-keys
Kernel: Linux version 3.10.24-g5858f73 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Fri Jun 27 10:07:03 CST 2014
CPU: 4 core(s) 2.22 GHz
CPU architecture: 7
CPU features: swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
Board platform: tegra
Instruction set: armeabi-v7a (+armeabi)
Resolution: 1536 x 2048
Available screen size (DIP): 768 x 999 (smallest: 768)
Tablet: true
Screen size: X-Large
Density: 2.0 (320)
Font scale: 1.0
Hardware main button: false
Locale: en_US
Total memory: 1982052 kB
Free memory: 249704 kB
=========================
=========================
Manufacturer: Xiaomi
Model: MI PAD
Brand: Xiaomi
Version: 4.4.2 (REL)
Build: Xiaomi/mocha/mocha:4.4.2/KOT49H/KXFCNBF2.0:user/release-keys
Kernel: Linux version 3.10.24-g5858f73 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Fri Jun 27 10:07:03 CST 2014
CPU: 4 core(s) 2.22 GHz
CPU architecture: 7
CPU features: swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
Board platform: tegra
Instruction set: armeabi-v7a (+armeabi)
Resolution: 1536 x 2048
Available screen size (DIP): 768 x 999 (smallest: 768)
Tablet: true
Screen size: X-Large
Density: 2.0 (320)
Font scale: 1.0
Hardware main button: false
Locale: en_US
Total memory: 1982052 kB
Free memory: 151892 kB
=========================
Kantana said:
Hi Devs, any plans to include support for the Tegra K1 soc? I just bought a Xiaomi Mipad and MXPlayer is proving to be flaky with frequent crashes and closing. It also shows strange behavior when playing back HI10p videos, the native player on the Mipad fails to play Hi10p but MxPlayer can be invoked to use HW or HW+ on the Hi10p videos. However I see colors bleeding in the video so I presume that MXplayer is forcing the Tegra K1 to play Hi10p as 8 bit h264 as the effect looks similar on my set top box.
Just an FYI for those hoping the Tegra K1 would be fast enough to play back Hi10p 1080p video in software mode it still stutters. If you need some debug logs etc then pls send me instructions to get those.
Click to expand...
Click to collapse
I am in the same problem,Mipad,the system player is ok to run the video,but with MX,the HW+ mode usually crashed,when using HW mode,there is a chance the audio have problem,I need to use the SW mode for the audio.
I checked the video type that have the HW+ and no audio problem,they are H264 and AC3,strange thing is that some other video in the same type is ok to run with HW+ Mode,i am sure the video itself is no problem,i have checked it with my nexus 7 PAD.
Maybe it is the system's problem
07-10 20:52:55.872 12496 12679 F libc : invalid address or address of corrupt block 0x731648e8 passed to dlfree
07-10 20:52:55.872 12496 12679 F libc : Fatal signal 11 (SIGSEGV) at 0xdeadbaad (code=1), thread 12679 (.videoplayer.ad)
On both logs there is a fatal error from libc
@bleu8888
Can you look at the issue?
---------- Post added at 01:01 AM ---------- Previous post was at 12:30 AM ----------
@kantana @donkeyear
I have discussed with the developer about your issue.
As I said libc fatal error may be due to a compiler error.
In another device we had similar crashing which is fixed in the latest test build by using the latest compiler.
Can you test the latest test build from the following link & report here. It will be helpful to resolve the issue.
https://sites.google.com/site/mxvpen/translation/test-build
ktsamy said:
07-10 20:52:55.872 12496 12679 F libc : invalid address or address of corrupt block 0x731648e8 passed to dlfree
07-10 20:52:55.872 12496 12679 F libc : Fatal signal 11 (SIGSEGV) at 0xdeadbaad (code=1), thread 12679 (.videoplayer.ad)
On both logs there is a fatal error from libc
@bleu8888
Can you look at the issue?
---------- Post added at 01:01 AM ---------- Previous post was at 12:30 AM ----------
@kantana @donkeyear
I have discussed with the developer about your issue.
As I said libc fatal error may be due to a compiler error.
In another device we had similar crashing which is fixed in the latest test build by using the latest compiler.
Can you test the latest test build from the following link & report here. It will be helpful to resolve the issue.
https://sites.google.com/site/mxvpen/translation/test-build
Click to expand...
Click to collapse
No luck, still crashing randomly with test build. If HW+ is enabled it's crashing 50% of the time. It looks stable with HW+ off but sometimes no sound even with files where the audio codec is supported in hardware eg mp3 or ac3. When I enable HW+ then same random crashing.
Kantana said:
No luck, still crashing randomly with test build. If HW+ is enabled it's crashing 50% of the time. It looks stable with HW+ off but sometimes no sound even with files where the audio codec is supported in hardware eg mp3 or ac3. When I enable HW+ then same random crashing.
Click to expand...
Click to collapse
I have already conveyed this issue.
We had same issue when Tegra 3 was released. But, even NVidia people where unable to fix. Finally it was fixed by a volunteer on ffmpeg.
The developer will try to resolve the issue as soon as possible....!!
Till that use SW audio by default if you are encounter audio issues in HW mode
---------- Post added at 01:38 AM ---------- Previous post was at 01:36 AM ----------
@Kantana
Can you collect a log when you face audio issue in hw mode?
ktsamy said:
I have already conveyed this issue.
We had same issue when Tegra 3 was released. But, even NVidia people where unable to fix. Finally it was fixed by a volunteer on ffmpeg.
The developer will try to resolve the issue as soon as possible....!!
Till that use SW audio by default if you are encounter audio issues in HW mode
---------- Post added at 01:38 AM ---------- Previous post was at 01:36 AM ----------
@Kantana
Can you collect a log when you face audio issue in hw mode?
Click to expand...
Click to collapse
Hi ktsamy, here are the logs from playing a video in HW mode with no audio:
=========================
Manufacturer: Xiaomi
Model: MI PAD
Brand: Xiaomi
Version: 4.4.2 (REL)
Build: Xiaomi/mocha/mocha:4.4.2/KOT49H/KXFCNBF2.0:user/release-keys
Kernel: Linux version 3.10.24-g5858f73 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Fri Jun 27 10:07:03 CST 2014
CPU: 4 core(s) 2.22 GHz
CPU architecture: 7
CPU features: swp half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt
Board platform: tegra
Instruction set: armeabi-v7a (+armeabi)
Resolution: 1536 x 2048
Available screen size (DIP): 768 x 999 (smallest: 768)
Tablet: true
Screen size: X-Large
Density: 2.0 (320)
Font scale: 1.0
Hardware main button: false
Locale: en_US
Total memory: 1982052 kB
Free memory: 151352 kB
=========================
Format : Matroska
Format version : Version 2
File size : 2.18 GiB
Duration : 44mn 1s
Overall bit rate : 7 084 Kbps
Encoded date : UTC 2012-10-11 10:07:06
Writing application : mkvmerge v2.9.0 ('Moanin'') built on May 22 2009 17:46:31
Writing library : libebml v0.7.7 + libmatroska v0.8.1
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 5 frames
Codec ID : V_MPEG4/ISO/AVC
Duration : 44mn 1s
Bit rate : 6 439 Kbps
Width : 1 280 pixels
Height : 720 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.291
Stream size : 1.94 GiB (89%)
Writing library : x264 core 128 r2216 198a7ea
Encoding settings : cabac=1 / ref=5 / deblock=1:-1:-1 / analyse=0x3:0x113 / me=umh / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=12 / lookahead_threads=2 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=2 / b_bias=0 / direct=3 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=23 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=2pass / mbtree=1 / bitrate=6439 / ratetol=1.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / cplxblur=20.0 / qblur=0.5 / vbv_maxrate=50000 / vbv_bufsize=50000 / nal_hrd=none / ip_ratio=1.40 / aq=1:1.00
Language : English
Default : Yes
Forced : No
Audio
ID : 2
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : A_AC3
Duration : 44mn 1s
Bit rate mode : Constant
Bit rate : 640 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 202 MiB (9%)
Language : English
Default : Yes
Forced : No
It looks like an issue of hw+ decoder.
I ordered a MiPad and now waiting.
bleu8888 said:
It looks like an issue of hw+ decoder.
I ordered a MiPad and now waiting.
Click to expand...
Click to collapse
Well this has taught me to not take anything for granted with chinese tablets. They appear to have so many bugs on release and not subtle ones but major functions. You'll have a ball working around all these oversights. I'm quite pleased with the Mipad subject to them fixing these bugs.
Kantana said:
Well this has taught me to not take anything for granted with chinese tablets. They appear to have so many bugs on release and not subtle ones but major functions. You'll have a ball working around all these oversights. I'm quite pleased with the Mipad subject to them fixing these bugs.
Click to expand...
Click to collapse
> Well this has taught me to not take anything for granted with chinese tablets.
Understatement of the year
Still, per your original post, it's kinda disappointing to hear that the Tegra K1 doesn't have enough power to play Hi10p 1080p with SW mode.
I looked at the K1's specs sheet, and with a quad core A15 2.3Ghz, I would have thought for sure it was enough power...
CDB-Man said:
> Well this has taught me to not take anything for granted with chinese tablets.
Understatement of the year
Still, per your original post, it's kinda disappointing to hear that the Tegra K1 doesn't have enough power to play Hi10p 1080p with SW mode.
I looked at the K1's specs sheet, and with a quad core A15 2.3Ghz, I would have thought for sure it was enough power...
Click to expand...
Click to collapse
It's hard to tell until devs update their apps to optimize for the Tegra K1. Software is never optimal for high bitrates. The Hi10p I am testing is 7.2Mbit/s average but in certain scenes it goes over 10Mbit/s. MXplayer and Dice player are for sure using software, if I invoke HW+ mode it speeds up but I see color blotches all over the picture similar to when playing Hi10p on unsupported hardware or codecs.
VLC beta I have it all set for hardware acceleration and the playback is perfect but the amount of heat generated and battery drain leads me to suspect it is only partially accelerated.
Once the devs optimize for the Tegra K1 we'll have a clearer picture on the capabilities of the Tegra K1.
As an aside even with h265/HEVC it was easier to play smoothly since lower bit rates:
Format : Matroska
Format version : Version 1
File size : 824 MiB
Duration : 43mn 29s
Overall bit rate : 2 649 Kbps
Writing application : DivXMKVMux 9.8.10.8454
Writing library : libDivXMediaFormat 4.0.0.0578
Video
ID : 1
Format : HEVC
Format/Info : High Efficiency Video Coding
Codec ID : V_MPEGH/ISO/HEVC
Duration : 43mn 29s
Width : 1 920 pixels
Height : 1 072 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 fps
Language : English
Default : Yes
Forced : No
Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : A_AAC
Duration : 43mn 29s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 44.1 KHz
Compression mode : Lossy
Language : un
Default : Yes
Forced : No
Kantana said:
It's hard to tell until devs update their apps to optimize for the Tegra K1. Software is never optimal for high bitrates. The Hi10p I am testing is 7.2Mbit/s average but in certain scenes it goes over 10Mbit/s. MXplayer and Dice player are for sure using software, if I invoke HW+ mode it speeds up but I see color blotches all over the picture similar to when playing Hi10p on unsupported hardware or codecs.
VLC beta I have it all set for hardware acceleration and the playback is perfect but the amount of heat generated and battery drain leads me to suspect it is only partially accelerated.
Once the devs optimize for the Tegra K1 we'll have a clearer picture on the capabilities of the Tegra K1.
As an aside even with h265/HEVC it was easier to play smoothly since lower bit rates:
Format : Matroska
Format version : Version 1
File size : 824 MiB
Duration : 43mn 29s
Overall bit rate : 2 649 Kbps
Writing application : DivXMKVMux 9.8.10.8454
Writing library : libDivXMediaFormat 4.0.0.0578
Video
ID : 1
Format : HEVC
Format/Info : High Efficiency Video Coding
Codec ID : V_MPEGH/ISO/HEVC
Duration : 43mn 29s
Width : 1 920 pixels
Height : 1 072 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 23.976 fps
Language : English
Default : Yes
Forced : No
Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : A_AAC
Duration : 43mn 29s
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 44.1 KHz
Compression mode : Lossy
Language : un
Default : Yes
Forced : No
Click to expand...
Click to collapse
VLC reders clearly because by default it uses RGB 32bit video chroma while MX Player uses RGB 16bit by default. RGB 32bit need more processor power. That's why it leads to heat up issue. You can use RGB 32bit in MX Player too by changing the Settings 》 Decoder 》 Color format to RGB 32bit.
ktsamy said:
VLC reders clearly because by default it uses RGB 32bit video chroma while MX Player uses RGB 16bit by default. RGB 32bit need more processor power. That's why it leads to heat up issue. You can use RGB 32bit in MX Player too by changing the Settings 》 Decoder 》 Color format to RGB 32bit.
Click to expand...
Click to collapse
Tried that but it didn't help for Hi10p. Both HW and HW+ mode gives the blotchy/blocky renders with pink tint. I've attached a screen capture from MX player and one from VLC. SW mode doesn't have this issue on MX player but it will stutter.
H265 is played in HW on the Mipad, but still no Hi10p support in hardware. The stock video player plays h265.