LineageOS 17 How to install SM-J8 - Miscellaneous Android Development

/*
* Your warranty is no longer valid.(or it isn't ? who am I to judge)
*
* I am not responsible for bricked devices, dead SD cards, broken touchscreens,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this package
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
LineageOS 17 How to install SM-J8 ~vks
DISCLAIMAR: It is a gsi and not a ROM. I am not responsible for anything ,
proceed at your own risk , All files are properties of their respective owner.
What works (TESTED ON SM-J810G)
-Calls , SMS
-Data (Enable LTE in data setting , default edge)
-Fingerprint
-Both Camera and Flash
-Audio
-Screen Mirroring
-Basically everything
What dosen't work
-No bugs , Everything works , stable too.
IMPORTANT:You will need an android10 stock vendor.
The incuded .zip contains
-Odin3
-Odin Flashable TWRP , By @goldfish07 (Telegram grpoup = https://t.me/galaxyj8 )
-Tryfix lockscreen.zip
-Magisk v21.zip
-Disable-Dm-Verity.zip
-Open-gapps-pico-arm-10.zip (Propietary)
-Lineage-17.img (Non compressed/zipped iso)
Unzip the container file , and copy all these to sd card or an otg pendrive(recomended)
, PC MTP Dosent work in recovery.
Procedure.
1. Flash TWRP with ODIN (Lookup for procedure , and install drivers)
2. Boot into Custom Recovery
3. Wipe > Format_Data > Type yes (Swipe to reset dosen't work, data backup-
-would be a good idea)
4.Navigate to your copied files , select Flash image > Lineage-17.img , Flash in system.
5.Go to wipe (after flash), Advanced wipe > System > Repair or change File System >-
-Resize File System (This Prevents Error70 Insufficient Space in Gapps)
6.Flash Gapps (select Flah from Zip) , If flash shows Error70 , Repeat From Step 3.
7.Flash Disable-Dm-Verity.zip (To prevent Stuck on boot animation of the os)
8.Flash Magisk v21.zip (To prevent Bootloop to bootloader , and to-
-actually start booting into os ; V20 , V18 dosen't work)
9.Flash Tryfix lockscreen.zip (To get lockscreen secure lock working as well as
fingerprint , and also prevents bootloop due to magisk)
10.Reboot to recovery again , and then to system. (Helps mount files and stuff)
11.Setup and enjoy, to remove the persistent notif , uncheck in setting.
IF YOU NEED ROOT IF IT ISINT THERE ALREADY
1.Reboot to recovery , Flash Magisk v21.zip (Only flash this to prevent bootloop
, and to bootloop to bootloader)
2.Flash Tryfix lockscreen.zip ( To be on the safer side , and prevent bootloop)
3.Enjoy!
Fixed:
1.Bootloop to BootLoader
2.Bootloop
3.Stuck on Bootanimation
4.Secure Lockscreen
5.Gapps Flash Error70 No space
6.FingerPrint
7.Booting
@vanshksingh
SAMSUNG J8/On8 OFFICIAL
Da Rules : 1. English and Hindi Only 2. Offtopic = a lil bit. 3. ETA = allowed 4. Respect All Admins 5. Reviewers always allowed.
t.me

vanshksingh said:
/*
* Your warranty is no longer valid.(or it isn't ? who am I to judge)
*
* I am not responsible for bricked devices, dead SD cards, broken touchscreens,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this package
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
LineageOS 17 How to install SM-J8 ~vks
DISCLAIMAR: It is a gsi and not a ROM. I am not responsible for anything ,
proceed at your own risk , All files are properties of their respective owner.
What works (TESTED ON SM-J810G)
-Calls , SMS
-Data (Enable LTE in data setting , default edge)
-Fingerprint
-Both Camera and Flash
-Audio
-Screen Mirroring
-Basically everything
What dosen't work
-No bugs , Everything works , stable too.
IMPORTANT:You will need an android10 stock vendor.
The incuded .zip contains
-Odin3
-Odin Flashable TWRP , By @goldfish07 (Telegram grpoup = https://t.me/galaxyj8 )
-Tryfix lockscreen.zip
-Magisk v21.zip
-Disable-Dm-Verity.zip
-Open-gapps-pico-arm-10.zip (Propietary)
-Lineage-17.img (Non compressed/zipped iso)
Unzip the container file , and copy all these to sd card or an otg pendrive(recomended)
, PC MTP Dosent work in recovery.
Procedure.
1. Flash TWRP with ODIN (Lookup for procedure , and install drivers)
2. Boot into Custom Recovery
3. Wipe > Format_Data > Type yes (Swipe to reset dosen't work, data backup-
-would be a good idea)
4.Navigate to your copied files , select Flash image > Lineage-17.img , Flash in system.
5.Go to wipe (after flash), Advanced wipe > System > Repair or change File System >-
-Resize File System (This Prevents Error70 Insufficient Space in Gapps)
6.Flash Gapps (select Flah from Zip) , If flash shows Error70 , Repeat From Step 3.
7.Flash Disable-Dm-Verity.zip (To prevent Stuck on boot animation of the os)
8.Flash Magisk v21.zip (To prevent Bootloop to bootloader , and to-
-actually start booting into os ; V20 , V18 dosen't work)
9.Flash Tryfix lockscreen.zip (To get lockscreen secure lock working as well as
fingerprint , and also prevents bootloop due to magisk)
10.Reboot to recovery again , and then to system. (Helps mount files and stuff)
11.Setup and enjoy, to remove the persistent notif , uncheck in setting.
IF YOU NEED ROOT IF IT ISINT THERE ALREADY
1.Reboot to recovery , Flash Magisk v21.zip (Only flash this to prevent bootloop
, and to bootloop to bootloader)
2.Flash Tryfix lockscreen.zip ( To be on the safer side , and prevent bootloop)
3.Enjoy!
Fixed:
1.Bootloop to BootLoader
2.Bootloop
3.Stuck on Bootanimation
4.Secure Lockscreen
5.Gapps Flash Error70 No space
6.FingerPrint
7.Booting
@vanshksingh
SAMSUNG J8/On8 OFFICIAL
Da Rules : 1. English and Hindi Only 2. Offtopic = a lil bit. 3. ETA = allowed 4. Respect All Admins 5. Reviewers always allowed.
t.me
Click to expand...
Click to collapse
What is the android 10 stock vendor and how can i get it?
Can i have the j8 vendor zip file?

j810guser said:
What is the android 10 stock vendor and how can i get it?
Can i have the j8 vendor zip file?
Click to expand...
Click to collapse
The vendor file is already there if you ever had android 10 stock running

vanshksingh said:
The vendor file is already there if you ever had android 10 stock running
Click to expand...
Click to collapse
But in game of roms vid, he says a vendor zip file is required..

And do i have to delete system, data, cache, etc? or do i flash it over stock?

j810guser said:
And do i have to delete system, data, cache, etc? or do i flash it over stock?
Click to expand...
Click to collapse
Vendor is the interface between your hardware and software , and the one sent over OTA sock is what you need , and well if you go do havoc is please follow this guide , just flash havoc instead on lineage
And rest just follow this , I would say don't delete the system flash over it , as it gets formated anyways

j810guser said:
But in game of roms vid, he says a vendor zip file is required..
Click to expand...
Click to collapse
Clearly you don't , or well atleast in this flash it's already there , if you had android 10 stock

Thanks!

Is a kernel available for kali nethunter on galaxy j8?

reboots to download mode or stuck in powered by android screen.. and i can't mount internal storage in orangefox...

Nevermind! THANKS SO MUCH!!!!

j810guser said:
Nevermind! THANKS SO MUCH!!!!
Click to expand...
Click to collapse
The mount problem can be fixed by rebooting to recovery and yes you need to flash magisk and dm verity and lockscreen fix for the first non-stick boot , or after a stock reflash

Do you have the device tree of samsung j8? Please... I need android 10, 9, 8.1, or 7... Thanks!

Darklord071 said:
Do you have the device tree of samsung j8? Please... I need android 10, 9, 8.1, or 7... Thanks!
Click to expand...
Click to collapse
SAMSUNG J8/On8 OFFICIAL
Da Rules : 1. English and Hindi Only 2. Offtopic = a lil bit. 3. ETA = allowed 4. Respect All Admins 5. Reviewers always allowed.
t.me
here you can ask from @goldfish07 , he can help in this .

vanshksingh said:
SAMSUNG J8/On8 OFFICIAL
Da Rules : 1. English and Hindi Only 2. Offtopic = a lil bit. 3. ETA = allowed 4. Respect All Admins 5. Reviewers always allowed.
t.me
here you can ask from @goldfish07 , he can help in this .
Click to expand...
Click to collapse
Can you put me in contact with him? I tried mailing him but no reply... Is it possible for you to make a ubuntu touch port for sm-j810g? Or do you have the device tree? Thanks!

Can you help? Do you have a discord?

Darklord071 said:
Can you put me in contact with him? I tried mailing him but no reply... Is it possible for you to make a ubuntu touch port for sm-j810g? Or do you have the device tree? Thanks!
Click to expand...
Click to collapse
Please

Darklord071 said:
Can you put me in contact with him? I tried mailing him but no reply... Is it possible for you to make a ubuntu touch port for sm-j810g? Or do you have the device tree? Thanks!
Click to expand...
Click to collapse
Please help

vanshksingh said:
SAMSUNG J8/On8 OFFICIAL
Da Rules : 1. English and Hindi Only 2. Offtopic = a lil bit. 3. ETA = allowed 4. Respect All Admins 5. Reviewers always allowed.
t.me
here you can ask from @goldfish07 , he can help in this .
Click to expand...
Click to collapse
help

Darklord071 said:
Please help
Click to expand...
Click to collapse
yes it is possible , you shoul watch live porting video if you wanna attempt , it has many syntax errors so it is not straight forward , you will need to know python a bit to debug

Related

[ROM] [G906S/K] Korean S5

This ROM is for the KOREAN version of the Galaxy S5 with Snapdragon 805 -- G906S and K906K
LATEST VERSION CONFIRMED WORKING FOR THE G906L. See here
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
ROOT AND CUSTOM RECOVERY
Please go to this thread to get the custom recovery and how to root your device.
prodigiez has done an incredible job of finding and maintaining all the pieces that we need to root and play with our devices.
Per that thread: Do not wipe/factory reset to install this ROM. That may soft brick your phone. Just install the ROM on top of your stock ROM.
ROM FEATURES:
rooted
Doedex
Busybox
Knox has been removed
Added XPosed
No Wipe
Removed Korean characters from phone keypad
Added S5 International boot animation
SHealth is working with XPosed
Changed 3G to dispplay H or H+ depending on connection (LTE will display the same).
ijotech made an excellent video showing the installation and features of this ROM. You can find it here
Enjoy!
======================================================
TIPS
Thanks to hadinz you can finally have the camera shortcut in your lock screen while using secured lock-screen. Please follow the steps below:
"Go to system/csc/ and rename costumer.xml to costumer.xml.backup and then reboot... go to settings lockscreen/shortcut/camera and done.use root browser for renaming."
This also has the nice side effect to enable "Data Roaming" and VoLTE.
---------------------------------------------------------------------------------------
Please follow ijotech steps to get SHealth working after first boot. Not needed if you are flashing a newer version of the ROM and you already followed this procedure.
0. Optional: Link SHealth to your Samsung account and backup the data
1. Clear SHealth data and Health Services cache and data
2. Start SHealth and configure it (restore from backup)
3. Configure XPosed
======================================================
OTHER FILES AND TOOLS
Original G906S Bootanimation
DOWNLOAD here
MD5: 379deb9f337275dfa155b76b658feb7f
---------------------------------------------------------------------------------------
Add On Zip File for Stock Rooted ROMs -- NJ2
This Zip File includes the following features for Stock Rooted ROMs for those of you who don't want to flash this custom ROM but want these features:
XPosed
SHealth working with XPosed
Removed Korean characters from phone keypad
Added S5 International boot animation
Changed 3G to display H or H+ depending on connection (LTE will display the same).
DOWNLOAD here
MD5: df64e5339b0e6486b33aac2aa684363d
Install from custom recovery.
If you only want to replace the Dialer to remove the Korean characters, you can download the Replace_Keypad.zip file found at the end of this post. Once downloaded, unpack the file and double click on Replace_Keypad.bat.
If you only want to replace 4G with H/H+, you can download the Replace_4G.zip file found at the end of this post. Once downloaded, unpack the file and double click on Replace_4G.bat.
---------------------------------------------------------------------------------------
EFS BACKUP/RESTORE TOOL
I have put together a small batch file for Windows to backup and restore the EFS partition.
You must be rooted for this to work.
Download link and screenshots are at the bottom of this post.
BY USING THIS BATCH FILE YOU ACCEPT THAT I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR DEVICE
---------------------------------------------------------------------------------------
MODEMS
WARNING: CHOOSE THE MODEM ACCORDING TO YOUR DEVICE: S OR K
To flash: Download the file that you need for your device. **DO NOT** extract the contents of the file. Flash with ODIN in download mode. In Odin add the file in CP.
Only use Odin 3.09 from here
If the modem is not updated, flash again the file.
MODEM G906S NJ2 -- Download here
MD5: b2fe7405a7dbb86f5bcc7f1aa3ff0c4f
MODEM G906K NK1 -- Download here
MD5: 6eb7a51ab6364df1fb4f05ccd6e08e29
======================================================
ROM DOWNLOADS
UPDATE 2014-11-22
UNIFIED VERSION FOR: S AND K
ROM FOR G906 K and S BASED ON G906KKTU1ANK1
Download here
MD5: 1ec741dd9754d5b925a36e2e431648bb
Change Log:
New Base change
Reported working: Hidden Menu and Voice Recording, and everything else!
========================================
Donations are not required, but are appreciated.
very good thread
great... Miscom rom
Thanks for the rom.
This phone is great + this Rom it becomes the best of the best
Can I use this rom on my tmobile Gs5? Thanks
Sent from my SM-G900T using XDA Free mobile app
Good job pal.. Thx for the contribution
xda23 said:
Can I use this rom on my tmobile Gs5? Thanks
Sent from my SM-G900T using XDA Free mobile app
Click to expand...
Click to collapse
No. He says at the top it is for the Korean 805 version.
miscom said:
This ROM is for the KOREAN version of the Galaxy S5 with Snapdragon 805 -- G906S and K906K
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
ROOT AND CUSTOM RECOVERY
Please go to this thread to get the custom recovery and how to root your device.
prodigiez has done an incredible job of finding and maintaining all the pieces that we need to root and play with our devices.
Per that thread: Do not wipe/factory reset to install this ROM. That may damage your phone. Just install the ROM on top of your stock ROM.
ROM FEATURES:
rooted
Doedex
Busybox
Knox has been removed
Added XPosed
No Wipe
Removed Korean characters from phone keypad
Added S5 International boot animation
SHealth is working with XPosed
Changed 3G to dispplay H or H+ depending on connection (LTE will display the same).
Enjoy!
========================================
Original G906S Bootanimation
DOWNLOAD here
MD5: 379deb9f337275dfa155b76b658feb7f
========================================
UPDATE 2014-08-06
ROM BASED ON G906KKTU1ANG8 v1.1a
Download here
MD5: e93fd16ade9baf75c857737df0e46f10
--------------------------------------------------------------------------------
UPDATE 2014-08-14
ROM BASED ON G906KKTU1ANH2 v1
Download here
MD5: 25c4fcaa1ae24ff8ba49178ba0db10e4
Change Log:
Just base change
========================================
Please follow ijotech steps to get SHealth working after first boot. Not needed if you are flashing a newer version of the ROM and you already followed this procedure.
0. Optional: Link SHealth to your Samsung account and backup the data
1. Clear SHealth data and Health Services cache and data
2. Start SHealth and configure it (restore from backup)
3. Configure XPosed
========================================
Click to expand...
Click to collapse
Great work. I imagine that you must download the zip and install from recovery and use the option install zip and you search the file.
My question is why can whe not wipe the phone?
Can whe use the other option of CWM for format the data internal memory?
Is there some video on YouTube to see the options of these ROM? Have you included some auto update for future updates or must she reinstall all the new version?
Which of the 2 files is the latest version the v1.0 or v.1.1
Must whe install bootlogo or is it optional?
pollet82 said:
Great work. I imagine that you must download the zip and install from recovery and use the option install zip and you search the file.
My question is why can whe not wipe the phone?
Can whe use the other option of CWM for format the data internal memory?
Is there some video on YouTube to see the options of these ROM? Have you included some auto update for future updates or must she reinstall all the new version?
Which of the 2 files is the latest version the v1.0 or v.1.1
Must whe install bootlogo or is it optional?
Click to expand...
Click to collapse
Yes, you download the ZIP file and flash it from recovery. There is a bug in the only available CWM recovery. If you need to wipe data, I would recommend that you format the data partition. Never use Wipe/Factory Reset.
I don't have any videos for the ROM features. Besides the changes listed in the OP, this is pure stock. Everytime that there is an update you would have to download the new ZIP file and flash it from recovery.
No need to install the Boot animation unless you want the Korean boot animation back.
The ROM versions are based on the Samsung versions and the changes I make to each version.
For instance, the Samsung version is NG8 and is followed by 1.1a it means that I have made a few revisions to the ROM based on NG8.
After NG8 came NH2 (H after G) and the ROM based on version NH2 has only had one revision (version 1).
I hope that this makes sense. Always look at the update date to determine which one is the latest version.
I will make a video of this rom if you like and post it on my youtube channel. Like a video tour
ijotech said:
I will make a video of this rom if you like and post it on my youtube channel. Like a video tour
Click to expand...
Click to collapse
That would be great! Thank you!
Let us know once done.
install and overview of his rom Video
http://youtu.be/4aomOpDVhbM
http://youtu.be/4aomOpDVhbM
i made this video youtube still processing it but soon it will be up
miscom said:
That would be great! Thank you!
Let us know once done.
Click to expand...
Click to collapse
Is there any way to get rid of the annoying "set warranty bit:kernel" message once you've installed the custom ROM?
Also same question for the korean characters on the boot logo.
Thanks a lot in advance!
OliTc said:
Is there any way to get rid of the annoying "set warranty bit:kernel" message once you've installed the custom ROM?
Also same question for the korean characters on the boot logo.
Thanks a lot in advance!
Click to expand...
Click to collapse
As far as I know, The "set warranty bit:kernel" is either coming from the recovery's kernel or the ROM's kernel. Both have been modified not conforming to the Samsung security model. Therefore the message.
Those Korean characters are coming from the bootloader itself prior to loading Android's kernel. I am not sure how to modify that. Maybe Hex Editing the boatloader file and flashing it back with Odin?
Hey Miscom:
I really appreciate your development with the G906S/K. There aren't many devs for this device yet so you are a pioneer in the field!
Couple quick questions:
Does the international Samsung boot animation you added in replace the branded animation?
Let me elaborate: so initially the phone boots up saying S5 LTE-A, then followed up by the corresponding telecommunication company animation. So SKT on the G906S and Olleh on the G906S.
That bloat ware animation is the one that is removed and replaced, right?
Secondly, is the H/H+ vanilla to other phone variants of TouchWiz?
Also could you enlighten me on the following features:
Xposed
No Wipe
Thanks man
miscom said:
Yes, you download the ZIP file and flash it from recovery. There is a bug in the only available CWM recovery. If you need to wipe data, I would recommend that you format the data partition. Never use Wipe/Factory Reset.
I don't have any videos for the ROM features. Besides the changes listed in the OP, this is pure stock. Everytime that there is an update you would have to download the new ZIP file and flash it from recovery.
No need to install the Boot animation unless you want the Korean boot animation back.
The ROM versions are based on the Samsung versions and the changes I make to each version.
For instance, the Samsung version is NG8 and is followed by 1.1a it means that I have made a few revisions to the ROM based on NG8.
After NG8 came NH2 (H after G) and the ROM based on version NH2 has only had one revision (version 1).
I hope that this makes sense. Always look at the update date to determine which one is the latest version.
Click to expand...
Click to collapse
Tanks for the answer.
When whe install the roms what options can whe use for erase/format the memory off thease options?
* Wipe Data/Factory Reset
* Wipe Cache Partition
* Advanced -> Wipe Dalvik Cache
* Mounts and Storage -> format /cache
* Mounts and Storage -> format /system
* Mounts and Storage -> format /data
* Mounts and Storage -> format /sdcard
* Mounts and Storage -> format /emmc
Teorical whe can only use format /cache, format /data, format /sdcard and format /emmc is thease right?
xNiNELiVES said:
Hey Miscom:
I really appreciate your development with the G906S/K. There aren't many devs for this device yet so you are a pioneer in the field!
Couple quick questions:
Does the international Samsung boot animation you added in replace the branded animation?
That is correct.
Let me elaborate: so initially the phone boots up saying S5 LTE-A, then followed up by the corresponding telecommunication company animation. So SKT on the G906S and Olleh on the G906S.
That bloat ware animation is the one that is removed and replaced, right? Right.
Secondly, is the H/H+ vanilla to other phone variants of TouchWiz?
Yes. This is the first time that I see a Samsung device not showing H/H+. That's why I made the change as suggested by prodigiez Could this be how it's use in Korea?.
Also could you enlighten me on the following features:
Xposed
No Wipe
XPosed: An advanced framework that allows you to tweak your device to your heart's content. The best way to understand it, it's to use it. Be careful, though, you may do something with that may create issues. In that case just reflash the ROM and start over.
No wipe: The ROM will not wipe the data partition during installation
Thanks man
Click to expand...
Click to collapse
My answers above in red.
pollet82 said:
Tanks for the answer.
When whe install the roms what options can whe use for erase/format the memory off thease options?
* Wipe Data/Factory Reset
* Wipe Cache Partition
* Advanced -> Wipe Dalvik Cache
* Mounts and Storage -> format /cache
* Mounts and Storage -> format /system
* Mounts and Storage -> format /data
* Mounts and Storage -> format /sdcard
* Mounts and Storage -> format /emmc
Teorical whe can only use format /cache, format /data, format /sdcard and format /emmc is thease right?
Click to expand...
Click to collapse
You can format /data and /cache. Never format the SDCard. This would wipe your pictures and other documents that you may have there.
And never format /emmc.
miscom said:
You can format /data and /cache. Never format the SDCard. This would wipe your pictures and other documents that you may have there.
And never format /emmc.
Click to expand...
Click to collapse
Ok, but my propose is to know when i can use thease formats, i mean when i will sell the phone i will erase it completly, then i must use the:
Mounts and Storage -> format /cache
Mounts and Storage -> format /data
Mounts and Storage -> format /sdcard
Mounts and Storage -> format /emmc
Is thease correect?
The format emmc is for the external SD card?
The only think that its not allowed is to wipe the phone?
pollet82 said:
Ok, but my propose is to know when i can use thease formats, i mean when i will sell the phone i will erase it completly, then i must use the:
Mounts and Storage -> format /cache
Mounts and Storage -> format /data
Mounts and Storage -> format /sdcard
Mounts and Storage -> format /emmc
Is thease correect?
The format emmc is for the external SD card?
The only think that its not allowed is to wipe the phone?
Click to expand...
Click to collapse
I see your point now. Yes, you would format /cache, /data and /sdcard. I would **not** format /emmc. I have never done it and I have read that doing that creates issues. I would remove the external SD Card and format it in a PC.

[Fix] [Mt6582 kk] 3G Only Mode , Lock Screen , Proximity Invalid IMEI And Nvram

You're warranty is now void.
Please Read entire Post . . . . . .
Disclaimer . . .
* Remember That flashing Rom can be dangerous to Your Devices .
I take no responsibility for any damages that can happen to your Device.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
*Please do some research if you have any concerns about features inc[/B]included in this ROM
* before flashing it! YOU are choosing to these modifications, and if
* you point the finger at me for messing u make p your device, I will laugh at you
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Fixes tested On Wiko Rainbow - My|Phone Agua rio - Qmobile - For All clones Also For all my Roms
--IMEI And Nvram Fix Installation
*Boot into Recovery
*Find The Imei Fix in A folder
*Wipe Cache (Optional)
* Script Will do all the Things
--Must have
*Custom Recovery
*Busy Box installed
Link : https://www.androidfilehost.com/?fid=24391638059057915
-- Nvram Fix
*Boot Into Recovery
*Find The Nvram Fix In a Folder
Link - https://www.androidfilehost.com/?fid=24391638059057922
-- Lock Screen Fix
-Boot on to Recovery
*Find Screen Lock Fix To a folder
*Fix For
*Face Unlock
*Voice Unclock
*Pattern
*Pin
*Password
-MUst be on
*Custom Recovery
*Busy Box installed
LINK - https://www.androidfilehost.com/?fid=24391638059057922
°Proximity Fix°
*Boot Into Recovery
*Install Proximity Fix In a Folder
*And Reboot !
LINK - https://www.androidfilehost.com/?fid=24438995911974250
---3G Fix Installation
*Run mauimeta 3g tool
*From options select connect smartphone in meta mod
*Press reconnect
*Switch off your phone and connect it to usb. the phone will boot up and stuck on bootLogo
*Now select update parameter from the drop down menu,a popup will appear
*click on change nvram database and select the modem File
*click on load from file and select the ini file
*wait for sometime the barcode check box on below will be automatically checked and will display a message load from file completed
*now click on downlaod to flash,after sometime it will show download to flash completed. now close the popup and press disconnect.
*Phone will turn off. then exit the software and power on the device
Links
*MauiMETA3g EXE.
https://onedrive.live.com/?id=8F11D...d=root&authkey=!AL4F8u9jj3tepio&action=locate
*Tinno Driver FoR wiko Rainbow Clones Only.
https://drive.google.com/file/d/0B1UbNaWJbFYVQThmVFI2cnA0RnM/view?usp=docslist_api
*Auto Drivers https://drive.google.com/file/d/0B1UbNaWJbFYVNEo3RU82MG5uaGs/view?usp=docslist_api
*3G Fix Files https://drive.google.com/file/d/0B1UbNaWJbFYVRUFXWXhLWWc4VWs/view?usp=docslist_api
​
NOTE:
If this Fix Work Do Hit Thanks button and if it's possible buy a coffee for me,it will help me to work, support and keep those Incoming Fixes up to date
Me (Ako Si Ken)
https://m.facebook.com/rkmagno?ref=bookmarks
Big thanks To :
MtkDroidTools
Google
Xda
Samsara @Santosh For .ini Files
My Team https://m.facebook.com/AndroidDevelopmentPortingTeam Please Like Us
Wow.. But i don't know this is for which file and for what??
Like i have note 2 which is pretty messed up. I lost my imei and have problem with efs.
Do u want to say that if i flash this file then i will get imei.?
Bcz i dont think that's possible without z3x box.
Sent from my A0001 using Xparent BlueTapatalk 2
Actually this for all clone Like My|Agua rio , qmobile, wiko Rainbow and fresh .
Sent from my A680 using XDA Free mobile app
Is the imei and nvram permanent?
---------- Post added at 04:39 PM ---------- Previous post was at 04:36 PM ----------
Or i need to apply it again after doing factory reset or flahing a new rom
I already fixed my invalid imei using mauimeta and nvram database file,
I just want to know if the fix you provided is temporary or permanent so the next time i accidentally destroyed my nvram partition, i will be able to flash this to fix it permanently again,
Yes its permanent but if you lose your baseBand it will not fix Imei (only nvram)
Sent from my A680 using XDA Free mobile app
Thank you for your response
kenzukie said:
You're warranty is now void.
Please Read entire Post . . . . . .
Disclaimer . . .
* Remember That flashing Rom can be dangerous to Your Devices .
I take no responsibility for any damages that can happen to your Device.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
*Please do some research if you have any concerns about features inc[/B]included in this ROM
* before flashing it! YOU are choosing to these modifications, and if
* you point the finger at me for messing u make p your device, I will laugh at you
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Fixes tested On Wiko Rainbow - My|Phone Agua rio - Qmobile - For All clones Also For all my Roms
--IMEI And Nvram Fix Installation
*Boot into Recovery
*Find The Imei Fix in A folder
*Wipe Data and Cache (Optional)
*Install And Script Wil all the Things
*Enjoy !
--Requirements
*Custom Recovery
*Busy Box installed
Link : https://drive.google.com/file/d/0B1UbNaWJbFYVV1d0aWNka1dScnc/view?usp=docslist_api
-- Nvram Fix Only
*Boot Into Recovery
*Find The Nvram Fix In a Folder
*Install Done!
-No Requirements Required Just install
Link -
https://drive.google.com/file/d/0B1UbNaWJbFYVekxRWXNBaWk3V3c/view?usp=docslist_api
--Screen Lock Fix Installation
-Boot on to Recovery
*Find Screen Lock Fix To a folder
*Install You're Done
*Enjoy
-Fix For
*Face Unlock
*Voice Unclock
*Pattern
*Pin
*Password
-Requirements
*Custom Recovery
*Busy Box installed
Link - https://drive.google.com/file/d/0B1UbNaWJbFYVS09JSnJNQ3llSGs/view?usp=docslist_api
---3G Fix Installation
*Run mauimeta 3g tool
*From options select connect smartphone in meta mod
*Press reconnect
*Switch off your phone and connect it to usb. the phone will boot up and stuck on bootLogo
*Now select update parameter from the drop down menu,a popup will appear
*click on change nvram database and select the modem File
*click on load from file and select the ini file
*wait for sometime the barcode check box on below will be automatically checked and will display a message load from file completed
*now click on downlaod to flash,after sometime it will show download to flash completed. now close the popup and press disconnect.
*Phone will turn off. then exit the software and power on the device
Links
*MauiMETA3g EXE.
https://onedrive.live.com/?id=8F11D...d=root&authkey=!AL4F8u9jj3tepio&action=locate
*Tinno Driver FoR wiko Rainbow Clones Only.
https://drive.google.com/file/d/0B1UbNaWJbFYVQThmVFI2cnA0RnM/view?usp=docslist_api
*Auto Drivers https://drive.google.com/file/d/0B1UbNaWJbFYVNEo3RU82MG5uaGs/view?usp=docslist_api
*3G Fix Files https://drive.google.com/file/d/0B1UbNaWJbFYVRUFXWXhLWWc4VWs/view?usp=docslist_api
​______________________________________________________________________
It Took Times 3Days and 5hours To collect All Data And write This Thing
I didn't Eat or Drink Water Properly ,I didn't sleep Properly I made This
Just For All of You ,I work Day and night To learn More And more !
_________________________________________________________________
NOTE:
If this Fix Work Do Hit Thanks button and if it's possible buy a coffee for me,it will help me to work, support and keep those Incoming Fixes up to date
Credits :
Me (Ako Si Ken)
https://m.facebook.com/rkmagno?ref=bookmarks
MtkDroidTools
Adpt
Google
Xda
Yoshiko
Samsara @Santosh For .ini Files
My Team https://m.facebook.com/AndroidDevelopmentPortingTeam Please Like Us
Click to expand...
Click to collapse
Yep woking all.. Tested on my canvas fire 2
Hi kenzukie, thanks for all the work and the info, It has been of unmeasurable utility!
The problem I'm having is this: I'm having 3G signal issues on my BLU Studio 5.0C HD. I've already tried NVRAM fix, tried also flashing modem relevant files from a working identical phone (https://mega.nz/#F!gMQS2Lyb), and even tried Maui Meta 3G (images attached).
The problem now is really bothering in LP and has worsten: the band available are no longer the stock bands the phone supported. Is this expected from the official Wiko Rainbow LP Rom? Are there any other variants of the ROM, which include variants of the Baseband, so I can try to apply them with Maui Meta?
As always, thanks for all the hard work, keep it coming!
Link: files I used to apply modem from recovery
lautit said:
Hi kenzukie, thanks for all the work and the info, It has been of unmeasurable utility!
The problem I'm having is this: I'm having 3G signal issues on my BLU Studio 5.0C HD. I've already tried NVRAM fix, tried also flashing modem relevant files from a working identical phone (https://mega.nz/#F!gMQS2Lyb), and even tried Maui Meta 3G (images attached).
The problem now is really bothering in LP and has worsten: the band available are no longer the stock bands the phone supported. Is this expected from the official Wiko Rainbow LP Rom? Are there any other variants of the ROM, which include variants of the Baseband, so I can try to apply them with Maui Meta?
As always, thanks for all the hard work, keep it coming!
Link: files I used to apply modem from recovery
Click to expand...
Click to collapse
i tried 3g fix in official lollipop is working all you need todo is use stock Lp BPLGUinfo*** and update parameter ?
How to fix cid?

[ROM][PORT][ Lollipop 5.0]- [2.1] FunTouch OS 2.1 Beta3- Ulefone Be Touch 2

[[ROM][PORT][ LOLLIPOP 5.0]- [2.1] FUNTOUCH OS 2.1- ULEFONE BE TOUCH 2
​​This is yet another Port by me for Ulefone Be Tocuh 2 , This is ported from Vivo X5 Pro D
*************** Please take a Backup before proceeding ***********************​!!!!DISCLAIMER:Rooting your phone and using custom ROMS have risks, You may brick your Device if instructions not properly followed .I will not be responsible for any brick devices , It is always advisable to make a backup of your phone before proceeding ....Blah blah ......blah !!!!!
KEY FEATURES OF ROM
• Smooth and Good looking
• New UI with new features
• Smooth Touch , Fast . Battery Saver
• Optimization done with L Speed 3.0 ( Credits goes to XDA LSpeed Developers and team @skyinfo @F4uzan @aidasaidas75 @skyinfo @Maltonator @k1ks @slaid480 @ArjunrambZ @pizza_dox @k1ks @Plamb1r @SecDet @Exit_Only @ansebovi- Thanks to their efforts .
• Firmware changed with TCL M2M Phone (excluding Modem)
• Modem Changed to Sony C4 ( no more wifi and connection drop problem)
• Good Camera UI with beauty and other features
• Chinese and English Language only.
• All Bloatware removed
• Antutu Score 45000+
• Music Player and Sound improved
​
Bugs – Error message while connecting phone to laptop /PC with SD storage mounted “ Vivo service stopped . Click ok and Rom works as normal , if you want to go any other mode click ok fast and switch to other USB mode fast .
Not completed – Finger Sensor Support ..I have decoded the code but needs guidance to recompile and infuse help needed from senior developers. If anyone wants to help please PM me.
​INSTRUCTIONS:
1. Download Rom and copy to Sd card
2. Reboot into TWRP Recovery
3. Go to Wipe Option in TWRP
4. Go to Advanced Format option
5. Choose cache ,Data ,System and Dalvik cache partition and swipe for Formatting.
6. Flash ROM = wait until finish
7. First time boot after flashing takes time ..please be Patient
Note :::: Please Do NOT Auto Update .Vivo Will try to push update for its Vivo Phone thinking that it is Vivo X5 Pro .. but It is not ::laugh:​GAPPS INSTRUCTIONS:
Please use only GAPPS given in the thread any other GAPPS will not work due to limitation in the system partition which Mr Ulefone created small size of System Partition .If you encounter Google Play service error after flashing GAPPs Run the APK given .Install Gapps after Flashing the ROM if service error ..Install the Google Service APK​L-Speed Installation:
1. Download L_SPEED_V3.2_OVERSEER_arm and copy to Sd card
2. Reboot into TWRP Recovery
3. Go to Wipe Option in TWRP
4. Go to Advanced Format option
5. Choose cache ,Dalvik cache partition and swipe
You may see the noticible difference after installation the package , Please Convey Thnaks to develpoers who were part of the project for lollipop 5​DOWNLOADS
ROM
https://mega.nz/#!rJglDQbL!WkKMhXDeWa_mu8ZnV0alV23toua-hAksFaaWfHkM5ew
GAPPS
https://mega.nz/#!XBpAzRiS!Ozj59WvF...Bqw4lswfpR6Rsga6xH_pnswIflEgkBfiSIzI[/CENTER]​
awesome
Thanks for a new rom for the device. The rom download is in progress, but the gapps requires a password to decrypt.. Hopefully someone can help assist with the finger print scanner as im sure the rom would be perfect. I enjoy your other ports and thats the only thing lacking in them all. Cheers !:good:
dr3adl0ckd said:
Thanks for a new rom for the device. The rom download is in progress, but the gapps requires a password to decrypt.. Hopefully someone can help assist with the finger print scanner as im sure the rom would be perfect. I enjoy your other ports and thats the only thing lacking in them all. Cheers !:good:
Click to expand...
Click to collapse
Thanks Mate ..links updated again
shanky76 said:
Thanks Mate ..links updated again
Click to expand...
Click to collapse
np. sir You do great work, i barely seen your reply but found the gapps was gonna go and update here and the other site you post too as well as i wasn't sure when you would get back on. I work for a web hosting company using linux servers and what not. Not sure if it would work like this but since its a port, is it possible to use the "working directory" for the finger printer scanner from say maybe the elephone p7000 port rom for the ulefone to your rom's finger print "working directory" since it does indeed work on that rom as it has the same hardware as our device? I tried google searches to see where that information is placed in the rom system directory but could not find anything.
best regards,
dr3adl0ckd said:
np. sir You do great work, i barely seen your reply but found the gapps was gonna go and update here and the other site you post too as well as i wasn't sure when you would get back on. I work for a web hosting company using linux servers and what not. Not sure if it would work like this but since its a port, is it possible to use the "working directory" for the finger printer scanner from say maybe the elephone p7000 port rom for the ulefone to your rom's finger print "working directory" since it does indeed work on that rom as it has the same hardware as our device? I tried google searches to see where that information is placed in the rom system directory but could not find anything.
best regards,
Click to expand...
Click to collapse
There are number of changes required . I can send you the changes if you like ...
boot .img .. decompile make the changes for Finger print sensors.
ETc, Lib , Bin , App these are the places where we need to make changes ... not getting enough time to do all these ..I will try once festive season is over in india
Tutorial with video
I want upgrade vivo x3s , but i cant... give me tutorial with video ... because im newbie.
Thsnks......
Sir i'm new in flashing roms and stuff, i have a 4.4.4 Kitkat phone that doesn't have lolipop update, how do i make this my ROM?
how do we download marshmallow for vivo x5pro? the links that are provided they promted you to fill a survey, but when you click on it says error. havent been able to find a way to download the roms for vivo x5 pro. any help please?
shanky76 said:
[[ROM][PORT][ LOLLIPOP 5.0]- [2.1] FUNTOUCH OS 2.1- ULEFONE BE TOUCH 2
​​This is yet another Port by me for Ulefone Be Tocuh 2 , This is ported from Vivo X5 Pro D
*************** Please take a Backup before proceeding ***********************​!!!!DISCLAIMER:Rooting your phone and using custom ROMS have risks, You may brick your Device if instructions not properly followed .I will not be responsible for any brick devices , It is always advisable to make a backup of your phone before proceeding ....Blah blah ......blah !!!!!
KEY FEATURES OF ROM
• Smooth and Good looking
• New UI with new features
• Smooth Touch , Fast . Battery Saver
• Optimization done with L Speed 3.0 ( Credits goes to XDA LSpeed Developers and team @skyinfo @F4uzan @aidasaidas75 @skyinfo @Maltonator @k1ks @slaid480 @ArjunrambZ @pizza_dox @k1ks @Plamb1r @SecDet @Exit_Only @ansebovi- Thanks to their efforts .
• Firmware changed with TCL M2M Phone (excluding Modem)
• Modem Changed to Sony C4 ( no more wifi and connection drop problem)
• Good Camera UI with beauty and other features
• Chinese and English Language only.
• All Bloatware removed
• Antutu Score 45000+
• Music Player and Sound improved
​
Bugs – Error message while connecting phone to laptop /PC with SD storage mounted “ Vivo service stopped . Click ok and Rom works as normal , if you want to go any other mode click ok fast and switch to other USB mode fast .
Not completed – Finger Sensor Support ..I have decoded the code but needs guidance to recompile and infuse help needed from senior developers. If anyone wants to help please PM me.
​INSTRUCTIONS:
1. Download Rom and copy to Sd card
2. Reboot into TWRP Recovery
3. Go to Wipe Option in TWRP
4. Go to Advanced Format option
5. Choose cache ,Data ,System and Dalvik cache partition and swipe for Formatting.
6. Flash ROM = wait until finish
7. First time boot after flashing takes time ..please be Patient
Note :::: Please Do NOT Auto Update .Vivo Will try to push update for its Vivo Phone thinking that it is Vivo X5 Pro .. but It is not ::laugh:​GAPPS INSTRUCTIONS:
Please use only GAPPS given in the thread any other GAPPS will not work due to limitation in the system partition which Mr Ulefone created small size of System Partition .If you encounter Google Play service error after flashing GAPPs Run the APK given .Install Gapps after Flashing the ROM if service error ..Install the Google Service APK​L-Speed Installation:
1. Download L_SPEED_V3.2_OVERSEER_arm and copy to Sd card
2. Reboot into TWRP Recovery
3. Go to Wipe Option in TWRP
4. Go to Advanced Format option
5. Choose cache ,Dalvik cache partition and swipe
You may see the noticible difference after installation the package , Please Convey Thnaks to develpoers who were part of the project for lollipop 5​DOWNLOADS
ROM
https://mega.nz/#!rJglDQbL!WkKMhXDeWa_mu8ZnV0alV23toua-hAksFaaWfHkM5ew
GAPPS
https://mega.nz/#!XBpAzRiS!Ozj59WvF... someone port this Funtouch OS to HTC one m7?​
Click to expand...
Click to collapse
Can I install this on my vivo y28 ?
My phone SM-J110h How support ViVO rom
kernel version ??

HavocOS How to install SM-J8

/*
* Your warranty is no longer valid.(or it isn't ? who am I to judge)
*
* I am not responsible for bricked devices, dead SD cards, broken touchscreens,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this package
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
HavocOS How to install SM-J8 ~vks
DISCLAIMAR: It is a gsi and not a ROM. I am not responsible for anything ,
proceed at your own risk , All files are properties of their respective owner.
What works (TESTED ON SM-J810G)
-Calls , SMS
-Data (Enable LTE in data setting , default edge)
-Fingerprint
-Both Camera and Flash
-Audio
-Screen Mirroring
-Face-unlock
-Basically everything
What dosen't work
-No bugs , Everything works , stable too.
IMPORTANT:You will need an android10 stock vendor.
DON'T TOUCH VENDOR
The incuded .zip contains
-Odin3
-Odin Flashable TWRP , By @goldfish07 (Telegram grpoup = https://t.me/galaxyj8 )
-Open-gapps-pico-arm-10.zip (Propietary)
[ https://opengapps.org/ ]
-HavocOS.img (Non compressed/zipped iso)
[ https://sourceforge.net/projects/havoc-os/files/a64-ab/ ]
Unzip the container file , and copy all these to sd card or an otg pendrive(recomended)
, PC MTP Dosent work in recovery.
Procedure.
1. Flash TWRP with ODIN (Lookup for procedure , and install drivers)
2. Boot into Custom Recovery
3. Wipe > Format_Data > Type yes (Swipe to reset dosen't work, data backup-
-would be a good idea)
4.Navigate to your copied files , select Flash image > HavocOS.img , Flash in system.
5.Go to wipe (after flash), Advanced wipe > System > Repair or change File System >-
-Resize File System (This Prevents Error70 Insufficient Space in Gapps)
6.Flash Gapps (select Flah from Zip) , If flash shows Error70 , Repeat From Step 3.
7.Reboot and enjoy
Fixed:
1.Gapps Flash Error70 No space
Note:
To fix the glitchy lockscreen wallpaper just put another image ,
and it will be just fine
And this OS Supports Bootanimation change.
To get Magisk use the in-built magisk manager
(Others just bootloop)
@vanshksingh
https://t.me/galaxyj8

AOSP-11 How to install SM-J8

/*
* Your warranty is no longer valid.(or it isn't ? who am I to judge)
*
* I am not responsible for bricked devices, dead SD cards, broken touchscreens,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this package
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
Full-AOSP11.img or Go-AOSP.img How to install SM-J8 ~vks
DISCLAIMAR: It is a gsi and not a ROM. I am not responsible for anything ,
proceed at your own risk , All files are properties of their respective owner.
Full-AOSP11.img
It is just flashed with playstore and can use any app
Go-AOSP11.img
It is pre-flashed with Go-apps , and cannot install
Google-full nor the assistant
What works (TESTED ON SM-J810G)
-Calls , SMS
-Data (Enable LTE in data setting , default edge)
-Fingerprint
-Both Camera and Flash
-Audio
-Screen Mirroring
-Basically everything
What dosen't work
-No bugs , Everything works , stable too.
IMPORTANT:You will need an android10 stock vendor.
The incuded .zip contains
-Odin3
-Odin Flashable TWRP , By @goldfish07 (Telegram grpoup = https://t.me/galaxyj8 )
-Nik-gapps-pico-arm64-11.zip (Propietary)(yes it is arm64 , and yes it is not gapps)
[Not there in Go-edition]
-Full-AOSP11.img or Go-AOSP.img (Non compressed/zipped iso)[what you chose]
-Device-ID.apk
Unzip the container file , and copy all these to sd card or an otg pendrive(recomended)
, PC MTP Dosent work in recovery.
Procedure.
1. Flash TWRP with ODIN (Lookup for procedure , and install drivers)
2. Boot into Custom Recovery
3. Wipe > Format_Data > Type yes (Swipe to reset dosen't work, data backup-
-would be a good idea)
4.Navigate to your copied files , select Flash image > V, Flash in system.
[Skip steps 5-6 for Go-edition]
5.Go to wipe (after flash), Advanced wipe > System > Repair or change File System >-
-Resize File System (This Prevents Error70 Insufficient Space in Gapps)
6.Flash NikGapps (select Flah from Zip) , If flash shows Error70 , Repeat From Step 3.
7.Reboot Enjoy
IMPORTANT:-
How to Fix the “Device is not Certified by Google” Error
[Your device will still say it is uncertified in the Google Play Store settings.
This is normal. All this fix does is white-list your uncertified device so you
can still use Google apps and services.]
Steps.
Install the Device+ID.apk (Included)
Open the app , Tap the Google Service Framework (GSF)
Copy it
Go to this website-
Sign in - Google Accounts
Sign-in
Paste/Copy GSF code in the box
Complete captcha (sorry dosen't work for robots)
Register (The box goes red , it's totally fine)
Reboot
After a few mins you should be able to sign in
(Don't worry , it will keep saying that not certified but after
a while it will let you sign in, and turn off notification for play
protect to remove annoying notification)
For more info-
How to Fix the "Device is not Certified by Google" Error
Are you having trouble with signing in to your Google account? Can't access the Google Play Store or use Google apps like Gmail, Maps, Play Music, or Photos? Seeing a "device is not certified by Google" error? Here's how to fix that.
www.xda-developers.com
Fixed:
1.Gapps Flash Error70 No space
2.Device Is not certified error
Notice:
1.Maps keep closing , Though maps-go , waze work fine.(Probably a google issue)
2.Bootanimation cannot be changed (Though if you find the folder you can)
3.Stock-Camera saves photos sideways , use Googlecamera.apk or any other to fix issue.
4.Play Services can be broken
5.Check for new releases on source
@vanshksingh
use latest nikgapps from https://sourceforge.net/projects/nikgapps/files/Releases/NikGapps-R/
to resolve play services bug , and / or other bugs
SAMSUNG J8/On8 OFFICIAL
Da Rules : 1. English and Hindi Only 2. Offtopic = a lil bit. 3. ETA = allowed 4. Respect All Admins 5. Reviewers always allowed.
t.me
Is will work on Samsung J810Y/DS?

Categories

Resources