Hi
I have an ecosport which has ford sync1 2017 plate, i installed an android head unit to replace the okd radio however when i press the voice button on steering wheel and say call wife it calls her she says hi but she cannot hear me but if i say hey google and call her tgrough google on the head unit bluetooth she can hear me and i can hear her so why can i call and recieve calls through sync but the other person cannot hear me i do have a mic too
Related
I'm sure you've heard of this issue before but I was unable to find a fix!
I have been using VC1.6 through strictly the device mic / speaker and it has worked great except for some reason it does not announce incoming calls.
Currently using ATT TILT with WM6
Using 520 Plantronics BT Headset
I downloaded "Bluetooth Voice Command Configuration" from XCSdM but it doesn't seem to do anything to help!
When I press the talk/end button on the Headset it enables the bluetooth static but it does not give the VC prompt.
I'd also like it to be able to announce incoming calls through the bluetooth!
Anyone?!
Well, I got the incoming calls to announce!!! Now all I need to do is find out how to get the VC1.6 and my bluetooth synced so that when I press my bluetooth headset button it activates the VC...
Please? LOL
Does your bluetooth headset support the handsfree profile? Not all headsets support the handsfree profile (even if you can use it to pick up and answer calls). I've got VC 1.6 and voice command working just fine with my Tilt and Jabra 8010.
edit: seems your plantronics does support the HFP. Did you ensure you "checked" the box for Hands Free Service when you paired it?
Yes, it's completely paired and the handsfree is checked :-\
I'm stumped. I get incoming call notifications, I get announcement reminders, etc.... but when I push the button on the headset it tries to initiate (or answer) a call.... If I hold it down, it powers off the headset. If I double click it, it calls the last person I talked to.
Maybe I just don't know how to function my headset to get it to prompt for VC?
I followed the "RandyRants" Tip to get everything working and it did activate the announcement of incoming calls, etc... just can't make commands yet.
I'm also using the BT VC Config enabled @ 30 duration.
I'm 1/2 way there!! Now I just need to cross the finish line...
Here's the link yo RandyRants that I followed: http://www.randyrants.com/2007/05/wm6_tip_voice_c.html
Any advice?
didn't really see a thread....mod's if this needs to be moved, please do so.
I've noticed a quark in the way the Bt audio gateway works on my fuze.
Does NOT matter which headset I use, but, 99% of the time, if someone
calls me, I hear the phone ring, activate the BT, they can hear me, but I
cannot hear them. If I shut the headset off, turn it back on and let it
connect, I can hear them & they can hear me. This ONLY happens on incoming
phone calls. On outgoing, everything works.
When connected, if you look at the BT icon, it shows the BT icon, with what
looks like a STEREO headset. If you click on it, it says connected to a STEREO
headset, which my JB2 or any other BT is not.
Is it possible that the fuse is using the mic, but the sound is being directed to
a non existent "stereo" headset, which would be the other ear?
Happy Thanksgiving! Everyone have a nice Triptophan (sp) nap?
Do you have MSVC set to announce incoming calls? If you do and you answer via the headset, you can't hear the caller. Disable announce incoming and it'll work just fine.
It's a known bug and we need to complain about it (and the rest, like the left/right dpad) to AT&T and HTC.
MSVC set to handle BT, announce incoming.
When I hit the button on the headset, the incoming ring/announcement stops,
the phone says it is connected, and the caller can hear me, but I cannot hear them.
I was wondering if anyone using a NON stereo BT headset, when you are connected, it says if you click on the BT icon, "stereo headset".
Just in case you missed it - you can't have MSVC announce incoming calls OR IT WILL MUTE THE CALLER.
Turn the announce off and it'll be fine until MS/HTC/ATT fix their stinking problem...
oh and don't forget to complain...
Oh, I have complained....never had that problem with the tilt.
I guess I'll go back to just having unique ringtones for everyone, so I can tell
who's calling...until MS fixing the #%@#^ problem. Thanks for the
clarification. This was driving me nuts! They could hear me, but I couldn't
hear anyone.
pkley said:
Just in case you missed it - you can't have MSVC announce incoming calls OR IT WILL MUTE THE CALLER.
Turn the announce off and it'll be fine until MS/HTC/ATT fix their stinking problem...
oh and don't forget to complain...
Click to expand...
Click to collapse
Hi everyone,
I use headset to listen to songs during traveling (which most people do ). However when I receive a call and if I unplug the headset while on a call, the phone enters loud speaker mode instead of earpiece. I have to activate and deactivate the speaker on phone twice to handle the issue. Can anyone guide me to a solution that when I unplug the headset while on a call it goes to earpiece instead of loud speaker? I use Moto G and OS is Kitkat 4.4.3. Headsets used : various
Thanks and regards,
Hemanth Kaja.
My apologies if this has been asked and answered....I can't image it hasn't but I did search and didn't see anything exactly like this.
I have a bluetooth headset connected to my watch. when I get a call, the watch shows an incoming call, my bluetooth headset announces the call, when I answer the call, on the watch, the call goes to the watch speaker, not the headset. After I answer the call I have to tap on the watch to move the call to the headset.
Anyone know why? and how to make it go directly to the headset on answer?
Thanks,
Matt
Have you tried answering with the headset instead? Maybe check the Bluetooth settings as well to make sure the headset is set as the default (if possible)
sudermatt said:
My apologies if this has been asked and answered....I can't image it hasn't but I did search and didn't see anything exactly like this.
I have a bluetooth headset connected to my watch. when I get a call, the watch shows an incoming call, my bluetooth headset announces the call, when I answer the call, on the watch, the call goes to the watch speaker, not the headset. After I answer the call I have to tap on the watch to move the call to the headset.
Anyone know why? and how to make it go directly to the headset on answer?
Thanks,
Matt
Click to expand...
Click to collapse
Do you have phone audio option in Bluetooth settings on the watch? Or only media audio?
Hi, I just bought e nord 2 (but the question is applicable to any phone I think). I had a P20, and when connected to my car, (nissan qashqai J11) I was able to use steering wheel command to call up android assistant on phone, and it answer either if the infotainment device wasn't in aux/bluetooth mode. Now with the oneplus, it only works when in bluetooth input, or better, I can hear assistant voice only in that mode and putting the volume very high.
I think the difference between the two devices is that P20 send assistant output to the car as it was an incoming call, while op send it as a music stream or something so.
Here the question: is there some settings or some app that let me to send the assistant audio as a voice call over bluetooth?
Thanks!