Related
Hi all,
Last weekend I rooted my phone. I treble-ized it and tampered with a few GSIs. I finally chose to use PHHs Treble 9 GSI.
When I connected my phone to my car's Bluetooth I could call, but there was no sound. Is this a driver issue on my Vendor partition (ie did I use the wrong Vendor), or is this a general problem with GSI?
roytje88 said:
Hi all,
Last weekend I rooted my phone. I treble-ized it and tampered with a few GSIs. I finally chose to use PHHs Treble 9 GSI.
When I connected my phone to my car's Bluetooth I could call, but there was no sound. Is this a driver issue on my Vendor partition (ie did I use the wrong Vendor), or is this a general problem with GSI?
Click to expand...
Click to collapse
it wouldnt be a dirver since android doesnt use drivers, it would be in the bluetooth stack. likely caused by a failed flash of your ROM especially if other users arent having the same issue. What kind of car is it (assuming the deck is stock to the car)
Youdoofus said:
it wouldnt be a dirver since android doesnt use drivers, it would be in the bluetooth stack. likely caused by a failed flash of your ROM especially if other users arent having the same issue. What kind of car is it (assuming the deck is stock to the car)
Click to expand...
Click to collapse
Good to know it's only a problem what's occurring on my phone. That would mean flashing a different rom could solve the issue.
The car is a Punto EVO. I haven't tried any other Bluetooth devices, but I expect the same result.
I'll flash a new rom and report back. Thanks for replying.
roytje88 said:
Good to know it's only a problem what's occurring on my phone. That would mean flashing a different rom could solve the issue.
The car is a Punto EVO. I haven't tried any other Bluetooth devices, but I expect the same result.
I'll flash a new rom and report back. Thanks for replying.
Click to expand...
Click to collapse
yeah, reflash the same ROM or try a different one. Back in the day, there were tons of issues with stuff that was designed to work on the phone based on specific kernel programming that spoke to the hardware to allow these features to physically operate, but only in touchwiz based ROMs, AOSP based ROMs were left out in the cold. With the emergence of the necessity of a clean knox in order for certain things to work, i have given up on root for the time being so that i can enjoy the awesomeness that is paying for stuff with my watch (which requires an unrooted phone to work. Technically your phone can be rooted but it makes it a pain in the anus)
anyways, i think your audio issue might be a GSI specific thing, just a hunch tho. Might want to go look in the GSI threads and see if there is a list of what works/whats broke in the ROMs. They usually just come out and tell you if ti doesnt work because if its the other way around, the devs reputation will be tarnished
I flashed Lineage OS 16 (Android 9) GSI. Same problem. Also with other Bluetooth devices. I'm thinking it's the vendor I flashed. I did find an Oreo vendor for this device mentioning Bluetooth calls don't work.
Searched for a rom without Treble but couldn't find one that has December security (or November). For now I'll use my earbuds when calling from the car.
I could flash a number of images, but don't really want to the time of finding the perfect rom for my devices has passed. I'll just keep this rom and when I feel like it, I'll flash the stock rom.
Thanks anyways for the advice!
I was bored looks like we have a version out there but i havent tried it yet it has step by step pretty much but you will have to unroot go back to latest stock i think first then flash if anyone checks it out lemme know
https://www.getdroidtips.com/android-10-moto-g7-power/
the github is here https://github.com/phhusson/treble_experimentations/releases/tag/v210
AOSP 10.0 v210
Dev is phhusson <<-----all credit would be to this gentleman i just happened across it while i was surfing, and saw 10 was out for the plus.
toxinburn said:
the github is here https://github.com/phhusson/treble_experimentations/releases/tag/v210
AOSP 10.0 v210
Dev is phhusson <<-----all credit would be to this gentleman i just happened across it while i was surfing, and saw 10 was out for the plus.
Click to expand...
Click to collapse
I tried the android 10 system image on my moto g7 power. I tried wiping system and installing the system image in twrp.
Phone kept bootlooping. Ended up trying to restore my backup via twrp but data would not restore,and I ended up in a twrp bootloop. Eventually I somehow hardbricked the device. Luckily I was able to find a blankflash to restore the phone to fastboot and I used rsdlite to reflash fw. Maybe I should have wiped everything, not just sytem, but I'm not willing to risk trying again.
skalnas said:
I tried the android 10 system image on my moto g7 power. I tried wiping system and installing the system image in twrp.
Phone kept bootlooping. Ended up trying to restore my backup via twrp but data would not restore,and I ended up in a twrp bootloop. Eventually I somehow hardbricked the device. Luckily I was able to find a blankflash to restore the phone to fastboot and I used rsdlite to reflash fw. Maybe I should have wiped everything, not just sytem, but I'm not willing to risk trying again.
Click to expand...
Click to collapse
Same to me with the difference I wiped all. But I don't pretend to be a guru of the phone's firmwares so it might be I did it wrong.
Maybe it's not a good section for this thread, it's more like Q&A.
It's possible to flash Android 10 GSI, but it wasn't ready for a daily driver.
What was working:
-booting
-screen
-audio
-connecting to 4G network
what wasn't:
-connecting to wifi
-receiving SMS on 4G network
I did not test rest of it.
Just wait a little while longer. The official stock upgrade will be released and Android 10 custom ROMs will be developed.
robson_89 said:
Maybe it's not a good section for this thread, it's more like Q&A.
It's possible to flash Android 10 GSI, but it wasn't ready for a daily driver.
What was working:
-booting
-screen
-audio
-connecting to 4G network
what wasn't:
-connecting to wifi
-receiving SMS on 4G network
I did not test rest of it.
Click to expand...
Click to collapse
ut
Here are some notes about Android 10 gsi and Moto G7 power from the main developer. I believe there's a flashable wifi zip PHH made as a fix for the wifi somewhere on this page: https://github.com/phhusson/treble_experimentations/wiki/Moto-G7-Power
Yes, I've seen it.
I don't have telegram account nor do I wish to create any, so WiFi patch is not for me.
Besides, it's only applicable when your WiFi works with static IP but not with dhcp.
Mine wasn't working at all.
As the title says, here's a list of some GSI's i have tested so far... but first for some story.
Bought the phone in summer, it's quite nice but has its own issues like no kernel source BUT since we can unlock the device and actually play around, oh boy it has been fun.
On the course of few hours and many downloads later I have a small list of GSI's that worked!
Every GSI I have mentioned REQUIRE device specific patch(es)!!!
For that you have to root.
----------------------WORKING GSI's-------------------------
BlissROM - It boots and functions quite fast
Cons: no included Gapps
Flashing any system editing patch results in "Phone is booting" homescreen.
https://sourceforge.net/projects/treblerom/files/BLESS/2020.09.21/
3.5 jack, VoLTE, Bluetooth, ComboFix patches are required, flash with Magisk manager
DO NOT USE FixLagSmooth
HavocOS 3.7 and 3.6 - Work and can be daily driven
3.6 requires FixLagSmooth patch
MUST root and apply all linked patches (don't use FixLagSmooth on 3.7, you can but no need)
https://forum.xda-developers.com/mi...rom-how-to-install-android-10-gsi-mi-t4126223
AOSP Android 10 based - Also does work and requires patching
https://forum.xda-developers.com/mi...rom-how-to-install-android-10-gsi-mi-t4126223
HydrogenOS Android 10 - Works
Has few bugs
No Google services
https://mirrors.lolinet.com/firmware/gsi/HydrogenOS/
----------------------COMMUNITY REPORTED GSI's-------------------------
Android 11 GSI - Reported to be functional by HumptyPotato47, thanks mate!
No Gapps as of now NikGapps exist for Android 11, search XDA for it!
Requires more testing...
https://github.com/phhusson/treble_experimentations/releases/tag/v300.f
----------------------MAYBE WORKING GSI's-------------------------
OxygenOS 10 GSI - Seems to work.. sorta
First boot after exiting fastboot causes the phone to reboot
Second boot will loop
https://mirrors.lolinet.com/firmware/gsi/OxygenOS/
----------------------NON FUNCTIONAL GSI's-------------------------
You tell me
...I did find a very nice list of GSI ROMs to try out more, here's the link:
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
----------------------FLASHING GSI-------------------------
If you test one then don't hesitate with replying which one, about the experience, bugs and how you installed it.
My method of installing was this:
1. Make sure to have the new adb commandline that supports fastbootd mode
2. Drop the GSI .img file in /adb directory for ease
3. Make sure you're running MIUI with unlocked bootloader and USB debugging enabled
3.5 MAKE SURE you get a GSI ROM with Gapps as existing TWRP isn't fully functional
4. GSI you should have must be AB partition!!!
Once all set then follow the next commands
>adb reboot bootloader
>fastboot -w
>fastboot reboot fastboot
>fastboot erase system
>fastboot flash system "GSI-ROM-name-without-quotes".img
>fastboot reboot bootloader
>fastboot reboot
----------------------SETTING UP GSI-------------------------
Once all that is complete it should boot, if not then that specific GSI does not work.
Also a thing worth mentioning! Whenever I boot this phone to fastbootd Windows keeps forgetting what driver it was which requires
few extra clicks in device manager to set it up for fastbootd use. Including an image with simple to follow instructions if you have the same issue.
>fastboot boot twrp.img
Once in TWRP you should be able to access internal storage with your computer, drag Magisk.zip over and flash. Don't forget to wipe cache!
If it boots normally then root was successful, now apply the linked patch and reboot once again. Since we are playing with GSI:
Head to Settings
Find Phh Treble Settings
Misc features
Check Disable audio effect. -- DISABLE IT AFTER PATCHING!!!
IMPORTANT!!! I only tested Havoc and Bliss for a long period, IF one of my mentioned GSI's or others require more patches then I have linked headphone jack and Bluetooth audio patches too.
Combo fix should do the trick thought so your mileage may vary.
----------------------HELP US-------------------------
IF you find more working GSI's then tell us and I will make sure to add them to the main post so it won't get clogged under other comments!
Update on 05.10.2020 GMT+3
Bliss ROM GSI
As only a day or two have passed I already encountered few issues.
> You cannot remove screenshot sounds, even when fully muted
> Data drain is something interesting I've noticed, consumption compared to MIUI is higher.
> When using the gesture navigation it is a bit buggy when using quick side swipe for multitasking.
Positive notes!
> It is stupid fast
> Battery life is good
> GCam is amazing
> 99% of the customization options work perfectly
> Fast charging modes and such work perfectly
Neutral stuff...
> No FOD, thanks for closed source
> whenever you take a picture or a screenshot and have Blutetooth audio connected, it pauses and plays out loud via speaker. No music leaks out
this phone is born dead, no developer cares about it.
alsartawi said:
this phone is born dead, no developer cares about it.
Click to expand...
Click to collapse
Sad truth but won't stop others from working on it. Eventually we might get a kernel source
Kevin Soosaar said:
Sad truth but won't stop others from working on it. Eventually we might get a kernel source
Click to expand...
Click to collapse
i would pay to see a stable custom rom for this phone, i really loved it.
alsartawi said:
i would pay to see a stable custom rom for this phone, I really loved it.
Click to expand...
Click to collapse
Havoc OS and Bliss ROM are both quite stable, albeit with Bliss you don't get Gapps which is a huge bummer to most users.
Personally I just installed MicroG services and use Aurora store with anonymous "account".
When I tried to flash Gapps with TWRP I ended up soft bricking ROM so it was required to restore stock and try again. Of course there's no need if you can still use fastbootd.
Kevin Soosaar said:
Havoc OS and Bliss ROM are both quite stable, albeit with Bliss you don't get Gapps which is a huge bummer to most users.
Personally I just installed MicroG services and use Aurora store with anonymous "account".
When I tried to flash Gapps with TWRP I ended up soft bricking ROM so it was required to restore stock and try again. Of course there's no need if you can still use fastbootd.
Click to expand...
Click to collapse
does FOD works on Havoc OS?
edit: sorry i just read that it's not working.
alsartawi said:
does FOD works on Havoc OS?
Click to expand...
Click to collapse
FOD is not working as the driver sources are not public, reverse engineering is not possible too afaik. Everything else works.
Should i send this phone back to Amazon?
Seriously, last night i bought it, thinking about to install some custom rom, but if there are no developers caring of it, i might returb the phone to the seller...
IMO MIUI EU is better then GSI roms. Everything works. Got rid of most chinese crap. You can use Magisk.
Have nice features (MIUI in general). The only thing i dont like -mine turns on WIFI byitself dotn know how it happens... but it happens when i sleep. china collecting logs?
https://www.scmp.com/abacus/tech/ar...earch-and-browsing-data-china-researcher-says
afigienas said:
IMO MIUI EU is better then GSI roms. Everything works. Got rid of most chinese crap. You can use Magisk.
Have nice features (MIUI in general). The only thing i dont like -mine turns on WIFI byitself dotn know how it happens... but it happens when i sleep. china collecting logs?
https://www.scmp.com/abacus/tech/ar...earch-and-browsing-data-china-researcher-says
Click to expand...
Click to collapse
Literally the main reason I made this post is to help others who are interested to use GSI ROM's on their devices. I do agree that MIUI has some decent features and I did use Xiaomu.eu before but it was so buggy. In the end I love customizing the device however I like it so MIUI is just not for me. Either way I might try to negotiate with Amazon to get a refund as touch and Bluetooth problems still persist. Fun fact, on Bliss the edge detection is pretty good and not as aggressive or straight out bad.
Simon_19 said:
Seriously, last night i bought it, thinking about to install some custom rom, but if there are no developers caring of it, i might returb the phone to the seller...
Click to expand...
Click to collapse
Actually there are plenty of people ready to build ROMs for Toco (Mi Note 10 Lite) and Tucana (Mi Note 10) but there just isn't any kernel source available. Making things worse is the cancelled release of Toco in India and we know that they are one of the biggest Android ROM builders next to Russians. No one there is gonna import a device like this because better phones for money exist. If you don't like it then yeah I recommend returning otherwise give GSI a try for now and see what happens.
You won't lose warranty as there is no E-fuse like on Samsung phones so locking bootloader and flashing back to stock is enough.
Is anyone try oos gsi ?
HumptyPotato47 said:
Android 11 GSI of phh is working fine. It is very smooth. But i switched back to miui because i can't find any android 11 gapps.
Click to expand...
Click to collapse
can you give the link of the rom?
HumptyPotato47 said:
Android 11 GSI of phh is working fine. It is very smooth. But i switched back to miui because i can't find any android 11 gapps.
Click to expand...
Click to collapse
Hi, there are gapps for Android 11, look for NikGapps here in XDA
Kevin Soosaar said:
Actually there are plenty of people ready to build ROMs for Toco (Mi Note 10 Lite) and Tucana (Mi Note 10) but there just isn't any kernel source available. Making things worse is the cancelled release of Toco in India and we know that they are one of the biggest Android ROM builders next to Russians. No one there is gonna import a device like this because better phones for money exist. If you don't like it then yeah I recommend returning otherwise give GSI a try for now and see what happens.
You won't lose warranty as there is no E-fuse like on Samsung phones so locking bootloader and flashing back to stock is enough.
Click to expand...
Click to collapse
who said its cancelled?
Dr. DoubtReaper said:
who said its cancelled?
Click to expand...
Click to collapse
The mentioned Mi Note 10 Lite for India was supposed to be called Mi 10i or something like that. It quickly disappeared and is not happening.
Of course I might be wrong by this date but looking for now there is no 10i, only speculation videos and threads.
Mi Note 10 Lite for India would've been code named "tocoin", same hardware and everything else so just a rebadge in old Xiaomi fashion... :laugh:
anyone tried new version of blissROM? feedback?
GaryFisher88 said:
anyone tried new version of blissROM? feedback?
Click to expand...
Click to collapse
Not sure if the one I linked is up do date, give it a try yourself as my device went in for warranty repairs.
Hello, I am currently using Xiaomi.eu based on MIUI 12 and I would like to know how to flash HAVOC OS GSI. Should I flash back to Global Rom then flash the GSI as indicated? Answer is greatly appreciated.
long story short im trying to flash a GSI on my infinix zero 8. It has a dynamic super partition. Ive heard people mention that you need to boot fastboot to get into fastbootd mode, which works. but it doesnt let me do anything in fastbootd. my pc doesnt recognise my phone in fastbootd and only in fastbootd mode. how could i go about solving this?
kusti420 said:
long story short im trying to flash a GSI on my infinix zero 8. It has a dynamic super partition. Ive heard people mention that you need to boot fastboot to get into fastbootd mode, which works. but it doesnt let me do anything in fastbootd. my pc doesnt recognise my phone in fastbootd and only in fastbootd mode. how could i go about solving this?
Click to expand...
Click to collapse
Are your drivers installed?
fastbootd is the counterpart - located on Android device - of fastboot tool installed on computer. A fastbootd mode doesn't exist: only fastboot mode ( AKA bootloader or download ).
Tab E said:
Are your drivers installed?
Click to expand...
Click to collapse
yes obviously, literally everything else works be it MTP, fastboot, adb, edl or whatever, only in fastbootd is it not recognised
Tab E said:
Are your drivers installed?
Click to expand...
Click to collapse
and im also running platform tools 31.0.0 not some outdated version
kusti420 said:
and im also running platform tools 31.0.0 not some outdated version
Click to expand...
Click to collapse
as your using a mediatek phone, try using sp flash tool and format the preloader and reinstall that
It's a litte risky, so be careful. I've had the same issue on my mt6795 and restoring the preloader fixed it.
Tab E said:
Are your drivers installed?
Click to expand...
Click to collapse
nvm reinstalling drivers fixed it
kusti420 said:
long story short im trying to flash a GSI on my infinix zero 8. It has a dynamic super partition. Ive heard people mention that you need to boot fastboot to get into fastbootd mode, which works. but it doesnt let me do anything in fastbootd. my pc doesnt recognise my phone in fastbootd and only in fastbootd mode. how could i go about solving this?
Click to expand...
Click to collapse
have you successfully installed a GSI image on infinix zero 8? If so, what is the rom? I intend to install a GSI on mine too, if possible one already based on android 11...
lrdslr said:
have you successfully installed a GSI image on infinix zero 8? If so, what is the rom? I intend to install a GSI on mine too, if possible one already based on android 11..
Click to expand...
Click to collapse
yes i sucessfully installed many GSIs on it, such as bless, caos, crrom, dot os, havoc, lineage and a few others idk about android 11 but im running resurrection remix 8.6.4 rn, there are a few problems with gsis ive noticed, they cant be rooted by just patching magisk on the boot.img, also on some GSIs even on that RR build ADB isnt working and worst of all, i have no clue why but i cant use wired headphones with these GSIs, the audio just wont go through the cable.
i mean you can experiment with different roms. but pls let me know if youre experiencing the same problem where you cant use wired headphones, thats a huge bummer for me as i just bought a new pair of earphones to use with this phone just to find out i cant use them xd
lrdslr said:
have you successfully installed a GSI image on infinix zero 8? If so, what is the rom? I intend to install a GSI on mine too, if possible one already based on android 11...
Click to expand...
Click to collapse
also idk if you noticed i also made a post about how i flashed a gsi on it, in case youre interested
kusti420 said:
yes i sucessfully installed many GSIs on it, such as bless, caos, crrom, dot os, havoc, lineage and a few others idk about android 11 but im running resurrection remix 8.6.4 rn, there are a few problems with gsis ive noticed, they cant be rooted by just patching magisk on the boot.img, also on some GSIs even on that RR build ADB isnt working and worst of all, i have no clue why but i cant use wired headphones with these GSIs, the audio just wont go through the cable.
i mean you can experiment with different roms. but pls let me know if youre experiencing the same problem where you cant use wired headphones, thats a huge bummer for me as i just bought a new pair of earphones to use with this phone just to find out i cant use them xd
Click to expand...
Click to collapse
not able to root through magisk is a big problem for me, as I use many bank apps... But this problem still affects many devices running GSI images, not just infinix zero 8. if the wired headphones really don't work, it's another big problem... the rest work well? gps, cameras, wifi, bt, sim card, volte, sensors, etc?
I haven't received my zero8 yet, but I think it won't be long. I found your post about flash of GSI images on devices with dynamic partition (super), when arrive I will do the test and notice...
lrdslr said:
not able to root through magisk is a big problem for me, as I use many bank apps... But this problem still affects many devices running GSI images, not just infinix zero 8. if the wired headphones really don't work, it's another big problem... the rest work well? gps, cameras, wifi, bt, sim card, volte, sensors, etc?
Click to expand...
Click to collapse
yes, i havent seen any problems with the rest of these sensors and stuff, and even the bank apps work unlike back in the days where if you had a custom rom you couldnt use mobile-id. using wireless internet on gsi works even better than stock rom (xos), atleast for me, cause in xos it didnt choose the correct settings for setting up a 4g connection by default, but it worked perfectly on GSI, just pop in a sim card and off you go, at least thats how my experience was with it.
kusti420 said:
yes, i havent seen any problems with the rest of these sensors and stuff, and even the bank apps work unlike back in the days where if you had a custom rom you couldnt use mobile-id. using wireless internet on gsi works even better than stock rom (xos), atleast for me, cause in xos it didnt choose the correct settings for setting up a 4g connection by default, but it worked perfectly on GSI, just pop in a sim card and off you go, at least thats how my experience was with it.
Click to expand...
Click to collapse
Normal magisk won't work on GSI based on PHH
Magisk-v20.4-phh-aonly.zip | by younes_bfd for Galaxy J6
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Use this magisk
Tab E said:
Normal magisk won't work on GSI based on PHH
Magisk-v20.4-phh-aonly.zip | by younes_bfd for Galaxy J6
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Use this magisk
Click to expand...
Click to collapse
we know, but there isnt twrp for infinix zero 8 or any other custom rom to my knowledge, so there is no way of flashing it, doesnt work through adb sideload or fastboot
lrdslr said:
not able to root through magisk is a big problem for me, as I use many bank apps... But this problem still affects many devices running GSI images, not just infinix zero 8. if the wired headphones really don't work, it's another big problem... the rest work well? gps, cameras, wifi, bt, sim card, volte, sensors, etc?
I haven't received my zero8 yet, but I think it won't be long. I found your post about flash of GSI images on devices with dynamic partition (super), when arrive I will do the test and notice...
Click to expand...
Click to collapse
[AOSP 10.0] [Qualcomm] Q vendor: no analog audio output (passive usb-c, or 3.5mm jack) · Issue #855 · phhusson/treble_experimentations
When plugging in usb-c, this error appears: E/APM::HwModule(1123): createDevice: could not find HW module for device 0004 address After initial investigation, Q vendor's audio policy (attached) doe...
github.com
Google Issue Tracker
issuetracker.google.com
it seems to me like im not the only one with that issue
lrdslr said:
not able to root through magisk is a big problem for me, as I use many bank apps... But this problem still affects many devices running GSI images, not just infinix zero 8. if the wired headphones really don't work, it's another big problem... the rest work well? gps, cameras, wifi, bt, sim card, volte, sensors, etc?
I haven't received my zero8 yet, but I think it won't be long. I found your post about flash of GSI images on devices with dynamic partition (super), when arrive I will do the test and notice...
Click to expand...
Click to collapse
solved the adb problem by flashing this:
[ROM] [Treble] Ressurection Remix 8.6.7 Android Q
Welcome to Ressurection Remix Android Q 10.0 For Galaxy A30 [ROM] [Treble] RROS Android 10 Q Samsung Vendor Compatible Quote: Warning : Me nor XDA Are responsible for any damage that might be caused after...
forum.xda-developers.com
edit:
nvm dont install it sim doesnt work for me on this
Hi everyone,
This is driving me mad. I've been trying to install a bunch of different ROMS on my Samsung Galaxy A10 and while it seemingly installs just fine, when I press "reboot system" it gets into a perpetular loop. Am I doing something wrong here?
Bliss OS Rom v14 w/ Android 11 for Samsung A10 Arm64 ( Stable Unofficial ) released 2021
IMO you should contact developers of Bliss OS to get your issue fixed.
Recovering Spaghetti said:
Hi everyone,
This is driving me mad. I've been trying to install a bunch of different ROMS on my Samsung Galaxy A10 and while it seemingly installs just fine, when I press "reboot system" it gets into a perpetular loop. Am I doing something wrong here?
Click to expand...
Click to collapse
I don't have experience with Samsung phones in particular, but with Moto phones I've used the online recovery tool to restore the phone back to stock and start over. Not sure there is anything similar with Samsung? Good luck!
jwoegerbauer said:
Bliss OS Rom v14 w/ Android 11 for Samsung A10 Arm64 ( Stable Unofficial ) released 2021View attachment 5799499
IMO you should contact developers of Bliss OS to get your issue fixed.
Click to expand...
Click to collapse
Hi,
The thing is I also tried DotOS & OctaviOS & the issue perseveres
vdun1188 said:
I don't have experience with Samsung phones in particular, but with Moto phones I've used the online recovery tool to restore the phone back to stock and start over. Not sure there is anything similar with Samsung? Good luck!
Click to expand...
Click to collapse
Hi, I believe there is, but the thing is that this is like my third ROM on this phone (Decided to install a new one after my bluetooth headphones refused to connect with my phone while being able to connect just fine to literally everything else) & this is the first time I'm having issues like that. Before, when I managed to install the ROM then it was smooth sailing since hence why I'm asking for help. I've spent a few hours trying different ROMS already.
Recovering Spaghetti said:
Hi, I believe there is, but the thing is that this is like my third ROM on this phone (Decided to install a new one after my bluetooth headphones refused to connect with my phone while being able to connect just fine to literally everything else) & this is the first time I'm having issues like that. Before, when I managed to install the ROM then it was smooth sailing since hence why I'm asking for help. I've spent a few hours trying different ROMS already.
Click to expand...
Click to collapse
Since it has worked fine up to now I'd like to first exhaust all the concievable solutions before going for the nuclear option of stock firmware.
Recovering Spaghetti said:
Since it has worked fine up to now I'd like to first exhaust all the concievable solutions before going for the nuclear option of stock firmware.
Click to expand...
Click to collapse
Understood. For some reason that is beyond my comprehension, it seems it is sometimes suggested to install stock and then a different custom ROM. Again, I don't know what it is actually supposed to do, as I've stayed with LineageOS to keep it simple. I'm not saying to stay with stock, just use it to get phone back to default, then start from there.
nuclear option..stock - hahaha )
Gawd Damit, I tried LineageOS too & a bunch of other stuff & it's always the same problem. I'm all out of ideas now.
Please help, Tried every ROM, same result, doesn't boot
Hi, I've got a Samsung Galaxy A10 SM-A105F and I tried installing all kinds of different roms on it and they install just fine but then when i go to boot to system I end up in this hell hole of perpetual booting and restarting. I've been at it...
forum.xda-developers.com