Related
Hey everyone, longtime lurker here finally going to try to get involved more since I just got a new Moto Z and I don't have much of a background with motorola hardware/software. I'm trying to flash recoveries through fastboot and I can't seem to get it working. I'm probably going to wait a while before I try again since there is not much support for the moto z yet. I am running MPL24.246-45 v6.0.1 XT1650-03, I have unlocked the bootloader through the instructions on the motorola website.
On the bootloader screen I can confirm it is now unlocked, but everytime I flash the TRWP recovery through fastboot I get the error message: "<bootloader> img not working or corrupt". I am trying to flash the most recent twrp recoveries for moto Z (twrp-3.0.2-0-griffin.img) but wasn't able to successfully flash it.
Coming from a samsung background, I might be skipping a step or doing something wrong. I am running the bell canadian firmware. Since I messed up my partitions on my last phone I want to be careful with this one, I mostly want to figure out why I am getting this error while trying to flash the recovery when
my bootloader is unlocked and when I check "adb devices" my moto is being read.
Thanks!!
szork
spacezork said:
Hey everyone, longtime lurker here finally going to try to get involved more since I just got a new Moto Z and I don't have much of a background with motorola hardware/software. I'm trying to flash recoveries through fastboot and I can't seem to get it working. I'm probably going to wait a while before I try again since there is not much support for the moto z yet. I am running MPL24.246-45 v6.0.1 XT1650-03, I have unlocked the bootloader through the instructions on the motorola website.
On the bootloader screen I can confirm it is now unlocked, but everytime I flash the TRWP recovery through fastboot I get the error message: "<bootloader> img not working or corrupt". I am trying to flash the most recent twrp recoveries for moto Z (twrp-3.0.2-0-griffin.img) but wasn't able to successfully flash it.
Coming from a samsung background, I might be skipping a step or doing something wrong. I am running the bell canadian firmware. Since I messed up my partitions on my last phone I want to be careful with this one, I mostly want to figure out why I am getting this error while trying to flash the recovery when
my bootloader is unlocked and when I check "adb devices" my moto is being read.
Thanks!!
szork
Click to expand...
Click to collapse
didn't try it yet, but did you try renaming it to recovery.img (if on windows be sure extenstions are shown so it is not actually recovery.img.img) and run (didn't see which command you are using:
Code:
fastboot flash recovery recovery.img
but search around forums about encryption thing and similar
the ljubich said:
didn't try it yet, but did you try renaming it to recovery.img (if on windows be sure extenstions are shown so it is not actually recovery.img.img) and run (didn't see which command you are using:
Code:
fastboot flash recovery recovery.img
but search around forums about encryption thing and similar
Click to expand...
Click to collapse
I've tried both with the original twrp name and extension as well as with renaming it to recovery.img, didn't seem to make a difference. If I am connection to the device itself does that mean that adb/sideload is installed properly? I mean I was able to unlocked the bootloader so I would assume so.
szork
spacezork said:
I've tried both with the original twrp name and extension as well as with renaming it to recovery.img, didn't seem to make a difference. If I am connection to the device itself does that mean that adb/sideload is installed properly? I mean I was able to unlocked the bootloader so I would assume so.
szork
Click to expand...
Click to collapse
i really don't know then.. if you successfully unlocked bootloader then fastboot should be ok. you can check in device manager. it should be bootloader iterface not adb interface there (you got me confused with mentioning adb so I am just writing to be sure).
also check if your device is shown when typing
Code:
fastboot devices
or try redownloading twrp.
otherwise I am out of ideas, sorry.
the ljubich said:
i really don't know then.. if you successfully unlocked bootloader then fastboot should be ok. you can check in device manager. it should be bootloader iterface not adb interface there (you got me confused with mentioning adb so I am just writing to be sure).
also check if your device is shown when typing
Code:
fastboot devices
or try redownloading twrp.
otherwise I am out of ideas, sorry.
Click to expand...
Click to collapse
Sorry for my confusion with adb/sideload - from what I understand I need both to be able to connect to my device (correct me if im wrong). In the bootloader menu I see "flashing_unlocked" which I believe confirms my bootloader being unlocked, but then at the top of the text right under the dead android guy I see "AP Fastboot Flash Mode (Secure)" could that be an issue?
I can retry downloading the recovery from the TWRP site, but I know I'm downloading the official one already, just can't put my finger on why I'm getting that error message if others are doing it successfully.
thanks for helping :good:
Do you have the Verizon model?
samwathegreat said:
Do you have the Verizon model?
Click to expand...
Click to collapse
I have the canadian BELL model XT1650-03
spacezork said:
I have the canadian BELL model XT1650-03
Click to expand...
Click to collapse
You're at the bootloader, it says Flashing Unlock so yes your bootloader is unlocked and you should be able to flash TWRP no problem.
Did you recently install this .45 firmware? Are you sure that TWRP wasnt actually flashed? I see lots of errors like this from the bootloader and its usually just rubbish.
The twrp does not show the actual memory value of my cell phone and does not let me paste ROM backup, from insufficient memory? how to support it?
I updated my phone to .45 when I bought the phone I believe 1-2 weeks ago, it's definitely NOT flashed as the flashing process runs for 0.2 seconds and fails. I can even boot in the stock recovery afterwards confirming that nothing flashed. I wish I knew what I was doing wrong? possibility of drivers not installed properly?
Before I try and flash recovery I check USB debugging, OEM is unlocked, don't verify ADB files and accept Unknown sources. Is there anything I'm missing?
What if fastboot boot twrpname.img
It's really weird anyway...
enetec said:
What if fastboot boot twrpname.img
It's really weird anyway...
Click to expand...
Click to collapse
I've been doing fastboot flash twrpname.img after opening cmd terminal with SHIFT-MOUSE2 in the designated folder. I have not tried that command specifically what's the difference between doing fastboot flash/boot as far as flashing a recovery.img
edit: I've read on different articles that people sometimes try and flash from the recovery menu? I understood it has to be while your are on the bootloader screen, could it be something to do with that? Or is it still a possibility the drivers may not be installed properly.
spacezork said:
I've been doing fastboot flash twrpname.img after opening cmd terminal with SHIFT-MOUSE2 in the designated folder. I have not tried that command specifically what's the difference between doing fastboot flash/boot as far as flashing a recovery.img
edit: I've read on different articles that people sometimes try and flash from the recovery menu? I understood it has to be while your are on the bootloader screen, could it be something to do with that? Or is it still a possibility the drivers may not be installed properly.
Click to expand...
Click to collapse
With fastboot boot you send recovery to your phone and ask it to boot on it without really flashing it...
It's useful e.g. to take a full stock backup including original recovery, to test a recovery prior to flash it or to use TWRP to root BUT remain on stock recovery...
Not on all phones it works, but on Moto Z should....
P.S.: you have to be on fastboot screen not on recovery when flashing...
enetec said:
With fastboot boot you send recovery to your phone and ask it to boot on it without really flashing it...
It's useful e.g. to take a full stock backup including original recovery, to test a recovery prior to flash it or to use TWRP to root BUT remain on stock recovery...
Not on all phones it works, but on Moto Z should....
P.S.: you have to be on fastboot screen not on recovery when flashing...
Click to expand...
Click to collapse
by fastboot screen you mean the bootloader menu right?
I've been accessing cmd from designated folder with .img file in it
- adb fastboot recovery
- fastboot flash recovery.img..
and I get the "img not working or corrupt" after it tries to flash it (lasts 0.2 seconds) and nothing is done.
spacezork said:
by fastboot screen you mean the bootloader menu right?
I've been accessing cmd from designated folder with .img file in it
- adb fastboot recovery
- fastboot flash recovery.img..
and I get the "img not working or corrupt" after it tries to flash it (lasts 0.2 seconds) and nothing is done.
Click to expand...
Click to collapse
Right, bootloader screen. Enter on it by key-comb... not by command...
Even the real flash take same time... Sending seems to work, is something on verify that doesn't "like" it...
Try to download again recovery and/or check its MD5...
if reading correctly (and what I told you yesterday) command is
fastboot flash recovery recovery.img
and not
fastboot flash recovery.img
hi can any one help me i need to get back to stock and lock boot loader to update i have eu any one please ???????????
Troll amiga said:
hi can any one help me i need to get back to stock and lock boot loader to update i have eu any one please ???????????
Click to expand...
Click to collapse
try following this instructions: http://forum.xda-developers.com/showpost.php?p=69065373&postcount=14
and download eu rom from here: https://mirrors.lolinet.com/firmware/moto/griffin/official/RETEU/
i don't know from which ROM you are coming, don't know if downgrading works, but this was onl RETEU ROM i could find.
I have the exact same phone and I've upgraded to Nougat but I got my TWRP working. You need an unlocked bootloader and after upgrading to nougat, the option "unlock OEM" need to be enabled again.
I've used this TWRP : https://dl.twrp.me/griffin/twrp-3.0.2-0-griffin.img.html
Also I tried to only boot on it at first with the command fastboot boot twrp.img then I saw it was working, I flashed it with fastboot flash recovery twrp.img but got the error : (bootloader) image not signed or corrupt . But I booted the recovery from the bootloader and TWRP was working even with this error.
cilk said:
...I flashed it with fastboot flash recovery twrp.img but got the error : (bootloader) image not signed or corrupt . But I booted the recovery from the bootloader and TWRP was working even with this error.
Click to expand...
Click to collapse
Yeessss... I don't know how could I forgot it!!! :silly:
The message (I forgot I received too...) is *only* to indicate that recovery is not signed! But before there is a clear "Done" confirming the flash!
Just boot on it!
Hello
I bought a Huawei x2 and brought a Chinese rom that gave me many problems.
I tried to ask him for updates using the "dload" method but he gave me an error.
The fact is that I formatted it from Flashtool thinking that I had the bootloader open.
After trying everything, he discovered that the bootloader is closed, but now the phone does not boot because I think I have flashed the entire system.
Flash a recovery, it makes me ok but then it does not pass Huawei's logo.
I guess without opening the bootloader it will be impossible to fix it.
I can access the Fastboot mode but I do not know what to do.
I also tried to flash img from the Huawei Extractor, which had previously worked on another X2 that I had brickered.
I guess without the open bootloader it's impossible to do anything.
I need your help. Thank you
Checked in fastboot, bootloader is unlocked.
But I cant install Twrp
I erase system, boot, user data etc
And now I dont have fastboot mode
Running error
boot image security verify failed
Help, please
lobodemonte said:
I erase system, boot, user data etc
And now I dont have fastboot mode
Running error
boot image security verify failed
Help, please
Click to expand...
Click to collapse
Flash this boot.img in fastboot which should still work. This boot.img is from B212 but should work on any B2xx rom. I'm not sure how else to help you when I don't know much about your device.
https://drive.google.com/file/d/1Ss3nkPJhQrlfHRgQzBRqXxTw6N7Pmz91/view?usp=sharing
Thanks ,but now I dont have access to fastboot mode
You have to use a usb cable and connect your phone to your PC first.
Then press volume down first + power to boot into Fastboot.
I know how use fastboot but now phone cant enter in fastboot..
Boot from B212 dont work
lobodemonte said:
Boot from B212 dont work
Click to expand...
Click to collapse
I don't know how else to help you. If you want to ship me your device Ill get it working for you and ship it back. You should always be able to get into the bootloader to run fastboot commands.
Now I can enter in fastboot.
I tried ALL but dont works.
Hello fellow A2 Lite owners!
I just got this device today and would LOVE to root 10.0.7.0, However it seems like the only way to go through this is by using a patched boot image which is not viable because none have showed up for 10.0.7.0 yet.
Will there be any other solutions for this? Thank you.
lgstylus2root said:
Hello fellow A2 Lite owners!
I just got this device today and would LOVE to root 10.0.7.0, However it seems like the only way to go through this is by using a patched boot image which is not viable because none have showed up for 10.0.7.0 yet.
Will there be any other solutions for this? Thank you.
Click to expand...
Click to collapse
I personally feel installing twrp offians twrp and flashing magisk is easyer
rob420p said:
I personally feel installing twrp offians twrp and flashing magisk is easyer
Click to expand...
Click to collapse
Obviously, It is my preferred way since I used it on a couple of devices including my Redmi Note 4 and Mi Pad.
My concern is not OTA but whether it would somehow break the ROM
Yes, I am aware of Mi Flash, Flashing stock ROMS, and other techniques but it's just that i don't have time for such long endeavors and would like to have a safe-ish way.
However I will try to get twrp running temporarily to install magisk.
lgstylus2root said:
Obviously, It is my preferred way since I used it on a couple of devices including my Redmi Note 4 and Mi Pad.
My concern is not OTA but whether it would somehow break the ROM
Yes, I am aware of Mi Flash, Flashing stock ROMS, and other techniques but it's just that i don't have time for such long endeavors and would like to have a safe-ish way.
However I will try to get twrp running temporarily to install magisk.
Click to expand...
Click to collapse
No it will not break the ROM I'm running the March update with twrp n magisk the only thing that does not work is backup n restore there is a new twrp 3.3.3.0 but I haven't installed it yet.
rob420p said:
No it will not break the ROM I'm running the March update with twrp n magisk the only thing that does not work is backup n restore there is a new twrp 3.3.3.0 but I haven't installed it yet.
Click to expand...
Click to collapse
How did you get TWRP to work? I am using the official image but whenever i boot into the .img, click cancel as instructed, and install the twrp zip, the result is that when i try to boot into recovery it says System has been destroyed (recovery only, normal boot is ok)
lgstylus2root said:
How did you get TWRP to work? I am using the official image but whenever i boot into the .img, click cancel as instructed, and install the twrp zip, the result is that when i try to boot into recovery it says System has been destroyed (recovery only, normal boot is ok)
Click to expand...
Click to collapse
Go to the pa ROM page and use that twrp that's offians twrp.the best guild ive seen n is type in customdriod mi a2 lite twrp and that page is the best in my opinion to follow I'll see if I can get a link for the page in a minute
Won't let me simend the link
rob420p,
Please provide links.
rob420p said:
Won't let me simend the link
Click to expand...
Click to collapse
Would you be capable of private messaging me the link?
I might have been able to find the link:
ww w.thecustom droid.com /install-twrp-recovery-root-xiaomi-mi-a2-a2-lite
Obviously remove all spaces.
lgstylus2root said:
I might have been able to find the link:
ww w.thecustom droid.com /install-twrp-recovery-root-xiaomi-mi-a2-a2-lite
Obviously remove all spaces.
Click to expand...
Click to collapse
I have followed this guide but it would always result in the installed version of TWRP not installing correctly, and the system mentioning "The System has been destroyed, Press power button to shut down"
How can i resolve this?
I just uploaded the boot and patched_boot imgs for 10.0.7.0 (March update) here are the links:
Stock boot.img : https://drive.google.com/open?id=17ukUahutrGCcx38ZXfzMaCCle71M_QuP
Patched boot.img with latest Magisk (07.04.2019 - I suggest patching the stock on your own to root the device) : https://drive.google.com/open?id=1RxFZcwi0utL3qGp9LKDMneBbggNMHmGY
marstonpear said:
I just uploaded the boot and patched_boot imgs for 10.0.7.0 (March update) here are the links:
Stock boot.img : https://drive.google.com/open?id=17ukUahutrGCcx38ZXfzMaCCle71M_QuP
Patched boot.img with latest Magisk (07.04.2019 - I suggest patching the stock on your own to root the device) : https://drive.google.com/open?id=1RxFZcwi0utL3qGp9LKDMneBbggNMHmGY
Click to expand...
Click to collapse
I figured out how to do it either way, thank you for your efforts however!
lgstylus2root said:
I figured out how to do it either way, thank you for your efforts however!
Click to expand...
Click to collapse
You can add the links to the main thread so that people can see :good:
Hi
Im trying to root V10.0.7.0.PDLMIXM Android on my A2 Lite with Magisk.
After fastboot boot patched_boot.img
Im getting bootloop, phone cannot boot (google lines endless loading).
After restart, goes well but no root.
Please help ! Thanks
max-damage said:
Hi
Im trying to root V10.0.7.0.PDLMIXM Android on my A2 Lite with Magisk.
After fastboot boot patched_boot.img
Im getting bootloop, phone cannot boot (google lines endless loading).
After restart, goes well but no root.
Please help ! Thanks
Click to expand...
Click to collapse
Search before asking : https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-proper-support-ota-t3836952
I did search and I followed procedure.
My phone fails to boot on step 10. when I load temporary patched boot.img over fastboot.
Thats my current problem.
I tried to load up downloaded pached boot.img for version V10.0.7.0.PDLMIXM
I also tried to make patched boot.img from original boot.img over phone via Magisk. It doesnt work, bootloop again.
max-damage said:
I did search and I followed procedure.
My phone fails to boot on step 10. when I load temporary patched boot.img over fastboot.
Thats my current problem.
I tried to load up downloaded pached boot.img for version V10.0.7.0.PDLMIXM
I also tried to make patched boot.img from original boot.img over phone via Magisk. It doesnt work, bootloop again.
Click to expand...
Click to collapse
I'm stuck with the same problem.
Booting with patched_boot.img (made on my own or downloaded from this forum) make the phone not starting, blocked on white screen.
Have you already solved?
lgstylus2root said:
How did you get TWRP to work? I am using the official image but whenever i boot into the .img, click cancel as instructed, and install the twrp zip, the result is that when i try to boot into recovery it says System has been destroyed (recovery only, normal boot is ok)
Click to expand...
Click to collapse
Only boot twrp not to Flash it...
Boot twrp command » fastboot boot twrp.img
Flash twrp command » fastboot flash recovery twrp.img
I assume you tried "flashing twrp" command, if that's the case it will replace your boot.img to twrp.img that's why it appears the "system has been destroyed" error... Try the "boot twrp command" if you want to access twrp temporarily... Coz right now we cant do(flash full twrp recovery) that as far as I know....
Winchester316 said:
Only boot twrp not to Flash it...
Boot twrp command » fastboot boot twrp.img
Flash twrp command » fastboot flash recovery twrp.img
I assume you tried "flashing twrp" command, if that's the case it will replace your boot.img to twrp.img that's why it appears the "system has been destroyed" error... Try the "boot twrp command" if you want to access twrp temporarily... Coz right now we cant do(flash full twrp recovery) that as far as I know....
Click to expand...
Click to collapse
I believe we can I have heard reports offains 3.3.3. Twrp can do it I haven't tryed yet.but I did have twrp with root running on the march update but I'm on pa now
I installed the Stable Android 10 on my GM1910 via TWRP, totally forgetting about maintaining root and TWRP.
So how do I bring back TWRP and root?
fastboot boot doesn't seem to work, I managed to pull the boot.img and patch it with Magisk from another device but flashing it through fastboot ends up in an endless bootanimation.
Could anyone help me? here's a link of the boot.img i pulled, it works if you flash it without magisk patching it.
Link: https://drive.google.com/file/d/1O8lF1UDwwu0zT8ro5Q1gKKfdxF-HGPEW/view?usp=sharing
(Almost) exactly the same here. I tired flashing a patched boot.img, it actually boots - but magisk manager gets stuck on the splash screen and some apps, including chrome, won't start. Trying to boot TWRP results in the phone getting stuck on the "fastboot mode" screen.
My only solution would be to downgrade, root, keep the upgrade this time. But because my ISP is doing some maintenance work I don't have wifi - and restoring my phone through mobile data does not seem to work correctly.
EDIT: In fastboot, neither bootloader version nor baseband version are show, product name is "msmnile". Has this always been that way?
EDIT 2, solution:
I extracted the boot.img from the device, and patched it using magisk on the same phone:
https://drive.google.com/file/d/1-Gf-6iXSFuYT5xDR-mnLKANvkXUHal9e/view?usp=sharing
Run this command in fastboot so you know which is the CURRENT active slot :
Code:
fastboot getvar current-slot
Run this command so you can flash the correct slot :
Code:
fastboot flash boot_X magisk_patched.img
replace X with the a or b from the command before.
:good:
dmj0shu4 said:
I installed the Stable Android 10 on my GM1910 via TWRP, totally forgetting about maintaining root and TWRP.
So how do I bring back TWRP and root?
fastboot boot doesn't seem to work, I managed to pull the boot.img and patch it with Magisk from another device but flashing it through fastboot ends up in an endless bootanimation.
Could anyone help me? here's a link of the boot.img i pulled, it works if you flash it without magisk patching it.
Link: https://drive.google.com/file/d/1O8lF1UDwwu0zT8ro5Q1gKKfdxF-HGPEW/view?usp=sharing
Click to expand...
Click to collapse
Hi sorry to hear that you got this problem and hopefully it gets fixed. I have another question: does that mean using TWRP to completely clean the device then installing Android 10 via zip will remove TWRP and fastboot everything? Does that mean after installing, everything will be refreshed like a box opened phone?
dmj0shu4 said:
I installed the Stable Android 10 on my GM1910 via TWRP, totally forgetting about maintaining root and TWRP.
So how do I bring back TWRP and root?
fastboot boot doesn't seem to work, I managed to pull the boot.img and patch it with Magisk from another device but flashing it through fastboot ends up in an endless bootanimation.
Could anyone help me? here's a link of the boot.img i pulled, it works if you flash it without magisk patching it.
Link: https://drive.google.com/file/d/1O8lF1UDwwu0zT8ro5Q1gKKfdxF-HGPEW/view?usp=sharing
Click to expand...
Click to collapse
If you have an endless boot animation you might be trying to boot from the wrong slot, try using the fastboot set_active command to change slot, then restart
h0l said:
Run this command in fastboot so you know which is the CURRENT active slot :
Run this command so you can flash the correct slot : replace X with the a or b from the command before.
:good:
Click to expand...
Click to collapse
I got a bit confused.
If the current slot is boot_a, i flash it in boot_b or am I supposed to flash on the one that isn't the current slot?
djsubterrain said:
If you have an endless boot animation you might be trying to boot from the wrong slot, try using the fastboot set_active command to change slot, then restart
Click to expand...
Click to collapse
Which is the default active slot? Is it okay to use either of the 2?
dmj0shu4 said:
Which is the default active slot? Is it okay to use either of the 2?
Click to expand...
Click to collapse
Either one should work if the rom and the rooted boot image is on it (If you are rooting). That's why you should install using TWRP, if you look in the reboot menu it will show you the active slot.
djsubterrain said:
Either one should work if the rom and the rooted boot image is on it (If you are rooting). That's why you should install using TWRP, if you look in the reboot menu it will show you the active slot.
Click to expand...
Click to collapse
I would've used TWRP but it won't let me boot into it
fastboot boot [recovery.img] does not seem to work for android 10, atleast on my case
dmjoshu4 said:
I got a bit confused.
If the current slot is boot_a, i flash it in boot_b or am I supposed to flash on the one that isn't the current slot?
Click to expand...
Click to collapse
You are supposed to flash it in the one that IS the active one. Because you do want to root the slot that you'll be booting.
does that mean using TWRP to completely clean the device then installing Android 10 via zip will remove TWRP and fastboot everything? I.e. everything will be refreshed like a box opened phone?
gh279760559 said:
does that mean using TWRP to completely clean the device then installing Android 10 via zip will remove TWRP and fastboot everything? I.e. everything will be refreshed like a box opened phone?
Click to expand...
Click to collapse
not everything, just twrp and root will be gone if you restarted without installing magisk to the inactive slot
h0l said:
(Almost) exactly the same here. I tired flashing a patched boot.img, it actually boots - but magisk manager gets stuck on the splash screen and some apps, including chrome, won't start. Trying to boot TWRP results in the phone getting stuck on the "fastboot mode" screen.
My only solution would be to downgrade, root, keep the upgrade this time. But because my ISP is doing some maintenance work I don't have wifi - and restoring my phone through mobile data does not seem to work correctly.
EDIT: In fastboot, neither bootloader version nor baseband version are show, product name is "msmnile". Has this always been that way?
EDIT 2, solution:
I extracted the boot.img from the device, and patched it using magisk on the same phone:
https://drive.google.com/file/d/1-Gf-6iXSFuYT5xDR-mnLKANvkXUHal9e/view?usp=sharing
Run this command in fastboot so you know which is the CURRENT active slot :
Code:
fastboot getvar current-slot
Run this command so you can flash the correct slot :
Code:
fastboot flash boot_X magisk_patched.img
replace X with the a or b from the command before.
:good:
Click to expand...
Click to collapse
dude, thanks for this, i was banging my head against a wall trying to get root to work. I used your patched boot img and i had the version mismatch, but i local updated my android and it has root!
dmj0shu4 said:
I would've used TWRP but it won't let me boot into it
fastboot boot [recovery.img] does not seem to work for android 10, atleast on my case
Click to expand...
Click to collapse
I have not been able to boot TWRP either in fastboot mode - got stuck at "OnePlus Logo FastBoot" black screen.
Hi guys.. can you post the steps in rooting android 10??
I've already had bootloader unlocked.
Do i need to.follow the steps intended for android 9??
Like
1. Install TWRP via fastboot.. (2files)
2. Reboot to twrp.
3. Flash magisk via twrp??
Is that it?? If so. Then after reading this thread.. some of. You mentioned about boot. Img?? Patched?? What's that supposed to mean?? Sir??
Thanks. Any advice is highly appreciated..
---------- Post added at 08:30 AM ---------- Previous post was at 08:28 AM ----------
And by the way..
Im on Gm1910 model. Global rom. Gm21AA build.. if that info would matter.. i dont actually need the root on android 9. Coz parallel app is working.. but now in android 10. It isnt working.. so.i need to root to grant su to game guardian.. thanks..
MigbyPie said:
I have not been able to boot TWRP either in fastboot mode - got stuck at "OnePlus Logo FastBoot" black screen.
Click to expand...
Click to collapse
Same.
I've read that Q/10 is different and you can't install TWRP like that anymore. Supposedly you need to use the MSM tool or the all-in-one tool but I've tried both of those and still can't boot to TWRP.
E30Nova said:
Same.
I've read that Q/10 is different and you can't install TWRP like that anymore. Supposedly you need to use the MSM tool or the all-in-one tool but I've tried both of those and still can't boot to TWRP.
Click to expand...
Click to collapse
Hopefully there will be a solution. I had tried to update from Pie to Q10 while staying rooted and it didn't work. So I had to wipe the whole device and decided to wait for a smoother root method for my device. If you have any other ideas about rooting Q10 let me know. Thank you
h0l said:
(Almost) exactly the same here. I tired flashing a patched boot.img, it actually boots - but magisk manager gets stuck on the splash screen and some apps, including chrome, won't start. Trying to boot TWRP results in the phone getting stuck on the "fastboot mode" screen.
My only solution would be to downgrade, root, keep the upgrade this time. But because my ISP is doing some maintenance work I don't have wifi - and restoring my phone through mobile data does not seem to work correctly.
EDIT: In fastboot, neither bootloader version nor baseband version are show, product name is "msmnile". Has this always been that way?
EDIT 2, solution:
I extracted the boot.img from the device, and patched it using magisk on the same phone:
https://drive.google.com/file/d/1-Gf-6iXSFuYT5xDR-mnLKANvkXUHal9e/view?usp=sharing
Run this command in fastboot so you know which is the CURRENT active slot :
Code:
fastboot getvar current-slot
Run this command so you can flash the correct slot :
Code:
fastboot flash boot_X magisk_patched.img
replace X with the a or b from the command before.
:good:
Click to expand...
Click to collapse
You saved my life! Thank you!
But how do we get twrp now? Is there any way?
Me too. Use tool all in one but it doesnt work. Stuck at "waiting twrp boots".
Any help, thanks.
Same here any Solution?
Sent from my GM1911 using Tapatalk
---------- Post added at 08:14 AM ---------- Previous post was at 08:14 AM ----------
Stuck at Fastboot booting when flashed img and also zip
Sent from my GM1911 using Tapatalk
I updated my phone to 10 last night, followed the same guide as I have for every other update but this time I lost root for some reason.
I still have TWRP recovery on there but it can't read internal storage so I can't flash Magisk.
I tried changing file system to ext 2 then back to 4 and then repairing it as I read elsewhere and this wiped the phone obviously but internal storage seemed to be working until I set the phone up again, downloaded Magisk, rebooted to recovery and I'm back where I started, internal storage showing as 0mb in TWRP.
Any ideas how to fix?
Hi guys,
so after I got my xiaomi with a global ROM and wanted to update and that is when I accidentally relocked the bootloader. The version of ROM was invalid apparently and wouldn't let me boot and now I'm stuck in fastboot mode.
My problem is as follows:
-can't enter recovery, stuck at fastboot no matter how many times I try and reboot
-adb not working since I didn't enable it
-bootloader locked (miflash says so and it can't unlock it since I didn't check 'oem unlock enable' and I cannot boot ROM so I can't enable it)
-fastboot flashing says 'not allowed in lock state'
-edl mode not available
I've seen tutorials where people opened their phones to force the phone into edl mode via the testing points but is that the only way`?
Any suggestions on how I could unbrick it?
Much appreciated
yes, it is the only way.
koniv90 said:
Hi guys,
Any suggestions on how I could unbrick it?
Much appreciated
Click to expand...
Click to collapse
you can use this tool to flash the phone on fastboot mode
Xiaomi King Tool - Home.
xiaomikingtool.com
its cost you only 5 credit
Can you flash files by fastboot? if so, flash the global rom images one by one, then reboot
I know this is a late reply, but I was in a similar situation with my phone and here is how I dealt with it: You need to access EDL mode, it doesn't require disassembling the device like the other user here suggested. Here is a thread you can find several variations of fixes here: https://forum.xda-developers.com/t/xiaomi-12-pro-completely-bricked-dead.4422997/
If anyone needs help with a locked bootloader bootlooped phone and doesn't know what to do I can help for a fee.
eclipsek20 said:
I know this is a late reply, but I was in a similar situation with my phone and here is how I dealt with it: You need to access EDL mode, it doesn't require disassembling the device like the other user here suggested. Here is a thread you can find several variations of fixes here: https://forum.xda-developers.com/t/xiaomi-12-pro-completely-bricked-dead.4422997/
If anyone needs help with a locked bootloader bootlooped phone and doesn't know what to do I can help for a fee.
Click to expand...
Click to collapse
I need help please my phone redmi k50 gaming is no recovery and . bootloader is locked
eclipsek20 said:
I know this is a late reply, but I was in a similar situation with my phone and here is how I dealt with it: You need to access EDL mode, it doesn't require disassembling the device like the other user here suggested. Here is a thread you can find several variations of fixes here: https://forum.xda-developers.com/t/xiaomi-12-pro-completely-bricked-dead.4422997/
If anyone needs help with a locked bootloader bootlooped phone and doesn't know what to do I can help for a fee.
Click to expand...
Click to collapse
Please I have pocophone f1 which says system has been destroyed I have downloaded the firmware xiaomi_poco_f1_V12.0.2.0.QEJRUXM_20200907.0000.00_Gobal_10_XFT (by xiaomistockrom.com) and Qualcom Driver V1.0 and MiFlash tool 20210226 and ADB drive R13 and MiFlash unlock tool en-3.5.1128.45 and platform tool r33.0.3-windows after installing all this drives the phone doesn't want to flash when I use MIFLASH TOOL to flash it say ERROR FLASH IS NOT ALLOWED IN LOCK STATE MODE. when I use windows powershell it says the same thing it looks like the bootloader is lock and I don't know the xiaomi e-mail, number and password on the phone pls help me
This what I'm facing
Dims_Camper said:
yes, it is the only way.
Click to expand...
Click to collapse
So even with a locked bootloader and disabled developer options, I can still flash stock rom in edl mode, regardless?
kskksks said:
So even with a locked bootloader and disabled developer options, I can still flash stock rom in edl mode, regardless?
Click to expand...
Click to collapse
Nope, only very old devices.
NOSS8 said:
Nope, only very old devices.
Click to expand...
Click to collapse
So that's why I get the error "operation not allowed for write" in QFIL... What do i do then? Is there a way to unlock bootloader in edl mode? I can't access recovery mode because of the bootloop... Only EDL mode
kskksks said:
So that's why I get the error "operation not allowed for write" in QFIL... What do i do then? Is there a way to unlock bootloader in edl mode? I can't access recovery mode because of the bootloop... Only EDL mode
Click to expand...
Click to collapse
Have you tried to flash stock rom?
I mean, if you have Chinese rom before, just flash with latest Chinese rom.
Ghanaba said:
Please I have pocophone f1 which says system has been destroyed I have downloaded the firmware xiaomi_poco_f1_V12.0.2.0.QEJRUXM_20200907.0000.00_Gobal_10_XFT (by xiaomistockrom.com) and Qualcom Driver V1.0 and MiFlash tool 20210226 and ADB drive R13 and MiFlash unlock tool en-3.5.1128.45 and platform tool r33.0.3-windows after installing all this drives the phone doesn't want to flash when I use MIFLASH TOOL to flash it say ERROR FLASH IS NOT ALLOWED IN LOCK STATE MODE. when I use windows powershell it says the same thing it looks like the bootloader is lock and I don't know the xiaomi e-mail, number and password on the phone pls help me
Click to expand...
Click to collapse
Try to flash the .img files of the fastboot rom, unzip the rom and find all the .img files and flash them with CMD from fastboot, one by one
jholfran3 said:
Try to flash the .img files of the fastboot rom, unzip the rom and find all the .img files and flash them with CMD from fastboot, one by one
Click to expand...
Click to collapse
Hello, My Poco X3 System destroyed itself while I was using it, it showed a glitch screen and turned off. Now I went to flash my mobile through Miflash but it showed the bootloader is locked and now I can't unlock it as the system itself is destroyed and can't do anything. So i wanted to know if i can flash my mobile with cmd as you said above flashing img files one by one or let me know if there is any method to flash my mobile or unlock the bootloader? Please me help bro
flashing is possible with modified firehose programmer (no auth factory loader) or with authorized xiaomi account. both solutions are paid service and cannot advertised here.
please -as always- read the thread you posted in. I can see useful information shared already. wait for other replies.
letsgofly said:
Hello, My Poco X3 System destroyed itself while I was using it, it showed a glitch screen and turned off. Now I went to flash my mobile through Miflash but it showed the bootloader is locked and now I can't unlock it as the system itself is destroyed and can't do anything. So i wanted to know if i can flash my mobile with cmd as you said above flashing img files one by one or let me know if there is any method to flash my mobile or unlock the bootloader? Please me help bro
Click to expand...
Click to collapse
Hi, try to flash the .img files from the fastboot stock rom whit cdm in fastboot, one by one, some files will give error but skip that, then reboot the phone as normal, it should work.
example:
fastboot flash boot boot.img
fastboot flash cust cust.img
etc.
jholfran3 said:
Hi, try to flash the .img files from the fastboot stock rom, one by one, some files will give error but skip that, then reboot the phone as normal, it should work.
Click to expand...
Click to collapse
If it were that simple, it would have been known for a long time.
You have already posted about this (post#14).
NOSS8 said:
If it were that simple, it would have been known for a long time.
You have already posted about this (post#14).
Click to expand...
Click to collapse
I had a Mi 9T and by mistake I installed a recovery that didn't correspond to it, the phone got bricked, and the only way to save it was like this, I searched and read everywhere but I couldn't find a solution, flashing the .img files was my idea, I didn't know if it would work but it did.
:V
jholfran3 said:
I had a Mi 9T and by mistake I installed a recovery that didn't correspond to it, the phone got bricked, and the only way to save it was like this, I searched and read everywhere but I couldn't find a solution, flashing the .img files was my idea, I didn't know if it would work but it did.
:V
Click to expand...
Click to collapse
To install a recovery, the bootloader must be unlocked.