1. Unlock bootloader via MI Flash Tool
2. Install ADB and Fastboot Drivers
3. Downloader Latest Platform Tools
4. Open command prompt window in platform tools folder
5. Take phone to fastboot mode (Adb reboot bootloader)
6. Flash the given boot image (Fastboot flash boot boot.img)
7. Flash the given vbmeta (Fastboot flash vbmeta vbmeta.img)
8. Reboot (Fastboot reboot)
9. Download, install and open latest magisk manager in phone. It will reboot phone.
10. Done. You have root now. Verify via root checker.
Credits: @Tigrouzen
is there any bug or issue with miui rom after root? and how to install twrp or any other custom recovery?
ji-r47 said:
is there any bug or issue with miui rom after root? and how to install twrp or any other custom recovery?
Click to expand...
Click to collapse
Some games will start to crash, and some apps wont work because they will detect root and close down. You can flash stock boot and vbmeta image to unroot and they will work.
Unofficial TWRP (compiled by @Tigrouzen) is attached. Flash in fastboot mode and then flash vbmeta from above.
ahsan.ey.ca said:
Some games will start to crash, and some apps wont work because they will detect root and close down. You can flash stock boot and vbmeta image to unroot and they will work.
Unofficial TWRP (compiled by @Tigrouzen) is attached. Flash in fastboot mode and then flash vbmeta from above.
Click to expand...
Click to collapse
Thank you very much
ahsan.ey.ca said:
Some games will start to crash, and some apps wont work because they will detect root and close down. You can flash stock boot and vbmeta image to unroot and they will work.
Unofficial TWRP (compiled by @Tigrouzen) is attached. Flash in fastboot mode and then flash vbmeta from above.
Click to expand...
Click to collapse
Do you have source code for it?
VD171 said:
Do you have source code for it?
Click to expand...
Click to collapse
Not my work, ask @Tigrouzen .
It's working. I don't have to install any ROM to root the phone. Thanks.
This can be done with any version of ROM? I have India version 12.0.9
@sakeyo i dont think region is important for this process, the only diference is the bloatware inside the rom,
if it doesnt works, you can just flash back the stock boot.img and vbmeta.img
or if you want, you can change the ROM to Global
I used XiaomiToolv2 https://www.xiaomitool.com/V2/
It works perfectly on my device. Thanks!
Hi Sakeyo. Please tell me what version of Magisk did you use?
Thanks in advance
asia559571 said:
Hi Sakeyo. Please tell me what version of Magisk did you use?
Thanks in advance
Click to expand...
Click to collapse
Im using the latest magisk version, it works flawlessly
its the version 23
yoshijulas said:
Im using the latest magisk version, it works flawlessly
its the version 23
Click to expand...
Click to collapse
Thank You yoshijulas for your reply and Kind Regards
asia559571 said:
Hi Sakeyo. Please tell me what version of Magisk did you use?
Thanks in advance
Click to expand...
Click to collapse
Hello. I am currently not rooted. I removed Magisk and closed the bootloader. But when I was rooted I always used the latest versions of Magisk.
sakeyo said:
Hello. I am currently not rooted. I removed Magisk and closed the bootloader. But when I was rooted I always used the latest versions of Magisk.
Click to expand...
Click to collapse
To be honest, I only wanted root for the sake of having ViPER4Android. I tried the rootless version, but it failed on my phone... got stuck in a boot loop. I'm using Black Player Ex, the equalizer in tandem with the Mi Sound Enhancer works like a charm. One thing I noticed, is that the sound level on the Global Rom is very low compared to the Chinese version, so I'm sticking to the Chinese Rom. If You come across ViPER that can be installed on our device without the need for root, Please let me know. It's a shame that Xiaomi wouldn't/don't have ViPER pre-installed as a system app?
Best Regards
ahsan.ey.ca said:
Some games will start to crash, and some apps wont work because they will detect root and close down. You can flash stock boot and vbmeta image to unroot and they will work.
Unofficial TWRP (compiled by @Tigrouzen) is attached. Flash in fastboot mode and then flash vbmeta from above.
Click to expand...
Click to collapse
@ahsan.ey.ca I know you just need boot.img and vbmeta.img to get root, but when you installed recovery.img did you get the frozen screen where you can't swipe to unlock twrp?
I'm paranoid, will this boot and vbmeta work on any MiUI version?
Reyproject said:
I'm paranoid, will this boot and vbmeta work on any MiUI version?
Click to expand...
Click to collapse
Not sure.
Probably boot can works.
But the vbmeta certainly works on any version.
Where can I find the boot.img for flashing recovery?
criza said:
Where can I find the boot.img for flashing recovery?
Click to expand...
Click to collapse
Try here:
[IMG][ROOT][PATCHED] Magisk Patched Boot: ROOTED Images Partitions for DANDELION (Redmi 9A / Redmi 9AT)
Magisk Patched BOOT.IMG for DANDELION ROOT / PREROOT ROOTED / PREROOTED Works with: - Xiaomi Redmi 9A - Xiaomi Redmi 9AT Does NOT work with: - Xiaomi Redmi 10A Firmware Versions: - (Engineering) 246 - (Engineering) 440 - (Indonesia)...
forum.xda-developers.com
Related
Magisk Root now Works on Nokia 3 Device! You can flash it on Twrp recovery, and no errors comes up! (Like software update stopped working and cust manager) it requires stock boot image.
Link https://www.mediafire.com/folder/n2dmcnfjl7mz88h,4771ez9ddvccuim
In link, there is Magisk and Boot.img
RootingPro-18 said:
Magisk Root now Works on Nokia 3 Device! You can flash it on Twrp recovery, and no errors comes up! (Like software update stopped working and cust manager) it requires stock boot image.
Link https://www.mediafire.com/folder/n2dmcnfjl7mz88h,4771ez9ddvccuim
In link, there is Magisk and Boot.img
Click to expand...
Click to collapse
this is modified boot.img to work with magisk without errors, right? How to do this for SuperSU
SkaboXD said:
this is modified boot.img to work with magisk without errors, right? How to do this for SuperSU
Click to expand...
Click to collapse
No, this is clean boot img. Magisk you have to flash by yourself
Hello everyone,
if u want to install Magisk without flashing unoffical TWRP here are the steps. U still need to have unlocked Bootloader:
Seems only Global Version works ... Have a try:
1. Download Systemupdate via OTA
2. Copy it to Computer (located InternalStorage/downloaded_rom)
3. Extract "boot.img"
4. Copy it back to your Mix 2s
5. Install Magisk Manager 5.7.0
6. Open Magisk Manager and click install & install
7. select patch Boot-Image
8. Open "boot.img" with Filemanager
9. After Magisk is finished copy "patched_boot.img" (located InternalStorage/MagiskManager) to PC
10. Boot into Fastboot
11. Flash with "fastboot.exe flash boot patched_boot.img" without ""
12. Reboot Mi Mix 2s and u're rooted now
This Boot-Image is for 9.5.19.0 Global:
https://drive.google.com/file/d/1OPvkYbl5rHRMhb7naJPSEzkQSdAvg1VD/view?usp=sharing
This Boot-Image is for 9.5.20.0 Global:
https://drive.google.com/file/d/1r1Gva4DwVmzgyQB5AYK9mB2hwAXLGedK/view?usp=sharing
Try at your own Risk
MainderX said:
Hello everyone,
if u want to install Magisk without flashing unoffical TWRP here are the steps. U still need to have unlocked Bootloader:
1. Download Systemupdate via OTA
2. Copy it to Computer (located InternalStorage/downloaded_rom)
3. Extract "boot.img"
4. Copy it back to your Mix 2s
5. Install Magisk Manager 5.7.0
6. Open Magisk Manager and click install & install
7. select patch Boot-Image
8. Open "boot.img" with Filemanager
9. After Magisk is finished copy "patched_boot.img" (located InternalStorage/MagiskManager) to PC
10. Boot into Fastboot
11. Flash with "fastboot.exe flash boot patched_boot.img" without ""
12. Reboot Mi Mix 2s and u're rooted now
This Boot-Image is for 9.5.19.0 Global:
h**ps://drive.google.com/file/d/1OPvkYbl5rHRMhb7naJPSEzkQSdAvg1VD/view?usp=sharing
Click to expand...
Click to collapse
Nice workaround, didn't try yet, but i'm tempted to do this way....
So with thsi patched_boot image, it's just follow steps 10, 11 and 12
ruicc said:
Nice workaround, didn't try yet, but i'm tempted to do this way....
So with thsi patched_boot image, it's just follow steps 10, 11 and 12
Click to expand...
Click to collapse
Yes you just need to flash ist with Fastboot and install Magisk Manager
It's very helpful , thanks much .
MainderX said:
Hello everyone,
if u want to install Magisk without flashing unoffical TWRP here are the steps. U still need to have unlocked Bootloader:
1. Download Systemupdate via OTA
2. Copy it to Computer (located InternalStorage/downloaded_rom)
3. Extract "boot.img"
4. Copy it back to your Mix 2s
5. Install Magisk Manager 5.7.0
6. Open Magisk Manager and click install & install
7. select patch Boot-Image
8. Open "boot.img" with Filemanager
9. After Magisk is finished copy "patched_boot.img" (located InternalStorage/MagiskManager) to PC
10. Boot into Fastboot
11. Flash with "fastboot.exe flash boot patched_boot.img" without ""
12. Reboot Mi Mix 2s and u're rooted now
This Boot-Image is for 9.5.19.0 Global:
h**ps://drive.google.com/file/d/1OPvkYbl5rHRMhb7naJPSEzkQSdAvg1VD/view?usp=sharing
Click to expand...
Click to collapse
I'm try but it not work for me. my mi mix 2s not boot
heobanhki said:
I'm try but it not work for me. my mi mix 2s not boot
Click to expand...
Click to collapse
Did you use my patched_boot Image or created you're own?
MainderX said:
Did you use my patched_boot Image or created you're own?
Click to expand...
Click to collapse
I used both, use boot.img patched download from your link and patch my boot by magick.
Reflash boot.img (original) device is good boot.
Sorry for my English.
heobanhki said:
I used both, use boot.img patched download from your link and patch my boot by magick.
Reflash boot.img (original) device is good boot.
Sorry for my English.
Click to expand...
Click to collapse
Anyone else with this problem?
MainderX said:
Anyone else with this problem?
Click to expand...
Click to collapse
The model m1803d5xe version( known as 6GB ram black color version in China, have limited bands) probably has a limit on flashing root( magisk) in the Global rom. It will cause bootloop and currently have no solution. The m1803d5xa version( Global version) works well.
simonsmh said:
The model m1803d5xe version( known as 6GB ram black color version in China, have limited bands) probably has a limit on flashing root( magisk) in the Global rom. It will cause bootloop and currently have no solution. The m1803d5xa version( Global version) works well.
Click to expand...
Click to collapse
Could be possible. I got the m1803d5xa and it works well. Added it to my First Post
simonsmh said:
The model m1803d5xe version( known as 6GB ram black color version in China, have limited bands) probably has a limit on flashing root( magisk) in the Global rom. It will cause bootloop and currently have no solution. The m1803d5xa version( Global version) works well.
Click to expand...
Click to collapse
Oh yes yes, this maybe!!!! My model m1803d5xe
So if m1803d5xa works and m1803d5xe doesn't it's exactly the same problem as when flashing Magisk 16.4 with TWRP:
All devices with xe will bootloop. The only difference is, your variant without TWRP doesn't work on Chinese ROMs, only global. But flashing 16.4 on xa model and Chinese ROM works
underlines said:
So if m1803d5xa works and m1803d5xe doesn't it's exactly the same problem as when flashing Magisk 16.4 with TWRP:
All devices with xe will bootloop. The only difference is, your variant without TWRP doesn't work on Chinese ROMs, only global. But flashing 16.4 on xa model and Chinese ROM works
Click to expand...
Click to collapse
You can install Magisk on m1803d5xe with Chinese ROM. It works fine, but gpay don't works.
So basically magisk only works if you are running native rom for your phone model? What about 256gb version?
I am very confused about which method can be used on which model and ROM. I try to read again through the different threads.
I tried to come up with a matrix that shows all working and non working ways. Can anyone help me to correct and complete this please?
View attachment 4518265
underlines said:
I am very confused about which method can be used on which model and ROM. I try to read again through the different threads.
I tried to come up with a matrix that shows all working and non working ways. Can anyone help me to correct and complete this please?
Click to expand...
Click to collapse
I have a d5xa and it works with patched boot image. I'm on global rom
underlines said:
I am very confused about which method can be used on which model and ROM. I try to read again through the different threads.
I tried to come up with a matrix that shows all working and non working ways. Can anyone help me to correct and complete this please?
View attachment 4518265
Click to expand...
Click to collapse
I don't know if i can help, but i have the XE Model (chinese version).
I'm using the last Xiaomi.eu rom (8.5.17), it's rooted with Magisk 16,4 and 'ive installed TWRP from notsyncing. No problems so far.
If you need some screenshots, i'll post them.
XE model. Magisk work's fine if install via TWRP on developer, global, xiaomi.eu chinese rom.
Thanks for the tuto but it don't work, i'm in France with a global 9..5.4.0, the tuto was fine but when i did the fastboot, it wrote FAILED Flashing is not allowed in lock status. I unlock my phone but i have to wait the famous 360 hours. Do you think it's for that it don't work ?
Thanks again for the tuto
bazochien said:
Do you think it's for that it don't work ?
Click to expand...
Click to collapse
OP: "U still need to have unlocked Bootloader"
This is the answer to your question.
You need patience and wait the infamous 360 hours (so do I, sadly).
Can anyone upload a Magisk patched boot image for 10.0.1GM57AA? The model that I have is GM1900. When I try to patch it myself on Magisk, I get an error saying "process error"
Anyone able to help?
Heelixx said:
Anyone able to help?
Click to expand...
Click to collapse
Hi.
magisk-patched 4.14.117-perf+ with twrp: https://ufile.io/3ieksyfx
flash with fastboot flash boot 4.14.117-perf+.img
meltbanana said:
Hi.
magisk-patched 4.14.117-perf+ with twrp: https://ufile.io/3ieksyfx
flash with fastboot flash boot 4.14.117-perf+.img
Click to expand...
Click to collapse
Thanks a lot for uploading this! I managed to flash it and root my device but now the wifi isn't working. I cleared the cache with TWRP but that didn't resolve the issue. Flashing back the original boot image made the wifi work again.
Heelixx said:
Thanks a lot for uploading this! I managed to flash it and root my device but now the wifi isn't working. I cleared the cache with TWRP but that didn't resolve the issue. Flashing back the original boot image made the wifi work again.
Click to expand...
Click to collapse
ok, perhaps it depends on BA (EU) or AA (global) ROM version? however you can boot the rooted one, install a downloaded version of magisk20 via magisk manager to patch your own kernel directly.
meltbanana said:
ok, perhaps it depends on BA (EU) or AA (global) ROM version? however you can boot the rooted one, install a downloaded version of magisk20 via magisk manager to patch your own kernel directly.
Click to expand...
Click to collapse
I flashed the 4.14.117-perf+.img that you uploaded and then I booted in TWRP and flashed my original stock boot image. While still in TWRP, I flashed the zip of Magisk and then I rebooted. That got it working. So I'm rooted now. Thanks for sending me the image. I appreciate it!
@Heelixx
Can you explain to me how important a magisk boot patched is? Did you leave Pie for 10? What's the procedure?
lvints said:
@Heelixx
Can you explain to me how important a magisk boot patched is? Did you leave Pie for 10? What's the procedure?
Click to expand...
Click to collapse
I was rooted on 10.0 and then I upgraded to 10.0.1
There is a procedure for upgrading to 10.0.1 and still keeping root. I wasn't aware of this and after I got the update, I restarted my device and ended up without root access.
A Magisk patched boot image is important for getting your device rooted.
If you're asking for the procedure to root your device, then you can follow this link which explains it, https://forum.xda-developers.com/oneplus-7/how-to/guide-how-to-flash-android-10-twrp-t3964131
1. Unlock Bootloader
Download official unlock tool here : https://en.miui.com/unlock/
2. Download the newest ROM and extract boot.img
Download the full ROM here: http://c.mi.com/oc/miuidownload/index
(ROM for Chinese model:http://www.miui.com/download-365.html)
3. Install Magisk Manager, the patch boot.img
Copy boot.img to the phone, then install magisk manager, click install, choose boot.img.
Then magisk_patch.img is generated. This is the root kernel.
Copy magisk_patch.img back to computer.
4. Flash root kernel.
Power off, then hold Vol Down + Power button ,enter fastboot mode.
open cmd, flash the root kernel.
fastboot flash boot magisk_patch.img
fastboot reboot
Lastest Fastboot Download: https://dl.google.com/android/repository/platform-tools-latest-windows.zip
changguangyu said:
1. Unlock Bootloader
Download official unlock tool here : https://en.miui.com/unlock/
2. Download the newest ROM and extract boot.img
Download the full ROM here: http://c.mi.com/oc/miuidownload/index
(ROM for Chinese model:http://www.miui.com/download-365.html)
3. Install Magisk Manager, the patch boot.img
Copy boot.img to the phone, then install magisk manager, click install, choose boot.img.
Then magisk_patch.img is generated. This is the root kernel.
Copy magisk_patch.img back to computer.
4. Flash root kernel.
Power off, then hold Vol Down + Power button ,enter fastboot mode.
open cmd, flash the root kernel.
fastboot flash boot magisk_patch.img
fastboot reboot
Lastest Fastboot Download: https://dl.google.com/android/repository/platform-tools-latest-windows.zip
Click to expand...
Click to collapse
u do know that there are no rom for mi10/pro in the first link (http://c.mi.com/oc/miuidownload/index)
-fluffy- said:
u do know that there are no rom for mi10/pro in the first link (http://c.mi.com/oc/miuidownload/index)
Click to expand...
Click to collapse
There will be ROM after international version of Mi 10 / Pro released.
For some reason I couldn't get fastboot working, I got VM ubuntu and got it done.
If any1 wants detailed instructions let me know.
EEA Rom Mi 10 /Mi 10 Pro
Last news
Mi 10 EEA
http://hugeota.d.miui.com/V11.0.9.0.QJBEUXM/miui_UMIEEAGlobal_V11.0.9.0.QJBEUXM_f40b8c154f_10.0.zip
http://bigota.d.miui.com/V11.0.9.0....EUXM_20200321.0000.00_10.0_eea_3060ffeca1.tgz
Mi 10 Pro EEA
http://bigota.d.miui.com/V11.0.7.0.QJAEUXM/miui_CMIEEAGlobal_V11.0.7.0.QJAEUXM_e5fb61d54d_10.0.zip
http://bigota.d.miui.com/V11.0.7.0....EUXM_20200321.0000.00_10.0_eea_6ec058d03b.tgz
ionutlup said:
Last news
Mi 10 Global EEA
http://hugeota.d.miui.com/V11.0.9.0.QJBEUXM/miui_UMIEEAGlobal_V11.0.9.0.QJBEUXM_f40b8c154f_10.0.zip
http://bigota.d.miui.com/V11.0.9.0....EUXM_20200321.0000.00_10.0_eea_3060ffeca1.tgz
Mi 10 Pro Global EEA
http://bigota.d.miui.com/V11.0.7.0.QJAEUXM/miui_CMIEEAGlobal_V11.0.7.0.QJAEUXM_e5fb61d54d_10.0.zip
http://bigota.d.miui.com/V11.0.7.0....EUXM_20200321.0000.00_10.0_eea_6ec058d03b.tgz
Click to expand...
Click to collapse
Where did you get links?
On the official page
https://c.mi.com/oc/miuidownload/detail?guide=2
No links about Mi 10 or Mi 10 Pro
Anyway "EEA" is different from "Global".
magisk_patched.img
changguangyu said:
1. Unlock Bootloader
Download official unlock tool here : https://en.miui.com/unlock/
2. Download the newest ROM and extract boot.img
Download the full ROM here: http://c.mi.com/oc/miuidownload/index
(ROM for Chinese model:http://www.miui.com/download-365.html)
3. Install Magisk Manager, the patch boot.img
Copy boot.img to the phone, then install magisk manager, click install, choose boot.img.
Then magisk_patch.img is generated. This is the root kernel.
Copy magisk_patch.img back to computer.
4. Flash root kernel.
Power off, then hold Vol Down + Power button ,enter fastboot mode.
open cmd, flash the root kernel.
fastboot flash boot magisk_patch.img
fastboot reboot
Hi, after Magisk install procedure, the resulting magisk_patched.img is much smoller then the origin boot.img (45692KB vs 131072KB). Magisk Manager 7.5.1 (267) was used. Is it OK? Thanks.
Click to expand...
Click to collapse
Yes correct. I didn't check file size to confirm the numbers you gave, but the file does indeed becomes smaller.
Happy rooting
It's possible flash magisk zip via twrp like good old days? ?
Rhaegar93 said:
It's possible flash magisk zip via twrp like good old days?
Click to expand...
Click to collapse
You can try, but it doesn't work.
Will this allow me to use the magisk to hide root/unlocking for my google pay, banking apps, netflix to work?
Rithina said:
Will this allow me to use the magisk to hide root/unlocking for my google pay, banking apps, netflix to work?
Click to expand...
Click to collapse
Yes. Netflix works either way
Hi friends, can you tell why if I try to unlock the bootloader via Mi Unlock app I get a message: "Please unlock 168 hours later"? (see attached screen).
http://www.itnovation.eu/koles/Mi-unlock.jpg
I have Mi account signed on the device and all is prepared properly (Developer Options ebabled, account assigned in Unlock status).
Why do I have to wait 7 days?
zencooler said:
Hi friends, can you tell why if I try to unlock the bootloader via Mi Unlock app I get a message: "Please unlock 168 hours later"? (see attached screen).
http://www.itnovation.eu/koles/Mi-unlock.jpg
I have Mi account signed on the device and all is prepared properly (Developer Options ebabled, account assigned in Unlock status).
Why do I have to wait 7 days?
Click to expand...
Click to collapse
Because we all had to wait 7 days to unlock bootloader. .....welcome to miui
gogoffm said:
Because we all had to wait 7 days to unlock bootloader. .....welcome to miui
Click to expand...
Click to collapse
OK. Sounds promising! Thank you very much for the info. I have been using Mi Mix phone few years ago and the unlocking process was working different way then [emoji106]
I have to be patient now...
Sent from my SM-N960F via Tapatalk
I am looking for the Xiaomi mi 10 Lite 5G Rom. Can somebody help me?
1625 said:
I am looking for the Xiaomi mi 10 Lite 5G Rom. Can somebody help me?
Click to expand...
Click to collapse
Hi,
the official version?
https://xiaomifirmwareupdater.com/firmware/
or the XIAOMI.EU?
MIUI 12
https://xiaomi.eu/community/threads/20-6-4.56112/
MIUI 11
https://xiaomi.eu/community/threads/miui-11-0-stable-release.52628/
:highfive:
Thanks for your help.
Im not sure, now I have 11.0.4.0(QJIEUXM), do I have to choose the file: xiaomi.eu_multi_MI10LiteZoom_V11.0.10.0.QJVCNXM_v11-10.zip ?
I can’t find something beginning with QJI
Magisk 20.4 okay?
Can anyone help please?
1. I flashed EU MIUI 12 on a china Mi 10 Pro, should I use the boot.img from that rom?
2. I copied the boot.img file (from MIUI12 EU) to downloads. Magisk doesn't see it, it sees other files there though.
---------- Post added at 02:35 PM ---------- Previous post was at 02:09 PM ----------
Update, I rooted my Mi 10 Pro without this exact method.
My device is a China Mi 10 Pro 8/256.
1. I couldn't install the EU ROM from TWRP, so I installed the Chinese TWRP specifically for the Mi 10 Pro.
2. Inside that version of TWRP, there is a button to root the device. So I did and then flashing the EU ROM succeeded.
3. I installed Magisk 7.5.1 APK , it seems I'm not rooted. Tried root checker, no go too.
4. Now I wanted to root, so I tried this method , but for some reason Magisk (7.5.1) couldn't see my boot.img file.
5. I uninstalled Magisk (7.5.1)
6. I flashed Magisk ver 20.4 from TWRP. Cool, but couldn't see it.
7. I installed the Magisk 7.5.1 APK , and now it appears I'm rooted.
8. Tried root checker, Magisk popped and I granted acceess, root is OK!
I have successfully unlocked my bootloader with the Xiaomi Unlock tool. I am new here and I want to know how I can root my Poco X3 Pro (I have 8GB 256GB Global Variant)? Can someone share the working TWRP and Magisk? I just want to root my phone if someone has any working version of Magisk to flash from Fastboot mode it will be enough.
You don't need flash TWRP to install magisk. You have to download the firmware you are using and copy the boot.img to the internal storage. Then install the latest version of the magisk app and select "patch boot.img" as the installation method. The generated file must be flashed by fastboot ("fastboot flash boot boot.img"). Congrats! You're root.
Alkalinorap said:
You don't need flash TWRP to install magisk. You have to download the firmware you are using and copy the boot.img to the internal storage. Then install the latest version of the magisk app and select "patch boot.img" as the installation method. The generated file must be flashed by fastboot ("fastboot flash boot boot.img"). Congrats! You're root.
Click to expand...
Click to collapse
While searching on google to download the firmware I found 2 versions:
1. Fastboot version of the ROM
2. Recovery version of the ROM
To patch the boot.img which version I will need?
poco x3 pro said:
While searching on google to download the firmware I found 2 versions:
1. Fastboot version of the ROM
2. Recovery version of the ROM
To patch the boot.img which version I will need?
Click to expand...
Click to collapse
Fastboot version.
poco x3 pro said:
While searching on google to download the firmware I found 2 versions:
1. Fastboot version of the ROM
2. Recovery version of the ROM
To patch the boot.img which version I will need?
Click to expand...
Click to collapse
Could you provide a link to the firmware you found?
urbanman2004 said:
Could you provide a link to the firmware you found?
Click to expand...
Click to collapse
Click here to Download It's MIUI Global 12.0.4.0 (RJUMIXM)
In case you need Boot.img (Extracted from above ROM link)
poco x3 pro said:
Click here to Download It's MIUI Global 12.0.4.0 (RJUMIXM)
In case you need Boot.img (Extracted from above ROM link)
Click to expand...
Click to collapse
Do you know if there's a link available for the EU version
urbanman2004 said:
Do you know if there's a link available for the EU version
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=2188818919693771981
poco x3 pro said:
https://androidfilehost.com/?fid=2188818919693771981
Click to expand...
Click to collapse
I just made an account to remind: This is the Xiaomi.eu rom based on the chinese version
It is not the stock rom officially for the EU, the name of that would be "RJUEUXM"
I believe this is important, in case one wants to lock the bootloader again. From what I have read, unlocking a bootloader of a global/EU based Phone and downloading a chinese based rom and locking the bootloader will brick the phone. At least that's what I've read
Bootloader unlocked required???
ralok089 said:
Bootloader unlocked required???
Click to expand...
Click to collapse
ofcourse
Hello,
I'm stuck with rooting... I had:
-unlocked bootloader after 168 hours.
-downloaded the fastboot rom of 12.0.4.0(RJUEUXM)
-extracted boot.img
Magisk app:
Magisk
Installed N/A A/B No
Ramdisk Yes SAR Yes
App
Latest 22.1 (22100) (20)
Installed 22.1 (22100)
Package com.topjohnwu.magisk
When I select install, there is 1 method only: "Select and Patch a file"
I select the extracted "boot.img" from the phone storage, "LET'S GO" --->>
- Device platform: arm-v8a
- Installing: 22.1 (22100)
! Unable to extract files
! Installation failed
Could you help me?
lulzor said:
Hello,
I'm stuck with rooting... I had:
-unlocked bootloader after 168 hours.
-downloaded the fastboot rom of 12.0.4.0(RJUEUXM)
-extracted boot.img
Magisk app:
Magisk
Installed N/A A/B No
Ramdisk Yes SAR Yes
App
Latest 22.1 (22100) (20)
Installed 22.1 (22100)
Package com.topjohnwu.magisk
When I select install, there is 1 method only: "Select and Patch a file"
I select the extracted "boot.img" from the phone storage, "LET'S GO" --->>
- Device platform: arm-v8a
- Installing: 22.1 (22100)
! Unable to extract files
! Installation failed
Could you help me?
Click to expand...
Click to collapse
Upload and send me boot.img by pm, I'm going to try patch it to know if it is a problem with your magisk or the file.
it seems that Magisk 22.1 was the problem, uninstalled, and installed v22.0. This version was able to do its job.
lulzor said:
it seems that Magisk 22.1 was the problem, uninstalled, and installed v22.0. This version was able to do its job.
Click to expand...
Click to collapse
I can do it with 22.1, I think something strange happened with your phone.
Do we have to patch vbmeta also??
Has anybody had any luck flashing the EU 12.0.5.0 (RJUEUXM)? My bootloader is unlocked and I put my device in fastboot mode, extracted all the files in archived in the rom into my adb folder (which contains the adb repositories) and double-clicked "flash_all.bat" and let the process complete. However, my device does a constant boot loop of the POC splash screen. I thought what I did would be sufficient, or would I need to use the Mi Flash tool to proceed w/ this process instead?
i m waiting for the 6/128 variant. do i need a different firmware from the aforementioned one?
nikapos said:
i m waiting for the 6/128 variant. do i need a different firmware from the aforementioned one?
Click to expand...
Click to collapse
I don't think so
will i be receiving formal OTA updates if i just root the phone? (no custom rom, no custom recovery)
tried searching, but didnt find something relevant in this thread.