Database Info

[Q] Xoom won't boot

So I'm trying to fix a Xoom for a client. Her nephew was using it over Thanksgiving weekend and has managed to mess it up.
1) On a normal boot it never gets past the boot animation. The animation just loops and loops.
2) I was able to get into recovery and do a factory reset, but that didn't improve anything.
3) I can get to "Starting Fastboot protocol support" or "Starting RSD protocol support 0"
4) I have used two different moto drivers on Win 7 and Win 8, but neither computer ever recognizes the xoom is connected regardless of mode
5) Adb never sees the xoom either.
6) This device should have been completely stock, but no one knows what this kid did with this tablet.
7) USB debugging was probably off since the owner would not have known about it or had a reason to turn it on.
What are my options here? I'm thinking that I need to flash a good factory image, but I need to get some communication going first.
Update: I've been trying different cables. I found one where the computers will see that a devices is connected, but am getting "USB device not recognized" with either set of drivers that I have on both computers. Making progress, but could still use some help.

DiGi760 said:
So I'm trying to fix a Xoom for a client. Her nephew was using it over Thanksgiving weekend and has managed to mess it up.
1) On a normal boot it never gets past the boot animation. The animation just loops and loops.
2) I was able to get into recovery and do a factory reset, but that didn't improve anything.
3) I can get to "Starting Fastboot protocol support" or "Starting RSD protocol support 0"
4) I have used two different moto drivers on Win 7 and Win 8, but neither computer ever recognizes the xoom is connected regardless of mode
5) Adb never sees the xoom either.
6) This device should have been completely stock, but no one knows what this kid did with this tablet.
7) USB debugging was probably off since the owner would not have known about it or had a reason to turn it on.
What are my options here? I'm thinking that I need to flash a good factory image, but I need to get some communication going first.
Click to expand...
Click to collapse
I had a problem similar to that about a year ago, somewhere in these forums was the suggestion to remove the SD card and then do a factory reset, it worked for me. My xoom just stopped working, I thought at first it was a flat battery but after charging the symptoms were the same as yours, might be worth searching through the forums if you haven't already

There's no sd card in it, just the little plastic place holder. I've been looking all over the forums, but I normally deal with Samsungs. I've been figuring out Motorola's little quirks as I go along. Is there a recommended moto driver for these things?

DiGi760 said:
There's no sd card in it, just the little plastic place holder. I've been looking all over the forums, but I normally deal with Samsungs. I've been figuring out Motorola's little quirks as I go along. Is there a recommended moto driver for these things?
Click to expand...
Click to collapse
Sorry can't help , mine is just over 2 years old and except for that one problem have never had any issues so have never needed to even connect it to a PC

DiGi760 said:
There's no sd card in it, just the little plastic place holder. I've been looking all over the forums, but I normally deal with Samsungs. I've been figuring out Motorola's little quirks as I go along. Is there a recommended moto driver for these things?
Click to expand...
Click to collapse
I recently discovered these handy files when I needed to return to stock:
4G Xoom (MZ600) Restore
3G Xoom (MZ601/3) Restore
WiFi Xoom (MZ604) Restore
If you need to find out which Xoom model it is, power on whilst holding the volume down button, this will take you in to fastboot. Then (you sound like you'd know how do this, PM me if you don't) use "fastboot getvar all". This will return the model.
Unzip the file above, there's a batch file in there which will install the drivers, then fastboot the firmware over.
If you boot to fastboot, then run the batch file, it installs the drivers, then "adb device", then it asks if your device is connected - it won't show up cos it's in fastboot. Just ignore that and say yes, and it'll start flashing the files.
Sorry if I'm too late - don't visit these boards much these days. Good luck, let me know if this works.

Thanks for giving me something to try. I uninstalled the moto drivers I had and installed the ones included in the zip file and restarted my computers. The Windows 8 computer never recognizes that the xoom is connected in any mode. The 7 machine does see it in fastboot mode but as a "fastboot" device for which it fails to find drivers. When I run fastboot getvar all, all I get is <waiting for device>.
I do know that this is a wifi only (mz604) xoom. Thanks for the image files. If I can get this stupid thing to communicate with a computer, I think I'll be in business.

In fastboot mode (vol -) it won't acknowledge that it's connected. Just fastboot your image over and it will work.

If I try to do anything with fastboot, it just says "< waiting for device >". Fastboot doesn't see a device to flash to.

OK, it's either your cable or your driver. Many cables are for charging only, and have no data lines. I throw those away.
As to drivers, I'm Debian for 15 years so can't advise on Winduhs.
Oh, one more thing: I've noticed that on my old HP laptop I had to use a certain USB port, or else it wouldn't comm with my phone for fundamental actions like loading new firmware.

These were the drivers I used: https://motorola-global-portal.cust...sion/L3RpbWUvMTM4NjM1MjA0NC9zaWQvWEo3SWU5SGw=
They don't seem to be windows 8 certified though.
Sent from my Nexus 5 using Tapatalk

We finally got it. We used DriverEasy to look for drivers because we have a bunch of extra licenses and the drivers we had obviously weren't working. DriverEasy was able to install an "Android Bootloader" driver that must not be part of the SDK. Once that was installed, I was able to use fastboot to flash the images from above. The device is in good working order again and fully updated.
Thanks for all your help.

Always nice to hit the Thanks button for those who've helped.

[Q] LG-P506 Fastboot Can See My Device But Won't Show The Serial Number

So I have a LG p506 and I recently installed cyanogen-mod 10.1 on it. I had to use the November release as the newest one wouldn't load past the cyanogen logo(i let it run for a couple hours). Everything seemed to work great after that. So I put the phone in my backpack for a later date.
When i finally pull it back out the battery was completely dead, and plugging the phone into usb would not charge it. I used an external device to charge it.
Basically the only thing the phone can do now is load the lg logo, go into emergency mode, and fastboot. I can erase and flash images, I have tried system boot and recovery multiple times with different files.
However I get the same two things every time i try something:
1. when I plug the phone into usb, the phone will do its thing then give a STALL GET_DESCRIPTOR error
2. fastboot devices shows something but I get a "?" where the serial number should be.
I am not proficient enough with fastboot to try other commands. Any one have some advice?
Also, I've tried every usb port I have, theres only one that works with the phone. One of the usb ports shows up normally on the phone but fastboot won't show any devices. I am running windows 7 ultimate x64.
The one thing i haven't tried is reinstalling windows 8 on one of my hdd's and seeing if it isn't a win7 issue. Ive used it with win 8 before and it didn't give the error message.

baked cake said:
So I have a LG p506 and I recently installed cyanogen-mod 10.1 on it. I had to use the November release as the newest one wouldn't load past the cyanogen logo(i let it run for a couple hours). Everything seemed to work great after that. So I put the phone in my backpack for a later date.
When i finally pull it back out the battery was completely dead, and plugging the phone into usb would not charge it. I used an external device to charge it.
Basically the only thing the phone can do now is load the lg logo, go into emergency mode, and fastboot. I can erase and flash images, I have tried system boot and recovery multiple times with different files.
However I get the same two things every time i try something:
1. when I plug the phone into usb, the phone will do its thing then give a STALL GET_DESCRIPTOR error
2. fastboot devices shows something but I get a "?" where the serial number should be.
I am not proficient enough with fastboot to try other commands. Any one have some advice?
Also, I've tried every usb port I have, theres only one that works with the phone. One of the usb ports shows up normally on the phone but fastboot won't show any devices. I am running windows 7 ultimate x64.
The one thing i haven't tried is reinstalling windows 8 on one of my hdd's and seeing if it isn't a win7 issue. Ive used it with win 8 before and it didn't give the error message.
Click to expand...
Click to collapse
fastboot doesn't show a serial number for that device. At least never has for me. If 'fastboot devices' lists something like
Code:
List of devices attached
???????? fastboot
then you're good to go.

damn that was my only thing to go on lol. nothing will get this phone to boot into recovery. im about to get a sd card reader for my pc to test and see if its bad.

baked cake said:
damn that was my only thing to go on lol. nothing will get this phone to boot into recovery. im about to get a sd card reader for my pc to test and see if its bad.
Click to expand...
Click to collapse
You can use fastboot to flash another recovery. Rashed should have a link in the OP for the 4.1.2 ROM you said you were using. You can continue to use the command-line if you like, but I did write a Windows app for flashing recoveries. Links in my signature.

shinobisoft said:
You can use fastboot to flash another recovery. Rashed should have a link in the OP for the 4.1.2 ROM you said you were using. You can continue to use the command-line if you like, but I did write a Windows app for flashing recoveries. Links in my signature.
Click to expand...
Click to collapse
ill give it a try, but i have tried just about every recovery file i can get my hands on and no luck, also looks like winds 8 doesn't want to acknowledge my phones existence. I downloaded and installed the driver from LG but still no luck, windows 8 is giving me a failed descriptor error as well.

ok so i have been stumbling around for a bit and noticed something possible wrong.
Windows 7 device manager shows my device, installed correctly, but listed as USB Modem Phone ADB Port.
Shouldn't this be a fastboot port? Since ADB is only available via the android operating system, and i can't get into my operating system, all i have is fastboot.
I have ran thru quite a few fast boot recovery pages, and I don't know what im missing here.

baked cake said:
ok so i have been stumbling around for a bit and noticed something possible wrong.
Windows 7 device manager shows my device, installed correctly, but listed as USB Modem Phone ADB Port.
Shouldn't this be a fastboot port? Since ADB is only available via the android operating system, and i can't get into my operating system, all i have is fastboot.
I have ran thru quite a few fast boot recovery pages, and I don't know what im missing here.
Click to expand...
Click to collapse
I'd say that was/is the correct port name. I don't have that device anymore so I cannot say for sure.
Sent from my LG-P769 using Tapatalk

ok, so this is a follow up on some things i have tried recently.
Since my last post i have:
1. put the sdcard into my tablet, and formatted it/ ran an error scan on it via windows.
2. i then flashed a recovery file via my phones fastboot, i pulled that card put it back in tablet to see what files it installed.
3. according to windows, flash recovery installed a .LOST folder with nothing in it, which is the same thing my tablet has on its internal memory, so i don't think there's anything wrong there.
4. phone still cant boot past LG logo(or recovery), or charge the battery when plugged in.
5. I still get a stall get_descriptor error when connected via usb, and commands such as fastboot reboot don't work, tho the phone will say its rebooting (it says its rebooting then just sits there and does nothing, command prompt will say action completed).
6. one thing i have tried as well, is telling windows not to automatically install drivers, then uninstalling my phone from device manager.
Whats interesting about this was that windows was installing its own ADB modem driver from it's own library every time i plugged in the phone. After disabling auto drivers, and reinstalling my LG drivers, the phone simply remains an unknown device.
Some things I have tried include pointing windows to the driver folder, both the downloaded folder and the folder windows installed it to. Neither worked.
The next thing I tried is the have disc option on both. Although there are setup information files in the install folder (about 50 of em), pointing the phone to each file one at a time did not work.
What did work, interesting enough was pointing the phone to a set of Naked Drivers I downloaded, although none of those drivers are specifically for my phone, and they only gave me the same problem I had when i had windows auto installing its own driver.

LG L5 612 - fastboot issue
Hi,
I have an LG L5 612.
I'm trying to perform below actions, but always get "waiting for device" ... and nothing happens.
fastboot reboot-bootloader
fastboot flash boot boot.img
"adb devices" lists my device correctly, while "fastboot devices" output nothing.
C:\ADB>adb devices
List of devices attached
LGOTMS840b676a device
C:\ADB>fastboot devices
C:\ADB>
C:\ADB>fastboot reboot-bootloader
< waiting for device >

Phone unrecognized in download/recovery

So Ive just bought a brand new U12+, and obviously the very first thing I did was attempt to root it.
Main hiccup Im running into here is that my PC wont recognize the phone while its in recovery or fastboot/download mode.
If I had to guess, I think it's a driver issue, problem is I've been searching for hours now and cannot find the proper drivers for it to be recognized. (I've also tried every USB port on my PC, both 2.0 and 3.0.)
Ive tried using HTC sync, uninstalling it and leaving that driver, Ive tried letting windows auto install the driver, and I tried a generic android USB driver, none of which have seemed to work.
PC will recognize the phone while it's fully booted to OS, and I can even command it to reboot into recovery from there, but once its in recovery I lose connection.
Not sure how much of a difference this makes, but I bought a factory unlocked phone, still sealed, with all the plastic and accessories inside the box. But when I boot into download I get the message "Security checking failed DENY", this is only supposed to show up after the bootloader has been unlocked isn't it?
Anyways, if someone could point me in the right direction for these drivers it'd be greatly appreciated.

chaosrde said:
So Ive just bought a brand new U12+, and obviously the very first thing I did was attempt to root it.
Main hiccup Im running into here is that my PC wont recognize the phone while its in recovery or fastboot/download mode.
If I had to guess, I think it's a driver issue, problem is I've been searching for hours now and cannot find the proper drivers for it to be recognized. (I've also tried every USB port on my PC, both 2.0 and 3.0.)
Ive tried using HTC sync, uninstalling it and leaving that driver, Ive tried letting windows auto install the driver, and I tried a generic android USB driver, none of which have seemed to work.
PC will recognize the phone while it's fully booted to OS, and I can even command it to reboot into recovery from there, but once its in recovery I lose connection.
Not sure how much of a difference this makes, but I bought a factory unlocked phone, still sealed, with all the plastic and accessories inside the box. But when I boot into download I get the message "Security checking failed DENY", this is only supposed to show up after the bootloader has been unlocked isn't it?
Anyways, if someone could point me in the right direction for these drivers it'd be greatly appreciated.
Click to expand...
Click to collapse
Strange suggestion but try a different pc. My phone isnt recognised when I try to install magisk on my phone on my home pc but it works on my work pc.
I got about 9 different USB ports on my home PC and none work
Also download platform-tools_r29.0.2-windows for fastboot etc.

While you're in troubleshooting mode, try another USB cable. I had issues running fastboot commands and the like when using a generic USB cable, but it worked fine using an OEM one. Can't hurt to rule that out too.

Icculus760 said:
While you're in troubleshooting mode, try another USB cable. I had issues running fastboot commands and the like when using a generic USB cable, but it worked fine using an OEM one. Can't hurt to rule that out too.
Click to expand...
Click to collapse
I am using the OEM cable, straight out the box. I'm gonna try meddling with it again when I get home and see if I can get it working.

bigAL99 said:
Also download platform-tools_r29.0.2-windows for fastboot etc.
Click to expand...
Click to collapse
Ive done a fair bit of searching but I can't find anywhere to download older version of platform tools, I have the current build 29.0.5.

Botched Graphene install on Pixel 3A - need help restoring default settings

Hello,
I am hoping for some advice on how to revert my phone back to its original "factory settings" after a botched instal of GrapheneOS onto an unlocked Google Pixel 3A.
I got to the point at which I needed to Flash the Graphene Rom to the phone, but rather than installing, I received a message from Smart Screen MS edge asking if I really wanted to run as it's protecting my PC - I clicked run anyway and a blank command line window appeared for a second. Now my pc doesn't seem to be recognising the pixel 3A when I type ADB devices. My phone is currently in Fastboot mode "unlocked" and I'm hoping for some advice on what to do next. I'm total noob, so unsure how to start the process over (return the phone to it's previous state) before, maybe, trying again on a different PC.
I have since turned on my phone and Android 11 is still present and seems to work fine (however it gives me a warning on startup that the bootloader is unlocked.
Any help would be very much appreciated - thank you in advance.

Is all what happened that your phone now:
complains about "'maybe not safe bootloader unlocked".
This is just what android does when the bootloader is unlocked.
This you did before trying the flash.
If you want the warning gone simply lock it again.
However if you into the market for graphene OS then I would recomend: along with following their guide to a t to also read up here on xda about the general rooting unlocking thing a bit more so you get the overall process a bit better perhaps next time.
About windows. There are so many tools out there to help ya with disabling some of it's spying, turning off smartscreen, auto - uploads of all your data to M$oft, etc etc.
It's not hard to find.

Thanks for the response - I think I've worked out what is going on.
Typing ADB devices, my PC recognises the phone until I put it into fastboot mode - typing adb devices when in fastboot comes back with nothing and therefore when I try to flash, I assume the devices aren't talking to each other.
Not sure if there's a work around or whether it's a case of finding a new PC to try it on?
Thanks again.

Ignore

deroller said:
Thanks for the response - I think I've worked out what is going on.
Typing ADB devices, my PC recognises the phone until I put it into fastboot mode - typing adb devices when in fastboot comes back with nothing and therefore when I try to flash, I assume the devices aren't talking to each other.
Not sure if there's a work around or whether it's a case of finding a new PC to try it on?
Thanks again.
Click to expand...
Click to collapse
try another USB port first; use USB 2.0 if available! Reinstall google ADB drivers, make sure to use latest!
If above will not help:
on your computer: open device manager; on your phone: put your phone into fastboot; connect your phone to the computer WHILE keeping an eye on device manager; as soon as you'll connect your phone new device will appear in device manager ("unknown device" most likely but it might be some "android device" or "ADB device" too); right click it —> update driver —> automatic driver update worked in most cases for me, if not, go manual way and select google's "android fastboot device" (or something like that, can't remember actual name of the device); after driver install confirmation you should be good to go

Tamsta_T said:
try another USB port first; use USB 2.0 if available! Reinstall google ADB drivers, make sure to use latest!
If above will not help:
on your computer: open device manager; on your phone: put your phone into fastboot; connect your phone to the computer WHILE keeping an eye on device manager; as soon as you'll connect your phone new device will appear in device manager ("unknown device" most likely but it might be some "android device" or "ADB device" too); right click it —> update driver —> automatic driver update worked in most cases for me, if not, go manual way and select google's "android fastboot device" (or something like that, can't remember actual name of the device); after driver install confirmation you should be good to go
Click to expand...
Click to collapse
Hey there,
This is brilliant - thanks for all the advice. Having this support is helping me gain the confidence to learn more, research more, and then give it a go.
All the best.

deroller said:
Thanks for the response - I think I've worked out what is going on.
Typing ADB devices, my PC recognises the phone until I put it into fastboot mode - typing adb devices when in fastboot comes back with nothing and therefore when I try to flash, I assume the devices aren't talking to each other.
Not sure if there's a work around or whether it's a case of finding a new PC to try it on?
Thanks again.
Click to expand...
Click to collapse
thats if I am not wrongly remembering my experience:
because now your phone is in fastboot mode thus it won't show up with that command anymore.
Try: 'fastboot devices'
I imagine you put it into fastboot through: 'reboot fastboot' when you where in adb?
When in fastboot you can go on and flash the recovery and such.
Are you still in need of help here?

Hey, thanks for the clarification - been away and so haven't implemented all suggestions, yet.
I typed "adb reboot booloader" which I assumed put it into fastboot mode and then unlocked it using "fastboot flashing unlock".
I tried fastboot devices but the PC still doesn't see the phone. I'm going to try the update usb driver suggested by Tamsta_T and see how it goes.
Thanks for your help.

Fastboot waiting for any device

Hello everybody, I was trying to update my Magisk and that process failed. I thought nothing of it put it off. Tried to restart my phone a few days later and now it's stuck in a fastboot loop. Cannot even go into recovery. So I'm like okay, probably need to reinstall recovery and flash a clean rom again. Try the "fastboot boot recovery.img" command and it's giving me a "waiting for any device". Googling says it's a driver error, but that's strange because I have used my phone on this computer before with ADB and fastboot. Fastboot and ADB commands work fine on my Oneplus 3T.

A week ago I also had the problems after the Magisk update. But connecting to the PC worked normally for me. Once you've installed the drivers, there shouldn't be any problems. You could use a different cable.
Incidentally, Magisk only messed up the boot image. It is sufficient if you flash your boot.img, then the twrp.zip, reboot into recovery, then the magisk.zip.
That was completely enough for me. Cell phone works normally again, without data loss.
Good luck!

Yeah that's exactly what I am trying to do, I can't even flash the boot.img to get into recovery, my computer won't recognize the device for some reason now. Do you know where I can find the drivers? I could only find shady 3rd party sites. Thanks!

Tried installing drivers from here, no change.
Download Latest OnePlus USB Drivers for Windows and Mac
Download The Latest OnePlus USB Drivers For All OnePlus Android Smartphones. We Have Included USB drivers for Both Windows And Apple MAC OS Users. Download Links Given Below.
www.getdroidtips.com

This is installed and works with me

ghost323 said:
This is installed and works with me
Click to expand...
Click to collapse
No joy, looks like that's the same file as the one I downloaded. Thanks for your help anyways.

Now I can't even turn my phone off lol. It woke itself up this morning magically and now whenever I hit power off in fastboot it just boots up again into fastboot. Might have to send it in...the horror

Your phone is crying out for help. It doesn't like to die.
I think you will have tried everything possible. Have you already connected it to another computer with the right drivers? Tried other cables?

ghost323 said:
Your phone is crying out for help. It doesn't like to die.
I think you will have tried everything possible. Have you already connected it to another computer with the right drivers? Tried other cables?
Click to expand...
Click to collapse
Haha yeah, it's like your kid who refuses to go to bed and is throwing a tantrum. Yeah two different computers that are known to have worked with this phone in the past (how I unlocked the bootloader in the first place). Different ports, different cables. It seems like I'm having the same issue that a lot of other people are having with the last Magisk update, except they're able to flash the recovery image in fastboot to get back running.

This is a ****ty situation! That was really a nasty magisk update. I wonder why its consequences are so different, even though it is the same cell phone.

fastboot cannot recognize device but adb can
usb debugging is enabled on device. running latest version of adb, fastboot. Have tried on both mac and win10 but same issue on both. Oneplus 7 pro is running 10.3.0GM21AA >fastboot devices >adb devices List of devices attached 966c8016...
forum.xda-developers.com
Look at this. Maybe it will help you so that your computer recognizes the cell phone again.