Related
So I'm trying to get Viper4Android running on my MTCE_WWW Android 8.0 headunit running the stock ROM. I've rooted the system via the adb "injection" method (SuperSU). Root access seems to work fine for everything I've tried.
So then I downloaded the Viper4Andrid files (Viper4Android_FX_v2505.zip) and installed the "Nougat_IO_test_fix.apk" version of the app. I run the app and tell it to load/update the Viper driver - it takes about 30 seconds and says that the driver was installed successfully and tells me to reboot. I reboot the device and try to run Viper4Android, but it goes back to the driver update/install prompt. The actual driver install doesn't seem to be working (even though it says it loaded successfully).
Any idea what I'm doing wrong here?
Thank you in advance!
Ok, I finally got Viper4Andorid working on my MTCE Android 8.0 head-unit... I ended up having to do everything manually (manually editing audio_effects.conf, manually putting the lib4a_fx_ics.so driver file into the proper directory, etc). Since there is no custom recovery available for these MTC? Android head-units, I couldn't just flash any of the flashable V4A .zip files I found online - so I basically did everything a flash would do - just did it manually via a file explorer.
Let me go back and figure out the *exact* steps that I took and then I'll come back here and make sure to document the exact steps I did - may help someone else in the future...
I do realize that I could have just installed one of the custom ROMs that have V4A built in, but they seem to run a lot hotter than stock (from what I've read) and I would rather only install mods that I acutally want to use - instead of installing a bunch of stuff that I will never use and will just make the system run hotter.
So far, from my VERY brief testing, V4A seems to work very well though.
Hello mate, where i can found the steps did you use?
Android 10 QP1
2019-09-07
Bugs: VoLTE, Bluetooth and Cast doesn't work, SystemUI can crash
Features: All Android 10 Final Features
How to Install
1 : Download ROM and flash.
2 : When you boot, install Google Play Services and Google Play Store APK's
3 : When Google Play and Google Play Services is installed, reboot two or three time to have more stability
4 : Profits !
Note: If you want to change Kernel flash Permissiver_v4 and FixZygote_v2 after flashing your Custom Kernel
Downloads
ROM Download
Recommended Recovery (PBRP)
Permissiver_v4 from erfanoabdi
FixZygote_v2 from erfanoabdi
Google Camera configs
F.A.Q.
Q1: I don't have data services
A1: Try different Kernel. If doesn't work, go to stable Pie rom.
Q2: How to add gcam configs xml file
A2: Follow this guide
Q3: Battery drain issues ?
A3: No, it depend kernel you use
Thanks to @erfanoabdi for GSI and @MactavishAO for LagFix
ChangeLog
Android 10 Final 2019-09-07
• Android 10 DP6 20190904 Erfan GSI
• Switch to KangarooX r5.1 OC
very Good
thank you
How to install via Google play services adb command
wich camera app do you use? I tried install Mi Camera but it isn't compatible with Android Q yet. Gcam doesn't work for me either
I get
There's an internal problem with your device. Contact your manufacturer for details
Click to expand...
Click to collapse
I also don't have data service with it turned on and showing that I am connected to LTE.
John Amin said:
How to install via Google play services adb command
Click to expand...
Click to collapse
I would just rename the apk to playservices.apk then run this command. You just have to be booted into the system, not recovery. I just run adb devices in order to prompt authorization.
Code:
adb install playservices.apk
.
daggorlad said:
I would just rename the apk to playservices.apk then run this command. You just have to be booted into the system, not recovery. I just run adb devices in order to prompt authorization.
Code:
adb install playservices.apk
Click to expand...
Click to collapse
Ok,thanks but am facing another issue
Tried camera and not working and tried another version also force closes
And flashlight not working also
The rom work very fine, i hope you will release new Android Q Developer Preview,thanks for your effort
Thanks for this ROM
Regarding VoLTE
What happens when you try *#*#4636#*#* code ? Can You move the switches ?
Since Android 10 have the new "Scoped Storage" Feature, I wanted to know if File Explorers and SD-Cards still works like in previous Android versions? Since that is important for me, cause I need access to my own phone storage like always.
Waiting for stable version
I'm looking forward to try the Rom, that's the first thing I do when I'm able to unlock my Bootloader in 3 days exactly. Just can someone write a short review if the Rom is Stable enough except the few minor issues mentioned in the first post? And is Magisk 19.3 working in this Rom? And which recovery is recommended, Orangefox or Offical TWRP?
Have battery drain issue?
Smooth or butter?
So a short review of me after using the Rom a few days: I'm very impressed how well it works on our Redmi Note 5, I use the 4/64GB Global version, and I faced 2 bugs that wasn't mentioned here, first often when I lock the phone and wanna unlock it again, it just freezes and become unresponsive so I was forced to do a force reboot and Whatsapp voice messages doesn't work. But luckily, I honestly don't know why, both problems got fixed with installing the latest Updated PureCAF Kernel x6, overall Android 10 performance is very good and now it's stable too.
Why is this thread so quite?
xell75 said:
So a short review of me after using the Rom a few days: I'm very impressed how well it works on our Redmi Note 5, I use the 4/64GB Global version, and I faced 2 bugs that wasn't mentioned here, first often when I lock the phone and wanna unlock it again, it just freezes and become unresponsive so I was forced to do a force reboot and Whatsapp voice messages doesn't work. But luckily, I honestly don't know why, both problems got fixed with installing the latest Updated PureCAF Kernel x6, overall Android 10 performance is very good and now it's stable too.
Click to expand...
Click to collapse
Tnx for review, overall Android 10 performance is very good and now it's stable! these words are enough to try this rom. Next week I'll. Tnx to all developers
vijaymk said:
Tnx for review, overall Android 10 performance is very good and now it's stable! these words are enough to try this rom. Next week I'll. Tnx to all developers
Click to expand...
Click to collapse
No problem, btw. When you want your microphone to work in every app including Whatsapp, the fix is to just turn off Googles Voice Match if it's enabled, since it seems that it Blocks the microphone completely.
6- https://otafsg1.h2os.com/patch/amaz...22_OTA_061_all_1911200429_a3efe64891d2c42.zip
6T- https://otafsg1.h2os.com/patch/amaz..._41_OTA_061_all_1911200419_f2e12518eef8ae.zip
Found this today. File has a date of 11/20/19. I put in root and do manual update thru settings/update.
{Mod edit: THREAD CLOSED as duplicate of https://forum.xda-developers.com/oneplus-6t/how-to/oneplus-6t-beta-2-android-10-oxygenos-t4012119!}
shatty said:
6- https://otafsg1.h2os.com/patch/amaz...22_OTA_061_all_1911200429_a3efe64891d2c42.zip
6T- https://otafsg1.h2os.com/patch/amaz..._41_OTA_061_all_1911200419_f2e12518eef8ae.zip
Found this today. File has a date of 11/20/19. I put in root and do manual update thru settings/update.
Click to expand...
Click to collapse
I had a boatload of bugs with the OB1. I have a 6T converted. Couldnt answer or make calls, reboots, freezes, crashes, WIFI didnt work, no pic messages, etc. I just tested for a second and I could make calls and wifi works. Do not try to install the Magisk patched boot.img. It will give the problems I had with OB1. I tried.
I just did a dirty update now (from Beta1) via TWRP 3.3.1-14 (to be reflashed after flashing OOS10 B2) and then Magisk 20.1 as usual on both slots and everything runs perfectly well.
michelD said:
I just did a dirty update now (from Beta1) via TWRP 3.3.1-14 (to be reflashed after flashing OOS10 B2) and then Magisk 20.1 as usual on both slots and everything runs perfectly well.
Click to expand...
Click to collapse
Just did the same on my 6. Went from 10 stable to the beta2 (with xXx 9.4 on both) ... so far all seems good :good:
Did it wipe data?
foomanjackel said:
Just did the same on my 6. Went from 10 stable to the beta2 (with xXx 9.4 on both) ... so far all seems good :good:
Click to expand...
Click to collapse
Should I be concenred or just normal update
AOKPking said:
Should I be concenred or just normal update
Click to expand...
Click to collapse
Normal update. Stick the zip in ur root dir on phone and do local update thru settings, update
Can someone please confirm the 5ghz hotspot got fix or not?
THX
Is there a way to install TWRP without doing a boot image transplant on OB2?
open dialer app and enter *#801#
Set Serial and Full-port switch to ON
not working in beta 2 any more.
workaround =
adb shel
su
setprop sys.usb.config diag,serial_cdev,rmnet,adb
Anybody else see strange battery stats?
Seems that the charger unplugged event is not being recognised by GSAM (similar in many other). The % used gets updated but the time since unplugged does not.
BBS recognises it OK
Was the same in Beta 1
How to have all Google Play and its services ERROR-free running on our Mate 30 and Mate 30 Pro at a single touch (without Widevine certificate) and with ROOT.
(Netflix only works without certificates, as until now, BUT IT WORKS !!!)
http://www.vmos.com/
Download the APK, install and emulate android WITHOUT problems and with many possibilities ... you can even mess with Xposed !!!
By: Juankar.carrillo (LEON, SPAIN) [emoji2958]
Enviado desde mi Pixel 2 XL mediante Tapatalk
Did anyone try this ?
Yes
viruz1225 said:
Did anyone try this ?
Click to expand...
Click to collapse
Short and sweet... I used on the ZTE Axon 10 Pro
It is android 5.1 rooted running inside your phones operating system.
It works.
You can get to it from your own system and vice versa...
Kinda like running Linux inside of Windows, not dual boot...
Fun to play with, yet not really useful...
No, your actual android is not rooted!
You are relying upon that the app is safe and I have found no one yet to approve this function and the OS 5.1 is very very modified...
But that said: It did work as he said with limitations....I removed it! On my Huawei Mate 30, no way. Too nice of a phone!
I tried to run Bolt (formerly Taxify) on my Mate 30 Pro.
Although it take some time to load VMOS, the functionality I need is satisfactory ?
kreso75 said:
I tried to run Bolt (formerly Taxify) on my Mate 30 Pro.
Although it take some time to load VMOS, the functionality I need is satisfactory ?[/QUOTE
You don't need Vmos to run Bolt.
Click to expand...
Click to collapse
It does not work for me, except if I install "Shared directory error fix" from this thread.
However, when I install the fix, other app stopped working.
kreso75 said:
It does not work for me, except if I install "Shared directory error fix" from this thread.
However, when I install the fix, other app stopped working.
Click to expand...
Click to collapse
I know your issue. I can share with you my GMS apks:
http://s.go.ro/vsk9niug
In this combination 99.99% of aps works.
Do I have only to install those APK's or is there a special installation procedure (like run lmzplay or something similar)?
kreso75 said:
I tried to run Bolt (formerly Taxify) on my Mate 30 Pro.
Although it take some time to load VMOS, the functionality I need is satisfactory ?
Click to expand...
Click to collapse
I used this
kreso75 said:
Do I have only to install those APK's or is there a special installation procedure (like run lmzplay or something similar)?
Click to expand...
Click to collapse
I tried to install your app (Sparkasse...) and it is not working.
badmania98 said:
I tried to install your app (Sparkasse...) and it is not working.
Click to expand...
Click to collapse
Yes, the problem is with "4.SharedLibrary-com.apk.1mirror.gmapjar-1-v1.0.apk".
When I uninstall this (see attached screenshot), Sparkasse app works, but Bolt is automatically uninstalled.
When I try to install Bolt via adb, I'm getting the following:
Code:
adb install "ee.mtakso.client_CA.5.45-528_minAPI16(arm64-v8a,armeabi,armeabi-v7a,mips,x86,x86_64)(nodpi)_apkmirror.com.apk"
* daemon not running; starting now at tcp:5037
* daemon started successfully
adb: failed to install ee.mtakso.client_CA.5.45-528_minAPI16(arm64-v8a,armeabi,armeabi-v7a,mips,x86,x86_64)(nodpi)_apkmirror.com.apk: Failure [INSTALL_FAILED_MISSING_SHARED_LIBRARY: Reconciliation failed...: Reconcile failed: Package ee.mtakso.client requires unavailable shared library com.google.android.maps; failing!]
Hi,
New PH-1 owner here. Just got the phone new from Amazon. It was on 7.1.1. Immediately it upgraded to 9.0, and then to 10, build QQ1A-200105.32 with Feb. security updates. Impressive! After reading through some (a lot) of the material collected about the phone, I decided that at first I'd only root it (i.e. without installing TWRP) with Magisk. After getting familiar with the two rooting guide ("[GUIDE] Rooting your Essential PH-1" and "[Guide] How to Install TWRP & Root Essential PH-1(Method 2)") I actually followed this write up, and it :crying:FAILED.
I tried both ('PH1-Images-QQ1A.200105.032.zip', and 'PH1-OTA-QQ1A.200105.032.zip') Essential provided images and with both Magisk (v. 20.3 and MMgr. v. 7.5.1) failed with "Unsupported/Unknown image format"
So, that's the status, and I'll welcome any and all advise on the above, but in the meantime, a question:
1 - If I flash this ('4.4.166-stock-twrp-mgk181.img') image will I loose Android 10,or the ability to have later upgrades?
Thanks!
MarSOnEarth said:
Hi,
New PH-1 owner here. Just got the phone new from Amazon. It was on 7.1.1. Immediately it upgraded to 9.0, and then to 10, build QQ1A-200105.32 with Feb. security updates. Impressive! After reading through some (a lot) of the material collected about the phone, I decided that at first I'd only root it (i.e. without installing TWRP) with Magisk. After getting familiar with the two rooting guide ("[GUIDE] Rooting your Essential PH-1" and "[Guide] How to Install TWRP & Root Essential PH-1(Method 2)") I actually followed this write up, and it :crying:FAILED.
I tried both ('PH1-Images-QQ1A.200105.032.zip', and 'PH1-OTA-QQ1A.200105.032.zip') Essential provided images and with both Magisk (v. 20.3 and MMgr. v. 7.5.1) failed with "Unsupported/Unknown image format"
So, that's the status, and I'll welcome any and all advise on the above, but in the meantime, a question:
1 - If I flash this ('4.4.166-stock-twrp-mgk181.img') image will I loose Android 10,or the ability to have later upgrades?
Thanks!
Click to expand...
Click to collapse
First, TWRP doesn't work well with latest stock ROM (QQ1A.200105.032), if you'd like to use TWRP, you should use one level down (QQ1A.200105.007)
Second, there's no more upgrade for this ROM, Essential stopped support it, and Feb update was the last one.
Thanks for your reply. For now, all I would love is to get root and not loose the ability to get future updates from Google (I do understand Essential is toast, but with Android 10 Google will provide many updates, right?). So, not much interest in TWRP, just root.
Regarding 4.4.166-stock-twrp-mgk181.img: what Android version does it have, and when installed, can it be upgraded?
Thanks
MarSOnEarth said:
Thanks for your reply. For now, all I would love is to get root and not loose the ability to get future updates from Google (I do understand Essential is toast, but with Android 10 Google will provide many updates, right?). So, not much interest in TWRP, just root.
Regarding 4.4.166-stock-twrp-mgk181.img: what Android version does it have, and when installed, can it be upgraded?
Thanks
Click to expand...
Click to collapse
Maybe I don't quite clear about your question, but why do you use that TWRP file?
I always use the official one from TWRP
https://twrp.me/essential/essentialph1.html
And regarding to Google update, as long as you don't use custom rom + microg then I believe you always get updated from Google Play store for your apps.
chanh2018 said:
Maybe I don't quite clear about your question, but why do you use that TWRP file?
I always use the official one from TWRP
https://twrp.me/essential/essentialph1.html
And regarding to Google update, as long as you don't use custom rom + microg then I believe you always get updated from Google Play store for your apps.
Click to expand...
Click to collapse
Ah, yes! My interest in 4.4.166-stock-twrp-mgk181 image is because, a) I failed to get root with Magisk, and b) this is a `fastboot` image that's already rooted (notice the mgk181 part of the name), BUT because it was made in January of 2019, I think (if it does, and I know too little to know that) it contains older version of Android, hence the question about whether I will be able to update from it.
Thanks
MarSOnEarth said:
Thanks for your reply. For now, all I would love is to get root and not loose the ability to get future updates from Google (I do understand Essential is toast, but with Android 10 Google will provide many updates, right?).
Thanks
Click to expand...
Click to collapse
As I understand it Google will push some updates/security patches for Android via Play store but not everything, you still need updates from your manufacturer (which we now won't get) so you likely won't have all security patches, for this you need an up to date custom ROM like LineageOS (only at ver 9 pie currently) or maybe use the GSI (see Android 11 preview thread) but that is still in development at the moment so probably not suitable for daily use due to bugs & missing features.
MarSOnEarth said:
I actually followed this write up, and it :crying:FAILED.
I tried both ('PH1-Images-QQ1A.200105.032.zip', and 'PH1-OTA-QQ1A.200105.032.zip') Essential provided images and with both Magisk (v. 20.3 and MMgr. v. 7.5.1) failed with "Unsupported/Unknown image format"
Click to expand...
Click to collapse
I don't use TWRP, but I do have root, so if that's enough for you, see the steps below. Magisk version that you mentioned (v.20.3 and MMgr. v.7.5.1) works perfectly.
Since you are already on Feb update (the latest and the last one from Essential), you don't need the OTA zip. You only need the "PH1-Images-QQ1A.200105.032.zip" - the full fastboot image. Make sure you download and install the ADB/Fastboot from Essential website on your PC - it comes bundled with the Windows driver linked on their Developer page. Also make sure you have a good USB cable (do NOT use the one that comes with the phone!), and avoid using USB3 ports on your PC (use USB2 instead).
1. Extract boot.img from PH1-Images-QQ1A.200105.032.zip.
2. Install Magisk Manager, if not installed already.
3. Copy the extracted boot.img to the phone, then patch it with Magisk.
4. Copy the patched boot.img to PC.
5. Reboot the phone into bootloader.
6. Run the command "fastboot flash boot <your_patched_boot>.img" from your PC.
7. Reboot the phone.
8. Enjoy the root access.
IronRoo said:
As I understand it Google will push some updates/security patches for Android via Play store but not everything, you still need updates from your manufacturer (which we now won't get) so you likely won't have all security patches, for this you need an up to date custom ROM like LineageOS (only at ver 9 pie currently) or maybe use the GSI (see Android 11 preview thread) but that is still in development at the moment so probably not suitable for daily use due to bugs & missing features.
Click to expand...
Click to collapse
True. Eventually, a proper custom recovery, like TWRP, might be essential (har, har) years down the road (although I only now am coming down from a Moto X (first gen, 2013) that between AFWall and XPrivacy I managed to keep on stock firmware all along), but now I need to get this phone prepped up for daily use, and that means getting root first of all (and from kt-Froggy's note I shall... I see now where I goofed).
I appreciate your input. Thanks!
kt-Froggy said:
I don't use TWRP, but I do have root, so if that's enough for you, see the steps below. Magisk version that you mentioned (v.20.3 and MMgr. v.7.5.1) works perfectly.
Since you are already on Feb update (the latest and the last one from Essential), you don't need the OTA zip. You only need the "PH1-Images-QQ1A.200105.032.zip" - the full fastboot image. Make sure you download and install the ADB/Fastboot from Essential website on your PC - it comes bundled with the Windows driver linked on their Developer page. Also make sure you have a good USB cable (do NOT use the one that comes with the phone!), and avoid using USB3 ports on your PC (use USB2 instead).
1. Extract boot.img from PH1-Images-QQ1A.200105.032.zip.
2. Install Magisk Manager, if not installed already.
3. Copy the extracted boot.img to the phone, then patch it with Magisk.
4. Copy the patched boot.img to PC.
5. Reboot the phone into bootloader.
6. Run the command "fastboot flash boot <your_patched_boot>.img" from your PC.
7. Reboot the phone.
8. Enjoy the root access.
Click to expand...
Click to collapse
Thanks! From the above, it looks like I messed up on the very first step; I was giving Magisk the whole PH1-Images-QQ1A.200105.032.zip file and not the boot.img extracted from it. Oops!
MarSOnEarth said:
Thanks! From the above, it looks like I messed up on the very first step; I was giving Magisk the whole PH1-Images-QQ1A.200105.032.zip file and not the boot.img extracted from it. Oops!
Click to expand...
Click to collapse
That was my suspicion from how I read your post... ? Yeah, you need just the boot image extracted from the zip. The process is really simple, and it's been working for me with no issues, apart from one specific laptop where I was consistently getting errors for no apparent reason, so I just used other PCs.
kt-Froggy said:
That was my suspicion from how I read your post... Yeah, you need just the boot image extracted from the zip. The process is really simple, and it's been working for me with no issues, apart from one specific laptop where I was consistently getting errors for no apparent reason, so I just used other PCs.
Click to expand...
Click to collapse
OK, that worked splendidly. Thanks!