Edxposed on px6 64/4 android 10 bootloop - MTCD Android Head Units Q&A

Hi! I've found that my standard rom is very stable and better than malaysk/hal9k roms, and I would like install edexposed.
I've tried a lot of combinations with beta/canary, but at the end I always do a factory reset for bootloop after installing riru core.
Anyone has solved this issue? Wich version do you use?
I've rooted with magisk 21.1.
Thank you.

Neither can I install it, but all I get is an ''Edxposed not (properly) installed'' in the Xposed manager app, when installing Riru and Edxposed.
Wonder why you get a bootloop....
Did you fix it already?

No...

Related

Xposed Framework {Advice Needed}

Hey guys,
I've been searching on the web regarding Xposed Framework. I've installed Magisk, and tried to download Xposed Framework for SDK 25, however whenever I reboot, its stick at the Google logo. I also tried the Xposed Installer which said arm64-v8a is not support at the moment, so I was wondering if anyone installed Xposed on their pixel? Any alternative ways?
Cheers
cwk8412 said:
Hey guys,
I've been searching on the web regarding Xposed Framework. I've installed Magisk, and tried to download Xposed Framework for SDK 25, however whenever I reboot, its stick at the Google logo. I also tried the Xposed Installer which said arm64-v8a is not support at the moment, so I was wondering if anyone installed Xposed on their pixel? Any alternative ways?
Cheers
Click to expand...
Click to collapse
wipe your phone and revert to stock and try again through magisk. it will eventually work and id the only xposed working on this phone right now. use the xposed installer in the description of the magisk module.
KittyRgnarok said:
wipe your phone and revert to stock and try again through magisk. it will eventually work and id the only xposed working on this phone right now. use the xposed installer in the description of the magisk module.
Click to expand...
Click to collapse
So I downgraded to Android 7.1.0 (NDE63H) from the official Google Website and installed Magisk v14.5 (beta) by flashing through TWRP Recovery. However, when I download the Xposed Module from Magisk, it was able to install. However, when I press the reboot button on Magisk, it turns into some sort of BootLoop where it stuck at the Google Logo. Any idea?
Cheers
cwk8412 said:
So I downgraded to Android 7.1.0 (NDE63H) from the official Google Website and installed Magisk v14.5 (beta) by flashing through TWRP Recovery. However, when I download the Xposed Module from Magisk, it was able to install. However, when I press the reboot button on Magisk, it turns into some sort of BootLoop where it stuck at the Google Logo. Any idea?
Cheers
Click to expand...
Click to collapse
Oh yeah i forgot to mention, after u downgrade to nougat you need to be on Magisk 14.2 and refuse to update it for xposed to work. ive not yet figured out why this is but i noticed that after updating to 14.3+ and trying to flash it would always do the google loop and i had to full wipe n just keep redoing the process until it works. being updated will cause the fail to boot and updating after its installed will break all installed magisk modules

Stuck bootlooping after OS update

Since i got my oneplus 6 i've had magisk and twrp running on it, the last few times the os has updated i get a bootloop wich i've managed to get out of in the past by running magisk remover and reinstalling magisk, although i confess to stumbling my way through that and do not seem to be able to reproduce the effect this time, i'm currently running oxyOS 9.0.7, no magisk and twrp blu spark, any help would be greatly appreciated in getting magisk back on my phone without bootlooping again.
the current version i should be running is 19.3
paul0909 said:
Since i got my oneplus 6 i've had magisk and twrp running on it, the last few times the os has updated i get a bootloop wich i've managed to get out of in the past by running magisk remover and reinstalling magisk, although i confess to stumbling my way through that and do not seem to be able to reproduce the effect this time, i'm currently running oxyOS 9.0.7, no magisk and twrp blu spark, any help would be greatly appreciated in getting magisk back on my phone without bootlooping again.
the current version i should be running is 19.3
Click to expand...
Click to collapse
After updating OOS you need to re-flash TWRP (stock recovery after OOS update), then Magisk.
What Magisk modules are you using? Most likely the issue if you did what I mentioned above (unclear from your post.
Not many modules, vanced youtube, a call recorder, i honestly can't remember the others, when i get this fixed I'll tidy it up.
To be honest I only wanted magisk for YouTube vanced and installed it before I knew there was a non root option.
PS, I did flash TWRP then magisk, it's been working since I got the phone the week they came out, but the last 2 or 3 software updates have not been smooth like they used to and I get a bootloop

Edxposed on S10e

I managed to root the device...but didn't have much luck with Edxposed yafa Has anyone managed to get Edxposed working on a S10e yet ? If so which variant
Tried both Variations on my SM-970F , YAHFA and Sandhook. Both hung up the phone at the Samsung logo
Edxosed Canary worked
On my S10e with BeyondROM V6.7 it works fine.
I have the following software istalled:
- Magisk 20.4
- Riru-Core v19.8
- Riru-EdXposed v0.4.6.2 (4529) (YAHFA)
- EdXposed Manager v4.5.7 (Enhancement mode)
The modules that I am using: AFWall+, XPrivacyLua
Same exact setup/config: Interested in knowing how you did it?!
gl000008 said:
On my S10e with BeyondROM V6.7 it works fine.
I have the following software istalled:
- Magisk 20.4
- Riru-Core v19.8
- Riru-EdXposed v0.4.6.2 (4529) (YAHFA)
- EdXposed Manager v4.5.7 (Enhancement mode)
The modules that I am using: AFWall+, XPrivacyLua
Click to expand...
Click to collapse
Its good to see evidence that some one with the device I have just purchased is using the same software loadout as I will be. So I have a few questions -
Regarding magisk install, how did you get this installed? or did you follow JohnWu's instructions on his magisk page..?
Also what recovery are you using, is it twrp and if so what version..?
In what sequence did you install magidsk, twrp, xposed..? Which thread/guide on XDA did you use/follow..?
are you able to reboot the phone normally? or if not why not and what are you work arounds?
is one of the fixes for rebooting, powering off/on the phone to flash Multi-disabler?
and lastly have you had any freezing of crashing issues related to Xposed or any Xposed modules..?
As your post is a few months ago and EdXposed, RiRu/, Magisk have been updated since then, what version are you currently running?
b1k3rdude said:
Its good to see evidence that some one with the device I have just purchased is using the same software loadout as I will be. So I have a few questions -
Regarding magisk install, how did you get this installed? or did you follow JohnWu's instructions on his magisk page..?
Click to expand...
Click to collapse
I followed the installation instructions from the BeyondROM thread. I also read many comments in that thread that clarified some doubts, but I don't remember exactly which messages.
b1k3rdude said:
Also what recovery are you using, is it twrp and if so what version..?
Click to expand...
Click to collapse
The BeyondROM requires installation of Ian’s latest patched TWRP. I used version 3.3.1-103. In order to install TWRP I followed the installation instructions in that thread and read many messages to clarify the instructions.
b1k3rdude said:
In what sequence did you install magidsk, twrp, xposed..? Which thread/guide on XDA did you use/follow..?
Click to expand...
Click to collapse
As indicated above, to install the TWRP, BeyondROM and Magisk I used the instructions in Ian's TWRP and BeyondROM threads. Several other messages inside the threads also helped, by I don't remember exactly which ones.
To install EdXposed I used Magisk Manager to download and install the following modules:
Riru-Core v19.8
Riru-EdXposed v0.4.6.2 *4529( *YAHFA)
Then I installed the APK EdXposed Manager v4.5.7 from this page https://github.com/ElderDrivers/EdXposedManager/releases
After restarting the phone, I installed some EdXposed modules from within the application and enabled them, which also required another phone restarting.
b1k3rdude said:
are you able to reboot the phone normally? or if not why not and what are you work arounds?
is one of the fixes for rebooting, powering off/on the phone to flash Multi-disabler?
Click to expand...
Click to collapse
I reboot the phone normally and it restarts in rooted system. This features is provided by BeyondROM and I didn't have to do anything extra.
b1k3rdude said:
and lastly have you had any freezing of crashing issues related to Xposed or any Xposed modules..?
As your post is a few months ago and EdXposed, RiRu/, Magisk have been updated since then, what version are you currently running?
Click to expand...
Click to collapse
I haven't experienced any freezes or crashes in all this time. The only modules that I installed are: AFWall+ and XPrivacyLua.
I haven't updated any software (TWRP, ROM, Magisk, EdXposed) and now there are more up to date packages of all of them.

POCOX3 NFC MIUI 12.5 impossible to install edxposed

hello everyone.i am trying to install edxposed from magisk and no way to get it fone.it says i need to install riru core that i ve installed sevral times.can you help me?

Anyone managed to get edxposed to work on A11 Roms?

Hey guys I flashed riru it installed but edxposed doesn't wanna install
Keeps opening Google Chrome to download it again.
LSposed working fine.

Categories

Resources