Hi,
I own a velvet 5g and i want to be able to install drivers.
I unlocked the phone according to: https://developer.lge.com/resource/mobile/RetrieveBootloader.dev
and rooted it according to: https://forum.xda-developers.com/lg-velvet/how-to/root-lg-velvet-lm-g900em-t4171117
I also installed kali nethunter via the apk.
when i try to insert the module i get this:
Code:
# insmod 8188eu.ko
insmod: ERROR: could not insert module 8188eu.ko: Required key not available
Which makes sense, given that my kernelconfig has CONFIG_MODULE_SIG_FORCE=y.
Now i have to recompile the kernel with a modified config, so i can load modules at runtime.
I got the sourcecode here:
http://opensource.lge.com/osSch/list?types=ALL&search=LMG9 . I chose LMG900EM, i assume LMG900EMW is for another region?
And followed the steps in the README:
Code:
export CROSS_COMPILE=$(pwd)/prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/bin/aarch64-linux-android-
export ARCH=arm64
export SUBARCH=arm64
export DTC_EXT=$(pwd)/prebuilts/misc/linux-x86/dtc/dtc
export CLANG_TRIPLE=aarch64-linux-gnu-
source build/envsetup.sh
lunch 1
make -j4 #1)
tar -xvzf *_Kernel_Q.tar.gz
cd kernel/msm-4.19
mkdir -p out
make ARCH=arm64 O=./out REAL_CC=../../../prebuilts/clang/host/linux-x86/clang-r353983c/bin/clang CLANG_TRIPLE=aarch64-linux-gnu- CROSS_COMPILE=../../../prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/bin/aarch64-linux-android- DTC_EXT=../../../prebuilts/misc/linux-x86/dtc/dtc vendor/caymanlm-perf_defconfig
make ARCH=arm64 O=./out REAL_CC=../../../prebuilts/clang/host/linux-x86/clang-r353983c/bin/clang CLANG_TRIPLE=aarch64-linux-gnu- CROSS_COMPILE=../../../prebuilts/gcc/linux-x86/aarch64/aarch64-linux-android-4.9/bin/aarch64-linux-android- DTC_EXT=../../../prebuilts/misc/linux-x86/dtc/dtc -j4
What strikes me as odd here is that is get this message at step 1):
Code:
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=10
TARGET_PRODUCT=aosp_arm
TARGET_BUILD_VARIANT=eng
TARGET_BUILD_TYPE=release
TARGET_ARCH=arm
TARGET_ARCH_VARIANT=armv7-a-neon
TARGET_CPU_VARIANT=generic
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.15.0-124-generic-x86_64-Ubuntu-18.04.5-LTS
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=QQ1D.200205.002
OUT_DIR=out
============================================
Why is HOST_CROSS_OS set to windows? did i miss this value when setting my environment variables?
After i run it all I end up with an Image file in ./out/arch/arm64/boot and a dts folder.
I also tried this with the kali-nethunter-kernel from:
and then I end up with an Image an Image-dtb and a 20 byte Image-dtb-hdr file.
I tried booting from all of those Image files after repacking.
Code:
fastboot boot boot.img
But it is always stuck at boot until i restart.
I think this is because my extracted boot.img has a zImage file and my compile process is generating an Image file. Or because i dont use the dtb file correctly.
I havent tried flashing it yet, because i would assume the same result, except i just have to reflash it.
Did i go wrong anywhere or how can i fix this?
Thanks in advance for your advice.
Related
Im trying to build a ROM from the AOSP source(just for a learning experience). I followed the guide on the AOSP website up to downloading the source. I got the source downloaded when i found ctso's guide.
It had all the info on getting the HTC binaries and junk, so i followed that and extracted all the stuff.
The guide by ctso says that i need to source a vendor tree, something the AOSP website doesnt mention at all.
$ source build/envsetup.sh
$ lunch cyanogen_dream_us-eng
If i just want to make a ROM for the G1 what should i do? Should i just skip this part and do:
$ cd ~/mydroid
$ make
or do i need to source a vendor tree? if so how would i do this, because the specified command above only seems to be for the people who used the cyanogen repository?
how do i specify a build target?
kingkurry said:
how do i specify a build target?
Click to expand...
Click to collapse
Code:
source build/envsetup.sh
including vendor/aosp/vendorsetup.sh
debian:~/Desktop/android/master$ lunch
You're building on Linux
generic-eng simulator aosp_emulator_us-eng aosp_emulator_eu-eng aosp_dream_us-userdebug aosp_dream_eu-userdebug aosp_dream_us-eng aosp_dream_eu-eng aosp_sapphire_us-userdebug aosp_sapphire_eu-userdebug aosp_sapphire_us-eng aosp_sapphire_eu-eng
Lunch menu... pick a combo:
1. generic-eng
2. simulator
3. aosp_emulator_us-eng
4. aosp_emulator_eu-eng
5. aosp_dream_us-userdebug
6. aosp_dream_eu-userdebug
7. aosp_dream_us-eng
8. aosp_dream_eu-eng
9. aosp_sapphire_us-userdebug
10. aosp_sapphire_eu-userdebug
11. aosp_sapphire_us-eng
12. aosp_sapphire_eu-eng
Which would you like? [generic-eng]
Choose the one you like....
Code:
Which would you like? [generic-eng]
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=2.1-update1
TARGET_PRODUCT=generic
TARGET_BUILD_VARIANT=eng
TARGET_SIMULATOR=false
TARGET_BUILD_TYPE=release
TARGET_ARCH=arm
HOST_ARCH=x86
HOST_OS=linux
HOST_BUILD_TYPE=release
BUILD_ID=ECLAIR
============================================
and build it....
Code:
make
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=2.1-update1
TARGET_PRODUCT=generic
TARGET_BUILD_VARIANT=eng
TARGET_SIMULATOR=false
TARGET_BUILD_TYPE=release
TARGET_ARCH=arm
HOST_ARCH=x86
HOST_OS=linux
HOST_BUILD_TYPE=release
BUILD_ID=ECLAIR
============================================
....
So after picking the target, and building, will it compile the source into an img file or what?
also, how would i select which os version i want to build? it seems to default to android 2.1.
I've been trying to compile jt's ICS rom, but I've been running into a number of different issues. I'm new to this whole thing, but I would really like to learn as much as possible and hopefully be able to start modding roms. I've done a ton of reading and trial/error all week (I started a few days before jt dropped ICS on the Infuse), but I seem to have hit a brick wall. Instead of bashing my head (and probably screwing things up more), I decided to stop and ask for help. Here is what I've done so far (I'm on OS X 10.7.3 btw):
I read the full "Getting Started" section of http://source.google.com (probably twice by now), and followed their instructions for initializing the build environment in OS X (i.e. getting all necessary software, creating a case-sensitive dev environment, initializing and syncing repo, etc)
I did the OS X 10.7 "hacks" from the CM wiki's SGS II compile guide.
Cloned the following repos from jt:
android_device_samsung_infuse4g
android_device_samsung_aries-common
android_vendor_cm
android_kernel_samsung_dempsey
(I'm switching to the terminal commands + output in code boxes now)
[email protected]:/Volumes/android/ROM_DIR$ . build/envsetup.sh
Code:
including device/samsung/maguro/vendorsetup.sh
including device/samsung/tuna/vendorsetup.sh
including device/ti/panda/vendorsetup.sh
including vendor/cm/vendorsetup.sh
including sdk/bash_completion/adb.bash
[email protected]:/Volumes/android/ROM_DIR$ lunch full_infuse4g-eng
Code:
build/core/product_config.mk:193: *** _nic.PRODUCTS.[[device/samsung/infuse4g/full_infuse4g.mk]]: "vendor/samsung/aries-common/aries-vendor-blobs.mk" does not exist. Stop.
** Don't have a product spec for: 'full_infuse4g'
** Do you have the right repo manifest?
I noticed that jt's extract-files.sh is saving some blobs as 'infuse-vendor-blobs.mk' so I cp'd them to the name/location above:
[email protected]:/Volumes/android/ROM_DIR$ sudo cp vendor/samsung/infuse4g/infuse4g-vendor-blobs.mk vendor/samsung/aries-common/aries-vendor-blobs.mk
I re-read CM's build wiki and saw that they cp the device's buildspec.mk to system/buildspec.mk
[email protected]:/Volumes/android/ROM_DIR$ sudo cp device/samsung/infuse4g/infuse4g.mk system/buildspec.mk
[email protected]:/Volumes/android/ROM_DIR$ . build/envsetup.sh
Code:
including device/samsung/maguro/vendorsetup.sh
including device/samsung/tuna/vendorsetup.sh
including device/ti/panda/vendorsetup.sh
including vendor/cm/vendorsetup.sh
including sdk/bash_completion/adb.bash
[email protected]:/Volumes/android/ROM_DIR$ lunch full_infuse4g-eng
Code:
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=4.0.1
TARGET_PRODUCT=full_infuse4g
TARGET_BUILD_VARIANT=eng
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm
TARGET_ARCH_VARIANT=armv7-a-neon
HOST_ARCH=x86
HOST_OS=darwin
HOST_BUILD_TYPE=release
BUILD_ID=ITL41D
============================================
[email protected]:/Volumes/android/ROM_DIR$ make -j4 otapackage
Code:
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=4.0.1
TARGET_PRODUCT=full_infuse4g
TARGET_BUILD_VARIANT=eng
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm
TARGET_ARCH_VARIANT=armv7-a-neon
HOST_ARCH=x86
HOST_OS=darwin
HOST_BUILD_TYPE=release
BUILD_ID=ITL41D
============================================
Checking build tools versions...
Please install the 10.5 SDK on this machine at /Developer/SDKs/MacOSX10.5.sdk
external/qemu/Makefile.android:82: *** Aborting the build.. Stop.
Created a symlink for the OS X SDK in the location above:
[email protected]:/Volumes/android/ROM_DIR$ sudo ln -s /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.6.sdk /Developer/SDKs/MacOSX10.5.sdk
[email protected]:/Volumes/android/ROM_DIR$ make -j4 otapackage
Code:
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=4.0.1
TARGET_PRODUCT=full_infuse4g
TARGET_BUILD_VARIANT=eng
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm
TARGET_ARCH_VARIANT=armv7-a-neon
HOST_ARCH=x86
HOST_OS=darwin
HOST_BUILD_TYPE=release
BUILD_ID=ITL41D
============================================
build/core/Makefile:25: warning: overriding commands for target `out/target/product/infuse4g/system/etc/permissions/android.software.live_wallpaper.xml'
build/core/Makefile:25: warning: ignoring old commands for target `out/target/product/infuse4g/system/etc/permissions/android.software.live_wallpaper.xml'
build/core/Makefile:25: warning: overriding commands for target `out/target/product/infuse4g/system/lib/egl/libGLES_android.so'
build/core/base_rules.mk:523: warning: ignoring old commands for target `out/target/product/infuse4g/system/lib/egl/libGLES_android.so'
build/core/Makefile:25: warning: overriding commands for target `out/target/product/infuse4g/system/lib/libril.so'
build/core/base_rules.mk:523: warning: ignoring old commands for target `out/target/product/infuse4g/system/lib/libril.so'
build/core/Makefile:25: warning: overriding commands for target `out/target/product/infuse4g/system/bin/rild'
build/core/base_rules.mk:523: warning: ignoring old commands for target `out/target/product/infuse4g/system/bin/rild'
No private recovery resources for TARGET_DEVICE infuse4g
Header: out/host/darwin-x86/obj/include/libexpat/expat.h
Header: out/host/darwin-x86/obj/include/libexpat/expat_external.h
Header: out/target/product/infuse4g/obj/include/libexpat/expat.h
Header: out/target/product/infuse4g/obj/include/libexpat/expat_external.h
Header: out/host/darwin-x86/obj/include/libpng/png.h
Header: out/host/darwin-x86/obj/include/libpng/pngconf.h
Header: out/host/darwin-x86/obj/include/libpng/pngusr.h
Header: out/target/product/infuse4g/obj/include/libpng/png.h
Header: out/target/product/infuse4g/obj/include/libpng/pngconf.h
Header: out/target/product/infuse4g/obj/include/libpng/pngusr.h
Header: out/target/product/infuse4g/obj/include/libsonivox/eas.h
Header: out/target/product/infuse4g/obj/include/libsonivox/eas_types.h
Header: out/target/product/infuse4g/obj/include/libsonivox/jet.h
Header: out/target/product/infuse4g/obj/include/libsonivox/eas_reverb.h
Header: out/target/product/infuse4g/obj/include/libsonivox/ARM_synth_constants_gnu.inc
Header: out/target/product/infuse4g/obj/include/libwpa_client/wpa_ctrl.h
Notice file: system/core/libmincrypt/NOTICE -- out/host/darwin-x86/obj/NOTICE_FILES/src//lib/libmincrypt.a.txt
Directory: out/target/product/infuse4g/root/sbin
Directory: out/target/product/infuse4g/root/dev
Directory: out/target/product/infuse4g/root/proc
Directory: out/target/product/infuse4g/root/system
Directory: out/target/product/infuse4g/root/sys
Directory: out/target/product/infuse4g/root/data
prebuilt/darwin-x86/toolchain/arm-linux-androideabi-4.4.x/bin/arm-linux-androideabi-gcc -mthumb-interwork -Ibionic/libc/private -DCRT_LEGACY_WORKAROUND -Ibionic/libc/private -o out/target/product/infuse4g/obj/lib/crtbegin_static.o -c bionic/libc/arch-arm/bionic/crtbegin_static.S
prebuilt/darwin-x86/toolchain/arm-linux-androideabi-4.4.x/bin/arm-linux-androideabi-gcc -mthumb-interwork -Ibionic/libc/private -DCRT_LEGACY_WORKAROUND -Ibionic/libc/private -o out/target/product/infuse4g/obj/lib/crtend_so.o -c bionic/libc/arch-arm/bionic/crtend_so.S
prebuilt/darwin-x86/toolchain/arm-linux-androideabi-4.4.x/bin/arm-linux-androideabi-gcc -mthumb-interwork -Ibionic/libc/private -DCRT_LEGACY_WORKAROUND -Ibionic/libc/private -o out/target/product/infuse4g/obj/lib/crtbegin_so.o -c bionic/libc/arch-arm/bionic/crtbegin_so.S
prebuilt/darwin-x86/toolchain/arm-linux-androideabi-4.4.x/bin/arm-linux-androideabi-gcc -mthumb-interwork -Ibionic/libc/private -DCRT_LEGACY_WORKAROUND -Ibionic/libc/private -o out/target/product/infuse4g/obj/lib/crtend_android.o -c bionic/libc/arch-arm/bionic/crtend.S
Notice file: system/core/init/NOTICE -- out/target/product/infuse4g/obj/NOTICE_FILES/src//root/init.txt
Notice file: system/core/liblog/NOTICE -- out/target/product/infuse4g/obj/NOTICE_FILES/src//system/lib/liblog.a.txt
Notice file: system/core/libcutils/NOTICE -- out/target/product/infuse4g/obj/NOTICE_FILES/src//system/lib/libcutils.a.txt
Notice file: bionic/libc/NOTICE -- out/target/product/infuse4g/obj/NOTICE_FILES/src//system/lib/libc.a.txt
Notice file: bionic/libc/NOTICE -- out/target/product/infuse4g/obj/NOTICE_FILES/src//system/lib/libc.so.txt
Notice file: bionic/libc/NOTICE -- out/target/product/infuse4g/obj/NOTICE_FILES/src//system/lib/libc_common.a.txt
Notice file: bionic/libdl/NOTICE -- out/target/product/infuse4g/obj/NOTICE_FILES/src//system/lib/libdl.so.txt
Notice file: bionic/libstdc++/NOTICE -- out/target/product/infuse4g/obj/NOTICE_FILES/src//system/lib/libstdc++.so.txt
make: *** No rule to make target `device/samsung/aries-common/lpm.rc', needed by `out/target/product/infuse4g/root/lpm.rc'. Stop.
make: *** Waiting for unfinished jobs....
Notice file: bionic/libm/NOTICE -- out/target/product/infuse4g/obj/NOTICE_FILES/src//system/lib/libm.so.txt
Notice file: system/core/adb/NOTICE -- out/target/product/infuse4g/obj/NOTICE_FILES/src//root/sbin/adbd.txt
A couple notices and warnings in the output above, but this is the error that stopped it:
make: *** No rule to make target `device/samsung/aries-common/lpm.rc', needed by `out/target/product/infuse4g/root/lpm.rc'. Stop.
How do I fix that? Also, were my assumptions earlier about cp'ing the blobs and the buildspec correct, or did I just mess things up?
Any help would be greatly appreciated, even if it is a link to a step that I might have missed in the compile process. Thanks in advance!
(Mods: I couldn't decide if this belongs in development or Q&A...if it's in the wrong section, let me know and I'll remove & repost in the right place)
Hello all!
I have recently started to get my system ready for some android software and kernel programming. I am following the guide from the cyanogenmod website. I am unable to post an exact link due to my low post count, apologies. If you really need to see which guide I am using, message me and ill get it to you.
I am stuck on the last step of "Configure the Build."
When I send "make ARCH=arm CROSS_COMPILE=$CCOMPILER oldconfig" to terminal, the following is my output.
Code:
[email protected]:~/android/system# make ARCH=arm CROSS_COMPILE=$CCOMPILER oldconfig
/bin/bash: bison: command not found
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=4.1.2
TARGET_PRODUCT=full
TARGET_BUILD_VARIANT=eng
TARGET_BUILD_TYPE=release
TARGET_BUILD_APPS=
TARGET_ARCH=arm
TARGET_ARCH_VARIANT=armv7-a
HOST_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-3.8.0-19-generic-x86_64-with-Ubuntu-13.04-raring
HOST_BUILD_TYPE=release
BUILD_ID=JZO54K
OUT_DIR=/root/android/system/out
============================================
grep: build/target/board/generic/recovery.fstab: No such file or directory
find: `src': No such file or directory
build/core/tasks/kernel.mk:82: **********************************************************
build/core/tasks/kernel.mk:83: * Kernel source found, but no configuration was defined *
build/core/tasks/kernel.mk:84: * Please add the TARGET_KERNEL_CONFIG variable to your *
build/core/tasks/kernel.mk:85: * BoardConfig.mk file *
build/core/tasks/kernel.mk:86: **********************************************************
make: *** No rule to make target `oldconfig'. Stop.
[email protected]:~/android/system#
I am unable to locate BoardConfig.mk for an unknown reason. Also, I dont know why the GREP returned no such file or directory, and why src wasnt found either.
Please help, I am almost completely set up to start helping the community!
Thanks,
Azraelpwnz
module "generated_kernel_includes": cmd: unknown variable '$(KERNEL_MAKE_FLAGS)'
Os-Ubuntu 18.10
android os-lineage os 16
download the lineage os 16 code using git
cd lineage_16
repo sync
make clobber
output
----------
15:09:36 Entire build directory removed.
source build/envsetup.sh
o/p
------------
including device/generic/car/vendorsetup.sh
including device/generic/mini-emulator-arm64/vendorsetup.sh
including device/generic/mini-emulator-armv7-a-neon/vendorsetup.sh
including device/generic/mini-emulator-x86_64/vendorsetup.sh
including device/generic/mini-emulator-x86/vendorsetup.sh
including device/generic/uml/vendorsetup.sh
including device/huawei/angler/vendorsetup.sh
including vendor/lineage/vendorsetup.sh
including sdk/bash_completion/adb.bash
lunch
o/p
-------
You're building on Linux
Lunch menu... pick a combo:
1. aosp_arm-eng
2. aosp_arm64-eng
3. aosp_mips-eng
4. aosp_mips64-eng
5. aosp_x86-eng
6. aosp_x86_64-eng
7. aosp_car_arm-userdebug
8. aosp_car_arm64-userdebug
9. aosp_car_x86-userdebug
10. aosp_car_x86_64-userdebug
11. mini_emulator_arm64-userdebug
12. m_e_arm-userdebug
13. mini_emulator_x86_64-userdebug
14. mini_emulator_x86-userdebug
15. uml-userdebug
16. aosp_angler-userdebug
Which would you like? [aosp_arm-eng] :11
Trying dependencies-only mode on a non-existing device tree?
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=9
TARGET_PRODUCT=mini_emulator_arm64
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a15
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.18.0-10-generic-x86_64-Ubuntu-18.10
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=PPR2.181005.003
OUT_DIR=/home/taqi/Documents/android-lineage-16.0/out
============================================
$make -j4
o/p
--------------
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=9
TARGET_PRODUCT=mini_emulator_arm64
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a15
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.18.0-10-generic-x86_64-Ubuntu-18.10
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=PPR2.181005.003
OUT_DIR=/home/taqi/Documents/android-lineage-16.0/out
============================================
[1/1] /home/taqi/Documents/android-lineage-16.0/out/soong/.mi...cuments/android-lineage-16.0/out/soong/.bootstrap/build.ninja
[55/56] glob prebuilts/ndk/stl.bp
[80/80] /home/taqi/Documents/android-lineage-16.0/out/soong/....ome/taqi/Documents/android-lineage-16.0/out/soong/build.ninja
FAILED: /home/taqi/Documents/android-lineage-16.0/out/soong/build.ninja
/home/taqi/Documents/android-lineage-16.0/out/soong/.bootstrap/bin/soong_build -t -l /home/taqi/Documents/android-lineage-16.0/out/.module_paths/Android.bp.list -b /home/taqi/Documents/android-lineage-16.0/out/soong -n /home/taqi/Documents/android-lineage-16.0/out -d /home/taqi/Documents/android-lineage-16.0/out/soong/build.ninja.d -o /home/taqi/Documents/android-lineage-16.0/out/soong/build.ninja Android.bp
error: vendor/lineage/build/soong/Android.bp:31:8: module "generated_kernel_includes": cmd: unknown variable '$(KERNEL_MAKE_FLAGS)'
ninja: build stopped: subcommand failed.
15:49:16 soong bootstrap failed with: exit status 1
#### failed to build some targets (03:03 (mm:ss)) ####
Please conduct "repo sync" again. This issue will solve.
I've got the same issue. Unfortunately repo sync did not fix it. What is the patch/commit that fixes this?
SaburoSiro said:
Please conduct "repo sync" again. This issue will solve.
Click to expand...
Click to collapse
Could you please link the commit?
[email protected] said:
Os-Ubuntu 18.10
android os-lineage os 16
download the lineage os 16 code using git
cd lineage_16
repo sync
make clobber
output
----------
15:09:36 Entire build directory removed.
source build/envsetup.sh
o/p
------------
including device/generic/car/vendorsetup.sh
including device/generic/mini-emulator-arm64/vendorsetup.sh
including device/generic/mini-emulator-armv7-a-neon/vendorsetup.sh
including device/generic/mini-emulator-x86_64/vendorsetup.sh
including device/generic/mini-emulator-x86/vendorsetup.sh
including device/generic/uml/vendorsetup.sh
including device/huawei/angler/vendorsetup.sh
including vendor/lineage/vendorsetup.sh
including sdk/bash_completion/adb.bash
lunch
o/p
-------
You're building on Linux
Lunch menu... pick a combo:
1. aosp_arm-eng
2. aosp_arm64-eng
3. aosp_mips-eng
4. aosp_mips64-eng
5. aosp_x86-eng
6. aosp_x86_64-eng
7. aosp_car_arm-userdebug
8. aosp_car_arm64-userdebug
9. aosp_car_x86-userdebug
10. aosp_car_x86_64-userdebug
11. mini_emulator_arm64-userdebug
12. m_e_arm-userdebug
13. mini_emulator_x86_64-userdebug
14. mini_emulator_x86-userdebug
15. uml-userdebug
16. aosp_angler-userdebug
Which would you like? [aosp_arm-eng] :11
Trying dependencies-only mode on a non-existing device tree?
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=9
TARGET_PRODUCT=mini_emulator_arm64
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a15
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.18.0-10-generic-x86_64-Ubuntu-18.10
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=PPR2.181005.003
OUT_DIR=/home/taqi/Documents/android-lineage-16.0/out
============================================
$make -j4
o/p
--------------
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=9
TARGET_PRODUCT=mini_emulator_arm64
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv7-a-neon
TARGET_2ND_CPU_VARIANT=cortex-a15
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-4.18.0-10-generic-x86_64-Ubuntu-18.10
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=PPR2.181005.003
OUT_DIR=/home/taqi/Documents/android-lineage-16.0/out
============================================
[1/1] /home/taqi/Documents/android-lineage-16.0/out/soong/.mi...cuments/android-lineage-16.0/out/soong/.bootstrap/build.ninja
[55/56] glob prebuilts/ndk/stl.bp
[80/80] /home/taqi/Documents/android-lineage-16.0/out/soong/....ome/taqi/Documents/android-lineage-16.0/out/soong/build.ninja
FAILED: /home/taqi/Documents/android-lineage-16.0/out/soong/build.ninja
/home/taqi/Documents/android-lineage-16.0/out/soong/.bootstrap/bin/soong_build -t -l /home/taqi/Documents/android-lineage-16.0/out/.module_paths/Android.bp.list -b /home/taqi/Documents/android-lineage-16.0/out/soong -n /home/taqi/Documents/android-lineage-16.0/out -d /home/taqi/Documents/android-lineage-16.0/out/soong/build.ninja.d -o /home/taqi/Documents/android-lineage-16.0/out/soong/build.ninja Android.bp
error: vendor/lineage/build/soong/Android.bp:31:8: module "generated_kernel_includes": cmd: unknown variable '$(KERNEL_MAKE_FLAGS)'
ninja: build stopped: subcommand failed.
15:49:16 soong bootstrap failed with: exit status 1
Click to expand...
Click to collapse
[email protected] said:
#### failed to build some targets (03:03 (mm:ss)) ####
Click to expand...
Click to collapse
your command make -j4 is wrong. Just use 'mka bacon -j4' if you are building a rom.
Im having the same issue building for flounder.
Hi. A am having the same issue.
Dut found solution, may be.
This link can be helpful.
This is a device tree adaptation problem. You just need to do a "breakfast <device_code>", and the error that it throws will automatically tell you what filename that your aosp_device.mk should have...
In my case, I had the same problem, when I'm trying with xpe_sunny.mk, but the actual string I should have was xperience_sunny.mk
After adapting my device tree (Android.mk, common lunch choices, rom.dependencies, etc,) then PRODUCT_SOONG_NAMESPACES successfully took all the directories that it needed.
Good day everyone!
Recently I have decided to try to compile PixelExperience myself, but I ran into some problems.
I have downloaded the ROM source according to the wiki (branch is twelve at https://github.com/PixelExperience/manifest). Everything went according to plan until I tried building the source with mka bacon -j8.
Here's the output of the command from above (using -j1 instead of -j8 in the command above gives the same error):
Code:
21:21:00 ************************************************************
21:21:00 You are building on a machine with 15.6GB of RAM
21:21:00
21:21:00 The minimum required amount of free memory is around 16GB,
21:21:00 and even with that, some configurations may not work.
21:21:00
21:21:00 If you run into segfaults or other errors, try reducing your
21:21:00 -j value.
21:21:00 ************************************************************
vendor/aosp/config/bootanimation.mk:9: warning: "TARGET_BOOT_ANIMATION_RES is undefined, assuming 1080p"
build/make/core/soong_config.mk:199: warning: BOARD_PLAT_PUBLIC_SEPOLICY_DIR has been deprecated. Use SYSTEM_EXT_PUBLIC_SEPOLICY_DIRS instead.
build/make/core/soong_config.mk:200: warning: BOARD_PLAT_PRIVATE_SEPOLICY_DIR has been deprecated. Use SYSTEM_EXT_PRIVATE_SEPOLICY_DIRS instead.
============================================
PLATFORM_VERSION_CODENAME=REL
PLATFORM_VERSION=12
CUSTOM_VERSION=PixelExperience_raphael-12.1-20220811-1921-UNOFFICIAL
TARGET_PRODUCT=aosp_raphael
TARGET_BUILD_VARIANT=userdebug
TARGET_BUILD_TYPE=release
TARGET_ARCH=arm64
TARGET_ARCH_VARIANT=armv8-a
TARGET_CPU_VARIANT=generic
TARGET_2ND_ARCH=arm
TARGET_2ND_ARCH_VARIANT=armv8-a
TARGET_2ND_CPU_VARIANT=generic
HOST_ARCH=x86_64
HOST_2ND_ARCH=x86
HOST_OS=linux
HOST_OS_EXTRA=Linux-5.17.5-xanmod1-x86_64-Gentoo-Linux
HOST_CROSS_OS=windows
HOST_CROSS_ARCH=x86
HOST_CROSS_2ND_ARCH=x86_64
HOST_BUILD_TYPE=release
BUILD_ID=SQ3A.220705.004
OUT_DIR=out
PRODUCT_SOONG_NAMESPACES=vendor/xiaomi/raphael device/xiaomi/raphael hardware/xiaomi hardware/qcom-caf/sm8150 vendor/qcom/opensource/commonsys/display vendor/qcom/opensource/commonsys-intf/display vendor/qcom/opensource/display vendor/qcom/opensource/data-ipa-cfg-mgr vendor/qcom/opensource/dataservices vendor/qcom/opensource/commonsys/packages/apps/Bluetooth vendor/qcom/opensource/commonsys/system/bt/conf vendor/qcom/opensource/commonsys/system/bt/main hardware/nxp hardware/qcom-caf/common/fwk-detect
============================================
[100% 1/1] out/soong/.bootstrap/bin/soong_build out/soong/build.ninja
FAILED: out/soong/build.ninja
cd "$(dirname "out/soong/.bootstrap/bin/soong_build")" && BUILDER="$PWD/$(basename "out/soong/.bootstrap/bin/soong_build")" && cd
/ && env -i "$BUILDER" --top "$TOP" --out "out/soong" -n "out" -d "out/soong/build.ninja.d" -t -l out/.module_paths/Android.bp.list -globFile out/soong/.bootstrap/build-globs.ninja -o out/soong/build.ninja --available_env out/soong/soong.environment.available --used_env out/soong/soong.environment.used Android.bp
error: frameworks/base/boot/Android.bp:44:1: "platform-bootclasspath" depends on undefined module "WfdCommon"
21:21:50 soong bootstrap failed with: exit status 1
From what I can gather "WfdCommon" is missing or is not registered. After a bit of digging I found out that maybe there should be a file called WfdCommon.jar, so I ran find -name WfdCommon.jar but it didn't find anything.
I want to build for my Xiaomi Mi 9T Pro (codenamed raphael) on Gentoo Linux (x86_64) by the way. I have an Intel Core i5 4590 running on 3.7 Ghz and 16 Gb of DDR3 RAM. Also an additional 149 Gb free space on the source partition (formatted as ext4).
What should I do? Why is it missing? Can I get this file from somewhere else?