Quick question about switching to Stock original ROM. - Xiaomi Mi 10 Ultra Questions & Answers

I am buying the phone from someone who already has flashed to A11 update (weekly). I want to change it back to stock China ROM. Any ideas how I can do it? (I am a total noobi) so explain in detail please. Thanks so much.

You can download the latest stock Chinese from mifirm.net and flash it from your twrp recovery. You will need to format data from twrp too. If you don't have twrp recovery installed, you can install a stock Chinese fastboot version but you will need a PC to do this.
I have a guide for flashing on my gdrive here https://drive.google.com/file/d/12BoSJCSSF-nxVKn1NyjlOA2u3PatrC88/view?usp=drivesdk and I think that most items are covered but as you are going from EU to stock, ignore the part about replacing the fastboot.exe file, as the stock from mifirm.net should be ok if you can't do it from twrp.
I hope the doc helps but you can always message me if you need more info or steering the right direction.

There is twrp. Can you guide me for twrp?

Related

Stuck with lost IMEI after rooting

Hi guys,
yesterday I rooted my galaxy S7 sm-g930f.
Everything worked fine and in a few minutes later I was back on stock fw with twrp and magisk root. But unfortunately I lost my IMEI and have no backup of this.
I read that I can resolve it by flashing factory binary.
Can anyone guide me through the steps I have to do? I think I'm able to manage it but wondering if there are any files I do need for my fw version or can i simple download any factory binary?
Thanks in advance
Catarrer
Flash firmware with a newer modem version compared to the one in the custom rom you were using (not factory/combination). Use the same CSC, the stock recovery might be required to apply CSC.
If that doesn't work, wipe data (backup photos and all that).
Backup EFS in TWRP, nothing else unless sure.
Hi Bryan48765,
Thanks for your reply.
I'm downloading atm the newest fw which is available for my device. (May be take a while with 2k dsl...)
I'm going more concrete about the steps I did:
I activated the dev options, switched on the oem unlock and then switched to download mode.
Installed the latest twrp with the latest Odin version.
First I rooted my device then with chainfires supersu, but it doenst show up as rooted (rootchecker) so I flashed back a boot loader for my device which I downloaded here. Unfortunately i don't know any more which one...
After flashing the vootloader I installed magisk and everything was fine... and then a few hours later i recognised that mobile network isn't working. A few looks later I saw that there was no imei... so I don't know if it was working before flashing the boot loader or the error occurred afterwards.
I'll try tomorrow to flash the downloaded fw.
Do I get the single csc file for my current version or do I need to download the whole fw? (Takes about 5h)
Thanks in advance
Cayarrer
Thank you!
I'm now back to stock fw and have my imei back! Thank you so much!
At weekend I will try to root again. Do I need to pay attention to anything to not lose my imei again?
I would follow these steps:
Flash latest twrp for my device without auto reboot, boot directly into recovery and flash there the no-verity file and then the magisk. Am I right or do I need some more or less?
You guys at sea are so amazing! Thank you!
Catarrer2 said:
Thank you!
I'm now back to stock fw and have my imei back! Thank you so much!
At weekend I will try to root again. Do I need to pay attention to anything to not lose my imei again?
I would follow these steps:
Flash latest twrp for my device without auto reboot, boot directly into recovery and flash there the no-verity file and then the magisk. Am I right or do I need some more or less?
You guys at sea are so amazing! Thank you!
Click to expand...
Click to collapse
Backup the EFS, and store it in the cloud (not public), maybe encrypt the zip it is stored in. Only if a lot of firmware changes and data wipes don't return the imei, restore the backup. The restoration could also affect some modem settings, battery wear info, and it might not be restored correctly.
Unlock the bootloader before flashing the latest twrp. RMM serms to not apply here.
If the phone is encrypted (should be visible in the security settings) twrp might show that it "failed to mount /data", and it's normally where the root zip is stored. Alternatively, move the root zip and others to the external sdcard, though with root+encryption there might or might not be a risk for a type of brick.
Encryption is disabled by formatting /data and flashing a zip that disables it.
no-verity-opt-encrypt might already be in magisk but flash it anyway and if it fails return to the stock kernel ("boot" in twrp)

Does anyone out there have a Gome U7 and knows how to root it?

I bought this phone in aliexpress and i'm pretty satisfied so far. Except by the fact that it's a totally obscure phone. You can't even find cases for it.
Anyway, the real problem is the lack of root methods. I tried all the root apks out there without success, and there is no known way to unlock the boot loader.
So, as a last effort, i'm trying to find someone that maybe managed to root this phone and could share the knowlege with us. Or at least find some other Gome U7 owners to share this frustation.
Thank you!
SkynyrdZ said:
I bought this phone in aliexpress and i'm pretty satisfied so far. Except by the fact that it's a totally obscure phone. You can't even find cases for it.
Anyway, the real problem is the lack of root methods. I tried all the root apks out there without success, and there is no known way to unlock the boot loader.
So, as a last effort, i'm trying to find someone that maybe managed to root this phone and could share the knowlege with us. Or at least find some other Gome U7 owners to share this frustation.
Thank you!
Click to expand...
Click to collapse
From the Aliexpress listing I found, this is MTK6757CD Android 7.1 Nougat. It shouldn't be so difficult to root.
Have you been able to backup / dump the firmware?
Yes, thats the model!.
About the backup, i don't tried it yet, but i supose i can via ADB comands.
The problem is that none of the root apks work, and i can't try to install a root script via the default recovery.
Holy fuc...king cow! I did it!
The dificulty of finding the files for this phone made this task much dificult than it shoul be, but anyway, for the possible people that come accros this thread, that's how i did it:
download the mtk drivers here: http://www.mediafire.com/file/jbxsq68g8dd4gk6/MTK_USB_All_v1.0.8.zip
download the stock rom here: https://cloud.mail.ru/public/8hMx/N7fqf8X62
Put the stock rom's boot.img on your phone;
Install the magisk apk, click install, and then use the patch boot.img function;
Select the boot.img from the stock rom;
After the patch, replace the patched version with the original version on the rom folder on your PC;
Use the SP flash tool to flash it.
And that's it!
I can't believe it took me four days to figure this out hahaha
Anyway, i hope it helps someone. Have a great day.
Edit: unfortunately the bootloader is still locked, so i can't flash magisk modules. Is there a way to use root privelege to unlock it?
@SkynyrdZ The Link you provided for the stock ROM is for USB drivers.
Possible to link to a western Gome U7 stock rom with playstore on?
Thank you
Pussmobile said:
@SkynyrdZ The Link you provided for the stock ROM is for USB drivers.
Possible to link to a western Gome U7 stock rom with playstore on?
Thank you
Click to expand...
Click to collapse
Oops, my bad. Here's the link: https://cloud.mail.ru/public/8hMx/N7fqf8X62
Thank You
@SkynyrdZ
Is that the only stock ROM out there?
I know it's a chinese phone but it originally had western stock ROM when arrived - As in playstore was available on it. Chinese version is very stubborn in trying to install western apps - Playstore for one does not open when you install via alt options.
Pussmobile said:
@SkynyrdZ
Is that the only stock ROM out there?
I know it's a chinese phone but it originally had western stock ROM when arrived - As in playstore was available on it. Chinese version is very stubborn in trying to install western apps - Playstore for one does not open when you install via alt options.
Click to expand...
Click to collapse
I didn't really flash it, i just used the bootloader file on it for the root process. My device came with the stock android rom, with gapps pre-installed.
But as far as i know, you can have play store on any android. Just make sure you install google play services alongside.
I am waiting for my U7 arrived. Any one try this website :
https://unofficialtwrp.com/gome-u7-twrp-3-2-root/
KimLe said:
I am waiting for my U7 arrived. Any one try this website :
https://unofficialtwrp.com/gome-u7-twrp-3-2-root/
Click to expand...
Click to collapse
I didn't try it because it seens fake to me. Also, the bootloader on this phone is locked, so fastboot comands didn't work when i tried. The only way i could flash anything was with SPtool.
But there's a group out there called twrp builder that compiles the twrp recovery to a lot of devices. I'm trying to put the gome u7 on their queue, but right now, they are busy with a lot of builds.
TWRP recovery for root with magisk from 4PDA Forum.
and firmware. Gome_2017M27A_MT6757_V01 (U7_GM_00_V1.0)
And I found root guide from GOME U Series Forum. (Chinese) It is same as this website.
(I am waiting my U7 delivery too.)
SkynyrdZ said:
I didn't try it because it seens fake to me. Also, the bootloader on this phone is locked, so fastboot comands didn't work when i tried. The only way i could flash anything was with SPtool.
But there's a group out there called twrp builder that compiles the twrp recovery to a lot of devices. I'm trying to put the gome u7 on their queue, but right now, they are busy with a lot of builds.
Click to expand...
Click to collapse
As you said the bootloader can not unlock why it need TWRP for?
The phone bootloader can lock and unlock as will.
Phone in fastboot mode: ADB command "fastboot oem unlock" then Push Vol+ on the phone to confirm unlock.
But I got the boot loop to TWRP every reboot after following steps to root the phone.
fastboot flash recovery recovery.img (twrp down load at https://unofficialtwrp.com/gome-u7-twrp-3-2-root/)
Boot to recovery ( this Twrp won't save the language which selected)
Format Data
Reboot to recovery again.
Install magisk
install No verity opt encrypt.zip.
wipe Caches/Davik...
reboot to system but it boot loop to recovery (twrp).
I have to reinstall original recovery.img and lock bootloader in order for my phone to boot normal again. After the phone boot up , install magisk.apk manager to get root.
Try to flash patched boot & twrp recovery image inside rar file with SP flash tool v5.1844.00.00 use their scatter file.
Wow, my device just could'nt comunicate with the adb via fastboot. I selcted the OEM unlock on the phone and inatalled the mtk drivers.
What i did wrong?
Also, you said that you had to install the stock recovery to the phone boot again, so you dont have twrp on the phone?
kaew158 said:
Try to flash patched boot & twrp recovery image inside rar file with SP flash tool v5.1844.00.00 use their scatter file.
Click to expand...
Click to collapse
Thanks. It work great. It is so simple to make the phone root with TWRP. After flashing patched boot & twrp recovery image inside rar file then go to Recover mode, install Magisk and no-verity-opt-encrypt-6.0.
Which one is stock chinese firmware (no Google Play Store)?
https://m.youku.com/video/id_XMzQwNjg2Mjg3Mg==.html?vertical=1
Anyone try all of them?
How many difference points of them?
https://cloud.mail.ru/public/8hMx/N7fqf8X62
or
https://mega.nz/#!dU4hDCJK!5CVn7C4DTdxJv-0Y3jDIxHaKwAkq4N6RwfRwkdrHQZA
or
https://drive.google.com/file/d/11dY7QrBP1TvsoSer8v4b_d5d_MJliAMu/view
kaew158 said:
Which one is stock chinese firmware (no Google Play Store)?
https://m.youku.com/video/id_XMzQwNjg2Mjg3Mg==.html?vertical=1
Any One try all of them?
How many difference points of them?
https://cloud.mail.ru/public/8hMx/N7fqf8X62
or
https://mega.nz/#!dU4hDCJK!5CVn7C4DTdxJv-0Y3jDIxHaKwAkq4N6RwfRwkdrHQZA
or
https://drive.google.com/file/d/11dY7QrBP1TvsoSer8v4b_d5d_MJliAMu/view
Click to expand...
Click to collapse
All i know that the rom file name Gome_2017M27A_MT6757_V01_20180122.zip that Gapps File is Included.
kaew158 said:
TWRP recovery for root with magisk from 4PDA Forum.
and firmware. Gome_2017M27A_MT6757_V01 (U7_GM_00_V1.0)
And I found root guide from GOME U Series Forum. (Chinese) It is same as this website.
(I am waiting my U7 delivery too.)
Click to expand...
Click to collapse
Can you upload the rar file from the 4pda forum? Their download link is returning a 404 error . Thank you.
SkynyrdZ said:
Can you upload the rar file from the 4pda forum? Their download link is returning a 404 error . Thank you.
Click to expand...
Click to collapse
It is the same file from https://unofficialtwrp.com/gome-u7-twrp-3-2-root/
or
http://bbs.gomecomm.com.cn/forum.php?mod=viewthread&tid=20266&extra=
link
https://www.mediafire.com/file/gw83x1y8d25gg5f/Gome+U7+3.2.3.rar

[Thread doubts] OnePlus 7 chinese version [GM1900]

Hi guys, I open this thread to solve problems / doubts of this chinese version of One Plus 7 GM1900 because I guess many will be in my place.
I tell you my case:
My intention is to open bootloader to be able to put custom recovery TWRP and root it with Magisk.
Once I have it, I have doubts:
1. If I want to remove TWRP and Root, and I will leave all stock, what steps should I take?
2. If I am in OOS (for example 9.5.2) with TWRP and root and want to upgrade to a new version of OOS (for example 9.5.6), what steps do I have to follow?
3. I would like to know if this is true, and if so, what would be the solution: I have read that when a Wipe System is made from Twrp, the bootloader can be closed or that the phone does not start in fastboot mode causing a crash. Is this true?. I thought about when I wanted to install a cleaner ROM stock, make a Wipe System, data, cache and dalvik and then flash the rom, and according to that it might not be possible.
Thank you.
Hi, are these Treble GSI roms compatible with the OnePlus 7 (not pro) Chinese version GM 1900 ???
Roms Treble GSI:
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
hardware is the same, firmware also fits from EU/Indian devices. next time just use search.
tURkOsANsE said:
1. If I want to remove TWRP and Root, and I will leave all stock, what steps should I take?
Click to expand...
Click to collapse
Flash the stock ROM and reboot. You'll have a phone with stock recovery and ROM with no root access. It won't relock your bootloader though, so you'll have to do it with: fastboot oem lock
2. If I am in OOS (for example 9.5.2) with TWRP and root and want to upgrade to a new version of OOS (for example 9.5.6), what steps do I have to follow?
Click to expand...
Click to collapse
You always need to flash full ROM zips if you're rooted and want to update. However to keep the custom recovery (TWRP), you need to flash the TWRP installer along with the ROM. Then to not lose root access you'll have to reboot to TWRP and flash Magisk. Just follow these steps:
1. Boot to TWRP
2. Flash ROM
3. Flash TWRP installer
4. Reboot to TWRP
5. Flash Magisk
6. Reboot to system
3. I would like to know if this is true, and if so, what would be the solution: I have read that when a Wipe System is made from Twrp, the bootloader can be closed or that the phone does not start in fastboot mode causing a crash. Is this true?. I thought about when I wanted to install a cleaner ROM stock, make a Wipe System, data, cache and dalvik and then flash the rom, and according to that it might not be possible.
Click to expand...
Click to collapse
I haven't tried that yet. But since TWRP builds are official, I don't think there are bugs like that. Why don't you give it a try and let us all know?
@dewri21 Thank you very much for your answers, you have helped me a lot, thank you for your clear explanations, please like this, help those who are starting in this world.
dewri21 said:
I haven't tried that yet. But since TWRP builds are official, I don't think there are bugs like that. Why don't you give it a try and let us all know?
Click to expand...
Click to collapse
Hehehehe I dare not do it, I could run out of mobile phone and end up with a brick. At the moment if I want to put clean OOS I think I will use Fastboot mode. Let's see if a partner who knows how to get out of a brick does Wipe Sistem and confirms that.
FASTBOOT: https://forum.xda-developers.com/oneplus-7/how-to/rom-stock-fastboot-roms-oneplus-7-t3937478
Hi guys, I am writing to let you know that I have flashed the fastboot 9.5.6 BA ROM in my OnePlus 7 Chinese version GM 1900 and it worked perfectly. I was in TWRP, Root Margisk and Custom Kernel, and now I'm back in Stock. My device being a Chinese version came with ROM AA when removed from the box, and I confirm that the BA version can also be set up by Fastboot.
Add that as it is said, the first restart is slow, it stays a while in the warning screen of bootloader open, but it advances with the start. In my case I have not had to restore factory.
Very happy with this method to be able to return to Stock.
Hello, has anyone tried this on our OnePlus 7 to fix a brick? It seems that it is the MsMdonwloadsTools for our OnePlus 7. Someone who has a brick can try it and tell us if it works.
https://repairmymobile.in/flash/oneplus-7-flash-file/amp/
MsmDownloadTool For OnePLus 7: https://forum.xda-developers.com/oneplus-7/how-to/unbrick-tool-oneplus-7-msmtool-hydrogen-t3953240

S7 G930F stuck in a bootloop after attempt to install TWRP

Hi everyone!
I wanted to finally flash a custom ROM on my G930F (vanilla, with the latest official update) and started by installing TWRP (twrp-3.3.1-0-herolte.img.tar) via Odin (3.13.1) following this guide: https://forum.xda-developers.com/galaxy-s7/development/recovery-official-twrp-herolte-t3333770.
Everything was going smoothly until step 9, because after swiping right I tried rebooting before flashing anything (found a thread on Reddit advising to just follow the guide without proceeding with rooting as indicated in the last steps). So now I'm stuck in a bootloop and I have no idea what to do, I can only access Download mode but that's it.
How do I solve this problem?
Step 10 included scenarios for both if you want root, or if you just want to boot successfully
Did you download and flash the dm-verity and force encryption disabler zip as per the step 10?
Repeat steps 6-10 and flash that zip
Beanvee7 said:
Step 10 included scenarios for both if you want root, or if you just want to boot successfully
Did you download and flash the dm-verity and force encryption disabler zip as per the step 10?
Repeat steps 6-10 and flash that zip
Click to expand...
Click to collapse
Thanks for answering!
Yes I figured out, installed TWRP via Odin again and then tried flashing that thing without wiping as shown in the video, but then I got some error messages and the device wouldn't boot up again, telling me I had to do a wipe. So I just went into recovery and did a factory reset.
Now I'd like to flash LineageOS but I'm not so sure anymore since I've had so many problems, and I have a few questions:
Do I need to reinstall TWRP?
Do I need root?
What version of LineageOS should I download?
Is there a guide for flashing LineageOS on the S7?
trim1_ss said:
Thanks for answering!
Yes I figured out, installed TWRP via Odin again and then tried flashing that thing without wiping as shown in the video, but then I got some error messages and the device wouldn't boot up again, telling me I had to do a wipe. So I just went into recovery and did a factory reset.
Now I'd like to flash LineageOS but I'm not so sure anymore since I've had so many problems, and I have a few questions:
Do I need to reinstall TWRP?
Do I need root?
What version of LineageOS should I download?
Is there a guide for flashing LineageOS on the S7?
Click to expand...
Click to collapse
Do I need to reinstall TWRP?
No TWRP will remain until you remove it or flash stock firmware.
Do I need root?
Not required to flash custom Rom's but useful
What version of LineageOS should I download?
Look at the ROM section and read up on which one you want, there are several different ones and builds so the choice is yours.
Is there a guide for flashing LineageOS on the S7?
There is always a guide contained in the post for the ROM usually at the beginning. The process of flashing Rom's is generally the same no matter what Rom you use.

Android 11 Red Magic Rom [FLASHGUIDE]

Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!
nalin_s3 said:
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!
Click to expand...
Click to collapse
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!
Perseo99 said:
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!
Click to expand...
Click to collapse
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ??
nalin_s3 said:
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ?
Click to expand...
Click to collapse
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.
Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Can you check your pm??
There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool
jepoyxxv said:
There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool
Click to expand...
Click to collapse
I already went to 11 and flash to 3.11
But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me
jepoyxxv said:
But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me
Click to expand...
Click to collapse
If you are in 11 beta and want to downgrade..just simple flash global version and again flash 3.11 done
What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.
jepoyxxv said:
What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.
Click to expand...
Click to collapse
I just flash global from otg and tham again 3.11
walkwitmeinhel said:
I just flash global from otg and tham again 3.11
Click to expand...
Click to collapse
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.
[email protected] said:
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.
Click to expand...
Click to collapse
http://ui.nubia.cn/rom/detail/64
Oh! Didn't expect that. I just post this for Red Magic 3 device users. I don't know how RM3S actually works. Have you tried the unbrick tool from chinese version? Or just flashing the global rom from recovery is enough?
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
Let's see. Here is a link for Red Magic 3S unbrick tool. Download the non-eu ones.
If you have a Red Magic 3 with Red Magic 3s software, I will provide you the link to the other unbrick tool.
Also, you can try flashing the global rom from the stock recovery included in the package of the A11 rom that you have download.
Thanks for replying my bro.. my device is rm3s i already use rm3 and rm3s unbrick tool.. downloading fire hose programmer and image was successfully but.. my phone is still corrupted... And one thingg i dont have twrp install in my rm3s thats why its hard for me to fix it.. can you please guide or teach me how to flash stock recovery using global rom i know how to use cmd and adb
jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
So then, It's not a problem of the unbrick tool, that is actually working properly. The thing is that you didn't know how to do a correct process to migrate from cm rom to global...
The first thing you should do is reboot the phone into fastboot mode (power+vol. Down). Then, connect the phone to the PC and type the next commands in the cmd:
Code:
fastboot devices
in order to see if your device is being recognized
Code:
fastboot oem nubia_unlock NUBIA_NX629J
to unlock the bootloader
Code:
fastboot flashing unlock
in order to make your phone able to boot with a modified software. In the moment you will enter this command, you will see a screen advising you about your data (it'll be erased once you accept to unlock flashing).
After that, you can reboot your phone, that will show you an screen advising you that the bootloader is open. Accept and continue without problems.
Tell me if you have been able to make your phone boot.
Perseo99 said:
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.
Click to expand...
Click to collapse
Required in CN A10 + twrp A10, or maybe from CN A9 + twrp A9 to be able to flash

Categories

Resources