Related
I have a xolo a1000.
I installed TWRP recovery and unfortunately i inputted wrong hex in EMMC.
By the way after few retries the attempt was successful and i installed it.
Now i was unable to boot android os.
So i opened recovery menu and flashed another rom from here, http://www.needrom.com/mobile/jiayu-g3-g3n-2/
Now i'm unable to open boot menu or Android os.
Means my phone is completely fu##ed up...
Please please help me asap...
Thanks.
So desperate
pls any1 gonna help me
Can you please give more details? what do you see when you turn it on and when you connect it to the computer, does it show up anything? There's still a chance to fix it.
go to recovery mode by switching off the phone and wait for 5 sec. Now press Volume + and Power key and hold them you will enter in recovery mode and try to factory reset it.
situation
As i mentioned, i am unable to boot in recovery menu now. And when i press p[ower button,, nothing happens.
When i try to reflash recovery image in SP Flash tool it gives error
obtain dram failed
, the screenshot is attached below.
Plssssss
guys i m flashing first time my mmx a117 , after reboot recovery its show no command and dead adroid icon what should i do and no .zip option appers in flashing with (cwm/twcp)
ankitchourasia07 said:
guys i m flashing first time my mmx a117 , after reboot recovery its show no command and dead adroid icon what should i do and no .zip option appers in flashing with (cwm/twcp)
Click to expand...
Click to collapse
Because you have not installed any cwm or twrp u will get dead android logo In stock recovery. So solution is flash any custom recovery
No command
Siddhesh.K15 said:
Because you have not installed any cwm or twrp u will get dead android logo In stock recovery. So solution is flash any custom recovery
Click to expand...
Click to collapse
i already try to installed cwm/twrp by rom manager in recovery setup option but it show 'device not listed above' and asked manually clockworkmod 3.x+ or clockworkmod 2.x+ . but problem are remains same and also try goo manager but it is also not install recovery
and also try flashing with the help of pc by this link
http://forum.xda-developers.com/canvas-magnus/development/official-stock-rom-collection-t2647732
but process are not increase its still on zero %
please help me its argent because my mobile are restart so many time
ankitchourasia07 said:
i already try to installed cwm/twrp by rom manager in recovery setup option but it show 'device not listed above' and asked manually clockworkmod 3.x+ or clockworkmod 2.x+ . but problem are remains same and also try goo manager but it is also not install recovery
and also try flashing with the help of pc by this link
http://forum.xda-developers.com/canvas-magnus/development/official-stock-rom-collection-t2647732
but process are not increase its still on zero %
please help me its argent because my mobile are restart so many time
Click to expand...
Click to collapse
Download this recovery http://forum.xda-developers.com/can...t-philztouch-6-41-5-based-cwm-v6-0-4-t2758026
Put that downloaded recovery into root of the sd card (don't put it into any folder)
Then download MTK mobile uncle tools from play store
open it grant root access
then choose recovery update option click on it
after clicking on it you will see name of the downloaded recovery under recovery in sd card section DON'T GO TO RECOVERY FILE IN REMOTE ( if you have putted that into root of sd card otherwise it wont show )
click on that recovery file it wil ask to install click yes
after installation it will ask you if u want to reboot into recovery mode
That's it. THen install any rom
Hello.
I faced the same issue. But I found the fix.
While booting into recovery mode when it shows "NO command here" press 'Menu' button. It then displays option like reboot and all.
XdaPoseidon said:
Hello.
I faced the same issue. But I found the fix.
While booting into recovery mode when it shows "NO command here" press 'Menu' button. It then displays option like reboot and all.
Click to expand...
Click to collapse
When you are stuck at "No Command" screen, there is no MENU button, Canvas A1 (Android One) phones does not have physical buttons
I'm facing also this issue after flashing kernel and supersu. I'm on Marshmallow 6.0
Hi,
I'm have been trying to update from kit kat to lollipop on my acer liquid e700 phone.The tutorial said that only philz touch should be used else i would run into problems.I have been trying unsuccessfully to install easy magic installer on my mac, but i always get "sorry adb root shell is not working error",despite adb given root access and usb debugging on, and i followed some tutorials about installing and tuning adb and fast boot.Yes! and the phone is rooted.
So now i tried installing philz touch on the phone and i've downloaded the .img file and zip file and tried flashily, and that doesn't work either.When i try to download philz touch within flashily,is says checking then says 'something went wrong, please try again.I flash the .img file and it says flashed completed, do you want to boot into recovery or flash more files.I click boot into recovery, but all i see is a black screen and the phone boots back normally, no recovery.I try it with a zip file, same thing, the screen gets black and the phone reboots, no recovery.I try to boot into recovery manually, and the phone no longer does.When i click volume up to select recovery mode,it just boots up and goes into normal mode, it no longer boots into recovery.
I try rashr and it's another failure.Philz touch doesn't load during installation.
Can someone please help.
Thanks.
I have flashed TWRP 3.3.1 successfully . after that I rebooted into TWRP and it does not enter its recovery UI. After that, I tried to reboot the phone but it goes to recover screen again without entering recovery UI. I can't open my phone now. please help.
At the beginning, after flashing the twrp it was showing only TWRP screen not the options. then i rebooted the system and the phone rebooted without any issue (till now, phone was ok). then I again flashed the twrp but it remained the same. after that i tried different command from the Powershell. (fastboot boot twrp.img) and it showed downloading. after waiting for 5 min, I just closed the PowerShell and tried to reboot. from that time I cannot boot my phone anymore. then i again flashed the recovery but could not boot the phone. when i triy to boot the phone it only shows the recovery screen. I've attached the commands that I used to flash TWRP. Please help me to solve the problem.
zahidhasanzahid said:
I have flashed TWRP 3.3.1 successfully . after that I rebooted into TWRP and it does not enter its recovery UI. After that, I tried to reboot the phone but it goes to recover screen again without entering recovery UI. I can't open my phone now. please help.
At the beginning, after flashing the twrp it was showing only TWRP screen not the options. then i rebooted the system and the phone rebooted without any issue (till now, phone was ok). then I again flashed the twrp but it remained the same. after that i tried different command from the Powershell. (fastboot boot twrp.img) and it showed downloading. after waiting for 5 min, I just closed the PowerShell and tried to reboot. from that time I cannot boot my phone anymore. then i again flashed the recovery but could not boot the phone. when i triy to boot the phone it only shows the recovery screen. I've attached the commands that I used to flash TWRP. Please help me to solve the problem.
Click to expand...
Click to collapse
Have you tried booting the recovery by pressing Power + Vol up?
zahidhasanzahid said:
I have flashed TWRP 3.3.1 successfully . after that I rebooted into TWRP and it does not enter its recovery UI. After that, I tried to reboot the phone but it goes to recover screen again without entering recovery UI. I can't open my phone now. please help.
At the beginning, after flashing the twrp it was showing only TWRP screen not the options. then i rebooted the system and the phone rebooted without any issue (till now, phone was ok). then I again flashed the twrp but it remained the same. after that i tried different command from the Powershell. (fastboot boot twrp.img) and it showed downloading. after waiting for 5 min, I just closed the PowerShell and tried to reboot. from that time I cannot boot my phone anymore. then i again flashed the recovery but could not boot the phone. when i triy to boot the phone it only shows the recovery screen. I've attached the commands that I used to flash TWRP. Please help me to solve the problem.
Click to expand...
Click to collapse
Now since you are bootlooping we would need to install MIUI back again, to do this download the MiFlash Tool and the fastboot ROM for the latest MIUI, now copy it's file path and paste in MiFlash Tool, also make sure it detects your phone, now in the bottom right corner there would be an option like flash_everything_except_internal (similar to this) so that the internal storage isn't erased, now flash the ROM and let the phone boot up atleast once.
Once that's done use this TWRP (https://forum.xda-developers.com/re...unofficial-twrp-3-3-1-proper-t3933531/page4), it has a fix for the encryption bug and won't lead to a bootloop (the password/code/pattern asked in it is the same as the phone's), now you have TWRP installed and running
Thanks for your support. I followed the instruction and bootup the phone. But I'm afraid of flashing TWRP ?
It worked. I installed TWRP without any issue . Thanks again ?
TWRP 3.3.1 has bug, reinstall TWRP 3.2.3 and boot to recovery and then reboot to system.
Naveenthemi said:
Now since you are bootlooping we would need to install MIUI back again, to do this download the MiFlash Tool and the fastboot ROM for the latest MIUI, now copy it's file path and paste in MiFlash Tool, also make sure it detects your phone, now in the bottom right corner there would be an option like flash_everything_except_internal (similar to this) so that the internal storage isn't erased, now flash the ROM and let the phone boot up atleast once.
Once that's done use this TWRP (https://forum.xda-developers.com/re...unofficial-twrp-3-3-1-proper-t3933531/page4), it has a fix for the encryption bug and won't lead to a bootloop (the password/code/pattern asked in it is the same as the phone's), now you have TWRP installed and running
Click to expand...
Click to collapse
I have now flashed TWRP. But my phone isn't booting into TWRP recovery and the power button and volume UP button is booting the phone into MIUI recovery. Also when booting into the system, it's asking for a password when I had no passwords on the device. Will MiFlash Tool help in this case??
mad_hat said:
I have now flashed TWRP. But my phone isn't booting into TWRP recovery and the power button and volume UP button is booting the phone into MIUI recovery. Also when booting into the system, it's asking for a password when I had no passwords on the device. Will MiFlash Tool help in this case??
Click to expand...
Click to collapse
The password is on the phone lock screen? In that case your device must have got encrypted, you might have to format all partitions and then flash with Mi Flash.Do have a try with MiFlash first, might help if it's not encrypted. Also make sure you used the right commands to flash the recovery, and use OrangeFox or Peter's.
Hello. My device is cant go to recovery i try flashing from apk (i have magisk root installed) and ITS says flash succses i try reboot and ITS have recovery mode text on boot and after that is just blank and restart normally i try flashing again using 2nd apk and ITS says failed try in my laptop still not work so what im gonna do? My phone is turned on rn