Why everyone need camera 2 API. Miui camera is best, I test on miui 9 Google camera and it is the same. Only advantage of camera api it is possibility to write RAW file, but only some people want it
No, Gcam produces better dynamic range, better color production, less noise. In daylight difference not that big but especially in low light gcam is far better. Only bad thing on gcam you have to wait too long for shoot a photo. Also stock camera on selfies is literally garbage, doesn't use all capabilities of the sensor.
No, Google Camera is absolutely better, especially on the night photos :highfive:
I not tested front camera on camera 2 API.
Back camera is near the same imo
Gcam generally produces better images, the result is worth the added processing time. Portrait selfie is a lot damn sharper and that one is nowhere MIUI camera can touch.
Guys, join the petition on the official MIUI forum. Here's the link, we want our Camera2 API back on our Mi Note 3!!
http://en.miui.com/thread-3737375-1-1.html
Done
Config about Camera from Miui 10 has difference from Miui 9 which Mi 10 has not Level 3 but Mi 9 has config Level 3
you can install app name : camera2 Probe and droid hardware info from play store to check your config
So we are staying with miui 9 until xiaomi unlocks this?
Gcam 7.4 by Parrot043 is out and it work fine on Realme X2.
You can see the Full Review below but let me give Deeper thoughts there after.
First look at the interface, Gcam 7.4 looks like Gcam 7.3 but when you look closely, the best things about Gcam 7.4 is more of cleaner rearrangement of the UI and the refinement of some important functions, like the FHD/4K Video recording toggle inside the video swipe down menu
View attachment 5067213
This goes through the whole swipe down menu for all the camera modes. Short cuts of useful features has now been added to the swipe down menu making it very easy and useful in all the swipe down menu.
Let's loonat indoor shots
INDOOR SHOTS
Indoor lowlight shots looked great, more refined as you can see below. Color accuracy, rich, good saturation, noise reduction etc it's quite a great refining of what Gcam 7.3 already produces.
View attachment 5067203
View attachment 5067205
View attachment 5067207
View attachment 5067209
View attachment 5067211
The images were compressed down to 75% so you might have to watch the video Gcam 7.4 Full Review
To get the full quality details.
NIGHT SHOTS
There is some refinement on the night sight.
Below is picture taken in the midnight, first with normal camera mode, then 2 Secs of Night sight and then Astrophotography.
View attachment 5067201
View attachment 5067197
View attachment 5067195
This is the first port V1 and it's for Android 10 + Devices.
I also noticed that a lot of features and advanced settings has yet to be ported to this Version one but as usual, Parrot043 do port features with more version release.
Good to know that 4K (30fps) works well.
ANY ISSUES?
Yes, Portrait mode and HDR produces Raw looking images as seen in the Pic below.
View attachment 5067199
Download Gcam 7.4 here
And check it out.
Watched the video on YouTube for a detailed analysis by you of the app few days ago. Impressed by the astrophotography shot and its comparisons.
hmm parrot night shots is not good compare to urynyx or other gcam?
Can you provide me a backup apk of realme x2 stock camera? I wanna do a comparison between them but I'm in Corvus ROM and it's not installed by default.
giovann134 said:
Can you provide me a backup apk of realme x2 stock camera? I wanna do a comparison between them but I'm in Corvus ROM and it's not installed by default.
Click to expand...
Click to collapse
you cant port stock cam in any custom rom
Video to 4k close
I like 7.3 so much!
Is it possible to have 7.4 for Android 9?
Difference
you know what's the different when we downloaded the apk parrot provide atleast two, one original and one with clone apk. Can you tell me what the different? is it clone was already setting for us?
when change video res to 4K, it crashes and app shuts down
Dear Friends & Developers,
Not sure if this meant to be for realme xt phones or not, I installed it.
It works great except when I change the video res to 4K, app shuts down, whereas it works in full hd .
I was wondering if it can be fixed.
because I enjoy other functions of the program and I appreciate very much for the hard work.
I hope you fix it so that I could use your program rather than the phones default cam which takes 4K videos without any problem
all the best
is the video down?
Hi,
For those with the POCO X3 Pro, what is the best GCam that is currently available to use - most stable, with better quality, etc....
I have tested some GCams from X3 NFC, but is a shot in the dark - some work, but i think is room to improve in the quality (could be some settings/configs too).
Maybe someone here found a specific one that works better
EDIT: This is my opinion after a few months: https://forum.xda-developers.com/t/gcam-for-x3-pro.4256287/page-12#post-86486777
I also hope to have a good GCam soon. While Stock Cam seems good for video, I'm not happy with the photo quality: there seem to be some aggressive "beautify" settings and filters I could not deactivate yet. At least with my Redmi Note 7 on crDroid and GCam 7.4 I'm able to make much more satisfying photos.
ChriMo said:
I also hope to have a good GCam soon. While Stock Cam seems good for video, I'm not happy with the photo quality: there seem to be some aggressive "beautify" settings and filters I could not deactivate yet. At least with my Redmi Note 7 on crDroid and GCam 7.4 I'm able to make much more satisfying photos.
Click to expand...
Click to collapse
The main camera is good, but of course GCam is always better
I have tested some Gcam versions and they seem to work - most only for photos and there still tweaks to be done... For vídeo yeah, don't use GCam at all.
But maybe someone found a config/version that works best
Since X3 Pro has the IMX582 main sensor I looked which other devices (from Xiaomi) have the same - see on deviceranks.com:
POCO M3 - xda GCam thread (Nikita 7.4.104 and Wichaya 1.8.3 mod dicussed)
XIAOMI MI 9T / XIAOMI REDMI K20 - xda GCam thread (URNYX) - GCam MIUI thread (Urnyx, Parrot with config hidynamic v12)
XIAOMI REDMI K40
Will try later.
I'm trying this:
NGCam_7.4.104-v2.0_eng.apk
drive.google.com
And it is working properly, thanks @ChriMo
sergiota23 said:
I'm trying this:
NGCam_7.4.104-v2.0_eng.apk
drive.google.com
And it is working properly, thanks @ChriMo
Click to expand...
Click to collapse
This works like a charm!
Is even possible activate the extra sensors in the "Advance" setting. We can use the deph sensor, macro, wide and (of course) main sensor
Nice. I installed NGCam_7.4.104-v2.0_cam.apk (com.ngcam.camera) which should allow to try other GCams alongside. Here is the Nikita folder @ celsoazevedo - he already works on the 8.1 version.
The 7.4.104 version so far seems to work fine also for me. Unfortunately in the Config directory I could not find any model with the same main sensor, as I would expect some optimization might be possible.
I plan to compare to the Redmi Note 7 GCam pictures in the same conditions to have a comparison. I was strongly hoping the 48 MP IMX582 Exmor RS would provide at least the same experience as the 48 MP ISOCELL GM1 in the RN7, at least deviceranks.com lists it slightly better (#32 vs. #39). So far I'm not sure but still hope the combination with the powerful CPU allows a good experience. With my RN7 beside Night Pictures I'm pretty happy.
Some quick test NGCam 7.4.104 v2.0 VS Stock cam app.
This is just a quick test, no config, just shots after install.
Stock:
https://imgur.com/vdkIM7X
NGCam:
https://imgur.com/DVtp9ax
NGCam (HDR+):
https://imgur.com/w7My0RE
Night Mode:
Stock:
https://imgur.com/s8Oitgf
NGCam:
https://imgur.com/MSaqmjF
Second Test Night Mode:
Stock: https://imgur.com/Kl1NzM7
NGCam: https://imgur.com/tksbAZV
Of course, night mode is still the best using NGCam.
But i actually prefer the Stock camera for regular photos - more saturated colors, but NGCam have more natural tones.
I downloaded the Gcam below and it works out of the box!
BSG: MGC_8.1.101_A9_GV1zfix
Download MGC_8.1.101_A9_GV1zfix by BSG.
www.celsoazevedo.com
In the Telegram Poco X3 Photography group
a) member Park Q claims Marco's 7.3_GCam_MJL_v4.3_Minilux.apk (2020-08-31, oneplus 6/6t) is optimized for 582 and 586 sensor. He has also posted two configuration XML files (Flat & Zoom)
b) member Team XKlaus claims MGC_8.1.101_A9 (BSG, 2021-03/04) allows 4k @ 60fps
Searching for "IMX582 celsoazevedo" I found the following:
UltraCVM_v4.apk (UltraM8, 2020-05-10, configs)
UltraCam_3.2.3.apk (UltraM8, 2020-02-19, configs)
UltraM8 bases off Urnyx05 or Arnova8G2 versions with additions and tunings ... with main focus on the IMX586 sensor (primary device Xiaomi Mi 9T Pro).
In Config Files for burial's GCam 7.2.x there is Xiaomi Mi A3 » mi-a3-x.j.b.-ver.1.xml which contains the string: Main Sensor: IMX582 (same as IMX586 without 4K and Stab
(Xiaomi Mi A3 has Sony IMX586 Exmor RS)
I need to look into this but share so we may find some basic optimization based on existing IMX582(586) configs what GCams might be good.
Just to clarify my focus:
a) good natural daylight main cam pictures (no oversharpening, no oversaturation, etc.)
b) 1080p 24fps EIS ExtraSmooth (Steady) Videos (no refocus, no pumping, no artefacts) possibly with UltraWide for less crop
c) Special Features like 1) Time Lapse 2) Slow motion 3) Night etc.
d) 4k 24fps EIS as good as possible like 1080p
I made a GSheet comparison: https://docs.google.com/spreadsheet...kpsmnix1jUWCr2SMdPl_wprc8/edit#gid=1775206814
ChriMo said:
Nice. I installed NGCam_7.4.104-v2.0_cam.apk (com.ngcam.camera) which should allow to try other GCams alongside. Here is the Nikita folder @ celsoazevedo - he already works on the 8.1 version.
The 7.4.104 version so far seems to work fine also for me. Unfortunately in the Config directory I could not find any model with the same main sensor, as I would expect some optimization might be possible.
I plan to compare to the Redmi Note 7 GCam pictures in the same conditions to have a comparison. I was strongly hoping the 48 MP IMX582 Exmor RS would provide at least the same experience as the 48 MP ISOCELL GM1 in the RN7, at least deviceranks.com lists it slightly better (#32 vs. #39). So far I'm not sure but still hope the combination with the powerful CPU allows a good experience. With my RN7 beside Night Pictures I'm pretty happy.
Click to expand...
Click to collapse
I've tried to play with the configuration. I'm not a pro, first time I play with a GCam mod.
If anyone wants to test and share thoughts...
BtB said:
I've tried to play with the configuration. I'm not a pro, first time I play with a GCam mod.
If anyone wants to test and share thoughts...
Click to expand...
Click to collapse
Does it incorporate the sensors used in x3p?
saudahmedbass said:
Does it incorporate the sensors used in x3p?
Click to expand...
Click to collapse
You can use the 3 sensors, but only found in settings the main one havng specifc support.
I'm not sure what's the benefit though...
As I said, I'm a kind of newbie here So I tried to configure things to what made sense to me, like enabling pixel bining, but some might prefer to disable it to have pics with better definition...
Happy to hear feedback and suggestions, if we get a good xml file we could post it on Nikita folder @ celsoazevedo
In the Telegram Poco X3 Photography group there are a lot of XML files now mainly for
MGC by BSG (preferred by most it seems)
NGCam by Nikita
User P.A. likes CamStellar
Another user (can't find the post) stated Arnova is working on X3P optimization.
Preview of pics might only work after you change gallery settings in options.
Member Park Q, Suresh Dreamer and others stated that the basic color balance / white balance setup in the Xiaomi Firmware is bad and can not be fixed with GCam+XML or even with RAW. I also noticed a slight magenta shift/tint in pics (less in videos), which seems less "natural" then on my other smartphone cams. So with vidoes I'm happy, with Pics I have not found yet a "natural" outcome.
I have this version: https://www.celsoazevedo.com/files/android/google-camera/f/changelog1500/
It is optimized for IMX582 sensor: Everything works perfectly. The best config is: (damm10-best-mi-9t-v4.xml)
You can find it under the link to Xiaomi Mi 9T / Redmi K20, which have the same sensor as Poco X3 Pro.
Config Files for Urnyx's GCam 7.3.x
Stable settings for Urnyx's GCam 7.3.x with xml config files support.
www.celsoazevedo.com
Rigveda86 said:
I have this version: https://www.celsoazevedo.com/files/android/google-camera/f/changelog1500/
It is optimized for IMX582 sensor: Everything works perfectly. The best config is: (damm10-best-mi-9t-v4.xml)
You can find it under the link to Xiaomi Mi 9T / Redmi K20, which have the same sensor as Poco X3 Pro.
Config Files for Urnyx's GCam 7.3.x
Stable settings for Urnyx's GCam 7.3.x with xml config files support.
www.celsoazevedo.com
Click to expand...
Click to collapse
According to guys on Telegram, this is not on par with other ports.
NGCAM is still seen as best overall (especially in low light), MGC being a bit more natural in colors in good light conditions.
If some people are not on Telegram and want to get the XML files for NGCAM and MGC, they can be shared here too.
BtB said:
According to guys on Telegram, this is not on par with other ports.
NGCAM is still seen as best overall (especially in low light), MGC being a bit more natural in colors in good light conditions.
If some people are not on Telegram and want to get the XML files for NGCAM and MGC, they can be shared here too.
Click to expand...
Click to collapse
I tried different versions, including NGcam, and in each of them something didn't work and the application crashed. I'm really happy with this version, because it works without any problems and is very stable, including video. There are not unnecessarily many settings as in the new versions, which the average person does not understand anyway and was directly optimized for Redmi K 20 (40) and Mi 9T, which have the same sensor as Poco. Night mode also works great and the quality of the photos is much better than with stock cam. Just a minor edit: After trying different settings, I think, the most universal config I have the best experience with under different conditions, is this: AIO-Mevcetin-Urnyx05.xml
If someone wants to have the latest version, it's ok, but unfortunately at the cost of lower stability.
Rigveda86 said:
I tried different versions, including NGcam, and in each of them something didn't work and the application crashed. I'm really happy with this version, because it works without any problems and is very stable, including video. There are not unnecessarily many settings as in the new versions, which the average person does not understand anyway and was directly optimized for Redmi K 20 (40) and Mi 9T, which have the same sensor as Poco. Night mode also works great and the quality of the photos is much better than with stock cam. Just a minor edit: After trying different settings, I think, the most universal config I have the best experience with under different conditions, is this: AIO-Mevcetin-Urnyx05.xml
If someone wants to have the latest version, it's ok, but unfortunately at the cost of lower stability.
Click to expand...
Click to collapse
No issue if you prefer that build of course, was just trying to brdige discussions between Telegram and XDA
One clarification as well, I've not seen anyone trying to race for latest version, all comments are around functionalities and picture qualitiy.
Btw, MGC now has new XML with EIS enabled.
I like the "steady video" function in the Stock Cam v4.3 because it is very smooth even if with substantial crop.
GCam MGC 8.1.101 lets select from four video stabilisation modes: Standard, Locked (2xZoom), Active, Cinematic Pan (1/2 Speed muted) but none seems similar to Stock steady.
So I am seeking for a GCam which has similar smooth steady EIS as Stock.
For Photography because the lack of serious and comprehensive comparisons I'm still undecided what I prefer: Stock. MGC or another GCam. MGC at least seems to be the more "natural". NGC (haven't tried myself) seems to be better in low light but does color boost/saturation.
BtB said:
No issue if you prefer that build of course, was just trying to brdige discussions between Telegram and XDA
One clarification as well, I've not seen anyone trying to race for latest version, all comments are around functionalities and picture qualitiy.
Btw, MGC now has new XML with EIS enabled.
Click to expand...
Click to collapse
That's the GCam version I prefer to use anyway, thanks for the update. I would like to try out the XML, but it's not available on the MGC's download page.
Hello guys, I want to install arrow rom, but it doesn't have miui camera, so I tried to find ANX camera for poco x3 pro but I couldn't find any, is there any way to install miui camera on arrow rom?
Thanks in advance
There is no fully working anx camera as of now afaik
GCam development with BSG 8.1 and various XML and Libs (alternative NGCam for Selfie/Dark) is at a good state. Most insiders wait for the release of the Arnova GCam for PX3P (curently in closed beta). I'm looking for GCam Video EIS as smooth as Stock Cam Steady Video. So far found no GCam able to achieve that. if possible I will move away from MIUI debloated to crDroid.
ChriMo said:
GCam development with BSG 8.1 and various XML and Libs (alternative NGCam for Selfie/Dark) is at a good state. Most insiders wait for the release of the Arnova GCam for PX3P (curently in closed beta). I'm looking for GCam Video EIS as smooth as Stock Cam Steady Video. So far found no GCam able to achieve that. if possible I will move away from MIUI debloated to crDroid.
Click to expand...
Click to collapse
You know MIUI will restrict other apps performance by default right?
Video and Photo requires a lot of calculations and adjustments.
So for GCam to be steady on MIUI, you have to go to "Game boost" and then add GCam into the "game" list. This way, GCam can use the spec of the MIUI phone in better performance.
You may want to try it as in this guide: https://forum.xda-developers.com/t/unleash-performance-in-miui.4276791/
@pl1992aw thank you very much. I suspected battery saving actions like freeze in background etc. but not that the performance of Apps in the foreground will be heavily limited. So this is new to me as this is the first time I use MIUI for a longer time and daily use.
I did add all GCams to Security > Game Turbo but did not notice a huge improvement in MGC by BSG 8.1.101 EIS - however it is difficult to reproduce videos with the same "shakiness" when not having two PX3P connected. The Stock Cam Steady Video seems still considerably "smoother" when walking the same path. For pictures and everything else I would gladly move to a CustomROM (favorite crDroid)
Hello all!
I have an S10E Snapdragon running LineageOS 18.1 (ROM is beyond0qlte).
Wondering which gCam & config file works the best for you. I'm just looking for something that works and produces a decent photo. Currently, the version I'm using, MGC by BSG v8.1, seems to take okay pictures but the front camera does not work. I think this has something to do with a libpatch? The many Telegram threads, which I am appreciative of, are very confusing on how to accomplish this.
Thanks for your help!!
I use this version of gCam with the configs applied to it on the G9700 with PE12.1.
All three cameras work. But:
1. There is no possibility to shoot video in 60fps
2. It is not possible to switch between wide and ultra wide when shooting a video
The picture quality is not perfect, sometimes you want a little more sharpness or focus.
One more GCam mod
Nice work on G9700 with PixelExperience 12.1
60 fps video works on stock