Database Info

apps greyed out after installing android pay?

As title says. I installed android pay. I went through the setup which changed an nfc setting from sim card to processor. Then I restarted my phone. About 6 apps are missing. If I go to settings/ application manager/All. I can see them there but they are greyed out with an SD symbol above them.
Annoyingly this includes "suoersu". Android pay doesn't work with root so I was hoping to turn root off temporarily. I can't uninstall supersu, install it from the playstore or from apk. I can't even install other versions like superuser etc.
Any idea as to what's going on greatly appreciated.
It's a galaxy S5 with xtrestolite rom.

lgg2flash said:
As title says. I installed android pay. I went through the setup which changed an nfc setting from sim card to processor. Then I restarted my phone. About 6 apps are missing. If I go to settings/ application manager/All. I can see them there but they are greyed out with an SD symbol above them.
Annoyingly this includes "suoersu". Android pay doesn't work with root so I was hoping to turn root off temporarily. I can't uninstall supersu, install it from the playstore or from apk. I can't even install other versions like superuser etc.
Any idea as to what's going on greatly appreciated.
It's a galaxy S5 with xtrestolite rom.
Click to expand...
Click to collapse
Why don't you simply clean install the rom again? For using android pay you can try using Magisk and SuperSU systemless mode.

Thanks for the reply. I will give magisk a go.
This phone is my work phone and also has lots of photos and video pf my kids. I think it's all backed up but I always lose something when I reflash. Currently apps that were granted root in the past still have it so not a big issue yet. Xposed is missing tho so I won't be able to update modules. If that bugs me enough I may have to reflash rom. It has been smooth for 2 years at least. Probably due for a refresh. Maybe even a new phone.

MobileIron / Banking apps with Xposed and Root

Hello everyone I currently have an issue to install some banking apps and MobileIron.
I cant use google pay, postfinance TWINT and Mobileiron (because of root getting detected or not passing safetynet or xposed.)
I am not passing Safetynet unless I check "only use core functions" in magisk.
I am hiding MobileIron with MagiskHide and I am also hiding Xposed Installer from MobileIron with suhide.
I already tried having another app block root and xposed detection for MobileIron (uncheck)
What can I do to get it to work?
Please don't tell me to just "unroot" or go back to stock.
Have a great day!

Uninstall xposed , Nothing else i can say

I now the issue well with Postfinance Twint on my rooted Samsung Galaxy S5.
Uninstalling xposed will show no effect, because your phone is locked with a root detection. The only solution I've found was to install the old version 1.1.16.0, the last version before root detecting. This works fine for me (except the QR-Scanner which shows "Error 13: The Scandit SDK license validation failed", but you can use the code input instead).
If someone knows a better solution: post it!

Reading this I stopped my thoughts about rooting. I'm using many banking apps, most of all SEQR for nfc payments. I see myself running into problems getting my finance apps to work once rooted...

lucajasonmiani said:
Hello everyone I currently have an issue to install some banking apps and MobileIron.
I cant use google pay, postfinance TWINT and Mobileiron (because of root getting detected or not passing safetynet or xposed.)
I am not passing Safetynet unless I check "only use core functions" in magisk.
I am hiding MobileIron with MagiskHide and I am also hiding Xposed Installer from MobileIron with suhide.
I already tried having another app block root and xposed detection for MobileIron (uncheck)
What can I do to get it to work?
Please don't tell me to just "unroot" or go back to stock.
Have a great day!
Click to expand...
Click to collapse
did you try "Hide Magisk Manager" option in Magisk Manager?
maybe your bank app is looking for Magisk Manager package too.
I'm not using app that you mention but you can try .

No problems with new version 2.0.20.0 (PostFinance Twint) on rooted Samsung Galaxy S5

I had a similar problem with my banking app. I solved it by installing island app. It basically creates an "island" where you can separate specific apps from the rest of your phone apps. When I put my banking app in the island it worked perfectly (also used magisk hide).
You'll have two versions of the same app when you do this. Just remember to always run the island version of the app not the normal version. There will be a small icon indicating which is which.
Hope it works with you!

lo2ay said:
I had a similar problem with my banking app. I solved it by installing island app. It basically creates an "island" where you can separate specific apps from the rest of your phone apps. When I put my banking app in the island it worked perfectly (also used magisk hide).
You'll have two versions of the same app when you do this. Just remember to always run the island version of the app not the normal version. There will be a small icon indicating which is which.
Hope it works with you!
Click to expand...
Click to collapse
Even with the island app, tez app is not working.

Can't successfully hide root with magisk 18.1 for square reader app

I've been rooting my Android phones since about 2012, but today I got a point of sale card reader for my business and I'm not having any luck hiding root from the app (square reader app). The app wont work at all so I tried a number of options in magisk manager (magisk hide the app, hide magisk manager, enable core mode only) rebooting between each try and clearing the square reader app data and setting it up fresh each time, but still no luck
I tried to uninstall magisk but the app still didn't work. So I eventually flashed back to stock and got rid of magisk all together, now the app works but I don't have root...
I tried installing magisk again after I got the app to work and hiding root from the app before I opened it up again, but it still somehow knew the device was rooted
Can anyone suggest anything I haven't tried? Or is there an alternative to rooting the OnePlus 6 (other than magisk) and hiding root? I had a bit of a look around but didn't find anything.
Thanks

I had to go back to 18.0, heard 18.2 works as well.

qbanlinxx said:
I had to go back to 18.0, heard 18.2 works as well.
Click to expand...
Click to collapse
Thanks for your reply. I tried with 18.0, damn, it still doesn't work, it still picks up that the phone is rooted
I tried the 18.2 canary build as well (18.2-e72c6685) no luck either
This app must be looking somewhere out of the ordinary for evidence of root in the phone

I have a bank application and facing the same problem. Hope someone can help us to make applications run by hiding the root
I think recent applications are looking for if knox security is tripped !! so in this case Magisk will not help

Ooohhh had to subscribe to this as I face the exact same issue!! Been trying to get my Square reader to work for a while with root and could never figure out how they are detecting root. Using Pixel XL here

Google changed something in Safety Net in play services, it passes, yet for me, google pay fails. That COULD be the issue, though I read 18.2 fixes that. Another option I helped a friend with is if it's detecting magisk itself via the files, culprit here was pokemon go.
Try opening your Magisk settings, the tick "hide magisk manager" clear the repo cache, and rename or delete the MagiskManager folder on the root of your storage. Reboot, clear data from the square app, and try again. Keep in mind, you have to unhide magisk to update it.

Skreelink said:
Google changed something in Safety Net in play services, it passes, yet for me, google pay fails. That COULD be the issue, though I read 18.2 fixes that. Another option I helped a friend with is if it's detecting magisk itself via the files, culprit here was pokemon go.
Try opening your Magisk settings, the tick "hide magisk manager" clear the repo cache, and rename or delete the MagiskManager folder on the root of your storage. Reboot, clear data from the square app, and try again. Keep in mind, you have to unhide magisk to update it.
Click to expand...
Click to collapse
In my case, I dont think its detecting the files. The reason i say that is because I play Pokemon Go just fine with no issues. So whatever Square is doing, its something different then what PoGo is doing.

Idledev said:
In my case, I dont think its detecting the files. The reason i say that is because I play Pokemon Go just fine with no issues. So whatever Square is doing, its something different then what PoGo is doing.
Click to expand...
Click to collapse
I agree, I have no problem hiding magisk and root from other apps, the square reader app must be somehow different. I've even gone through my storage and deleted any files or folders that might suggest the phone is rooted, but still no luck...
I also went into battery optimization settings to stop magisk from being put to sleep (which might stop magisk hide from working..?), that didn't work either.
I've found a temporary workaround to my problem anyway, I realized that I can share my internet (wifi hotspot) with my ipod touch, this way square reader works as the ipod touch isn't jailbroken or modified. It just means I have to carry around my ipod touch with me, which is a better trade off for me than having a stock, non root phone

Managed to get it working today! Upgraded my Pixel XL to the Android Q beta. By doing this, I had to run Magisk canary build. Installed square, enabled Magisk hide, rebooted and it worked fine! Not sure if the Android Q beta has anything to do with it,but give the canary builds of Magisk a try

Idledev said:
Managed to get it working today! Upgraded my Pixel XL to the Android Q beta. By doing this, I had to run Magisk canary build. Installed square, enabled Magisk hide, rebooted and it worked fine! Not sure if the Android Q beta has anything to do with it,but give the canary builds of Magisk a try
Click to expand...
Click to collapse
That's awesome! What canary build did you use?
I tried the latest build a few weeks ago and it didn't work for me

Build 18120

Idledev said:
Build 18120
Click to expand...
Click to collapse
No luck for me...
I updated to the latest canary build, cleared all data from square reader app, selected magisk hide, rebooted the device. After it booted up I tried to run it and it still detected root. I have a feeling that the OnePlus OS does something that doesn't totally allow me to hide root from the square reader app. It's annoying because for other apps root can be hidden
Maybe there's something in the Android Q build that lets you hide root better

Something that seems reliable right now on 18.1, Pixel Experience and OOS :
Combine Magisk Hide with Magisk "Core Mode". This seems to do the trick for now, Google Pay is triggered with normal mode, but works in Core Mode. Same for Snapchat and banking apps like N26.
But within this, you can't use any module.
kage00 said:
I also went into battery optimization settings to stop magisk from being put to sleep (which might stop magisk hide from working..?), that didn't work either.
Click to expand...
Click to collapse
This is always a good idea, on OOS at least, Magisk being optimized sometimes prevents the granting of root rights to apps, it never reacts to kernel applications requesting root on startup for example.

There's an issue with Googlypay services apparently. You need to downgrade it (remove factory updates) so it's down to version 14.something and then it should work.
You need to disable admin rights and background data to try to prevent autoupdates as well. This thread may be useful?
https://forum.xda-developers.com/ap...e-pay-magisk-discussion-t3906703/post79155616

DaveW1972 said:
There's an issue with Googlypay services apparently. You need to downgrade it (remove factory updates) so it's down to version 14.something and then it should work.
You need to disable admin rights and background data to try to prevent autoupdates as well. This thread may be useful?
https://forum.xda-developers.com/ap...e-pay-magisk-discussion-t3906703/post79155616
Click to expand...
Click to collapse
Hmm, I'm running the magisk xXx ROM and google pay is completely debloated/removed. when I get a spare half hour I might try removing the xXx module and flashing back to stock and following the advice in that thread. I'll let you know how it goes

kage00 said:
Hmm, I'm running the magisk xXx ROM and google pay is completely debloated/removed. when I get a spare half hour I might try removing the xXx module and flashing back to stock and following the advice in that thread. I'll let you know how it goes
Click to expand...
Click to collapse
Ummm yeah.. then the problem doesn't lie within Google pay it lies within the modifications that you are using.
I have to say I have never had any issues with Google pay or Android pay or any banking app using magisk. I don't even have to hide anyting. Of course I'm also not using any modified ROMs or kernels either

Hi guys,
I have this issue for a couple years now and I just cannot find a solution!
Google Pay, and 4 banking app from two different countries work fine with my 1+6 (stock ROM OOS 9.0.9 with magisk 19.4 - 7.3.4) but Square does not.
Did anyone find a solution?
Magisk config:
Magisk hide
Two modules OOS phone record and youtube
No core mode
All banking app and Square hidden

Question Samsung pay with a root Samsung

Hi,
I have one root Z flip 3 and I can pair it without problems with my galaxy watch 4, the problem is when I try to add one card to samsung pay through the Watch plug in, whenever i try to do all works fine until the last moment when the watch disconnect from the phone. I have tried this with other phones and with my own Z flip without root and It works.
Maybe, someone in the forum have found a way to make it work.
Thank you.

Samsung Pay is secured by Knox.
[Guide]Use Samsung Pay and Knox on your Rooted device
WARNING THIS IS A WIP AND SO FAR NO ONE HAS CONFIRMED THIS WORKING Samsung pay and Knox is working after Rooting. How is this possible?:confused: well, The loophole here is both Samsung pay and Knox apps check the kernel for knox status...
forum.xda-developers.com

blackhawk said:
Samsung Pay is secured by Knox.
[Guide]Use Samsung Pay and Knox on your Rooted device
WARNING THIS IS A WIP AND SO FAR NO ONE HAS CONFIRMED THIS WORKING Samsung pay and Knox is working after Rooting. How is this possible?:confused: well, The loophole here is both Samsung pay and Knox apps check the kernel for knox status...
forum.xda-developers.com
Click to expand...
Click to collapse
Yes I know but i want to use samsung pay on the watch not in the phone, i was able to use it with knox tripped but not when magisk is installed.

Zoidben said:
Yes I know but i want to use samsung pay on the watch not in the phone, i was able to use it with knox tripped but not when magisk is installed.
Click to expand...
Click to collapse
Try to hide the watch app with magisk hide, and Spay too

Rick_BR said:
Try to hide the watch app with magisk hide, and Spay too
Click to expand...
Click to collapse
I have already done that if not I couldnt even open the app of the Spay watch plugin, i dont know what can be the problem

Ive used Samsung Pay on my Pixel 2XL for over 6 months now using my Active 2, until i just swapped to the Watch 4 and can use Google Pay easily, yay
How i setup Samsung Pay (using Active 2) :
* Magisk (i still prefer older Magisk - Alpha 31 to be exact - last build before John started removing MagiskHide etc - and yes it stillworks on Android 12)
* MagiskHide Enabled - checked to pass SafetyNet
* Rename Magisk app (from settings)
* Tick apps in MagiskHide: All Samsung related apps, including watch plugins
Added modules after the above:
* Riru
* Riru-MomoHider (my mod to add all 4config options - note later Magisk builds may or not allow Riru, and if they do, some may not allow all Riru-MomoHider config options - best to check in main Magisk thread if you use the latest/bleeding edge)
The Riru/Riru-MomoHide setup will give you greater process isolation than MagiskHide itself....
Attached:
*Magisk - Alpha 31 (apk, you can sideload this apk from TWRP, TWRP doesnt care its not named as a zip, only its content- sideload apk, reboot then install the apk, as the flashed apk only installs the stub Magisk Manager, and you dont want it grabbing the latest Magisk Manager from the interwebs at the moment...)
*Riru (Riru must be installed first, and a reboot performed before adding Riru-Momohider)
*Riru-MomoHider (my mod with 4 config options set at module install, instead of having to manually do it)
Bonus info:
If youre a regular ROM flasher, you'll want to keep your watch connection and Samsung Pay working across flashes, i have a guide for that in my signature, basically involves keeping the same Android ID across flashes. I need to update it for Android 12, which ill do over the weekend...the Android ID changer app i use on Android 11 doesnt work on 12...
Note: Magisk Alpha 31 referenced in above post removed from post as its quite old now.....use either Official Magisk (details in my following post down the page) or Magisk Delta (and the modules from this post)

73sydney said:
Ive used Samsung Pay on my Pixel 2XL for over 6 months now using my Active 2, until i just swapped to the Watch 4 and can use Google Pay easily, yay
How i setup Samsung Pay (using Active 2) :
* Magisk (i still prefer older Magisk - Alpha 31 to be exact - last build before John started removing MagiskHide etc - and yes it stillworks on Android 12)
* MagiskHide Enabled - checked to pass SafetyNet
* Rename Magisk app (from settings)
* Tick apps in MagiskHide: All Samsung related apps, including watch plugins
Added modules after the above:
* Riru
* Riru-MomoHider (my mod to add all 4config options - note later Magisk builds may or not allow Riru, and if they do, some may not allow all Riru-MomoHider config options - best to check in main Magisk thread if you use the latest/bleeding edge)
The Riru/Riru-MomoHide setup will give you greater process isolation than MagiskHide itself....
Attached:
*Magisk - Alpha 31 (apk, you can sideload this apk from TWRP, TWRP doesnt care its not named as a zip, only its content- sideload apk, reboot then install the apk, as the flashed apk only installs the stub Magisk Manager, and you dont want it grabbing the latest Magisk Manager from the interwebs at the moment...)
*Riru (Riru must be installed first, and a reboot performed before adding Riru-Momohider)
*Riru-MomoHider (my mod with 4 config options set at module install, instead of having to manually do it)
Bonus info:
If youre a regular ROM flasher, you'll want to keep your watch connection and Samsung Pay working across flashes, i have a guide for that in my signature, basically involves keeping the same Android ID across flashes. I need to update it for Android 12, which ill do over the weekend...the Android ID changer app i use on Android 11 doesnt work on 12...
Click to expand...
Click to collapse
Anyone tried this on S22 Sandragon Variant, Android 12?

Gymcode said:
Anyone tried this on S22 Sandragon Variant, Android 12?
Click to expand...
Click to collapse
My post is not current except if you are using the (recent) unofficial Magisk Delta, which still has MagiskHide as an option, Delta can be found here:
[Discussion] Magisk Delta - Another unofficial third-party Magisk fork
This is not an officially supported topjohnwu project. If you are looking for official Magisk source, please go to this page Introduction Custom Magisk fork by HuskyDG. Sync with official Magisk adding back MagiskHide...
forum.xda-developers.com
For mainstream/official Magisk, you should use Zygisk:
* Magisk 25.x
* Zygisk Enabled
* Rename Magisk app (from settings)
* Tick apps in Deny List: All Samsung related apps, including watch plugins
* DenyList Not Enforced (shamiko will handle this)
Added modules after the above:
* shamiko
all required files can be found in page 1 of this thread:
[Discussion] Magisk - The Age of Zygisk.
This is a discussion and help thread for the newer versions of Magisk. The main goal of this thread is to help users migrate to Magisk v24+ SafetyNet Basic integrity Pass CTS profile match Pass Play Protect certification Device is certified...
forum.xda-developers.com
As an alternate to shamiko, you can also try DenyList Unmount
GitHub - mywalkb/DenylistUnmount
Contribute to mywalkb/DenylistUnmount development by creating an account on GitHub.
github.com
As for "has anyone tried it?", if you have already rooted with Magisk, then simply try it....waiting for some other random person to do something isnt my 1st thought process....magisk is systemless and you cant really hurt anything...

[Magisk] Google wallet (pay) with magisk

Saw on reddit that some people have issues with google pay, since the new update added some new checks. So here is what you do:
- Update Magisk to 25.2, Update magisk app to 25.2 as well
- Rename Magisk app if you havent already
- [ OPTIONAL ] Add all google apps on deny list (good practice in case google wants to detect root throught their other apps)
- install these modules: https://github.com/Magisk-Modules-Repo/MagiskHidePropsConf and https://github.com/kdrag0n/safetynet-fix
- then:
step 1.) Download any terminal (I use termux)
step 2.) type SU
step 3.) type props
step 4.) edit device fingerprint
step 5.) follow the onscreen promt
step 6.) once successfully changed, reboot device
optional (i didnt have to but you can try) reset google play, play services and google wallet appdata.
step 7.) enjoy working google wallet.
- Reboot
NOTE: Remeber to clear google wallet just in case.
ANOTHER NOTE: If your device is not on this list: https://github.com/Magisk-Modules-Repo/MagiskHidePropsConf/blob/master/common/prints.sh
then you'll have to manually obtain an old fingerprint for your device, its all on here how to do:
MagiskHidePropsConf/README.md at master · Magisk-Modules-Repo/MagiskHidePropsConf
This tool is now dead... Contribute to Magisk-Modules-Repo/MagiskHidePropsConf development by creating an account on GitHub.
github.com
Enjoy.
EDIT: Alternatively try this:
https://github.com/Displax/safetynet-fix/releases/
it wont work for all from what I know but it was successful for some.

I only had to update magisk then add Wallet to the deny list.... Haven't tested an actual payment yet, but it stopped complaining about root when I open it.
I probably already had some of those modules installed from before. Some of the names look familiar.
Tried it at McDonald's... Didn't work. I guess the app stops complaining after a few goes of starting it up... Need to check in the "contactless setup" part of the Wallet app to be sure. Has a warning there if your device is "unsafe".
I'll try the full list of steps above tonight and confirm tomorrow if I can pay with it.

ahhh, it was not only with me... going to install to see if it passes...

None of the above works. If you try to pay contactless it will fail. If you try to add card it will fail also. I think that the new google wallet can detect if bootloader is unlocked. I don't see any workaround on this.

covar said:
None of the above works. If you try to pay contactless it will fail. If you try to add card it will fail also. I think that the new google wallet can detect if bootloader is unlocked. I don't see any workaround on this.
Click to expand...
Click to collapse
Yeah I removed Magisk and I still failed. It seems bootloader related I think.

covar said:
None of the above works. If you try to pay contactless it will fail. If you try to add card it will fail also. I think that the new google wallet can detect if bootloader is unlocked. I don't see any workaround on this.
Click to expand...
Click to collapse
works fine for me, I added something you should try as well in case it didnt work for you.

Danishblunt said:
works fine for me, I added something you should try as well in case it didnt work for you.
Click to expand...
Click to collapse
Still nothing. Have you try to make payment????

covar said:
Still nothing. Have you try to make payment????
Click to expand...
Click to collapse
I made 4 payments after the fix, latest being 12 minutes prior to this reply. it works fine.
I suggest starting from my post 1point by point. If it still doesnt work then you may have an app that somehow triggers the root detection that I don't have on my phone.

You should probably mention that picking correct CTS fingerprint is crucial. Sometimes its one version down for your device, but other times you have to use entirely different (but probably related somehow?) device FP, either because prior version doesn't exist, or Google simply doesn't accept it. The Google Pay thread has a scattered reports of working combos somebody should probably make a nicer list of.

I think some steps are not necessary. Like hiding all Google apps and SQ Lite
Also, momo-hider is depreciated. Use shamiko.
Lastly, I just installed magisk hide props (and configured it) and now it works.

Thanks its work✓ !! Is it permanent? Or someday its gonna pop out because some updates?
Magisk user

Paulo_1307_ said:
I think some steps are not necessary. Like hiding all Google apps and SQ Lite
Also, momo-hider is depreciated. Use shamiko.
Lastly, I just installed magisk hide props (and configured it) and now it works.
Click to expand...
Click to collapse
You are correct. The only thing to do is to configure props. I personally change the fingerprint and now works fine.

Paulo_1307_ said:
I think some steps are not necessary. Like hiding all Google apps and SQ Lite
Also, momo-hider is depreciated. Use shamiko.
Lastly, I just installed magisk hide props (and configured it) and now it works.
Click to expand...
Click to collapse
You're right, just listed old modules i gathered over time just in case without testing if they are needed anymore. Tested if they were needed and indeed, they arent.
Hiding the google apps is a good idea regardless if its needed or not.
Fixed the original post to reflect the changes.

Danishblunt said:
Saw on reddit that some people have issues with google pay, since the new update added some new checks. So here is what you do:
- Update Magisk to 25.2, Update magisk app to 25.2 as well
- Rename Magisk app if you havent already
- [ OPTIONAL ] Add all google apps on deny list (good practice in case google wants to detect root throught their other apps)
- install these modules: https://github.com/Magisk-Modules-Repo/MagiskHidePropsConf and https://github.com/kdrag0n/safetynet-fix
- then:
step 1.) Download any terminal (I use termux)
step 2.) type SU
step 3.) type props
step 4.) edit device fingerprint
step 5.) follow the onscreen promt
step 6.) once successfully changed, reboot device
optional (i didnt have to but you can try) reset google play, play services and google wallet appdata.
step 7.) enjoy working google wallet.
- Reboot
NOTE: Remeber to clear google wallet just in case.
ANOTHER NOTE: If your device is not on this list: https://github.com/Magisk-Modules-Repo/MagiskHidePropsConf/blob/master/common/prints.sh
then you'll have to manually obtain an old fingerprint for your device, its all on here how to do:
MagiskHidePropsConf/README.md at master · Magisk-Modules-Repo/MagiskHidePropsConf
This tool is now dead... Contribute to Magisk-Modules-Repo/MagiskHidePropsConf development by creating an account on GitHub.
github.com
Enjoy.
Click to expand...
Click to collapse
hi may I ask what does step 5 mean? Thanks!

darkhunter9 said:
hi may I ask what does step 5 mean? Thanks!
Click to expand...
Click to collapse
baisically just means follow instructions on your screen.

Paulo_1307_ said:
I think some steps are not necessary. Like hiding all Google apps and SQ Lite
Also, momo-hider is depreciated. Use shamiko.
Lastly, I just installed magisk hide props (and configured it) and now it works.
Click to expand...
Click to collapse
Can confirm this works

I had both GPay and Wallet installed on my Pixel 5; yesterday I got the "security requirements" notification.
I've now removed both apps. When I tap on the GPay tile in Quick Settings, it says "Hold to reader", but when I tap Show All, it says "Not set up". I'll test it later today.
Does anyone know how to clear cache for embedded GPay?

V0latyle said:
I had both GPay and Wallet installed on my Pixel 5; yesterday I got the "security requirements" notification.
I've now removed both apps. When I tap on the GPay tile in Quick Settings, it says "Hold to reader", but when I tap Show All, it says "Not set up". I'll test it later today.
Does anyone know how to clear cache for embedded GPay?
Click to expand...
Click to collapse
It will show an error when you try to do a transaction if you havent done the above. Minr also showed that it was reafy but when trying to pay it would throw error.

Danishblunt said:
It will show an error when you try to do a transaction if you havent done the above. Minr also showed that it was reafy but when trying to pay it would throw error.
Click to expand...
Click to collapse
I just went to Dollar General and successfully used tap to pay. I do not have either of the discrete apps installed, just embedded GPay.

Danishblunt said:
Saw on reddit that some people have issues with google pay, since the new update added some new checks. So here is what you do:
- Update Magisk to 25.2, Update magisk app to 25.2 as well
- Rename Magisk app if you havent already
- [ OPTIONAL ] Add all google apps on deny list (good practice in case google wants to detect root throught their other apps)
- install these modules: https://github.com/Magisk-Modules-Repo/MagiskHidePropsConf and https://github.com/kdrag0n/safetynet-fix
- then:
step 1.) Download any terminal (I use termux)
step 2.) type SU
step 3.) type props
step 4.) edit device fingerprint
step 5.) follow the onscreen promt
step 6.) once successfully changed, reboot device
optional (i didnt have to but you can try) reset google play, play services and google wallet appdata.
step 7.) enjoy working google wallet.
- Reboot
NOTE: Remeber to clear google wallet just in case.
ANOTHER NOTE: If your device is not on this list: https://github.com/Magisk-Modules-Repo/MagiskHidePropsConf/blob/master/common/prints.sh
then you'll have to manually obtain an old fingerprint for your device, its all on here how to do:
MagiskHidePropsConf/README.md at master · Magisk-Modules-Repo/MagiskHidePropsConf
This tool is now dead... Contribute to Magisk-Modules-Repo/MagiskHidePropsConf development by creating an account on GitHub.
github.com
Enjoy.
Click to expand...
Click to collapse
Even tho Xiaomi Mi 11 Lite 5g (European version) is not on either list, I got Google Wallet to play nicely (ie work! ) using this guide. In effect the Xiaomi Mi 11 Lite Indonesia Xiaomi:M2101K9AG must have similar coding to Xiaomi M2102K9G. I am now on 13.0.6 SKIEUXM MIUI version. I was worried in the termux app re warnings about ensuring device fingerprint is compatible etc, but when I got the sae warning in adb shell command within minimal adb & fastboot command, I decided to see what happens and it all worked for me. Have carried 2 transactions within Google wallet over yesterday & today with complete success. My device was already certified within Play protect part of Google Play Store.
So I have rooted phone with Magisk 25.2 version, zygisk and deny list set up ; magisk hidden (Hide) then froze Magisk Hide within SD Maid so my fully rooted phone runs Ad Away, no ads & all my banking apps eg Santander & Halifax work fine, so root is hidden from them. Given up trying to get Chase banking app tho