Hi everyone!
It is very necessary to get root on Oukitel WP5 Pro!
All that has happened so far is to unlock the bootloader and install TWRP.
Current firmware - OUKITEL_WP5Pro_EEA_V03_20200723_20200723-1929
Can someone help with getting root?
Perhaps it will be possible to port andoid 9 from another device with a mt6762d processor and get root at 9 first, and then upgrade to android 10?
but one guy say:
"Android 10 apps or pretty much anything from prevents mounting system as R / W. Yes, even if you are rooted."
I don't know if there is still some way to get root, albeit with downgrade to android 9.
Hi @aviplokos84, I guess we're on the same boat. Did you install TWRP by Mehanik6? That's the only one I found but it's not working properly. When I start it after a clean factory reset, it works. But once I have installed my apps and such if I reboot into recovery it gets stuck at the TWRP logo. I repeated the process 3 times and I always ended up at the same point.
wallace108 said:
Hi @aviplokos84, I guess we're on the same boat. Did you install TWRP by Mehanik6? That's the only one I found but it's not working properly. When I start it after a clean factory reset, it works. But once I have installed my apps and such if I reboot into recovery it gets stuck at the TWRP logo. I repeated the process 3 times and I always ended up at the same point.
Click to expand...
Click to collapse
Yes, I was able to install recovery by Mehanik6.
it did not immediately turn out exactly as in his instruction, not immediately possible to unlock the bootloader.
Each time I enter the recovery, its read-only access, changes are not saved. This stupid section Super!
Maybe you should double-check everything.
Or try to boot into the recovery from the bootloader?
I will look into it. Because I don't understand why I can get access to the recovery only the first time. However on that occasion I managed to successfully install the patch to remove the orange state warning.
This is a very strange phone. I can't figure out how to change all the pictures on the lock screen... Is the Oukitel launcher any good? A lot of sources say the phone has NFC but mine doesn't seem to. (also heard the extra cameras' are fake?)
Edit: I love the phone though, I find most phones too thin lol.
We have ROOT!
Please update your Magisk Manager to the latest canary build and patch the boot.img.
wallace108 said:
We have ROOT!
Please update your Magisk Manager to the latest canary build and patch the boot.img.
Click to expand...
Click to collapse
hello, is it possible to have some instructions on the procedure or at least point me in the direction where i might find them.
thanks in advance
h2ikm8 said:
hello, is it possible to have some instructions on the procedure or at least point me in the direction where i might find them.
thanks in advance
Click to expand...
Click to collapse
I suggest you should google Magisk Manager and learn how it works.
wallace108 said:
I suggest you should google Magisk Manager and learn how it works.
Click to expand...
Click to collapse
i know how magisk works (sort of), i have rooted my previous phone a redmi note 4, this one on the other hand is my new phone and the patch part i don't quite understand the procedure, and since it's my working phone i just wanted to avoid bricking the damn thing.
i'm finding a lot of conflicting posts, i just need those pointers on how it's done, and was wandering if there are any custom roms for it at all.
thanks for the fast reply anyway
h2ikm8
This procedure is delicate and you take FULL responsability for what you do. Be aware of that.
1.You want to download the firmware from Oukitel site and familiarize with flashtools (which is the tool to upload the firmware).
2. Then you must unlock the bootloader (you do that with adb tools using the fastboot command).
3. Copy boot.img to the root of your phone (the file is whitin the firmware).
4. With magisk you want to patch the above mentioned boot.img. Magisk will produce a patched image.
5. copy such image on your computer and upload it with flashtools to replace the original boot.img
6. At the same time you must overwrite the file vbmeta.img with an empty one (search online for this).
Done.
Ok, will try with full knowledge that if i break it...i allready bought it
wallace108 said:
h2ikm8
This procedure is delicate and you take FULL responsability for what you do. Be aware of that.
1.You want to download the firmware from Oukitel site and familiarize with flashtools (which is the tool to upload the firmware).
2. Then you must unlock the bootloader (you do that with adb tools using the fastboot command).
3. Copy boot.img to the root of your phone (the file is whitin the firmware).
4. With magisk you want to patch the above mentioned boot.img. Magisk will produce a patched image.
5. copy such image on your computer and upload it with flashtools to replace the original boot.img
6. At the same time you must overwrite the file vbmeta.img with an empty one (search online for this).
Done.
Click to expand...
Click to collapse
so i managed to follow your procedure, and got magisk working but i'm stuck at the logo in Mehanik6' s twrp.
any advice? thanks
@h2ikm8 I'm sorry but we're in the same boat (I got the same error). At the moment I'm waiting for a working TWRP custom recovery. I suggest you should check the twrp site for updates.
Hi.
wallace108 said:
This procedure is delicate and you take FULL responsability for what you do. Be aware of that.
1.You want to download the firmware from Oukitel site and familiarize with flashtools (which is the tool to upload the firmware).
2. Then you must unlock the bootloader (you do that with adb tools using the fastboot command).
3. Copy boot.img to the root of your phone (the file is whitin the firmware).
4. With magisk you want to patch the above mentioned boot.img. Magisk will produce a patched image.
5. copy such image on your computer and upload it with flashtools to replace the original boot.img
6. At the same time you must overwrite the file vbmeta.img with an empty one (search online for this).
Done.
Click to expand...
Click to collapse
wallace108 said:
@h2ikm8 I'm sorry but we're in the same boat (I got the same error). At the moment I'm waiting for a working TWRP custom recovery. I suggest you should check the twrp site for updates.
Click to expand...
Click to collapse
Please clarify, does the way described above works to rooting device without using TWRP ?
@df_ni The answer is yes. In fact at the moment there is no TWRP recovery actually working for this device.
But since getting root is done by Magisk, a custom recovery is unnecessary.
Thanks!
Hi,
So, is there a protocol do finally root that device ? I tried several guides, but at best my phone is now in "orange state" (it was it "red state" at some point !).
I guess that it's important to root it, only by the fact that most launchers don't even allow to add widgets !
Hi all... Until we get ROOT to this phone.
I have been using WP5 Pro as my daily driver for 9 months now, and am super happy with it.
However... After 3 months, the large 8000Ah battery didn't last as long as it should.
So I opened it up in ADB :
adb shell 'pm list packages -f' | sed -e 's/.*=//' | sort
ore
adb shell pm list packages
and took a closer look at the pre installed crap on the phone. And I was shocked by all the unnecessary s*it i found. com.mediatek.atmwifimeta : Why is all my Wifi traffic logged and sent to a remote server !!!.
To you who are interested in removing bloatware on your phone.
I put together a list of crap you can delete without affecting your daily use of the phone.
Just Copy & Paste in terminal and restart the phone.
adb shell pm uninstall -k --user 0 com.ssui.chdmodel
adb shell pm uninstall -k --user 0 com.android.companiondevicemanager
adb shell pm uninstall -k --user 0 com.android.dynsystem
adb shell pm uninstall -k --user 0 com.android.wallpaper.livepicker
adb shell pm uninstall -k --user 0 com.google.android.apps.tachyon
adb shell pm uninstall -k --user 0 com.google.android.apps.docs
adb shell pm uninstall -k --user 0 com.google.android.apps.googleassistant
adb shell pm uninstall -k --user 0 com.google.android.apps.wellbeing
adb shell pm uninstall -k --user 0 com.google.android.apps.youtube.music
adb shell pm uninstall -k --user 0 com.elephanttek.faceunlock
adb shell pm uninstall -k --user 0 com.android.emergency
adb shell pm uninstall -k --user 0 com.android.nfc
adb shell pm uninstall -k --user 0 com.elephanttek.faceunlock
adb shell pm uninstall -k --user 0 com.adups.privacypolicy
adb shell pm uninstall -k --user 0 com.android.backupconfirm
adb shell pm uninstall -k --user 0 com.adups.fota
adb shell pm uninstall -k --user 0 com.android.bips
adb shell pm uninstall -k --user 0 com.android.cts.ctsshim
adb shell pm uninstall -k --user 0 com.android.cts.priv.ctsshim
adb shell pm uninstall -k --user 0 com.android.localtransport
adb shell pm uninstall -k --user 0 com.android.partnerbrowsercustomizations.example
adb shell pm uninstall -k --user 0 com.android.printspooler
adb shell pm uninstall -k --user 0 com.android.sharedstoragebackup
adb shell pm uninstall -k --user 0 com.android.wallpaperbackup
adb shell pm uninstall -k --user 0 com.debug.loggerui
adb shell pm uninstall -k --user 0 com.android.traceur
adb shell pm uninstall -k --user 0 com.android.htmlviewer
adb shell pm uninstall -k --user 0 com.google.android.apps.restore
adb shell pm uninstall -k --user 0 com.google.android.apps.restore
adb shell pm uninstall -k --user 0 com.google.android.feedback
adb shell pm uninstall -k --user 0 com.google.android.onetimeinitializer
adb shell pm uninstall -k --user 0 com.google.android.gms.location.history
adb shell pm uninstall -k --user 0 com.google.android.videos
adb shell pm uninstall -k --user 0 com.mediatek.atmwifimeta
adb shell pm uninstall -k --user 0 com.android.calllogbackup
adb shell pm uninstall -k --user 0 com.ssui.setupwizard
adb shell pm uninstall -k --user 0 com.ssui.sos
You can Reinstall one or all apps again by putting:
adb shell cmd package install-existing com.app name
With USB Debugging enabled on your phone.....
There is a lot to copy and paste, so I created a script that cleans your phone in 10 seconds from all this bloatware. Download it at the bottom of this post to your desktop, unzip it to your desktop, connect phone and double-click the Claning file.
The default launcher on this phone is terrible. Here is a good alternative...
Using Mod SMART LAUNCHER 5 PRO
You can download it here: here.... here.... ore here..... just incase here too......
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hello Oukitel WP5 pro users.
I'm facing issues that phone kills my sports tracking apps after lock let say after 30mins -+. I tried lot of fix: allow apps in DuraSpeed, disable duraspeed, don't optimize apps in battery option. Lot of stuff. Do you have any clue, where can be located some magick settings to denied phone killing apps. Maybe I set some hidden feature do to that, because issue does not exist few weeks ago. All reply are welcome.
nomexcze said:
Hello Oukitel WP5 pro users.
I'm facing issues that phone kills my sports tracking apps after lock let say after 30mins -+. I tried lot of fix: allow apps in DuraSpeed, disable duraspeed, don't optimize apps in battery option. Lot of stuff. Do you have any clue, where can be located some magick settings to denied phone killing apps. Maybe I set some hidden feature do to that, because issue does not exist few weeks ago. All reply are welcome.
Click to expand...
Click to collapse
Hi.
The problem lies in how Oukitel has set app permission. Only system apps have permission to run constantly in the background. Have a oukitel C16 pro and the same problem there. To get around that problem on that phone, I rooted the phone with Magisk, and put the app's in to the system folder and let the phone boot up with the apps I needed as system app, and problem was solved.
So I guess when ROOT comes to this phone, we can solve your problem
Related
This is just another debloating how-to and I'm just starting out with the POCO F1. As of now, I'm trying to uninstall individual packages to see which are safe to remove and which aren't. Before we get to that, let's go through the steps one by one. The guide is similar to the one posted here.
How to debloat the Xiaomi POCO F1
1. First download the ADB tools from
hxxps://dl.google.com/android/repository/platform-tools-latest-windows.zip
This is the official source, right from Google.
2. Extract the contents of the zip file to a folder.
3. Open a command prompt in the folder by right-clicking while holding down the 'Shift' key.
4. Connect your device to your computer.
5. Ensure USB debugging is enabled for your phone. For this you will have to:
Open Settings>About Phone>Tap 5 times on 'MIUI Version (For POCO)>Go back to settings>Additional Settings under System & Device>Developer options>Enable USB Debugging.
6. In the command prompt type the following to see if the device is connected and accessible.
Code:
adb devices
7. You'll see something like
List of devices attached
@#$SDFD5 Device
8. Then enter the shell by typing
Code:
adb shell
9. Identify all the packages with the word Xiaomi in it by typing this:
Code:
pm list packages | grep xiaomi
10. These are the packages I found on my phone.
Code:
package:com.xiaomi.powerchecker
package:com.xiaomi.account
package:com.xiaomi.micloud.sdk
package:com.xiaomi.payment
package:com.xiaomi.oversea.ecom
package:com.xiaomi.midrop.overlay
package:com.xiaomi.mirecycle
package:com.xiaomi.simactivate.service
package:com.xiaomi.bttester
package:com.fido.xiaomi.uafclient
package:com.xiaomi.glgm
package:com.xiaomi.upnp
package:com.xiaomi.xmsf
package:com.xiaomi.mipicks
package:com.xiaomi.finddevice
package:com.xiaomi.joyose
package:com.xiaomi.midrop
package:com.xiaomi.mbnloader
package:com.xiaomi.providers.appindex
package:com.xiaomi.bluetooth
package:com.xiaomi.camera.parallelservice
package:com.xiaomi.scanner
package:com.xiaomi.discover
11. Then repeat the same command but this time search for miui instead of Xiaomi.
Code:
pm list packages | grep miui
12. These are the list of packages that I found on the POCO F1.
Code:
package:com.miui.screenrecorder
package:com.miui.powerkeeper
package:com.miui.fm
package:com.miui.qr
package:com.miui.securityadd
package:com.miui.gallery
package:com.miui.msa.global
package:com.miui.securitycenter
package:com.miui.videoplayer
package:com.miui.guardprovider
package:com.miui.backup
package:com.miui.micloudsync
package:com.miui.daemon
package:com.miui.hybrid
package:com.miui.vsimcore
package:com.miui.securitycore
package:com.miui.player
package:com.miui.sysopt
package:com.miui.system
package:com.miui.global.packageinstaller
package:com.miui.translation.kingsoft
package:com.miui.virtualsim
package:com.miui.compass
package:com.miui.cit
package:com.miui.rom
package:com.miui.android.fashiongallery
package:com.miui.videoplayer.overlay
package:com.miui.bugreport
package:com.miui.translation.youdao
package:com.miui.cloudbackup
package:com.miui.klo.bugreport
package:com.miui.notes
package:com.miui.wmsvc
package:com.miui.translationservice
package:com.miui.cloudservice
package:com.miui.hybrid.accessory
package:com.miui.touchassistant
package:com.miui.calculator
package:com.miui.cloudservice.sysbase
package:com.miui.miwallpaper
package:com.miui.cleanmaster
package:com.miui.analytics
package:com.miui.weather2
package:com.miui.yellowpage
package:com.miui.antispam
package:com.miui.providers.weather
package:com.miui.smsextra
package:com.lbe.security.miui
package:com.miui.whetstone
package:com.miui.core
package:com.miui.audioeffect
13. To remove a package simply type the command below and replace 'com.miui.analytics' with the name of the package without the quotes.
Code:
pm uninstall -k --user 0 "name of package”
14. The apps listed below are safe to remove.
Code:
com.miui.screenrecorder
com.miui.fm
com.mi.liveassistant
com.milink.service
com.qiyi.video
com.xiaomi.gamecenter.sdk.service
com.xiaomi.payment
com.android.browser
com.miui.systemAdSolution
com.baidu.input_mi
com.xiaomi.ab
com.xiaomi.jr
com.baidu.duersdk.opensdk
com.miui.hybrid
com.baidu.searchbox
com.mfashiongallery.emag
com.miui.player
com.miui.translation.kingsoft
com.miui.virtualsim
com.miui.compass
com.miui.personalassistant
com.duokan.phone.remotecontroller
com.miui.bugreport
com.miui.translation.youdao
com.xiaomi.channel
com.mipay.wallet
com.xiaomi.lens
com.xiaomi.pass
com.xiaomi.shop
com.miui.klo.bugreport
com.xiaomi.joyose
com.miui.notes
com.miui.video
com.xiaomi.midrop
com.miui.hybrid.accessory
com.sohu.inputmethod.sogou.xiaomi
com.xiaomi.o2o
com.autonavi.minimap
com.miui.daemon
com.miui.contentcatcher
com.miui.analytics
com.xiaomi.vipaccount
com.caf.fmradio
com.miui.cloudservice
com.miui.cloudservice.sysbase
com.miui.cloudbackup
com.miui.gallery
com.miui.vsimcore
Good.. It is full of bloatwares..
You have and automatic tool to doing this.
here is the link
http://en.miui.com/thread-3620390-1-1.html
If you remove finddevice, and if you try reboot the device, the device will not be able to boot. You will then be directed to custom recovery and will have to reflash the device.
If any one knew the purpose of these apps/packages, please list so that anyone new to this can confidently remove those apps.
Doesn't these apps get reinstalled with the update?
mrcoder007 said:
If any one knew the purpose of these apps/packages, please list so that anyone new to this can confidently remove those apps.
Click to expand...
Click to collapse
I'm trying to compile a list of packages and what they do. The information is all scattered right now.
Ruvy said:
Doesn't these apps get reinstalled with the update?
Click to expand...
Click to collapse
I honestly don't know man, this would be the first time I'm trying out MIUI. I had the Mi A1 before this, the Stock Android on that was the most appealing part. MIUI is so frustrating to operate.
mohan_168 said:
If you remove finddevice, and if you try reboot the device, the device will not be able to boot. You will then be directed to custom recovery and will have to reflash the device.
Click to expand...
Click to collapse
Interesting, I have had issues after I removed certain packages. There was this pop-up notification for com.whetstone which was constantly pissing me off. But I've tried removing finddevice and my POCO rebooted just fine.
detritu5 said:
You have and automatic tool to doing this.
here is the link
http://en.miui.com/thread-3620390-1-1.html
Click to expand...
Click to collapse
Thanks for this man. I'll check this out. The above method does not require you to unlock the bootloader or root so it's less intrusive.
didgerid00 said:
I'm trying to compile a list of packages and what they do. The information is all scattered right now.
I honestly don't know man, this would be the first time I'm trying out MIUI. I had the Mi A1 before this, the Stock Android on that was the most appealing part. MIUI is so frustrating to operate.
Interesting, I have had issues after I removed certain packages. There was this pop-up notification for com.whetstone which was constantly pissing me off. But I've tried removing finddevice and my POCO rebooted just fine.
Thanks for this man. I'll check this out. The above method does not require you to unlock the bootloader or root so it's less intrusive.
Click to expand...
Click to collapse
This app neither
Enviado desde mi POCOPHONE F1 mediante Tapatalk
Pocophone F1 support Project treble?
Hello does Pocophone F1 support Project treble?
didgerid00 said:
This is just another debloating how-to and I'm just starting out with the POCO F1. As of now, I'm trying to uninstall individual packages to see which are safe to remove and which aren't. Before we get to that, let's go through the steps one by one. The guide is similar to the one posted here.
How to debloat the Xiaomi POCO F1
1. First download the ADB tools from
hxxps://dl.google.com/android/repository/platform-tools-latest-windows.zip
This is the official source, right from Google.
2. Extract the contents of the zip file to a folder.
3. Open a command prompt in the folder by right-clicking while holding down the 'Shift' key.
4. Connect your device to your computer.
5. Ensure USB debugging is enabled for your phone. For this you will have to:
Open Settings>About Phone>Tap 5 times on 'MIUI Version (For POCO)>Go back to settings>Additional Settings under System & Device>Developer options>Enable USB Debugging.
6. In the command prompt type the following to see if the device is connected and accessible.
Code:
adb devices
7. You'll see something like
List of devices attached
@#$SDFD5 Device
8. Then enter the shell by typing
Code:
adb shell
9. Identify all the packages with the word Xiaomi in it by typing this:
Code:
pm list packages | grep xiaomi
10. These are the packages I found on my phone.
Code:
package:com.xiaomi.powerchecker
package:com.xiaomi.account
package:com.xiaomi.micloud.sdk
package:com.xiaomi.payment
package:com.xiaomi.oversea.ecom
package:com.xiaomi.midrop.overlay
package:com.xiaomi.mirecycle
package:com.xiaomi.simactivate.service
package:com.xiaomi.bttester
package:com.fido.xiaomi.uafclient
package:com.xiaomi.glgm
package:com.xiaomi.upnp
package:com.xiaomi.xmsf
package:com.xiaomi.mipicks
package:com.xiaomi.finddevice
package:com.xiaomi.joyose
package:com.xiaomi.midrop
package:com.xiaomi.mbnloader
package:com.xiaomi.providers.appindex
package:com.xiaomi.bluetooth
package:com.xiaomi.camera.parallelservice
package:com.xiaomi.scanner
package:com.xiaomi.discover
11. Then repeat the same command but this time search for miui instead of Xiaomi.
Code:
pm list packages | grep miui
12. These are the list of packages that I found on the POCO F1.
Code:
package:com.miui.screenrecorder
package:com.miui.powerkeeper
package:com.miui.fm
package:com.miui.qr
package:com.miui.securityadd
package:com.miui.gallery
package:com.miui.msa.global
package:com.miui.securitycenter
package:com.miui.videoplayer
package:com.miui.guardprovider
package:com.miui.backup
package:com.miui.micloudsync
package:com.miui.daemon
package:com.miui.hybrid
package:com.miui.vsimcore
package:com.miui.securitycore
package:com.miui.player
package:com.miui.sysopt
package:com.miui.system
package:com.miui.global.packageinstaller
package:com.miui.translation.kingsoft
package:com.miui.virtualsim
package:com.miui.compass
package:com.miui.cit
package:com.miui.rom
package:com.miui.android.fashiongallery
package:com.miui.videoplayer.overlay
package:com.miui.bugreport
package:com.miui.translation.youdao
package:com.miui.cloudbackup
package:com.miui.klo.bugreport
package:com.miui.notes
package:com.miui.wmsvc
package:com.miui.translationservice
package:com.miui.cloudservice
package:com.miui.hybrid.accessory
package:com.miui.touchassistant
package:com.miui.calculator
package:com.miui.cloudservice.sysbase
package:com.miui.miwallpaper
package:com.miui.cleanmaster
package:com.miui.analytics
package:com.miui.weather2
package:com.miui.yellowpage
package:com.miui.antispam
package:com.miui.providers.weather
package:com.miui.smsextra
package:com.lbe.security.miui
package:com.miui.whetstone
package:com.miui.core
package:com.miui.audioeffect
13. To remove a package simply type the command below and replace 'com.miui.analytics' with the name of the package without the quotes.
Code:
pm uninstall -k --user 0 "name of package”
14. The apps listed below are safe to remove.
Code:
com.miui.screenrecorder
com.miui.fm
com.mi.liveassistant
com.milink.service
com.qiyi.video
com.xiaomi.gamecenter.sdk.service
com.xiaomi.payment
com.android.browser
com.miui.systemAdSolution
com.baidu.input_mi
com.xiaomi.ab
com.xiaomi.jr
com.baidu.duersdk.opensdk
com.miui.hybrid
com.baidu.searchbox
com.mfashiongallery.emag
com.miui.player
com.miui.translation.kingsoft
com.miui.virtualsim
com.miui.compass
com.miui.personalassistant
com.duokan.phone.remotecontroller
com.miui.bugreport
com.miui.translation.youdao
com.xiaomi.channel
com.mipay.wallet
com.xiaomi.lens
com.xiaomi.pass
com.xiaomi.shop
com.miui.klo.bugreport
com.xiaomi.joyose
com.miui.notes
com.miui.video
com.xiaomi.midrop
com.miui.hybrid.accessory
com.sohu.inputmethod.sogou.xiaomi
com.xiaomi.o2o
com.autonavi.minimap
com.miui.daemon
com.miui.contentcatcher
com.miui.analytics
com.xiaomi.vipaccount
com.caf.fmradio
com.miui.cloudservice
com.miui.cloudservice.sysbase
com.miui.cloudbackup
com.miui.gallery
com.miui.vsimcore
Click to expand...
Click to collapse
Samy_Mann said:
Hello does Pocophone F1 support Project treble?
Click to expand...
Click to collapse
Well, all phones shipping with Android Oreo and upwards support Project Treble. So yes, the Poco F1 does support Treble.
Also, at the 59m18s mark on their livestream the guy does mention that it officially supports Project Treble. hxxps://youtu.be/-cLg4xki_2U?t=3558
Install GSI
Thx for the fast response. So Ist can install a GSI for Pixel experience?
didgerid00 said:
Well, all phones shipping with Android Oreo and upwards support Project Treble. So yes, the Poco F1 does support Treble.
Click to expand...
Click to collapse
Samy_Mann said:
Thx for the fast response. So Ist can install a GSI for Pixel experience?
Click to expand...
Click to collapse
Technically, yes. Though I would wait till someone tries it first.
The POCO F1 is currently my daily driver, so after debloating it, I installed Rootless Pixel Launcher and the Bridge to enable news feeds. The experience is near Pixel like. I'm hating the Xiaomi dialer though, will experiment with GSI once I have another phone as a backup.
didgerid00 said:
Technically, yes. Though I would wait till someone tries it first.
The POCO F1 is currently my daily driver, so after debloating it, I installed Rootless Pixel Launcher and the Bridge to enable news feeds. The experience is near Pixel like. I'm hating the Xiaomi dialer though, will experiment with GSI once I have another phone as a backup.
Click to expand...
Click to collapse
Try installing this: https://forum.xda-developers.com/android/apps-games/app-google-phone-v14-0-175904292-bubble-t3708218
Same here. But the Pixel launcher only changed the App drawer and the start screen. I think the GSI will give a much better experience. I had the Note 8 before and the different UI is really annoying but the Pixel experience would be a middle ground for me I guess. Ich found this link to flash the GSI:
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
didgerid00 said:
Technically, yes. Though I would wait till someone tries it first.
The POCO F1 is currently my daily driver, so after debloating it, I installed Rootless Pixel Launcher and the Bridge to enable news feeds. The experience is near Pixel like. I'm hating the Xiaomi dialer though, will experiment with GSI once I have another phone as a backup.
Click to expand...
Click to collapse
mohan_168 said:
If you remove finddevice, and if you try reboot the device, the device will not be able to boot. You will then be directed to custom recovery and will have to reflash the device.
Click to expand...
Click to collapse
Can confirm. Find device causes bootloop.
sreekantt said:
Can confirm. Find device causes bootloop.
Click to expand...
Click to collapse
Thanks for confirming. Removing it from list.
Chris_Techy said:
Try installing this: https://forum.xda-developers.com/android/apps-games/app-google-phone-v14-0-175904292-bubble-t3708218
Click to expand...
Click to collapse
Were you able to get the Google dialer show call logs? I tried everything but failed.
Sunny2ask said:
Were you able to get the Google dialer show call logs? I tried everything but failed.
Click to expand...
Click to collapse
Does not work on MIUI 9. Once MIUI 10 hits, you will be able to see call logs.
Thanks Man. Its works wonders
Just debloated my poco f1 as follows (copy paste friendly )
Code:
# browser
pm uninstall -k --user 0 com.android.browser
# sound recorder
pm uninstall -k --user 0 com.android.soundrecorder
# google duo
pm uninstall -k --user 0 com.google.android.apps.tachyon
# google play music
pm uninstall -k --user 0 com.google.android.music
# google play videos
pm uninstall -k --user 0 com.google.android.videos
# file explorer
pm uninstall -k --user 0 com.mi.android.globalFileexplorer
# feedback
pm uninstall -k --user 0 com.miui.bugreport
# compass
pm uninstall -k --user 0 com.miui.compass
# gallery
pm uninstall -k --user 0 com.miui.gallery
# notes
pm uninstall -k --user 0 com.miui.notes
# music
pm uninstall -k --user 0 com.miui.player
# screen recorder
pm uninstall -k --user 0 com.miui.screenrecorder
# video
pm uninstall -k --user 0 com.miui.videoplayer
# weather
pm uninstall -k --user 0 com.miui.weather2
# drop
pm uninstall -k --user 0 com.xiaomi.midrop
# apps
pm uninstall -k --user 0 com.xiaomi.mipicks
# scanner
pm uninstall -k --user 0 com.xiaomi.scanner
---------- Post added 8th September 2018 at 12:43 AM ---------- Previous post was 7th September 2018 at 11:59 PM ----------
Found the Systep app remover very useful to determine which apps are safe to delete and which are key or should be kept. More about it @ https://www.theandroidsoul.com/android-system-apps-safe-to-uninstall/
Although the app needs root to uninstall system apps, if you are not having root you can still install it and let it inpsect your apps and then use adb to uninstall bloat as per its recommendations and your taste.
Is there any tips to remove google phone app without root or change rom ??
You can just disable using adb commands: adb shell pm uninstall --user 0 com.google.android.dialer
But you need to install another Dialer and the one from MIUI can't be installed without root the device
bartito said:
You can just disable using adb commands: adb shell pm uninstall --user 0 com.google.android.dialer
But you need to install another Dialer and the one from MIUI can't be installed without root the device
Click to expand...
Click to collapse
Thx bro
1. Sideloaded an app using LineageOS 17.1 recovery via "Apply update" > "Apply from ADB" > then "adb sideload" command on my PC.
2. Uninstalled the app using "adb shell pm uninstall -k --user 0 <package.name>". Also uninstalled from my work profile using the same command.
3. Now when I try to sideload the same app using the same process, it says success, however the app isn't on my phone.
Any help? Thanks.
Code:
adb shell pm uninstall -k -user 0 <package.name>
doesn't uninstall an app, it simply hides the app from Android's default user ( read: user 0 ).
To really uninstall an app you'ld have to run
Code:
adb uninstall <package.name>
jwoegerbauer said:
Code:
adb shell pm uninstall -k -user 0 <package.name>
doesn't uninstall an app, it simply hides the app from Android's default user ( read: user 0 ).
To really uninstall an app you'ld have to run
Code:
adb uninstall <package.name>
Click to expand...
Click to collapse
I tried that but I just got the error message "[DELETE FAILED_INTERNAL_ERROR]". Any idea on how to fix this mess?
Can anyone please help me with this? I need to properly uninstall the app and reinstall it.
google is your friend
How to install / get back uninstalled Apps (APKs) with ADB.
A lot of people searched for a way to uninstall bloat or APKs using ADB because a lot of OEMs don't allow uninstalling many of preinstalled apps. Tested on Pie and Oreo. BUT most of the articles if not all of them ( couldn't find any article...
forum.xda-developers.com
Hello Everyone,
I hope you all are good,
So I see some on you wondering about how to uninstall, reinstall, install, pull, enable and disable apps for the watch, so I decided to make this thread to address these different scenarios, this is based on test of users, if there is any incorrect command, let me know and I will update the thread...
Requirements: ADB (to execute adb commands)...
~~~ Enabling Watch4 ADB ~~~
The first thing you need to do is enable the watch developer mode by going into watch settings then about and tap the version many times till it says switched on, inside developer mode enable ADB, it will enable ADB Wi-Fi, if it doesn't, enable then go to Wi-Fi and make sure that Wi-Fi is connected to the same network of the PC, head back to developer mode and you will see under ADB Wi-Fi IP address...
~~~ Running ADB & Connecting to the Watch4 ~~~
Watch is ready for some ADB action and adventure lol, on pc start PowerShell or CMD inside ADB folder by holding down SHIFT and right clicking on empty area:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
or if you have cmd-here.exe, run it...
type the following:
adb connect <IP>
(if it's your first time, check your watch for RSA authentication and allow the PC to connect)
Now here is the list of scenarios...
~~~ Scenario 1: Installing Apps ~~~Place the apk in adb folder then type:
adb -s <IP> install --user 0 <apk-name>.apk
once you are done disconnect:
adb disconnect
~~~ Scenario 2: Uninstalling System Apps ~~~Be very careful, don't uninstall vital system apps, uninstall apps that you see on the watch home screen drawer or watch widgets...
Enter Shell mode typing:
adb shell
then type:
pm list packages
Find the packages you want to remove then type for each package
pm uninstall -k --user 0 <package-name-to-uninstall>
once you are done exit and disconnect:
exit
adb disconnect
~~~ Scenario 3: Disabling/Enabling System Apps ~~~Enter Shell mode typing:
adb shell
then type:
pm list packages
Find the packages you want to:
Disable then type for each package
pm disable-user --user 0 <package-name-to-disable>
Enable then type for each package
pm enable --user 0 <package-name-to-enable>
once you are done exit and disconnect:
exit
adb disconnect
~~~ Scenario 4: Reinstalling/Restoring System Apps ~~~Enter Shell mode typing:
adb shell
Find the package you want to restore (thanks to @adfree)
com.android.cts.priv.ctsshim
com.google.android.ext.services
com.samsung.android.knox.wkes
com.sec.location.nfwlocationprivacy
com.android.providers.telephony
com.sec.android.app.parser
com.android.dynsystem
com.samsung.android.networkstack
com.samsung.android.calendar
com.samsung.android.watch.cameracontroller
com.android.providers.calendar
com.sec.automation
com.android.providers.media
com.google.android.ext.shared
com.samsung.android.watch.watchface.analoguefont
com.samsung.android.watch.watchface.simplecomplication
com.skms.android.agent
com.samsung.android.wear.shealth
com.samsung.android.incallui
com.sec.usbsettings
com.samsung.android.watch.watchface.premiumanalog
com.sec.factory
com.android.companiondevicemanager
com.android.mms.service
com.samsung.android.watch.watchface.myphoto
com.samsung.android.watch.watchface.mystyle
com.android.providers.downloads
com.samsung.android.video.wearable
com.google.android.networkstack.tethering.overlay
com.samsung.android.storage.watchstoragemanager
com.monotype.android.font.foundation
com.samsung.android.gallery.watch
com.samsung.android.watch.compass
com.sk.vas.tshare
com.sec.android.app.factorykeystring
com.samsung.android.watch.runestone.app
com.sec.android.app.samsungapps
com.samsung.android.sdk.handwriting.watch
com.samsung.android.watch.findmyphone
com.samsung.android.watch.findmywatch
com.sec.android.app.wlantest
com.google.android.overlay.modules.permissioncontroller
com.android.vending
com.android.networkstack
com.samsung.android.watch.weather
com.google.android.wearable.batteryservices
com.android.modulemetadata
com.android.certinstaller
com.android.carrierconfig
com.google.android.marvin.talkback
com.samsung.android.app.esimkeystring
com.samsung.SMT
com.samsung.rtl
android
com.samsung.rtlassistant
com.google.android.overlay.modules.cellbroadcastreceiver
com.samsung.android.aircommandmanager
com.google.android.apps.wearable.settings
com.android.mtp
com.android.nfc
com.samsung.android.messaging
com.android.backupconfirm
com.samsung.android.stextclassifier
com.samsung.android.app.telephonyui
com.android.statementservice
com.samsung.android.wear.musictransfer
com.samsung.android.watch.watchface.basicclock
com.samsung.android.bixby.agent
com.sec.android.app.hwmoduletest
com.sec.bcservice
com.sec.modem.settings
com.samsung.hidden.SKT
com.monotype.android.font.samsungone
com.google.android.permissioncontroller
com.android.wearable.resources
com.sec.android.app.servicemodeapp
com.samsung.android.watch.watchface.simpleclassic
com.android.providers.settings
com.samsung.accessibility
com.sec.imsservice
com.samsung.android.service.health
com.google.android.apps.wearable.systemui
com.android.webview
com.samsung.android.watch.watchface.dualwatch
com.android.se
com.android.inputdevices
com.samsung.advancedcallservice
com.samsung.android.app.contacts
com.samsung.android.app.reminder
com.samsung.android.watch.watchface.together
com.samsung.android.watch.flashlight
com.samsung.android.watch.watchface.typography
com.samsung.android.watch.watchface.large
com.samsung.android.watch.watchface.animal
com.google.android.apps.maps
com.samsung.android.qrreader.watch
com.samsung.advp.imssettings
com.samsung.android.watch.alarm
com.android.cellbroadcastreceiver
com.sec.android.RilServiceModeApp
com.samsung.android.mdecservice
com.samsung.android.watch.timer
android.ext.shared
com.samsung.android.smartgesture
com.samsung.android.wear.blockednumber
com.android.server.telecom
com.samsung.euicc
com.android.keychain
com.google.android.packageinstaller
com.google.android.gms
com.google.android.gsf
com.google.android.tts
android.ext.services
com.android.wifi.resources
com.google.android.partnersetup
com.sec.android.diagmonagent
com.android.localtransport
com.samsung.android.batterysavingsettings
com.samsung.android.wearable.knox.attestation
com.samsung.android.watch.stf
com.google.android.wearable.ambient
com.samsung.packageinstalleroverlay
com.samsung.android.shealthmonitor
com.samsung.android.watch.watchface.aremoji
com.android.managedprovisioning
com.samsung.android.watch.watchface.analogmodular
com.android.networkstack.tethering
com.android.soundpicker
com.samsung.android.watch.watchface.emergency
com.samsung.android.watch.watchface.simpleanalogue
com.samsung.android.dialer
com.samsung.android.watch.safety_assistance
com.samsung.android.dqagent
com.google.android.clockworkicons
com.google.android.wearable.overlay.home.merlot
com.samsung.android.wearable.setupwizard
com.sem.factoryapp
com.samsung.android.watch.stopwatch
com.google.android.wearable.healthservices
com.samsung.wear.contacts.sync
com.ims.dm
com.google.android.apps.wearable.retailattractloop
com.sec.android.soagent
com.samsung.android.wearable.sysui
com.sec.phone
com.samsung.android.bixby.wakeup
com.samsung.android.honeyboard
com.samsung.android.scloud
com.samsung.android.location.locproxy
com.sec.app.RilErrorNotifier
com.samsung.euicc.wmservice
com.samsung.android.watch.watchface.bitmoji
com.sec.android.app.bluetoothtest
com.sec.android.sdhms
com.android.networkstack.permissionconfig
com.samsung.android.mediacontroller
com.google.android.wearable.app
com.android.cts.ctsshim
com.samsung.android.watch.screencapture
com.samsung.android.wear.samsungvoiceinput
com.samsung.android.watch.watchface.digitalmodular
com.samsung.android.wcs.extension
com.samsung.android.wearable.samsungaccount
com.samsung.android.providers.contacts
com.android.phone
com.android.shell
com.android.wallpaperbackup
com.android.providers.blockednumber
com.android.providers.userdictionary
com.android.providers.media.module
com.samsung.android.watch.watchface.superfiction
com.google.android.clockwork.oemsetup
com.wssyncmldm
com.samsung.android.watch.worldclock
com.android.hotspot2.osulogin
com.samsung.android.clientconnection
com.android.location.fused
com.sec.android.app.personalization
com.samsung.android.apps.wearable.recent
com.samsung.android.watch.watchface.digitalfont
com.samsung.aasaservice
com.samsung.android.watch.watchface.endangeredanimal
com.samsung.android.cidmanager
com.android.bluetooth
com.samsung.android.watch.watchface.companionhelper
com.samsung.sec.android.application.csc
com.samsung.android.samsungnetworklocation
com.google.android.wearable.frameworkpackagestubs
com.samsung.android.watch.watchface.tickingsound
com.samsung.android.mcfds
Click to expand...
Click to collapse
type to restore
pm install-existing <package-name-to-reinstall>
once you are done exit and disconnect:
exit
adb disconnect
~~~ Scenario 5: Pulling Apps ~~~Enter Shell mode typing:
adb shell
then type
pm list packages
Find the package of interest then type
pm path <package-name>
this returns the path of the apk package location, exit shell
exit
now pull it typing:
adb pull <path-to-apk-package> <package-name>.apk
you have pulled the apk into the adb folder...
~~~ End of Scenarios ~~~I have one thing to say, sorry for the caps in advance, but I got to do it
TURN OFF ADB ON WATCHotherwise it will drain your watch battery...
~~~ Don't forget to ~~~
Don't forget to smash the THANKS
PS. if you are super happy and want to thank me, It is highly appreciated if you'd consider supporting me through my Patreon Page
✯ XDA: https://forum.xda-developers.com/m/dante63.7047928/
✯ Reddit: https://www.reddit.com/user/XDA-Dante63/
✯ Telegram: https://t.me/xda_dante63
I am gonna reserve this just in case I need it in the future
Hi, thanks for that, will be helpful.
Has anyone tested disabling samsung pay? Or any other system apps? Just curious if its safe to disable it..
Thanks
strokk said:
Hi, thanks for that, will be helpful.
Has anyone tested disabling samsung pay? Or any other system apps? Just curious if its safe to disable it..
Thanks
Click to expand...
Click to collapse
SHM is a system app and has been disabled, no issues...
You can try disabling Samsung pay, the expected scenario is the watch will call Samsung pay, it doesn't find it returns "no supported app found" or "enable Samsung pay?" Or take you to the playstore or (last or I promise lol) it will switch to another pay method...
Uninstalling is the dangerous command...
someone tried to install google assistant via adb?
Can´t find an apk and have no other watch to extract it -.-
I apologise for dumb question: i always wanted to play with adb (for uninstalling and disabling apps) on my phones...but i didn't have the guts or knowledge. Can i use this guide (to the letter) to do it on my phone?
Including using the minimal adb zip you provided?
I intend to uninstall stuff when my fold3 and watch 4 classic lte arrive
pleitegeier said:
someone tried to install google assistant via adb?
Can´t find an apk and have no other watch to extract it -.-
Click to expand...
Click to collapse
When I get my watch and see that I have it, I will pull and upload it for you...
Diaconescu_Tiberiu said:
I apologise for dumb question: i always wanted to play with adb (for uninstalling and disabling apps) on my phones...but i didn't have the guts or knowledge. Can i use this guide (to the letter) to do it on my phone?
Including using the minimal adb zip you provided?
I intend to uninstall stuff when my fold3 and watch 4 classic lte arrive
Click to expand...
Click to collapse
No question is dumb and yes you can use the guide as a reference, just keep in mind that packages of phone are different than the watch, also, on the phone you can disable system apps but you can't uninstall them like the watch (as far as I know) and finally, no need to do adb install on the phone because it's a direct install...
Unless when you said use it on the phone as in execute adb commands on the phone for the watch, yes it will work too...
Thanks! Works great.
There is an error for enabling package: pm enable-user --user 0 <package-name-to-disable> should be : pm enable --user 0 <package-name-to-disable>
renton82 said:
There is an error for enabling package: pm enable-user --user 0 <package-name-to-disable> should be : pm enable --user 0 <package-name-to-disable>
Click to expand...
Click to collapse
Thank you for sharing, I'll fix it right away
Hey man great guide. I noticed you are missing a few apps. I removed it myself
com.samsung.android.wear.calculator
com.microsoft.office.outlook
com.samsung.android.wearable.music
al52025 said:
Hey man great guide. I noticed you are missing a few apps. I removed it myself
com.samsung.android.wear.calculator
com.microsoft.office.outlook
com.samsung.android.wearable.music
Click to expand...
Click to collapse
Thank you for sharing, I'll add them when I can
Will disabling or uninstalling apps cause the watch not to take OTA updates, or any updates to the system at all? I have my TWP3 debloated, and it works with items uninstalled/disabled etc.
AwkwardUberHero said:
Will disabling or uninstalling apps cause the watch not to take OTA updates, or any updates to the system at all? I have my TWP3 debloated, and it works with items uninstalled/disabled etc.
Click to expand...
Click to collapse
You'll still get OTA updates and you might see things you debloated get installed again, depending on what the update has
Dante63 said:
You'll still get OTA updates and you might see things you debloated get installed again, depending on what the update has
Click to expand...
Click to collapse
Thanks. That makes sense. Appreciate you making this thread on how to do all of this.
Hey finally a topic I was looking for !
I have a question. Is that the same as ADB Minimal Fastboot ?
I will buy the GW4 very soon and since I am in China, therefore buying the Chinese version that doesn't come with the Playstore, I was planning to install the Playstore APK on it.
Then I Googled and found a post about using ADB to install APK from PC to WearOS and I found that some use ADB Minimal ADB Fastboot to do that. Reading this post it looks the same, but I haven't used ADB so I can't be sure for sure
[EDIT]
I just click on the ADB link and saw that it was ADB Minimal Fastbook, my bad I haven't checked on the link first. Well awesome nice and thanks for the post!
Do you guys think that I can install the Playstore APK on the GW4 (China version doesn't have Playstore and I work in China now) ?
Dante63 said:
or if you have cmd-here.exe, run it...
type the following:
adb connect <IP>
(if it's your first time, check your watch for RSA authentication and allow the PC to connect)
Now here is the list of scenarios...
~~~ Scenario 1: Installing Apps ~~~Place the apk in adb folder then type:
adb -s <IP> install <apk-name>.apk
once you are done disconnect:
adb disconnect
~~~
Click to expand...
Click to collapse
Here when you say "type the following: adb connect <IP>", where do I find the IP I should replace "IP" with?
Same question for "adb -s <IP> install <apk-name>.apk"
Sorry if the question sound stupid, I haver used the command window, I'm a total novice
Mini Jay said:
Here when you say "type the following: adb connect <IP>", where do I find the IP I should replace "IP" with?
Same question for "adb -s <IP> install <apk-name>.apk"
Sorry if the question sound stupid, I haver used the command window, I'm a total novice
Click to expand...
Click to collapse
On your watch. When you enable adb over wifi, it'll show you your ip address. Something like 192.168.1.1:5555
AwkwardUberHero said:
On your watch. When you enable adb over wifi, it'll show you your ip address. Something like 192.168.1.1:5555
Click to expand...
Click to collapse
thanks!
Mini Jay said:
thanks!
Click to expand...
Click to collapse
Welcome!
HELLO GUYS AND GIRLS
IVE CREATED THIS TOOL FOR THOSE NEW TO XDA, ADB OR ARE JUST LAZY
i reluctantly got a watch 4 today (i have the gear 2 with ir and camera)
and have been holding off for a decent upgrade with ir and camera, but well, it never came, so here i am with a watch 4
This will automate your adb needs
(mostly)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
!!! DISCLAIMER !!!
I DO NOT ACCEPT RESPONSIBILTY FOR ANYTHING THAT MAY HAPPEN USING THIS TOOL
YOUR USING IT AT YOUR OWN RISK
FIRST OFF DOWNLOAD ADB - FASTBOOT
v1.5.2 exe - Windows - GDrive - Dropbox
place it in c:\adb it should look something like this
Now download the tool place it in c:\adb
(in changelog below)
Open it with a double click and follow onscreen instructions
Thanks to
73sydney
more features coming soon
is there anything you'd like added to the push / pull menu ?
CHANGELOG
V1.0 CREATED TOOL
V1.1 ADDED FRAMEWORK RES EXTRACTION AND CONVERSION, BOOTANIMATION PULL
V1.2 BUGFIXES
V1.3 FIXED BUGS ADDED NEW FETURES (SEE SCREENS BELOW)
V1.4 BUG FIX
v1.6 SIMPLIIED CONNECTION TO WATCH
DOWNLOAD LINKS
\/\/\/
\/\/
\/
GDRIVE - MEGA - DROPBOX
HELP
Spoiler
TO ENABLE DEVELOPER OPTIONS ON THE PHONE
1st - Go into your setting
2nd - Scroll down to "About Phone", open it
3rd - Open "Software Information"
4th - Press "Build Number" several times until you see a pop up window counting down from 3 until developer options are enabled
TO ENABLE USB DEBUGGING ON THE PHONE
1st - Enable "Developer Options" (see above)
2nd - Open the Developer Options setting, in settings, at the bottom of the page
3rd - Scroll down to the "Debugging" and press the "USB Debugging" button
TO ENABLE DEVELOPER OPTIONS ON THE WATCH
1st - Go into your setting
2nd - Scroll down to "About Watch", open it
3rd - Scroll down to "Software"
4th - Press "Software Version" several times until you see a pop up window stating developer options are enabled
TO ENABLE ADB DEBUGGING ON THE PHONE
1st - Enable "Developer Options" (see above)
2nd - Open the Developer Options setting, in settings, 4TH up from the bottom of the page
3rd - Scroll down to the "Adb Debugging" and press the button
4th - Scroll down to "Debug over WiFi" and press the button
TO FIND YOUR WIFI IP
Ist - Enable "Developer options" on the watch (see above)
2nd - Enable "ADB Debugging" on the watch (see above)
3rd - look on the "Debug over wifi" switch to find it
BLOATWARE LIST
Spoiler
pm uninstall -k --user 0 com.samsung.android.watch.watchface.myphoto
pm uninstall -k --user 0 com.samsung.android.watch.watchface.mystyle
pm uninstall -k --user 0 com.samsung.android.watch.compass
pm uninstall -k --user 0 com.samsung.android.watch.weather
pm uninstall -k --user 0 com.samsung.android.messaging
pm uninstall -k --user 0 com.samsung.android.watch.watchface.basicclock
pm uninstall -k --user 0 com.samsung.android.watch.watchface.simpleclassic
pm uninstall -k --user 0 com.samsung.android.watch.watchface.dualwatch
pm uninstall -k --user 0 com.samsung.android.samsungpay.gear
pm uninstall -k --user 0 com.samsung.android.app.reminder
pm uninstall -k --user 0 com.samsung.android.watch.watchface.together
pm uninstall -k --user 0 com.samsung.android.watch.watchface.typography
pm uninstall -k --user 0 com.samsung.android.watch.watchface.large
pm uninstall -k --user 0 com.samsung.android.watch.watchface.animal
pm uninstall -k --user 0 com.google.android.apps.maps
pm uninstall -k --user 0 com.samsung.android.watch.watchface.aremoji
pm uninstall -k --user 0 com.samsung.android.watch.watchface.analogmodular
pm uninstall -k --user 0 com.samsung.android.watch.watchface.emergency
pm uninstall -k --user 0 com.samsung.android.watch.watchface.simpleanalogue
pm uninstall -k --user 0 com.google.android.apps.wearable.retailattractloop
pm uninstall -k --user 0 com.samsung.android.bixby.wakeup
pm uninstall -k --user 0 com.samsung.android.watch.watchface.bitmoji
pm uninstall -k --user 0 com.android.providers.userdictionary
pm uninstall -k --user 0 com.samsung.android.watch.watchface.superfiction
pm uninstall -k --user 0 com.samsung.android.watch.worldclock
pm uninstall -k --user 0 com.samsung.android.watch.watchface.endangeredanimal
pm uninstall -k --user 0 com.samsung.android.video.wearable
pm uninstall -k --user 0 com.samsung.android.watch.watchface.basicdashboard
pm uninstall -k --user 0 com.google.android.wearable.assistant
pm uninstall -k --user 0 com.samsung.android.watch.watchface.livewallpaper
pm uninstall -k --user 0 com.samsung.android.watch.watchface.healthmodular
pm uninstall -k --user 0 com.samsung.android.watch.watchface.weather
pm disable-user --user 0 com.samsung.android.bixby.agent
pm uninstall -k --user 0 com.samsung.android.shealthmonitor
if you want to remove individual items
please go here and give [B]marco_lu[/B] a thanks, this is his list
SCREENS
Spoiler
Excited for this!
ADDED FRAMEWORK RES EXTRACTION AND CONVERSION, BOOTANIMATION PULL
Hi, I have downloaded your batch file and I see that you have added lots and lots of options, from experience I know it is a lot of hours of trial and error.
I have a doubt about the options, what is the use of introducing an audio in the notifications folder of the watch? I think for now you can't replace those default sounds with custom sounds, or am I wrong?
I know that for ringtones yes you can put a custom audio, but at least I don't know how to put a custom audio in the alarm and notifications sound.
In the case of ringtones you do not need root because you can put customized sounds in the sdcard, in "/sdcard/Ringtones/".
bernarbernuli said:
Hi, I have downloaded your batch file and I see that you have added lots and lots of options, from experience I know it is a lot of hours of trial and error.
I have a doubt about the options, what is the use of introducing an audio in the notifications folder of the watch? I think for now you can't replace those default sounds with custom sounds, or am I wrong?
I know that for ringtones yes you can put a custom audio, but at least I don't know how to put a custom audio in the alarm and notifications sound.
In the case of ringtones you do not need root because you can put customized sounds in the sdcard, in "/sdcard/Ringtones/".
Click to expand...
Click to collapse
i only got the watch today, im used to tizen not wear os, so im currently learning, so im doing a lot of the foundation work now
in hope of root in the future
gav83collins said:
i only got the watch today, im used to tizen not wear os, so im currently learning, so im doing a lot of the foundation work now
in hope of root in the future
Click to expand...
Click to collapse
Welcome to Wear OS then, in case it helps you some time ago I made a similar tool that I made also in a batch file (although I converted it later to an executable .exe file).
Hacks, tricks, news and updates for Wear OS smartwatches (TicWatch, Fossil, Missfit, Skagen, Xiaomi, Oppo, Suunto...)
Hi, I use and enjoy a Ticwatch Pro 3 watch, and before I had a TicWatch Pro 2020. During this time I have been learning tips for this watch, and some others I knew from when I was playing around with smartphones and I have moved them to the Wear...
forum.xda-developers.com
The link in a very long post, if it doesn't take you to the tool look inside the post. "All-in-One tool for Windows, Wear OS Tools".
If you are interested in the .bat file to get ideas, ask me privately without obligation.
bernarbernuli said:
Welcome to Wear OS then, in case it helps you some time ago I made a similar tool that I made also in a batch file (although I converted it later to an executable .exe file).
Hacks, tricks, news and updates for Wear OS smartwatches (TicWatch, Fossil, Missfit, Skagen, Xiaomi, Oppo, Suunto...)
Hi, I use and enjoy a Ticwatch Pro 3 watch, and before I had a TicWatch Pro 2020. During this time I have been learning tips for this watch, and some others I knew from when I was playing around with smartphones and I have moved them to the Wear...
forum.xda-developers.com
The link in a very long post, if it doesn't take you to the tool look inside the post. "All-in-One tool for Windows, Wear OS Tools".
If you are interested in the .bat file to get ideas, ask me privately without obligation.
Click to expand...
Click to collapse
yeah i do the same too usually, but users cant modify the .exe so easy, and seeing they need to input their own wifi ip address the method im using afaict is the easiest for them
UPDATED OP
added new screens, new features, fixed gdrive permission for request of files
Added youtube video to screens
It's not the year 2000, if you're holding out for ir you'll be waiting a long long time..
TheIntruder said:
It's not the year 2000, if you're holding out for ir you'll be waiting a long long time..
Click to expand...
Click to collapse
lol its a 2014 model and i held out long enough, and thats why im now here
new tool with simplified connection to watch in op
Hi, may i have full system dump for sgw4
@gav83collins you may want to look into trying to partner or work with the dev of Adb app control and see about combining your work into one awesome tool. Because I have used your tool on my watch and his tool on my fold3 and watch. So the uses are many
'cecho' is not recognized as an internal or external command, operable program or batch file.
Any suggestions?
same here. and doesn't seem to remove anything. i've tried the ip address, and ip address with port number. it says complete on every step but nothing actually happens.
version 1.6 was not working so look at the .bat
in line 164 replace:
!ADB_PATH!\adb.exe connect %_IP%
by
!ADB_PATH!\adb.exe connect "!_IP!"
the ip is hardcoded in 192.168.0.19
to change this you have to replace all:
192.168.0.19
by
%_IP%
and for the console to be seen in colors and the "cecho" error does not appear, you have to download this: LINK CECHO