GPS Update Time - MTCD Android Head Units Q&A

Can I change the GPS update time on an Isudar PX6 MTCE device with Android 10? I am satisfied with the manufacturer's rom and don't want to install a custom rom.

Related

looking for (almost) PX5 stock 6.0 rom with root/xposed and a newer mcu

Is there somewhere a website where i can download stock roms or almost stock roms for my head unit?
I upgraded my system from PX3 to PX5 some months a go by purchasing a PX5 som board from witson.
My SOM board is from the seller witson and has MCU:
MTCD_HLA_V2.52_1
Currently my PX5 head unit (rk 3386) is runing latest Malayks rom.
I want to set the unit back to stock rom but do want root access and xposed installed, a factory reset will not set back the original rom, sadly i do not have a backup of the rom.
I only have the original rom from my PX3 som board, don't believe i can use this ROM on my PX5 board.
Also i am looking for newest MCU, my seller reports they do not have this unit anymore and the new unit is currently on android 7, the last MCU they had was 2.52 and they have no newer ones,
The manuafactor is Hualingan (= HLA), maybe someone as a newer MCU which i can download?

Xtrons pb78attp mcu

I flashed an MCU Update to my XTRONS PB78ATTP without checking with version is installed.
results in problem with wheel controls not working.
can someone tell me witch MCU version is installed on the XTRONS PB78ATTP?

right update file?

Hello
I have a px30 android navi with mtce "software" it is Android 8.1
i found now on the https://yadi.sk/d/umCvHqCDzHccr page the folder RockChip PX30 Android 9.0
Is it posibill to update my radio with this file?
If not..is there a other update to android 9?
if i am not happy...is there a solution to make a nandroid backup from my Radio in the status from now?
Thanks for help
If your headunit is a PX30, then maybe.
Your "dcmu" under settings should look something like this i guess: MTCE_??_?.?? (mine for example is MTCE_MX_3.06) In your case it should state GS
As of my current knowledge, there is no root for 8.1 devices yet, just 8.0 and below (with the custom roms from hal9k or malaysk).
deadmeiker said:
Hello
I have a px30 android navi with mtce "software" it is Android 8.1
i found now on the https://yadi.sk/d/umCvHqCDzHccr page the folder RockChip PX30 Android 9.0
Is it posibill to update my radio with this file?
If not..is there a other update to android 9?
if i am not happy...is there a solution to make a nandroid backup from my Radio in the status from now?
Thanks for help
Click to expand...
Click to collapse
Hi,
Did you manage to upgrade to Android 9.0? I have tried several times but have been unable to do it. Always end up getting an error message.
Cheers.
No.. I wase to scary to brick my device

How to return from hal9k to original software

Dear all
I have chs px6 rk3399 with original android 9 , i flash hal9k software and i like to return to the original software i have the software and try with SDcard Usb and it refused to install "regestred error" is there any way please.
nokiagird said:
Dear all
I have chs px6 rk3399 with original android 9 , i flash hal9k software and i like to return to the original software i have the software and try with SDcard Usb and it refused to install "regestred error" is there any way please.
Click to expand...
Click to collapse
This is what I did some time ago: I put the stock firmware in a SD card (at that moment it was the latest update HA2_rk3399_9.0_ota(20191210)升级包.zip) and flashed it, then everything was back to stock. :good:

Rockchip rk3399 MCU cusp px6

Hi everyone, I'm kinda new here so this topic might have been up but couldn't find on a search. I have a Android head unit px6 MCU rk3399 rockchip for a 2012 Sierra Denali and it has no buttons other than a small reset hole that only restarts the unit. I was able to root it runs Android 9 but I can't get viper4android or any type dolby installed because when updating the su binary it bricks the unit. Also cannot get to bootloader. It's like it doesn't have one. Tried reiboot for Android and can get it to recovery but that's it. I was curious if anyone has been able to figure this thing out. Like installing a custom recovery, TWRP... Any advice would help. Also I was wondering if it is possible to create a bootable Android flash drive for Android 9? Thanks in advance and if I'm out of line asking or if I'm in the wrong place asking this you could tell me to f-off and I'll understand

Categories

Resources