mi flash tool help - Xiaomi Poco F2 Pro (Redmi K30 Pro) Questions & Ans

hi all
using mi flash to install back bootlop poco f2
i try to do the installation via fastboot and its over 120 Minth and not finish
glad for help

use xiaomi tool v2

https://xiaomiflashtool.com/

Related

Help! Xiaomi bricked

Hi,
I was flashing a new rom in my Mi4c when my laptop chrashed ( bluescreen). So now my xiaomi doen't turn on ( keeps showing the xiaomi logo) and I also can't enter in recovery mode ( I had the twrp from team superluminal).
I'm trying to flash a rom with fastboot but when I use the MiFlash it gives the error " echo mismatching image and device". I already downloaded more than 1 time the newest rom for the Xiaomi Mi4c so I know that I'mt trying to flash the correct rom.
Also, I tried to flash manually using the adb but the xiaomi is not detected using this method....
Can someone help me??
See here if this helps http://en.miui.com/thread-170110-1-1.html
post #7

[Completed] Help on installing twrp recovery on redmi 3s

Hello people,
I am very new android flashing. I have attempted to flash my xiaomi redmi 3s prime.
I did some thing wrong and now my phone is tuck on mi logo
I have 2 questions please help with step wise process towards fix.
1- when i am downloading twrp for my device from their website.
Its downloading in .IMG file.
The issue is how do extract it ? As in when i open with rar it not getting extracted .
Lot of forums says extract it and launch fastboot.exe BUT HOW TO EXTRACT IT.
2- as my phone is stuck on mi logo how i can install twrp recovery. As when i type adb devices .. its doesn't show any device. So hot to get detected and install twrp.
Note - as this is the first time i m doing it. Please share detailed steps so that i can follow them.
Thank you
Rahul gaur
XDA Visitor said:
Hello people,
I am very new android flashing. I have attempted to flash my xiaomi redmi 3s prime.
I did some thing wrong and now my phone is tuck on mi logo
I have 2 questions please help with step wise process towards fix.
1- when i am downloading twrp for my device from their website.
Its downloading in .IMG file.
The issue is how do extract it ? As in when i open with rar it not getting extracted .
Lot of forums says extract it and launch fastboot.exe BUT HOW TO EXTRACT IT.
2- as my phone is stuck on mi logo how i can install twrp recovery. As when i type adb devices .. its doesn't show any device. So hot to get detected and install twrp.
Note - as this is the first time i m doing it. Please share detailed steps so that i can follow them.
Thank you
Rahul gaur
Click to expand...
Click to collapse
Thread closed as duplicate
https://forum.xda-developers.com/general/xda-assist/help-installing-twrp-recovery-t3541734
Regards
Sawdoctor

Question How to change the boot logo of Poco X3 Pro/vayu?

is someone here who can do a flashable zip with thouse jpg ,i tried with a splash logo maker and didnt worked ,if somoane have an idea pls respond !!!
I found this thread, and a creation tool.
[TWRP][Fastboot] Splash screen collection for Poco F2 Pro / Redmi K30 Pro
Cool. Thx for sharing this.
forum.xda-developers.com
zip file for flash via TWRP (Not tested)
img file flash via fastboot with ↓
fastboot flash logo logo.img
tim198311 said:
I found this thread, and a creation tool.
[TWRP][Fastboot] Splash screen collection for Poco F2 Pro / Redmi K30 Pro
Cool. Thx for sharing this.
forum.xda-developers.com
zip file for flash via TWRP (Not tested)
img file flash via fastboot with ↓
fastboot flash logo logo.img
Click to expand...
Click to collapse
Thank you i will try it!
It worked trough recovery ,thank you
Antonio7489 said:
It worked trough recovery ,thank you
Click to expand...
Click to collapse
is it working on POCO X3 pro
shroud.exe.404_ said:
is it working on POCO X3 pro
Click to expand...
Click to collapse
it worked for me via fastboot
I've made one. My phone is Poco X3 pro if you're wondering.
Current ROM: Hydrogen OS (OnePlus 8T Port)
Antonio7489 said:
is someone here who can do a flashable zip with thouse jpg ,i tried with a splash logo maker and didnt worked ,if somoane have an idea pls respond !!!
Click to expand...
Click to collapse
In Mi Themes store you can select custom boot screens
tim198311 said:
I found this thread, and a creation tool.
[TWRP][Fastboot] Splash screen collection for Poco F2 Pro / Redmi K30 Pro
Cool. Thx for sharing this.
forum.xda-developers.com
zip file for flash via TWRP (Not tested)
img file flash via fastboot with ↓
fastboot flash logo logo.img
Click to expand...
Click to collapse
Can you please make a splash screen for poco x3 pro, which looks exactly like Stock splash screen with a locked bootloader. Please make it.
sachin karinki said:
Can you please make a splash screen for poco x3 pro, which looks exactly like Stock splash screen with a locked bootloader. Please make it.
Click to expand...
Click to collapse
To get the stock boot logo you need to flash MIUI again.
tim198311 said:
I found this thread, and a creation tool.
[TWRP][Fastboot] Splash screen collection for Poco F2 Pro / Redmi K30 Pro
Cool. Thx for sharing this.
forum.xda-developers.com
zip file for flash via TWRP (Not tested)
img file flash via fastboot with ↓
fastboot flash logo logo.img
Click to expand...
Click to collapse
Is this working perfectly? Just very scary for my phone
yarnom7767 said:
Is this working perfectly? Just very scary for my phone
Click to expand...
Click to collapse
Its safe i think , some phones bricked becouse of it. I will not recomand you flashing a custom boot logo on MIUI.
sachin karinki said:
Can you please make a splash screen for poco x3 pro, which looks exactly like Stock splash screen with a locked bootloader. Please make it.
Click to expand...
Click to collapse
There you go, made by me for my phone.
https://anonfiles.com/Jfu14a44xc/PocoX3Pro-no-lock-splashscreen_img
You need to be in fastboot and on your PC you need to enter the command "fastboot flash logo PocoX3Pro-no-lock-splashscreen.img". Made with https://github.com/penn5/logo-xiaomi
R00TMe said:
There you go, made by me for my phone.
https://anonfiles.com/Jfu14a44xc/PocoX3Pro-no-lock-splashscreen_img
You need to be in fastboot and on your PC you need to enter the command "fastboot flash logo PocoX3Pro-no-lock-splashscreen.img". Made with https://github.com/penn5/logo-xiaomi
Click to expand...
Click to collapse
Flashing from recovery not possible ?
sachin karinki said:
Flashing from recovery not possible ?
Click to expand...
Click to collapse
You had 0 PC to does that ? You can also try to make this command in the recovery terminal but I don't really know what command.
could someone extract x3 pro default splash images from .img? wanna just edit fastboot but keep others unchanged
Could anyone make a black google logo img?

The System Has Been Destroyed

So I tried to install TWRP from this website
Download And Install TWRP on Xiaomi Poco X3 NFC - FlashXiaomi
Download And Install TWRP on Xiaomi Poco X3 NFC allows facilitates the use of custom software, including the latest custom ROMs, kernels...
flashxiaomi.com
& stupidly me replaced the twrp file with "twrp-3.4.0-15-surya-mauronofrio" then finished the following instruction( I think the twrp won't match with vbmeta.img stuff like that) after that my phone stuck on logo and try to turn off & on it say Destroyed like the title. pls Help me
Hello. When trying to boot, try to catch fastboot, it should come in. I also had one and I could do it fastboot + miflash.
rambo1155 said:
Hello. When trying to boot, try to catch fastboot, it should come in. I also had one and I could do it fastboot + miflash.
Click to expand...
Click to collapse
yeah I'm to confident using CMD, that more safe & likely work with Mi Tool. ty anyway
I had similiar situation and all I did was I flashed different version of TWRP and it worked.

Question Well I Bricked my Poco X5 Pro after 1 week

Im trying to install generic TWRP
I successfully unclocked bootleader after waiting for a week
but i ran into partitition unknown error while flashing TWRP
now its on bootloop
Any help?
what command are u using to flash the image file?
Code:
fastboot flash recovery twrp.img
give an error - FAILED (remote: '(recovery_a) No such partition')
then i tried
Code:
fastboot getvar curent-slot
give me a
then i did
Code:
fastboot flash boot_a twrp.img
see the problem is there is no supported or officol twrp fpr poco x5 pro
So i tried poco x3 twrp
try this fastboot flash boot_ab twrp.img
this device already received unofficial orange fox recovery
Recovery For Redwood
ORANGEFOX Recovery For Poco X5 Pro
www.pling.com
It may be completely off target, but how about using the slot b side?
info
-
-
Muganz said:
info
Click to expand...
Click to collapse
hey, can you link me that telegram group?
scorthyn said:
hey, can you link me that telegram group?
Click to expand...
Click to collapse
there u go..
Poco X5 Pro | Redmi Note 12 Pro Speed | Official
Poco X5 Pro OFFICIAL Community • Read rules (/rules), English only • Channel: @PocoX5ProUpdate • Photography group: @PocoX5ProPhotography • Off-Topic group: @PocoOffTopic • Customization group: @PocophoneCustomization
t.me
I already rooted it without TWRP
I never really needed TWRP
I just needd the root.
I dont want to test broken Untested roms on it yet.
I just wanted to uninstall system apps
And unlock few settings thats it
Bilalll said:
I already rooted it without TWRP
I never really needed TWRP
I just needd the root.
I dont want to test broken Untested roms on it yet.
I just wanted to uninstall system apps
And unlock few settings thats it
Click to expand...
Click to collapse
How did you root it without twrp? Just using fastboot/adb with an unlocked bootloader I assume? Thank you.
Zylam Marex said:
How did you root it without twrp? Just using fastboot/adb with an unlocked bootloader I assume? Thank you.
Click to expand...
Click to collapse
First download device original rom from the redmi website
Unlock bootloader after registering ur phone
Unlock device from developers options
Wait for 7 days
Do what is required
Download magisk
Open original rom and copy boot. Img
Open magisk and patch the copied boot. Img
reply to this post after you reach here
Bilalll said:
First download device original rom from the redmi website
Unlock bootloader after registering ur phone
Unlock device from developers options
Wait for 7 days
Do what is required
Download magisk
Open original rom and copy boot. Img
Open magisk and patch the copied boot. Img
reply to this post after you reach here
Click to expand...
Click to collapse
Oh nice, thank you for the rapid response. Unfortunately I do not yet have a X5 Pro, I'm actually waiting for custom roms to appear, ever since Xiaomi baked gestures into the stock launcher I stopped buying phones until I could custom rom. Nova Launcher is a must for me and using it without gestures feels wrong. I was just curious as to how you rooted without a custom recovery. Very interesting you are using magisk on a different device to patch the boot image in the fastboot rom, which I assume you will flash using the mi flash. Is that what's happening? Thank you.
Zylam Marex said:
Oh nice, thank you for the rapid response. Unfortunately I do not yet have a X5 Pro, I'm actually waiting for custom roms to appear, ever since Xiaomi baked gestures into the stock launcher I stopped buying phones until I could custom rom. Nova Launcher is a must for me and using it without gestures feels wrong. I was just curious as to how you rooted without a custom recovery. Very interesting you are using magisk on a different device to patch the boot image in the fastboot rom, which I assume you will flash using the mi flash. Is that what's happening? Thank you.
Click to expand...
Click to collapse
No need to flash with mi flash after u patch it with magisk.
After magisk step
U will boot into fastboot and install the patched boot. Img
U may have 2
One is for fastboot rom
2nd is for recovery rom
Depends on the rom u falshed during flashing using mi flash tool
For fastboot u will use receovey comand
For bootloader rom u will use boot command while flashing boot. Img
Hope it will help u and others
Also yeah these are the silly things I wanted to root this phone. Navigation or lockscreen wallpaper suggestions or annoying box icons etc etc
Bilalll said:
First download device original rom from the redmi website
Unlock bootloader after registering ur phone
Unlock device from developers options
Wait for 7 days
Do what is required
Download magisk
Open original rom and copy boot. Img
Open magisk and patch the copied boot. Img
reply to this post after you reach here
Click to expand...
Click to collapse
im trying to install magisk. can u help me with steps 7 and 8. i dont really know what to do there. I found Global 14.0.6.0 but there are multiple links eg. fastboot/recovery which ROM to download?
is magic hide works? i want it to pass safetynet checks.
thx
Szajkop said:
im trying to install magisk. can u help me with steps 7 and 8. i dont really know what to do there. I found Global 14.0.6.0 but there are multiple links eg. fastboot/recovery which ROM to download?
is magic hide works? i want it to pass safetynet checks.
thx
Click to expand...
Click to collapse
Install magisk apk first
Go check ur Ramdisk Status
If its Yes
Download Fastboot rom
If no
Download recovery
After downloading the above
U will find boot. Img inside
Next is just going into fastboot mood
Run fastboot receovery command if ita receovery
Or
Run fastboot boot command if its fastboot
Check the exact commands on the good
Sorry for typos or bad explaination
Bilalll said:
No need to flash with mi flash after u patch it with magisk.
After magisk step
U will boot into fastboot and install the patched boot. Img
U may have 2
One is for fastboot rom
2nd is for recovery rom
Depends on the rom u falshed during flashing using mi flash tool
For fastboot u will use receovey comand
For bootloader rom u will use boot command while flashing boot. Img
Hope it will help u and others
Also yeah these are the silly things I wanted to root this phone. Navigation or lockscreen wallpaper suggestions or annoying box icons etc etc
Click to expand...
Click to collapse
If I'm not wrong, you can do these with the debloater via usb debugging
Bilalll said:
Code:
fastboot flash recovery twrp.img
give an error - FAILED (remote: '(recovery_a) No such partition')
then i tried
Code:
fastboot getvar curent-slot
give me a
then i did
Code:
fastboot flash boot_a twrp.img
see the problem is there is no supported or officol twrp fpr poco x5 pro
So i tried poco x3 twrp
Click to expand...
Click to collapse
sir how to fix, same for me
Muganz said:
what command are u using to flash the image file?
Click to expand...
Click to collapse
sir can you help me? same for me
after done the unlock bootloader, i flash rom but the problem is i bypass the platfirm tools, i did is..
got to cmd
c: \users\karen\Downloads\fastboot flash boot c:\users\karen\Downloads\orangefox.img
after this in the youtube "how to install orange fox" i turn off and volume up
then my phone is bootloop
then i flash again twrp recovery but it says error, now my phone is always in fastboot
do you know how to fix sir
thank you 🥹🥹

Categories

Resources