Hello dear friends! Is there a way to flash the oppo find x2 pro using msmdownloadtools? I've got the globar version (CPH2025), and I want to flash the whole device firmware (ofp file). Is there a way to do this, and if there is, where can I find the ofp firmware, because all I can find is the cph2023 ofp file.
Mitar00 said:
Hello dear friends! Is there a way to flash the oppo find x2 pro using msmdownloadtools? I've got the globar version (CPH2025), and I want to flash the whole device firmware (ofp file). Is there a way to do this, and if there is, where can I find the ofp firmware, because all I can find is the cph2023 ofp file.
Click to expand...
Click to collapse
Hey, I've tried this and I don't think there is one available. I think each MSNDownloadTool is specific to each device and ofp firmware. Where did you get the OFP file from btw? There was one floating around that was purchased for $10 from ROMDOWNLOADS.COM or something, link to the file is here https://forum.xda-developers.com/find-x2-pro/help/x2-pro-chinese-version-living-eu-t4101395/page3
But I think these sites are selling total rubbish, the one in the above turned out to be not for the X2 Pro at all but I think for the Find X?
Anyway, even if you fo get the correct ofp file I think you need the right version of MSNDownloaderTool with it I've tried lots of hacked versions and none have worked.
Curious, if you have the Global version, why do you want to flash using OFP?
Yes, that's the one I saw, on my current version there is some bloatware that I can't remove using ADB, so I thought that I could get rid of it by flashing the global ofp file. Thanks!
Related
It seems like there are a few people having trouble going back to stock and getting everything working.
As always, this requires an unlocked bootloader. If you don't have an unlocked bootloader then search google for a $5 service that does. It is what I did.
I flashed Project treble on my TA-1054. It worked great except it kept saying "insert SIM" when there was already a sim card inside, so I could not use it.
I tried to go back to stock but that firmware file on that google drive thread was corrupted, bad upload. Took me a few days to source this original firmware.
There is a tool called OST ( around 115MB), and a patch that comes with it (the smaller file less than 1MB)
The firmware is almost 2 GB
Download everything, including firmware.
1. Install the OST tool.
2. Replace the EXE file in the program files with the patch file you downloaded.
3. Delete the Onlineupdatetoolexe.config file. If you don't do this, the program will not start correctly.
4. Put phone into download mode ( either by powering it off, pluging into USB cable and immediately hold power and volume down. Or if you can boot into android with ADB debugging, just do a adb reboot bootloader.
5. Pick firmware file and click next.
THe first 2 times I tried this, It hanged at the last second. Third time was a charm. Give it time. Use a good USB cable.
I assume that this is the same way to flash other firmware files for other devices.
As soon as i get my hands on a android one firmware, I will flash it.
Or if anyone can guide me on how to extract the firmware on my TA-1045 USA version and flash it to my TA-1054 Chinese , let me know. Cheers.
Google drive folder with all the files I uploaded.
https://drive.google.com/open?id=1NbzO6lfSGacjM2wqrtBg3jMpljsZswne
Thanks bro...I am downloading it.
PL2-2380-0-00WW-B01.NBx.zip is global firmware name. firmware size is 4gb.
thanks! for extract is with nb0 tools FIH Mobile v3.4
https://drive.google.com/open?id=1cSgjrZUxIsN7oLbo7AP-RnILDZdswmB-
its android one firmware. I have no tool for flash...plz try and let me know
Flashing now. Will report back after flashing is done. thanks!!
Edit: Looks like the version I have for OST does not read NBX files. Will try to update that and report back. I have ntool but no working username password
I cannot flash the NBX file. I changed it to nb0 but OST LA says cannot read firmware. Is there any other way to flash?
EDIT: I went ahead and purchased a bunch of credits for NTOOL.
I will flash and see if it works!
It fails with the mdtp.img partition (no such partition) . I would think that it would just skip that partition but it did not. I will later try to extract and flash separately
For some reason when I try to flash the golabl firmware using ntool, my bootloader gets locked after the mdtp flashing fails and I have to re-unlock my bootloader and flash the original 7.1 chinese firmware using the OLD version of OST. ( the new one kept saying firmware corrupt)
When I bought the credits for Ntool, I also got access to the downloads section so I will be uploading all the firmwares they have, ( there is like 5 different ones)
I was reading how the nokia &+ users are converting their chinese variants to global variants using the android P beta rom.
We also have a P beta rom so I will be trying to install that to see if it works or not.
As some of you may realize, I am determined to make this happen! The reason is because my USA android One version has only 3gb of ram but the chinese version comes with 4GB.
stealthj said:
For some reason when I try to flash the golabl firmware using ntool, my bootloader gets locked after the mdtp flashing fails and I have to re-unlock my bootloader and flash the original 7.1 chinese firmware using the OLD version of OST. ( the new one kept saying firmware corrupt)
When I bought the credits for Ntool, I also got access to the downloads section so I will be uploading all the firmwares they have, ( there is like 5 different ones)
I was reading how the nokia &+ users are converting their chinese variants to global variants using the android P beta rom.
We also have a P beta rom so I will be trying to install that to see if it works or not.
As some of you may realize, I am determined to make this happen! The reason is because my USA android One version has only 3gb of ram but the chinese version comes with 4GB.
Click to expand...
Click to collapse
can u flash my chinese rom which is nbo format via ntool. I have have ntool but i dont have user name,password, i downloaded rom which u provide.my device still cant connect to mobile data.
NBX format only works on Ntool. but Ntool needs working user name and password to works. OST cant read or flash Nbx format.
if u get Ntool with working user id .. then plz flash my device also via remote mode like teamviewer.
Ntool Bricked my device. the only real restore you can do is by using ost with the stock chinese firmware. edit your apn. why is your data not working?
Global rom cant flash via ntool in Ta1054..showed error in partition. if it will be solved then china to global will be easy process..
I'm eagerly watching your progress. I'm in the same boat sitting on a TA-1054 wanting to get on Oreo without chinese firmware :x
Keep up the good work. It is really appreciated!
Edit: By the way, are the custom and original chinese firmware files available anywhere?
I saw someone mention a firmware in the google drive for TA-1054 but I'm uncertain whether that is the official one or the custom one.
Its the Chinese official ROM you get it from Google drive folder in Nokia 6 mena firmware topic
safron35 said:
Its the Chinese official ROM you get it from Google drive folder in Nokia 6 mena firmware topic
Click to expand...
Click to collapse
Actually, the one in the mena topic was corrupted for me.
I have uploaded a good version in the first post of this thread. I've only had success flashing it wih OST.
But yesterday Ntool bricked my phone. No download mode, no screen, no usb recognition with windows. I am not really sure what to do now. If i can't get my pc to recognize it then the phone might be dead./ I may do a warranty exchange when i go visit china next month but if they check my bootloader, they will void my warranty. anyone know how to unbrick?
Also. The nokia 7+ forums said that if you flash the android P beta rom, then the chinese vaqriant becomes gloabl.
I went ahead and downloaded the android P beta for 6.1 but now that the phone is bricked I can't really test anything. I will sell my extra 1045 before i get curious and brick that too.
stealthj said:
Actually, the one in the mena topic was corrupted for me.
I have uploaded a good version in the first post of this thread. I've only had success flashing it wih OST.
But yesterday Ntool bricked my phone. No download mode, no screen, no usb recognition with windows. I am not really sure what to do now. If i can't get my pc to recognize it then the phone might be dead./ I may do a warranty exchange when i go visit china next month but if they check my bootloader, they will void my warranty. anyone know how to unbrick?
Also. The nokia 7+ forums said that if you flash the android P beta rom, then the chinese vaqriant becomes gloabl.
I went ahead and downloaded the android P beta for 6.1 but now that the phone is bricked I can't really test anything. I will sell my extra 1045 before i get curious and brick that too.
Click to expand...
Click to collapse
Can you share the link for P beta for 6.1?
Also, I own a TA-1054 model and I am in India. I ordered it from Amazon. It had Android One Oreo firmware preinstalled before I messed up and got loops. Later I flashed a GSI to at least boot it up.
TheImpulson said:
Can you share the link for P beta for 6.1?
Also, I own a TA-1054 model and I am in India. I ordered it from Amazon. It had Android One Oreo firmware preinstalled before I messed up and got loops. Later I flashed a GSI to at least boot it up.
Click to expand...
Click to collapse
Ahh I see. For some reason my sim slots were not working for me with GSI. But mine is dead now, so nothing I can do.
Here is the P link.
https://drive.google.com/open?id=1R5n-JAU_dzKEQ6w0W9ncDr58dqaAKFoc
stealthj said:
Ahh I see. For some reason my sim slots were not working for me with GSI. But mine is dead now, so nothing I can do.
Here is the P link.
https://drive.google.com/open?id=1R5n-JAU_dzKEQ6w0W9ncDr58dqaAKFoc
Click to expand...
Click to collapse
How to flash it?
Edit: Also OnlineUpdaterTool in your 1st post asks for a password. What's the password?
nooby_pls said:
I'm eagerly watching your progress. I'm in the same boat sitting on a TA-1054 wanting to get on Oreo without chinese firmware :x
Keep up the good work. It is really appreciated!
Edit: By the way, are the custom and original chinese firmware files available anywhere?
I saw someone mention a firmware in the google drive for TA-1054 but I'm uncertain whether that is the official one or the custom one.
Click to expand...
Click to collapse
I put the original chinese firmware on the first post.
There is an option to install google play store, but that would make your rom unable to receive updates.
Hey all, has there been any discussion or progress regarding an EDL firmware for the 2020U variant of the Axon 10 Pro yet? I see we have some Chinese and G EDL firmwares released, but not any for the 2020U. I've yet to unlock my bootloader or install TWRP because of no EDL firmware available to fall back on if anything goes wrong. Just curious if there's one available floating somewhere. Thanks!
brian117 said:
Hey all, has there been any discussion or progress regarding an EDL firmware for the 2020U variant of the Axon 10 Pro yet? I see we have some Chinese and G EDL firmwares released, but not any for the 2020U. I've yet to unlock my bootloader or install TWRP because of no EDL firmware available to fall back on if anything goes wrong. Just curious if there's one available floating somewhere. Thanks!
Click to expand...
Click to collapse
It's available on easy-firmware
Unjustified Dev said:
It's available on easy-firmware
Click to expand...
Click to collapse
Thanks for the response UD, however I cannot seem to locate the specific one needed for the 2020U. Half of them are SD Firmwares, and it doesn't specify the region for them. Any help would be appreciated if you can link the correct one. Thanks again.
brian117 said:
Thanks for the response UD, however I cannot seem to locate the specific one needed for the 2020U. Half of them are SD Firmwares, and it doesn't specify the region for them. Any help would be appreciated if you can link the correct one. Thanks again.
Click to expand...
Click to collapse
https://easy-firmware.com/index.php?a=downloads&b=file&id=165761it doesn't specify region because they all have different model numbers. A2020U is the only US model. Link not working, but it's the ones the correlate with your build number for instance b10 or b04 not the PV that's preproduction firmware used for testing
Sent from my ZTE A2020U Pro using Tapatalk
Unjustified Dev said:
https://easy-firmware.com/index.php?a=downloads&b=file&id=165761it doesn't specify region because they all have different model numbers. A2020U is the only US model. Link not working, but it's the ones the correlate with your build number for instance b10 or b04 not the PV that's preproduction firmware used for testing
Sent from my ZTE A2020U Pro using Tapatalk
Click to expand...
Click to collapse
How do I create an EDL version out of one of those files?
MlM1c said:
I really did a number on my phone and basically now its on EU 1.8. I can't find the U firmware anywhere so please if you have or know where I can obtain it please share.
Thanks a ton!.
Click to expand...
Click to collapse
https://www.androidfilehost.com/?w=files&flid=313083
MlM1c said:
Thanks soo much!. One thing though is I'm trying to get it to flash with MiFlash but ends in an error. The EU firmware worked with MiFlash so I'm wondering what I need to do with these files in order to get it to flash. Thanks once again.
Click to expand...
Click to collapse
Did you add the firehose programmer?
Bricked Axon 10 pro
I bricked my Axon 10 pro Us version by trying to unlock the bootloader via the EDL tool, All my phone does is boot into fastboot or just a boot loop and the bootloader did not unlock. I'm new to rooting and stupidly tried this on my daily driver phone. Any help would be greatly appreciated.
I have done some research on this and it turns out i didn't do oem unlocking when i turned on usb debugging, so the issue is that the phone will not boot to the os to enable oem unlocking and the bootloader is still locked so i can't even install a stock rom to it. Anyone have any ideas how i can get an OS on the device or enable oem unlocking through fastboot or any other solution that might help
?
I wonder if it would be possible to use the Qualcomm firmware tool to reinstall stock firmware.
So I can get the region setting back?
koloure2211 said:
I wonder if it would be possible to use the Qualcomm firmware tool to reinstall stock firmware.
So I can get the region setting back?
Click to expand...
Click to collapse
IV tried to use that Qfil and MSM downloader , I can't seem to get it working at all everything either asks for a password or it can't see my stock ROM file on my pc
Sent from my CPH2025 using Tapatalk
Okay, worth a try. Just a thought
I was looking for a firmware file, for rooting my Huawei tablet with.
But I'm not able to find the corresponding stock build to the one I'm using now.
It seems that Huawei has taken their sites offline which provided all the ROM-files for recovery etc?
I've found an alternative, Huawei Firm Finder, but it seems it does not offer the precise ROM I'm using now on the tablet.
Let's say I'm using 8.0.0.360 now, then the most recent I can find is 8.0.0.328. I'm not sure if I can use an older version for recovery or rooting.
But now I've found out it's also possible to download and recover the tab with the newest firmware when booting it into "Huawei eRecovery".
It seems that, when looking to it's size, it downloads a file of a similar size, after which it runs recovery with it.
But I was wondering if I could obtain this file via this way. If it's downloading a file and recovering from it, it means it has to be stored somewhere. Is it possible to obtain this file?
I've been looking for a way to "fix" this phone for almost 1 week now. I've disassembled it and managed to note an alphanumeric sequence on its motherboard which I believe is its model.
First things first: this phone's touch screen is not working, but I've checked the motherboard and it seems just fine, which led me to believe there's a problem with the firmware, then I've checked the firmware using recovery mode and it seemed odd, it seemed like the phone isn't using its original firmware.
Here's the info that I found using recovery mode:
SW Ver.
alps-mp-m0.mp1-V2.39 _magc6580.we.c.m_P32
Custom Build Veno. :
V207IF3_QHD1200_M_V1.0_2_16_20200808_1758_V1.0.5_B125_HUAX_V50C3_WELCOME_S20_PLUS_PRO_DS
I'm attaching pictures too.
This phone was handed to me, so I have no reference at all. I've searched everywhere I could online and I couldn't find this model for sale, I couldn't even find a phone that looks exactly like this, but some were pretty close, like the Huawei P40 and the S20+ Pro clone, but after searching for that alphanumeric sequence, which I believe it's the actual model number, I've come across the WOLKI WS680, but I couldn't find its firmware for downloading.
FLASHING A FLASHY PHONE
I've downloaded and tried to flash the ROM MT6580__MFT__I7__I7__6.0__alps-mp-m0.mp1-V2.39_magc6580.we.c.m_P21, which seems to be the same that was in the phone, but the phone didn't turn on anymore after this (I believe it bricked). I didn't take backup before doing this, please don't blame me, It's been many years since I've done this kind of thing on a Chinese phone.
Any other rom that I tried just throws a DRAM error in SP Flash Tools, I'm also not able to format the phone (it also throws an error).
The error:
ERROR : S_FT_ENABLE_DRAM_FAIL (4032)
WHAT I AM LOOKING FOR:1 - I need to find the right ROM firmware for this phone, please somebody give me a download link. A custom rom would be good too.
2 - I need to know which exactly is this phone's brand and model (because I need to know its hardware specs).
Please help me find at least the firmware.
Anyone?
Maybe it's the
Leioa Vapio Summilux (Mate 33 Pro) - Black Smart Phone 2021
but I don't know
xXx yYy said:
Maybe it's the
Leioa Vapio Summilux (Mate 33 Pro) - Black Smart Phone 2021
but I don't know
Click to expand...
Click to collapse
got the firmware with scatter file?
Just as it says on the sticker, this phone is a Leioa Vapio summlux h1. It looks like some kind of Chinese clone or something.
Cool, but how can I find its firmware? The phone here is bricked.
jackbauer said:
Cool, but how can I find its firmware? The phone here is bricked.
Click to expand...
Click to collapse
I don't know and that's the problem with exotic phones. Good luck with that.
This kind of copied / rebranded phones can also be found outside of China. So, whenever you buy a smartphone be sure to reach an authorized seller or take a closer look at the phone’s aspects.
My recommendation: Ask phone's seller for help.
"This phone was handed to me, so I have no reference at all."
There's nothing I can do about talking to a seller. I'm here just asking for a rom that might work with this mediatek, it doesn't mean that it needs to be the Stock ROM.
Can anyone tell me a workaround for this? it doesn't need to be the stock rom.
these fake phones are low end trash devices running android 6 no LTE. you bricked working ROM for no reason so what?
https://www.gem-flash.com/vb/threads/837178
https://androidfilehost.com/?fid=673791459329059944
https://androidhost.ru/Xe8
aIecxs said:
these fake phones are low end trash devices running android 6 no LTE. you bricked working ROM for no reason so what?
https://www.gem-flash.com/vb/threads/837178
https://androidfilehost.com/?fid=673791459329059944
https://androidhost.ru/Xe8
Click to expand...
Click to collapse
You really want to know why I'm still insisting in this phone? It's a pride thing. Some douche needs to see this working. That's why. After I "fix" this, I'll take some photos of it, send them to the person and then I'll just get rid of it.
What's the password for MT6580__Q_MOBILE__V15_PRO__V15_PRO__6.0__ALPS-MP-M0.MP1-V2.39_MAGC6580.WE.C.M_P30.RAR? I'm not finding it in the list.
https://drive.google.com/uc?id=1kjQZT6d8Yz2UBEERQnE68ZEm5h7uSLg7&export=download
You should try downloading this.
jackbauer said:
SW Ver.
alps-mp-m0.mp1-V2.39 _magc6580.we.c.m_P32
Click to expand...
Click to collapse
This is what I found from the sw ver.
notnoelchannel said:
https://drive.google.com/uc?id=1kjQZT6d8Yz2UBEERQnE68ZEm5h7uSLg7&export=download
You should try downloading this.
This is what I found from the sw ver.
Click to expand...
Click to collapse
This one is password protected.
sorry, seems one must pay $2 for password. however, I doubt any of this ROMs will work...
https://mafirmware.blogspot.com/2019/12/mt6580qmobilev15prov15pro60alps-mp.html
maybe this one will work?
Pineapple 6.0 alps-mp-m0.mp1-V2.39 Stock Firmware ROM (Flash File)
Download the official Pineapple 6.0 alps-mp-m0.mp1-V2.39 Stock Firmware ROM (Flash File) for your Unknown Mobile. We also provide all other Unknown Stock Firmware for free.
firmwarefile.com
notnoelchannel said:
maybe this one will work?
Pineapple 6.0 alps-mp-m0.mp1-V2.39 Stock Firmware ROM (Flash File)
Download the official Pineapple 6.0 alps-mp-m0.mp1-V2.39 Stock Firmware ROM (Flash File) for your Unknown Mobile. We also provide all other Unknown Stock Firmware for free.
firmwarefile.com
Click to expand...
Click to collapse
Download quota exceeded.
Please upload that file somewhere else. Google Drive is as*.
jackbauer said:
Download quota exceeded.
Please upload that file somewhere else. Google Drive is as*.
Click to expand...
Click to collapse
I'll mirror it to you (edit: i can't)
Here's another. they aren't password protected:
MT6580_____6.0__alps-mp-m0.mp1-V2.39_nb6580.we.m.7z | by GSM iNFO for Galaxy S6 Edge+
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
MT6580__X30__X30__X30__6.0__alps-mp-m0.mp1-V2.34_droi6580.weg.m_P29 Without Password - GSM-Forum
Download: Oppo Clone R11 Stock ROM Flash File. Oppo Clone R11 Flash File Without Password MT6580__X30__X30__X30__6.0__alps-mp-m0.mp1-V2.34_droi6580.weg
forum.gsmhosting.com