Database Info

Bootloop, only fastboot and EDL mode no system boot please help Axon 10 Pro

hi Guys
I'm in the forum for a very long time as an assistant helper now it has got me hard I have an Axon 10 Pro with curly boot loader and trying to flash a TWRP I have somehow the device or SotA and SlotB have shrunk. The Axon Bootet permanently in 0.5 second cycle and also a FULL Restot or FULL Flash with EDL Tool has not changed anything. Likewise, a new flash about fastboot with the command (fastboot flash boot_a boot.img) the same for boot_b then try with fastboot command (fastboot boot twrp.img) Recovery to start without success fastboot erase boot_a and boot_b has also flashing new but it does not start. Always bootloop:crying::crying::crying::crying:

the Axon 10 pro is back because he had no backup of all we had from my Axon 10 pro made a backup with the edl tool (Backup all) and have then copied his efs backup purely and then this with then on the Axon 10 flashed the Axon 10 pro is now back

Where did you get the twrp from?

From udev
On his donload page
https://forum.xda-developers.com/showpost.php?p=80156866&postcount=3

I had a bootloop issue as well and even though I reflashed using the EDL tool, it doesn't erase and the errors remained, but when I entered EDL mode and reflashed using the Xiaomi Flash Tool, storage was completely erased and the device was flashed cleanly and booted correctly.

I've encountered a similar issue with my Axon (2020U version). I can boot into EDL but nothing else (no fastboot, recovery, etc.). I previously had TWRP up and running successfully, not sure what happened.
Is there a full EDL zip or similar that I can flash to return everything to stock? I tried restoring with the EDL tool but with no success

jbeaulieu said:
I've encountered a similar issue with my Axon (2020U version). I can boot into EDL but nothing else (no fastboot, recovery, etc.). I previously had TWRP up and running successfully, not sure what happened.
Is there a full EDL zip or similar that I can flash to return everything to stock? I tried restoring with the EDL tool but with no success
Click to expand...
Click to collapse
The reason the EDL tool may not work is that is doesn't have the capability to erase. The boot loop that occurs is usually due a corrupt bootfile. Use the MiFlash fastboot recovery tool. Make sure to select the clean all button at the bottom. Place your phone in EDL mode. Hit refresh to make sure your phone is detected. Select the EDL file and then hit flash.

jim262 said:
The reason the EDL tool may not work is that is doesn't have the capability to erase. The boot loop that occurs is usually due a corrupt bootfile. Use the MiFlash fastboot recovery tool. Make sure to select the clean all button at the bottom. Place your phone in EDL mode. Hit refresh to make sure your phone is detected. Select the EDL file and then hit flash.
Click to expand...
Click to collapse
Apologies for my ignorance - what exactly am I flashing? I see the "clean all" radio button, but I'm not sure what EDL package to flash after selecting that option - is there a 2020U package floating around that I'm not seeing?

jbeaulieu said:
Apologies for my ignorance - what exactly am I flashing? I see the "clean all" radio button, but I'm not sure what EDL package to flash after selecting that option - is there a 2020U package floating around that I'm not seeing?
Click to expand...
Click to collapse
The EDL package, use the same EDL package that you used with the EDL tool. Just select the "clean all" radio button. Select the path to the EDL , hit refresh once phone, in EDL mode, is detected, hit flash.

jim262 said:
The EDL package, use the same EDL package that you used with the EDL tool. Just select the "clean all" radio button. Select the path to the EDL , hit refresh once phone, in EDL mode, is detected, hit flash.
Click to expand...
Click to collapse
Okay, I'm trying to use MiFlash to restore the backup I took through the original EDL tool. The MiFLash tool is only timing out with a "cannot receive hello packet" - was this something you encountered as well?

jbeaulieu said:
Okay, I'm trying to use MiFlash to restore the backup I took through the original EDL tool. The MiFLash tool is only timing out with a "cannot receive hello packet" - was this something you encountered as well?
Click to expand...
Click to collapse
I did attempt to flash the wrong EDL file (They are region and device specific) and received that error. I have the Chinese version and once I downloaded the correct EDL file, I had no issues I have even maintained an unlocked boot loader, flashed Magisk and taken OTAs.

jim262 said:
I did attempt to flash the wrong EDL file (They are region and device specific) and received that error. I have the Chinese version and once I downloaded the correct EDL file, I had no issues I have even maintained an unlocked boot loader, flashed Magisk and taken OTAs.
Click to expand...
Click to collapse
Ah, okay. I have the US version - A2020U. Unless I'm mistaken, it looks like there isn't a full EDL zip file available for my version yet, so I might be stuck

There were EDL files up, but apparently they were taken down for some reason.

in the russians there are the 1.6 of the g model as edl (which one can use in a brick) but I do not know if this is synonymous with the u model as you would have to ask @Unjustified Dev or something
@MOD
I hope that the links are allowed here else delete please
1.6 g model edl
http://4pda.ru/forum/index.php?showtopic=965431&st=0#entry88768840
And the lonk too the forum
http://4pda.ru/forum/index.php?showtopic=965431

Chris axon 7 said:
in the russians there are the 1.6 of the g model as edl (which one can use in a brick) but I do not know if this is synonymous with the u model as you would have to ask @Unjustified Dev or something
@MOD
I hope that the links are allowed here else delete please
1.6 g model edl
http://4pda.ru/forum/index.php?showtopic=965431&st=0#entry88768840
And the lonk too the forum
http://4pda.ru/forum/index.php?showtopic=965431
Click to expand...
Click to collapse
Thanks for sharing these. @Unjustified Dev do you happen to know if the 1.6 2020G EDL would be able to be flashed to a 2020U model to recover from a brick? Or if not, is there a place to obtain the proper files, either here on the forums or via PM?

jim262 said:
I did attempt to flash the wrong EDL file (They are region and device specific) and received that error. I have the Chinese version and once I downloaded the correct EDL file, I had no issues I have even maintained an unlocked boot loader, flashed Magisk and taken OTAs.
Click to expand...
Click to collapse
Please share us the EDL file for the Chinese version.

has anyone found the US EDL file yet?

Futility's Forgotten Soldier said:
has anyone found the US EDL file yet?
Click to expand...
Click to collapse
Still waiting. I'm stuck on the EU version.

Sprint GM1925 Stock ROM

I've tried to restore to Stock using a few of the different ROM's from the Android File Host site, but I'm constantly stuck in a revolving Fastboot mode.
The Sprint bootloader unlock here worked fine:
https://forum.xda-developers.com/on...otloader-unlock-sprint-oneplus-7-pro-t4042145
At one point I had the TWRP zip installed and working fine, so I'm not sure why I can't reboot to recovery anymore. It always boots to fastboot.
I've also tried ADB commands to run from a different slot (A/B/Other). Both slots produce this error when trying to flash the twrp.img to either slot:
FAILED (remote: Failed to load/authenticate boot image: Load Error)
Any ideas are appreciated. I thought all the Stock ROMs provided work for all variants. My phone connects successfully with TOOL_ALL_IN_ONE, and flashing a Stock image seems successful, but the phone reverts back to Fastboot loop.
Edit: I tried the Guac for All unbrick tool and method specified here:
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
I made sure to install the L2 drivers certificate and use the original cable that came with my phone in a USB 2.0 port. However, on the last MSM Tool's Status of Communication called Param Preload, I get an error that says Device does not match image. I'm guessing the Guac for All tool has a unified ROM, but it doesn't seem to work for my SM1925 (Sprint). I'll keep trying other methods and updating.

aktiv8d said:
I've tried to restore to Stock using a few of the different ROM's from the Android File Host site, but I'm constantly stuck in a revolving Fastboot mode.
The Sprint bootloader unlock here worked fine:
https://forum.xda-developers.com/on...otloader-unlock-sprint-oneplus-7-pro-t4042145
At one point I had the TWRP zip installed and working fine, so I'm not sure why I can't reboot to recovery anymore. It always boots to fastboot.
I've also tried ADB commands to run from a different slot (A/B/Other). Both slots produce this error when trying to flash the twrp.img to either slot:
FAILED (remote: Failed to load/authenticate boot image: Load Error)
Any ideas are appreciated. I thought all the Stock ROMs provided work for all variants. My phone connects successfully with TOOL_ALL_IN_ONE, and flashing a Stock image seems successful, but the phone reverts back to Fastboot loop.
Edit: I tried the Guac for All unbrick tool and method specified here:
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
I made sure to install the L2 drivers certificate and use the original cable that came with my phone in a USB 2.0 port. However, on the last MSM Tool's Status of Communication called Param Preload, I get an error that says Device does not match image. I'm guessing the Guac for All tool has a unified ROM, but it doesn't seem to work for my SM1925 (Sprint). I'll keep trying other methods and updating.
Click to expand...
Click to collapse
https://androidfilehost.com/?fid=4349826312261604268
Flash this, install the 9.5.17 ota and try to re-unlock

Whoareyou said:
https://androidfilehost.com/?fid=4349826312261604268
Flash this, install the 9.5.17 ota and try to re-unlock
Click to expand...
Click to collapse
Thank you so much for your help. I followed your instructions exactly.
After the MSM Tool's flash with the image provided, it no longer fastboot cycled and booted normally to 9.5.12. It paused on the 5G logo for a couple mins and then loaded into the phone setup screen. I think updated to 9.15.17 ota as instructed. Everything is now working properly.
Can I ask where you found this version of the MSM tool's stock image that works for the GM1925? I searched and searched, but couldn't find anything. Even searching for that zip's filename returned 0 results for me. I saved that file, but if new compatible stock ROM's are released, I'd like to be able to find them, too.

aktiv8d said:
Thank you so much for your help. I followed your instructions exactly.
After the MSM Tool's flash with the image provided, it no longer fastboot cycled and booted normally to 9.5.12. It paused on the 5G logo for a couple mins and then loaded into the phone setup screen. I think updated to 9.15.17 ota as instructed. Everything is now working properly.
Can I ask where you found this version of the MSM tool's stock image that works for the GM1925? I searched and searched, but couldn't find anything. Even searching for that zip's filename returned 0 results for me. I saved that file, but if new compatible stock ROM's are released, I'd like to be able to find them, too.
Click to expand...
Click to collapse
They're only sent out by OnePlus when someone needs to restore their phone due to malfunction, not released on any regular basis, but this one has been around for a while.

Hi, I am in the exact same position as you were. I downloaded the .rar file provided, but how do I flash it?
Thanks!
---------- Post added at 03:51 AM ---------- Previous post was at 03:37 AM ----------
mimat1 said:
Hi, I am in the exact same position as you were. I downloaded the .rar file provided, but how do I flash it?
Thanks!
Click to expand...
Click to collapse
UPDATE: I flashed it by starting the MSMDownloader while in EDL mode. Much thanks for this method and fix. My phone thanks you for revival!

Narwhal73 said:
Ok so for future people who run into the same problem and are clueless like me! The RAR file contains the system image and an MSM Tool. Unrar it, open the tool, put your phone in EDL mode, make sure the tool recognizes the device, then click "start".
Cheers!
Click to expand...
Click to collapse
Alright, sorry for hijacking this thread... It seems like after flashing this image, the phone has been SIM locked to Sprint?! I purchased this phone unlocked, and it was working with Public Mobile prior to trying to unlock the bootloader. @Whoareyou any advice?
---------- Post added at 07:36 PM ---------- Previous post was at 07:22 PM ----------
Narwhal73 said:
Alright, sorry for hijacking this thread... It seems like after flashing this image, the phone has been SIM locked to Sprint?! I purchased this phone unlocked, and it was working with Public Mobile prior to trying to unlock the bootloader. @Whoareyou any advice?
Click to expand...
Click to collapse
Ok, I was really spooked by the Android 9 ROM saying my device was SIM locked when I bought it unlocked.
On point with answering my own questions: applying the OTA update now shows that my phone is unlocked (as it should be!) under Settings > System updates > UICC unlock.

My phone always reboots to fastboot. I've opened MSM tool and my phone doesn't appear there. It does appear using fastboot devices command on CMD though. How can I flash this? Restart recovery or restart bootloader does nothing, always back to fastboot.

F2 Pro completely stuck

Hi,
My phone is actually dying and I don't know how to recover it this time.
I had a perfectly working setup with latest weekly update of Xiaomi eu MIUI , TWRP and magisk, and know even fastboot is not responding.
I usually don't like when people say that, but I think a malware did it, as my apps started not responding in a few minutes, and the reboot finished the job.
Now it won't boot anymore, when it's plug the notification led is red, and fastboot is detected but commands are stuck.
Also, TWRP is neither accessible from "power + vol up" since last miui eu update, nor from fastboot since the "accident"
If someone have any advice on how to unlock fastboot, flash back the rom or any other way to recover my phone, please help
Also, if you want to know the rest of the story, it's here...
I was using my phone as usual, trying to setup a bridge openvpn connection. (like everyone :laugh: )
The issue is that the only app claiming to do that isn't free, and I want to be sure I can make it work before spending any money.
So I tried to patch it and different apks (I know it's bad...), and while transferring an apk from my laptop to my phone, I noticed the transfer was kinda slow for a few seconds (nothing worrying, but unusual)
Then some of my apps didn't want to launch and, back to the app drawer, most of my apps had their package names, with no icons...
It was at this moment Jackson I knew I screwed up...
I then tried rebooting, and the phone stayed a few minutes on the MIUI screen, then shut off.
After a reboot, I noticed the red led, the absence of boot animation, and the bootloop.
Obviously, if I had a fastboot access, it would be easy to boot on TWRP and then flash back my rom properly but I can't...
EDIT: to make this clearer (I know the post above is a little bit messy), I have the following issues:
- No access to TWRP (for flashing)
- Fastboot is accessible but broken enough so flash/boot to twrp is not possible
- I just though of EDL mode, but "fastboot oem edl" doesn't seems to work
- I prefer to avoid opening my phone (to access to the EDL test points)
EDIT2: You can't flash anything in EDL mode without specific autorisations from xiaomi, so this mode becomes way more useless than on my previous Mi A1. I managed to miraculously flash some things by using miflash in fastboot mode. Maybe working on a windows os instead of gnu/linux helped somehow...

Thelm76 said:
Hi,
My phone is actually dying and I don't know how to recover it this time.
I had a perfectly working setup with latest weekly update of Xiaomi eu MIUI , TWRP and magisk, and know even fastboot is not responding.
I usually don't like when people say that, but I think a malware did it, as my apps started not responding in a few minutes, and the reboot finished the job.
Now it won't boot anymore, when it's plug the notification led is red, and fastboot is detected but commands are stuck.
Also, TWRP is neither accessible from "power + vol up" since last miui eu update, nor from fastboot since the "accident"
If someone have any advice on how to unlock fastboot, flash back the rom or any other way to recover my phone, please help
Also, if you want to know the rest of the story, it's here...
I was using my phone as usual, trying to setup a bridge openvpn connection. (like everyone :laugh: )
The issue is that the only app claiming to do that isn't free, and I want to be sure I can make it work before spending any money.
So I tried to patch it and different apks (I know it's bad...), and while transferring an apk from my laptop to my phone, I noticed the transfer was kinda slow for a few seconds (nothing worrying, but unusual)
Then some of my apps didn't want to launch and, back to the app drawer, most of my apps had their package names, with no icons...
It was at this moment Jackson I knew I screwed up...
I then tried rebooting, and the phone stayed a few minutes on the MIUI screen, then shut off.
After a reboot, I noticed the red led, the absence of boot animation, and the bootloop.
Obviously, if I had a fastboot access, it would be easy to boot on TWRP and then flash back my rom properly but I can't...
Click to expand...
Click to collapse
Hi
I had a similar situation
I comfigured an app and during configuration the phone start framing
I rebooted and stucked at miui screen
I tried to reboot in recovery ,nothing
I downloaded latest miui for europe 12.0.3 and mi flash
For me fastboot worked to flash latest firmware from xiaomi
And now is working and my bootloader is locked

Thelm76 said:
Hi,
My phone is actually dying and I don't know how to recover it this time.
[/hide]
Click to expand...
Click to collapse
Xiaomi.eu has TWRP issue...
Go to https://www.androidfilehost.com/?w=files&flid=50678 and find your recovery (lmi) and flash it with fastboot and boot to recovery.
fastboot flash recovery twrp.img
fastboot boot twrp.img
Now download the new ROM 20.10.16, push it to the internet storage and install it dirty... Wipe Cache and reboot....

My problem is almost same, i unlock the bootloader to flash xiaomi.eu rom from global rom, unlocking and flashing custom recovery was done smoothly, when i tried to flash xiaomi.eu rom version 12.0.8 it booted back to recovery, and i format the data partition and booted to system, and same result. I tried global its same result.
Then i tried miflash tool, " antirollback error ".
Now i don't know what to do. Hope my precious poco f2 pro is not bricked, coz i can still manage to boot in custom recovery, and can use miflash tool but error.
Can someone out there help me please. Thanks in advance.

Eldybug said:
My problem is almost same, i unlock the bootloader to flash xiaomi.eu rom from global rom, unlocking and flashing custom recovery was done smoothly, when i tried to flash xiaomi.eu rom version 12.0.8 it booted back to recovery, and i format the data partition and booted to system, and same result. I tried global its same result.
Then i tried miflash tool, " antirollback error ".
Now i don't know what to do. Hope my precious poco f2 pro is not bricked, coz i can still manage to boot in custom recovery, and can use miflash tool but error.
Can someone out there help me please. Thanks in advance.
Click to expand...
Click to collapse
Since you have access to a properly working fastboot and recovery, I believe there is always a way to recover your phone.
I'll be glad to help you but for now, I'm more focused on my issue.
Only thing, while using miflash, be careful to never lock your bootloader since you would have to open your phone to access EDL mode in case of bootloop
(but you can lock it afterwards if you want)

Enricosteph said:
Xiaomi.eu has TWRP issue...
Go to https://www.androidfilehost.com/?w=files&flid=50678 and find your recovery (lmi) and flash it with fastboot and boot to recovery.
fastboot flash recovery twrp.img
fastboot boot twrp.img
Now download the new ROM 20.10.16, push it to the internet storage and install it dirty... Wipe Cache and reboot....
Click to expand...
Click to collapse
Well, the main issue here is that fastboot seems to be broken too...

i found this for you on the LOS rom for poco f2 pro (am not the autor) this is for the "Anti-rollback error" (i hope that can help you):
romabah said:
Gentlemen with EU versions of Poco F2 pro, could you help me out?
Right now i am running 12.0.2.0 QJKEUXM.
To flash Lineage i first need to flash MIUI V12.0.3.0.QJKMIXM via MiFlash. I tried to do that but got an Anti-rollback error.
Checking via fastboot i saw that my phones anti rollback value is 1, but MIUI V12.0.3.0.QJKMIXM firmware has an anti rollback of 0.
Some folks say to delete first 5-6 lines in text editor from .bat file, but at the same time people tell everywhere to NOT flash firmware with lower value that your current anti rollback.
Any advice? How did other EU folks fix this?
Edit: I fixed it! I will NOT and cannot claim that this will fix all rollback error's, but it fixed mine.
0) This is applicable to fastboot version of MIUI V12.0.3.0.QJKMIXM (aka tgz file that you need to extract twice)
1) Move the extracted firmware directory imi_global_images_V12.0.3.......ets.ets. ( map with flash_all.bat, images ) to C: directory and rename to something short, like xiaomiFirm.
This will solve a lot of weird error's as MiFlash doesnt like long directories
2) Within the moved map open flash_all.bat with text editor and delete everything starting and including "::check anti_version" to and including "echo %..."
This removes the anti rollback check somehow. The reason for only editing flash_all.bat is because this is the .bat file that is run when you choose clean all option in MiFlash, i assume you dont want to clean all and lock now do you?
3) After finishing flashing mine gave error Not catch checkpoint flash is not done, but booted normally. Gave me a heart attack.
Sanity check: When running cmd "fastboot getvar anti" it returned "anti: 1"
Meaning i just flashed a ROM with anti of 0 on a phone with a anti value of 1. At least i believe so.
In any case, thank all for giving feedback for other ways of fixing this.
Click to expand...
Click to collapse

I'll try to make a type C deep flash cable to flash fastboot, and edit this message to explain if this works

Thelm76 said:
Well, the main issue here is that fastboot seems to be broken too...
Click to expand...
Click to collapse
Try to hold down only Vol Down and connect it to your computer

Enricosteph said:
Try to hold down only Vol Down and connect it to your computer
Click to expand...
Click to collapse
I don't know if this was my cable or fastboot oem edl, but windows recognised the phone as qualcomm qdloader 9008. I'll now try to update fastboot, install twrp and check the extent of the damages.

Fangstergangsta said:
i found this for you on the LOS rom for poco f2 pro (am not the autor) this is for the "Anti-rollback error" (i hope that can help you):
Click to expand...
Click to collapse
Indeed, OP, try to flash everything from the start thep by step.

You must stop therapeutic relentlessness!!!
Just plug out the charger and let him die softly...
Put him back in his sweet box after his last breathe
Bury him in your garden with a decent burial : he deserve it!!!!
It's HIS TIME, dude....
Regards

Mastakony said:
You must stop therapeutic relentlessness!!!
Just plug out the charger and let him die softly...
Put him back in his sweet box after his last breathe
Bury him in your garden with a decent burial : he deserve it!!!!
It's HIS TIME, dude....
Regards
Click to expand...
Click to collapse
Haha it's not therapeutic relentlessness when you're sure it will live again in a few days (and fully working!)
It just need a good memory wipe and android replacement
As I managed to get to emergency mode, I can now easily replace its software
EDIT: I didn't know that for these xiaomi devices, you need very specific autorisations to flash something with EDL... Fortunately, after messing around with miflash, I managed to unlock myself out of this infinite loop

As I managed to get to emergency mode, I can now easily replace its software
Click to expand...
Click to collapse
How are you going to flash the software?

Well,
By using edl mode and miflash, I got some errors as I was not authorised to do this operation, so I rebooted to fastboot, reused miflash, and I don't know which kind of magic did that but after some files flashed and an error, I was able to boot on TWRP. With this done, I tried to keep my data but didn't worked, and as I have everything constantly backup, I dicided to do a flashall.
now, I think I have a good MIUI base to flash MIUI EU back

Thelm76 said:
Well,
By using edl mode and miflash, I got some errors as I was not authorised to do this operation, so I rebooted to fastboot, reused miflash, and I don't know which kind of magic did that but after some files flashed and an error, I was able to boot on TWRP. With this done, I tried to keep my data but didn't worked, and as I have everything constantly backup, I dicided to do a flashall.
now, I think I have a good MIUI base to flash MIUI EU back
Click to expand...
Click to collapse
I have the same situation plus no fastboot or recovery at all.. Please tell me how did you resolve it?

ghannaiem said:
I have the same situation plus no fastboot or recovery at all.. Please tell me how did you resolve it?
Click to expand...
Click to collapse
Is the phone detected by the pc in usb?
And when you press power+ sound + or - What is happening?

NOSS8 said:
Is the phone detected by the pc in usb?
And when you press power+ sound + or - What is happening?
Click to expand...
Click to collapse
Yes , detected by usb but as qcom 9008,
And when holding down power button with + or - vol it restarts again to 9008 .
So it is not detected by any means, but only detected in edl mode

ghannaiem said:
Yes , detected by usb but as qcom 9008,
And when holding down power button with + or - vol it restarts again to 9008 .
So it is not detected by any means, but only detected in edl mode
Click to expand...
Click to collapse
how did it happen?

My imei got lost so I tried to flash eng rom through MI flash to fix it. It flashes all except certain file called (aop. Mbn) so I tried to flash it by cmd commands via fastboot and then the phone bricked.. No booting to fastboot anymore , no recovery. even with disconnecting battery and reconnecting again... Phone only recognized in Edl mode and when flashing through MI flash it asks for edl authorization... Account login successful but then flash fail cuz account is not authorized. So I think The only solution will be authorized account or patched prog_ufs file

I tried rooting RMX2040

Disclaimers:
> I am NOT encouraging anyone to do this. I'm not responsible for anything that happens to your device once you've rooted it already. I did this out of curiosity and I'm just sharing my experience.
> Also yeah, Rmx2040. Not Rmx2040EU.
> It's doable, but it is NOT stable. It boots but you can't use the phone normally. You know, like how you'd normally use a phone.
> I SOFTBRICKED MY PHONE.
Bugs:
UI Restarts every time you go landscape and go back to portrait
Can't open camera
UI Restarts every time you scroll on playstore or anywhere with lots of images
Phone lags, actually no, it restarts all the damn time
NOTES:
@Kraitos was looking for boot.img files so i decided to do a little digging too. I saw in a post somewhere that you need vbmeta.img and a patched (via magisk) boot.img from the device itself.
The "vbmeta.img" I used here was from a Realme 5. I figured all they 'kinda' looked the same plus I don't know if the file is also patched. I tried patching it in magisk but it didn't work, so I just grabbed a (patched?) vbmeta.img (from Realme 5 somewhere in the internet) and used that for our device which is, Rmx2040 (6i)
I grabbed the boot.img from the official ozip file in realme's site (From version A.27, I couldn't find any boot.img for A.31 because they haven't updated the link in the site yet). I opened it up, looked for it, grabbed it and patched it using magisk. Thankfully, it worked.
I used both the vbmeta.img (again, idk if it's patched) and the patched boot.img to root my device. I doubted it too, I thought it'll give me a bootloop or something, but it didn't.
If you want to do it, here are the steps:
Unlock your bootloader. Go here:
https://forum.xda-developers.com/realme-6i/how-to/unlocking-bootloader-realme-6i-rmx-2040-t4174255
Credits to @Kraitos for this awesome guide on how to unlock Rmx2040's bootloader.
If you're done unlocking your bootloader, download these files:
boot.img:
https://drive.google.com/file/d/1D7S9JGwDusyL6hJ6pWrFRBLo_9DdQLGR/view?usp=sharing
vbmeta.img:
https://drive.google.com/file/d/1Do2SfGI_Tp2jERcO77Vh1vEfjiQ6Xxe9/view?usp=sharing
Portable adb fastboot (if you don't have it yet):
https://drive.google.com/file/d/1m78UIsabMQlCvNIIv2e4xI19pN9b1otw/view?usp=sharing
Put all in one folder, it doesn't have to have a name.
Extract the zip file (minimal_adb_fastboot_1.4.3_portable.zip)
*Your folders should have the ff:
adb.exe
AdbWinApi.dll
AdbWinUsbApi.dll
boot.img
cmd-here.exe
Disclaimer.txt
fastboot.exe
vbmeta.img
Enable USB debugging in your phone.
Connect your phone to your pc.
Double click "cmd-here.exe"
Type the following in CMD:
adb reboot bootloader
If it displays a text in the middle, type "fastboot devices" on cmd. You SHOULD your phone's code there. If it doesn't display anything, replug the type C cable on your phone and type it again, do this until it shows.
Copy this and paste it in CMD:
fastboot flash vbmeta vbmeta.img --disable-verity --disable-verification
Then press enter.
once it's done, copy this next:
fastboot flash boot boot.img
Then press enter.
Reboot your device by typing this in CMD:
fastboot reboot
If you've made it this far, you should install the latest Magisk Manager after you've unlocked the bootloader though. Or do it last, whatever you prefer works.
Viola, now you have an unstable phone.
I'm gonna try locking my bootloader later to flash the A.27 ozip later, I hope going back to "stock and unrooted" fixes the bugs I've experienced :|
I don't really know anything besides trying stuff out, I just wanted to see if it'll work properly with root. If anyone here noticed that I've done something wrong, please do tell me. I wanna try all the methods we can think of just so we can root this device.
Have a wonderful day y'all
Edit:
Everything went bad. I locked the bootloader because I needed access to stock recovery. It gave me a "red state"
I don't know how to fix this problem :|

Awesome guide and thanks for mention you know some people do that if you pay them to unlock bootloader and rooting device so this thread will be a savior to alot of people , I'll do testing in a couple of days asap i get a laptop relocking bootloader is mostly the same when you unlocked bootloader so it should be easy to flash stock again

Alright, so, quick update:
I tried to lock the bootloader while it had root (in my case, magisk). When I did, the phone went to "red state" (For those who don't know, it's basically bootloop wherein the phone never goes to recovery no matter what you do. Not even in stock).
Now, my phone is broken. It bootloops. I don't know what to do with this problem except going to a service center and have this fixed. Does anyone know how much it costs for reflashing stock rom to realme devices?
Sidenote: I tried the volume + down/up method to get into fastboot mode or stock recovery, but it never works. And honestly speaking, I don't think it will. To get into fastboot mode the bootloader needs to be unlocked, so that's crossed out AND I can't get into stock recovery because the phone restarts every 5 seconds because of that pesky "red state" thingy at the start.

Joesh.lucas said:
Alright, so, quick update:
I tried to lock the bootloader while it had root (in my case, magisk). When I did, the phone went to "red state" (For those who don't know, it's basically bootloop wherein the phone never goes to recovery no matter what you do. Not even in stock).
Now, my phone is broken. It bootloops. I don't know what to do with this problem except going to a service center and have this fixed. Does anyone know how much it costs for reflashing stock rom to realme devices?
Sidenote: I tried the volume + down/up method to get into fastboot mode or stock recovery, but it never works. And honestly speaking, I don't think it will. To get into fastboot mode the bootloader needs to be unlocked, so that's crossed out AND I can't get into stock recovery because the phone restarts every 5 seconds because of that pesky "red state" thingy at the start.
Click to expand...
Click to collapse
The problems you faced after rooting the phone is because you flashed an older version of boot.img thats why it wasn't working with latest rom and caused instability in system... And the second problem that you faced that red state thing..!! it was your fault you shouldn't relocked the bootloader with a patched boot img.. and if you wanted to boot the stock recovery you should have used the command " fastboot reboot recovery " this command in fastboot mode reboots the phone to recovery mode... Well i want to know what happend did your phone survived??

mehdi.shah said:
The problems you faced after rooting the phone is because you flashed an older version of boot.img thats why it wasn't working with latest rom and caused instability in system... And the second problem that you faced that red state thing..!! it was your fault you shouldn't relocked the bootloader with a patched boot img.. and if you wanted to boot the stock recovery you should have used the command " fastboot reboot recovery " this command in fastboot mode reboots the phone to recovery mode... Well i want to know what happend did your phone survived??
Click to expand...
Click to collapse
Thanks for the information, I now understand that I should use the same boot.img. It was worth the experiment tho, I just hoped I did it better so I wouldn't have to go through this process again.
My phone is here with me. It's still stuck on red state and I haven't went to a service center to have it fixed yet. I went to Hovatek to look for some ways to fix this problem. I tried using miracle box and the SP flashtool method but the latter had problems with the scatter file and the former didn't get past this:
Waiting for USB Port...
Set OPPO PreLoader USB VCOM (Android) (COM4)
>>Please Hold "ON" to connect with the phone...
I also looked a little bit more into it and I found out that I can use the OFP file and the flasher application here: https://firmwarex.net/realme-6i-rmx2040-official-firmware/
But unfortunately, I can't use the application because it's asking for an OPPO ID or something. Either I bring this phone to a service center or I'll just let it be this way until I decide to sell it somewhere. I hope I'll be able to fix this on my own tho, at least, someday.
Edit:
You can read more of my experience here:
Rmx2040 (realme 6i) scatter file
Hi guys, I'm trying to get the scatter file in this and so far I found this on the ozip file: preloader 0x0 pgpt 0x0 recovery_a 0x8000 misc 0x2008000 para 0x2088000 opporeserve1 0x2108000 opporeserve2
forum.hovatek.com
I'm subma rine13.

Joesh.lucas said:
Thanks for the information, I now understand that I should use the same boot.img. It was worth the experiment tho, I just hoped I did it better so I wouldn't have to go through this process again.
My phone is here with me. It's still stuck on red state and I haven't went to a service center to have it fixed yet. I went to Hovatek to look for some ways to fix this problem. I tried using miracle box and the SP flashtool method but the latter had problems with the scatter file and the former didn't get past this:
Waiting for USB Port...
Set OPPO PreLoader USB VCOM (Android) (COM4)
>>Please Hold "ON" to connect with the phone...
I also looked a little bit more into it and I found out that I can use the OFP file and the flasher application here: https://firmwarex.net/realme-6i-rmx2040-official-firmware/
But unfortunately, I can't use the application because it's asking for an OPPO ID or something. Either I bring this phone to a service center or I'll just let it be this way until I decide to sell it somewhere. I hope I'll be able to fix this on my own tho, at least, someday.
Edit:
You can read more of my experience here:
Rmx2040 (realme 6i) scatter file
Hi guys, I'm trying to get the scatter file in this and so far I found this on the ozip file: preloader 0x0 pgpt 0x0 recovery_a 0x8000 misc 0x2008000 para 0x2088000 opporeserve1 0x2108000 opporeserve2
forum.hovatek.com
I'm subma rine13.
Click to expand...
Click to collapse
Hey buddy i just rooted my realme 6i (RMX 2040) on build number A.37... everything went smooth and working flawlessly.... No system instabilities at all... Btw sorry to hear that your phone is still in brick state.. actually thing is oppo does not allow the users to flash stock rom on locked bl devices that why flasher tool asks for oppo authorized account in order to flash the device... And about SP flash tool.. it will not work either we have to wait for the patched rom that can be flashed on locked devices with sp flash tool

mehdi.shah said:
Hey buddy i just rooted my realme 6i (RMX 2040) on build number A.37... everything went smooth and working flawlessly.... No system instabilities at all... Btw sorry to hear that your phone is still in brick state.. actually thing is oppo does not allow the users to flash stock rom on locked bl devices that why flasher tool asks for oppo authorized account in order to flash the device... And about SP flash tool.. it will not work either we have to wait for the patched rom that can be flashed on locked devices with sp flash tool
Click to expand...
Click to collapse
Woah, is it true you've rooted it? How did you manage to pull it off? Is it similar to what I did except with different files?
Oh and yeah, I think I'll need to bring this to an authorized service center to have it fixed. In your currency, how much do you think it costs to flash the stock rom back to the phone? This has been a question that's been bothering me for months. I do hope it isn't pricey, because if it is then maybe I'll never have it fixed.

Joesh.lucas said:
Woah, is it true you've rooted it? How did you manage to pull it off? Is it similar to what I did except with different files?
Oh and yeah, I think I'll need to bring this to an authorized service center to have it fixed. In your currency, how much do you think it costs to flash the stock rom back to the phone? This has been a question that's been bothering me for months. I do hope it isn't pricey, because if it is then maybe I'll never have it fixed.
Click to expand...
Click to collapse
Yeah the procedure was the same as yours... I unlocked the bootloader i was on A27 build... And i downloaded the latest ozip file from the official site and i opened it up in file manager it asked if i want to update the software i clicked yes.. and it rebooted to stock recovery and started updating the device.. after successful update i opend up the ozip file by renaming it to .zip and extracted the boot.img and vbmeta.img. i patched the boot.img with latest magisk manager and tha than flashed those files in fastboot mode... With same commands that u used... And everything went well and its all good and rooted no problem at all..
And yeah the service center thing.. if its the software issue than the charge around 1.5 to 2k rupees in my country...which is around 9.34 to12.4 US dollars..

mehdi.shah said:
Yeah the procedure was the same as yours... I unlocked the bootloader i was on A27 build... And i downloaded the latest ozip file from the official site and i opened it up in file manager it asked if i want to update the software i clicked yes.. and it rebooted to stock recovery and started updating the device.. after successful update i opend up the ozip file by renaming it to .zip and extracted the boot.img and vbmeta.img. i patched the boot.img with latest magisk manager and tha than flashed those files in fastboot mode... With same commands that u used... And everything went well and its all good and rooted no problem at all..
And yeah the service center thing.. if its the software issue than the charge around 1.5 to 2k rupees in my country...which is around 9.34 to12.4 US dollars..
Click to expand...
Click to collapse
Does root work as it should?
Russian community guys reported that root exists in the system but not works at all. Rooting procedure looks the same.

sqzd0 said:
Does root work as it should?
Russian community guys reported that root exists in the system but not works at all. Rooting procedure looks the same.
Click to expand...
Click to collapse
Yeah it is working like it should work... I tried many things... Different magisk modules.. even changed boot animation with root file manager every thing works like charm..

mehdi.shah said:
Yeah it is working like it should work... I tried many things... Different magisk modules.. even changed boot animation with root file manager every thing works like charm..
Click to expand...
Click to collapse
I don't mean to be rude but, can you make a thread for that? Some rmx 2040 owners want to root their device and I think i just gave them a recipe for disaster.
Oh and by the way, thanks for answering my question. I have another one, will it be okay to update your device whilst rooted? If so then how do you stop the auto update?
(Sorry for the questions man hahahaha I wanted the same outcome but I failed miserably :| )

mehdi.shah said:
Yeah it is working like it should work... I tried many things... Different magisk modules.. even changed boot animation with root file manager every thing works like charm..
Click to expand...
Click to collapse
Bro give me boot.img a37

mehdi.shah said:
Yeah it is working like it should work... I tried many things... Different magisk modules.. even changed boot animation with root file manager every thing works like charm..
Click to expand...
Click to collapse

Give me boot.img of a37 version

mehdi.shah said:
Hey buddy i just rooted my realme 6i (RMX 2040) on build number A.37... everything went smooth and working flawlessly.... No system instabilities at all... Btw sorry to hear that your phone is still in brick state.. actually thing is oppo does not allow the users to flash stock rom on locked bl devices that why flasher tool asks for oppo authorized account in order to flash the device... And about SP flash tool.. it will not work either we have to wait for the patched rom that can be flashed on locked devices with sp flash tool
Click to expand...
Click to collapse

If you rooted dump the stock recovery and boot.img through terminal emulator I will try to port twrp

Boot.img and Vbmeta file can now be accessed by clicking the text above

Do is still need to relock my bootloader inorder to downgrade to A.27 update ? Thanks

mehdi.shah said:
Yeah it is working like it should work... I tried many things... Different magisk modules.. even changed boot animation with root file manager every thing works like charm..
Click to expand...
Click to collapse
Bro i tried the rooting process and i didnt check the boot and i rooted my phone the wifi,blueooth, camera, etc doesnt work anymore. If POSSIBLE can i revert it back to normal?

Can anyone provide me a twrp recovery file for realme 6i rmx2040 A.47 plsss

Just bricked

Okay so yesterday I decided to finally try to install TWRP to flash a custom rom on the system, but never thought it would give so much headache. My drivers were bad, the system locked and android 11 updating making the phone all sorts of bugs, I was anxious to get rid of it, and I did somehow. I was unable to flash TWRP into the recovery as the system partition type is different than usual for it seems, but the recovery partition was all weird, "no command" was stuck in the screen even after a hard reset through there. So I got Magisk and got Root and used Smart Flash to install TWRP through the running system and it landed successful. But when going to the recovery the TWRP screen was flickering, but I could send ADB commands yet and boot normally, I just couldn't access the recovery functions yet. So I flashed a different version of the TWRP with the IMG and the zip folder and nothing worked then I realized that maybe I should erase the partition before flashing it and then the murder. I found a tutorial on erasing stuff, but the whole process cost me more than twelve hours as I messed with so many things and was kinda learning the hows and dos.
But then I saw the command "fastboot erase system -w" that was a shortcut for all cleanup processes and I was wanting to wipe it again even to recover my google backup and be able to use my messenger apps. But it did erase, of course, the whole system and everything, simply destroying everything, but yet stuck in the fastboot screen. What I did? Well, I downloaded the TGRZ of an older version of xiaomi mi a3 firmware, the android 10, as I was tired and thought that maybe if I downgraded it I would get my phone to get rid of android 11 bugs and sleep for good till tomorrow, that is today. I ran the script to wipe anything and install the system over it and it did successfully, then the message "successfully installed, press any key to finish" but then the prompt closed and the phone tried to reboot but fell into a hard brick. The computer recognizes the device as the name "QUSB_BULK_CID:0411_SN:EFCF04FD" and the hardware ID "USB\VID_05C6&PID_9008" matches the original.
So is there anything I could do yet? Phone warranty ended in january and that's why I tried that process, it is any worth?

BillyWroth said:
Okay so yesterday I decided to finally try to install TWRP to flash a custom rom on the system, but never thought it would give so much headache. My drivers were bad, the system locked and android 11 updating making the phone all sorts of bugs, I was anxious to get rid of it, and I did somehow. I was unable to flash TWRP into the recovery as the system partition type is different than usual for it seems, but the recovery partition was all weird, "no command" was stuck in the screen even after a hard reset through there. So I got Magisk and got Root and used Smart Flash to install TWRP through the running system and it landed successful. But when going to the recovery the TWRP screen was flickering, but I could send ADB commands yet and boot normally, I just couldn't access the recovery functions yet. So I flashed a different version of the TWRP with the IMG and the zip folder and nothing worked then I realized that maybe I should erase the partition before flashing it and then the murder. I found a tutorial on erasing stuff, but the whole process cost me more than twelve hours as I messed with so many things and was kinda learning the hows and dos.
But then I saw the command "fastboot erase system -w" that was a shortcut for all cleanup processes and I was wanting to wipe it again even to recover my google backup and be able to use my messenger apps. But it did erase, of course, the whole system and everything, simply destroying everything, but yet stuck in the fastboot screen. What I did? Well, I downloaded the TGRZ of an older version of xiaomi mi a3 firmware, the android 10, as I was tired and thought that maybe if I downgraded it I would get my phone to get rid of android 11 bugs and sleep for good till tomorrow, that is today. I ran the script to wipe anything and install the system over it and it did successfully, then the message "successfully installed, press any key to finish" but then the prompt closed and the phone tried to reboot but fell into a hard brick. The computer recognizes the device as the name "QUSB_BULK_CID:0411_SN:EFCF04FD" and the hardware ID "USB\VID_05C6&PID_9008" matches the original.
So is there anything I could do yet? Phone warranty ended in january and that's why I tried that process, it is any worth?
Click to expand...
Click to collapse
You should never try to install software for another board (mi mix 3 global is codenamed "perseus")...
If you are unable to reach fastboot and recovery, you may refer to this, since it sounds like your phone is in EDL mode:
Reboot to EDL mode from FASTBOOT!
Reboot to EDL mode from FASTBOOT! No more Test Point Method needed Technical Details: Redmi Note 3 support rebooting to EDL in Android Bootloader aboot module (the "reboot-edl" command) but fastboot utility doesn't recognize "reboot-edl" in the...
forum.xda-developers.com
I never encountered this issue so only do this if you're absolutely sure you have no other means of flashing anything on it (i.e. through fastboot), and use the appropriate firmware at all times for your specific model

CriGiu said:
You should never try to install software for another board (mi mix 3 global is codenamed "perseus")...
If you are unable to reach fastboot and recovery, you may refer to this, since it sounds like your phone is in EDL mode:
Reboot to EDL mode from FASTBOOT!
Reboot to EDL mode from FASTBOOT! No more Test Point Method needed Technical Details: Redmi Note 3 support rebooting to EDL in Android Bootloader aboot module (the "reboot-edl" command) but fastboot utility doesn't recognize "reboot-edl" in the...
forum.xda-developers.com
I never encountered this issue so only do this if you're absolutely sure you have no other means of flashing anything on it (i.e. through fastboot), and use the appropriate firmware at all times for your specific model
Click to expand...
Click to collapse
well it seems I recovered it back, I bricked it and somehow it just got into EDL mode without cable or opening it up. So I found a tutorial back on reddit showing how use GFIL to install the stock rom back. I used android 10 stock rom before bricking it, but as I just flashed everything on empty partitions it didn't work, it seems that the Qualcomm setup needs some kind of previous work to set everything up. Anyways I managed to boot it, but now I'm aware that I should use Lineage recovery instead of TWRP as Mi A3 support is lacking, that's why after installing it I got it flickering (no compatible version with the latest Android 11 firmware).

BillyWroth said:
well it seems I recovered it back, I bricked it and somehow it just got into EDL mode without cable or opening it up. So I found a tutorial back on reddit showing how use GFIL to install the stock rom back. I used android 10 stock rom before bricking it, but as I just flashed everything on empty partitions it didn't work, it seems that the Qualcomm setup needs some kind of previous work to set everything up. Anyways I managed to boot it, but now I'm aware that I should use Lineage recovery instead of TWRP as Mi A3 support is lacking, that's why after installing it I got it flickering (no compatible version with the latest Android 11 firmware).
Click to expand...
Click to collapse
hello, im having maybe a similiar case with my phone (in this case its a MI A3) i installed "succefully" evolution x 6.3 on my phone and everthing was ok with a few bugs, the only problem was that mi cannot connect to internet, so i decided to restart the phone and now my phone just don't turn on, the power button don't respond and i cannot start up my phone and its just a black screen, if u remeber ¿can u pass the tutorial that u saw on reddit? maybe it can help me