Related
I recently just rooted my phone (Nexus 6) and added custom ROM and custom back up for CM12 but when everything booted up there were no Google apps and I cannot download any apps as well bc there is no play store? How do I get Gapps on my phone without having to use a PC bc I got through this whole process without one so I need to finish it likewise and plus I do not have a computer yet.
Chessiwill said:
I recently just rooted my phone (Nexus 6) and added custom ROM and custom back up for CM12 but when everything booted up there were no Google apps and I cannot download any apps as well bc there is no play store? How do I get Gapps on my phone without having to use a PC bc I got through this whole process without one so I need to finish it likewise and plus I do not have a computer yet.
Click to expand...
Click to collapse
To avoid future confusion are you on cm12.0 or cm12.1? Gapps packages are available as a zip package which you flash in recovery just like a ROM (but over the top, after ROM install ).
If you can work out the one you want without further help from me, I recommend slim gapps. Just pick the correct one you want, download on phone to storage and flash in recovery.
Ok so I am currently running cm12.1 and I have downloaded a zip file for the gapps but of course its not compatible with any of CM12.1's stock apps. So the question is how do I correctly flash in recovery and get the gapps file unzipped.
also when I try to flash it it in recovery my twrp is not loading up. It says "cyanogen Recovery" Im not sure hwats going on but what can i do excatly
Chessiwill said:
Ok so I am currently running cm12.1 and I have downloaded a zip file for the gapps but of course its not compatible with any of CM12.1's stock apps. So the question is how do I correctly flash in recovery and get the gapps file unzipped.
Click to expand...
Click to collapse
Why would it not be compatible? All GApps are are things like sync and more surface level apps like YouTube. Link me the exact package you downloaded and I'll tell you if its ok. Just do a nandroid backup and flash, the worse that can happen is that it doesn't work and you have to restore.
HTCDreamOn said:
Why would it not be compatible? All GApps are are things like sync and more surface level apps like YouTube. Link me the exact package you downloaded and I'll tell you if its ok. Just do a nandroid backup and flash, the worse that can happen is that it doesn't work and you have to restore.
Click to expand...
Click to collapse
So when i hold down the power button its gives me the option to reboot and i choose reboot then it says recovery or bootloader and i go to recovery. Instead of Twrp its just boots to "cyanogen recovery" and when im there i pressed install update because i want to install the gapps (I have the gapps zip file in my download folder) but after i press it it just says install failed and it prompts me back to recovery screen.
so i pressed reset on accident now i do not have anything on my phone expect for the cm12.1 because I checked the file manager and all my other twrp dowloads are gone as well as everything.
SO am i screwed or can i recovery from this failure.
Mind you i have a nexus 6
Chessiwill said:
So when i hold down the power button its gives me the option to reboot and i choose reboot then it says recovery or bootloader and i go to recovery. Instead of Twrp its just boots to "cyanogen recovery" and when im there i pressed install update because i want to install the gapps (I have the gapps zip file in my download folder) but after i press it it just says install failed and it prompts me back to recovery screen.
so i pressed reset on accident now i do not have anything on my phone expect for the cm12.1 because I checked the file manager and all my other twrp dowloads are gone as well as everything.
SO am i screwed or can i recovery from this failure.
Mind you i have a nexus 6
Click to expand...
Click to collapse
So you mean you have no ROM to boot into?
I'm not familiar with Cyanogen recovery... try to see if you can flash the ROM from the "install update" option.
If this succeeds, I recommend flashing TWRP as this will present far fewer issues than Cyanogen recovery.
Will I need a computer?
Chessiwill said:
Will I need a computer?
Click to expand...
Click to collapse
For which part? If you can boot into Cyanogen recovery, and you have the ROM zip file on your phone, then flash that using "install update" in recovery then boot it. If that works I'll guide you from there.
For the TWRP part, possibly. Some phones work fine just with the TWRP app.
Okay can you boot into a working ROM or not? if you can then don't worry, it's an easy fix. Alright so since you factory reset your device you'll have to go into settings and enable developer options and enable root. Once you did that download TWRP Manager and install TWRP for your Nexus 6. Now you're rid of that useless CyanogenMod recovery (only thing you can do with that is factory reset and install CM). Then redownload whatever Gapps you had tried to flash and flash them over CM12
Blu8 said:
Okay can you boot into a working ROM or not? if you can then don't worry, it's an easy fix. Alright so since you factory reset your device you'll have to go into settings and enable developer options and enable root. Once you did that download TWRP Manager and install TWRP for your Nexus 6. Now you're rid of that useless CyanogenMod recovery (only thing you can do with that is factory reset and install CM). Then redownload whatever Gapps you had tried to flash and flash them over CM12
Click to expand...
Click to collapse
So I downloaded the apk TWRP and it would not let me install the latest version (maybe because that was the one i installed orignally before i reset the phone) but it let me download the one right before the newest one "Twrp-2.8.7.0-shamu.img" to be excat. And prior to this i had already downloaded the slim Gapps as a zip ( i used the link that "HTCDreamOn" gave me on earlier in the thread) and they are located in my downloads folder.
Boom so i reboot the phone into recovery and finally Twrp recovery pops up instead of the cm recovery so thats good news but when i pressed install to flash the gapps they were not there in fact next to internal memeory it said "0 MB". so why is it saying i have nothing in my memory. I mean the download folder didnt even show up
Can you make a backup? What I mean is, does TWRP function otherwise or does everything say 0mb? When you go into the "mount" section is data checked?
Sent from my SM-G386T1 using Tapatalk
do I just need to download cm12.1 and gapps again and just wipe and backup then flash
Blu8 said:
Can you make a backup? What I mean is, does TWRP function otherwise or does everything say 0mb? When you go into the "mount" section is data checked?
Sent from my SM-G386T1 using Tapatalk
Click to expand...
Click to collapse
yes it is checked and it keeps saying
"E: Unable to mount /data/media/TWRP/ .twrps whentrying to read settings file."
and it keeps saying unable to mount storage
Hello everyone.
I had a problem flashing TWRP on my Google Nexus 5, or better the problem comes when I try to enter the recovery.
I followed this pattern from stock android 6.0.1 with august security patch:
1) unlock bootloader
2) downloaded lastest TWRP (3.0.2 hammerhead) recovery from the official website
3) flash it with "fastboot flash recovery recovery.img"
Until this point everything's alright but then when I unplug my phone from the laptop and click on enter recovery something strange happens.
I can see the TWRP boot image but as soon as I go in I see tons of errors related to "cannot mount ..." and some partitions name like /data, /cache, and then starts the bootloop without let me any chance to do something. Sorry but I can't see every error beacuse this happen too fast.
Any idea on what is going on?
I've tried the TWRP 3.0.1 but is the same shuold I go down or maybe I have to change it beacuse of compatibily issues with the monthly patches?
Thank you for your help, I hope I explained my problem clearly.
After unlocking the bootloader, phone wipe all data? Did you reboot after unlocking bootloader?
audit13 said:
After unlocking the bootloader, phone wipe all data? Did you reboot after unlocking bootloader?
Click to expand...
Click to collapse
No I've just unlocked and then tryied to flash the recovery without wipe.
But data is already wiped by unlocking the bootloader isn't it?
Anyway thanks for your reply as soon as I can I'll try what you have written.
Yes, the data should be automatically wiped. Try TWRP 2.87. If the phone still doesn't boot into TWRP, reflash stock recovery, flash userdata.img, immediately boot into stock recovery using the button combo without rebooting, perform a factory wipe, reboot into fastboot, and flash TWRP again.
audit13 said:
Yes, the data should be automatically wiped. Try TWRP 2.87. If the phone still doesn't boot into TWRP, reflash stock recovery, flash userdata.img, immediately boot into stock recovery using the button combo without rebooting, perform a factory wipe, reboot into fastboot, and flash TWRP again.
Click to expand...
Click to collapse
Thank you so much for telling me to flash the 2.8.7, i've choosen the 2.8.7.1 without success (it did't flash i don't know why) but then after another wipe all I've flashed the 2.8.7.0 and it seems to work.
The only thing I would like to ask now is: I'm going to flash superSU and elementalX over stock AOSP (I don't want custom ROM for now) and can this recovery cause problem because of it is not the last update?
Thank you again for the answer!
I have not tried 2.87 with Elemental X. The only way to determine whether it will work would be to try it. I recommend creating a nandroid backup before flashing Elemental so you can restore if something goes wrong.
TWRP Restore problem
Hi, I have an issue with the resotre of TWRP...
Here's what I did:
-Downloaded the latest OTA image https://developers.google.com/android/nexus/ota
-Downloaded latest SuperSU http://download.chainfire.eu/supersu-stable
-Downloaded latest ElementalX http://elementalx.org/devices/nexus-5/
-reboot to TWRP
Choose OTA, then SuperSU, then ElementalX
Luunch the restore..
And my screen is "blocked" from 5 hours on Install Zip 1 of 3.
"blocked" means doesn't move to the Zip2 but the clock is moving... the screen is locking itself after few seconds and I am able to unlock it...
Any idea how to exit properly ?
I have rebooted...deleted all my music... (I think that the issue may come from insufficient disk space) and relaunched...
Will see...
download Nexus Root Toolkit-type in google Nexus Root Toolkit - and watch from yuotoube how it work's
good luck
hunter-dz said:
download Nexus Root Toolkit-type in google Nexus Root Toolkit - and watch from yuotoube how it work's
good luck
Click to expand...
Click to collapse
My N5 was already rooted... and it's the second time that I update the OTA using directly TWRP... and for the August patch it has worked fine.
I don't know what's happen now...
kevtuning said:
My N5 was already rooted... and it's the second time that I update the OTA using directly TWRP... and for the August patch it has worked fine.
I don't know what's happen now...
Click to expand...
Click to collapse
Download thé nrt and i Will teach how to root ur n5
And type in Google nrt n5 xda
audit13 said:
I have not tried 2.87 with Elemental X. The only way to determine whether it will work would be to try it. I recommend creating a nandroid backup before flashing Elemental so you can restore if something goes wrong.
Click to expand...
Click to collapse
Now I can confirm that I was able to flash the lastest SuperSU and ElementalX with TWRP 2.8.7.0 without any problem, so thank you again for your help.
kevtuning said:
Hi, I have an issue with the resotre of TWRP...
Here's what I did:
-Downloaded the latest OTA image https://developers.google.com/android/nexus/ota
-Downloaded latest SuperSU http://download.chainfire.eu/supersu-stable
-Downloaded latest ElementalX http://elementalx.org/devices/nexus-5/
-reboot to TWRP
Choose OTA, then SuperSU, then ElementalX
Luunch the restore..
And my screen is "blocked" from 5 hours on Install Zip 1 of 3.
"blocked" means doesn't move to the Zip2 but the clock is moving... the screen is locking itself after few seconds and I am able to unlock it...
Any idea how to exit properly ?
Click to expand...
Click to collapse
Hi, I've have successfully installed the last OTA update but not with zip file, instead I downloaded the factory image and flashed with fastboot boot.img and system.img (also vendor.img if you have one) then rebooted into TWRP and installed the lastest ElementalX and SuperSU.
I'm not sure but I think that factory image zip file are not installable via recovery but only with the flash-all that comes with them. This script use fastboot to flash everything you need of the factory image
You can find this procedure on the ElementalX website, here is the link hope it can help out: http://elementalx.org/how-to-install-android-monthly-security-updates/
Finally... I installed CM13 and ElementalX... in some minutes ...
I suppose the the problem was in my zip file...
How would i install Android p/9/pie on my pixel since the bootloader is unlocked and rooted? Is there a guide i can follow? Would i use the factory image or the OTA file? Any help would be appreciated. Thank you in advance.
subvapor said:
How would i install Android p/9/pie on my pixel since the bootloader is unlocked and rooted? Is there a guide i can follow? Would i use the factory image or the OTA file? Any help would be appreciated. Thank you in advance.
Click to expand...
Click to collapse
Flash like every other factory image and all should be good.
phaino00 said:
Flash like every other factory image and all should be good.
Click to expand...
Click to collapse
Is it do able without a computer my laptop quit on me? If its not I'll have to wait till I'm around my moms house to do it. Ive only ever flash custom roms before so im not sure if it can be done with TWRP. Thanks for the help.
You need to use the fastboot tools, so you need your PC.
phaino00 said:
Flash like every other factory image and all should be good.
Click to expand...
Click to collapse
phaino00 said:
You need to use the fastboot tools, so you need your PC.
Click to expand...
Click to collapse
Okay thanks for the help.
Whats the difference between the files?
9.0.0 (PPR1.180610.009, Aug 2018)
9.0.0 (PPR1.180610.010, Aug 2018, Telus)
The Telus one is for people who have Telus for cell service. If you don't have Telus use the 009 if you have telus use 010. Google tends to do this from time to time.
phaino00 said:
Flash like every other factory image and all should be good.
Click to expand...
Click to collapse
Does this apply if you have custom recovery (TWRP) and modified boot.img (Magisk)?
I fastboot flashed the 9.0 files on top of the July 8.1 version without a data wipe. I had to reinstall TWRP and Magisk using the same install procedure I used on 8.1. Even though root was successfully working on Magisk 16 I had to install beta version 16.7 for the SafetyNet check to work properly.
Sent from my SHT-AL09 using Tapatalk
Butch1326 said:
I fastboot flashed the 9.0 files on top of the July 8.1 version without a data wipe. I had to reinstall TWRP and Magisk using the same install procedure I used on 8.1. Even though root was successfully working on Magisk 16 I had to install beta version 16.7 for the SafetyNet check to work properly.
Click to expand...
Click to collapse
How long did it take to boot after installing Magisk? I let my phone sit at the white boot screen for about 30 minutes before I had to reflash Pie again.
SkinnyT said:
How long did it take to boot after installing Magisk? I let my phone sit at the white boot screen for about 30 minutes before I had to reflash Pie again.
Click to expand...
Click to collapse
Not the exact same problem as yours, but I found that I wasn't able to boot into the OS after flashing Magisk 16.7. It would get to the animated "G" loading screen, but then reboot automatically and go into TWRP. Currently reflashing the stock (without wipe) and trying again.
Try installing the Magisk Uninstaller, then rebooting into system. If that doesn't work, you can use fastboot to install the boot.img file taken from the full factory image. If you already have it ready to go, it's faster than a full reinstall of the OS.
SkinnyT said:
How long did it take to boot after installing Magisk? I let my phone sit at the white boot screen for about 30 minutes before I had to reflash Pie again.
Click to expand...
Click to collapse
For me it did not take long for the Pixel to start after boot. Maybe a minute or two. It did take 5-10 minutes to run the Pie update.
Maybe it was because I originally installed Magisk 16 before going to version 16.7.
I agree with post-mortem's suggestion. It will be easier for you to reinstall Magisk before reinstalling the OS.
I've been starting out by flashing the factory image with adb. Then once it boots I can fastboot the twrp.img and get twrp into the recovery slot with no issues. I didn't get a chance today, but tomorrow I'll try with Magisk again.
post-mortem said:
Try installing the Magisk Uninstaller, then rebooting into system. If that doesn't work, you can use fastboot to install the boot.img file taken from the full factory image. If you already have it ready to go, it's faster than a full reinstall of the OS.
Click to expand...
Click to collapse
I did end up doing that, though I don't know if this itself solved my problem. I'll explain more below
daver68 said:
Not the exact same problem as yours, but I found that I wasn't able to boot into the OS after flashing Magisk 16.7. It would get to the animated "G" loading screen, but then reboot automatically and go into TWRP. Currently reflashing the stock (without wipe) and trying again.
Click to expand...
Click to collapse
I ended up fixing my problem. After posting this, I repeated my exact steps a few more times to make sure I wasn't doing something wrong.
1. boot into bootloader
2. fastboot factory image (without -w)
3. boot into stock Pie
4. fastboot boot twrp 3.2.2.0 image
5. install twrp 3.2.2.0 zip
6. reboot into recovery
7. flash Magisk 16.7
8. reboot into Pie
These steps didn't work, and I would always get into a bootloop that takes me straight to recovery
What I ended up doing that fixed my problem was the following
1. boot into bootloader
2. fastboot factory image (without -w)
3. boot into stock Pie
4. fastboot boot twrp 3.2.2.0 image
5. install twrp 3.2.2.0 zip
6. reboot into recovery
7. flash Magisk uninstaller
8. reboot recovery
9. flash Magisk 16.6
10. set boot partition to B
11. reboot into rooted Pie
Specifically, I used the Magisk Uninstaller, used an "older" version of Magisk (16.6, not the later 16.7), and I also changed my boot partition from A to B after flashing Magisk. This worked for me, and until I know specifically why, I'm going to just re-use this procedure on the next factory image update.
Hopefully this can help someone else having the same problem!
I used magisk on my phone for roots right but it has lost roots. I tried to go into recovery to reinstall magisk but recovery isnt booting, when it select advanced it gives me fastboot or recovery options but when I select recovery its goes back to the start again. I have tried to reinstall TWRP using this method
https://www.xda-developers.com/official-twrp-oneplus-6-huawei-p20-pro/
but I then get a crash dump window.
Please can I get some advice how to proceed?
Thanks
Make sure you're using 3.2.3, anything prior to that is not for Android Pie. If you updated your OS that is more than likely the reason you lost root. Make sure that you download TWRP.img and fastboot through the image before you try to install TWRP permanently
dgunn said:
Make sure you're using 3.2.3..............
Click to expand...
Click to collapse
Aha! I did wonder but I followed the guide to the letter as I thought I might brick the phone if I risked the other imgs. I did sort it by using a different TWP file.
Regards
Westindieman said:
Aha! I did wonder but I followed the guide to the letter as I thought I might brick the phone if I risked the other imgs. I did sort it by using a different TWP file.
Regards
Click to expand...
Click to collapse
Good deal glad you got everything working.
I'm on stock android 10 and I have accepted an update I was offered yesterday. It seems everytime I update I have an issue rooting and installing TWRP (last month I was bricked), maybe because I use the last TWRP version I have before the update (currently twrp-3.3.1-1-enchilada). What is the correct process for installing TWRP and rooting again with Magisk? Do I need to get a TWRP update each time?
You have to install the latest one (3.3.18).
Reboot fastboot, type fastboot boot 'recoveryname'.img, once time you are in twrp flash the installer from the inside. Reboot to recovery again and flash magisk.
When you need to update you have two ways:
1 download the full ROM zip and place it in your main storage folder (sd card);
Update via local update but don't reboot;
Open magisk and download and install twrp a/b retention script and don't reboot yet;
Go in the magisk main page and install it as installation in the inactive slot (after OTA);
Reboot and enjoy.
2 download the full zip;
Reboot in twrp;
Flash rom + twrp installer;
Reboot to recovery;
Flash magisk;
Reboot and done.
°Washy said:
You have to install the latest one (3.3.18).
Reboot fastboot, type fastboot boot 'recoveryname'.img, once time you are in twrp flash the installer from the inside. Reboot to recovery again and flash magisk.
When you need to update you have two ways:
1 download the full ROM zip and place it in your main storage folder (sd card);
Update via local update but don't reboot;
Open magisk and download and install twrp a/b retention script and don't reboot yet;
Go in the magisk main page and install it as installation in the inactive slot (after OTA);
Reboot and enjoy.
2 download the full zip;
Reboot in twrp;
Flash rom + twrp installer;
Reboot to recovery;
Flash magisk;
Reboot and done.
Click to expand...
Click to collapse
Some good news, it all went smoothly this time and thanks for your help. Really helpfull into there about updating too. Many Thanks
Westindieman said:
Some good news, it all went smoothly this time and thanks for your help. Really helpfull into there about updating too. Many Thanks
Click to expand...
Click to collapse
Np man. If you wanna make me happy press like button
You know, sometimes its too easy to forget to do that.
Prerequisite
1. Unlocked Bootloader
2. OrangeFox Recovery or TWRP Recovery
3. Latest adb & fastboot files
4. Stock ROM ZIP files
5. Stock Recovery [OPTIONAL]
Custom Recovery Method:
1. Enable USB-Debugging: adb reboot recovery or hold the volume up while rebooting or hold the volume down to enter bootloader & choose Reboot to Recovery by volume buttons, power key to enter.
2. Copy the Stock ROM zip to your device via adb push RMX1851_flashable_*.zip /sdcard or MTP
3. Wipe data, cache & dalvik (format data if stuck at boot animation)
4. Locate the zip file & Install
5. Flashing all the partitions with stock files takes time. Hold for a while.
6. After successful install of the zip. Your device will have Stock Recovery with Stock ROM. Finally Reboot.
Fastboot Method:
Note: Following process formats internal storage, so backup the internal storage files. If your device is in Stock ROM & somehow system partition is messed up just flash only system.
1. Download required Fastboot files
2. If downloaded 7z files, extract system.img file.
3. Enter
Code:
fastboot -w && fastboot erase system && fastboot flash recovery recovery.img && fastboot flash boot boot.img && fastboot flash vbmeta vbmeta.img && fastboot flash dtbo dtbo.img && fastboot flash system system.img && fastboot reboot
4. It takes a while to flash System partition, have patience.
5. Device reboots to system if everything is flashed successfully.
Stock Recovery Method:
1. Download Stock ROM OZIP Files & Stock Recovery
2. Copy *.ozip to sdcard or internal storage.
2. Goto fastboot & enter fastboot flash recovery recovery.img
3. Reboot to recovery, wipe (1st option). Then go back to main menu Install from storage locate the *.ozip file & install.
I'm sorry, but this doesn't work for me..stuck with the rooted but uninstalled magisk OS.. :'(
ceesiama said:
I'm sorry, but this doesn't work for me..stuck with the rooted but uninstalled magisk OS.. :'(
Click to expand...
Click to collapse
zip isn't installed successfully? can you also send screenshot, so I can help you.
4j17h said:
zip isn't installed successfully? can you also send screenshot, so I can help you.
Click to expand...
Click to collapse
https://forum.xda-developers.com/realme-3-pro/how-to/guide-unlock-bootloader-install-twrp-t3938845
I followed this guide, everything went smooth, magisk was also installed and rooted. But I tried setting fingerprint and set lock pin, But it says wrong pin everytime, so i had to reset the phone again. I used the same method above. But this time magisk won't install no matter how many times I reset my phone using the above method. So I thought if I could revert back to stock, maybe I can root and install magisk again. So i followed your guide.
After installing the stock zip and reboot to system, it stuck on bootloop(realme logo), then I flash back using the above method again, I can log in to the phone, and red notification says root has been detected, but magisk is not installed, ive tried many things but still i cannot install magisk. I've tried your guide 2/3 bootloop everytime. What could be the problem? I am not very much of a tech genus :'(
ceesiama said:
https://forum.xda-developers.com/realme-3-pro/how-to/guide-unlock-bootloader-install-twrp-t3938845
I followed this guide, everything went smooth, magisk was also installed and rooted. But I tried setting fingerprint and set lock pin, But it says wrong pin everytime, so i had to reset the phone again. I used the same method above. But this time magisk won't install no matter how many times I reset my phone using the above method. So I thought if I could revert back to stock, maybe I can root and install magisk again. So i followed your guide.
After installing the stock zip and reboot to system, it stuck on bootloop(realme logo), then I flash back using the above method again, I can log in to the phone, and red notification says root has been detected, but magisk is not installed, ive tried many things but still i cannot install magisk. I've tried your guide 2/3 bootloop everytime. What could be the problem? I am not very much of a tech genus :'(
Click to expand...
Click to collapse
ok no problem, so what do you want to know about? Clear data, cache, dalvik after or before flashing stock zip it won't bootloop. Yes, since device is decrypted lock screen doesn't work. Coming to Magisk, yes that method is not reliable. I have figured out 100% working way which works for everyone & doesn't fail anytime. Maybe I will make a new guide soon or ...Mod edit: Link to Telegram removed
4j17h said:
ok no problem, so what do you want to know about? Clear data, cache, dalvik after or before flashing stock zip it won't bootloop. Coming to Magisk, yes that method is not reliable. I have figured out 100% working way which works for everyone & doesn't fail anytime. Maybe I will make a new guide soon or ...Mod edit: Link to Telegram removed
Click to expand...
Click to collapse
I'm sorry I mistyped in the above comment, when i followed your method, zip installed successfully but it bootlooped into stock recovery everytime. I hope that clarifies a bit. I''ll be very grateful if you can help me..
ceesiama said:
https://forum.xda-developers.com/realme-3-pro/how-to/guide-unlock-bootloader-install-twrp-t3938845
I followed this guide, everything went smooth, magisk was also installed and rooted. But I tried setting fingerprint and set lock pin, But it says wrong pin everytime, so i had to reset the phone again. I used the same method above. But this time magisk won't install no matter how many times I reset my phone using the above method. So I thought if I could revert back to stock, maybe I can root and install magisk again. So i followed your guide.
After installing the stock zip and reboot to system, it stuck on bootloop(realme logo), then I flash back using the above method again, I can log in to the phone, and red notification says root has been detected, but magisk is not installed, ive tried many things but still i cannot install magisk. I've tried your guide 2/3 bootloop everytime. What could be the problem? I am not very much of a tech genus :'(
Click to expand...
Click to collapse
Try install magisk manager, maybe ur device still rooted
haditriw said:
Try install magisk manager, maybe ur device still rooted
Click to expand...
Click to collapse
no that's not how magisk works in Realme 3 Pro, if device is restarted there will be no magisk. You need to goto fastboot then goto recovery, it boots to system. We have magisk. Yes this method tricky. I am going to publish new guide, it will be simple & straight forward.
Bricked/ Bootlooping
4j17h said:
Prerequisite
1. Unlocked Bootloader
2. OrangeFox Recovery or TWRP Recovery or Pitch Black Recovery
3. Latest adb & fastboot files
4. Stock ROM zip files: RMX1851_A15
5. Stock Recovery [OPTIONAL]
Follow the below steps:
1. Enable USB-Debugging: adb reboot recovery or hold the volume up while rebooting or hold the volume down to enter bootloader & choose Reboot to Recovery by volume buttons, power key to enter.
2. Copy the Stock ROM zip to your device via adb push RMX1851_flashable_A15.zip /sdcard or MTP
3. Wipe data, cache & dalvik
4. Locate the zip file & Install
5. Flashing all the partitions with stock files takes time. Hold for a while.
6. After successful install of the zip, Reboot to System. You get the stock Recovery & stock ROM.
Previous Firmware: RMX1851_A14 Google Drive || AndroidFileHost || Mega Cloud storage
Note: This guide will be updated in coming days with fastboot flash files & custom recovery flashable files with latest versions.
Click to expand...
Click to collapse
pls help me, im stuck on bootlooop :'(
---------- Post added at 04:53 PM ---------- Previous post was at 04:52 PM ----------
4j17h said:
Prerequisite
1. Unlocked Bootloader
2. OrangeFox Recovery or TWRP Recovery or Pitch Black Recovery
3. Latest adb & fastboot files
4. Stock ROM zip files: RMX1851_A15
5. Stock Recovery [OPTIONAL]
Follow the below steps:
1. Enable USB-Debugging: adb reboot recovery or hold the volume up while rebooting or hold the volume down to enter bootloader & choose Reboot to Recovery by volume buttons, power key to enter.
2. Copy the Stock ROM zip to your device via adb push RMX1851_flashable_A15.zip /sdcard or MTP
3. Wipe data, cache & dalvik
4. Locate the zip file & Install
5. Flashing all the partitions with stock files takes time. Hold for a while.
6. After successful install of the zip, Reboot to System. You get the stock Recovery & stock ROM.
Previous Firmware: RMX1851_A14 Google Drive || AndroidFileHost || Mega Cloud storage
Note: This guide will be updated in coming days with fastboot flash files & custom recovery flashable files with latest versions.
Click to expand...
Click to collapse
pls help me, im stuck on bootloop :'(
malakaz27 said:
pls help me, im stuck on bootlooop :'(
---------- Post added at 04:53 PM ---------- Previous post was at 04:52 PM ----------
pls help me, im stuck on bootloop :'(
Click to expand...
Click to collapse
I have seen you have started a new thread of bootloop. Is this because you flashed one of these stock zip? you were going back to stock from los?
this method worked perfectly fine for me. i tried both lineage os roms available and both of them caused bootloop or end up destroying boot. so thanks to developer for making this zip file.
4j17h said:
I have seen you have started a new thread of bootloop. Is this because you flashed one of these stock zip? you were going back to stock from los?
Click to expand...
Click to collapse
hi i am stuck in bootloop after flashing all stuff in fastboot guide
leo77g said:
hi i am stuck in bootloop after flashing all stuff in fastboot guide
Click to expand...
Click to collapse
bootloop to recovery? have you tried fastboot -w usually this should boot to system or else flash stock recovery, wipe full. This should definitely get back the device to system.
4j17h said:
bootloop to recovery? have you tried fastboot -w usually this should boot to system or else flash stock recovery, wipe full. This should definitely get back the device to system.
Click to expand...
Click to collapse
formatting worked and thanx for help )
Moderators' Announcement: I've removed the links to Telegram and references to it. This is not a development thread, and support is to be provided through XDA. Many posts proved this has not been the case!
You may be asking, "Why was my Telegram or Whatsapp thread closed?"
Well, it's just becoming too much.
Going forward, we will only allow one Telegram chat link on a development thread by the ROM's developer and only if thorough support is still provided in the ROM thread on XDA.
All discussion channels, photography channels, whatnot channels will be strongly discouraged and removed with immediate effect. Please reference the forum rules:
Self-promotion is forbidden, this includes blogs, social media and video channels etc. Random links will be removed.
Click to expand...
Click to collapse
Also, we now have an official XDA Discord Server. We would encourage you to try it out.
Announcing the Official XDA-Developers Discord Server
FYI
Thanks,
The Moderation Team
Click to expand...
Click to collapse
Need Help
Hi, everybody. Really need help.
There is a phone Realme X Lite. Write that it is Realme 3 Pro for the Chinese market, as well as firmware.
My version was: RMX1851_11_A.05
Tried to flash RMX1851EX_11_OTA_0150_all_2Zfcensdoezk.ozip, recovery gave an error, *_0140_* wrote that the current version is newer.
In depth test APK on the version out of the box wrote that this version of the phone is not supported, so the bootloader could not unlock.
But in the official website came across an offer to join the testing of Android Q
r1.realme.net/general/20190522/1558492614147.pdf
There are two files, the second for rollback.
I installed P2Q, everything went well, but the SnapDragon camera is used and it is terrible if there is not enough light. In depth test is not even installed, apparently not supported in the new version.
I decided to roll back, chose in Recovery Q2P archive, there were no errors, but after rebooting the phone hangs on the initial screen saver and after 10 minutes throws in the recovery with the error "Data error, select wipe data to recovery system". Wipe doesn't help. The same with other archives for Realme 3 Pro.
Also found RMX1851_11_A.12_190423_abecd1fa.ofp for firmware via MsmDownloadTool, but it requires authorization and support refuses to call login details.
Can who faced a similar problem on this or other phone.
Please help, pay for the time spent =)
ResSetOk said:
Hi, everybody. Really need help.
There is a phone Realme X Lite. Write that it is Realme 3 Pro for the Chinese market, as well as firmware.
My version was: RMX1851_11_A.05
Tried to flash RMX1851EX_11_OTA_0150_all_2Zfcensdoezk.ozip, recovery gave an error, *_0140_* wrote that the current version is newer.
In depth test APK on the version out of the box wrote that this version of the phone is not supported, so the bootloader could not unlock.
But in the official website came across an offer to join the testing of Android Q
r1.realme.net/general/20190522/1558492614147.pdf
There are two files, the second for rollback.
I installed P2Q, everything went well, but the SnapDragon camera is used and it is terrible if there is not enough light. In depth test is not even installed, apparently not supported in the new version.
I decided to roll back, chose in Recovery Q2P archive, there were no errors, but after rebooting the phone hangs on the initial screen saver and after 10 minutes throws in the recovery with the error "Data error, select wipe data to recovery system". Wipe doesn't help. The same with other archives for Realme 3 Pro.
Also found RMX1851_11_A.12_190423_abecd1fa.ofp for firmware via MsmDownloadTool, but it requires authorization and support refuses to call login details.
Can who faced a similar problem on this or other phone.
Please help, pay for the time spent =)
Click to expand...
Click to collapse
since your bootloader is locked, all you can do is wipe full data or flash back P2Q then format & then flash Q2P.
4j17h said:
since your bootloader is locked, all you can do is wipe full data or flash back P2Q then format & then flash Q2P.
Click to expand...
Click to collapse
I did Wipe before and after firmware, on P2Q is stitched without problems, but under firmware in Q2P in recovery writes, that not managed wipe userdata. The data was not encrypted, the password is not asked.
do you have video for Fastboot Method ?
[No message]