Well, I tried getting the device connected properly in diagnose mode, but failed. I rooted the phone, tried the "- setprop sys.usb.config diag,adb" but that did nothing.
Then I tried something else, from this thread - setprop persist.vendor.usb.config (and sys.usb.config) diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb
Not only did I not get the diagnose EDL mode working, but my USB connection now fails, it no longer sees a USB cable connected. I reformatted and reinstalled the first .eu beta rom, and all seemed fine again. But installing the latest stable rom it again does nothing when connecting through USB.
So perhaps re-rooting and setting those values right might help. Anyone know what they should be? Or any other suggestions?
Thanks.
EDIT: forgot to put in the link, so added it, I meant this thread
EDIT2: Perhaps I was pannicing, reinstalling the rom seems to have solved the problem.
Related
After flashing EB v2.5 I could no longer acess files via usb cord, I have since switched to Phoenixblood v1.1 with the same results. Upon searching for similar issues I have found there are many people with this same problem and cannot seem to find a resoultion, I have tried different drivers with no luck. Here are some qoutes from others with the same issue:
I love it! It's the fastest rom I've ever used! But like all other roms I flash I cant use USB mass storage . suggestions anyone?
Click to expand...
Click to collapse
I am having the exact same problem. It only charges. Other than that there is no other indication either from the computer or the phone that it is even plugged into the computer. Really cramping my style. I am sure I speak for you in saying anyone's help on the matter would be greatly appreciated.
Click to expand...
Click to collapse
Hey all thanks in advance for any help. Ive been using weapon for a while now but got sick of the fc's so decided to try out eaglesblood. Ive installed it twice now and followed the instructions each time but I cant get my computer to mount my phones storage. It does make a noise when i connect it, so i know it sees my phone. And my phone gives me the option to use as mass storage but nothing happens. Any ideas? Does anyone else have problems with this?
Click to expand...
Click to collapse
I would post this in the related ROM thread, but I cannot since im new, any help would be greatly appreciated!
jacko147 said:
After flashing EB v2.5 I could no longer acess files via usb cord, I have since switched to Phoenixblood v1.1 with the same results. Upon searching for similar issues I have found there are many people with this same problem and cannot seem to find a resoultion, I have tried different drivers with no luck. Here are some qoutes from others with the same issue:
I would post this in the related ROM thread, but I cannot since im new, any help would be greatly appreciated!
Click to expand...
Click to collapse
Different USB? Sometimes they can "die."
I tried a different cable and a different computer with a different op sys
just for the sake of troubleshooting, can you take a screenshot of your device manager before and after you plug it in? I had my phone randomly do something similar, but I just wiped my system and reinstalled the drivers and all was fine, different problem than yours but any information you can give us is helpful.
happened to me... what i did was turn on usb debugging with the usb storage and apparently it work...
I noticed I couldn't mount USB mass storage on CM7 or clockwork recovery....using multiple computers. I fixed this by installing the LG USB drivers on my desktop....I've had no issues since. Though I had previously tried the same thing with my laptop and it didn't work.
If turning USB debugging off then on doesn't work I reinstall the drivers. Its happened to me once or twice and that seems to do the trick.
Get my app: Speakerphone Volume Control
Edit:
This problem has been solved. For any of you that are having issues with ADB recognizing your phone, even after you have uninstalled and reinstalled the correct drivers (As I had done several times on 2 computers), a factory reset might be your answer. So, if you are on ICS leak, and the last thing you want to do is try to FXZ back to 2.3.6...Try wiping data/factory reset first. It solved my problem once and for all.
------------------------------------------------------------------------------------------------
First, I must say that I have already found similar threads of this type, and some even with solutions, but I still cannot fix this problem.
I am on ICS Leak on my AT&T Atrix 2 and everything is running great, aside from one thing. I cannot get my computer to recognize my device. When I plug it in, it will charge, but I get no USB options in my notification bar on my phone. I have tried other solutions, and I have installed the necessary drivers, (Windows 7), I have uninstalled and reinstalled, and rebooted with no luck. If anyone could help me, that would be great! Let me know if any more details are needed...
Recognition problem solved. Root script still hanging at *daemon started successfully*
Debugging is on, Stay awake on, Install from unknown sources on, drivers installed, what else could be the problem?
I had to uninstall drivers and all moto services. Then plug in phone let it look for install drivers. It failed on one of them. I then installed the moto portal disconnected my phone, rebooted computer and phone, plugged it back in and it worked. Good luck.
Sent from my MB865 using Tapatalk 2
Garnerj013 said:
Recognition problem solved. Root script still hanging at *daemon started successfully*
Debugging is on, Stay awake on, Install from unknown sources on, drivers installed, what else could be the problem?
Click to expand...
Click to collapse
First off if you found similar threads post in them, no need to start a new thread
I'm guessing you are trying to root?
if you are, the script takes a while to run your phone will reboot several times it will tell you when it is done
Garnerj013 said:
Recognition problem solved. Root script still hanging at *daemon started successfully*
Debugging is on, Stay awake on, Install from unknown sources on, drivers installed, what else could be the problem?
Click to expand...
Click to collapse
adb devices command showing your device? If so, try again.. and wait, like drgravy said.
Or do what leif said and switch between the 3 different usb connection types and wait for the drivers to install.. and try putting it in mtp or ptp mode to run the root batch file..
Sent from my phone's mind
Drgravy said:
First off if you found similar threads post in them, no need to start a new thread
I'm guessing you are trying to root?
if you are, the script takes a while to run your phone will reboot several times it will tell you when it is done
Click to expand...
Click to collapse
Sorry about the new thread. Blame it on the n00b status. I have rooted with this method before on the same model phone with ICS leak and it worked after a few unsuccessful tries. It usually shows some activity in the command prompt, but this time it is hanging at *daemon started successfully*
alteredlikeness said:
adb devices command showing your device? If so, try again.. and wait, like drgravy said.
Or do what leif said and switch between the 3 different usb connection types and wait for the drivers to install.. and try putting it in mtp or ptp mode to run the root batch file..
Click to expand...
Click to collapse
I've tried in every connection mode, and I have the drivers installed. I've been trying every way possible. Also, for simplicity sake, could you tell me how to use the adb devices command? I'm tech savvy but pretty green to the development/programming side of things.
leifemagnuson said:
I had to uninstall drivers and all moto services. Then plug in phone let it look for install drivers. It failed on one of them. I then installed the moto portal disconnected my phone, rebooted computer and phone, plugged it back in and it worked. Good luck.
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
Also, once i uninstall Motorola Device Manager, do I have to manually uninstall more drivers, or does that get them all? If not, how do I manually uninstall the drivers?
http://forum.xda-developers.com/showthread.php?p=29609879
I was having the exact same issue where it was hanging at daemon started successfully. Was totally a driver issue. Follow the link in my link...
I would suggest completely uninstalling everything Moto from your PC, rebooting and then follow the steps again, being sure to install those new drivers that are linked in that post.
Edit: I'm trying to remember when I did it....but I seem to recall having a bit of weirdness when I installed the new drivers. I had the install driver wizard pop up while I was installing the drivers from the moto driver executable. I just let the wizard sit there and wait while the moto driver installer did its thing.
So, instead of uninstalling all that is Moto on my laptop, I moved the Moto Device Driver executable and the batch files (with Su and Superuser.apk and all the extras to my desktop. Ran the moto executable and plugged my phone in to install the drivers and rebooted the computer. Still nothing. Do i need adb on my desktop to root my phone? I'm getting flustered with this. It really should be working one way or the other....
Same issue for me..i reinstalled drivers and connected the phone in media transfer mode..rest of procedure same..am successfuly rooted now
Sent from my MB865 using xda app-developers app
devilhunter47 said:
Same issue for me..i reinstalled drivers and connected the phone in media transfer mode..rest of procedure same..am successfuly rooted now
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
I tried and tried to reinstall the drivers, and even installing them on a different PC didn't work. Finally, I did a factory reset, and the phone was recognized by ADB. Thankfully, I am now rooted and on SCv7!! (Thanks to Jimbridgman, Ikrasner, and a couple other devs.) Thank you all.
Howdy, folks. I recently bricked my tablet thanks to a bad install of CWM, but following Buster's guide I was able to successfully reflash stock firmware and the device runs fine when booted up now.
However, now ADB is not detecting my device. At all. I have tried running the kill-server and start-server commands to see if that would do the trick to no avail. I'm not even receiving an error saying "device not found." Rather, the device listing is left blank whenever I enter the devices command into the command prompt. I can still send commands via fastboot, but I'm concerned that there's something here that I'm missing, or that I have somehow managed to completely bork the motherboard. I have already tried uninstalling and reinstalling the Asus usb drivers, in addition to the ADB drivers/software to no avail.
Does anyone have any suggestions to getting ADB to work for my tablet again? I have scoured the web, particularly these forums, for days looking for an answer, but haven't turned anything up yet. Any help would be greatly appreciated.
Does usb debugging is on?
Graiden05 said:
Does usb debugging is on?
Click to expand...
Click to collapse
Yes, USB debugging is enabled; yes that was the first thing I checked.
Any other ideas?
If You use asus drivers it worth to try universal naked driver.
Graiden05 said:
If You use asus drivers it worth to try universal naked driver.
Click to expand...
Click to collapse
I'll give that a shot this evening.
Graiden05 said:
If You use asus drivers it worth to try universal naked driver.
Click to expand...
Click to collapse
I just installed the naked drivers and tried again, but that didn't work either. Fastboot still works just fine, but I'm still at a complete loss as to how to get adb working again.
Thanks for your help thus far.
Hmm... How windows show tablet when You connect it to PC?
Graiden05 said:
Hmm... How windows show tablet when You connect it to PC?
Click to expand...
Click to collapse
Yeah everything *looks* normal, and appears to be acting normally whenever I have the tablet plugged in. When my tablet is booted up and connected to my pc, I can transfer files to and from with no issue. Also when it's plugged in, there are two different entries under the device manager (one for adb and the other for the tablet itself). It's only when I have my tablet running in bootloader mode that things don't seem to want to work correctly.
I even ran netstat last night to see if there were any programs/services using the same port as adb, and even that turned up nothing. Is it possible that I somehow inadvertently altered the settings on my tablet's motherboard when I installed a bad version of CWM, per my original post?
It shouldn't be posible to brick anything on motherboard with just flash wrong recovery. It might be just "too smart" windows, that reject to use adb driver on same device that alredy used by mtp one. It wasn't a problem before?
Graiden05 said:
It shouldn't be posible to brick anything on motherboard with just flash wrong recovery. It might be just "too smart" windows, that reject to use adb driver on same device that alredy used by mtp one. It wasn't a problem before?
Click to expand...
Click to collapse
It wasn't a problem until I flashed the wrong version of CWM, got stuck in a boot-loop and fixed the problem using fastboot to completely wipe my tablet and start over from scratch.
Edit: I suppose I could try a fresh install of Windows.
Try first remove all drivers and software for tablet. Then install universal naked driver.
Graiden05 said:
Try first remove all drivers and software for tablet. Then install universal naked driver.
Click to expand...
Click to collapse
Update: finally got adb to detect my device. Ended up removing everything Android-related from my desktop and re-downloaded/installed everything, including usb drivers. That did the trick.
Thanks again for the help.
hi,
i've been trying to s-off with rumrunner, and one of the pre-requisites is to remove htcsync. after doing so, i can't see my phone with adb. i've tried installing htc drivers and reinstalling adb/fastboot files, but still isn't working. also i tried reinstalling htcsync but again, still not working.
any ideas?
thanks in advance!
I keep having this problem lately. I just keep trying to reconnect the usb until it works. I'd like a fix too.
Sent from my rotary phone.
Did you enabled usb debugging. If not that should be the problem
Sent from my HTC One S
aye, usb debugging is enabled and i've given adb SU access etc.
sometimes when i put in adb devices, it shows as a number + emulation... does that help diagnose the issue?
fixed this by re-flashing my stock rom, reinstalling htcsync and updating android sdk. uninstalled htcsync, went back to my daily rom (twistedkat) and i still have adb usage. odd.
I can't connect my honor 6x to any laptop or pc's after installing custom rom !!:crying:
some time it connects(very rare) but most of the time not
It not even connecting to other pc's also(tried lots of pc's )
*debugging mode is on
*I have all necessary drivers in my laptop.
*I have original usb cable.
I've searched all the post in question and answers thread but didn't find anything related to tthis
Please sggest me ,,what is the reason and how can I resolve this issue.
Thanks
Have you tried another USB cable..? If yes, the only thing that comes in my mind is that it looks like the android.process.media package (that handles the Mtp service) is missing. The flashing process of the rom went 100% good, or you've noticed other issues? And, which rom you've flashed?
RedSkull23 said:
Have you tried another USB cable..? If yes, the only thing that comes in my mind is that it looks like the android.process.media package (that handles the Mtp service) is missing. The flashing process of the rom went 100% good, or you've noticed other issues? And, which rom you've flashed?
Click to expand...
Click to collapse
I've flashed elite rom 7.7,I tried different usb cables also.
I will check for android.process.media .
Thanks for the suggestion.