Database Info

[Patch] Add Arabic Support to any ROM [0.97][Updated 9-5-2012]

IT's NoT My WORK - I've already added the source at the end
There is a lot of new roms which are released every week or two,...
and there is a lot of them which have no support for arabic letters
But it's ok,...
you can add the arabic support [RTL] to any rom in less than 5 Minets
AND IF YOU ARE A DEVELOPER PLEASE ADD IT TO YOUR CUSTOM ROM TOO
What is this patch doing?
framework.jar: takes care of shaping texts in android on all texts except Gmail and the browser
libwebcore.so: takes care of shaping texts in the default Browser and Gmail app.
Click to expand...
Click to collapse
So, This patcher will attempt to get you Arabic support in both of these files.
The coder [madmack]:
"This should work with all Android phones supporting Android Froyo or Gingerbread with the exception of MIUI ROMs as they are closed source and I can’t work with that."
Click to expand...
Click to collapse
Note: Please perform a backup of your system before attempting to use this patch.
Requirements:
Rooted Device
Android 2.1 at least
Your ROM needs to be deodexed.[!]
Java "32-bit" installed
[!] To find out if your installed ROM is deodexed, navigate to /system/framework on your phone. If you see a file called framework.odex then this patch will NOT work for you.
Click to expand...
Click to collapse
Steps to apply the patch:
Download the patch below and extract it to a folder on your computer.
Pull these files to the "input" folder
/system/framework/framework.jar
/system/lib/libwebcore.so
/system/lib/libandroid_runtime.so (If you’re not using a CyanogenMod ROM)
Run "commands.exe". (Do not close the black cmd screens that will pop up. Once the patch is done)
You should get a patched framework.jar, libwebcore.so and libandroid_runtime.so in the subfolder "output"
There is a recovery flashable file in folder output. Place that on your sdcard, reboot into recovery and flash it.[!!] [**]
[!!] It's better to replace the generated .zip "SYSTEM" Folder with The "SYSTEM" folder of any flashable .Zip which worked on your RECOVERY before
Click to expand...
Click to collapse
[**] If the flashing through recovery didn’t work for some reason,
You’ll need to do the following manually:
Put file output/framework.jar in /system/framework/
Put file output/libandroid_runtime.so in /system/lib/ (if this file exists, it shouldn’t if you’re arabizing CM6).
Put file output/libicuuc-arabic.so in /system/lib/
(This is extremely important, failing to place this file will result in a boot loop of your deivce)
If file exists: Place file output/libwebcore.so in /system/lib/
If file exists: Place file output/lib__bcore.so in /system/lib/
Sometimes permissions and xml data doesn’t get updated correctly resulting in corrupted data entries. If you receive a bunch of Force Closes after a reboot, you’ll need to Factory Reset.
Click to expand...
Click to collapse
SOURCE: How To Apply Patch

Change log:
0.907
Updated the webkit patcher to 3.91B (support for more devices).
Click to expand...
Click to collapse
0.906
Updated the webkit patcher to 3.1B (support for more devices).
Reduced size of libicuuc-arabic.so to the bare minimum. This should also help make it have broader device compatibility. (Thank you brightidea)
Click to expand...
Click to collapse
0.904 & 0.905
Updated the webkit patcher to 2.6B (support for more devices).
Fixed errors caused by 0.904 in 0.905. To all who have downloaded 0.904, please download 0.905.
Click to expand...
Click to collapse
0.902
Updated the webkit patcher to 2.3B (support for more devices. e.g. Galaxy I5800).
Click to expand...
Click to collapse
0.901
Updated the webkit patcher to 2.2B.
Reversed the default font to the old one due to its wider compatibility.
Fixed patching JVT rom for the I9000.
Using a cleaned up reworked script and a new libandroid_runtime.so patcher by brightidea.
Click to expand...
Click to collapse
0.813
Updated the webkit patcher to 1.5B.
Updated the default font.
Fixed the “dancing letters” problem in WhatsApp.
Compiled libicuuc-arabic.so with armv5te which should support more devices[/B]
Click to expand...
Click to collapse
0.812
Updated baksmali and smali to version 1.2.8.
Updated the webkit patcher to 0.7B (more devices are supported now)
Click to expand...
Click to collapse
0.811
Updated baksmali and smali to version 1.2.7.
Added the arabic shaping libwebcore patcher by brightidea (v 0.3 Beta)
Renamed folders to facilitate the process for you guys: you only have to pull files and dump them in the input folder. All generated files will be placed in the output folder.
Click to expand...
Click to collapse
0.804
Fixed numbers getting reversed in some cases.
Click to expand...
Click to collapse
0.803
Updated Baksmali and Smali to the latest version.
The clockworkmod recovery file is modified (hopefully will work on more roms now)
Click to expand...
Click to collapse
0.802
Updated the arabization files to include the latest CM7 fixes (Alignment, text width and many more).
Unified Gingerbread and Froyo patches by moving TextUtils.java’s methods into a new class.
Fixed garbled text appearing in Gmail’s titles in some ROMs
Click to expand...
Click to collapse
0.801
Using latest CyanogenMod 7 patch for Arabic. Reference
HTC Gingerbread Sense ROMs will now go through a separate patching process for Layout.smali. This patch has been borrowed from the bright minds that created HebFix_0.91
Click to expand...
Click to collapse
0.800
Space after LAMALEF is fixed.
This is a port of the latest arabic patch for CM7. It should work globally on all devices > 2.1. This is also why support for arabizing CM7 is dropped in this patch.
Scrolling and viewing arabic content should be much faster because the new patch relies on c++ to do this instead of Java
Now patch produces a Clockworkmod recovery file for ease of use
Added an arabic font that facilitates reading Arabic text
Click to expand...
Click to collapse
0.789
Fixed a Force Close in CM7 due to missing Styles.smali
No longer using ICU4J to shape text. This could also possibly fix shaping for Persian text. Instead, we use Aziz Huss’s ArabicShaper class with some modifications of my own.
Click to expand...
Click to collapse
0.788
Fixed a minor Force Close issue in gTalk with Gingerbread Sense UI.
Click to expand...
Click to collapse
0.787
Added patch files for Gingerbread Sense UI.
Removed clockworkmod recovery generated file due to incompatibility with all systems
Click to expand...
Click to collapse
0.786
Added patch files for CyanogenMod 6.
Added patch files for Gingerbread.
Recovery flashable update files are generated alongside the framework.
Click to expand...
Click to collapse
0.785
Added patch files for CyanogenMod 7.
Added libwebcore.so (used to shape text in Browser and Gmail) to subfolder libwebcore. You’ll need to place them in /system/lib on your device.
Click to expand...
Click to collapse
0.784
Space after LAMALEF is back. The previous patch caused problems in some apps.
Fixed the RTL alignment in google talk.
Arabic shaping works correctly in Twitter.
Click to expand...
Click to collapse
0.781
Space after LAMALEF is gone. Strings are resized to accommodate this change.
Change to Y6b’s source code to reflect on these new changes.
ArabicShaper function only shapes requested width instead of the whole string. This should speed things up considerably.
Some corrections to y6b’s source code
Added subfolder “Aljazeera fonts” for those who want to replace their phone’s fonts.
Clicking on commands.exe will not produce all these prompts anymore. Minimized them to save your precious time.
Click to expand...
Click to collapse

Download:
0.907 - http://www.mediafire.com/?ubsh844gjtjcaba
0.906 - http://www.mediafire.com/?4hisiqyjq7n3n1f
0.905 - http://www.multiupload.com/624XH5H7YO
0.902 - http://www.multiupload.com/70TG5L3XIQ
0.901 - http://www.multiupload.com/KZH2N0ASEZ
0.813 - http://www.multiupload.com/2DDS2B35HI
0.812 - http://www.multiupload.com/CULDPEQACA
0.811 - http://www.multiupload.com/Y1EOQYOJ6B
0.804 - http://www.multiupload.com/TUQLR9TQ1M
0.803 - http://www.multiupload.com/JRF6SPOIFS
0.802 - http://www.multiupload.com/OCH233RPK8
0.801 - http://www.multiupload.com/31A9AOAG3A
0.800 - http://www.multiupload.com/ROGWC6G0Q2
0.789 - http://www.multiupload.com/868WFGNER6
0.788 - http://www.multiupload.com/4KXZF81IVB
0.787 - http://www.multiupload.com/P8BYJQEZQ0
0.786 - http://www.multiupload.com/C4J0VJPLX2
0.785 - http://www.multiupload.com/V98TYUHUO1
0.784 - http://www.multiupload.com/BAU681Q6AZ
0.781 - http://www.multiupload.com/RONE05PCE7
0.76 - http://www.multiupload.com/WUUDZK9ITQ
Click to expand...
Click to collapse

Rom's Patches:
Creed's Rom v2.0
Andro-ID 3.3
Chocobread
FITDROID 3.2
FITDROID V3.1
FITDROID V3
Creed's ROM 1.6
Creed's ROM 1.5

hi there
thank you for the patch. it works fine. however the font is err... i don't know, i have difficulties to read it. the markings are a bit off. the space between lines is also too tight so some markings are overlapping
ohh... i'm using MyTouch 4G aka HTC Glacier with EnergyROM

ayamjago said:
hi there
thank you for the patch. it works fine. however the font is err... i don't know, i have difficulties to read it. the markings are a bit off. the space between lines is also too tight so some markings are overlapping
ohh... i'm using MyTouch 4G aka HTC Glacier with EnergyROM
Click to expand...
Click to collapse
there is a sub-folder named fonts,... try to put them on the systems/fonts folder and reboot
backup ur device fonts before replacing them "just in case "

I want to confirm that this method worked on two ROMs for my Samsung Galaxy S2 Epic 4G Touch (for Sprint).
Thanks a lot...

ahmadshawki said:
I want to confirm that this method worked on two ROMs for my Samsung Galaxy S2 Epic 4G Touch (for Sprint).
Thanks a lot...
Click to expand...
Click to collapse
The coder [madmack]:
"This should work with all Android phones supporting Android Froyo or Gingerbread with the exception of MIUI ROMs as they are closed source and I can’t work with that."
Click to expand...
Click to collapse
Enjoy the Arabic Support

Can u make it for Chocobread??

aya.yaya said:
Can u make it for Chocobread??
Click to expand...
Click to collapse
as soon as i go home cuz i have a limited bandwidth here and need to download the rom 1st
or u can just upload the
/system/framework/framework.jar
/system/lib/libwebcore.so
/system/lib/libandroid_runtime.so
and i will make it 4 u

Gendows said:
as soon as i go home cuz i have a limited bandwidth here and need to download the rom 1st
or u can just upload the
/system/framework/framework.jar
/system/lib/libwebcore.so
/system/lib/libandroid_runtime.so
and i will make it 4 u
Click to expand...
Click to collapse
Wow.. very thank you brad...
this is file you need
http://dl.dropbox.com/u/56584844/For_RTL_ChocoBread.rar
waiting 4 it

Thank you! I was searching for this dude..

aya.yaya said:
Wow.. very thank you brad...
this is file you need
http://dl.dropbox.com/u/56584844/For_RTL_ChocoBread.rar
waiting 4 it
Click to expand...
Click to collapse
here is ur patch link,... will add it to the patches list to
sorry for being late
Download

Feras.Rehman said:
Thank you! I was searching for this dude..
Click to expand...
Click to collapse
good to hear that,... now i think that all ur custom roms will support arabic

Thanks 4 patch bro
Sent from my GT-S5670 using xda premium

aya.yaya said:
Thanks 4 patch bro
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
u r welcome,....

I've managed to create the zip file. But, CWM on my HTC (http://forum.xda-developers.com/showthread.php?t=1432259) refused to flash it. It seems there is problem with sign. Would you create signed zip based on my HTC files. Or, would you tell me how to sign the zip?
Actually, the original creator of the custom ROM has created one, but it does not based on the undoscript. His zip is not working after undo script is applied. So the provided files are from custom ROM + undo script.
Thanks

sancho21 said:
I've managed to create the zip file. But, CWM on my HTC (http://forum.xda-developers.com/showthread.php?t=1432259) refused to flash it. It seems there is problem with sign. Would you create signed zip based on my HTC files. Or, would you tell me how to sign the zip?
Actually, the original creator of the custom ROM has created one, but it does not based on the undoscript. His zip is not working after undo script is applied. So the provided files are from custom ROM + undo script.
Thanks
Click to expand...
Click to collapse
ok let's see,... there is a "system" folder in the zip,...
so just open any successful flashing zip that u used an put the folder in that zip
but delete it's content first except the meta inf folder
that all what i do after generating the file

Nice. I'll give a try.
Sent from my HTC Wildfire S A510e using XDA App

Please confirm correctness of these steps:
0. cd /tmp/kerja/ex
1. unzip /tmp/kerja/proven_working.zip
2. rm -Rf system
3. unzip -d /tmp/arabic generated_but_rejected_arabic.zip
4. cp -R /tmp/arabic/system .
5. zip -r result.zip *
Sent from my HTC Wildfire S A510e using XDA App

Coolpad Note 5 Stock Marshmallow ROM Recovery Flashable

Recovery Flashable Stock Marshmallow ROM for CPN5
DOLBY ATMOS Pre-Installed + Bloatwares are Removed :victory:
[ UPDATE ] :-- YouTube Tutorial
Download Links Are Below
Download the ROM zip, Place it on your SD Card and Follow the Instructions to Install:-
Please Take A Nandroid Backup Before ant Modification to your Device. I Am Not responsible for any damage to your device.
1)Boot to recovery. { TWRP Recovery for CPN5 HERE }
2)Go to Wipe and then Advaced Option.
3)Check Dalvik , System, Data & Cache. Now Swipe to Wipe.
4)Go to Home, And Choose Install Option.
5)Now Browse to the location where you places the downloaded zip. Select it and Swipe to Install.
6)Confirm again by Swipe 7 Wait till it gets completed.
If you want to flash other zip files over the ROM. Please do that after the successful first boot..
Enjoy
Credits:-
Telegram Group Members of "CPN5 Development".
Assayed's kitchen
Download HERE
Please Press the Thank Icon.
And Support me. & my group members.
My Telegram ID @itspdp

Reserved for FAQs
Ask below if have any queries...:victory:

Jio Volte??
for indian Users ,does jio work in this Volte working??

manudduke said:
for indian Users ,does jio work in this Volte working??
Click to expand...
Click to collapse
Yes this is bugless rom..
Or you can say.. a ditto copy (in performance) from stock MM rom with some removed bloatwares.

itspdp said:
Yes this is bugless rom..
Or you can say.. a ditto copy (in performance) from stock MM rom with some removed bloatwares.
Click to expand...
Click to collapse
Oh, but for me there is no stock fingerprint app so its not working any help??
Thank you

manudduke said:
Oh, but for me there is no stock fingerprint app so its not working any help??
Thank you
Click to expand...
Click to collapse
Have You tried this ROM ?
Give it a try, if not works.
Then you can also try, using the Fingerprint App available in the .zip file..(browse system/app. Or system/priv-app

manudduke said:
Oh, but for me there is no stock fingerprint app so its not working any help??
Thank you
Click to expand...
Click to collapse
Have You tried this ROM ?
Give it a try, if not works.
Then you can also try, using the Fingerprint App available in the .zip file..(browse system/app. Or system/priv-app)

itspdp said:
Have You tried this ROM ?
Give it a try, if not works.
Then you can also try, using the Fingerprint App available in the .zip file..(browse system/app. Or system/priv-app)
Click to expand...
Click to collapse
Pic attached
Only Fingerprintinfoprovider. apk was found.
If not can please provide me that file

manudduke said:
Pic attached
Only Fingerprintinfoprovider. apk was found.
If not can please provide me that file
Click to expand...
Click to collapse
I'm not sure Manudduke but what I found is that the fingerprint app is actually the part of default settings.apk
One of my friend had the same issue, yesterday he Flashed the Stock MM Rom using YGDP tool, and his fingerprint app issue got solved.
May be this can helps you. :fingers-crossed:
If still will not work, please let me know so I can research something more on these.

itspdp said:
I'm not sure Manudduke but what I found is that the fingerprint app is actually the part of default settings.apk
One of my friend had the same issue, yesterday he Flashed the Stock MM Rom using YGDP tool, and his fingerprint app issue got solved.
May be this can helps you. :fingers-crossed:
If still will not work, please let me know so I can research something more on these.
Click to expand...
Click to collapse
Thank you Bro..
Need a small help please give me the download link for MM stock ROM please

Kindly explain about this ROM
Is it official rom or un official rom?
Is there any changes made compared to Official v25 rom?
Is it bug free and stable?
Is there any modification done in coolui?

To Root
Download and Follow the instructionhttps://drive.google.com/file/d/1Ro9KKtGJ5_K6V0tNLcw7PG9BiZw4zKYD/view?usp=sharing

manudduke said:
Thank you Bro..
Need a small help please give me the download link for MM stock ROM please
Click to expand...
Click to collapse
Sorry bro, was busy...
Here are links...
https://firmwarefile.com/coolpad-note-5-3600i
6.0 025 is Stock MM Rom v25
7.0 is Stock N Rom
MM rom is more stable as i used:good:

itspdp said:
Sorry bro, was busy...
Here are links...
https://firmwarefile.com/coolpad-note-5-3600i
6.0 025 is Stock MM Rom v25
7.0 is Stock N Rom
MM rom is more stable as i used:good:
Click to expand...
Click to collapse
Tried both fingerprint app is gone, I'm on 7.0 anyway thanks bro..

manudduke said:
Tried both fingerprint app is gone, I'm on 7.0 anyway thanks bro..
Click to expand...
Click to collapse
Tell me your whatsapp number... Will ad you in our development group, there you can ask your questions to other members too !!
Personal msg me ?

After flashing, when my phone reboot then my touchscreen not woeking please help

Thank you so much for this bugless rom

Touch screen is not working
After flashing this rom phones touch screen is not working (I am not able select any options by simply taping on it..) please suggest some solutions for this problem..

QuickShare Oneu UI 2.1 Port

hello guys here I share the new One UI 2.1 quickshare fully working this zip is completely done by me if you want to use the files just remember to mention me thanks
Installation:
Unzip the zip and you will find the files and the routes copy and paste the files and give the necessary permissions, restart the mobile and enjoy
downloads:
https://androidfilehost.com/?fid=8889791610682870812
I don't need donations, just click on the button thank you to value the work

What does it do?

physwizz said:
What does it do?
Click to expand...
Click to collapse
allows faster file sharing

Hello bro
Tested on Android 13 Xiaomi device
Not working

elswerky said:
Hello bro
Tested on Android 13 Xiaomi device
Not working
Click to expand...
Click to collapse
works only on samsung bro, sorry

does it work on oneui 1.1?

SM-T230NU - CosaROMv2

Welcome to CosaROM for the Galaxy Tab 4 7.0 (SM-T230NU)
This ROM is stock based and adds some features as well!
note to mods: this is my first ever post on here, so if any changes need to be made, tell me and I will change it!
!!WARNING: THIS ROM WILL WIPE DATA WHEN FLASHED, BE SURE TO BACK THEM UP IF YOU WANT TO HAVE YOUR FILES ECT!!
Added Features:
- Pre-Rooted
- Busybox pre-installed
- Added init.d support
- Zipaligned
- Debloated (Not ALL Samsung and Google apps are removed, V3 will prob have them all samsung apps removed)
- Deodexed
- Adb pre-activated (Incase your device's screen is broken, this can be maybe useful)
- build.prop tweaks
!Note:
- I know this tablet is pretty much OUTDATED but I just felt like sharing this small stock based rom for the small amount of people still using this device.
- I also know that there are better rom than this but it's the best I could now for now.
- You can install the ROM by 2 methods
1. Odin ==> .tar file (TWRP INCLUDED, NOT DONE YET, PROBLEM WITH SYSTEM.IMG)
2. Recovery ==> .zip file
- This rom is stock based and is made to be the most reliable possible.
- FIRMWARE INFOS:
T230NUUEU0APA1
Credits:
- Chainfire ==> SuperSU

If anyone knows how to compile a custom kernel directly into the rom .zip file, I would really like to know how! thanks!

Congrats bro on your ROM i have yet to get mine updated lol i have just been way too busy with personal life. Its always nice to see developers still make roms for this tablet even if they are stock based. Wish you the best with your ROM
PS you can pm anytime for help i may not always be here to help but i will try

Thj said:
Welcome to CosaROM for the Galaxy Tab 4 7.0 (SM-T230NU)
This ROM is stock based and adds some features as well!
note to mods: this is my first ever post on here, so if any changes need to be made, tell me and I will change it!
!!WARNING: THIS ROM WILL WIPE DATA WHEN FLASHED, BE SURE TO BACK THEM UP IF YOU WANT TO HAVE YOUR FILES ECT!!
Added Features:
- Pre-Rooted
- Busybox pre-installed
- Added init.d support
- Zipaligned
- Debloated (Not ALL Samsung and Google apps are removed, V3 will prob have them all samsung apps removed)
- Deodexed
- Adb pre-activated (Incase your device's screen is broken, this can be maybe useful)
- build.prop tweaks
!Note:
- I know this tablet is pretty much OUTDATED but I just felt like sharing this small stock based rom for the small amount of people still using this device.
- I also know that there are better rom than this but it's the best I could now for now.
- You can install the ROM by 2 methods
1. Odin ==> .tar file (TWRP INCLUDED, NOT DONE YET, PROBLEM WITH SYSTEM.IMG)
2. Recovery ==> .zip file
- This rom is stock based and is made to be the most reliable possible.
- FIRMWARE INFOS:
T230NUUEU0APA1
Credits:
- Chainfire ==> SuperSU
Click to expand...
Click to collapse
ANDROID VERSION? 4.4.2 or 5.0.0

I have a few days testing your rom, it works very well, if you need a tester write to me

4.4.2

Lem0nn said:
ANDROID VERSION? 4.4.2 or 5.0.0
Click to expand...
Click to collapse
4.4.2

I had forgot about this post haha! thx for reminding me of it

Picked up one of these at the flea market for $20 on impulse, thanks for this rom. I'm also available for testing, not planning to do much with it otherwise.

Works great !

Thj said:
Welcome to CosaROM for the Galaxy Tab 4 7.0 (SM-T230NU)
This ROM is stock based and adds some features as well!
note to mods: this is my first ever post on here, so if any changes need to be made, tell me and I will change it!
!!WARNING: THIS ROM WILL WIPE DATA WHEN FLASHED, BE SURE TO BACK THEM UP IF YOU WANT TO HAVE YOUR FILES ECT!!
Added Features:
- Pre-Rooted
- Busybox pre-installed
- Added init.d support
- Zipaligned
- Debloated (Not ALL Samsung and Google apps are removed, V3 will prob have them all samsung apps removed)
- Deodexed
- Adb pre-activated (Incase your device's screen is broken, this can be maybe useful)
- build.prop tweaks
!Note:
- I know this tablet is pretty much OUTDATED but I just felt like sharing this small stock based rom for the small amount of people still using this device.
- I also know that there are better rom than this but it's the best I could now for now.
- You can install the ROM by 2 methods
1. Odin ==> .tar file (TWRP INCLUDED, NOT DONE YET, PROBLEM WITH SYSTEM.IMG)
2. Recovery ==> .zip file
- This rom is stock based and is made to be the most reliable possible.
- FIRMWARE INFOS:
T230NUUEU0APA1
Credits:
- Chainfire ==> SuperSU
Click to expand...
Click to collapse
Hello, will the Odin .tar flashable version be available? I cant boot into twrp because my home button in broken.

fitrockx said:
Hello, will the Odin .tar flashable version be available? I cant boot into twrp because my home button in
Click to expand...
Click to collapse

fitrockx said:
Hello, will the Odin .tar flashable version be available? I cant boot into twrp because my home button in broken.
Click to expand...
Click to collapse
I will try making one tommorow!

Thj said:
I will try making one tommorow!
Click to expand...
Click to collapse
Much appreciated. I thought this was already dead. 🥹

fitrockx said:
Much appreciated. I thought this was already dead. 🥹
Click to expand...
Click to collapse
Hey! Sorry for the late answer. The odin flashable image should be coming really soon! I just had problems trying to find ASSAYYED to continue it. now I have to use CRB lmao.

Thj said:
Hey! Sorry for the late answer. The odin flashable image should be coming really soon! I just had problems trying to find ASSAYYED to continue it. now I have to use CRB lmao.
Click to expand...
Click to collapse
fitrockx said:
Much appreciated. I thought this was already dead. 🥹
Click to expand...
Click to collapse
There it is. This is the first test and I do not know if it will work first try! If you want to try it, go ahead, I dont have my device rn so I cant test it myself.
LINK: https://www.mediafire.com/file/t20m...in-tar-flashable-beta-20230202_28bit.tar/file
Tell me if it does not work. And also tell me what happens if it does not work.

Hi, i was porting Tab4 rom for Tab2, only want to ask is that possible? i would like to use this as my port rom and CM as my base,i tryed tab3 but i got some media d1ed....

An2rejKK said:
Hi, i was porting Tab4 rom for Tab2, only want to ask is that possible? i would like to use this as my port rom and CM as my base,i tryed tab3 but i got some media d1ed....
Click to expand...
Click to collapse
it would *maybe* be possible. It would take ALOT of work but maybe

Thj said:
it would *maybe* be possible. It would take ALOT of work but maybe
Click to expand...
Click to collapse
ok, i wil start now, i try to port tab 3 kk to tab 2 but is got stuck at bootanimation... if you want i can share a link to you

I just turned on this tablet for the first time in years. Nice to see someone still messing around with it. I'm using a rom made years ago (pixel rom). I will try your new rom soon after I do a backup in twrp. The rom I'm on now has no Samsung apps, hence the reason for the backup lol. Anyways, will update soon with a review.

Development ScamSuck 1.0

There is ScamSuck 1.0 firstly made for a52s but now for A52 4G​SUPPPORTED PHONES
A525F
FEATURES!​BASED ON SEPTEMBER UPDATE A525FxxS4BVI2​DEBLOATED FROM GOOGLE​DEBLOATED FROM SAMSUNG S*TS​S20 WALLPAPERS​RINGTONES FROM ANY PHONES MAYBE​
DOWNLOAD!!
SCAMSUCK 1.0​Kernel source: Samsung Open Source
BUGS!​YOU TELL ME^^​
HOW TO INSTALL
USE TWRP AND FROM INSTALL PAGE SELECT INSTALL IMG AND FLASH SCAMSUCK​

can you share some screenshots

tridi001 said:
can you share some screenshots
Click to expand...
Click to collapse
This is stock Rom but debloated

Reserved. My mistake. i add wallpaper from s20

Can you upload a screenshot of the rom

Thanks you very much!! for create a clean ROM STOCK

when flashing it gives me an error

What makes this rom better than rayos?

Ryzen5950XT said:
What makes this rom better than rayos?
Click to expand...
Click to collapse
Idk. Stock