Related
Hi,
I backed up my phone with Titanium and after updating to 4.0.3 tried to restore data only, from that moment - messaging force closing.
what can I do ?
thanks
Clear any messaging related data, reboot, and then see what happens.
Thanks but it's the same - the app loads and than crashes immediately,
Can I re-download the apk somewhere ?
I know it's core element - but maybe it can be extracted from the whole update ?
Well just to reiterate make sure you wipe all relevant system apps in titanium as that should do it (just want to be sure ).
But you could reflash the rom again, or part of the rom.
And yes you could pull the apps from the rom and install them without reflashing (though you will have to use titanium to make it a system app probably).
Oh yeah you could try wiping the dalvik cache.
tried wiping the dalvik cache did not help. how can I flash only the messaging app ?
Shakty1 said:
tried wiping the dalvik cache did not help. how can I flash only the messaging app ?
Click to expand...
Click to collapse
Well I haven't done such a thing for a while but when I did a similar thing I did it like this:
1. Get full rom zip
2. Open zip with 7-Zip (or similar program).
3. Delete anything you don't want to be flashed again (I guess in your case nearly everything)
4. Flash
Note: I said open the zip, not extract it.
Can't guarantee this will work though I would personally just do a full wipe, flash the whole rom again, and be careful what you restore (i.e. don't restore system data).
Never use Ti to restore data after changing roms. It's the first rule of Flash Club.
Hello,
I will really appreciate if you can help to understand few basic issues:
1) When rooting the phone, is the boot-loader must be unlocked? i.e., if I've rooted the phone successfully using some 3rd party utility, it means that the boot-loader was unlocked during the rooting process or it was unlocked in advanced?
2) If the answer to the first question is "yes" (i.e. bootloader must be unlocked before rooting), how it is possible that my data wasn't wiped after rooting? This means that the boot-loader was unlocked in advance? Or maybe the 3rd party application backed up the data before unlocking the boot-loader and than restored it?
3) I heard that in order to install SU, the stock-recovery must be changed to a custom one. Is it necessarily true?
4) How can I check which recovery is installed on the phone?
5) If the recovery is changed to a custom one, does it mean that I stop receive OTA?
6) Can I backup up the stock recovery before changing it? Or how can I know which one it is to search on the net?
7) Do applications, like Titanium, change the recovery upon installation?
8) How applications, like Titanium, move apps, that are not supposed to move in regular installation,from ROM to SD? Can it harm the performance of the app?
9) When deleting apps from ROM (System or Data) manually, do I need to delete other files or folders besides .apk files in system/app or data/app? Is there any cache or other data to delete?
10) Do I need (or should I in case of lack of space) clean some cache files from ROM? (Like Dalvik or others...) If yes, which ones and how?
Sorry for the long post, but It will really help me to understand all these issues, once and for all.
Thank you in advance!
yuri_feigin said:
Hello,
I will really appreciate if you can help to understand few basic issues:
1) When rooting the phone, is the boot-loader must be unlocked? i.e., if I've rooted the phone successfully using some 3rd party utility, it means that the boot-loader was unlocked during the rooting process or it was unlocked in advanced?
2) If the answer to the first question is "yes" (i.e. bootloader must be unlocked before rooting), how it is possible that my data wasn't wiped after rooting? This means that the boot-loader was unlocked in advance? Or maybe the 3rd party application backed up the data before unlocking the boot-loader and than restored it?
3) I heard that in order to install SU, the stock-recovery must be changed to a custom one. Is it necessarily true?
4) How can I check which recovery is installed on the phone?
5) If the recovery is changed to a custom one, does it mean that I stop receive OTA?
6) Can I backup up the stock recovery before changing it? Or how can I know which one it is to search on the net?
7) Do applications, like Titanium, change the recovery upon installation?
8) How applications, like Titanium, move apps, that are not supposed to move in regular installation,from ROM to SD? Can it harm the performance of the app?
9) When deleting apps from ROM (System or Data) manually, do I need to delete other files or folders besides .apk files in system/app or data/app? Is there any cache or other data to delete?
10) Do I need (or should I in case of lack of space) clean some cache files from ROM? (Like Dalvik or others...) If yes, which ones and how?
Sorry for the long post, but It will really help me to understand all these issues, once and for all.
Thank you in advance!
Click to expand...
Click to collapse
Im sorry but Ive already answered all of these questions and one in fact could take a good couple paragraphs to explain.
Maybe tonight I'll answer or you could check out xda university.
yuri_feigin said:
Hello,
I will really appreciate if you can help to understand few basic issues:
1) When rooting the phone, is the boot-loader must be unlocked? i.e., if I've rooted the phone successfully using some 3rd party utility, it means that the boot-loader was unlocked during the rooting process or it was unlocked in advanced?
2) If the answer to the first question is "yes" (i.e. bootloader must be unlocked before rooting), how it is possible that my data wasn't wiped after rooting? This means that the boot-loader was unlocked in advance? Or maybe the 3rd party application backed up the data before unlocking the boot-loader and than restored it?
3) I heard that in order to install SU, the stock-recovery must be changed to a custom one. Is it necessarily true?
4) How can I check which recovery is installed on the phone?
5) If the recovery is changed to a custom one, does it mean that I stop receive OTA?
6) Can I backup up the stock recovery before changing it? Or how can I know which one it is to search on the net?
7) Do applications, like Titanium, change the recovery upon installation?
8) How applications, like Titanium, move apps, that are not supposed to move in regular installation,from ROM to SD? Can it harm the performance of the app?
9) When deleting apps from ROM (System or Data) manually, do I need to delete other files or folders besides .apk files in system/app or data/app? Is there any cache or other data to delete?
10) Do I need (or should I in case of lack of space) clean some cache files from ROM? (Like Dalvik or others...) If yes, which ones and how?
Sorry for the long post, but It will really help me to understand all these issues, once and for all.
Thank you in advance!
Click to expand...
Click to collapse
1) To my knowledge, yep. (Not much experience with locked bootloaders, sorry!)
2) But then again, different phones have different bootloaders, they might work In different ways.
3) Nope. Most (if not all) root tools install SU without custom recovery.
4) when your phone is powered-off, press Vol up, home and power button (this depends on your phone, this is Samsung standard, what phone are u using?
5) Go to download mode, (Vol down, home and power button, again Samsung standard) and check if: System Status: Official. If yes, OTAs can be taken. If System Status: Custom, you cant take OTAs.
6) U most probably can. Use Online Nandroid Backup, free from Google play store, and backup recovery only. That should work.
7) No.
8) Depends on the app.
9) Again, depends on the app.
10) Cache and dalvik cache can be wiped from recovery. The custom recovery will do it for u. Wiping dalvik cache from recovery won't be useful, as it recreates itself on reboot.
No problem with the long post, always glad to help
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.
Thank You
Lgrootnoob said:
Im sorry but Ive already answered all of these questions and one in fact could take a good couple paragraphs to explain.
Maybe tonight I'll answer or you could check out xda university.
Click to expand...
Click to collapse
I would really appreciate if you could answer, or refer me to the correct paragraph in XDA university or give a me a link to your previous answers.
Thank you very much.
Irwenzhao said:
1) To my knowledge, yep. (Not much experience with locked bootloaders, sorry!)
2) But then again, different phones have different bootloaders, they might work In different ways.
3) Nope. Most (if not all) root tools install SU without custom recovery.
4) when your phone is powered-off, press Vol up, home and power button (this depends on your phone, this is Samsung standard, what phone are u using?
5) Go to download mode, (Vol down, home and power button, again Samsung standard) and check if: System Status: Official. If yes, OTAs can be taken. If System Status: Custom, you cant take OTAs.
6) U most probably can. Use Online Nandroid Backup, free from Google play store, and backup recovery only. That should work.
7) No.
8) Depends on the app.
9) Again, depends on the app.
10) Cache and dalvik cache can be wiped from recovery. The custom recovery will do it for u. Wiping dalvik cache from recovery won't be useful, as it recreates itself on reboot.
No problem with the long post, always glad to help
Smack that thanks button if I helped!
Note 2 LTE powered by Illusion ROM and Plasma Kernel.
Sent from dat small country called Singapore.
Click to expand...
Click to collapse
Thank You for your help.
Regarding the last issue: if I wipe the cache, something bad can happen to the applications ot their data? I mean, should I do it only when flashi rom or is it healthy to do it in a while in order to clean unnecessary files?
yuri_feigin said:
Thank You for your help.
Regarding the last issue: if I wipe the cache, something bad can happen to the applications ot their data? I mean, should I do it only when flashi rom or is it healthy to do it in a while in order to clean unnecessary files?
Click to expand...
Click to collapse
The cache is actually a temporary section of the disk that does not contain any application cachery but things along the lines of software upgrade files. It is only wiped merely to make sure there is space for other mod's temp storage.
The data partition contains the data for yourr applications and the 'cache' as you see in settings for apps is for imagery and stuff so regardless if that is removed it wont matter.
The dalvik cache is compiled bytecode for the dalvik vm for each app. (Look up Java vm to get an idea of what I mean and then look up odexing and deodexing on xda university)
Here is some info on the thread http://forum.xda-developers.com/showthread.php?p=48151745#post48151745
Lgrootnoob said:
The cache is actually a temporary section of the disk that does not contain any application cachery but things along the lines of software upgrade files. It is only wiped merely to make sure there is space for other mod's temp storage.
The data partition contains the data for yourr applications and the 'cache' as you see in settings for apps is for imagery and stuff so regardless if that is removed it wont matter.
The dalvik cache is compiled bytecode for the dalvik vm for each app. (Look up Java vm to get an idea of what I mean and then look up odexing and deodexing on xda university)
Here is some info on the thread http://forum.xda-developers.com/showthread.php?p=48151745#post48151745
Click to expand...
Click to collapse
Thanks a lot!
I have few more questions, please:
1) So what will be the best way to clear the cache partition? Only from recovery? Even from stock recovery?
Is there any other way, like a feature in some application or can I delete it manually?
2) Regarding the data partition, I guess I can go each application and clear its cache and/or data from application manager... Is there a better way? By away, if I delete the data of application (not the cache), I loose all the configuration and personal data. What I mean by "cleaning" is to erase some false data that remained by mistake, not to remove the necessary data of the apps. It is especially important for apps installed on ROM. What will be the best way?
3) Is sometimes remains unnecessary junk data in Dalvik Cache? If yes, how to remove it? (not the all Dalvik Cache)?
4) By away, what is the best way to check whether my bootloader is unlocked and to check which recovery is installed? (custom/stock)
5) If I want to mess with the start-up task manager, using some ROM application - what are the "receivers" that are connected to the apps? what is the difference between disabling an app/task/service and disabling receivers?
6) What is the difference between recovery boot mode and bootloader boot mode? When do I need to use the bootloader mode?
6) And another question, with your permission, is what kind of backups are exist beside nandroid? ADB is a backup? Do they back up all the ROM? I guess I will need a custom recovery to restore those backups.
yuri_feigin said:
Thanks a lot!
I have few more questions, please:
1) So what will be the best way to clear the cache partition? Only from recovery? Even from stock recovery?
Is there any other way, like a feature in some application or can I delete it manually?
2) Regarding the data partition, I guess I can go each application and clear its cache and/or data from application manager... Is there a better way? By away, if I delete the data of application (not the cache), I loose all the configuration and personal data. What I mean by "cleaning" is to erase some false data that remained by mistake, not to remove the necessary data of the apps. It is especially important for apps installed on ROM. What will be the best way?
3) Is sometimes remains unnecessary junk data in Dalvik Cache? If yes, how to remove it? (not the all Dalvik Cache)?
4) By away, what is the best way to check whether my bootloader is unlocked and to check which recovery is installed? (custom/stock)
5) If I want to mess with the start-up task manager, using some ROM application - what are the "receivers" that are connected to the apps? what is the difference between disabling an app/task/service and disabling receivers?
6) What is the difference between recovery boot mode and bootloader boot mode? When do I need to use the bootloader mode?
7) And another question, with your permission, is what kind of backups are exist beside nandroid? ADB is a backup? Do they back up all the ROM? I guess I will need a custom recovery to restore those backups.
Click to expand...
Click to collapse
1: Only recovery.
2: "Cleaning" is not possible So the application manager is the only way and yes it would basically reset an application if you delete its data.
3: Its not necessary but can save space for more apps to be installed if you have removed apps manually or with titanium backup. However if you have uninstalled with the app manager in the settings app then the dex files in the dalvik cache are automatically removed. "Unnecessary junk", I have exactly what you are looking for: use Titanium backup's feature in the menu to remove unsused dalvik cache elements and integrate system dalvik into rom. (In the same section when you press the menu button)
4: What phone? (This is neccessary because of the variation in phones.)
5: The only legitimate way of stopping tasks is to disable the intent of the task(I think that is the reciever ). To do this you could use Autostarts from the Play store or you could use the Bootmanager Xposed module. Don't use any task manager unless you want problems. Disabling an app in settings would actually completely freeze the application meaning you could also not start it manually and it wouldnt be started at boot.
6: The bootloader loads recovery or Android. The bootloader is usable depending on the features given by your phone manufacturer. You would know the difference when you use recovery and if you have a Nexus device when you are in bootloader mode. Samsung devices have Download mode which is technically part of the bootloader and allows you to load custom software such as recovery, data partition, system partition etc.
7: You will use recovery to backup/restore.(I don't think that there is any other way because you are using the data that you are backing up or restoring if you didi it while you were running android. Adb cannot backup either but you could pull a recovery backup with adb from the sd card. Adb has a sideload feature for loading software in recovery with your computer. Again I need your phone model.
It seems you seek info on recovery and backing up, This will help a lot: http://xda-university.com/as-a-user/android-dictionary Specifically the Nandroid and Recovery section.
I will be more than happy to expand on any of these topics.
@yuri_feigin
I revised my answer to better suit what you were asking.
Are you still with me?
Updated: 03/24/2015
Hi all,
I did this mostly for practice but I thought it might be helpful so I went ahead and posted.
Stock LG D850 20f ROM
[*]Rooted/SuperSu
[*]Most bloat removed
[*]Oversharpening fix
[*]Flashable zip
[*]init.d support*
[*]CarrierIQ Remover*
*Init.d support is implemented in ROM only, not the kernel. CarrierIQ is removed automatically after first boot via an init script. Say thanks to @skeevydude for his help in getting this done. I shouldn't say "help", he pretty much did it!
Installation
Flash the Lollipop modem - see @autoprime 's thread here for modem zip
Flash the ROM zip
Wipe cache and dalvik (and in some cases data) if coming from a different ROM
Download
v3* - https://www.androidfilehost.com/?fid=95916177934548695
[QRCODE]https://www.androidfilehost.com/?fid=95916177934548695[/QRCODE]
*No change at all to the ROM itself since v2, I just realized that I've been forgetting to zero out the free space on the image file before uploading, which saves about 600 MB when zipped. New flashable zip is about 1.1 GB instead of 1.7 GB.
Older versions:
v1 - https://www.androidfilehost.com/?fid=95916177934543883
Apps Removed
/system/app:
Google Books
Google Chrome
Google Cloud Print
Google Drive
Facebook
Hangouts
Google Newsstand
Google Play Games
Google Play Music
Google Play Movies and TV
Google Plus
Twitter
/system/priv-app:
ATT Address Book
ATT Caller Name ID
ATT DriveMode
ATT Games
ATT Locker
ATT Lookout
ATT Mobile Locate
ATT Remote Support
ATT Smart Wifi
ATT Mobile TV
ISIS Wallet
ATT Visual Voicemail
MLT (LG tracker)
/system/vendor/app:
Amazon Kindle
ATT Family Map
ATT Home
ATT Keeper
ATT MHS Launcher
ATT Navigator
Uber
DeviceHelp
myATT
YP Mobile
ATT Apps
In case you want some of the ATT apps back, I have uploaded a zip here with those apps. This is NOT a flashable zip. You have a couple of options:
1. You may be able to install these as a normal (user) app by just pulling out the apk and installing the usual way.
2. If that doesn't work as expected, copy the app folder from the zip into the appropriate system folder as listed in the "Apps Removed" section.
Download: ATT Apps
Xposed Info
cmulk said:
Xposed has a couple of bad side effects at this point, so before doing anything you need to use Titanium or something similar to Freeze (this basically what the "helper" does):
LGSmartCover
Weather
Weather Theme
WeatherPlatform
Then you can install xposed as in the thread here: http://forum.xda-developers.com/showthread.php?t=3034811
However, there is still one more bug to keep in mind: Xposed will crash the Tethering and Networks menu. There is no fix for that yet, but as a workaround you can download some apps from the play store (like Mobile Network Settings), to shortcut around the menu that force closes.
Click to expand...
Click to collapse
Credits
@autoprime - Flashable zips, bump'd boot.img, and very clear instructions in his thread here
@timmytim - uploading the lollipop stock images (although I know a lot of others were working on that too)
@Skin1980 - Oversharpening fix
@skeevydude - init.d support and carrierIQ remover
CarrierIQ Removal
CarrierIQ has now been removed!
The removal is done via an init script that runs at boot to disable the IQ service before removing the files in order to prevent a force close. However, if you have to wipe data/factory reset without re-flashing the ROM, you will get a force close on the first boot. The good news is that I've tested this scenario and it should fix itself if you just wait about 20 seconds. In other words, the mentioned script does it's thing to stop the service to fix the force close and you are good to go after that.
Old info below:
cmulk said:
On the 20f lollipop rom (either mine or stock, there's no difference) either freezing LADDM or removing the libraries and LADDM as you mention will cause a force close unless you disable the "IQService" first, which is built into the framework-res.apk. I have repeated it multiple times and it has been discussed quite a bit in the Lounge and other threads. Disabling the service is easy for users to do with the "DisableService" app, and then you can remove LADDM and the libraries as mentioned. The difficulty is that disabling a service is a user setting, so, for example, if I reflash my ROM without the IQ files onto a phone with clean /data, I will again get the force close and an unusable ROM.
Click to expand...
Click to collapse
Manual Steps
In the meantime, here is how users can manually disable CarrierIQ. I take no credit for this method, it is posted in several places by several people, I'm just putting it here for convenience:
YOU MUST DO THIS IN ORDER (or at least the first few steps)
1. Download the "DisableService" app from the play store
2. In the DisableService app, go to System -> Android System and disable the "IQService" service
3. Use a root explorer to delete the folder /system/app/LADDM
4. Use a root explorer to delete /system/lib/libiq_client.so and /system/lib/libiq_service.so
5. (Optional) Uninstall DisableService
Remember, disabling the service is a user setting, so if you need to wipe /data for some reason, you will need to re-flash the ROM (which has the CarrierIQ files included) or else you will get a constant force close when your phone boots.
I'll give it a try, thanks
Flashing now. Will report.
I will be watching this ROM. Thanks for posting.
Exactly what does " if coming from a different ROM" mean? I'm on 4.4.2 10f Wulf (stock - rooted) ROM
JeffDC said:
I will be watching this ROM. Thanks for posting.
Exactly what does " if coming from a different ROM" mean? I'm on 4.4.2 10f Wulf (stock - rooted) ROM
Click to expand...
Click to collapse
Just clean flash to save yourself a hassle
2SHAYNEZ
Thanks for your work. I wish I had some skill in this realm. It'd be nice to pick and choose which apps you wanted removed. I prefer the stock ATT Visual Voicemail app over the one in the Play Store as its more reliable. I also use some of the Google Apps that are removed here as well. But great job in getting something debloated out there.
Sent from my LG-D850 using Tapatalk
Flashing lollipop Issues
Thanks for your work.... When flashing the 2 lollipop roms, 9 out of 10 times I get just a screen with icons, no wallpaper, no notification pull down no buttons at the bottom. I flash the modem the rom then SU and clear cache. I have only got the other ROM to flash successfully once. The same is going on with this ROM, is this happening to anyone else. I flashed it 5 times with the same results, would anyone know why this is happening, seems others dont have this issue. Thank you again for bringing us a debloated Lollipop rom.
shayneflashindaily said:
Just clean flash to save yourself a hassle
2SHAYNEZ
Click to expand...
Click to collapse
Here is what I understand for a clean flash:
"1. Boot into Recovery
2. Make a Nandroid backup
3. Wipe data/factory reset
4. Wipe cache partition
5. Wipe Dalvik Cache
6. Flash ROM
7. DO NOT REBOOT – STAY IN RECOVERY
8. Select backup and restore
9. Select advanced restore
10. Select the Nandroid backup you made above
11. Select Restore data
12. Select Yes – Restore data
13. WAIT!
14. REBOOT"
What I do not understand is step 8, which selects the backup made in step two... and then flashing the backup over the (new) ROM flash in step 6. Wouldn't that overwrite the new ROM you just flashed?
JeffDC said:
Here is what I understand for a clean flash:
"1. Boot into Recovery
2. Make a Nandroid backup
3. Wipe data/factory reset
4. Wipe cache partition
5. Wipe Dalvik Cache
6. Flash ROM
7. DO NOT REBOOT – STAY IN RECOVERY
8. Select backup and restore
9. Select advanced restore
10. Select the Nandroid backup you made above
11. Select Restore data
12. Select Yes – Restore data
13. WAIT!
14. REBOOT"
What I do not understand is step 8, which selects the backup made in step two... and then flashing the backup over the (new) ROM flash in step 6. Wouldn't that overwrite the new ROM you just flashed?
Click to expand...
Click to collapse
I always do a clean flash.. dont need to back up and restore and still get bad results.
louvass said:
I always do a clean flash.. dont need to back up and restore and still get bad results.
Click to expand...
Click to collapse
That's not encouraging.
louvass said:
Thanks for your work.... When flashing the 2 lollipop roms, 9 out of 10 times I get just a screen with icons, no wallpaper, no notification pull down no buttons at the bottom. I flash the modem the rom then SU and clear cache. I have only got the other ROM to flash successfully once. The same is going on with this ROM, is this happening to anyone else. I flashed it 5 times with the same results, would anyone know why this is happening, seems others dont have this issue. Thank you again for bringing us a debloated Lollipop rom.
Click to expand...
Click to collapse
I have not seen that issue, but in case you are not clearing data you may need to try clearing dalvik cache.
Also, (and this is just a shot in the dark) you could try formatting system before doing anything else just in case something strange is left behind there.
JeffDC said:
That's not encouraging.
Click to expand...
Click to collapse
You can try dirty flashing first without losing any of your data.
1. Back up your current Boot and System
2. Back up your current modem (if you're coming from the Kitkat modem), or just download a flashable KK modem already posted on XDA
3. Flash the modem and ROM in this post
4. Wipe cache and dalvik
5. See if it works
If it's not working, then you will need to restore your boot, system, and modem to go back to your original kitkat setup without losing data.
Otherwise, you'll have to backup with Titanium and do a clean flash (wipe data) as already mentioned. Using Titanium makes clean flashing not so bad
I do clear Wipe cache and dalvik I wipe everything and it boots back into a desktop and thats it no notification, the same thing happened with the first lollipop.. but after 10 flashes it finally took... so I thought Id try your de-bloated and the same thing is happening again, not sure why this is. I can jump back to kk after flashing the modem without issues. Thank you again for your work.
Pdj7969 said:
Thanks for your work. I wish I had some skill in this realm. It'd be nice to pick and choose which apps you wanted removed. I prefer the stock ATT Visual Voicemail app over the one in the Play Store as its more reliable. I also use some of the Google Apps that are removed here as well. But great job in getting something debloated out there.
Click to expand...
Click to collapse
I agree that I use most or all of these Google apps as well. However, they update so often anyway that I prefer to just have them as user apps (otherwise you end up with 2 copies - the old static version in the system apps folder, and the updated version in the user apps folder).
As for the visual voicemail, I have posted the ATT apps in a zip in the OP. Visual voicemail is in the VVM_ATT folder.
Thanks!
cmulk,
Would you please clarify post 5 and 9 questions?
JeffDC said:
cmulk,
Would you please clarify post 5 and 9 questions?
Click to expand...
Click to collapse
Sure thing! That's actually what I meant to do in post 13. I am not sure if you can flash over 10f without wiping data, but you could give it a try without losing anything (except time) if you look at post 13.
You should clear cache and dalvik mostly any time you are flashing, unless you are just flashing over another stock 20f ROM.
louvass said:
I do clear Wipe cache and dalvik I wipe everything and it boots back into a desktop and thats it no notification, the same thing happened with the first lollipop.. but after 10 flashes it finally took... so I thought Id try your de-bloated and the same thing is happening again, not sure why this is. I can jump back to kk after flashing the modem without issues. Thank you again for your work.
Click to expand...
Click to collapse
Have you tried formatting /system before doing anything else? I'm not sure that will make any difference, but just for process of elimination at least
cmulk said:
Have you tried formatting /system before doing anything else? I'm not sure that will make any difference, but just for process of elimination at least
Click to expand...
Click to collapse
Thanks I do clear everything but my external mem.
Ever since flashing this I'm getting "no sd card" messages every time I try to download anything ( I don't have an external sd card) but it's never been a problem before. I've restored a backup of my stock Tim and the problem followed me after full wipes.
Hi,
I recently flashed OpenGapps nano and it came with google wallpaper (com.google.android.apps.wallpaper) and have been trying to uninstall it using (Amaze file manager) and still can't find where it's located as I've cleaned out my phone from useless apps and this is the last one. I've deleted the apk and app id folder, only ones I could find in the folders (yet the app still shows up in my apps list) which seems like I haven't deleted it yet.
Usernameaffair said:
Hi,
I recently flashed OpenGapps nano and it came with google wallpaper (com.google.android.apps.wallpaper) and have been trying to uninstall it using (Amaze file manager) and still can't find where it's located as I've cleaned out my phone from useless apps and this is the last one. I've deleted the apk and app id folder, only ones I could find in the folders (yet the app still shows up in my apps list) which seems like I haven't deleted it yet.
Click to expand...
Click to collapse
You probably didn't know this but when you uninstall system apps you have to boot to recovery and wipe cache and wipe Dalvik/ART cache(do not factory reset, only wipe caches). After wiping, reboot to system, it will take some time for the device to boot like it does when you flash a ROM because the device has to reload all your apps and has to reload data into cache from the apps that you still have.
The reason that it still shows up like it's still there is because the device still has cached data from that app. It will be gone from your app drawer after you do the wipes.
This also has to be done when adding apps to system to make them system apps, if you dont wipe cache it won't recognize the app as a system app, this confuses the system because it can't find the app in its last known location on the device. Wiping cache allows the system to reload the app, app data and cached data as a system app.
Failing to wipe cache after adding/removing system apps is certain to cause issues.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
You probably didn't know this but when you uninstall system apps you have to boot to recovery and wipe cache and wipe Dalvik/ART cache(do not factory reset, only wipe caches). After wiping, reboot to system, it will take some time for the device to boot like it does when you flash a ROM because the device has to reload all your apps and has to reload data into cache from the apps that you still have.
The reason that it still shows up like it's still there is because the device still has cached data from that app. It will be gone from your app drawer after you do the wipes.
This also has to be done when adding apps to system to make them system apps, if you dont wipe cache it won't recognize the app as a system app, this confuses the system because it can't find the app in its last known location on the device. Wiping cache allows the system to reload the app, app data and cached data as a system app.
Failing to wipe cache after adding/removing system apps is certain to cause issues.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Just have a quick question, are the default dialer/messenging apps system apps? That came with my rom? Because I want to replace the default dialer with https://play.google.com/store/apps/details?id=com.google.android.dialer&hl=en, making this the default app and uninstalling the default one. Would I need to make it a system app?
Usernameaffair said:
Just have a quick question, are the default dialer/messenging apps system apps? That came with my rom? Because I want to replace the default dialer with https://play.google.com/store/apps/details?id=com.google.android.dialer&hl=en, making this the default app and uninstalling the default one. Would I need to make it a system app?
Click to expand...
Click to collapse
Yes, you need to push the chosen apps to system and either disable or uninstall the existing apps.
Again, after you get the new apps installed and pushed to system, reboot the device and let it load with the new apps, open the new apps, get them setup and configured to work. Then delete/uninstall the replaced apps, then reboot to recovery and wipe cache and dalvik/ART cache.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Droidriven said:
Yes, you need to push the chosen apps to system and either disable or uninstall the existing apps.
Again, after you get the new apps installed and pushed to system, reboot the device and let it load with the new apps, open the new apps, get them setup and configured to work. Then delete/uninstall the replaced apps, then reboot to recovery and wipe cache and dalvik/ART cache.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Click to expand...
Click to collapse
Thanks. So I followed this adb tutorial on moving a app to /system/app/. And it seems to be a system app now(no uninstall option in app drawer), but don't I need to give it permissions (read/write) or something along those lines??
Code:
adb remount
adb shell
su
cd /data/app/
found the app id
then using the mv "mv app id /system/app/"
and rebooted
Usernameaffair said:
Thanks. So I followed this adb tutorial on moving a app to /system/app/. And it seems to be a system app now(no uninstall option in app drawer), but don't I need to give it permissions (read/write) or something along those lines??
Code:
adb remount
adb shell
su
cd /data/app/
found the app id
then using the mv "mv app id /system/app/"
and rebooted
Click to expand...
Click to collapse
Yes, if you used adb you have to give it permissions as a system app.
adb shell chmod 644 /system/app/(name of apk file)
Or
adb shell chmod 644 /system/app/(folder for app)/(name of app)
Or
adb shell chmod 644 /system/priv-app/(name of apk file)
Or
adb shell chmod 644 /system/priv-app/(folder for app)/(name of apk file)
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Hi, I'm kinda at my wit's end with this problem that I'm currently facing and would very much appreciate some help. For some background, I'm on a Oneplus 7 Pro running stock firmware (OOS 11.0.7.1). I originally was planning on installing a Magisk module to spoof my device (Pixelify) to gain Pixel features. I noticed that one of the features was patching over the Android System Intelligence. It didn't work out the way I was expecting and I decided to uninstall the module. That went fine, but I wanted to make sure I was on the correct version of Android System Intelligence as well, so afterwards, I went into settings and "uninstalled all updates" to the app, which I assumed would have reset that particular app back to the version that originally shipped with the device.
Now, here's where the problem began. I restarted my device and I ended up sitting on the boot animation screen for over 20 mins. At that point, I knew something was wrong as it still hadn't booted into the system yet. I went into TWRP and decided to do a full reflash of the ROM (without wiping my data) and reflashed magisk as well. No luck either, still stuck at the infinite boot. So I went a step further and dirty flashed again without reinstalling magisk to see if it might have been any other modules not playing nice. Of course, that didn't work either and I'm still currently bootlooping. It's been going for the past 3 hours now...
In any case, would anyone have any suggestions on what I can do without doing a full wipe? I have access to TWRP and decrypting works fine. All of my files seem intact at the moment and from what I see, the ROM is has installed mostly fine, just something is causing it to hang during boot. Is there any way I can view the code running in the background during boot to see what's causing it to hang? Or maybe some other potential solution that I could try?
HunterBlade said:
Hi, I'm kinda at my wit's end with this problem that I'm currently facing and would very much appreciate some help. For some background, I'm on a Oneplus 7 Pro running stock firmware (OOS 11.0.7.1). I originally was planning on installing a Magisk module to spoof my device (Pixelify) to gain Pixel features. I noticed that one of the features was patching over the Android System Intelligence. It didn't work out the way I was expecting and I decided to uninstall the module. That went fine, but I wanted to make sure I was on the correct version of Android System Intelligence as well, so afterwards, I went into settings and "uninstalled all updates" to the app, which I assumed would have reset that particular app back to the version that originally shipped with the device.
Now, here's where the problem began. I restarted my device and I ended up sitting on the boot animation screen for over 20 mins. At that point, I knew something was wrong as it still hadn't booted into the system yet. I went into TWRP and decided to do a full reflash of the ROM (without wiping my data) and reflashed magisk as well. No luck either, still stuck at the infinite boot. So I went a step further and dirty flashed again without reinstalling magisk to see if it might have been any other modules not playing nice. Of course, that didn't work either and I'm still currently bootlooping. It's been going for the past 3 hours now...
In any case, would anyone have any suggestions on what I can do without doing a full wipe? I have access to TWRP and decrypting works fine. All of my files seem intact at the moment and from what I see, the ROM is has installed mostly fine, just something is causing it to hang during boot. Is there any way I can view the code running in the background during boot to see what's causing it to hang? Or maybe some other potential solution that I could try?
Click to expand...
Click to collapse
When you removed the magisk module and uninstalled the updates, did you boot into TWRP and wipe your cache and dalvik cache(but not factory reset or wipe data partition)? If you didn't wipe cache or dalvik, try booting into TWRP and wipe cache and dalvik cache(but DO NOT factory reset). To wipe cache and dalvik cache, boot into TWRP and sekect the Wipe option, then select "advanced wipes", you'll see a list of partitions, select only the cache and dalvik partitions(do not select any other partitions) then swipe the slider to initiate the wipe, when it finishes, reboot your device, it might take 10 or 20 minutes to boot because it has to rebuild the cache and dalvik cache with the new changes that you've made.
Generally, when making changes to the system partition, booting into recovery after making the changes and wiping cache is required in order for the device to load the system with the changes that were made instead of continiung to load cached data from before the changes were made, this tends to cause issues because the device is loading cached data that it can't use or understand anymore. Also, reflashing your ROM without wiping cache and dalvik cache would not solve this issue. You should do this any time you add/remove/modify/delete/uninstall/edit anything at all in the system partition, even if you only changed one tiny thing, you still need to boot into recovery then wipe cache and dalvik cache then reboot to apply the changes. This is not required when changing things in the user partition but it is absolutely vital that you do it when changing anything involved in the system partition.
Droidriven said:
When you removed the magisk module and uninstalled the updates, did you boot into TWRP and wipe your cache and dalvik cache(but not factory reset or wipe data partition)? If you didn't wipe cache or dalvik, try booting into TWRP and wipe cache and dalvik cache(but DO NOT factory reset). To wipe cache and dalvik cache, boot into TWRP and sekect the Wipe option, then select "advanced wipes", you'll see a list of partitions, select only the cache and dalvik partitions(do not select any other partitions) then swipe the slider to initiate the wipe, when it finishes, reboot your device, it might take 10 or 20 minutes to boot because it has to rebuild the cache and dalvik cache with the new changes that you've made.
Generally, when making changes to the system partition, booting into recovery after making the changes and wiping cache is required in order for the device to load the system with the changes that were made instead of continiung to load cached data from before the changes were made, this tends to cause issues because the device is loading cached data that it can't use or understand anymore. Also, reflashing your ROM without wiping cache and dalvik cache would not solve this issue. You should do this any time you add/remove/modify/delete/uninstall/edit anything at all in the system partition, even if you only changed one tiny thing, you still need to boot into recovery then wipe cache and dalvik cache then reboot to apply the changes. This is not required when changing things in the user partition but it is absolutely vital that you do it when changing anything involved in the system partition.
Click to expand...
Click to collapse
Thanks for the response! Unfortunately, I already wiped the dalvik cache after I reflashed my ROM yesterday and it didn't end up being able to boot. Since the OnePlus 7 Pro is an a/b device, there's no other cache partition to wipe.
I ended up leaving it to run on the boot animation screen until it ran out of battery (just to see what would happen). Besides for the phone becoming burning hot to the touch, it just stayed at that screen for another hour or 2 before it finally ran out of battery. This leads me to believe that it's definitely doing something in the background at that time, but just not sure what.
Edit: Just for some extra context, I also created a flashable zip of the latest OEM version of the Android System Intelligence APK and flashed it to system/app through twrp. Since I'm not able to boot to unlock my device, I thought this was the only way to install the app. In any case, it didn't make a difference either. Not sure if this means maybe the APK wasn't the issue or if this just didn't install the app the way I was expecting. No error codes when flashing the zip though.
HunterBlade said:
Thanks for the response! Unfortunately, I already wiped the dalvik cache after I reflashed my ROM yesterday and it didn't end up being able to boot. Since the OnePlus 7 Pro is an a/b device, there's no other cache partition to wipe.
I ended up leaving it to run on the boot animation screen until it ran out of battery (just to see what would happen). Besides for the phone becoming burning hot to the touch, it just stayed at that screen for another hour or 2 before it finally ran out of battery. This leads me to believe that it's definitely doing something in the background at that time, but just not sure what.
Edit: Just for some extra context, I also created a flashable zip of the latest OEM version of the Android System Intelligence APK and flashed it to system/app through twrp. Since I'm not able to boot to unlock my device, I thought this was the only way to install the app. In any case, it didn't make a difference either. Not sure if this means maybe the APK wasn't the issue or if this just didn't install the app the way I was expecting. No error codes when flashing the zip though.
Click to expand...
Click to collapse
Use TWRP to create a backup of your device in its current state, then try to extract the data from the backup, if the data is intact, it can be restored once you get the device working. If your data is intact in the backup, you can do a full system and data wipe via TWRP then reflash your ROM then restore the data that you want restored. This "should" get you back to where you want to be. Be careful, be certain of what you do at every step or you may end up losing data or not being able to get it to work while at the same time be able to keep your previous data.
Droidriven said:
Use TWRP to create a backup of your device in its current state, then try to extract the data from the backup, if the data is intact, it can be restored once you get the device working. If your data is intact in the backup, you can do a full system and data wipe via TWRP then reflash your ROM then restore the data that you want restored. This "should" get you back to where you want to be. Be careful, be certain of what you do at every step or you may end up losing data or not being able to get it to work while at the same time be able to keep your previous data.
Click to expand...
Click to collapse
Just finished backing up my data through TWRP and and did a full reformat of my device. After reflashing my ROM, I was back up and running! So thanks for the tip! However, after restoring the data partition, I realized that the issue was with the data partition specifically rather than on the system side as I had the same problem again. So I cleared the data partition again but kept data/media (internal storage) intact, and just like that, the device booted just fine this time.
Would you have any suggestions on what I could do to to troubleshoot the data partition? I have some important app info that I need to get the data back from.
Or if not, do you know how to capture logs from a failed boot?
HunterBlade said:
Just finished backing up my data through TWRP and and did a full reformat of my device. After reflashing my ROM, I was back up and running! So thanks for the tip! However, after restoring the data partition, I realized that the issue was with the data partition specifically rather than on the system side as I had the same problem again. So I cleared the data partition again but kept data/media (internal storage) intact, and just like that, the device booted just fine this time.
Would you have any suggestions on what I could do to to troubleshoot the data partition? I have some important app info that I need to get the data back from.
Or if not, do you know how to capture logs from a failed boot?
Click to expand...
Click to collapse
Logs from logcat do not persist through reboot. You need to look at your last_kmsg file, kmsg persists after reboot and it should capture the issue. If you have important app data, it should have been stored in data/media in your Android/(name of app) folder and your apps should be in data/data/app folder.
In the future, I recommend booting into TWRP and creating a backup before you make any kind of changes to your device, then, if the change causes an issue you can just boot into TWRP and restore the backup, this will put you back to what you had right before you made the change. Then you can troubleshoot what caused the issue and find a solution to how to apply your change without causing the issue again.
Droidriven said:
Logs from logcat do not persist through reboot. You need to look at your last_kmsg file, kmsg persists after reboot and it should capture the issue. If you have important app data, it should have been stored in data/media in your Android/(name of app) folder and your apps should be in data/data/app folder.
In the future, I recommend booting into TWRP and creating a backup before you make any kind of changes to your device, then, if the change causes an issue you can just boot into TWRP and restore the backup, this will put you back to what you had right before you made the change. Then you can troubleshoot what caused the issue and find a solution to how to apply your change without causing the issue again.
Click to expand...
Click to collapse
Yeah, lesson learned with that. I'm just glad I was able to backup my data in TWRP, which means I should theoretically be able to extract them back out again if I really need them. But back to the topic, I did check my last_kmsg file and it was unfortunately empty.
What I did do though was since I still have access to my recovery, I pushed my PC's adb keys to my device to be able to execute the command and grab a logcat during boot.
Could you by any chance take a look at the file (it's a onedrive preview link) to see if you might be able to notice the issue? I'm going into the territory of Googling everything and I was just completely lost when I looked at the file as I have no idea which errors actually matter and which ones don't. Thanks in advance!
HunterBlade said:
Yeah, lesson learned with that. I'm just glad I was able to backup my data in TWRP, which means I should theoretically be able to extract them back out again if I really need them. But back to the topic, I did check my last_kmsg file and it was unfortunately empty.
What I did do though was since I still have access to my recovery, I pushed my PC's adb keys to my device to be able to execute the command and grab a logcat during boot.
Could you by any chance take a look at the file (it's a onedrive preview link) to see if you might be able to notice the issue? I'm going into the territory of Googling everything and I was just completely lost when I looked at the file as I have no idea which errors actually matter and which ones don't. Thanks in advance.
Click to expand...
Click to collapse
Too many errors for me to volunteer my time to figure out.
All I can say is, at each line that reports an error, it states the error then lists the service(s) or app(s) that are involved in or effected by that error, everything listed after the error all the way down the list to the next error are related to that error.
Do a Google search for each error and the name of the package that immediately follows that error.
Droidriven said:
Too many errors for me to volunteer my time to figure out.
All I can say is, at each line that reports an error, it states the error then lists the service(s) or app(s) that are involved in or effected by that error, everything listed after the error all the way down the list to the next error are related to that error.
Do a Google search for each error and the name of the package that immediately follows that error.
Click to expand...
Click to collapse
No worries, totally understandable. I think Titanium Backup might actually be my saving grace, as it's able to read TWRP files as well. So all I have to do is run my backup through that and have it directly restore my data. In any case, appreciate the advice you've given so far!
you might probably found a fix but you're supposed to put the other os in the internal storage and not the micro sd card since it wont detect bootable drives just like on a pc and if u didnt install the os on the sd card then you can search for a boot unlocker which can unlock your phone from the infinite boot based on your phone and os
have a good day