Related
**NOTE** For the SM-P900! However steps should be the same for SM-P905 EXCLUDING THE FILE TYPES (THEY ARE DIFFERENT DO NOT ATTEMPT TO USE THE FILES FOR THE SM-P900 OR BYE BYE TO YOUR NOTE 12.2 Pro because now you have a problem that may or may not be repairable/reversible). You just have to make sure you have the coordinating files for the process!
If anyone else has issues try this and these steps to complete the Root/Custom ROM/TWRP Recovery installations successfully for a "First time go":
1. Remove Kies and Kies3 files, related files, folders, and everything that has anything to do with the primary installation of either the two programs on your PC and your devices. When/if prompted, select the checkable box and elect not save any type of files... if you want to keep them save them OFF your main PC on a flash or removable storage device.
2. REMOVE ALL SAMSUNG DRIVERS AND REPLACE WITH ONLY OFFICIAL SAMSUNG DRIVES!!! THIS IS A BIG MUST!
3. Using your USB 2.0 cable and ports Install the Custom Rom "P900XXUANB3-RecoveryImg.tar" FIRST and flash it via ODIN 3.07 under the PDA checkbox that is "fixed" (so you noobs don’t make any soft bricks if this is your first attempt at rooting), and only use the ODIN 3.07 THAT COMES W/ CHAINFIRES AUTO ROOT .zip file and then unzip the folder to open ODIN 3.07 ONLY! This is only because I have read that there have been issues installing the SU via Chain Fires Auto Root Process... the file is called (currently as of 25 JUNE 2014) "P900XXUANB3-RecoveryImg.tar" PDA select it and then start when in DOWNLOAD MODE on your device. Manually select DOWNLOAD MODE if you have to BEFORE PRESSING START! Otherwise, one is just going to sit there and not accomplish anything.
http://forum.xda-developers.com/attachment.php?attachmentid=2591013&d=1392923580
http://forum.xda-developers.com/attachment.php?attachmentid=2591159&d=1392930654
http://forum.xda-developers.com/attachment.php?attachmentid=2775098&d=1401644348
4 Reboot back into DOWNLOAD MODE. Flash in ODIN 3.07 with the PDA section and select this file next to install: "openrecovery-twrp-2.7.1.0-v1awifi.img.tar"
5. In DOWNLOAD MODE and flash the file under the PDA box TWRP (OR CURRENT RECOVERY OF YOUR CHOICE THAT IS AVAILABLE)
6. AGAIN... Restart your device into DOWNLOAD MODE via ODIN 3.07 and select PDA and then finally root this: "CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5" Then you can backup, restore, flash anything, and be happy! YOU SHOULD FINALLY HAVE A SUCCESSFUL ROOT! Turn off and REBOOT into RECOVERY to see if TWRP stuck and then reboot to see if the SU stuck. IF everything stuck reboot back into TWRP to flash whatever rom is available MAKE SURE TO BACK UP EVERY FILE BEFORE YOU FLASH ANY NON-STOCK ROMS. If not successful rinse wash and repeat until it does!
http://download.chainfire.eu/384/CF-Root/CF-Auto-Root/CF-Auto-Root-v1awifi-v1awifixx-smp900.zip
7. That’s it you should have root and a custom rom and recovery if you followed these instructions for flashing via ODIN 3.07 and Chainfires AutoRoot files. If you still have an issue repeat until root/recovery/Rom sticks. If you have to update the Binary for the SU just go to the Google Play Store and install the app and then try it again till it works. GOOD LUCK it worked for me this way!
**IMPORTANT**
BACK UP BACK UP BACK UP BACK UP after every flash that is possible to back up. If you can, back up the NON-SU stock ROM BEFORE installing SU, after installing the recovery and/or back up.
***IF I HELPED YOU OUT THANK ME***
DISCLAIMER - all research was observed via comments on the thread according to issues people have been having during ROOTING the device I simply have compiled the data and made a check list!
Need a link to the files you mentioned.
Thanks. Very helpful.
I have a P900. Is there a way to unroot and bring a unit back to stock? My main concern is if Samsung sends out a software/firmware update, and a device is already rooted, can the update be applied?
sstea said:
Thanks. Very helpful.
I have a P900. Is there a way to unroot and bring a unit back to stock? My main concern is if Samsung sends out a software/firmware update, and a device is already rooted, can the update be applied?
Click to expand...
Click to collapse
Read THIS
But still one quiestion, why the heck you root your device if you are going to update it via Samsung's official ways. Ah and one more question.. why the heck would you want to update your device if it's rooted?
A new update from Samsung can patch all known security holes and make your device unrootable, and since you are rooted now, one would think that you don't want to loose it. Or where do I know if you rooted because it sounded nice and cool, without knowing what you did and most importantly WHY you did.
Spere said:
Read THIS
But still one quiestion, why the heck you root your device if you are going to update it via Samsung's official ways. Ah and one more question.. why the heck would you want to update your device if it's rooted?
A new update from Samsung can patch all known security holes and make your device unrootable, and since you are rooted now, one would think that you don't want to loose it. Or where do I know if you rooted because it sounded nice and cool, without knowing what you did and most importantly WHY you did.
Click to expand...
Click to collapse
Thanks. I appreciate the reply. I have rooted many devices before. I have to admit that it was more of following posted instructions and not fully understanding the details. What gives me pause is how extremely limited the support is for this tablet. I want to root my note if I can make it more responsive, get rid of bloatware, enable more apps for multi-window, titanium backup, etc. I want to make sure that if I root that I don't get stuck with on an old release. So will previously rooted Notes be able to get the necessary files to easily update and maintain root, or does rooting now mean that a tablet may be stuck at the current release? Thanks
sstea said:
Thanks. I appreciate the reply. I have rooted many devices before. I have to admit that it was more of following posted instructions and not fully understanding the details. What gives me pause is how extremely limited the support is for this tablet. I want to root my note if I can make it more responsive, get rid of bloatware, enable more apps for multi-window, titanium backup, etc. I want to make sure that if I root that I don't get stuck with on an old release. So will previously rooted Notes be able to get the necessary files to easily update and maintain root, or does rooting now mean that a tablet may be stuck at the current release? Thanks
Click to expand...
Click to collapse
You can always flash stock firmware via odin
I was just wondering if everyone was having a much easier time with achieving root now? Kies caused me to "Hang" a lot during the Root and custom rom to stick w root... as of right now i can not get the only ONE custom ROM that looks promising, i have found by GWatts (correct me if i am wrong and i apologize if i have typed the wrong screen name handle) i believe his handle is... at this point im not sure what i am doing wrong as of yet but im sure i am missing a step or i just need to start back at unroot back to stock firmware and try and try again lol. not saying anything is wrong with his work at all by any means because people other than me with the same device have gotten it to stick and im just wishing i could as well because its sweet looking ROM! NOT TO MENTION THE ONLY ONE THAT IS OUT (that is which i know about. i haven't been on in a few months idk), SO KUDOS TO WATTS i just haven't been successful at installing his custom rom just yet... Im hoping that its just going to need to be erased again and then reformatted after a factory reset and what not, i pray it sticks because his incorporation of the aroma installer was a nice touch and his ROM really looks good... Now if i can just get it not to stick at samsung boot logo and freeze id be good lol!
sanvara said:
Need a link to the files you mentioned.
Click to expand...
Click to collapse
ok
I followed your instructions but while flashing the cf-auto-root file my screen got all distorted (speckled grains of color), and nothing else happened for about 15 minutes, until I just unplugged it and shut it off.
Now when I power it on it gives me the error "Firmware upgrade uncountered an issue. Please select recovery mode in Kies & try again."
I wonder what I did wrong.
pnuker said:
I followed your instructions but while flashing the cf-auto-root file my screen got all distorted (speckled grains of color), and nothing else happened for about 15 minutes, until I just unplugged it and shut it off.
Now when I power it on it gives me the error "Firmware upgrade uncountered an issue. Please select recovery mode in Kies & try again."
I wonder what I did wrong.
Click to expand...
Click to collapse
**Edit**
I went back and reflashed the twrp file and it got me out of the error screen. I installed supersu, and then re-flashed the cf-auto-root file, and it worked like a charm. I'm not sure if it was the installation of supersu, or just repeating the process that fixed it, but I'm happy either way...
Thank you! I succesfully rooted my SM-P900 after all mentioned problems ( hanging in the cache.img and after a while a disturbed screen etc.) with your guide. I am a very happy rooter now.
Thanks,
Thanks to the poster. I tried rooting with the instructions from a few other sites and thought I bricked it,
Followed your instructions, and presto.. Rooted! :good:
Rooted!
Thanks for your post. This is my first time ever rooting a device. Your method worked perfectly!
your welcome!
frankiecxyz said:
Thanks for your post. This is my first time ever rooting a device. Your method worked perfectly!
Click to expand...
Click to collapse
your very welcome! it took me a bit to get it down but i eventually figured it out and at the time information on rooting the device was hard to find with this specific model. then i discovered what the issues where and felt the need to post it! im glad i could help!:laugh:
Flash SU with TWRP not ODIN
Here's my story...
Received my new UK spec SM-P900 Note Pro 12.2, ran through the initial setup, performed two OTA upgrades to KOT49H.P900XXUANI1, then attempted to flash SU using Odin 3.07 using the various instructions on this forum. Result: failed cache flash and soft brick!
Used Keis 3 to recover the tablet which took two hours! After more reading I discovered the quick boot recovery flash method, so re-attempted on a different PC, with exactly the same result. Re-flashed the boot, tried again, fail, again, fail, etc, etc. Various permutations of PCs, Odin versions and USB ports were tried.
Concluded that the Odin method was NEVER going to work, so had a rethink. Used Odin to flash TWRP v2.8. Downloaded the latest SU-BETA v2.7 flash for TWRP (not Odin), copied it to the root of the tablet SD and then flashed it with TWRP. Worked first time with no messing about!!!
Booted, ran SU and upgraded to Premium, disabled KNOX from within SU. Tablet locked up. Booted, re-ran SU, disabled KNOX again, this time successfully. Ran Titanium, filtered with KNOX and froze all occurrences, then de-installed KNOX completely. :good:
Lesson learnt... DO NOT use Odin to flash SU on a P900 !
soft bricked
Hello!
First of all let me say that I'm a complete newbie, this is my first android device. I tried to root my SM-P900 (P900XXUANI1) using an online guide (image with URL attached, as I am not allowed to paste URLs)
Unfortunately at Step 10 (flashing with Odin) the operation failed and now I ended up with a soft bricked device (I assume this is the correct definition). It will only show the message asking me to connect it to KIES to recover it.
I know i can try to use KIES 3 and restore it, but before that i would like to ask if there is any alternative which will allow me to unbrick the device without losing all my data... (yeah i know...).
If i follow this guide will this help? I'm not sure if I can even put the device in download mode again as it shows the error message about connecting it to KIES...
At this point I don't care about rooting, I just want to unbrick the device.... I understand the guide up to (and including) step 3. But for the rest of the steps I'm lost Could anyone please explain them in a bit more detail? I don't want to install any custom firmware, just to unbrick it...
Any help would be very appreciated!
Thank you
Yemble said:
Here's my story...
Received my new UK spec SM-P900 Note Pro 12.2, ran through the initial setup, performed two OTA upgrades to KOT49H.P900XXUANI1, then attempted to flash SU using Odin 3.07 using the various instructions on this forum. Result: failed cache flash and soft brick!
Used Keis 3 to recover the tablet which took two hours! After more reading I discovered the quick boot recovery flash method, so re-attempted on a different PC, with exactly the same result. Re-flashed the boot, tried again, fail, again, fail, etc, etc. Various permutations of PCs, Odin versions and USB ports were tried.
Concluded that the Odin method was NEVER going to work, so had a rethink. Used Odin to flash TWRP v2.8. Downloaded the latest SU-BETA v2.7 flash for TWRP (not Odin), copied it to the root of the tablet SD and then flashed it with TWRP. Worked first time with no messing about!!!
Booted, ran SU and upgraded to Premium, disabled KNOX from within SU. Tablet locked up. Booted, re-ran SU, disabled KNOX again, this time successfully. Ran Titanium, filtered with KNOX and froze all occurrences, then de-installed KNOX completely. :good:
Lesson learnt... DO NOT use Odin to flash SU on a P900 !
Click to expand...
Click to collapse
Have you got a link to the odin rwrp 2.7 you used and the su 2.7 flash for twrp please?
VenomousViper said:
**NOTE** For the SM-P900! However steps should be the same for SM-P905 EXCLUDING THE FILE TYPES (THEY ARE DIFFERENT DO NOT ATTEMPT TO USE THE FILES FOR THE SM-P900 OR BYE BYE TO YOUR NOTE 12.2 Pro because now you have a problem that may or may not be repairable/reversible). You just have to make sure you have the coordinating files for the process!
If anyone else has issues try this and these steps to complete the Root/Custom ROM/TWRP Recovery installations successfully for a "First time go":
1. Remove Kies and Kies3 files, related files, folders, and everything that has anything to do with the primary installation of either the two programs on your PC and your devices. When/if prompted, select the checkable box and elect not save any type of files... if you want to keep them save them OFF your main PC on a flash or removable storage device.
2. REMOVE ALL SAMSUNG DRIVERS AND REPLACE WITH ONLY OFFICIAL SAMSUNG DRIVES!!! THIS IS A BIG MUST!.......
Click to expand...
Click to collapse
When i trying root, my SGN freeze in "cache". Odin show error and tablet goes to Emergency Firmware Recovery. Аnd it does not matter what program I use and how I do it.
Mine Reboots Constantly
I rooted my SM-900 about two weeks ago.
It worked great for a week until the device started rebooting by itself.
The first time a couple times a day, now it does it whenever as often as twice in 5 minutes.
Is there a way to see which app is causing this or does anyone know why this might be happening?
Though I rooted I haven't been poking around. I figured it'd be like using Linux but now I see it's not quite like that.
Thanks in advance.
sunnykhs said:
I rooted my SM-900 about two weeks ago.
It worked great for a week until the device started rebooting by itself.
The first time a couple times a day, now it does it whenever as often as twice in 5 minutes.
Is there a way to see which app is causing this or does anyone know why this might be happening?
Though I rooted I haven't been poking around. I figured it'd be like using Linux but now I see it's not quite like that.
Thanks in advance.
Click to expand...
Click to collapse
Have you cleared dalvic cache and cache in TWRP recovery? Be forewarned the process takes a while for cache wipe.
Sent from my SM-P900 using Tapatalk
Hi guys,
Not started a thread on XDA for years but I really am stumped.
I have claimed my girlfriends s6 (SM-G920F) after she upgraded and intended to root it and maybe try a few Oreo ROMs etc. After investigation I saw that (I think this is right) I don't need to OEM unlock this version of the device and rooting via Odin is the best way to do it. BTW if I do need to OEM unlock then that might be the solution to my issue, so if some one could clarify that'd be great.
So a week ago I downloaded Odin and also my old favourite CF-AutoRoot after putting in the device details. The package was generated, I unzipped and put it in a folder in my desktop
After putting the device in download mode I run Odin as administrator and plug it in. The device is recognised and I get the blue box to show this.
I then click the AP box and select the image file and click start, everything runs as expected to this point and I get PASS displayed in the info bar. On the phone the progress bar looks like it has not completed and I can see a small portion still to run. On the first try I left phone like this waiting for it reboot for over an hour. I was expecting 5he device to reboot and get the android with the red exclamation point. At this point I restarted manually and saw during the boot process an error message saying Recovery not SE Enforcing in red.
I have read a few posts saying this can be caused by the wrong image being used, so I downloaded the Auto root package again and made sure that it was all correct, but the same thing occurred.
I have been looking and reading for the last week to find a solution, but I'm still in the same position. Can anyone help or point me in the right direction?
If you need any more info let me know.
Thanks in advance
Jon
im in exacltly the same boat pal. was running nanorom on my rooted s6, but had no vr capability and just got some galaxy gear goggles. tried to reflash arter97 kernal and lost my whole setup. ive been in and out of hard brick for last 24hrs and am back now to where you are, i can access download and recoveries via three button combo, but any packages i flash with odin just fail out right.
ive been here before though and usually get out once i find the right stock rom and csc's for my version. iof i find anything ill come back and share it with you pal.
Cheers mate, it's really frustrating. I'll keep looking too and post back if I have any success.
Hi guys, this thread hasn't been responded to so I thought I'd just replied to it to give it a little bump up. I'd much appreciate it if anybody could help me out here.
Thanks again,
Jon
copernicus666 said:
Hi guys, this thread hasn't been responded to so I thought I'd just replied to it to give it a little bump up. I'd much appreciate it if anybody could help me out here.
Thanks again,
Jon
Click to expand...
Click to collapse
Just try bro to reflash full stock rom again by odin and after flash it , reflash cf-autoroot again
also , can you provide more information about your android version and your csc stock rom ?
what a f**k about!!!!
Right then Jon,
sorry for my delay but not the greatest at reponding to things at the best of times, but with my own s6 in a right old state, and a 7y.o and 4 month old in the house, my pc time is limited.
anyways, im guessing you're a bit like me, and you've had your fair share of flashing roms and roots since the days of old! (Galaxy thru and thru for me s 1,3,4,6, plus tabs and watches).
this s6 gt-920f is a completely different kettle of fish mate. where you're at at the minute, if your still stuck in bootloop with no recovery, your gonna want to find twrp recovery, as you know mate, google will be your guide. you flash this just like a rom or the old cwm, download a zip, bang it in ap/pda in odin and let it flash. KEY NOTE IS MAKE SURE ODIN HAS ~"AUTO-REBOOT"~ UNTICKED, UNCHECKED, NO MARK IN THE BOX. THIS IS KEY TO THE RESTORATION PROCESS GOING FORWARD. Once odin shows that the file has flashed and passed, get ready to perform a three button power reset, Home button, Vol DOWN and Power for 8 seconds. when your pc makes the badong sound and the screen goes off, IMMEDIATELY SWITCH TO Vol UP, Home and Power, thus straight into recovery mode, AND WAIT.
You should see the blue and silver TWRP splash screen and then the recovery options. Firstly, wipe and format everything, dalvik, caches and perform a factory reset. twrp should ask you to type yes to confirm, do it, there's nothing there yet any ways. if you get any issues about cant mount data or some jazz, DONT PANIC, use twrp to reformat the partition to ext4, your pc should ping to show reconnection to the phone.
Now whilst still in twrp, nav to the reset options and reboot into download mode. if all has go well, the scren should have the regular greenish odin screen but without all the samsung odin mode in at the top. odin should show the phone as a connected device, you should be able to access your memory card from your pc to transfer rom zips etc and get the phone back up the way you are used to.
if on the other hand you want to get back to vanila stock style android, with the expense of a tonload of bloatware and crapps, you're gonna wanna take a goggle at stuff like "G920F Repair Firmware X.X UK YYY) , Where X.X is 5.1, 6.1, 7.1, depending on the original android version your brick was on, and YYY is your carrier or network operator, off the top of my head they are VOD, TMO, O2U, H3G.
AGAIN A KEY POINT IF YOUR GOING THIS ROUTE, THESE FILES ARE MADE FOR INDIVIDUAL MODELS OF S6 (THERES ABOUT 12 MODEL NUMBERS -YOURS IS AND ALWAYS WILL BE SM-G920F - SO DO NOT EVER STRAY FROM THAT NUMBER!!!! ) THAT MEANS YOU NEED TO BE FINDING FILES LIKE "G920XXU5EXUE 4 files repair firmwares", THESE ARE YOUR SAVIOUR. GET THE ONE THAT MATCHES YOUR PHONE AND CARRIER OR ONE THAT IS AS NEAR AS DAMMIT, AND AGAIN PLEASE MAKE SURE FOR THE LOVE OF YOUR PHONE THAT YOU ONLY GET FILES MARKED G920, ANYTHING ELSE WILL RESULT IN VERY SERIOUS ERRORS.
YOUR ALSO GOING TO NEED SOMETHING CALLED A PIT FILE, EASY TO FIND, LOOK FOR " S6 ZEROFLTE HIDDEN IMG FILE" IN GOOGLE.
USE OUR OLD BUDDY ODIN TO FLASH THE FOUR FILES YOU GOT FROM THE REPAIR FIRMWARE ZIP, WHICH ARE USUALLY LABEL AP, BL, CP AND CSC.. NOW TAP THE PIT TAB IN ODIN (IGNORE THE WARNING) AND NAVIGATE TO THE HIDDEN.IMG FILE YOU GOT AND BANG IT HERE. ON THE OPTIONS TAB YOU WANT TO TICK AUTO REBOOT, REPARTITION, and NAND ERASE ALL. i know, i know, you probably never use it out of some shear panic but right now its kosher.
start the flash and take a break. like a big break. the process is gonna wipe the phone in totalilty, rewrite every bit of code and software and reload like new after about forty minutes.
now, if it doesnt, there are a few things we can look at but am gonna leave it here and hope you can make some use of the ramblings of a lost man. my 6 is currently in an inverted touch bug where if i touch one side of the screen, the opposite side responds so its a proper nightmare, typing anything means that a becomes l, s becomes k etc. thisis down to me drunk flashing the wrong roms for and s6 edge, g925f, hence all my warnings earlier. anyways, i need a reefer and a scran after all this, God, allah, buddah i hope it helps someone.
shiko2007 said:
Just try bro to reflash full stock rom again by odin and after flash it , reflash cf-autoroot again
also , can you provide more information about your android version and your csc stock rom ?
Click to expand...
Click to collapse
Hi, thanks for replying.
I'm on the original stock, I've not flashed any thing just yet. To be honest, I'm not sure it'd work.
The android version is 7.0 and the build is NRD90M.G920FXXS5EQH6
Be glad if you have any advise.
Thanks
copernicus666 said:
Hi, thanks for replying.
I'm on the original stock, I've not flashed any thing just yet. To be honest, I'm not sure it'd work.
The android version is 7.0 and the build is NRD90M.G920FXXS5EQH6
Be glad if you have any advise.
Thanks
Click to expand...
Click to collapse
if your not root yet just download latest your carrier/country firmware
from sammobile
and flash it by odin
but you are probably trip knox so you must root
so the steps you should do :
1-download your carrier/country firmware from sammobile
2-flash it by odin
3-flash cf-auto root to pass bootloop
or
download twrp recovery of g920f and flash it by odin to replace stock recovery then after flash it ,wipe delvik cash then flash su binary
DagsyMc said:
Right then Jon,
sorry for my delay but not the greatest at reponding to things at the best of times, but with my own s6 in a right old state, and a 7y.o and 4 month old in the house, my pc time is limited.
anyways, im guessing you're a bit like me, and you've had your fair share of flashing roms and roots since the days of old! (Galaxy thru and thru for me s 1,3,4,6, plus tabs and watches).
this s6 gt-920f is a completely different kettle of fish mate. where you're at at the minute, if your still stuck in bootloop with no recovery, your gonna want to find twrp recovery, as you know mate, google will be your guide. you flash this just like a rom or the old cwm, download a zip, bang it in ap/pda in odin and let it flash. KEY NOTE IS MAKE SURE ODIN HAS ~"AUTO-REBOOT"~ UNTICKED, UNCHECKED, NO MARK IN THE BOX. THIS IS KEY TO THE RESTORATION PROCESS GOING FORWARD. Once odin shows that the file has flashed and passed, get ready to perform a three button power reset, Home button, Vol DOWN and Power for 8 seconds. when your pc makes the badong sound and the screen goes off, IMMEDIATELY SWITCH TO Vol UP, Home and Power, thus straight into recovery mode, AND WAIT.
You should see the blue and silver TWRP splash screen and then the recovery options. Firstly, wipe and format everything, dalvik, caches and perform a factory reset. twrp should ask you to type yes to confirm, do it, there's nothing there yet any ways. if you get any issues about cant mount data or some jazz, DONT PANIC, use twrp to reformat the partition to ext4, your pc should ping to show reconnection to the phone.
Now whilst still in twrp, nav to the reset options and reboot into download mode. if all has go well, the scren should have the regular greenish odin screen but without all the samsung odin mode in at the top. odin should show the phone as a connected device, you should be able to access your memory card from your pc to transfer rom zips etc and get the phone back up the way you are used to.
if on the other hand you want to get back to vanila stock style android, with the expense of a tonload of bloatware and crapps, you're gonna wanna take a goggle at stuff like "G920F Repair Firmware X.X UK YYY) , Where X.X is 5.1, 6.1, 7.1, depending on the original android version your brick was on, and YYY is your carrier or network operator, off the top of my head they are VOD, TMO, O2U, H3G.
AGAIN A KEY POINT IF YOUR GOING THIS ROUTE, THESE FILES ARE MADE FOR INDIVIDUAL MODELS OF S6 (THERES ABOUT 12 MODEL NUMBERS -YOURS IS AND ALWAYS WILL BE SM-G920F - SO DO NOT EVER STRAY FROM THAT NUMBER!!!! ) THAT MEANS YOU NEED TO BE FINDING FILES LIKE "G920XXU5EXUE 4 files repair firmwares", THESE ARE YOUR SAVIOUR. GET THE ONE THAT MATCHES YOUR PHONE AND CARRIER OR ONE THAT IS AS NEAR AS DAMMIT, AND AGAIN PLEASE MAKE SURE FOR THE LOVE OF YOUR PHONE THAT YOU ONLY GET FILES MARKED G920, ANYTHING ELSE WILL RESULT IN VERY SERIOUS ERRORS.
YOUR ALSO GOING TO NEED SOMETHING CALLED A PIT FILE, EASY TO FIND, LOOK FOR " S6 ZEROFLTE HIDDEN IMG FILE" IN GOOGLE.
USE OUR OLD BUDDY ODIN TO FLASH THE FOUR FILES YOU GOT FROM THE REPAIR FIRMWARE ZIP, WHICH ARE USUALLY LABEL AP, BL, CP AND CSC.. NOW TAP THE PIT TAB IN ODIN (IGNORE THE WARNING) AND NAVIGATE TO THE HIDDEN.IMG FILE YOU GOT AND BANG IT HERE. ON THE OPTIONS TAB YOU WANT TO TICK AUTO REBOOT, REPARTITION, and NAND ERASE ALL. i know, i know, you probably never use it out of some shear panic but right now its kosher.
start the flash and take a break. like a big break. the process is gonna wipe the phone in totalilty, rewrite every bit of code and software and reload like new after about forty minutes.
now, if it doesnt, there are a few things we can look at but am gonna leave it here and hope you can make some use of the ramblings of a lost man. my 6 is currently in an inverted touch bug where if i touch one side of the screen, the opposite side responds so its a proper nightmare, typing anything means that a becomes l, s becomes k etc. thisis down to me drunk flashing the wrong roms for and s6 edge, g925f, hence all my warnings earlier. anyways, i need a reefer and a scran after all this, God, allah, buddah i hope it helps someone.
Click to expand...
Click to collapse
Legendary post! Cheers mate you just made my morning. I knew the XDA guys would pull through.
I'm on my way to work, but I'll give it a crack later.
Cheers bud - Kudos
All links to articles that I tried to follow are at the bottom of this post. Attempt this root at your own risk!
Let me start out by saying I have successfully rooted Android phones before (Motorola Droid from 2009 and LG G3 Vigor from but this phone was not wanting to cooperate from the very start. My intention was to root my Galaxy S8 so that I can install a custom ROM and get rid of unneeded software (i.e. Google, Sprint software, etc...). As it turns out, this is easier said then done. After A LOT of searching on this site and DuckDuckGo, I came across a few articles that seemed like they were legit and would get the job done. So, I prepared by downloading all the necessary files (the new firmware, Odin, adb, etc...) and factory resetting my device. I then tried to follow along with the first tutorial. Everything looked good. I was able to get everything set up just fine. My problem started when I was in the Download mode on the device (the light blue screen that says "Downloading..." in the center).
Before even connecting the device, I had PrinceComsy Odin fired up and ready to go being sure to follow the tutorial steps completely and accurately. Then, I connected my device and hit start.
...It's looking good!...
...Added!...
After a few other very promising log outputs .... nothing happened. I thought to myself, "Okay, no big deal. It said I may have to retry a couple times to get it to work." So, I reset everything back up and rebooted the phone back into Download mode. This time I tried the regular Odin version instead. However, I was presented with an error after hitting start: "SHA256 Invalid". After some searching, I found out that if you get that error in the regular Odin you should try the PrinceComsy Odin. Wow, okay, so I went back to PrinceComsy Odin and tried again to no avail. Still didn't work.
This is when I started to become concerned that I wouldn't be able to root this phone. Note: At this point, the phone still booted back into the OS with no problems. i.e. It was not bricked...yet!
I wasn't even past the Odin part of the root and already I was having problems. What was going on? I did some more searching around the web and these forums and found something interesting. Supposedly having your device plugged into the USB3.0 ports on your computer can sometimes mess Odin up. I tried plugging the phone into the normal USB2.0 ports on the back of my computer and restarted the whole process again.
Now, I was getting some weird errors. Stuff like "odin fail complete(write) operation" and "fail (no pit partition)". I started to sweat a little bit. I can't screw this phone up! I rebooted the phone just to make sure everything was still fine on the device. It booted into OS perfectly fine, again.
Okay, so one more try, and then I'll stop. I did everything again (booted phone into download mode, fired up PrinceComsy Odin, added firmware to appropriate slots, connected the device, and hit start). Once again, everything looked fine until I got another error, "Error SW REV CHECK FAIL : [aboot] Fused 4 > Binary 2". It was at this point I looked more closely at the text on the top left of the Download mode.
My bootloader was locked and for some reason that had something to do with all this failing. After all, I wasn't trying to change the bootloader at all; just trying to gain access to root permissions. Most of the tutorials I looked at said to enable the "OEM Unlocking" option in settings. However, I didn't have this option at all. I didn't think it would matter that much but boy was I wrong. I decided to give up, boot back into the OS, and call it a day.
I rebooted the phone and it took longer than normal. Like way longer. It was stuck at the Samsung splash screen for about an hour before I realized that the device was probably bricked. "Great," I thought. So, I managed to find the stock firmware on Sam Mobile. Once again, I used Odin and tried flashing the stock firmware. This time however, Odin actually completed! I thought I had done it. I successfully restored my phone, right? Nope, turns out the firmware I installed wasn't actually Sprint's original stock firmware. I'm not sure exactly what it was but everything looked fine until I entered the setup device screen. Some settings were greyed out and I was getting some weird error messages (I don't remember what they were). Then, after completing the setup, I noticed that I was no longer on the Sprint network. I also had some of Cricket's and MetroPCS apps installed by default. It was like the phone was in a so called "carrier limbo" and unable to connect to any one carrier. The weird thing is I was still able to send and receive phone calls and receive text messages. It was at this point, I realized I royally screwed up my phone I tried to factory reset (through the Recovery mode) hoping that would fix some issues but nope. Didn't seem to fix anything.
The next day, I took the phone back to the Sprint store to see if they could do anything. Of course, I knew they were just going to try factory resetting it as well. The tech came back and said they could ship it off to Samsung and have them repair it or replace it. I am really crossing my fingers and hoping that they just replace the phone. That would fix all of my issues (including the cracked screen ). Now, I have to wait 5-7 business days before I know if I'm going to be stuck without a Galaxy phone or if I'm going to get a new phone straight from the factory. Who knows? As of now, I am using my old LG G3 Vigor temporarily while Samsung looks at my phone.
TL;DR: If you are on the Sprint network, have a Samsung Galaxy S8, model sm-g950u, US variant, ATTEMPT ROOTING AT YOUR OWN RISK! Sprint apparently has some pretty intense software locks on their phones which is rather unfortunate seeing as I believe Android to be an open-source and modifiable OS. Basically, we have to use the phone as it is from Sprint or we can't use it all. This is unacceptable.
I will update this post with any new information as it becomes available.
Links
LG G3 Vigor: https://support.sprint.com/support/device/LG/LG_G3_Vigortrade-dvc8360002prd
Motorola Droid: https://www.cnet.com/products/motorola-droid-verizon-wireless/review/
1st Root Method: http://www.stechguide.com/root-galaxy-s8-and-s8-plus-snapdragon-variants/
2nd Root Method: https://forum.xda-developers.com/ga...on-sampwnd-t3658911/post73455543#post73455543
3rd Root Method: https://forum.xda-developers.com/galaxy-s8/development/root-partcyborgrom-aqi6-deodexed-t3702988
Restoring Stock Firmware: http://rootmygalaxy.net/stock-firmware-on-galaxy-s8-and-galaxy-s8-plus/
Before rooting, flash it with the unbranded "U1" firmware which is much cleaner (bloat free), and also works on all carriers as long as the sim lock is unlocked.
I just use the regular Odin and flash TWRP for the correct Samsung device then find a nice custom ROM you can install using TWRP I wrote several guides for it using Samsung phones, A3(2017, A5(2017, A7(2017, A5(2014, J8(2018 other than the button sequence for DL/recovery it is pretty much works the same, installing a stock ROM I did with Odin but finding a good stock ROM that you can download at a decent pace is harder. The OEM unlock is under Dev option in your phone though combined with USB debugging so you would need to do that before using Odin. But I get where you are coming from most guides are confusing as hell.
I've looked through the forums to identify a similar problem to mine in hopes I can resolve this issue but I've not found one. So here's my problem.
I have a UK Galaxy S7 running on the 6.0 firmware that came with the phone when it first released (Yes I know it's very old and should have updated along the way but I had plans to root and install customs at some point which obviously didn't happen). The phone is unrooted and the stock rom is the XEU version with Multi-CSC (according to recovery)
The phone was running fine until a few days ago when all of a sudden it shut off and wouldn't power on via the power button. So I pressed and held Home + Volume Down + Power. The green screen appeared and selected Volume Down to restart the device (as you do in odd situations like this).
PHONE IS NOW STUCK IN BOOTLOOP!!!
I have tried various means (not including flashing) to get the phone to boot to the home screen with no success. I have not performed a factory reset from recovery because I have various data, including pictures, music and other software on the internal storage which I wish to keep and not lose. The phone is still under warranty so I can take it to a Samsung repair outlet to get them to fix it for me but due to data privacy or whatever, they have to format it clean to then install the most recent firmware.
I've been scouring the forums for help on flashing OTA updates which retain data on phone whilst possibly allowing my phone to boot into the home screen so I can access my data. Is such a thing possible?
Any help would be greatly appreciated.
You can flash the latest firmware without losing data (as long as the hardware is not faulty) by downloading it from either sammobile, updato.com or using the samfirm tool here on XDA (Fastest option)
Then extract the firmware and add all 4 parts to ODIN 3.12.7 (Do not use ODIN 3.13.1 unless you want to flash BTU Oreo 8.0)
AP << (Takes quite a long time to add, be patient as ODIN will look frozen)
BL
CP
HOME_CSC
If you use CSC instead of HOME_CSC it will wipe the device after the flash, HOME_CSC will not wipe it
Put the phone into download mode (Home & Power & Volume Down)
Connect to PC USB and hit start on ODIN
Wait for the flash to complete (It can take quite a while) and the phone should hopefully boot back into Android
Thank you for the quick response.
It's imperative I get this right and ensure I've understood your reply correctly.
I have downloaded the following:
SM-G930F_1_20180417125627_cz5yqc22v0_fac - from SamFirm as it was much quicker like you said.
Odin3+v3.12.7 - This particular version was quite difficult to get a hold of. Various sites redirecting me to various pages without a direct link to download but I hope that is the correct one.
The firmware zip contains the following files:
AP_G930FXXS2DRDI_CL12365438_QB17789072_REV00_user_low_ship_meta.tar -------1
BL_G930FXXS2DRDI_CL12365438_QB17789072_REV00_user_low_ship.tar -------2
CP_G930FXXU2DRB6_CL648265_QB8952207_SIGNED.tar -------3
CSC_XEU_G930FXEU2DRB5_CL13061583_QB16917099_REV00_user_low_ship.tar
HOME_CSC_XEU_G930FXEU2DRB5_CL13061583_QB16917099_REV00_user_low_ship.tar -------4
I have labelled the files 1-4 in the order of flashing/installation (I presume?)
I will also follow your instruction of flashing HOME_CSC_XEU_G930FXEU2DRB5_CL13061583_QB16917099_REV00_user_low_ship.tar as this will NOT wipe any existing data on the phone?
Will following the above steps act as an upgrade to the phone and not wipe apps/pictures etc in the internal storage?
Have I missed out any other steps?
Cassie` said:
Thank you for the quick response.
It's imperative I get this right and ensure I've understood your reply correctly.
I have downloaded the following:
SM-G930F_1_20180417125627_cz5yqc22v0_fac - from SamFirm as it was much quicker like you said.
Odin3+v3.12.7 - This particular version was quite difficult to get a hold of. Various sites redirecting me to various pages without a direct link to download but I hope that is the correct one.
The firmware zip contains the following files:
AP_G930FXXS2DRDI_CL12365438_QB17789072_REV00_user_low_ship_meta.tar -------1
BL_G930FXXS2DRDI_CL12365438_QB17789072_REV00_user_low_ship.tar -------2
CP_G930FXXU2DRB6_CL648265_QB8952207_SIGNED.tar -------3
CSC_XEU_G930FXEU2DRB5_CL13061583_QB16917099_REV00_user_low_ship.tar
HOME_CSC_XEU_G930FXEU2DRB5_CL13061583_QB16917099_REV00_user_low_ship.tar -------4
I have labelled the files 1-4 in the order of flashing/installation (I presume?)
I will also follow your instruction of flashing HOME_CSC_XEU_G930FXEU2DRB5_CL13061583_QB16917099_REV00_user_low_ship.tar as this will NOT wipe any existing data on the phone?
Will following the above steps act as an upgrade to the phone and not wipe apps/pictures etc in the internal storage?
Have I missed out any other steps?
Click to expand...
Click to collapse
Almost, you must flash all 4 files at the same time, load them all into ODIN before hitting start, doesn't matter which order you load them in as long as they are all loaded before flashing
And you are correct with the rest, HOME_CSC will not wipe anything, and yes it will act as an upgrade although it is a full ROM you are flashing, to you the user, it will appear exactly the same as an upgrade as long as you use HOME_CSC
No other steps needed
I have loaded all 4 files as seen in the screenshot however, after clicking on Start, about 5 or so minutes later, it says FAIL in the first box above where it initially said RECOVERY. It's stopped and not done anything else.
I'm not sure what to do here.
I've also added a shot of the top left of odin screen
Cassie` said:
I have loaded all 4 files as seen in the screenshot however, after clicking on Start, about 5 or so minutes later, it says FAIL in the first box above where it initially said RECOVERY. It's stopped and not done anything else.
I'm not sure what to do here.
I've also added a shot of the top left of odin screen
Click to expand...
Click to collapse
Yea it's failed, you can close ODIN and disconnect now
You can try doing it again, but that should have worked, you could try downloading the latest 6.0.1 ROM and flashing that the same way first, it looks like your bootloader is version 1 where this ROM is version 2 as shown by the S2 number in the middle of the firmware version
*Detection* said:
Yea it's failed, you can close ODIN and disconnect now
You can try doing it again, but that should have worked, you could try downloading the latest 6.0.1 ROM and flashing that the same way first, it looks like your bootloader is version 1 where this ROM is version 2 as shown by the S2 number in the middle of the firmware version
Click to expand...
Click to collapse
I've gone to https://updato.com/firmware-archive-select-model?record=0DB04AD4C34211E69215FA163EE8F90B
From there I've selected the most recent 6.0.1 ROM which is dated 4th December 2016. Problem is that the download is EXTREMELY slow and I have no idea how to use SamFirm to download that particular ROM.
I guess all I can do now is play the waiting game and repeat the steps with the 6.0.1 ROM once it's downloaded.
Thank you for your responses and I will post back here once the download has finished.
Cassie` said:
I've gone to https://updato.com/firmware-archive-select-model?record=0DB04AD4C34211E69215FA163EE8F90B
From there I've selected the most recent 6.0.1 ROM which is dated 4th December 2016. Problem is that the download is EXTREMELY slow and I have no idea how to use SamFirm to download that particular ROM.
I guess all I can do now is play the waiting game and repeat the steps with the 6.0.1 ROM once it's downloaded.
Thank you for your responses and I will post back here once the download has finished.
Click to expand...
Click to collapse
Yea unfortunately all alternatives other than samfirm tool are slow, and samfirm only downloads the latest ROM
Judging by the bootloader version and the ROM version you have chosen, if this also fails, then I would assume a hardware failure
The only other thing I could suggest if this doesn't work, is to pick an older version of ODIN to flash the older firmware, ODIN 3.11.1 was used for MM 6.0.1 ROMs if I'm remembering correctly
https://forum.xda-developers.com/showthread.php?t=2711451
or
https://odindownloader.com/download/odin3-v3-11-1
I've restarted the device and it said An error has occurred while updating the device software use the emergency recovery function.
I attempted to reboot the phone a couple of times to get into recovery and I was successful. I now see the the Bootloader version is now 2 as opposed to 1. After seeing this I attempted to flash version 7 as initially suggested yet it did not work.
I'm not sure how Bootloader changed from 1 to 2 and is still failing to flash in odin. I am still waiting for the 6.0.1 ROM to download, fluctuating between 16-19 hours as of writing this response. Once it's ready I'll try and load up odin 3.11.1 as a second solution and try 6.0.1, even though Bootloader says 2.
Cassie` said:
I've restarted the device and it said An error has occurred while updating the device software use the emergency recovery function.
I attempted to reboot the phone a couple of times to get into recovery and I was successful. I now see the the Bootloader version is now 2 as opposed to 1. After seeing this I attempted to flash version 7 as initially suggested yet it did not work.
I'm not sure how Bootloader changed from 1 to 2 and is still failing to flash in odin. I am still waiting for the 6.0.1 ROM to download, fluctuating between 16-19 hours as of writing this response. Once it's ready I'll try and load up odin 3.11.1 as a second solution and try 6.0.1, even though Bootloader says 2.
Click to expand...
Click to collapse
Your ODIN screenshot looks like it managed to flash the bootloader before it failed, so it's possible you are going to need to use a version 2 ROM from now on, I have the same phone, XEU G930F and it is running Bootloader version 2 (Running the BTU Oreo 8.0 stock ROM)
But if the 7.0 Nougat ROM failed again it's looking more like a hardware issue, seems to be failing when it should be starting to flash SYSTEM (AP)
You can try flashing the 7.0 ROM section AP on it's own with ODIN 3.12.7, see if that fails immediately, if it does that's likely where the problem lies, it's not unheard of for these S7's to fail like this out of the blue, I see it maybe a couple of times a month on XDA
Only solution is to get the mainboard replaced
But yea, give 6.0.1 a shot anyway, worth a try saying as everything else has failed up to now
(Looking for mirrors for that 6.0.1 ROM, I've got it on my main machine but it is offline right now with no graphics card so I can't access any files, stuck with a laptop, I always download and save every new firmware release for this reason)
There is Samsung SmartSwitch software for Windows for the emergency firmware recovery, but it WILL wipe your phone back to factory and delete all your data (Last resort if nothing else works, although if ODIN doesn't work, I'd say hardware failure)
Right so I've managed to download the most up to date 6.0.1 ROM and attempted to flash it with ODIN V3.11.1 and it idles at the recovery.img part and fails like the previous efforts.
I'm not sure if attempting to get OREO running with the latest ODIN might work? If not then I may have to give up and do a factory reset through Samsung SmartSwitch.
It probably is a hardware failure as I had noticed the lightning bolt appearing when the phone is off whilst plugged in the charge, it take about a minute or so for the percentage bar to appear, usually it was about 2 seconds before this disaster occurred.
Cassie` said:
Right so I've managed to download the most up to date 6.0.1 ROM and attempted to flash it with ODIN V3.11.1 and it idles at the recovery.img part and fails like the previous efforts.
I'm not sure if attempting to get OREO running with the latest ODIN might work? If not then I may have to give up and do a factory reset through Samsung SmartSwitch.
It probably is a hardware failure as I had noticed the lightning bolt appearing when the phone is off whilst plugged in the charge, it take about a minute or so for the percentage bar to appear, usually it was about 2 seconds before this disaster occurred.
Click to expand...
Click to collapse
Worth a try flashing Oreo, BTU on samfirm tool will give you it for the G930F
If you're seeing problems with the charging now, you might get lucky and find the USB port is the only thing needing replacing, but if you send it off for repair it's unlikely even if that is the case that they won't just charge you for a new mainboard, you can likely get USB ports from eBay but opening the S7 isn't as straight forward as the back is glued on for IP68 water resistance and needs a heatgun to remove, not sure if anything else like the screen needs removing for USB, I've not opened mine
You've tried a new USB cable and a different PC too ?
*Detection* said:
Worth a try flashing Oreo, BTU on samfirm tool will give you it for the G930F
If you're seeing problems with the charging now, you might get lucky and find the USB port is the only thing needing replacing, but if you send it off for repair it's unlikely even if that is the case that they won't just charge you for a new mainboard, you can likely get USB ports from eBay but opening the S7 isn't as straight forward as the back is glued on for IP68 water resistance and needs a heatgun to remove, not sure if anything else like the screen needs removing for USB, I've not opened mine
You've tried a new USB cable and a different PC too ?
Click to expand...
Click to collapse
The charging issue occurred immediately when the phone shut off by itself and wouldn't power on conventionally. The phone is still under warranty so if the Samsung SmartSwitch software is unable to recover the phone then I will take it to the repair center and have them fix/replace it. If it's a case of undoing the glue and whatnot then I'd rather they give me a replacement.
I did change the USB cable to a different one, and I've attempted to flash the 2 different ODINS with the 2 different ROMS on a laptop as opposed to the desktop I was using. Still fails at the recovery.img part of ODIN.
I'm going to try Samsung SmartSwitch now and see if this will give it some life. If THAT doesn't work then it's 100% hardware issue and my data was lost to begin with.
Considering both versions of ODIN didn't work with either ROM, I don't think I'll be looking for the BTU version of OREO to attempt to install with. If there's a direct download that's quick I might but I think I'll attempt to Emergency Recover through the Samsung tool.
I want to thank you plenty for your help and knowledge on this. It certainly has been helpful and given me better understanding of the problem I'm facing and potential solutions. I have a feeling that the SmartSwitch recovery won't work either and still be posting back here hahaha.
OK I've got bigger problems on my hands now.
SmartSwitch and Kies both say "SM-G930F" does not support initializing. Please contact our service center.
I've already inputted my serial number and it gives me the same message on both programs. When I called up customer support they said my warranty is till the end of May this year.
Would the service center be able to solve this problem?
Cassie` said:
OK I've got bigger problems on my hands now.
SmartSwitch and Kies both say "SM-G930F" does not support initializing. Please contact our service center.
I've already inputted my serial number and it gives me the same message on both programs. When I called up customer support they said my warranty is till the end of May this year.
Would the service center be able to solve this problem?
Click to expand...
Click to collapse
Yea I'd get it repaired under warranty asap then if it runs out soon, they will most likely replace the mainboard I'd say, which means 100% data loss as the storage is on a chip on that board, or might even send you a new S7
Really does sound like hardware failure if all of these recovery options have failed, just keep quiet about what you've done to try and fix it, just act dumb and say it won't turn on or they could claim you nulled your warranty messing with ODIN
And no probs, that's what XDA is all about Let us know how the repair goes and buy a MicroSD card to save your important files to this time so you don't lose anything if it happens again
*Detection* said:
Yea I'd get it repaired under warranty asap then if it runs out soon, they will most likely replace the mainboard I'd say, which means 100% data loss as the storage is on a chip on that board, or might even send you a new S7
Really does sound like hardware failure if all of these recovery options have failed, just keep quiet about what you've done to try and fix it, just act dumb and say it won't turn on or they could claim you nulled your warranty messing with ODIN
And no probs, that's what XDA is all about Let us know how the repair goes and buy a MicroSD card to save your important files to this time so you don't lose anything if it happens again
Click to expand...
Click to collapse
I had an SD card inside with all my pictures I took whilst in Japan (Thank GOD!). I took it out when this issue arose to avoid potential data loss there.
As far as ODIN is concerned, warranty still appears intact but yes I'll keep hush hush when I'm there. I believe they said they'd give me a refurbished S7 if they couldn't reflash it there.
Cassie` said:
I had an SD card inside with all my pictures I took whilst in Japan (Thank GOD!). I took it out when this issue arose to avoid potential data loss there.
As far as ODIN is concerned, warranty still appears intact but yes I'll keep hush hush when I'm there. I believe they said they'd give me a refurbished S7 if they couldn't reflash it there.
Click to expand...
Click to collapse
Yes, ODIN will not void warranty if you only flash stock, but telling them you used ODIN might, it's not a tool meant for us, it's Samsung's internal flashing tool not meant to be leaked online, sometimes they'll use any reason to blame you and not have to pay out / replace it so yea best not say anything other than official recovery methods suggested by Samsung themselves, if anything at all, I'd just say I didn't do anything, an OTA update came through and it never rebooted or something
Good job with the pics, I don't save any media to the phone itself, I create folders on the SDCard and move it over if I can't have it save there automatically, that way wiping the phone is nothing but a pain to set back up again, nothing actually lost
*Detection* said:
Yes, ODIN will not void warranty if you only flash stock, but telling them you used ODIN might, it's not a tool meant for us, it's Samsung's internal flashing tool not meant to be leaked online, sometimes they'll use any reason to blame you and not have to pay out / replace it so yea best not say anything other than official recovery methods suggested by Samsung themselves, if anything at all, I'd just say I didn't do anything, an OTA update came through and it never rebooted or something
Good job with the pics, I don't save any media to the phone itself, I create folders on the SDCard and move it over if I can't have it save there automatically, that way wiping the phone is nothing but a pain to set back up again, nothing actually lost
Click to expand...
Click to collapse
I'm going to give flashing one last try.
I am currently downloading Android 8.0.0 for United Kingdom (BTU, NOT XEU). I have to head to work in a few minutes. When I get back I'll attempt to flash that without BootLoader as that will change it to version 3 and you can't downgrade from that from what I've read here and there. If that fails then it's off to the repair center. If it's some sort of hardware failure then it won't flash regardless what stock rom/ODIN version I'm using.
Not sure if BTU update with home CSC will retain my data (assuming it works)
Cassie` said:
I'm going to give flashing one last try.
I am currently downloading Android 8.0.0 for United Kingdom (BTU, NOT XEU). I have to head to work in a few minutes. When I get back I'll attempt to flash that without BootLoader as that will change it to version 3 and you can't downgrade from that from what I've read here and there. If that fails then it's off to the repair center. If it's some sort of hardware failure then it won't flash regardless what stock rom/ODIN version I'm using.
Not sure if BTU update with home CSC will retain my data (assuming it works)
Click to expand...
Click to collapse
Your CSC will remain XEU as it is Multi-CSC containing BTU, and BTU contains XEU, I'm running it now with BTU firmware & XEU CSC
Bootloader for this Oreo 8.0 BTU firmware is still 2, with it being a new Android version you'll need to flash the BL too anyway
*Detection* said:
Your CSC will remain XEU as it is Multi-CSC containing BTU, and BTU contains XEU, I'm running it now with BTU firmware & XEU CSC
Bootloader for this Oreo 8.0 BTU firmware is still 2, with it being a new Android version you'll need to flash the BL too anyway
Click to expand...
Click to collapse
I've had no luck flashing it with Oreo. It's definitely going to the repair centre. Such a shame.
I'm very grateful for your time and help with this. I will report back this weekend with the results of what the repair centre will do regarding the device. Don't like to leave a thread without an end result.
Many thanks again!
Here is what I did so far to get here.
First I followed the guide to root my phone, and to be honest, all was perfect. I had to restore stock rom cause my first few tries failed. But seems I flashed a rom for a different provider. It worked anyway, but I don't have my sim card in that phone, it's temporarily in another device.
I had a little issue in settings, where battery was coming up two times in the list. That bugged me, I wanted to restore the rom and see if a full restore would take care of this issue, but somehow, after I installed twrp and rooted my phone, I can no longer flash anything stock with odin, it fails.
If I try to flash the AP tar.md5 file, it fails when it gets to system. And then after rebooting, I see this message:
"An error has occurred while updating the device software. Use the emergency recovery function in the Smart Switch PC Software"
I tried installing smart switch and kies, and both software doesn't detect my device in download mode or twrp (obviously)...
So to get rid of the emergency message, I flashed twrp again with odin, and been successful. If I tried to flash the AP image again, or CSC, it fails. And then I get the message back.
After flashing twrp, I'm stuck in a boot loop. Would need to restore system I think, but cannot seem to be able to do it with Odin.
Any possible way to recover my device?
Update: Turns out I must have made a mistake with the firmware I thought I had flashed, versus the one I was trying to flash and was failing. I downloaded the latest october firmware and it's currently flashing in odin!
This not be posted in development !
mchlbenner said:
This not be posted in development !
Click to expand...
Click to collapse
Sorry about that, I thought it was related to the topic. Obviously, you saw that I do not have a thousand posts around here, a wise thing to do would have been to suggest me where should I have posted this, and how can I move my thread around? Do I wait for a mod to move it himself?
pleclair said:
Here is what I did so far to get here.
First I followed the guide to root my phone, and to be honest, all was perfect. I had to restore stock rom cause my first few tries failed. But seems I flashed a rom for a different provider. It worked anyway, but I don't have my sim card in that phone, it's temporarily in another device.
I had a little issue in settings, where battery was coming up two times in the list. That bugged me, I wanted to restore the rom and see if a full restore would take care of this issue, but somehow, after I installed twrp and rooted my phone, I can no longer flash anything stock with odin, it fails.
If I try to flash the AP tar.md5 file, it fails when it gets to system. And then after rebooting, I see this message:
"An error has occurred while updating the device software. Use the emergency recovery function in the Smart Switch PC Software"
I tried installing smart switch and kies, and both software doesn't detect my device in download mode or twrp (obviously)...
So to get rid of the emergency message, I flashed twrp again with odin, and been successful. If I tried to flash the AP image again, or CSC, it fails. And then I get the message back.
After flashing twrp, I'm stuck in a boot loop. Would need to restore system I think, but cannot seem to be able to do it with Odin.
Any possible way to recover my device?
Click to expand...
Click to collapse
You forgot to flash all of them
BL, AP, CP, CSC
pleclair said:
Sorry about that, I thought it was related to the topic. Obviously, you saw that I do not have a thousand posts around here, a wise thing to do would have been to suggest me where should I have posted this, and how can I move my thread around? Do I wait for a mod to move it himself?
Click to expand...
Click to collapse
Just because you have a lot of post you don't post question in development section.
587.saboor said:
You forgot to flash all of them
BL, AP, CP, CSC
Click to expand...
Click to collapse
I did flashed all of them. But it always fails. No matter if I select only BL, AP, CP, CSC... or all of them. Almost seems like twrp is preventing write or something else does.
It fails after a few seconds in the process. Is there any kind of log generated by odin? If so, where can I find it? I don't see much information beside that it fails.
OEM unlock checked in dev options?
USB debuging checked? these were always the go to mischecks...
back when I had the galaxy a5 2017 520W canada unit I flashed a european rom to see if FM radio was going to work. it Worked, but I had the simular issue with battery showing up twice AND I ended up tripping knox while doing it. phone seemed to work fine other then that issue and the radio worked as well.
Flashed it back to 520W stock... later sold the phone... no issues. perhaps it was different with nougat
supertac said:
OEM unlock checked in dev options?
USB debuging checked? these were always the go to mischecks...
back when I had the galaxy a5 2017 520W canada unit I flashed a european rom to see if FM radio was going to work. it Worked, but I had the simular issue with battery showing up twice AND I ended up tripping knox while doing it. phone seemed to work fine other then that issue and the radio worked as well.
Flashed it back to 520W stock... later sold the phone... no issues. perhaps it was different with nougat
Click to expand...
Click to collapse
Yeah, I have those two checked. For some reasons, I was tired that night, and was actually trying to flash 7.1.1 firmware, while having already upgraded to 8.0. So I believe this operation wasn't getting thru because of that. I was tired, and picked the wrong folder, and flashed 7.1.1. Well, I was trying to flash, but it kept failing, but had a tiny bit done, enough to screw this up like this.
When I picked the right folder, 8.0, then it worked.
As for tripping knox, you probably tripped it while flashing twrp. I believe it trips it, haven't heard of a way to do it.
pleclair said:
Yeah, I have those two checked. For some reasons, I was tired that night, and was actually trying to flash 7.1.1 firmware, while having already upgraded to 8.0. So I believe this operation wasn't getting thru because of that. I was tired, and picked the wrong folder, and flashed 7.1.1. Well, I was trying to flash, but it kept failing, but had a tiny bit done, enough to screw this up like this.
When I picked the right folder, 8.0, then it worked.
As for tripping knox, you probably tripped it while flashing twrp. I believe it trips it, haven't heard of a way to do it.
Click to expand...
Click to collapse
nope. NEVER flashed twrp once on the A5- the european firmware tripped it on the 520W