[Guide] Root Pixel 3 XL Android 12 Unlock/Lock Bootloader + Install/Flash Custom ROMs
Introduction
This Guide is for Pixel 3 XL owners that want to Instal a Custom ROM, and enjoy the benefits of rooting it. The Guide is divided into three parts: Information, Instructions, and Other.
~ ~ ~ Part I - INFORMATION ~ ~ ~
Disclaimer
I assume no responsibility for the malfunctioning/bricking of your phone.
The order of listed items i.e., Custom Kernels, Custom ROMS, etc. Does not indicate my preference for them. It is your responsibility to do the research before selecting an item.
Prerequisites
A Pixel 3 XL phone with an unlocked bootloader.1
A Computer with the latest working SDK Platform-tools 33.0.3 installed.
Important Notes:
a. Before installing SDK Platform-tools, check for older versions of fastboot on your computer: Open a Command prompt and type fastboot --version at the prompt. If a adb/fastboot is found delete the folder containing them. Also, check the path environment for paths to them and remove it.
b. Update Platform Tools, regularly, for optimal performance.
c. Need Google's USB Drivers for your Pixel Phone?
Before installing SDK Platform-tools, check for older versions of fastboot on your computer: Open a Command prompt and type fastboot --version at the prompt. If a adb/fastboot is found delete the folder containing them. Also, check the path environment for paths to them and remove it.
Update Platform Tools, regularly, for optimal performance.
Need Google's USB Drivers for your Pixel Phone?
NEW
Waiting . . .
Update(s)
Magisk Alpha - app-release_709f25f6-26101.apk 12 Apr
Magisk Beta - Magisk v26.1.apk 11 Apr
Magisk Canary - app-release_a8c4a33e-26103.apk 23 Jun
Magisk Cygisk - Click Pages 5 for installation Instructions.
Magisk Delta -
app-release
Magisk Stable - Magisk v26.1.apk 11 Apr
SafetyNet - Displax's SafetyNet Fix, v2.4.0-MOD_1.3 17Jun
SDK Platform-tools 33.0.3 Aug 2022
Custom Kernels
Note: If you want to use a Custom Kernel, please follow the Installation instructions in the OP of the Custom Kernel you want to install.[[/I][/U]a. Google Pixel 3 XL ROMs, Kernels, Recoveries, & Otherb. ElementalX Kernel Manager
My Other Guides
Pixel 7 Pro
Pixel 6
Pixel 5
Pixel 4a (5G)
Pixel 4 XL
Pixel 1 XL
Credits/Thanks/Recognitions
Those I may have, inadvertently, forgotten.
~ ~ ~ Part II - INSTRUCTIONS ~ ~ ~
(The Instructions listed below are not steps, they are individual sets of instructions.)
Unlock Bootloader/Return Phone to Stock/Lock Bootloader
Unlock Bootloader
Notes:
This will erase all user data from the device!
Backup your data
Activate Developer Options: Tap Settings > About Phone > Tap Build Number 7 times or until you see you are a Developer. Tap back > System > Advanced > Developer Options. Enable OEM Unlock and, USB Debugging.
Boot fastboot mode
Connect the phone to the Computer with USB cord.
Open a Command Prompt on your computer and type fastboot flashing unlock and press enter.
You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
Allow the process to complete and then type fastboot reboot at the Command Prompt and press enter.
When your phone reboots disconnect your usb cable.
Notes:
After unlocking your bootloader, you'll see a warning: The bootloader is unlocked and... You will see this warning until, you relock the bootloader.
Do not relock your bootloader until you have returned the device to Stock.
Return Phone to Stock
Backup your data/Internal storage
Use the Android flash tool:
select Wipe => Force Flash Partitions => Lock Bootloader.
Lock Bootloader
If your phone is not 100 percent stock do Return Phone to Stock. If you don't you may brick your phone.
This will erase all user data from the device!
Boot fastboot mode
Open a Command Prompt in the SDK Platform- tools folder, and type this at the Prompt: fastboot flashing lock
You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
Allow the process to complete, then type this at the Command Prompt: fastboot reboot
Enable Developer Options: Settings > About phone > Tap Build number 7 times or until you see 'you are a developer'.
Tap Back > Developer options and toggle OEM Unlock off.
Install/Update Factory Image keep data or wipe data
Important Note(s):
If you haven't updated your phones Factory image in awhile. It is not necessary to flash all the images in succession. Flash the latest Factory image.
If you are uncomfortable manually flashing the factory image, Try installing it with PixelFlasher, a GUI tool for flashing / updating / rooting / managing Pixel phones..
If the previous factory image was rooted (you used Magisk to patch the boot.img of the previous factory image). Open Magisk manager and disable all Magisk modules.
If you want to Upgrade to Android 13 or update the Factory Image without wiping your phone: Do Flash Factory Image Keep Data (below).
Always verify you have the latest version of SDK Platform-Tools installed on your computer before installing the Factory Image: Pixel 3 XL - crosshatch.
If you get an error: while flashing, try one of these options:
Change the USB port to a non charging USB port.
Change the USB cord.
Change Computers.
If you phone bootloops
Press the Power button until the phone turns off.
Press the Power and Volume Down to boot the bootloader.
Open a Command Prompt in the SDK-Platform-tools folder or the folder that has adb.exe in it, and type adb wait-for-device shell magisk --remove-modules
Then type: fastboot Reboot
If you are uncomfortable manually flashing the factory image. Try PixelFlasher by badabing2003.
Please post Comments/Discussions/Questions about PixelFlasher on that thread.
Backup your data
Download the latest Factory Image: Pixel 3 XL - crosshatch to your Computer.
Go to Part II - INSTRUCTIONS => 4. Extract Files from the FactoryImage/Flash boot.img and extract the flash-all.bat file.
Flash Factory Image Keep Data
Navigate to the folder you extracted the Factory Image to and open the flash-all.bat file with a file editor i.e., Notepad app and edit the flash-all.bat file:
Change this line: fastboot -w update image-crosshatch-aa1a.999999.999.zip
to this: fastboot update image-crosshatch-tp1a.999999.999.zip
Note: This removes the -w so your Internal Storage will NOT be wiped.
After, you have edited the flash-all.bat file. Copy/Move these files to the [U[Platform-tools[/U] folder:
bootloader-crosshatch-....img
flash-all.bat
image-crosshatch-....zip
radio-crosshatch-....img
On your phone: Boot the bootloader (Power off the phone => Press the Power and Down buttons until you see Start)
Connect your phone to the computer.
Open a Command Prompt on your computer in the Platform-tools folder and type: flash-all at the Command Prompt and press enter.
The phone will reboot when flashing is complete.
Go-to Part II - INSTRUCTIONS => 5. Root/Reroot with Magisk and Pass SafetyNet, • Patching the boot.img - to root/reroot.
Flash Factory Image Wipe Data
This will wipe your phone's Internal Storage.
Open the folder you extracted the Factory Image to and Copy/Move these files to the Platform-tools folder:
bootloader-crosshatch-....img
flash-all.bat
image-crosshatch-....zip
radio-crosshatch-....img
On your phone: Boot the bootloader (Power off the phone => Press the Power and Down buttons until you see Start)
Connect your phone to the computer.
Open a Command Prompt on your computer in the Platform-tools folder and type: flash-all at the Command Prompt and press enter.
The phone will reboot when flashing is complete.
Setup phone
Enable Developer Mode and USB Debugging
Setup => About phone => Tap Build number 7 times or untill you see you are a 'Developer'.
Setup => System => Developer options => Enable Developer options => enable USB Debugging
Go-to Part II - INSTRUCTIONS => 5. Root/Reroot with Magisk and Pass SafetyNet, • Patching the boot.img - to root/reroot.
(NEW) Make Both Slots Bootable: Manually, Flash the OTA Image to Both Slots - One bootable and rooted, the other slot bootable without root.
Before you start
Backup your data
Make sure that there is no pending OTA update, by going to Settings > About phone > System updates, which should say Your system is up to date.
Download the latest Factory and OTA image for your device.
Verify the checksum of the Factory and OTA image. The last portion of the filename is the first 8 digits of its SHA-256 checksum; the full SHA-256 checksum is shown next to the download link.
Extract the boot/init_boot.image from the Factory image:
Extract the Factory Image file that you downloaded (crosshatch-a9a9a.999999.999-factory-99a9a99a.zip) into a folder.
Open the folder you extracted the Factory image to and extract the Image file (image-crosshatch-aa9a.999999.999.zip) into a folder. The stock boot/init_boot.img file should be in this folder.
Patch the boot/init_boot.img:
Open the Magisk Alpha/Beta/Canary/Delta/Stable App
The Update Channel should be set to Alpha/Beta/Canary/Delta/Stable, depending on the version you installed.
Tap Install (next to Magisk)
Tap, Select and Patch a File
Select the boot/init_boot.img file you extracted from the factory image.
Tap the ✓ (Check Mark)
Tap Let's Go
When you see done, the boot/init_boot.img has been patched (magisk_patched_xxxxxx.img), and is stored in the download folder.
Reboot
Copy/Move the magisk_patched....img file to your computer's Platform-tools folder or the folder that has fastboot.exe in it:
Boot Recovery mode
With the device powered on and USB debugging enabled, type: adb reboot recovery
If you're unable to use adb to reboot into recovery, you can use the key combination for your device: Press and hold Volume Down button, then press and hold Power button then use the Volume Down/Up button to select the Recovery option from the menu.
The device is now in recovery mode an Android logo with red exclamation mark should be on the screen.
Access the recovery menu:
Hold the Power button and press Volume button up once. The recovery text menu will appear.
Enter sideload mode:
Select the Apply update from ADB option from the recovery text menu
Run the following command: adb devices check that your device shows up with "sideload" next to its name.
Sideload the OTA zip file
Connect the phone to the PC via USB cable
On the phone: boot bootloader/fastboot mode
On the PC:
Open a command prompt in the SDK Platform-tools folder.
Type:
adb sideload crosshatch-ota-tq3a.230605.012-f32168af.zip and press enter.
Once sideloading finishes, reboot the phone by choosing Reboot system now option on the The recovery text menu.
Sideload the OTA zip file to the other slot and Root it.
Boot Recovery mode
With the device powered on and USB debugging enabled, type: adb reboot recovery
If you're unable to use adb to reboot into recovery, you can use the key combination for your device: Press and hold Volume Down button, then press and hold Power button then use the Volume Down/Up button to select Recovery option from the menu.
The device is now in recovery mode an Android logo with red exclamation mark should appear on screen.
Access the recovery menu:
Hold the Power button and press Volume up button once.
The recovery text menu will appear.
Enter sideload mode:
Select the Apply update from ADB option on the recovery text menu.
[*]Sideload the OTA zip file
Connect the phone to the PC via USB cable
On the phone: boot bootloader/fastboot mode
On the PC:
Open a command prompt in the SDK Platform-tools folder.
Type: adb sideload crosshatch-ota-tq3a.230605.012-f32168af.zip at the prompt and press enter.
Once sideloading finishes, choose Reboot system now option on the The recovery text menu.
Flash boot/init_boot.img to root
On the phone: Boot bootloader/fastboot mode
Connect the phone to the Computer with USB cord.
On the PC:
Open a Command Prompt in the SDK Platform-tools folder.
Type: fastboot flash boot/init_boot magic_patched....img at the Prompt and press enter.
Type: fastboot reboot at the Prompt and press enter.
Disconnect the phone from the PC.
Notes:
This slot is bootable and rooted. The other slot is bootable without root.
Check that the other slot is bootable and not rooted
On the Phone: Boot bootloader/fastboot mode
Connect the phone to the PC via USB cable
On the PC:
Open a command prompt in the SDK Platform-tools folder.
Type: fastboot --set-active=other at the prompt and press enter.
Type: fastboot reboot and press enter.
Disconnect the phone from the PC.
To return to the other slot that is bootable and rooted
On the Phone: Boot bootloader/fastboot mode
Connect the phone to the PC via USB cable
On the PC:
Open a command prompt in the SDK Platform-tools folder.
Type: fastboot --set-active=other at the prompt and press enter.
Type: fastboot reboot and press enter.
Disconnect the phone from the PC.
Done!
Extract Files from Factory Image/Flash boot.img
Extract Files from Factory Image
Extract flash-all.bat and boot.img file
Download the latest Factory image to your phone.
Extract the Factory Image file (crosshatch-r2d1a.999999.999-factory-99a9a99a.zip) to a folder. The, stock, flash-all.bat file should be in this folder.
Open the folder you extracted the Factory image to and, extract the Image file (image-crosshatch-aa9a.999999.999.zip) into the folder. The, stock, boot.img file should be in this folder.
Flash boot.img
Flashing the boot.img removes root.
Open the folder you extracted the 'image...zip' file to and copy the boot.img file to your computer's platform-tools folder or to the folder that has fastboot.exe in it.
Boot fastboot mode
Connect the phone to the Computer
Open a Command Prompt and type the following command at the prompt:
fastboot flash boot --slot all boot.img
Reboot
Pass SafetyNet with Magisk moduke.
Pass Safety Net with SafetyNet Fix with Magisk module
Download File(s)
Displax's latest SafetyNet Fix, a "fork" of kdrag0n safetynet-fix.
These are the NEW Magisk Module repositories:
Androidacy Module Manager
Androidacy Module Manager - Releases
Androidacy Download Center
This is the old Magisk Module repository:
https://github.com/Fox2Code/Fox Magisk Module Manager
Install Displax's safetyNet Fix
Open Magisk
Tap Modules icon
Tap Install from storage
Navigate to the Displax's SafetyNet Fix file you downloaded.
Tap the Displax's SafetyNet Fix file.
Tap the check mark (✓ at the bottom) to start the installation.
After it installs tap the Save icon to save the log
Tap Reboot.
Settings for Magisk Canary
Open Magisk App
Tap the Setup icon.
Scroll down to App and set the Update Channel to Canary.
Scroll down to Check Updates and enable it.
Scroll down to Magisk and enable Zygisk.
Enable Denylist
Tap Configure DenyList => Tap 3 Dot Menu => Check ✓ Show system apps => Check ✓ Google Play Store, Google Pay, Google Wallet etc.
(Optional) Scroll down to Superuser and enable Enable Biometric Authentication.
Get Device Certified
Turn Airplane mode on
Open Settings
Tap Apps & notifications
Tap see all...
Tap three dot menu
Tap Show system
Scroll to Google Play Store
Tap Storage and Cache
Tap Clear storage
Note: Repeat the 3 steps above for any app that needs Device Certification i.e., Google Play Services, Google Pay, Google Wallet, etc.
reboot
Turn Airplane mode off
Check Device Certification
Open Google Play Store app
Tap Menu - Circle top right
Tap Settings
Tap About
Check Play protect certification
It may take 24 hours for Device Certification to be updated.
Note: If after completeting Get Device Certified and Check Device Certification you've waited 24 hours your Device is not Certifed or your Device is Certified and certain Google Store apps (Google Pay, NetFliks, etc.) are not working. Use the Play Integrity API Checker app or the TB Checker - Safetynet and Root app to verify you are passing Play Integrity.
Set Magisk App Update Channel/Update Magisk
Set Magisk App Update Channel
Open Magisk App > Tap Settings icon > Update Channel > Select Stable, Beta, Canary or Custom.
Update Magisk
When Magisk App notifies you of an update:
Tap install.
Select, Direct Install (Recommended)
When it finishes installing
Tap, Save Log
Log location: /storage/emulated/0/Download
Tap, Reboot
Done!
Install/Update Magisk Modules
Download File(s)
Displax's latest SafetyNet Fix, a "fork" of kdrag0n safetynet-fix.
These are the NEW Magisk Module repositories:
Androidacy Module Manager
Androidacy Module Manager - Releases
Androidacy Download Center
This is the old Magisk Module repository:
https://github.com/Fox2Code/Fox Magisk Module Manager
LSposed Releases
Shamiko Releases
Install Modules from Storage
Open Magisk
Tap the Modules icon
Tap Install from storage
Navigate to the folder with the Module you want to install.
Tap the Module to highlite it and tap Select.
After it installs, tap the Disc Icon to save the install log.
Tap Reboot
Install Modules from Androidacy Module Manager
Open Androidacy Module Manager
Tap the Modules icon
Locate the Module you want to install
Tap Install
After it installs, tap the Disc Icon to save the install log.
Tap Reboot
Update Modules
Open Androidacy Module Manager
You, will see the Modules that have Updates.
Tap the Module you want to update.
Tap install.
After it installs, tap the Disc Icon to save the install log.
Tap Reboot
Open a Command Prompt/Boot Fastboot Mode/Boot Recovery
Open a Command Prompt on Computer
Open File Explorer, click the platform-tools folder ==> click the folder icon (left side of address bar) to highlight it type cmd and press enter.
Open a Powershell Command Prompt on Computer: Open File Explorer, click the platform-tools folder ==> click the folder icon (left side of address bar) to highlight it type powershell and press enter.
Notes:
Enable USB Debugging, on your phone: Settings ==> System ==> Advanced ==> Developer options ==> Scroll down to USB debugging and enable it.
When using the Powershell Command Prompt Commands must be preceeded with ./: i.e, ./fastboot devices
If you do not want to open a Command Prompt every time you want to use the fastboot command, add the path to the Platform-tools folder to Windows environment variables.
Boot fastboot mode (bootloader):
Power off phone, press and hold the power and volume down buttons until you see Start.
Boot Recovery
Power off phone, press and hold the power and volume down buttons until you see Start. Use volume up/down button until you see Recovery mode. Press power button.
Test fastboot
Enable Developer Options - Tap Settings > About phone > Build number 7 times or until you should see 'you are a Developer'.
Enable USB Debugging - Tap Settings > System > Advanced > Developer options >
Enable USB Debugging.
Open a Command Prompt on your computer in the Platform-tools folder.
Boot fastboot mode on your phone
Connect the phone to the Computer.
At the prompt type: fastboot devices to verify communication with phone. It should return your phone's serial number.
ADB Sideload
Stock Recovery
Full OTA Images for Nexus and Pixel Devices - Updating instructions
Custom Recovery TWRP
Waiting for Android 11 (R) T.W.R.P
~ ~ ~ Part III - OTHER ~ ~ ~
Custom ROMs
Need help with a Custom ROM?
If you are trying to install or have installed a Custom ROM, read and follow the Installation Instructions in the OP of the Custom ROM thread or try installing it with PixelFlasher, a GUI tool for flashing / updating / rooting / managing Pixel phones..
Search the thread of the Custom ROM you are trying to install or have installed for answer(s)/solution(s) to your question(s)/problem(s): If you don't find a answer(s)/solution(s) to your question(s)/problem(s). Post your question(s)/request(s) for help in the Custom ROM thread you are trying to install or have installed.
If you are trying to install a Addon(s) {Custom Kernel, Magisk, etc.} to the Custom ROM you installed: Search the thread of the Custom ROM you installed or the thread of the Addon you want to add to your Custom ROMfor answer(s)/solution(s) to your question(s)/problem(s). If you don't find an answer(s)/solution(s) to your question(s)/problem(s). Post your question(s)/request(s) for help in the Custom ROM or Addon (Custom Kernel, Magisk, etc.) thread.
ROMs
Google Pixel 3 XL ROMs, Kernels, Recoveries, & Other
Other Custom ROMs
[ROM] [Android 13] [blueline/crosshatch] ArrowOS 13.0 | UNOFFICIAL | BETA by ReallySnow
Themes, Apps, and Mods
Google Pixel 3 XL Themes, Apps, and Mods
T.W.R.P.
Android 12 - 370_12.0... 10Oct
Attempted the update last night, when flashing Magisk Canary Patched boot.img, the touchscreen is non-responsive on boot.
Flashing the stock boot.img and the touchscreen works.
Tried flashing the full image (no -w) and OTA with same result both times. Tried switching between active slots as well, no dice.
Any ideas?
JONBOY345 said:
Attempted the update last night, when flashing Magisk Canary Patched boot.img, the touchscreen is non-responsive on boot.
Flashing the stock boot.img and the touchscreen works.
Tried flashing the full image (no -w) and OTA with same result both times. Tried switching between active slots as well, no dice.
Any ideas?
Click to expand...
Click to collapse
Are you using:
- Magisk 20-4.zip (Stable)?
- Magisk Manager Canary 424 to patch September 2020 boot.img?
Homeboy76 said:
Are you using:
- Magisk 20-4.zip (Stable)?
- Magisk Manager Canary 424 to patch September 2020 boot.img?
Click to expand...
Click to collapse
Yes. Using Magisk 20-4.zip stable, but I've not used that zip in anyway...
Magisk Manager app is Canary from: https://github.com/topjohnwu/magisk_files/find/canary?q= and using it to patch the boot.img
Also updated platform tools to latesst.
JONBOY345 said:
Yes. Using Magisk 20-4.zip stable, but I've not used that zip in anyway...
Magisk Manager app is Canary from: https://github.com/topjohnwu/magisk_files/find/canary?q= and using it to patch the boot.img
Also updated platform tools to latesst.
Click to expand...
Click to collapse
Ok. I guess it's the Gremlins are preventing it from working.
Seriously, I don't know why it is not working.
Maybe @sliding_billy has some advice.
Homeboy76 said:
Ok. I guess it's the Gremlins preventing it from working.
Seriously, I don't know why it is not working.
Maybe @sliding_billy has some advice.
Click to expand...
Click to collapse
For giggles, can anyone share a patched boot.img?
JONBOY345 said:
For giggles, can anyone share a patched boot.img?
Click to expand...
Click to collapse
Sure, Let me know if this works for you!
Edit: posted an actual patched img. Grabbed the wrong file at first
https://drive.google.com/file/d/13VhMOr3XqFsIQUmZo3sG3LRATlV-hju8/view?usp=sharing
laxattack said:
Sure, Let me know if this works for you!
https://drive.google.com/file/d/1dcXyMv0sttfyGno496Tbo6MFuUIuii2w/view?usp=sharing
Click to expand...
Click to collapse
Hmm. That one didn't work. It booted, touchscreen worked, but no root.
For giggles I reran by steps again this morning, and now the new Magisk patched image works.
Here's a link: https://drive.google.com/file/d/127G2MZ_Jq8cPPKs50rtTiOijSkk7DbtU/view?usp=sharing
I noticed that your patched image is 67.1MB, while the one that Magisk created/patched on my phone (and I uploaded just above), is only 32.8MB...
Thanks for your help!
JONBOY345 said:
Hmm. That one didn't work. It booted, touchscreen worked, but no root.
For giggles I reran by steps again this morning, and now the new Magisk patched image works.
Here's a link: https://drive.google.com/file/d/127G2MZ_Jq8cPPKs50rtTiOijSkk7DbtU/view?usp=sharing
I noticed that your patched image is 67.1MB, while the one that Magisk created/patched on my phone (and I uploaded just above), is only 32.8MB...
Thanks for your help!
Click to expand...
Click to collapse
I uploaded the wrong one at first and edited my original post, lol sorry about that
Is anyone that is on latest android 11 able to use Google Pay? Mine won't work and CTS Profile fails safetynet check. Bootloader is unlocked but not rooted.
Homeboy76 said:
Ok. I guess it's the Gremlins are preventing it from working.
Seriously, I don't know why it is not working.
Maybe @sliding_billy has some advice.
Click to expand...
Click to collapse
JONBOY345 said:
Hmm. That one didn't work. It booted, touchscreen worked, but no root.
For giggles I reran by steps again this morning, and now the new Magisk patched image works.
Here's a link: https://drive.google.com/file/d/127G2MZ_Jq8cPPKs50rtTiOijSkk7DbtU/view?usp=sharing
I noticed that your patched image is 67.1MB, while the one that Magisk created/patched on my phone (and I uploaded just above), is only 32.8MB...
Thanks for your help!
Click to expand...
Click to collapse
Sorry I missed all this. I just got back in front of a computer and got no emails of the @ mention. Is everything working now? My two thoughts for what it's worth would have been to sideload the OTA twice so that it hit both slots and to be sure to update the Magisk path to canary after installing the .apk and then to be sure to update magisk after changing the path.
berndt_toast said:
Is anyone that is on latest android 11 able to use Google Pay? Mine won't work and CTS Profile fails safetynet check. Bootloader is unlocked but not rooted.
Click to expand...
Click to collapse
are you using a custom kernel to hide the unlocked bootloader?
laxattack said:
are you using a custom kernel to hide the unlocked bootloader?
Click to expand...
Click to collapse
Nope, I was on stock. I realized that I wasn't using any rooted apps anymore, so the need to have my bootloader unlocked was null and void. I re-locked my bootloader and now google pay works like a charm.
I'll add my observation here:
OTA update via magisk OTA update method works, but for some reason I kept having frozen screen after a few minutes usage. Rebooted at least 4-5 times and it worked.
I was using Taichi and its Magisk module doesn't work. Reflashing the module causes bootloop.
So I flashed again factory image without "-w", booted fine. But installing root via magisk_patched.img from R boot.img causes bootloop.
Don't understand why.
EDIT: Is there a way to clean up magisk modules now that I am on stuck on bootloader whenever I flash magisk_patched.img?
ultimatepichu said:
I'll add my observation here:
OTA update via magisk OTA update method works, but for some reason I kept having frozen screen after a few minutes usage. Rebooted at least 4-5 times and it worked.
I was using Taichi and its Magisk module doesn't work. Reflashing the module causes bootloop.
So I flashed again factory image without "-w", booted fine. But installing root via magisk_patched.img from R boot.img causes bootloop.
Don't understand why.
EDIT: Is there a way to clean up magisk modules now that I am on stuck on bootloader whenever I flash magisk_patched.img?
Click to expand...
Click to collapse
Tulsadiver's [Guide] Magisk Modules Disabler for Modules gone wrong by tulsadiver would fix it. I don't know if he has had the time to update it for Android 11 (R).
Maybe Support Safe Mode detection would help.
Do you have to use Magisk canary with Android 11? I just updated to 11, lost root, and want to add it back.
Thanks,
Rick
C5Longhorn said:
Do you have to use Magisk canary with Android 11? I just updated to 11, lost root, and want to add it back.
Thanks,
Rick
Click to expand...
Click to collapse
Magisk Canary Manager 20424
Yes!
I upgraded from like June 2020 build to 11 via OTA, do I just have to sideload patched boot.img as I always have been for previous monthly Android 10 updates? The only difference is using the canary version of Magisk (i'm on stable channel at the moment)
walle4893 said:
I upgraded from like June 2020 build to 11 via OTA, do I just have to sideload patched boot.img as I always have been for previous monthly Android 10 updates? The only difference is using the canary version of Magisk (i'm on stable channel at the moment)
Click to expand...
Click to collapse
pretty much
Android 11, Magisk & SafetyNet
berndt_toast said:
Is anyone that is on latest android 11 able to use Google Pay? Mine won't work and CTS Profile fails safetynet check. Bootloader is unlocked but not rooted.
Click to expand...
Click to collapse
I lost root when I upgraded to Android 11 Beta and I forgot to uninstall Magisk beforehand. I left it that way with the Magisk Manager app still installed because I didn't want to do a full wipe. I didn't have any SafetyNet problem until I took the latest rp1a.200720.009 OTA and got a warning message on the first boot. I decided to try installing the latest Canary Magisk again by sideloading the patched boot.img and now I have root again and can pass the SafetyNet check.
Related
[Guide] Root Pixel 3 XL Android 11 (R) Unlock/Lock Bootloader + Install Stock Images/Systemless Root2021
Android Security Bulletin—June 2021
Pixel Update Bulletin—June 2021
Introduction
This Guide is for Pixel 3 XL owners that want to Root their phone, and enjoy the benefits of rooting it without installing a Custom ROM. However, for those that just can't live without a Custom ROM, take a look at 'Custom ROMs for Pixel 3 XL'.
This Guide also works for Pixel 3 owners: If, they download the Pixel 3 files.
New
Android 12 Developer Preview - Beta 2
Factory Images: Downloads for Google Pixel 06/09
OTA Images: Apply a device OTA image 06/09
CalyxOS
GrapheneOS
Update(s)
Factory/OTA Images - 06/07
Magisk Stable - Magisk-23.0 05/12
Magisk Beta - Magisk-23.0 05/12
Magisk Canary - Magisk-23xxx
TWRP - Waiting for Android 11 (Q) TWRP
SafetyNet - SafetyNetFix v1.1.1 01/16
SDK Platform-tools - r31.0.2 April
Custom Kernels
ElementalX (Check his Kernel Manager for latest update.)
Kirisakura v3.0.8_R 06/11
Custom ROMs
[ROM][11][OFFICIAL] lineage-18.1 for Pixel 3/XL (blueline/crosshatch) - Nightly by razorloves
[OFFICIAL][11]ScorpionROM v4.x 05/04
Disclaimer
I assume no responsibility for the malfunctioning/bricking of your phone.
The order of listed items i.e., Custom Kernels, Custom ROMS, etc. Does not indicate my preference for them. It is your responsibility to do the research before selecting an item.
Prerequisites
A Pixel 3 XL phone with an unlocked bootloader.
The latest Android 11 (R) Factory or OTA Image: "crosshatch" for Pixel 3 XL
Factory Image
11.0.0 (RQ3A.210605.005, Jun 2021)
Which one should I use?
OTA Image
11.0.0 (RQ3A.210605.005, Jun 2021)
Which one should I use?
Computer - With the latest SDK Platform-Tools: r31.0.2 installed.
Important: Update Platform Tools, regularly, for optimal performance.
Other Pixel XL Guides
[Guide] Pixel 4 XL Android 11 (R)
Credits/Thanks/Recognitions
@topjohnwu - Magisk Canary
@sliding_billy - His help editing this thread.
Those I may have, inadvertently, forgotten.
Index
(NOTE: Numbers 1-11 are not steps, they are individual sets of instructions).
Open a Command Prompt/Boot Fastboot Mode/Boot Recovery
Open Command Prompt on Computer
Option 1 - Open File Explorer, click the platform-tools folder, press shift, right click, and select open command prompt here.
Option 2 - Open File Explorer, click the platform-tools folder, highlight the directory information in the address bar or click the folder (left side of address bar) to highlight it type cmd and press enter.
Notes:
If your computer only has 'open powershell here' in the context menu. Use option 2.
If you do not want to open a Command Prompt every time you want to use fastboot, Add the path to the Platform-tools folder to Windows environment variables.
Boot fastboot mode:
Power off phone, press and hold the power and volume down buttons until you see Start.
Boot Recovery
Power off phone, press and hold the power and volume down buttons until you see Start. Use volume up/down button until you see Recovery mode. Press power button.
Test fastboot
Enable Developer Options - Tap Settings > About phone > Build number 7 times or until you should see 'you are a Developer'.
Enable USB Debugging - Tap Settings > System > Advanced > Developer options >
Enable USB Debugging.
Open a Command Prompt on your computer in the Platform-tools folder.
Boot fastboot mode on your phone (#1)
Connect the phone to the Computer.
At the prompt type: fastboot devices to verify communication with phone. It should return your phone's serial number.
Unlock Bootloader/Return Phone to Stock/Lock Bootloader
Unlock Bootloader
This will erase all user data from the device!
Backup your data
Activate Developer Options: Tap Settings > About Phone > Tap Build Number 7 times or until you see you are a Developer. Tap back > System > Advanced > Developer Options. Enable OEM Unlock and, USB Debugging.
Boot fastboot mode
Connect the phone to the Computer with USB cord.
Open a Command Prompt on your computer and type fastboot flashing unlock and press enter.
You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
Allow the process to complete and then type fastboot reboot at the Command Prompt and press enter.
When your phone reboots disconnect your usb cable.
After unlocking your bootloader, every time you reboot you'll see a warning: You will see this warning until, you relock the bootloader.
Important: Do not relock your bootloader until you have returned the device to Stock..
Return Phone to Stock
Backup your data/Internal storage
Settings > System > Advanced > Reset Options > Erase all data (factory reset)
Log in
Set up phone
Lock Bootloader
Do not lock the bootloader until you have returned the phone to stock. Failure to do so causes bricked phones.
This will erase all user data from the device!
Boot fastboot mode
Open a Command Prompt and type this at the Prompt: fastboot flashing lock
You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
Allow the process to complete, then type this at the Command Prompt: fastboot reboot
Enable Developer Options: Settings > About phone > Tap Build number 7 times or until you see 'you are a developer'.
Tap Back > Developer options and toggle OEM Unlock off.
Install/Update Factory Image keep or wipe data
Important Note(s):
When doing a major upgrade i.e., Android 10 (Q) to Android 11 (R): I recommend doing a clean install. What is a clean install?:
Doing a Factory reset prior to installing, major, update.
Using flash-all.bat file with the -w (Wipe Data).
Always verify you have the latest version of SDK Platform-Tools installed on your computer before installing the Factory Image: Pixel 3 XL - crosshatch.
If your phone was rooted, and you want to 'Keep Data'. Do this first unhide Magisk App (if you hid it) then Uninstall Magisk - Restore Images prior flashing the Factory image. Why? The changes in the Factory image may cause Magisk modules to fail. This will cause boot loops.
If you get an error:when flashing, try one of these options:
Change the USB port to a non charging USB port.
Change the USB cord.
Change Computers.
Backup your data
Download the latest Factory Image: Pixel 3 XL - crosshatch to your Computer.
Extract the factory Image to a folder.
Flash Factory Image Keep Data
Open the folder with the extracted the Factory Image and Edit the flash-all.bat file with a file editor i.e., Notepad. Remove -wfrom this command: fastboot -w update image-crosshatch-aa9a.999999.999.zip
Note: If you do not remove the -w your Internal Storage will be wiped.
Copy/Move these files to the Platform-tools folder:
bootloader-crosshatch-....img
flash-all.bat
image-crosshatch-....zip
radio-crosshatch-....img
At the Command Promp type: flash-all and press enter.
System will reboot when flashing is complete.
Do #7 to root/reroot.
Flash Factory Image Wipe Data
This will wipe your Internal Storage.
Open the folder with the extracted the Factory Image.
Copy/Move these files to the Platform-tools folder:
bootloader-crosshatch-....img
flash-all.bat
image-crosshatch-....zip
radio-crosshatch-....img
Open a Command Prompt on your computer in the Platform-tools folder.
At the Command Prompt type: flash-all and press enter.
System will reboot when flashing is complete.
Do #7 to root/reroot.
ADB Sideload
Stock Recovery
Full OTA Images for Nexus and Pixel Devices - Updating instructions
Custom Recovery - TWRP
Important notes:
Charge your device.
Enable USB Debugging on your phone.
Install the latest version of SDK Platform-tools on your computer.
Open a command prompt in the computer's ADB folder: the folder with ADB.exe in it.
Put the (flashable zip) file you want to sideload in the computer's ADB folder.Copy the Zip file you want to install on your device to the ADB folder.
Connect your device to your computer using a USB cable.
Boot T.W.R.P.
T.W.R.P installed: Boot fastboot mode ==> use volume buttons up/down until you see Recovery mode ==> press power botton.
T.W.R.P. not installed: Boot T.W.R.P: Put twrp.img file in the computer's ADB folder ==> open a command prompt in ADB folder ==> at the prompt type fastboot flash boot "Name of twrp file.img" without the quotation marks.
When T.W.R.P boots tap Advanced ==> ADB Sideload.
✓ the wipe Dalvik cache box
Swipe to start
On your Computer: Enter the following command at the command prompt. adb sideload <filename.Zip> i.e., adb sideload myfile.zip
You will see the progress of the sideloaded file.
When the file finishes sidloading, reboot your device.
Done!
Extract/Flash boot.img
Extract boot.img
Download the latest Factory image to your phone.
Extract the Factory Image file (crosshatch-pda1a.999999.999-factory-99a9a99a.zip) to a folder.
Open the folder and, extract the Image file (image-crosshatch-aa9a.999999.999.zip).
Flash boot.img
Note: Flashing this file removes root.
Open the folder you extracted the 'image...zip' file to and copy the boot.img file to your computer's platform-tools folder or to the folder that has fastboot.exe in it.
Boot fastboot mode
Connect the phone to the Computer
At the Command Prompt type: fastboot flash boot --slot all boot.img
Reboot
Root/Reroot with Magisk and Pass SafetyNet.
Important Notes:
When doing a major upgrade i.e., Android 10 (Q) to Android 11 (R). I recommend doing a clean install. What is a clean install?
Doing a Factory reset prior to installing, major, update.
Using flash-all.bat file without removing the -w.
If your phone was rooted. Do this first unhide Magisk App (if you hid it) then Uninstall Magisk - Restore Images. Why? The changes in the Factory image may cause Magisk modules to fail. This will cause boot loops.
Download files:
Magisk App - Download to your phone
Magisk Beta/Stable App
Magisk Canary App
Custom Kernels - Download to your phone - install with Kernel Manager
Important: Unless otherwise directed by Kernel Developer, Flash the Kernel after Magisk.
[Kernel][11.06.2021][4.9.272] Kirisakura_R 3.0.8 for Pixel 3/XL aka Bluecross by Freak07
Kernel Manager - Download to your phone
EX Kernel Manager
Patch the boot.img
Do #6 - Extract boot.img
Install Magisk (Beta, Canary or Stable) App
Open Magisk App
Depending on the version of Magisk App installed: Set the Update Channel to Beta, Canary or Stable.
Tap Install (next to Magisk)
Tap, Select and Patch a File
Select the boot.img file you extracted from the latest factory image.
Tap the ✓
Tap Let's Go
When you see done, the boot.img has been patched (magisk_patched_xxxxx.img), and stored in the download folder.
Reboot
Copy the patched boot.img file to your computer's Platform-tools folder or the folder that has fastboot.exe in it.
Boot fastboot mode (#1)
Connect the phone to the Computer with USB cord.
Open a Command Prompt (#1) in the folder you copied the patched boot.img to.
Type fastboot flash boot "name of patched boot".img without the quote marks at the Prompt and press enter.
Type fastboot reboot at the Prompt and press enter.
Important:If your phone boot loops try one of the following options.
Flash the stock boot.img to both slots. fastboot flash boot boot.img --slot all
Boot Safe Mode - Press Power Off button ==> Press Power Off until you see boot Safe Mode ==> Press Ok == > wait for it to boot ==> Reboot.
Pass SafetyNet: MAGISK MODULE ❯ Universal SafetyNet Fix 1.1.0
Download SafetyNetFix from the link above.
Open Magisk Canary App
Tap Modules icon.
Tap Install from storage
navigate to the SafetyNetFix file
Hightlight the file (tap it)
Tap the check mark (✓) to start the installation.
After it installs tap the Save icon to save the log
Tap Reboot.
Open Magisk Canary App
Tap the Setup icon.
Scroll down to Magisk - MagiskHide and enable it.
Tap back arrow => tap Superuser icon => tap MagiskHide => Scroll to the bottom of the page => Tap Search icon => Tap Show system apps (Under Filters) => check (✓): Google play services (com.google.android.gms).
Close Magisk Manager.
Open Settings
Tap Apps & notifications
Tap see all 999 apps
Tap the three dot menu
Tap Show system
Scroll down to Google Play Store
Tap it
Tap Storage & cache
Tap Clear cache
Tap Clear storage
Exit settings
reboot
Open Google Play Store app
Tap Menu
Tap Settings
Scroll down to Play protect certification
check for Device certification.
Set Magisk App Update Channel/Update Magisk
Set Magisk App Update Channel
Open Magisk App > Tap menu icon > Settings > Update Channel > Select Stable, Beta Canary or Custom.
Update Magisk
When Magisk App notifies you of an update:
Tap install.
Select, Direct Install (Recommended)
When it finishes installing
Tap, Save Log
Log location: /storage/emulated/0/MagiskManager/logs/install_log_
Tap, Reboot
Done
Custom ROMs
Need help with a Custom ROM?
Read and follow the Installation Instructions. The installation instructions are in the OP.
If you have a problem Installing the ROM, Search the thread of the Custom ROM you are trying to install for a solution to problem: If you don't find a solution post your request for help on the thread.
ROMs
Alpha/Beta
None
Official
[ROM][OFFICIAL][Android 11]ScorpionROM v4.x[Google Pixel 3/XL][Blueline/Crosshatch] by NepoRood
ROM][11][OFFICIAL] lineage-18.0 for Pixel 3/XL (blueline/crosshatch) by razorloves
Unofficial
None
Mods/Scripts/Themes
Tulsadiver's Mods
Android 10 ADB Installer-Zip Installer, creates magisk module by Tulsadiver
Android 10 Accents Mod by Tulsadiver
Others
[MODULE] MagiskHide Props Config - SafetyNet, prop edits, and more - v5.3.6 by Didgeridoohan
[Substratum][Magisk]Pixel Launcher Editor for P3XL by eg1122
[MOD][MAGISK][ANDROID 11] Addon Features for Pixel Devices - Pixel 3 XL Thread
T.W.R.P. Backup/T.W.R.P Update
Waiting for Android 11 (R) T.W.R.P.
Why on earth would anyone go through all these steps AND lock their bootloader when just using flashall.bat with -w intact also wipes your entire phone?!
@Homeboy76 did this work for you? Was getting ready to do a clean install and while researching what the delta of 19 and 20 was, I see talk of sensors not working?
I always appreciate using your guide(s). Thanks a lot!
guide works, thanks for helping me root android 10 on first day of official release
I've Magisk patched the boot.img using the Canary build and flashed.... it's been stuck on the bootscreen for about 20 minutes. Is this normal? How long should I leave it?
Has anyone gotten Adaway working?
Hi,
Great guide, appreciate it.
I'm on Android 9 rooted with magisk. when I try to install Android 10 I get an error below. Latest platform tools, Bonito .20 Any ideas what is wrong? Flashed multiple time through the Pie security updates etc and never had an issue.
_________________________________________________________________________________
F:\platform-tools>flash-all
Sending 'bootloader_a' (8349 KB) OKAY [ 0.298s]
Writing 'bootloader_a' (bootloader) Flashing Pack version b4s4-0.2-5736883
(bootloader) xbl signature verify fail
FAILED (remote: 'Validate packed image fail')
fastboot: error: Command failed
Rebooting into bootloader OKAY [ 0.048s]
Finished. Total time: 0.051s
Sending 'radio_a' (73196 KB) OKAY [ 1.798s]
Writing 'radio_a' (bootloader) Flashing Pack version SSD:g670-00025-190805-B-5781381
(bootloader) Flashing partition modem_a
OKAY [ 0.298s]
Finished. Total time: 2.376s
Rebooting into bootloader OKAY [ 0.048s]
Finished. Total time: 0.051s
--------------------------------------------
Bootloader Version...: b1c1-0.1-5191736
Baseband Version.....: g670-00025-190805-B-5781381
Serial Number........: 8A5Y0F91G
--------------------------------------------
extracting android-info.txt (0 MB) to RAM...
Checking 'product' FAILED
Device product is 'crosshatch'.
Update requires 'bonito' or 'sargo'.
fastboot: error: requirements not met!
Press any key to exit...
_________________________________________________________________
Looks like I screwed it up. Now it boots to the spinning G than back to Fastboot - "no valid slot to boot". Now what?
Reflashed Pie, all set -phone boots up. Now to figure out how to get to Android 10.
ginfest said:
Hi,
Great guide, appreciate it.
I'm on Android 9 rooted with magisk. when I try to install Android 10 I get an error below. Latest platform tools, Bonito .20 Any ideas what is wrong? Flashed multiple time through the Pie security updates etc and never had an issue.
........
Device product is 'crosshatch'.
Update requires 'bonito' or 'sargo'.
Click to expand...
Click to collapse
You've downloaded the wrong image. Are you on a 3a XL (Bonito) or regular 3 XL (Crosshatch)??
Download the correct image from here: https://developers.google.com/android/images
krs360 said:
You've downloaded the wrong image. Are you on a 3a XL (Bonito) or regular 3 XL (Crosshatch)??
Download the correct image from here: https://developers.google.com/android/images
Click to expand...
Click to collapse
Oh **** what a dummy I am! I'm on a Pixel 3XL not 3a XL. Sorry, I'll try again
---------- Post added at 08:49 AM ---------- Previous post was at 08:17 AM ----------
Ok, reflashed the correct Crosshatch 0.20, flashed the Magisk patched .img et viola, Android 10 rooted and no loss of data!
Thanks for all the help.
not to be that guy who asks for ETAs but any idea how long TWRP takes for a new version of android to come out? never really been around for a version release like this and just curious. waiting for TWRP to come out before i go through this process.
Homeboy76 said:
OP
Click to expand...
Click to collapse
Great write up! Thank you! I would suggest adding "--slot all" command to the magisk instructions. Root wasn't appearing to be working for me until I added that in.
pr0adam said:
not to be that guy who asks for ETAs but any idea how long TWRP takes for a new version of android to come out? never really been around for a version release like this and just curious. waiting for TWRP to come out before i go through this process.
Click to expand...
Click to collapse
This twrp works
https://forum.xda-developers.com/showpost.php?p=80017781&postcount=1152
---------- Post added at 06:17 PM ---------- Previous post was at 06:16 PM ----------
Has anyone been able to edit build.prop? I have root, but cannot mount the build.prop w/r.
lawtalking said:
This twrp works
https://forum.xda-developers.com/showpost.php?p=80017781&postcount=1152
---------- Post added at 06:17 PM ---------- Previous post was at 06:16 PM ----------
Has anyone been able to edit build.prop? I have root, but cannot mount the build.prop w/r.
Click to expand...
Click to collapse
even though it says its for blueline(pixel 3) and we are on crosshatch(pixel 3xl)?
I'm not able to flash the 10 factory image. I can flash pie just fine, but it always gives an error when trying to push the system image. I can flash Pie just fine. Anyone else have this issue?
jmartin72 said:
I'm not able to flash the 10 factory image. I can flash pie just fine, but it always gives an error when trying to push the system image. I can flash Pie just fine. Anyone else have this issue?
Click to expand...
Click to collapse
Are you getting an error saying that you need to use fastbootd?
airmaxx23 said:
Are you getting an error saying that you need to use fastbootd?
Click to expand...
Click to collapse
No it doesn't say that. I'd have to do it again to get the exact wording, but it makes my phone boot to some screen that says fastboot up at the top
pr0adam said:
even though it says its for blueline(pixel 3) and we are on crosshatch(pixel 3xl)?
Click to expand...
Click to collapse
Yes. The code paths are the same, so it works. Used it myself.
lawtalking said:
Yes. The code paths are the same, so it works. Used it myself.
Click to expand...
Click to collapse
Are you using just the .img each time or flashing an installer after?
Root Pixel 4 XL Android 10 (Q) Unlock/Lock Bootloader + Systemless ROOT
Android Security Buletin-August 2020
Pixel Update Bulletin—August 2020
Introduction
This Guide is for Pixel 4 XL owners that want to Root their phone, and enjoy the benefits of rooting it without installing a Custom ROM. However, for those that just can't live without a Custom ROM, take a look at 'Custom ROMs for Pixel 4 XL'.
This Guide also works for Pixel 4 owners: If, they download the Pixel 4 files.
NEW
Gpay not working? Try this.
Tulsadiver's ADB Magisk Module Mod Installer has a LINUX instaler.
The best instuctions on how to Pass SafetyNet, i've ever read.
Update(s)
Factory/OTA Images - 08/05
Magisk Stable - Magisk-22.0 02/23
Magisk Beta - Magisk-22.0 02/23
Magisk Canary - Magisk-22001
TWRP - twrp-3.5.0_10-1-coral.img/zip 01/02
SafetyNet - SafetyNetFix v1.1.1 01/16
SDK Platform-tools - r31.0.0 03/01
Custom Kernels
No Updated Kernels
Custom ROMs
Waiting
Disclaimers
I assume no responsibility for the malfunctioning/bricking of your phone.
The order of listed items i.e., Custom Kernels, Custom ROMS, etc. Does not indicate my preference for them. It is your responsibility to do the research before selecting an item.
Prerequisites
A Pixel 4 XL phone with an unlocked bootloader.
The latest Android 10 (Q) Factory or OTA Image: "coral" for Pixel 4 XL
Factory Image
10.0.0 (QQ3A.200805.001, Aug 2020)
OTA Image
10.0.0 (QQ3A.200805.001, Aug 2020)
Computer - With the latest SDK Platform-Tools: r31.0.0 installed.
Important: Update Platform Tools, regularly, for optimal performance.
Other Guides
[Guide] Root Pixel 4 XL Android 11 (R)
Credits/Thanks/Recognitions
@topjohnwu - Magisk Canary
Those I may have, inadvertently, forgotten.
Index
(NOTE: Numbers 1-13 are not steps, they are individual sets of instructions).
Open a Command Prompt/Boot Fastboot Mode/Boot Recovery
Open Command Prompt on Computer
Option 1 - Open File Explorer, click the platform-tools folder, press shift, right click, and select open command prompt here.
Option 2 - Open File Explorer, click the platform-tools folder, highlight the directory information in the address bar or click the folder (left side of address bar) to highlight it type cmd and press enter.
Notes:
If your computer only has 'open powershell here' in the context menu. Use option 2.
If you do not want to open a Command Prompt every time you want to use fastboot, add the path to the Platform-tools folder to Windows environment variables.
Boot fastboot mode:
Power off phone, press and hold the power and volume down buttons until you see Start.
Boot Recovery
Power off phone, press and hold the power and volume down buttons until you see Start. Use volume up/down button until you see Recovery mode. Press power button.
Test fastboot
Enable Developer Options - Tap Settings > About phone > Build number 7 times or until you should see 'you are a Developer'.
Enable USB Debugging - Tap Settings > System > Advanced > Developer options >
Enable USB Debugging.
Open a Command Prompt on your computer in the Platform-tools folder.
Boot fastboot mode on your phone (#1)
Connect the phone to the Computer.
At the prompt type: fastboot devices to verify communication with phone. It should return your phone's serial number.
Unlock Bootloader/Return Phone to Stock/Lock Bootloader
Unlock Bootloader
This will erase all user data from the device!
Backup your data
Activate Developer Options: Tap Settings > About Phone > Tap Build Number 7 times or until you see you are a Developer. Tap back > System > Advanced > Developer Options. Enable OEM Unlock and, USB Debugging.
Boot fastboot mode
Connect the phone to the Computer with USB cord.
Open a Command Prompt on your computer and type fastboot flashing unlock and press enter.
You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
Allow the process to complete and then type fastboot reboot at the Command Prompt and press enter.
When your phone reboots disconnect your usb cable.
Note: After unlocking your bootloader, you'll see a warning: You will see this warning until, you relock the bootloader.
Return Phone to Stock
Important: Do not relock your bootloader until you have returned the device to Stock..
Backup your data/Internal storage
Settings > System > Advanced > Reset Options > Erase all data (factory reset)
Log in
Set up phone
Lock Bootloader (Google Pixel 4 XL)
Return the phone to Stock before Locking the bootloader!
This will erase all user data from the device!
Boot fastboot mode
Open a Command Prompt and type this at the Prompt: fastboot flashing lock
You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
Allow the process to complete, then type this at the Command Prompt: fastboot reboot
Enable Developer Options: Settings > About phone > Tap Build number 7 times or until you see 'you are a developer'.
Tap Back > Developer options and toggle OEM Unlock off.
Install/Update Factory Image keep or wipe data
Important Note(s):
When doing a major upgrade i.e., Android 10 (Q) to Android 11 (R): I recommend doing a clean install. What is a clean install?:
Doing a Factory reset prior to installing, major, update.
Using flash-all.bat file without removing the -w.
Always verify you have the latest version of SDK Platform-Tools installed on your computer before installing the Factory Image: Pixel 4 XL - coral.
If your phone is rooted and you have Modules installed and you want to 'Keep Data', remove them before you install the Factory Image:
Why? Some Modules need to be updated before use with a new Factory/OTA image because (sometime) Google makes changes to Factory/OTA images that break the Modules.
How to remove Magisk: Open Magisk App ==> Tap Uninstall == Tap Restore Images.
If you get an error: when flashing the Factory image, try one of these options:
Change the USB port to a non charging USB port.
Change the USB cord to one that doesn't have the blue color head or use a USB C to C cable.
Change Computers.
Backup your data
Download the latest Factory Image: Pixel 4 XL - coral to your Computer.
Extract the factory Image to a folder.
Keep Data
Open the folder you extracted the Factory Image to and Edit the flash-all.bat file with a file editor i.e. Notepad. Remove -w from this command: fastboot -w update image-coral-aa9a.999999.999.zip
Note: If you do not remove the -w your data and internal storage will be wiped.
After, you have edited the flash-all.bat file. Copy/Move these files to the Platform-tools folder:
bootloader-coral-....img
flash-all.bat
image-coral-....zip
radio-coral-....img
Open a Command Prompt on your computer in the Platform-tools folder ==> Boot fastboot mode on your phone ==> Connect the phone to the Computer.==> At the prompt type: flash-all and press enter.
Note: During the flashing you may notice the phone is in fastbootd mode that is a normal for Android 10 (Q).
System will reboot when flashing is complete.
Do #7 or #8 to root/reroot.
Wipe Data
Open the folder you extracted the Factory Image to and View the flash-all.bat file with a file editor i.e. Notepad. Verify the file has the -w in this command: fastboot -w update image-crosshatch-aa9a.999999.999.zip
Note: This will wipe your data and internal storage.
Copy/Move these files to the Platform-tools folder:
bootloader-coral-....img
flash-all.bat
image-coral-....zip
radio-coral-....img
Open a Command Prompt on your computer in the Platform-tools folder ==> Boot fastboot mode on your phone ==> Connect the phone to the Computer.==> At the prompt type: flash-all and press enter.
Note: During the flashing you may notice the phone is in fastbootd mode that is a normal for Android 10 (Q).
System will reboot when flashing is complete.
Do #7 or #8 to root/reroot.
ADB Sideload
Stock Recovery
Full OTA Images for Nexus and Pixel Devices - Updating instructions
Custom Recovery - TWRP
Important notes:
Charge your device.
Enable USB Debugging on your phone.
Install the latest version of SDK Platform-tools on your computer.
Open a command prompt in the computer's ADB folder: the folder with ADB.exe in it.
Put the (flashable zip) file you want to sideload in the computer's ADB folder.Copy the Zip file you want to install on your device to the ADB folder.
Connect your device to your computer using a USB cable.
Boot T.W.R.P.
T.W.R.P installed: Boot fastboot mode ==> use volume buttons up/down until you see Recovery mode ==> press power botton.
T.W.R.P. not installed: Boot T.W.R.P: Put twrp.img file in the computer's ADB folder ==> open a command prompt in ADB folder ==> at the prompt type fastboot flash boot "Name of twrp file.img" without the quotation marks.
When T.W.R.P boots tap Advanced ==> ADB Sideload.
✓ the wipe Dalvik cache box
Swipe to start
On your Computer: Enter the following command at the command prompt. adb sideload <filename.Zip> i.e., adb sideload myfile.zip
You will see the progress of the sideloaded file.
When the file finishes sidloading, reboot your device.
Done!
Extract/Flash boot.img
Extract boot.img
Download the latest Factory image to your phone.
Use a File Explorer to extract the boot.img from the Factory Image.
Extract the Factory Image file (coral-pda1a.999999.999-factory-99a9a99a.zip) to a folder.
Open the folder and, extract the Image file (image-crosshatch-aa9a.999999.999.zip).
Flash boot.img
Note: Flashing this file removes root.
Open the folder you extracted the 'image file' to and copy the boot.img file to your computer's platform-tools folder or to the folder that has fastboot.exe in it.
Boot fastboot mode
Connect the phone to the Computer
Open a Command Prompt and type the following command at the prompt:
Code:
fastboot flash boot --slot all boot.img
Reboot
Install T.W.R.P./Root/Reroot with Magisk and Pass SafetyNet.
Important Note(s):
Set Pin before installing TWRP: Settings > Security & location >Screen lock > Pin
Backup your data
Download files - The listed files are used with #7, and #8.
T.W.R.P
twrp-3.5.0_10-1-coral.img - Download to your computer
twrp-installer-3.5.0_10-1-coral.zip - Download to your phone
Magisk - Download to your phone
The latest Magisk Beta/Stable zip. - Download to your phone
The latest Magisk Canary - Download to your phone
Custom Kernels - Download to your phone
No Updated Custom Kernels
Kernel Manager - Download to your phone
EX Kernel Manager
Boot fastboot mode
Connect the phone to the Computer with USB cord.
Copy twrp-3.5.0_10-1-coral.img to the platform-tools folder or folder that has fastboot in it and rename it twrp.img.
Open a Command Prompt on your computer.
At the Command Prompt type: fastboot boot twrp.img and press enter.
When TWRP boots, disconnect the phone from computer.
If requested, swipe to allow modifications.
Tap Install select twrp-installer-3.5.0_10-1-coral.zip, Swipe Slider to install
Reboot Recovery
Root/Reroot
Note(s):
If you are rerooting, tap Install, select Magisk's uninstaller.zip, Swipe the slider to install.
Some Custom Kernels can be updated by flashing via Kernel Manager without losing root. Check the Custom Kernel thread (OP - Installation/Instructions) to find out which Custom Kernels.
With Custom Kernel (Optional)
No Updated Custom Kernels
Without Custom Kernel
Tap Install, select Magisk-Beta/Canary/Stable zip.
Swipe Slider to Install
Reboot System
Install Modules (Optional)
Boot T.W.R.P./Root/Reroot with Magisk and Pass SafetyNet.
Backup your data
Download files - See #7 - Skip the twrp-installer
Boot fastboot mode
Connect the phone to the Computer with USB cord.
Copy twrp-3.5.0_10-1-coral.img to the platform-tools folder or folder that has fastboot in it and rename it twrp.img.
Open a Command Prompt on your computer.
At the Command Prompt type: fastboot boot twrp.img and press enter.
When TWRP boots, disconnect the phone from computer.
If requested, swipe to allow modifications.
Root/Reroot
Note: If you are rerooting, tap Install, select the latest Magisk's uninstaller.zip, Swipe the slider to install.
With Custom Kernel (Optional)
No Updated Kernels
Without Custom Kernel
Tap Install, select Magisk-Beta/Canary/Stable zip.
Swipe Slider to Install
Reboot System
Install Modules (Optional)
Root/Reroot with Magisk and Pass SafetyNet.
Important Note(s):
When doing a major upgrade i.e., Android 10 (Q) to Android 11 (R): I recommend doing a clean install. What is a clean install?:
Doing a Factory reset prior to installing, major, update.
Using flash-all.bat file without removing the -w.
To root use Magisk App Beta, Canary or Stable App to patch the Stock boot.img.
Download files:
Magisk App - Download to your phone
Magisk Beta/Stable App
Magisk Canary App
Custom kernels - Download to your phone - install with Kernel Manager
No updated Kernels
Kernel Manager - Download to your phone
EX Kernel Manager
Patching the boot.img
Do #6 - Extract boot.img
Install Magisk (Beta or Canary) App
Open Magisk App
Depending on the version of Magisk App installed: Set the Update Channel to Beta, Canary or Stable.
Tap Install (next to Magisk)
Tap, Select and Patch a File
Select the boot.img file you extracted from the latest factory image.
Tap the ✓ (Check Mark)
Tap Let's Go
When you see done, the boot.img has been patched (magisk_patched_xxxxxx.img) and stored in the download folder.
The phone will reboot.
Copy the magisk_patched.img file to your computer's Platform-tools folder or the folder that has fastboot.exe in it.
Boot fastboot mode (See #1B)
Connect the phone to the Computer with USB cord.
Open a Command Prompt (See #1A) in the folder you copied the magisk_patched.img to.
Type fastboot flash boot magisk_patched.img at the Prompt and press enter.
Type fastboot reboot at the Prompt and press enter.
Important Notes: If your phone boot loops try one of the following options:
Flash the 'stock' boot.img to both slots: fastboot flash boot boot.img --slot all
Boot Safe Mode - Press Power Off button ==> Press Power Off until you see boot Safe Mode ==> Press Ok.
Pass SafetyNet: #12 Apps/Mods/Scripts/Tethering/Themes
OTA Installation - Keep Root -- No Computer Needed
OTA Installation
Set Magisk App Update Chanel/Update Magisk
Set Magisk App Update Chanel
Open Magisk App > Tap menu icon > Settings > Update Channel > Select Stable, Beta, Canary or Custom.
Update Magisk
When Magisk App notifies you of an update:
Tap install.
Select, Direct Install (Recommended)
When it finishes installing
Tap, Save Log
Log location: /storage/emulated/0/MagiskManager/logs/install_log_...
Tap, Reboot
Done!
Custom ROMs for Pixel 4 XL
Need help with a Custom ROM?
Follow the Installation Instructions of the Developer of the Custom ROM you are trying to install.
If you have a problem Installing the ROM, Search the thread of the Custom ROM you want to install for solutions to problem before posting a request for help on their thread.
Custom ROMS
Alpha/Beta
Waiting...
Official
Waiting...
Unofficial
Waiting...
Apps/Mods/Scripts/Tethering/Themes
MAGISK MODULE ❯ Universal SafetyNet Fix 1.1.0
T.W.R.P. 3.5.0_10-1 Backup/Restore
https://forum.xda-developers.com/t/twrp-coral-official.4111017/post-82764097
Great write up...as always. Is there an way to update security patches and keep root?
State.of.mind said:
Great write up...as always. Is there an way to update security patches and keep root?
Click to expand...
Click to collapse
Not really if you use factory images.
https://forum.xda-developers.com/pixel-4-xl/how-to/november-factory-images-t3997383/post80784067
Edit: nevermind
Badger50 said:
Not really if you use factory images.
https://forum.xda-developers.com/pixel-4-xl/how-to/november-factory-images-t3997383/post80784067
Click to expand...
Click to collapse
I guess it depends on what Factory Image information is needed.
State.of.mind said:
Great write up...as always. Is there an way to update security patches and keep root?
Click to expand...
Click to collapse
Thank you!
No, but look at # 9C
How do you know what November security patch to choose? When I go on the factory website there are three different versions of the update.
---------- Post added at 08:18 AM ---------- Previous post was at 08:15 AM ----------
State.of.mind said:
How do you know what November security patch to choose? When I go on the factory website there are three different versions of the update.
Click to expand...
Click to collapse
Never mind. I used this link to figure it out: https://support.google.com/pixelphone/thread/18553639?hl=en Hopefully it helps someone else
So this may be a dumb question but, does accepting an OTA relock the boot loader?
fredgar75 said:
So this may be a dumb question but, does accepting an OTA relock the boot loader?
Click to expand...
Click to collapse
No, but you must be Stock to accept the OTA, unless you do the Magisk OTA Installation.
State.of.mind said:
How do you know what November security patch to choose? When I go on the factory website there are three different versions of the update.
---------- Post added at 08:18 AM ---------- Previous post was at 08:15 AM ----------
Never mind. I used this link to figure it out: https://support.google.com/pixelphone/thread/18553639?hl=en Hopefully it helps someone else
Click to expand...
Click to collapse
I guess you didn't see the description of the Factory/OTA at the end of the download Factory/OTA links in 'Prerequisites'.
Will this work on the Verizon Pixel 4 XL??
SAMCR02018 said:
Will this work on the Verizon Pixel 4 XL??
Click to expand...
Click to collapse
If the bootloader is unlocked, it will work.
Homeboy76 said:
If the bootloader is unlocked, it will work.
Click to expand...
Click to collapse
That I know ok can the Verizon version get the BL unlocked?
SAMCR02018 said:
That I know ok can the Verizon version get the BL unlocked?
Click to expand...
Click to collapse
AFIK there is no method of unlocking the bootloader of a Verizon Pixel 4 XL after you activate it.
This thread suggest a possibility of unlocking A Verizon Pixel 4 XL bootloader if done before you activate it.
https://forum.xda-developers.com/pixel-4-xl/how-to/root-instructions-verizon-pixel-4-xl-t3990767
[deleted]
Factory/OTA Images - Dec 2019
Does someone have December boot.img? Ater updating got into bootloop, flashing previous magisk boot image with fastboot didn't worked
Can anyone definitively tell me whether re-locking the bootloader will wipe any data on the Pixel 4 XL? Thanks in advance!
fronc said:
Can anyone definitively tell me whether re-locking the bootloader will wipe any data on the Pixel 4 XL? Thanks in advance!
Click to expand...
Click to collapse
Yes....it definitely will! All of it!
Factory images are up. Does anyone know which one is for which?
[Guide] Root Pixel 4 XL With Magisk Android 13
Android Security Bulletin—Feburary 2023
Pixel Update Bulletin—Feburary 2023
Introduction
This Guide is for Pixel 4 XL owners that want to Root their phone, and enjoy the benefits of rooting it. The Guide is divided into three parts: Information, Instructions, and Other.
~ ~ ~ Part I - INFORMATION ~ ~ ~
Disclaimer
I assume no responsibility for the malfunctioning/bricking of your phone.
The order of listed items i.e., Custom Kernels, Custom ROMS, etc. Does not indicate my preference for them. It is your responsibility to do the research before selecting an item.
Prerequisites
A Pixel 4 XL phone with an unlocked bootloader.
A Computer with the latest working SDK Platform-tools 33.0.3 installed.
Important Notes:
a. Before installing SDK Platform-tools, check for older versions of fastboot on your computer: Open a Command prompt and type fastboot --version at the prompt. If a adb/fastboot is found delete the folder containing them. Also, check the path environment for paths to them and remove it.
b. Update Platform Tools, regularly, for optimal performance.
c. Need Google's USB Drivers for your Pixel Phone?
NEW
"...make a 100% clean install of ANY Magisk version or fork without PC or TWRP."
Magisk General Support / Discussion
This is the place for general support and discussion regarding "Public Releases", which includes both stable and beta releases. All information, including troubleshoot guides and notes, are in the Announcement Thread
forum.xda-developers.com
Update(s)
Magisk Alpha - app-release_709f25f6-26101.apk 12 Apr
Magisk Beta - Magisk v26.1.apk 11 Apr
Magisk Canary - app-release_a8c4a33e-26103.apk 23 Jun
Magisk Cygisk - Click Pages 5 for installation Instructions.
Magisk Delta -
app-release
Magisk Stable - Magisk v26.1.apk 11 Apr
SafetyNet - Displax's SafetyNet Fix, v2.4.0-MOD_1.3 17Jun
SDK Platform-tools 33.0.3 Aug 2022
Custom Kernels
Note: If you are using a Custom Kernel, please update using the method in the OP, Index, 4. Install/Update Factory Image keep data or wipe data, • Flash Factory Image Keep Data
Google Pixel 4 XL ROMs, Kernels, Recoveries, & Other
My Other Guides
Pixel 7 Pro
Pixel 6
Pixel 5
Pixel 4a (5G)
Pixel 3 XL
Pixel 1 XL
Credits/Thanks/Recognitions
bradical711 - Instructions to Pass Safety Net
Those I may have, inadvertently, forgotten.
~ ~ ~ Part II - INSTRUCTIONS ~ ~ ~
(The Instructions listed below are not steps, they are individual sets of instructions.)
Open a Command Prompt/Boot Fastboot Mode/Boot Recovery
Open a Command Prompt on Computer
Open File Explorer, click the platform-tools folder ==> click the folder icon (left side of address bar) to highlight it type cmd and press enter.
Open a Powershell Command Prompt on Computer: Open File Explorer, click the platform-tools folder ==> click the folder icon (left side of address bar) to highlight it type powershell and press enter.
Notes:
Enable USB Debugging, on your phone: Settings ==> System ==> Advanced ==> Developer options ==> Scroll down to USB debugging and enable it.
When using the Powershell Command Prompt Commands must be preceeded with ./: i.e, ./fastboot devices
If you do not want to open a Command Prompt every time you want to use the fastboot command, add the path to the Platform-tools folder to Windows environment variables.
Boot fastboot mode (bootloader):
Power off phone, press and hold the power and volume down buttons until you see Start.
Boot Recovery
Power off phone, press and hold the power and volume down buttons until you see Start. Use volume up/down button until you see Recovery mode. Press power button.
Test fastboot
Enable Developer Options - Tap Settings > About phone > Build number 7 times or until you should see 'you are a Developer'.
Enable USB Debugging - Tap Settings > System > Advanced > Developer options >
Enable USB Debugging.
Open a Command Prompt on your computer in the Platform-tools folder.
Boot fastboot mode on your phone (#1)
Connect the phone to the Computer.
At the prompt type: fastboot devices to verify communication with phone. It should return your phone's serial number.
Unlock Bootloader/Return Phone to Stock/Lock Bootloader
Unlock Bootloader
This will erase all user data from the device!
Backup your data
Activate Developer Options: Tap Settings > About Phone > Tap Build Number 7 times or until you see you are a Developer. Tap back > System > Advanced > Developer Options. Enable OEM Unlock and, USB Debugging.
Boot fastboot mode
Connect the phone to the Computer with USB cord.
Open a Command Prompt on your computer and type fastboot flashing unlock and press enter.
You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
Allow the process to complete and then type fastboot reboot at the Command Prompt and press enter.
When your phone reboots disconnect your usb cable.
Notes: After unlocking your bootloader, you'll see a warning: The bootloader is unlocked and... You will see this warning until, you relock the bootloader.
Do not relock your bootloader until you have returned the device to Stock.
Return Phone to Stock
Backup your data/Internal storage
Settings > System > Advanced > Reset Options > Erase all data (factory reset)
Log in
Set up phone
Lock Bootloader
Return the phone to Stock before locking the bootloader, failure to do so could brick your phone
This will erase all user data from the device!
Boot fastboot mode
Open a Command Prompt and type this at the Prompt: fastboot flashing lock
You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
Allow the process to complete, then type this at the Command Prompt: fastboot reboot
Enable Developer Options: Settings > About phone > Tap Build number 7 times or until you see 'you are a developer'.
Tap Back > Developer options and toggle OEM Unlock off.
(NEW) Make Both Slots Bootable: Manually, Flash the OTA Image to Both Slots - One bootable and rooted, the other slot bootable without root.
Before you start
Backup your data
Make sure that there is no pending OTA update, by going to Settings > About phone > System updates, which should say Your system is up to date.
Download the latest Factory and OTA image for your device.
Verify the checksum of the Factory and OTA image. The last portion of the filename is the first 8 digits of its SHA-256 checksum; the full SHA-256 checksum is shown next to the download link.
Extract the boot/init_boot.image from the Factory image:
Extract the Factory Image file that you downloaded (coral-a9a9a.999999.999-factory-99a9a99a.zip) into a folder.
Open the folder you extracted the Factory image to and extract the Image file (image-coral-aa9a.999999.999.zip) into a folder. The stock boot/init_boot.img file should be in this folder.
Patch the boot/init_boot.img:
Open the Magisk Alpha/Beta/Canary/Delta/Stable App
The Update Channel should be set to Alpha/Beta/Canary/Delta/Stable, depending on the version you installed.
Tap Install (next to Magisk)
Tap, Select and Patch a File
Select the boot/init_boot.img file you extracted from the factory image.
Tap the ✓ (Check Mark)
Tap Let's Go
When you see done, the boot/init_boot.img has been patched (magisk_patched_xxxxxx.img), and is stored in the download folder.
Reboot
Copy/Move the magisk_patched....img file to your computer's Platform-tools folder or the folder that has fastboot.exe in it:
Boot Recovery mode
With the device powered on and USB debugging enabled, type: adb reboot recovery
If you're unable to use adb to reboot into recovery, you can use the key combination for your device: Press and hold Volume Down button, then press and hold Power button then use the Volume Down/Up button to select the Recovery option from the menu.
The device is now in recovery mode an Android logo with red exclamation mark should be on the screen.
Access the recovery menu:
Hold the Power button and press Volume button up once. The recovery text menu will appear.
Enter sideload mode:
Select the Apply update from ADB option from the recovery text menu
Run the following command: adb devices check that your device shows up with "sideload" next to its name.
Sideload the OTA zip file
Connect the phone to the PC via USB cable
On the phone: boot bootloader/fastboot mode
On the PC:
Open a command prompt in the SDK Platform-tools folder.
Type:
adb sideload coral-ota-tq3a.230605.012-f32168af.zip and press enter.
Once sideloading finishes, reboot the phone by choosing Reboot system now option on the The recovery text menu.
Sideload the OTA zip file to the other slot and Root it.
Boot Recovery mode
With the device powered on and USB debugging enabled, type: adb reboot recovery
If you're unable to use adb to reboot into recovery, you can use the key combination for your device: Press and hold Volume Down button, then press and hold Power button then use the Volume Down/Up button to select Recovery option from the menu.
The device is now in recovery mode an Android logo with red exclamation mark should appear on screen.
Access the recovery menu:
Hold the Power button and press Volume up button once.
The recovery text menu will appear.
Enter sideload mode:
Select the Apply update from ADB option on the recovery text menu.
[*]Sideload the OTA zip file
Connect the phone to the PC via USB cable
On the phone: boot bootloader/fastboot mode
On the PC:
Open a command prompt in the SDK Platform-tools folder.
Type: adb sideload coral-ota-tq3a.230605.012-f32168af.zip at the prompt and press enter.
Once sideloading finishes, choose Reboot system now option on the The recovery text menu.
Flash boot/init_boot.img to root
On the phone: Boot bootloader/fastboot mode
Connect the phone to the Computer with USB cord.
On the PC:
Open a Command Prompt in the SDK Platform-tools folder.
Type: fastboot flash boot/init_boot magic_patched....img at the Prompt and press enter.
Type: fastboot reboot at the Prompt and press enter.
Disconnect the phone from the PC.
Notes:
This slot is bootable and rooted. The other slot is bootable without root.
Check that the other slot is bootable and not rooted
On the Phone: Boot bootloader/fastboot mode
Connect the phone to the PC via USB cable
On the PC:
Open a command prompt in the SDK Platform-tools folder.
Type: fastboot --set-active=other at the prompt and press enter.
Type: fastboot reboot and press enter.
Disconnect the phone from the PC.
To return to the other slot that is bootable and rooted
On the Phone: Boot bootloader/fastboot mode
Connect the phone to the PC via USB cable
On the PC:
Open a command prompt in the SDK Platform-tools folder.
Type: fastboot --set-active=other at the prompt and press enter.
Type: fastboot reboot and press enter.
Disconnect the phone from the PC.
Done!
ADB Sideload
Stock Recovery
Full OTA Images for Nexus and Pixel Devices - Updating instructions
Custom Recovery TWRP
Waiting for Android 11 (R) T.W.R.P
Flash boot.img
Flashing the boot.img removes root.
Copy/Move the boot.img file to your computer's platform-tools folder or to the folder that has fastboot.exe in it.
Boot fastboot mode
Connect the phone to the Computer
Open a Command Prompt and type the following command at the prompt:
fastboot flash boot --slot all boot.img
Reboot
Pass SafetyNet with Magisk module.
Pass Safety Net with SafetyNet Fix Magisk Module
Download File(s)
Displax's latest SafetyNet Fix, a "fork" of kdrag0n safetynet-fix.
These are the NEW Magisk Module repositories:
Androidacy Module Manager
Androidacy Module Manager - Releases
Androidacy Download Center
This is the old Magisk Module repository:
https://github.com/Fox2Code/Fox Magisk Module Manager
Install Displax's safetyNet Fix
Open Magisk
Tap Modules icon
Tap Install from storage
Navigate to the Displax's SafetyNet Fix file you downloaded.
Tap the Displax's SafetyNet Fix file.
Tap the check mark (✓ at the bottom) to start the installation.
After it installs tap the Save icon to save the log
Tap Reboot.
Settings for Magisk Canary
Open Magisk App
Tap the Setup icon.
Scroll down to App and set the Update Channel to Canary.
Scroll down to Check Updates and enable it.
Scroll down to Magisk and enable Zygisk.
Enable Denylist
Tap Configure DenyList => Tap 3 Dot Menu => Check ✓ Show system apps => Check ✓ Google Play Store, Google Pay, Google Wallet etc.
(Optional) Scroll down to Superuser and enable Enable Biometric Authentication.
Get Device Certified
Turn Airplane mode on
Open Settings
Tap Apps & notifications
Tap see all...
Tap three dot menu
Tap Show system
Scroll to Google Play Store
Tap Storage and Cache
Tap Clear storage
Note: Repeat the 3 steps above for any app that needs Device Certification i.e., Google Play Services, Google Pay, Google Wallet, etc.
reboot
Turn Airplane mode off
Check Device Certification
Open Google Play Store app
Tap Menu - Circle top right
Tap Settings
Tap About
Check Play protect certification
It may take 24 hours for Device Certification to be updated.
Note: If after completeting Get Device Certified and Check Device Certification you've waited 24 hours your Device is not Certifed or your Device is Certified and certain Google Store apps (Google Pay, NetFliks, etc.) are not working. Use the Play Integrity API Checker app or the TB Checker - Safetynet and Root app to verify you are passing Play Integrity.
Set Magisk App Update Channel/Update Magisk
Set Magisk App Update Channel
Open Magisk App > Tap Settings icon > Update Channel > Select Stable, Beta, Canary or Custom.
Update Magisk
When Magisk App notifies you of an update:
Tap install.
Select, Direct Install (Recommended)
When it finishes installing
Tap, Save Log
Log location: /storage/emulated/0/Download
Tap, Reboot
Done!
Install/Update Magisk Modules
Download File(s)
Displax's latest SafetyNet Fix, a "fork" of kdrag0n safetynet-fix.
These are the NEW Magisk Module repositories:
Androidacy Module Manager
Androidacy Module Manager - Releases
Androidacy Download Center
This is the old Magisk Module repository:
https://github.com/Fox2Code/Fox Magisk Module Manager
LSposed Releases
Shamiko Releases
Install Modules from Storage
Open Magisk
Tap the Modules icon
Tap Install from storage
Navigate to the folder with the Module you want to install.
Tap the Module to highlite it and tap Select.
After it installs, tap the Disc Icon to save the install log.
Tap Reboot
Install Modules from Androidacy Module Manager
Open Androidacy Module Manager
Tap the Modules icon
Locate the Module you want to install
Tap Install
After it installs, tap the Disc Icon to save the install log.
Tap Reboot
Update Modules
Open Androidacy Module Manager
You, will see the Modules that have Updates.
Tap the Module you want to update.
Tap install.
After it installs, tap the Disc Icon to save the install log.
Tap Reboot
~ ~ ~ Part III - OTHER ~ ~ ~
Custom ROMs
Need help with a Custom ROM?
If you are trying to install or have installed a Custom ROM, read and follow the Installation Instructions in the OP of the Custom ROM thread or Try installing it with PixelFlasher, a GUI tool for flashing / updating / rooting / managing Pixel phones..
Search the thread of the Custom ROM you are trying to install or have installed for answer(s)/solution(s) to your question(s)/problem(s): If you don't find a answer(s)/solution(s) to your question(s)/problem(s). Post your question(s)/request(s) for help in the Custom ROM thread you are trying to install or have installed.
If you are trying to install a Addon(s) {Custom Kernel, Magisk, etc.} to the Custom ROM you installed: Search the thread of the Custom ROM you installed or the thread of the Addon you want to add to your Custom ROMfor answer(s)/solution(s) to your question(s)/problem(s). If you don't find an answer(s)/solution(s) to your question(s)/problem(s). Post your question(s)/request(s) for help in the Custom ROM or Addon (Custom Kernel, Magisk, etc.) thread.
ROMs
Google Pixel 4 XL ROMs, Kernels, Recoveries, & Other
Themes, Apps, and Mods
Google Pixel 4 XL Themes, Apps, and Mods
T.W.R.P. Backup/Restore
Waiting for Android 13 T.W.R.P.
U da man Homeboy76. Really appreciate all the work you did putting this together. Thanks.
fastboot flash boot magisk_patched.img.--slot all
i have to remove the period after the patched.img. if not i get a no such file in directory
mikepopo99 said:
fastboot flash boot magisk_patched.img.--slot all
i have to remove the period after the patched.img. if not i get a no such file in directory
Click to expand...
Click to collapse
:good:
Worked like a charm for me. I did a clean a clean install. No issues. Just like flashing a monthly update.
Bootlooping
no matter what I do I keep bootlooping. I'm doing everything on the instructions list. IM trying to root android 11 on my pixel 4 xl. I just flashed the update with the flash all and wiped everything. But when i try to root it gets stuck at the google logo. i have the Magisk Canary Channel installed and patched the boot image and everything. I get the no valid slot to boot in the bootloader.
mikepopo99 said:
no matter what I do I keep bootlooping. I'm doing everything on the instructions list. IM trying to root android 11 on my pixel 4 xl. I just flashed the update with the flash all and wiped everything. But when i try to root it gets stuck at the google logo. i have the Magisk Canary Channel installed and patched the boot image and everything. I get the no valid slot to boot in the bootloader.
Click to expand...
Click to collapse
Curious
- SDK Platform-tools r 30.0.4?
- What slot did the September 2020 Factory image flash to?
I'm not sure what slot. But yes I am using the newest platform tools. How can I check. I just did the flash all script from Google and did a clean install.
mikepopo99 said:
I'm not sure what slot. But yes I am using the newest platform tools. How can I check. I just did the flash all script from Google and did a clean install.
Click to expand...
Click to collapse
Check: Boot fastboot mode (#1 in the guide) see boot slot.
Best guide on xda.
I just wonder: Can I flash Android 11 on top of Android 10 and keep my data (by removing -w) or is it recommended to clean flash Android 11?
Utini said:
Best guide on xda.
I just wonder: Can I flash Android 11 on top of Android 10 and keep my data (by removing -w) or is it recommended to clean flash Android 11?
Click to expand...
Click to collapse
I recommend clean flashing.
Utini said:
Best guide on xda.
I just wonder: Can I flash Android 11 on top of Android 10 and keep my data (by removing -w) or is it recommended to clean flash Android 11?
Click to expand...
Click to collapse
I would never try to tell anyone which way is the correct way since opinions vary. Having said that, I updated without the -w and have had zero problems thus far. However, I would take all necessary precautions as usual:
1. Update your platform-tools.
2. Remove/disable all magisk modules.
3. Remove your face unlock before starting.
4. You'll need to be on the latest canary magisk if you want to root.
5. If you patch your boot.img, make sure the finished image is 32.55 mb. I personally patch the new boot.img before even starting the update process so it's ready to go.
Again, this is how I like to update my device, and is not the be all end all method that others may like to use. Best of luck to you no matter which method you may choose to use. :good:
Badger50 said:
I would never try to tell anyone which way is the correct way since opinions vary. Having said that, I updated without the -w and have had zero problems thus far. However, I would take all necessary precautions as usual:
1. Update your platform-tools.
2. Remove/disable all magisk modules.
3. Remove your face unlock before starting.
4. You'll need to be on the latest canary magisk if you want to root.
5. If you patch your boot.img, make sure the finished image is 32.55 mb. I personally patch the new boot.img before even starting the update process so it's ready to go.
Again, this is how I like to update my device, and is not the be all end all method that others may like to use. Best of luck to you no matter which method you may choose to use. :good:
Click to expand...
Click to collapse
A second opinion is good.
Any tricks to getting Safetynet to pass? I did a clean install and build updated everything and safetynet is still failing.
Thanks all.
great guide! i almost messed up bad when i flashed first time it froze up and stalled i realised my ssd main drive ran out of space. freed up some space and retried and all worked great! (its a lot bigger than i thought when installing)
Great guide. Boot image is patched and flashed on Android 11.
I can't pass SafetyNet however. Is anyone on Android 11 and passing? Any tips?
madmaverickmatt said:
Any tricks to getting Safetynet to pass? I did a clean install and build updated everything and safetynet is still failing.
Thanks all.
Click to expand...
Click to collapse
ucantescape1992 said:
Great guide. Boot image is patched and flashed on Android 11.
I can't pass SafetyNet however. Is anyone on Android 11 and passing? Any tips?
Click to expand...
Click to collapse
Safetynet
https://forum.xda-developers.com/apps/magisk/module-magiskhide-props-config-t3789228
Post deleted!
So, I've been out of the flashing game for a long minute but I had to do something about all the ads I was getting. Blockada seemed to work okay but always left something to be desired. I missed Adaway, so....
I had a hard time getting Magisk installed in Android 11 on my Pixel 4xl. I followed this well written tutorial to a tee but when I flashed magisk_patched.img to boot, then "fastboot reboot," it would kick me back to fastboot after the "G" screen and spit out the error "no valid slot to boot." Three times in a row after clean flashing the factory image too!
I did end up getting it working. What I ended up doing was instead of "fastboot flash boot magisk_patched.img --slot all" I "fastboot flash boot magisk_patched.img" and for whatever reason that seemed to work.
I did not take the OTA update if it matters. I had intended to wipe the device with a clean install of Android 11, then Magisk (just for ad blocker) from the get so, I'm guessing slot b wasn't used? I'm honestly not really sure how it works.
Even then though, I had some trouble getting the order right from flashing the factory image to being rooted, so this is also what I found.
First, unlock the bootloader of your device, then clean install Android 11 and get it set up. Download Magisk manager canary, then adb push the boot.img from your computer to your device. Use Magisk manager to patch it, then adb pull magisk_patched.img back to your computer. From there, fastboot flash boot your magisk_patched.img and you're golden. Fastboot reboot should put you back in to Android and then Magisk manager will recognize root.
I had tried several times to use a boot.img I had already patched some days earlier but it never seemed to work. It would boot okay, once I figured out not to "--slot all," but Magisk would never recognize it was rooted unless Magisk manager patched it and I flashed that particular patched file. If I tried to flash any other patched file, Magisk manager wouldn't recognize root. Even recently patched boot.img's that were flashed to the device (not the days old one I had pre-prepped) wouldn't work. Magisk manager only seemed to recognize patched boot.img's that were made by it in that particular install. If I tried to use a boot.img from any other Magisk Manager install it wouldn't recognize it. Weird? I dunno, but, I got it up and running!
Thanks Homeboy76 for making this tutorial. Without it I would have been lost. :good:
TheDiabolicaL1 said:
...I did end up getting it working. What I ended up doing was instead of "fastboot flash boot magisk_patched.img --slot all" I "fastboot flash boot magisk_patched.img" and for whatever reason that seemed to work... :good:
Click to expand...
Click to collapse
@TheDiabolicaL1
Thanks for the kind words.
Glad you got it working and, thanks for posting this information: fastboot flash boot magisk_patched.img
It provides an alternative method of flashing the magisk_patched boot.img for the members getting boot loops.
However, fastboot flash boot magisk_patched.img --slot all does work without boot loops:
C:\android-sdk_windows\image-coral-rp1a.200720.009\platform-tools_r30.0.4-windows>fastboot flash boot magisk_patched.img --slot all
Sending 'boot_a' (33336 KB) OKAY [ 0.234s]
Writing 'boot_a' OKAY [ 0.326s]
Sending 'boot_b' (33336 KB) OKAY [ 0.234s]
Writing 'boot_b' OKAY [ 0.335s]
Finished. Total time: 2.509s
[Guide] Root Pixel 5 with Magisk + Unlock Bootloader + Pass SafetyNet + More
Android Security Bulletin—June 2023
Pixel Update Bulletin—June 2023
Introduction
This Guide is for Pixel 5 owners that want to Root their phone, and enjoy the benefits of rooting it. The Guide is divided into three parts: Information, Instructions, and Other.
~ ~ ~ Part I - INFORMATION ~ ~ ~
Disclaimer
I assume no responsibility for the malfunctioning/bricking of your phone.
If you choose to use a Custom Kernels, Custom ROM, etc. You should read the Installation Instructions in their thread before using this guide or attempting to install them. Additionally, the order of listed items i.e., Custom Kernels, Custom ROMS, etc. Does not indicate my preference for them. It is your responsibility to do the research before selecting them.
.
Prerequisites
A Pixel 5 phone with an unlocked bootloader.
The latest Android 13 Factory or OTA Image: "redfin" for Pixel 5
Factory Image
13.0.0 (TQ3A.230605.011, Jun 2023)
Which one should I use?
OTA Image
13.0.0 (TQ3A.230605.011, Jun 2023)
Which one should I use?
A Computer with the latest working SDK Platform-tools 33.0.3 installed.
Important Notes:
a. Before installing SDK Platform-tools, check for older versions of fastboot on your computer: Open a Command prompt and type fastboot --version at the prompt. If a adb/fastboot is found delete the folder containing them. Also, check the path environment for paths to them and remove it.
b. Update Platform Tools, regularly, for optimal performance.
c. Need Google's USB Drivers for your Pixel Phone?
NEW
Both Slots Bootable
@badabing2003 has found a way to Have both slots bootable.
He has automated the procedure and added it to PixelFlasher.
@Lughnasadh tested the Both Slots Bootable procedure on his Google Pixel 7 Pro and Google Pixel 6 Pro phones: It works!
Android 14 Beta are up.
Builds are only available for the following Pixel devices:
Google Pixel 4a5(G)
Google Pixel 5 and 5a
Google Pixel 6 and 6 Pro
Google Pixel 6a
Google Pixel 7 and 7 Pro
* * * 64-bit-only system images * * *
Google Pixel 4a (5G)
Google Pixel 5
Google Pixel 6
Google Pixel 6 Pro
Android 14 GSI binaries and release
Pixel 4a5(G)
Pixel 5 and 5a
Pixel 6 and 6 Pro
Pixel 6a Pro
Pixel 7 and 7 Pro
Update(s)
Factory/OTA Images - 13 June
Android 14 DP
Factory images and OTA images
Android 14 GSI binaries and release
Magisk Alpha - app-release_709f25f6-26101.apk 12 Apr
Magisk Beta - Magisk v26.1.apk 11 Apr
Magisk Canary - app-release_a8c4a33e-26103.apk 23 Jun
Magisk Cygisk - Click Pages 5 for installation Instructions.
Magisk Delta -
app-release
Magisk Stable - Magisk v26.1.apk 11 Apr
SafetyNet - Displax's SafetyNet Fix, v2.4.0-MOD_1.3 17Jun
SDK Platform-tools 33.0.3 Aug 2022
Custom Kernels
a. Google Pixel 5 ROMs, Kernels, Recoveries, & Otherb. ElementalX Kernel Manager
My Other Guides
Pixel 7 Pro
Pixel 6
Pixel 4a (5G)
Pixel 4 XL
Pixel 3 XL
Pixel 1 XL
Credits/Thanks/Recognitions
Those I may have, inadvertently, forgotten.
~ ~ ~ Part II - INSTRUCTIONS ~ ~ ~
(The Instructions listed below are not steps, they are individual sets of instructions.)
Unlock Bootloader/Return Phone to Stock/Lock Bootloader
Unlock Bootloader
This will erase all user data from the device!
Backup your data
Activate Developer Options: Tap Settings > About Phone > Tap Build Number 7 times or until you see you are a Developer. Tap back > System > Advanced > Developer Options. Enable OEM Unlock and, USB Debugging.
Boot fastboot mode
Connect the phone to the Computer with USB cord.
Open a Command Prompt on your computer and type fastboot flashing unlock and press enter.
You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
Allow the process to complete and then type fastboot reboot at the Command Prompt and press enter.
When your phone reboots disconnect your usb cable.
Notes: After unlocking your bootloader, you'll see a warning: The bootloader is unlocked and... You will see this warning until, you relock the bootloader.
Do not relock your bootloader until you have returned the device to Stock.
Return Phone to Stock
Backup your data/Internal storage
Use the Android flash tool:
select Wipe => Force Flash Partitions => Lock Bootloader.
Lock Bootloader
If your phone is not 100 percent stock do Return Phone to Stock. If you don't you may brick your phone.
This will erase all user data from the device!
Boot fastboot mode
Open a Command Prompt and type this at the Prompt: fastboot flashing lock
You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
Allow the process to complete, then type this at the Command Prompt: fastboot reboot
Enable Developer Options: Settings > About phone > Tap Build number 7 times or until you see 'you are a developer'.
Tap Back > Developer options and toggle OEM Unlock off.
Manually Install/Update Factory Image keep data or wipe data
Important Note(s):
If you haven't updated your phones Factory image in awhile. It is not necessary to flash all the missed images in succession. Flash the latest Factory image.
If you are uncomfortable manually flashing the factory image. Try PixelFlasher by badabing2003.
If your phone was previously rooted, open Magisk manager and disable all Magisk modules. If you hid the Magisk manager app the default name for the hidden Magisk app is settings.
If you want to Upgrade to a new Android Version or update the Factory Image without wiping your phone: Do Flash Factory Image Keep Data (below).
Always verify you have the latest working version of SDK Platform-Tools installed on your computer before installing the Factory Image: Pixel 5 - redfin.
If you get an error: while flashing, try one of these options:
Change the USB port to a non charging USB port.
Change the USB cord.
Change Computers.
If your phone boot loops try one of the following options:
Flash the 'stock' boot.img to both slots: fastboot flash boot boot.img --slot all
Remove Modules
Press the Power button until the phone turns off.
Press the Power and Volume Down to boot the bootloader.
Open a Command Prompt in the SDK-Platform-tools folder or the folder that has adb.exe in it, and type adb wait-for-device shell magisk --remove-modules
then type
fastboot Reboot
Backup your data
Download the latest Factory Image: Pixel 5 - redfin to your Computer.
Go to Part II - INSTRUCTIONS => 4. Extract Files from the FactoryImage/Flash boot.img and extract the flash-all.bat file.
Flash Factory Image Keep Data
Installing/Upgrading Android Version/
* E D I T - flash-all.bat file *
Flash to current/Active Slot.
* * * S T A R T - E D I T * * *
@Echo off
PATH=%PATH%;"%SYSTEMROOT%\System32"
fastboot flash bootloader bootloader-redfin-a9-9.9-9999999.img
fastboot reboot-bootloader
ping -n 5 127.0.0.1 >nul
fastboot flash radio radio-redfin-a9999-99999-999999-b-9999999.img
fastboot reboot-bootloader
ping -n 5 127.0.0.1 >nul
fastboot update image-redfin-aa9a.999999.999.zip
Note:The -w is removed to Keep Data.
echo Press any key to exit...
pause >nul
exit
* * * * E N D - E D I T * * * *
Note: It is a good idea to flash the Google factory image to both slots (A & B) when updating or upgrading to new Android version.
See Flash Other Slot bat file... below.
Flash Other Slot bat file - Save as flash-other.bat
Note: To run this file type flash-other at the Command Prompt.
ECHO OFF
PATH=%PATH%;"%SYSTEMROOT%\System32"
echo This is the slot you are currently on.
fastboot getvar current-slot
echo Press any key to continue...
pause >nul
fastboot --set-active=other
fastboot reboot-bootloader
ping -n 5 127.0.0.1 >nul
echo This is the slot you switched to.
fastboot getvar current-slot
echo Press any key to continue...
pause >nul
flash-all
exit
* * * * E N D File * * * *
After, you have edited the flash-all.bat file. Copy/Move these files to the Platform-tools folder:
bootloader-redfin-....img
flash-all.bat
image-redfin-....zip
radio-redfin-....img
On your phone: Boot the bootloader (Power off the phone => Press the Power and Down buttons until you see Start)
Connect your phone to the computer.
Open a Command Prompt on your computer in the Platform-tools folder and type: flash-all at the Command Prompt and press enter.
The phone will reboot when flashing is completed.
Go-to ~ ~ ~ Part II - INSTRUCTIONS ~ ~ ~, 5. Root/Reroot with Magisk and Pass SafetyNet, • Patching the boot.img - to root/reroot.
Flash Factory Image Wipe Data
This will wipe your phone's Data/Internal Storage.
Do not edit the flash-all.bat file,unless you need to disable Verity and Verification to use a custom kernel.
* E D I T - flash-all.bat file *
@Echo off
PATH=%PATH%;"%SYSTEMROOT%\System32"
fastboot --set-active=other
fastboot reboot-bootloader
fastboot flash bootloader bootloader-redfin-a9-9.9-9999999.img
fastboot reboot-bootloader
ping -n 5 127.0.0.1 >nul
fastboot flash radio radio-redfin-a9999-99999-999999-b-9999999.img
fastboot reboot-bootloader
ping -n 5 127.0.0.1 >nul
fastboot -w update --disable-verity --disable-verification image-redfin-aa9a.999999.999.zip
echo Press any key to exit...
pause >nul
exit
Notes:
The first time you Disable Verity and Verification it will wipe your Data/Internal Storage.
When doing Subsequent updates and disabling Verity and Verification, the -w flag can be removed to Keep Data.
Once you start Disabling Verity and Verification you should continue doing it. If you skip disabling them one time. The next time you Disable Verity and Verification it will wipe your phone.
To flash both slots (A & B partitions) see Flash Other Slot bat file... above.
* * * * E N D - Edit * * * *
Open the folder you extracted the Factory Image to and Copy/Move these files to the Platform-tools folder:
bootloader-redfin-....img
flash-all.bat
image-redfin-....zip
radio-redfin-....img
On your phone: Boot the bootloader (Power off the phone => Press the Power and Down buttons until you see Start)
Connect your phone to the computer.
Open a Command Prompt on your computer in the Platform-tools folder and type: flash-all at the Command Prompt and press enter.
The phone will reboot when flashing is complete.
Setup phone
Enable Developer Mode and USB Debugging
Setup => About phone => Tap Build number 7 times or untill you see you are a 'Devloper'.
Setup => System => Developer options => Enable Developer options => enable USB Debugging
Go-to ~ ~ ~ Part II - INSTRUCTIONS ~ ~ ~, 5. Root/Reroot with Magisk and Pass SafetyNet, • Patching the boot.img - to root/reroot.
(NEW) Make Both Slots Bootable: Manually, Flash the OTA Image to Both Slots - One bootable and rooted, the other slot bootable without root.
Before you start
Backup your data
Make sure that there is no pending OTA update, by going to Settings > About phone > System updates, which should say Your system is up to date.
Download the latest Factory and OTA image for your device.
Verify the checksum of the Factory and OTA image. The last portion of the filename is the first 8 digits of its SHA-256 checksum; the full SHA-256 checksum is shown next to the download link.
Extract the boot.img from the Factory image:
Extract the Factory Image file that you downloaded (redfin-a9a9a.999999.999-factory-99a9a99a.zip) into a folder.
Open the folder you extracted the Factory image to and extract the Image file (image-redfin-aa9a.999999.999.zip) into a folder. The stock boot.img file should be in this folder.
Patch the boot.img:
Open the Magisk Alpha/Beta/Canary/Delta/Stable App
The Update Channel should be set to Alpha/Beta/Canary/Delta/Stable, depending on the version you installed.
Tap Install (next to Magisk)
Tap, Select and Patch a File
Select the boot.img file you extracted from the factory image.
Tap the ✓ (Check Mark)
Tap Let's Go
When you see done, the boot.img has been patched (magisk_patched_xxxxxx.img), and is stored in the download folder.
Reboot
Copy/Move the magisk_patched....img file to your computer's Platform-tools folder or the folder that has fastboot.exe in it:
Sideload the OTA zip file
Boot Recovery mode
With the device powered on and USB debugging enabled, type: fastboot reboot recovery
If you're unable to use fastboot to reboot into recovery, you can use the key combination for your device: Press and hold Volume Down button, then press and hold Power button then use the Volume Down/Up button to select the Recovery option from the menu.
The device is now in recovery mode an Android logo with red exclamation mark should be on the screen.
Access the recovery menu:
Type: fastboot reboot fastbootd and press enter.
The recovery text menu will appear.
If you're unable to use fastboot to boot the recovery menu, you can use the key combination for your device: Hold the Power button and press Volume button up once. The recovery text menu will appear.
Connect the phone to the PC via USB cable
Enter sideload mode:
Select the Apply update from ADB option from the recovery text menu
(Optional) Verify Computer sees your device:
Type: adb devices and press return.
Your device number should shows up with "sideload" next to it.
Sideload the OTA zip file
Type:
adb sideload redfin-ota-aa9a.999999.999-a99999aa.zip and press enter.
Once sideloading finishes, reboot the phone by choosing Reboot system now option on the The recovery text menu.
Note: This slot is bootable and NOT ROOTED
Sideload the OTA zip file to the other slot and Root it.
Boot Recovery mode
With the device powered on and USB debugging enabled, type: fastboot reboot recovery
The device is now in recovery mode an Android logo with red exclamation mark should appear on screen.
If you're unable to use adb to reboot into recovery, you can use the key combination for your device: Press and hold Volume Down button, then press and hold Power button then use the Volume Down/Up button to select Recovery option from the menu.
The device is now in recovery mode an Android logo with red exclamation mark should appear on screen.
Access the recovery menu:
Type: fastboot reboot fastbootd and press enter.
The recovery text menu will appear.
If you're unable to use fastboot to boot the recovery menu, you can use the key combination for your device: Hold the Power button and press Volume button up once.
The recovery text menu will appear.
Enter sideload mode:
Select the Apply update from ADB option from the recovery text menu
Sideload the OTA zip file
Type: adb sideload redfin-ota-aa9a.999999.999-a99999aa.zip at the prompt and press enter.
Once sideloading finishes, choose Reboot system now option on the The recovery text menu.
Flash boot.img to root
On the phone: Boot bootloader/fastboot mode
On the PC:
Open a Command Prompt in the SDK Platform-tools folder.
Type: fastboot flash boot magic_patched....img at the Prompt and press enter.
Type: fastboot reboot at the Prompt and press enter.
Disconnect the phone from the PC.
Note: This slot is bootable and rooted.
Done!
Extract Files from Factory Image flash-all.bat boot/init_boot.img
Extract Files from Factory Image
Extract flash-all.bat and boot.img file
Download the latest Factory image to your phone.
Extract the Factory Image file (redfin-r2d1a.999999.999-factory-99a9a99a.zip) to a folder. The, stock, flash-all.bat file should be in this folder.
Open the folder you extracted the Factory image to and, extract the Image file (image-redfin-aa9a.999999.999.zip) into the folder. The, stock, boot/init_boot.img file should be in this folder.
Flash boot/init_boot.img
Flashing the boot.img removes root.
Open the folder you extracted the 'image...zip' file to and copy the boot.img file to your computer's platform-tools folder or to the folder that has fastboot.exe in it.
Boot fastboot mode
Connect the phone to the Computer
Open a Command Prompt and type the following command at the prompt:
fastboot flash boot --slot all boot.img
Reboot
Root/Reroot with Magisk and Pass SafetyNet.
Android 13
Upgrade to Android 13: OP, Part II - INSTRUCTIONS, 2. Install/Update Factory Image keep data or wipe data, Keep data
Patching the boot.img - to root/reroot.
If your phone was previously rooted, DO NOT repeat DO NOT install another Magisk Manager app. Do this before you patch the boot/init_boot image:
Open the Magisk Manager app and disable all Magisk modules. If you hid the Magisk manager app the default name for the hidden Magisk app is settings.
If you gave it a different name and you've forgotten the name. Use TB checker to find the name of the hidden Magisk Manager. You can also use TB Checker to check if you have more than one Magisk Manager app installed.
Extract the boot/init_boot.img file from the Factory Image.
Download the latest Factory image to your phone.
Extract the Factory Image file (redfin-a9a9a.999999.999-factory-99a9a99a.zip) to a folder.
Open the folder you extracted the Factory image to and extract the Image file (image-redfin-aa9a.999999.999.zip) into the folder. The, stock, boot/init_boot.img file should be in this folder.
Install Magisk Canary - Download app-release.apk
or
Magisk Beta/Stable App
Open Magisk Beta/Canary/Stable App
The Update Channel should be set to Beta/Canary/Stable, depending on the version you Installed.
Tap Install (next to Magisk)
Tap, Select and Patch a File
Select the boot.img file you extracted from the latest factory image.
Tap the ✓ (Check Mark)
Tap Let's Go
When you see done, the boot.img has been patched (magisk_patched_xxxxxx.img), and stored in the download folder.
Reboot
Copy/Move the patched boot.img file to your computer's Platform-tools folder or the folder that has fastboot.exe in it:
Copy it to a USB drive and transfer it to your computer.
Move it to your computer using adb push
Boot fastboot mode
Connect the phone to the Computer with USB cord.
Open a Command Prompt in the folder you copied the patched boot.img to.
Type fastboot flash boot "name of patched boot".img without the quote marks at the Prompt and press enter.
Type fastboot reboot at the Prompt and press enter.
Important, if your phone boot loops try one of the following options:
Flash the 'stock' boot.img to both slots: fastboot flash boot boot.img --slot all
Remove Modules
Press the Power button until the phone turns off.
Press the Power and Volume Down to boot the bootloader.
Open a Command Prompt in the SDK-Platform-tools folder or the folder that has adb.exe in it, and type adb wait-for-device shell magisk --remove-modules
fastboot Reboot.
Important, if the Magisk Manager app has the Superuser and Module buttons greyed out:
Read @badabing2003 post
Pass Safety Net with SafetyNet Fix
Download File(s)
Displax's latest SafetyNet Fix, a "fork" of kdrag0n safetynet-fix.
These are the NEW Magisk Module repositories:
Androidacy Module Manager
Androidacy Module Manager - Releases
Androidacy Download Center
This is the old Magisk Module repository:
https://github.com/Fox2Code/Fox Magisk Module Manager
Install Displax's safetyNet Fix
Open Magisk
Tap Modules icon
Tap Install from storage
Navigate to the Displax's SafetyNet Fix file you downloaded.
Tap the Displax's SafetyNet Fix file.
Tap the check mark (✓ at the bottom) to start the installation.
After it installs tap the Save icon to save the log
Tap Reboot.
Settings for Magisk Canary
Open Magisk App
Tap the Setup icon.
Scroll down to App and set the Update Channel to Canary.
Scroll down to Check Updates and enable it.
Scroll down to Magisk and enable Zygisk.
Enable Denylist
Tap Configure DenyList => Tap 3 Dot Menu => Check ✓ Show system apps => Check ✓ Google Play Store, Google Pay, Google Wallet etc.
(Optional) Scroll down to Superuser and enable Enable Biometric Authentication.
Get Device Certified
Turn Airplane mode on
Open Settings
Tap Apps & notifications
Tap see all...
Tap three dot menu
Tap Show system
Scroll to Google Play Store
Tap Storage and Cache
Tap Clear storage
Note: Repeat the 3 steps above for any app that needs Device Certification i.e., Google Play Services, Google Pay, Google Wallet, etc.
reboot
Turn Airplane mode off
Check Device Certification
Open Google Play Store app
Tap Menu - Circle top right
Tap Settings
Tap About
Check Play protect certification
It may take 24 hours for Device Certification to be updated.
Note: If after completeting Get Device Certified and Check Device Certification you've waited 24 hours your Device is not Certifed or your Device is Certified and certain Google Store apps (Google Pay, NetFliks, etc.) are not working. Use the Play Integrity API Checker app or the TB Checker - Safetynet and Root app to verify you are passing Play Integrity.
Set Magisk App Update Channel/Update Magisk
Set Magisk App Update Channel
Open Magisk App > Tap Settings icon > Update Channel > Select Stable, Beta, Canary or Custom.
Update Magisk
When Magisk App notifies you of an update:
Tap install.
Select, Direct Install (Recommended)
When it finishes installing
Tap, Save Log
Log location: /storage/emulated/0/Download
Tap, Reboot
Done!
Install/Update Magisk Modules
Download File(s)
Displax's latest SafetyNet Fix, a "fork" of kdrag0n safetynet-fix.
These are the NEW Magisk Module repositories:
Androidacy Module Manager
Androidacy Module Manager - Releases
Androidacy Download Center
This is the old Magisk Module repository:
https://github.com/Fox2Code/Fox Magisk Module Manager
LSposed Releases
Shamiko Releases
Install Modules from Storage
Open Magisk
Tap the Modules icon
Tap Install from storage
Navigate to the folder with the Module you want to install.
Tap the Module to highlite it and tap Select.
After it installs, tap the Disc Icon to save the install log.
Tap Reboot
Install Modules from Androidacy Module Manager
Open Androidacy Module Manager
Tap the Modules icon
Locate the Module you want to install
Tap Install
After it installs, tap the Disc Icon to save the install log.
Tap Reboot
Update Modules
Open Androidacy Module Manager
You, will see the Modules that have Updates.
Tap the Module you want to update.
Tap install.
After it installs, tap the Disc Icon to save the install log.
Tap Reboot
Open a Command Prompt/Boot Fastboot Mode/Boot Recovery
Open a Command Prompt on Computer
Open File Explorer, click the platform-tools folder ==> click the folder icon (left side of address bar) to highlight it type cmd and press enter.
Open a Powershell Command Prompt on Computer: Open File Explorer, click the platform-tools folder ==> click the folder icon (left side of address bar) to highlight it type powershell and press enter.
Notes:
Enable USB Debugging, on your phone: Settings ==> System ==> Advanced ==> Developer options ==> Scroll down to USB debugging and enable it.
When using the Powershell Command Prompt Commands must be preceeded with ./: i.e, ./fastboot devices
If you do not want to open a Command Prompt every time you want to use the fastboot command, add the path to the Platform-tools folder to Windows environment variables.
Boot fastboot mode (bootloader):
Power off phone, press and hold the power and volume down buttons until you see Start.
Boot Recovery
Power off phone, press and hold the power and volume down buttons until you see Start. Use volume up/down button until you see Recovery mode. Press power button.
Test fastboot
Enable Developer Options - Tap Settings > About phone > Build number 7 times or until you should see 'you are a Developer'.
Enable USB Debugging - Tap Settings > System > Advanced > Developer options >
Enable USB Debugging.
Open a Command Prompt on your computer in the Platform-tools folder.
Boot fastboot mode on your phone
Connect the phone to the Computer.
At the prompt type: fastboot devices to verify communication with phone. It should return your phone's serial number.
ADB Sideload
Stock Recovery
Full OTA Images for Nexus and Pixel Devices - Updating instructions
Custom Recovery TWRP
Waiting for Android 12 (S) T.W.R.P
~ ~ ~ Part III - OTHER ~ ~ ~
Custom ROMs
Need help with a Custom ROM?
If you are you are trying to install or have installed a Custom ROM, read and follow the Installation Instructions in the OP of the Custom ROM thread.
Search the thread of the Custom ROM you are trying to install or have installed for answer(s)/solution(s) to your question(s)/problem(s): If you don't find a answer(s)/solution(s) to your question(s)/problem(s). Post your question(s)/request(s) for help in the Custom ROM thread you are trying to install or have installed.
If you are trying to install a Addon(s) {Custom Kernel, Magisk, etc.} to the Custom ROM you installed: Search the thread of the Custom ROM you installed or the thread of the Addon you want to add to your Custom ROMfor answer(s)/solution(s) to your question(s)/problem(s). If you don't find an answer(s)/solution(s) to your question(s)/problem(s). Post your question(s)/request(s) for help in the Custom ROM or Addon (Custom Kernel, Magisk, etc.) thread.
ROMs
Google Pixel 5 ROMs, Kernels, Recoveries, & Other
Other Custom ROMs
lineageOS 20.0 for the Google Pixel 5 (redfin) Nightly
Themes, Apps, and Mods
Google Pixel 5 Themes, Apps, and Mods
T.W.R.P. Backup/Restore
Waiting for Android 13 T.W.R.P.
Thanks! Waiting for twrp now!
Sent from my Mi 9T Pro using Tapatalk
Hey, thanks for this super-detailed guide!
I just did this to my P5, however the guide was not clear on how to get Safetynet working.
After Magisk was installed and I confirmed that the device was rooted, I went to this other thread and followed the instructions for Safetynet at the very end of the first post. The downside seems to be that the device is identified as a Pixel 3A, but it got the Safetynet test to pass. I assume that this will be fixed someday.
kbaltodano said:
Hey, thanks for this super-detailed guide!
I just did this to my P5, however the guide was not clear on how to get Safetynet working.
After Magisk was installed and I confirmed that the device was rooted, I went to this other thread and followed the instructions for Safetynet at the very end of the first post. The downside seems to be that the device is identified as a Pixel 3A, but it got the Safetynet test to pass. I assume that this will be fixed someday.
Click to expand...
Click to collapse
I don't think so. Even this method is kinda kludged. Pixel 3a is the latest version not subject to the hardware check that prevented Safetynet check.
I'm assuming OTA updates will disable this root? So don't take any?
PRL77 said:
I'm assuming OTA updates will disable this root? So don't take any?
Click to expand...
Click to collapse
No OTA Update will not disable. Root
PRL77 said:
I'm assuming OTA updates will disable this root? So don't take any?
Click to expand...
Click to collapse
Yes, you will lose root if you take te OTA. The only way to keep root with OTA is do #7. D..
Jackie Coyote said:
No OTA Update will not disable. Root
Click to expand...
Click to collapse
Incorrect, Jackie. See Homeboy76's reply. I actually did a reset to factory defaults before posting this and it removed root. An OTA would do the same.
---------- Post added at 08:39 PM ---------- Previous post was at 08:11 PM ----------
Homeboy76 said:
Yes, you will lose root if you take te OTA. The only way to keep root with OTA is do #7. D..
Click to expand...
Click to collapse
Thanks for confirming my thoughts. And thanks for this guide, it is damn brilliant.
I'm not an expert but as far as i know that's not correct.
If you do a factory reset your boot image will not be overwritten so technically root is still there.
But the magisk app will be deleted because of the factory reset, the patched boot image should still be in place.
OTA overwrites those files so then it will be fully unrooted.
Pollie81 said:
I'm not an expert but as far as i know that's not correct.
If you do a factory reset your boot image will not be overwritten so technically root is still there.
But the magisk app will be deleted because of the factory reset, the patched boot image should still be in place.
OTA overwrites those files so then it will be fully unrooted.
Click to expand...
Click to collapse
I don't take OTAs . I flash factory images on Mondays. But I thought you can't even take OTAs without restoring the boot image first. Either through fastboot or Magisk itself?? Or I think you can flash the full OTA from Google's website. I'm pretty sure that will replace the boot image with stock.
My 3XL died, so I ordered a 5 unlocked from Amazon. In trying to unlock the bootloader with 'fastboot flashing unlock', I receive FAILED (remote: 'flashing unlock is not allowed'). How can I tell if I have an unlocked phone or is there something else I am missing?
vette8t7 said:
My 3XL died, so I ordered a 5 unlocked from Amazon. In trying to unlock the bootloader with 'fastboot flashing unlock', I receive FAILED (remote: 'flashing unlock is not allowed'). How can I tell if I have an unlocked phone or is there something else I am missing?
Click to expand...
Click to collapse
Did you toggle the unlock in developer settings? If you can't and it's greyed out, your out of luck. Are you on the bootloader screen when your fastbooting? You have updated platform tools?
vette8t7 said:
My 3XL died, so I ordered a 5 unlocked from Amazon. In trying to unlock the bootloader with 'fastboot flashing unlock', I receive FAILED (remote: 'flashing unlock is not allowed'). How can I tell if I have an unlocked phone or is there something else I am missing?
Click to expand...
Click to collapse
My bad, I enabled OEM Debugging, but not the Enable OEM Unlock. Bootloader is unlocked!
vette8t7 said:
My bad, I enabled OEM Debugging, but not the Enable OEM Unlock. Bootloader is unlocked!
Click to expand...
Click to collapse
Sweet! Glad you got it.
Jackie Coyote said:
I don't take OTAs . I flash factory images on Mondays. But I thought you can't even take OTAs without restoring the boot image first. Either through fastboot or Magisk itself?? Or I think you can flash the full OTA from Google's website. I'm pretty sure that will replace the boot image with stock.
Click to expand...
Click to collapse
The guide goes over this in Step 7D how it is possible on devices with A/B partitions but not those without them.
---------- Post added at 11:44 AM ---------- Previous post was at 10:54 AM ----------
Pollie81 said:
I'm not an expert but as far as i know that's not correct.
If you do a factory reset your boot image will not be overwritten so technically root is still there.
But the magisk app will be deleted because of the factory reset, the patched boot image should still be in place.
OTA overwrites those files so then it will be fully unrooted.
Click to expand...
Click to collapse
So you're saying that after I lost root on factory reset, all I needed to do was reinstall Magisk?
PRL77 said:
The guide goes over this in Step 7D how it is possible on devices with A/B partitions but not those without them.
---------- Post added at 11:44 AM ---------- Previous post was at 10:54 AM ----------
Unless I'm reading it incorrectly, that is no longer an option. Taking the OTA and installing Magisk to the inactive slot has been removed.
Click to expand...
Click to collapse
Jackie Coyote said:
PRL77 said:
The guide goes over this in Step 7D how it is possible on devices with A/B partitions but not those without them.
---------- Post added at 11:44 AM ---------- Previous post was at 10:54 AM ----------
Unless I'm reading it incorrectly, that is no longer an option. Taking the OTA and installing Magisk to the inactive slot has been removed.
Click to expand...
Click to collapse
I'm reading that some devices can be done that way while others cannot. This guide is linked in #7D: https://topjohnwu.github.io/Magisk/ota.html
I personally won't be doing it, I'll just re-root from scratch, but it does seem like an option.
Click to expand...
Click to collapse
PRL77 said:
Jackie Coyote said:
I'm reading that some devices can be done that way while others cannot. This guide is linked in #7D: https://topjohnwu.github.io/Magisk/ota.html
I personally won't be doing it, I'll just re-root from scratch, but it does seem like an option.
Click to expand...
Click to collapse
Yeah, I don't take OTAs. Just was wondering for clarification purposes. Install to inactive slot is not an option on my latest magisk canary build.
https://twitter.com/topjohnwu/status/1303574238796808192?s=19
Click to expand...
Click to collapse
Pollie81 said:
I'm not an expert but as far as i know that's not correct.
If you do a factory reset your boot image will not be overwritten so technically root is still there.
But the magisk app will be deleted because of the factory reset, the patched boot image should still be in place.
OTA overwrites those files so then it will be fully unrooted.
Click to expand...
Click to collapse
<Edit> You're right!
Homeboy76 said:
Are you sure the boot.img is not overwritten?
Why?
If the boot.img was not overwritten Magisk and Magisk Manager would still be on your phone.
The reason the boot.img is still there is it is stored on your computer i.e. C:/Platform-tools folder
A Factory reset wipes the phone's data & it's Internal Storage.
Click to expand...
Click to collapse
magisk manager is an app, the root itself is something that is changed in the boot image.
by a factory reset the system and boot image/partitions are not touched, only the data partition and internal storage if you choose so.
that clears everything exept the boot image, that's why if people would realy want to go back to stock they have to flash a stock/factory image.
because if you do that or OTA the boot image will be overwritten by the stock one.
[Guide] Root Pixel 7 Pro with Magisk + Unlock Bootloader + Pass SafetyNet + More
Android Security Bulletin—June 2023
Pixel Update Bulletin—June 2023
Introduction
This Guide is for Pixel 7 Pro owners that want to Root their phone, and enjoy the benefits of rooting it. The Guide is divided into three parts: Information, Instructions, and Other.
~ ~ ~ Part I - INFORMATION ~ ~ ~
Disclaimer
I assume no responsibility for the malfunctioning/bricking of your phone.
If you choose to use a Custom Kernels, Custom ROM, etc. You should read the Installation Instructions in their thread before using this guide or attempting to install them. Additionally, the order of listed items i.e., Custom Kernels, Custom ROMS, etc. Does not indicate my preference for them. It is your responsibility to do the research before selecting them.
Prerequisites
A Pixel 7 Pro phone with an unlockable bootloader.
The latest Android 13 Factory or OTA Image: "cheetah" for Pixel 7 Pro
Factory Image
a. 13.0.0 (TQ3A.230605.012, Jun 2023)b. 13.0.0 (TQ3A.230605.012.A1, Jun 2023, Verizon, Verizon MVNOs)c. Which one should I use?
OTA Image
a. 13.0.0 (TQ3A.230605.012, Jun 2023)b. 13.0.0 (TQ3A.230605.012.A1, Jun 2023, Verizon, Verizon MVNOs)c. Which one should I use?
A Computer with the latest working SDK Platform-tools 33.0.3 installed.
Important Notes:
a. Before installing SDK Platform-tools, check for older versions of fastboot on your computer: Open a Command prompt and type fastboot --version at the prompt. If a adb/fastboot is found delete the folder containing them. Also, check the path environment for paths to them and remove it.
b. Update Platform Tools, regularly, for optimal performance.
c. Need Google's USB Drivers for your Pixel Phone?
NEW
Both Slots Bootable
@badabing2003 has found a way to Have both slots bootable.
He has automated the procedure and added it to PixelFlasher.
@Lughnasadh tested the Both Slots Bootable procedure on his Google Pixel 7 Pro and Google Pixel 6 Pro phones: It works!
Android 14 Beta are up.
Builds are only available for the following Pixel devices:
Google Pixel 4a5(G)
Google Pixel 5 and 5a
Google Pixel 6 and 6 Pro
Google Pixel 6a
Google Pixel 7 and 7 Pro
* * * 64-bit-only system images * * *
Google Pixel 4a (5G)
Google Pixel 5
Google Pixel 6
Google Pixel 6 Pro
Android 14 GSI binaries and release
Pixel 4a5(G)
Pixel 5 and 5a
Pixel 6 and 6 Pro
Pixel 6a Pro
Pixel 7 and 7 Pro
Update(s)
Factory/OTA Images - 13 June
Android 14 DP
Factory images and OTA images
Android 14 GSI binaries and release
Magisk Alpha - app-release_709f25f6-26101.apk 12 Apr
Magisk Beta - Magisk v26.1.apk 11 Apr
Magisk Canary - app-release_a8c4a33e-26103.apk 23 Jun
Magisk Cygisk - Click Pages 5 for installation Instructions.
Magisk Delta -
app-release
Magisk Stable - Magisk v26.1.apk 11 Apr
SafetyNet - Displax's SafetyNet Fix, v2.4.0-MOD_1.3 17Jun
SDK Platform-tools 33.0.3 Aug 2022
Custom Kernels
a. Google Pixel 7 Pro ROMs, Kernels, Recoveries, & Otherb. ElementalX Kernel Manager
My Other Guides
Pixel 6
Pixel 5
Pixel 4a (5G)
Pixel 4 XL
Pixel 3 XL
Pixel 1 XL
Credits/Thanks/Recognitions
@topjohnwu - Magisk.
@Lughnasadh - for his many helpful contributions to this thread.
@badabing2003 - for Pixel Flasher and for his many helpful contributions to this thread.
Those I may have, inadvertently, forgotten.
~ ~ ~ Part II - INSTRUCTIONS ~ ~ ~
(The Instructions listed below are not steps, they are individual sets of instructions.)
Unlock Bootloader/Return Phone to Stock/Lock Bootloader
Unlock Bootloader
This will erase all user data from the device!
Backup your data
Activate Developer Options: Tap Settings > About Phone > Tap Build Number 7 times or until you see you are a Developer. Tap back > System > Advanced > Developer Options. Enable OEM Unlock and, USB Debugging.
Boot fastboot mode
Connect the phone to the Computer with USB cord.
Open a Command Prompt on your computer and type fastboot flashing unlock and press enter.
You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
Allow the process to complete and then type fastboot reboot at the Command Prompt and press enter.
When your phone reboots disconnect your usb cable.
Notes: After unlocking your bootloader, you'll see a warning: The bootloader is unlocked and... You will see this warning until, you relock the bootloader.
Do not relock your bootloader until you have returned the device to Stock.
Return Phone to Stock
Backup your data/Internal storage
Use the Android flash tool:
select Wipe => Force Flash Partitions => Lock Bootloader.
Lock Bootloader
If your phone is not 100 percent stock do Return Phone to Stock. If you don't you may brick your phone.
This will erase all user data from the device!
Boot fastboot mode
Open a Command Prompt and type this at the Prompt: fastboot flashing lock
You should see a request for confirmation on your phone, use the volume keys to scroll and the power key to select.
Allow the process to complete, then type this at the Command Prompt: fastboot reboot
Enable Developer Options: Settings > About phone > Tap Build number 7 times or until you see 'you are a developer'.
Tap Back > Developer options and toggle OEM Unlock off.
Manually Install/Update Factory Image keep data or wipe data
Important Note(s):
If you haven't updated your phones Factory image in a while. It is not necessary to flash all the missed images in succession. Flash the latest Factory image.
If your phone was previously rooted, open Magisk manager and disable all Magisk modules. If you hid the Magisk manager app the default name for the hidden Magisk app is settings.
If you are uncomfortable manually flashing the Factory image, see Use Pixelflasher...below.
Always verify you have the latest working version of SDK Platform-Tools installed on your computer.
If you get an error while flashing, try one of these options:
Change the USB port to a non charging USB port.
Change the USB cord.
Change Computers.
If you phone bootloops
Press the Power button until the phone turns off.
Press the Power and Volume Down to boot the bootloader.
Open a Command Prompt in the SDK-Platform-tools folder or the folder that has adb.exe in it, and type adb wait-for-device shell magisk --remove-modules
fastboot Reboot
Backup your data
Download the latest Factory Image: Pixel 7 Pro - cheetah to your Computer.
Go to Part II - INSTRUCTIONS => 4. Extract the flash-all.bat and the init_boot.img files from the Factory Image.
Flash Factory Image Keep Data
Upgrading Android 13
* E D I T - flash-all.bat file *
Flash to current/Active Slot.
@Echo off
PATH=%PATH%;"%SYSTEMROOT%\System32"
fastboot flash bootloader bootloader-cheetah-aaaaaa-9.9-9999999.img
fastboot reboot-bootloader
ping -n 5 127.0.0.1 >nul
fastboot flash radio radio-cheetah-a9999a-999999-999999-a-9999999.img
fastboot reboot-bootloader
ping -n 5 127.0.0.1 >nul
fastboot update image-cheetah-aa9a.999999.999.zip
Note:The -w is removed to Keep Data.
echo Press any key to exit...
pause >nul
exit
Note: It is a good idea to flash the Google factory image to both slots (A & B) when Upgrading to a new Android Version.
See Flash Other Slot bat file... below, to flash to the other/inactive slot.
* * * * E N D - Edit * * * *
Updating Android 13
Flash to Other/Inactive Slot.
Note: See Flash Other Slot bat file... below.
* * * * * E N D * * * * *
Flash Other Slot bat file - Save as flash-other.bat
Note: To run this file type flash-other at the Command Prompt.
ECHO OFF
PATH=%PATH%;"%SYSTEMROOT%\System32"
echo This is the slot you are currently on.
fastboot getvar current-slot
echo Press any key to continue...
pause >nul
fastboot --set-active=other
fastboot reboot-bootloader
ping -n 5 127.0.0.1 >nul
echo This is the slot you switched to.
fastboot getvar current-slot
echo Press any key to continue...
pause >nul
flash-all
exit
* * E N D - Creating File * *
After, you have edited the flash-all.bat file. Copy/Move these files to the Platform-tools folder:
bootloader-cheetah-....img
flash-all.bat
image-cheetah-....zip
radio-cheetah-....img
On your phone: Boot the bootloader (Power off the phone => Press the Power and Down buttons until you see Start)
Connect your phone to the computer.
Open a Command Prompt on your computer in the Platform-tools folder and type: flash-all at the Command Prompt and press enter.
The phone will reboot when flashing is completed.
Go-to Part II - INSTRUCTIONS => 5. Root/Reroot with Magisk and Pass SafetyNet, • Patching the init_boot.img - to root/reroot.
Flash Factory Image Wipe Data
This will wipe your phone's Data/Internal Storage.
Do not edit the flash-all.bat file.
If you need to disable Verity and Verification: See Disabling Verity and Verification below.
Disabling Verity and Verification
* E D I T - flash-all.bat file *
@Echo off
PATH=%PATH%;"%SYSTEMROOT%\System32"
fastboot --set-active=other
fastboot reboot-bootloader
fastboot flash bootloader bootloader-cheetah-aaaaaa-9.9-9999999.img
fastboot reboot-bootloader
ping -n 5 127.0.0.1 >nul
fastboot flash radio radio-cheetah-a99999-999999-999999-a-9999999.img
fastboot reboot-bootloader
ping -n 5 127.0.0.1 >nul
fastboot - w update --disable-verity --disable-verification image-cheetah-AA1A.999999.999.A9.zip
echo Press any key to exit...
pause >nul
exit
Notes:
The first time you Disable Verity and Verification it will wipe your Data/Internal Storage.
When doing Subsequent updates and disabling Verity and Verification, the -w flag can be removed to Keep Data.
Once you start Disabling Verity and Verification you should continue doing it. If you skip disabling one time. The next time you Disable Verity and Verification it will wipe your phone.
Some kernels require Disabling verity and verification
To flash the Factory image to both slots (A & B) see Flash Other Slot bat file... above.
* * * * E N D - Edit * * * *
Open the folder you extracted the Factory Image to and Copy/Move these files to the Platform-tools folder:
bootloader-cheetah-....img
flash-all.bat
image-cheetah-....zip
radio-cheetah-....img
On your phone: Boot the bootloader (Power off the phone => Press the Power and Down buttons until you see Start)
Connect your phone to the computer.
Open a Command Prompt on your computer in the Platform-tools folder and type: flash-all at the Command Prompt and press enter.
The phone will reboot when flashing is complete.
Setup phone
Enable Developer Mode and USB Debugging
Setup => About phone => Tap Build number 7 times or until you see you are a 'Devloper'.
Setup => System => Developer options => Enable Developer options => enable USB Debugging
Go-to Part II - INSTRUCTIONS => 5. Root/Reroot with Magisk and Pass SafetyNet, • Patching the boot.img - to root/reroot.
If you are uncomfortable manually Use PixelFlasher by @badabing2003
PixelFlasher for Google Pixel 7 Pro Support Thread
(NEW) Make Both Slots Bootable: Manually, Flash the OTA Image to Both Slots - One bootable and rooted, the other slot bootable without root.
Before you start
Backup your data
Make sure that there is no pending OTA update, by going to Settings > About phone > System updates, which should say Your system is up to date.
Download the latest Factory and OTA image for your device.
Verify the checksum of the Factory and OTA image. The last portion of the filename is the first 8 digits of its SHA-256 checksum; the full SHA-256 checksum is shown next to the download link.
Extract the boot/init_boot.image from the Factory image:
Extract the Factory Image file that you downloaded (cheetah-a9a9a.999999.999-factory-99a9a99a.zip) into a folder.
Open the folder you extracted the Factory image to and extract the Image file (image-cheetah-aa9a.999999.999.zip) into a folder. The stock init_boot.img file should be in this folder.
Patch the init_boot.img:
Open the Magisk (Alpha/Beta/Canary/Delta/Stable) App
The Update Channel should be set to Alpha/Beta/Canary/Delta/Stable, depending on the version you installed.
Tap Install (next to Magisk)
Tap, Select and Patch a File
Select the init_boot.img file you extracted from the factory image.
Tap the ✓ (Check Mark)
Tap Let's Go
When you see done, the init_boot.img has been patched (magisk_patched_xxxxxx.img), and is stored in the download folder.
Reboot
Copy/Move the magisk_patched....img file to your computer's Platform-tools folder or the folder that has fastboot.exe in it:
Sideload the OTA zip file
Boot Recovery mode
With the device powered on and USB debugging enabled, type: adb reboot recovery
If you're unable to use adb to reboot into recovery, you can use the key combination for your device: Press and hold Volume Down button, then press and hold Power button then use the Volume Down/Up button to select the Recovery option from the menu.
The device is now in recovery mode an Android logo with red exclamation mark should be on the screen.
Access the recovery menu:
Hold the Power button and press Volume up button up once. The recovery text menu will appear.
Connect the phone to the PC via USB cable
Enter sideload mode:
Select the Apply update from ADB option from the recovery text menu
(Optional) Verify Computer sees your device:
Type: adb devices and press return.
Your device number should shows up with "sideload" next to it.
Sideload the OTA zip file
Select the Apply update from ADB option from the recovery text menu
Type:
adb sideload cheetah-ota-aa9a.999999.999-a99999aa.zip and press enter.
Once sideloading finishes, reboot the phone by choosing Reboot system now option on the The recovery text menu.
Note: This slot is bootable and NOT ROOTED
Sideload the OTA zip file to the other slot and Root it.
Boot Recovery mode
With the device powered on and USB debugging enabled, type: adb reboot recovery
If you're unable to use adb to reboot into recovery, you can use the key combination for your device: Press and hold Volume Down button, then press and hold Power button then use the Volume Down/Up button to select the Recovery option from the menu.
The device is now in recovery mode an Android logo with red exclamation mark should be on the screen.
Access the recovery menu:
Hold the Power button and press Volume up button up once. The recovery text menu will appear.
Connect the phone to the PC via USB cable
Enter sideload mode:
Select the Apply update from ADB option from the recovery text menu
Sideload the OTA zip file
Type: adb sideload cheetah-ota-aa9a.999999.999-a99999aa.zip at the prompt and press enter.
Once sideloading finishes, choose Reboot system now option on the The recovery text menu.
Flash Magisk_patched....img to root
On the phone: Boot bootloader/fastboot mode
On the PC:
Open a Command Prompt in the SDK Platform-tools folder.
Type: fastboot flash init_boot magic_patched....img at the Prompt and press enter.
Type: fastboot reboot at the Prompt and press enter.
Disconnect the phone from the PC.
Note: This slot is bootable and ROOTED.
Done!
Extract the flash-all.bat and the boot/init_boot.img files from the Factory Image
Download the latest Factory image to your phone.
Extract the Factory Image file (cheetah-a9a9a.999999.999-factory-99a9a99a.zip) to a folder. The, stock, flash-all.bat file should be in this folder.
Open the folder you extracted the Factory image to and extract the Image file (image-cheetah-aa9a.999999.999.zip) into the folder. The, stock, init_boot.img file should be in this folder.
Root/Reroot with Magisk and Pass SafetyNet.
Android 13
Upgrade to Android 13: OP, Part II - INSTRUCTIONS, 2. Install/Update Factory Image keep data or wipe data, Keep data
Patching the boot/init_boot.img - to root/reroot.
If your phone was previously rooted, DO NOT repeat DO NOT install another Magisk Manager app. Do this before you patch the boot/init_boot image:
Open the Magisk Manager app and disable all Magisk modules. If you hid the Magisk manager app the default name for the hidden Magisk app is settings.
If you gave it a different name and you've forgotten the name. Use TB checker to find the name of the hidden Magisk Manager. You can also use TB Checker to check if you have more than one Magisk Manager app installed.
Extract the boot/init_boot.img file from the Factory Image.
Download the latest Factory image to your phone.
Extract the Factory Image file (cheetah-a9a9a.999999.999-factory-99a9a99a.zip) to a folder.
Open the folder you extracted the Factory image to and extract the Image file (image-cheetah-aa9a.999999.999.zip). The, stock, boot/init_boot.img file should be in this folder.
Install Magisk Canary - Download app-release.apk
or
Magisk Beta/Stable App
Open Magisk Beta/Canary/Stable App
The Update Channel should be set to Beta/Canary/Stable, depending on the version you Installed.
Tap Install (next to Magisk)
Tap, Select and Patch a File
Select the init_boot.img file you extracted from the latest factory image.
Tap the ✓ (Check Mark)
Tap Let's Go
When you see done, the init_boot.img has been patched (magisk_patched_xxxxxx.img), and is stored in the download folder.
Reboot
Copy/Move the magisk_patched....img file to your computer's Platform-tools folder or the folder that has fastboot.exe in it:
Copy it to a USB drive and transfer it to your computer.
Move it to your computer using adb push
Boot fastboot mode
Connect the phone to the Computer with USB cord.
Open a Command Prompt in the folder you copied the patched boot.img to.
Type fastboot flash init_boot magic_patched....img at the Prompt and press enter.
Type fastboot reboot at the Prompt and press enter.
Important, if your phone boot loops try one of the following options:
Flash the 'stock' init_boot.img to both slots: fastboot flash init_boot --slot all init_boot.img
Remove Modules
Press the Power button until the phone turns off.
Press the Power and Volume Down to boot the bootloader.
Open a Command Prompt in the SDK-Platform-tools folder or the folder that has adb.exe in it, and type adb wait-for-device shell magisk --remove-modules
fastboot Reboot.
Important, if the Magisk Manager app has the Superuser and Module buttons greyed out:
Read @badabing2003 post
Pass Safety Net with SafetyNet Fix
Download File(s)
Displax's latest SafetyNet Fix, a "fork" of kdrag0n safetynet-fix.
These are the NEW Magisk Module repositories:
Androidacy Module Manager
Androidacy Module Manager - Releases
Androidacy Download Center
This is the old Magisk Module repository:
https://github.com/Fox2Code/Fox Magisk Module Manager
Install Displax's safetyNet Fix
Open Magisk
Tap Modules icon
Tap Install from storage
Navigate to the Displax's SafetyNet Fix file you downloaded.
Tap the Displax's SafetyNet Fix file.
Tap the check mark (✓ at the bottom) to start the installation.
After it installs tap the Save icon to save the log
Tap Reboot.
Settings for Magisk
Open Magisk App
Tap the Setup icon.
Scroll down to App and set the Update Channel to Canary.
Scroll down to Check Updates and enable it.
Scroll down to Magisk and enable Zygisk.
Enable Denylist
Tap Configure DenyList => Tap 3 Dot Menu => Check ✓ Show system apps => Check ✓ Google Play Store, Google Pay, Google Wallet etc.
(Optional) Scroll down to Superuser and enable Enable Biometric Authentication.
Get Device Certified
Turn Airplane mode on
Open Settings
Tap Apps & notifications
Tap see all...
Tap three dot menu
Tap Show system
Scroll to Google Play Store
Tap Storage and Cache
Tap Clear storage
Note: Repeat the 3 steps above for any app that needs Device Certification i.e., Google Play Services, Google Pay, Google Wallet, etc.
reboot
Turn Airplane mode off
Check Device Certification
Open Google Play Store app
Tap Menu - Circle top right
Tap Settings
Tap About
Check Play protect certification
It may take 24 hours for Device Certification to be updated.
Note: If after completeting Get Device Certified and Check Device Certification you've waited 24 hours your Device is not Certifed or your Device is Certified and certain Google Store apps (Google Pay, NetFliks, etc.) are not working. Use the Play Integrity API Checker app or the TB Checker - Safetynet and Root app to verify you are passing Play Integrity.
Set Magisk App Update Channel/Update Magisk
Set Magisk App Update Channel
Open Magisk App > Tap Settings icon > Update Channel > Select Stable, Beta, Canary or Custom.
Update Magisk
When Magisk App notifies you of an update:
Tap install.
Select, Direct Install (Recommended)
When it finishes installing
Tap, Save Log
Log location: /storage/emulated/0/Download
Tap, Reboot
Done!
Install/Update Magisk Modules
Download Modules
These are the NEW Magisk Module repositories:
Androidacy Module Manager
Androidacy Module Manager - Releases
Androidacy Download Center
This is the old Magisk Module repository:
https://github.com/Fox2Code/Fox Magisk Module Manager
LSposed Releases
Shamiko Releases
Install Modules from Storage
Open Magisk
Tap the Modules icon
Tap Install from storage
Navigate to the folder with the Module you want to install.
Tap the Module to highlite it and tap Select.
After it installs, tap the Disc Icon to save the install log.
Tap Reboot
Install Modules from Androidacy Module Manager
Open Androidacy Module Manager
Tap the Modules icon
Locate the Module you want to install
Tap Install
After it installs, tap the Disc Icon to save the install log.
Tap Reboot
Update Modules
Open Androidacy Module Manager
You, will see the Modules that have Updates.
Tap the Module you want to update.
Tap install.
After it installs, tap the Disc Icon to save the install log.
Tap Reboot
Open a Command Prompt/Boot Fastboot Mode/Boot Recovery
Open a Command Prompt on Computer
Open File Explorer, click the platform-tools folder ==> click the folder icon (left side of address bar) to highlight it type cmd and press enter.
Open a Powershell Command Prompt on Computer: Open File Explorer, click the platform-tools folder ==> click the folder icon (left side of address bar) to highlight it type powershell and press enter.
Notes:
Enable USB Debugging, on your phone: Settings ==> System ==> Advanced ==> Developer options ==> Scroll down to USB debugging and enable it.
When using the Powershell Command Prompt Commands must be preceeded with ./: i.e, ./fastboot devices
If you do not want to open a Command Prompt every time you want to use the fastboot command, add the path to the Platform-tools folder to Windows environment variables.
Boot fastboot mode (bootloader):
Power off phone, press and hold the power and volume down buttons until you see Start.
Boot Recovery
Power off phone, press and hold the power and volume down buttons until you see Start. Use volume up/down button until you see Recovery mode. Press power button.
Test fastboot
Enable Developer Options - Tap Settings > About phone > Build number 7 times or until you should see 'you are a Developer'.
Enable USB Debugging - Tap Settings > System > Advanced > Developer options >
Enable USB Debugging.
Open a Command Prompt on your computer in the Platform-tools folder.
Boot fastboot mode on your phone
Connect the phone to the Computer.
At the prompt type: fastboot devices to verify communication with phone. It should return your phone's serial number.
ADB Sideload
Stock Recovery
Full OTA Images for Nexus and Pixel Devices - Updating instructions
Custom Recovery TWRP
Waiting for Android 13 (R) T.W.R.P
~ ~ ~ Part III - OTHER ~ ~ ~
Custom ROMs
Need help with a Custom ROM?
If you are you are trying to install or have installed a Custom ROM, read and follow the Installation Instructions in the OP of the Custom ROM thread.
Search the thread of the Custom ROM you are trying to install or have installed for answer(s)/solution(s) to your question(s)/problem(s): If you don't find a answer(s)/solution(s) to your question(s)/problem(s). Post your question(s)/request(s) for help in the Custom ROM thread you are trying to install or have installed.
If you are trying to install a Addon(s) {Custom Kernel, Magisk, etc.} to the Custom ROM you installed: Search the thread of the Custom ROM you installed or the thread of the Addon you want to add to your Custom ROMfor answer(s)/solution(s) to your question(s)/problem(s). If you don't find an answer(s)/solution(s) to your question(s)/problem(s). Post your question(s)/request(s) for help in the Custom ROM or Addon (Custom Kernel, Magisk, etc.) thread.
ROMs
Google Pixel 7 Pro ROMs, Kernels, Recoveries, & Other
Other Custom ROMs
GrapheneOS
Themes, Apps, and Mods
Google Pixel 7 Pro Themes, Apps, and Mods
T.W.R.P. Backup/Restore
Waiting for Android 13 T.W.R.P.
Reserved
Double-check your root command, I guess it's wrong. Instead of fastboot flash boot init_boot magic_patched....img, it should be fastboot flash init_boot magic_patched....img
Also for unlocking the bootloader, aren't you supposed to reboot into bootloader mode? Your instructions say "Boot fastboot mode". You can't actually run the unlock command in fastboot mode.
Kkooly said:
Also for unlocking the bootloader, aren't you supposed to reboot into bootloader mode? Your instructions say "Boot fastboot mode". You can't actually run the unlock command in fastboot mode.
Click to expand...
Click to collapse
When you boot the bootloader you are in fastboot mode
Oh Sorry! I thought when you ran "adb reboot fastboot" it went into fastboot mode I had to run "adb reboot bootloader". So they both are technically fastboot then? my bad!
binary**# said:
Double-check your root command, I guess it's wrong. Instead of fastboot flash boot init_boot magic_patched....img, it should be fastboot flash init_boot magic_patched....img
Click to expand...
Click to collapse
Thank you for this!
Kkooly said:
Oh Sorry! I thought when you ran "adb reboot fastboot" it went into fastboot mode I had to run "adb reboot bootloader". So they both are technically fastboot then? my bad!
Click to expand...
Click to collapse
This article will help you understand bootloader mode/fastboot mode:
How to Enter Fastboot Mode on Android Devices | Bootloader Mode
Kkooly said:
Oh Sorry! I thought when you ran "adb reboot fastboot" it went into fastboot mode I had to run "adb reboot bootloader". So they both are technically fastboot then? my bad!
Click to expand...
Click to collapse
yeah...when I first was rooting pixel (back for my pixel 2), it was quite confusing that you would "reboot [to] bootloader" to boot into "fastboot" mode (being counter-intuitive to re"boot" into something else when trying to simultaneously "boot" the original intended ), and all of this is NOT done in recovery mode (which is for something completely different) like I had gotten familiar with doing for my Galaxy S5 (which is where one would do all the "rooting" commands and what-not).... pretty confusing...
that and figuring out the two different slots, active/inactive thing was most confusing!
ro.product.first_api_level must be 32 or less to pass safetynet
I wonder when we will have custom kernel/rom that reenables miracast
Anyone with Magisk Delta currently have it working with safety net?
ihavenolifee said:
Anyone with Magisk Delta currently have it working with safety net?
Click to expand...
Click to collapse
there's a lot happening getting safety net to completely pass right now. There's a lot of "test" module fixes based off of Displax's USNF that have all had varying degrees of working -- the most established fix to be working (specifically for the P7P) is his original "test" fix; not his MOD 2.0 fix he has published right now.
In any case, you should check out the last 3-4 pages of the thread below and/or check out the OP to see directly which fix seems to work; be warned that you will not use Magisk Delta and from the OP you'll see how it's a "fluid" situation right now and there's a lot of back and forth as to what's working and what's not.
June 20, 2023 TQ3A.230605.012.A1 Verizon/MVNOs / June 13, 2023 TQ3A.230605.012 Global - Unlock bootloader / Root Pixel 7 Pro [Cheetah] / SafetyNet
Pixel 7 Pro [Cheetah] Updated May 13, 2023 Note that more than three users have said that 34.0.1 (even May 10, 2023's binary update of 34.0.1) did not work correctly for them. I recommend sticking with 33.0.3 (just below these quotes) Someone...
forum.xda-developers.com
simplepinoi177 said:
there's a lot happening getting safety net to completely pass right now. There's a lot of "test" module fixes based off of Displax's USNF that have all had varying degrees of working -- the most established fix to be working (specifically for the P7P) is his original "test" fix; not his MOD 2.0 fix he has published right now.
In any case, you should check out the last 3-4 pages of the thread below and/or check out the OP to see directly which fix seems to work; be warned that you will not use Magisk Delta and from the OP you'll see how it's a "fluid" situation right now and there's a lot of back and forth as to what's working and what's not.
June 20, 2023 TQ3A.230605.012.A1 Verizon/MVNOs / June 13, 2023 TQ3A.230605.012 Global - Unlock bootloader / Root Pixel 7 Pro [Cheetah] / SafetyNet
Pixel 7 Pro [Cheetah] Updated May 13, 2023 Note that more than three users have said that 34.0.1 (even May 10, 2023's binary update of 34.0.1) did not work correctly for them. I recommend sticking with 33.0.3 (just below these quotes) Someone...
forum.xda-developers.com
Click to expand...
Click to collapse
I found this earlier and found the test module to work for now.
thanks for the reply though!
Upgrading from P4XL and was looking for the standard @Homeboy76 thread and here we are ! Thanks again. Will be my bookmark for the next couple of years
I'm so glad to see this here. Your guides are detailed and easy to follow. Thank you.
i'm on TD1A.220804.031, Oct 2022 already unlocked my bootloader but eevry time i tried this command "fastboot flash init_boot ***.img" it give me this error "FAILED (remote: 'failed to flash partition (init_boot_a)')" i also tried this one "fastboot flash boot magisk_pat***.img --slot all" this one doesn't give me any error but when i boot back to android magisk doesn't detect a patched boot, don't know what to do i've rooted many devices before including the pixel 6 pro and never had this issue before :C
J0nhy said:
i'm on TD1A.220804.031, Oct 2022 already unlocked my bootloader but eevry time i tried this command "fastboot flash init_boot ***.img" it give me this error "FAILED (remote: 'failed to flash partition (init_boot_a)')" i also tried this one "fastboot flash boot magisk_pat***.img --slot all" this one doesn't give me any error but when i boot back to android magisk doesn't detect a patched boot, don't know what to do i've rooted many devices before including the pixel 6 pro and never had this issue before :C
Click to expand...
Click to collapse
"...it give me this error "FAILED (remote 'failed to flash partition (init_boot_a)')" Strange!
When I got that error it was because I patched the boot.img instead of the init_boot.img and tried to flash it with fastboot flash init_boot magisk_patched...img.
@Homeboy76 The links under OTA images section in Prerequisites are generating downloads for an Oriole build:
"oriole-ota-tp1a.221005.002-5e69c530.zip"
That has to be a mistake right?
klark1kent said:
@Homeboy76 The links under OTA images section in Prerequisites are generating downloads for an Oriole build:
"oriole-ota-tp1a.221005.002-5e69c530.zip"
That has to be a mistake right?
Click to expand...
Click to collapse
It is a mistake, thanks for the feed back.
It is fixed.