Hi:
In all my phones with pure android (Nexus 5, Nokia 8) whenever the phone connects to a guest wi-fi that needs authentication via a captive portal (Fonera wi-fi, for example), they keep the operator data connection active until i authenticate on the wi-fi network and get a internet connection.
On the OnePlus 8 i just got recently this does not happen. As soon it connects to the wi-fi network, it disables the operator network data and i loose internet connection until i authenticate on the wi-fi network. Is there any hidden option to correct this behavior?
Regards.
Related
Hi there,
I have a question about an annoying problem that I've only managed to find one (unanswered) question to on the web.
I have an HTC Touch HD (WM6.1) which I use to read email from my Hotmail account, amongst other things. The problem is that the messaging client ALWAYS tries to download my mail via 3G/GPRS even when there's a WiFi connection available. This occurs both when I initiate the send/receive using TouchFlo 3D or from within the mail client.
Connection manager is, as far as I'm aware, configured correctly, and PIE/Opera/weather will all happily use WiFi to connect to the internet, only using my data connection when WiFi isn't available.
The same results occur with connection manager configured in either of the following ways:
Internet Connection = "My ISP" settings with 3G modem connection
Work Connection = Default "My Work Network" settings
WiFi Access Point = Connects to Internet
Network Card = Connects to Internet
OR
Internet Connection = "My Work Network" with 3G modem connection and "This network connects to the internet" enabled
Work Connection = As Internet Connection
WiFi Access Point = Connects to Work
Network Card = Connects to Work
Interestingly, if I disable my data connection and enable WiFi I CAN send/receive mail over the WiFi connection, so it seems like the data connection is being used in preference to the WiFi one.
Is this a known issue or am I doing something wrong?!
Thanks,
Mike
What´s the version of your ROM?
Is the device labeld by Vodafone?
There is an option when setting up the email account in pocket outlook to select the preferred connection for the account. It is in one of the advanced options pages when setting up the account. Normally it is setup for THE INTERNET so your WiFi adapter should point to the same.
Now, I use a little Mortscript to switch-on the WiFi and immediately change my Network Selection to NO DATA, which is just an empty setting (no internet connection). This effectively shutdowns the GPRS / 3G connection and pocket outlook has to use the WiFi route.
I have an issue with a Sprint TP2 with WIFI. I'm able to connect the router but not able to access the internet. If I connect my phone to the laptop I can use the internet if I change the (Connections:connections: network management) from Sprint to My Work Network but I'm not able to connect via WIFI. I have (Connections: wifi:configure network adapters) to WORK or THE INTERNET for Broadcom 802.11 DHD Network Adapter but it doesn't help. Under Connections: tasks:MY WORK NETWORK:Set up my proxy server I check the box next to THIS NETWORK CONNECTS TO THE INTERNET but it won't stay checked. The profile for the router has been deleted and recreated with no success. I've tried other WIFI routers with no success. My touch pro has no issues. BTW: I'm using version WM6.5.
Am I completely missing something here? Why can I not get my watch on our wifi network. It requires authentication. But if I make sure that bluetooth is enabled. It scans the network and I can see it. However if I try to connect it tells me authentication errors. But I can not find a single spot to add login or password or any authentication option. Only options to connect to wifi are AKA and SIM.. How the heck do I get this thing on a wifi network??
Try disconnecting from Bluetooth and allow your phone to locate your wireless network. You should now be prompted for SSID and password. I personally had a hard time entering a complex password as part of WPA2 requirements. So I enabled WPS on my router and used it to connect my S2 fairly quickly. Furthermore, I don't believe it will use Wifi as long as you are connected to the phone via bluetooth. It can switch to wifi if you are out of the range of bluetooth or choose to use the watch in standalone mode.
Sync your saved wifi information from your Samsung account to your watch. It will log into the wifi network. I had the same problem and after syncing with my phone's saved wifi info it says it's logged in but it will not transfer any data on that wifi network.
Works fine on my home network that only requires a password, but I want it to work everywhere I can connect to wifi with my phone.
Haven't found a solution yet.
Hi experts. I have an Android 6.0 phone with Mediatek processor (MT6580).
Because I don't have money to hire an internet service, I am forced to use my neighbor's WI-FI.
But there is a problem, and that is that WI-FI is used by an average of 8 devices during the day.
And sometimes, some of those devices make intensive use of the internet connection. causing the WI-FI router to saturate.
When this happens, it seems that the WI-FI router starts transmitting the WI-FI signal intermittently.
Then my phone starts to connect and disconnect from the Wi-Fi network automatically (approximately every 3 seconds).
Because of this, the apps that make use of the internet connection, immediately detect the change in the connection, and this represents a big problem for me.
My neighbor's WI-FI router: "TP-LINK WR720N". with security WPA PSK / CCMP / WPS disabled.
I do not have access to the settings of said router, so I cannot change its settings.
My phone is not rooted, but nevertheless I can access the EngineerMode, in which there are options that allow changing parameters related to the WI-FI connection, but I don't understand anything.
My thought is that through the EngineerMode, I can do something to solve the problem mentioned above.
What is your opinion?
Greetings from Venezuela.
I have an RV that allows me to control everything their their app as long as I am connected to the RV's local WIFI network (which doesn't provide internet).
It is obviously a terrible design as I cannot access the internet if I want to stay connected to it.
I know that about the "Switch to mobile data" option, but this doesn't work as this disconnects me from that WIFI connection. So that means I actually have to put the connection as a "Network exception" if I want it to stay connected.
Is there any work around to stay connected to a WIFI connection, but use mobile data when on that connection?
(Samsung note 10+ Android 12)
Always thought
a carrier's cellular network ( a radio network distributed over land ) is used when sending / receiving mobile data,
an internet service provider's network ( accessable via router / access point ) is used when sending / receiving data to / from internet.
All Android apps have a default network. The system decides which should be the default network.
It depends on app's configuration what connections - if available - are to be used - even simultaneously.