Related
Guys I REALLY NEED your HELP.
Here's What I did..
1. Installed CWM on my NOKIA X
2.Got into Recovery mode(It's Cool actually)
3.Thought of installing minirom kitkat on it..(I had already copied it to my removable sd card.)
4.Went through all the menus,,, did nothing,,, and somewhere I saw advanced,, got into it (I didn't know what I was thinking) I cleared every option that it had including cache, memory,sd card, emmc and also some boot related stuff..
5.All of a sudden I couldn't move the options so I just removed the battery and tried to power it on....(**** Happens)-Phone is not powering on.... no boot no light just A DEAD PHONE.
plz gus I Really NEED HELP. How Can I Solve this Problem.........................................................................................Plz plz plz plz.......:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
I think this is hard brick.(very hard to fix) are you able to open factory mod now? if no then wait for developers to help you to fix hard brick. or if your device showing on pc then you can flash stock rom...
•axe• said:
I think this is hard brick.(very hard to fix) are you able to open factory mod now? if no then wait for developers to help you to fix hard brick. or if your device showing on pc then you can flash stock rom...
Click to expand...
Click to collapse
no my phone's not powering up and i'm not able to open factory mode....... Plz help
Aztile said:
no my phone's not powering up and i'm not able to open factory mode....... Plz help
Click to expand...
Click to collapse
download and open ADB driver installer
is your device showing here? or download and open adb shell and type adb devices
is your device listed here?
if yes then download stock rom for nokia x
and flash is with any flash tool (like odin)
(make sure you have installed your phone to the same pc before means you have drivers)
if your device not showing then contact nokia care (dont tell them your story otherwise your warrenty will over tell them only that your mobile is not turning on )
•axe• said:
download and open ADB driver installer
is your device showing here? or download and open adb shell and type adb devices
is your device listed here?
if yes then download stock rom for nokia x
and flash is with any flash tool (like odin)
(make sure you have installed your phone to the same pc before means you have drivers)
if your device not showing then contact nokia care (dont tell them your story otherwise your warrenty will over tell them only that your mobile is not turning on )
Click to expand...
Click to collapse
Sorry buddy...... Tried it... but no use
All we can do is to refer you to a service center. Sorry.
Moderators, please verify my account. I am sick of the five-minute post wait.
Sent from my XT1022 using the XDA Premium 4 app.
Try this..power the phone off, wait 5 mins, then press and hold power for 60 seconds, and check if you see any signs of the phone coming back to life. If not, then the next option is the service center
that too is not working.................Is there no one inthis whole XDA Universe who can help me..... come on guys there must be someone................:crying::crying::crying:
tech_master said:
Moderators, please verify my account. I am sick of the five-minute post wait.
Click to expand...
Click to collapse
The five-minute post limit is lifted once you have reached 10 posts. The moderators have nothing to do with it, as the process is automated to lift the wait after you post 10 times.
The reason for this wait is to keep new users from rapidly posting uselessly just to achieve 10 posts.
Dude This is crazy
thenookieforlife3 said:
The five-minute post limit is lifted once you have reached 10 posts. The moderators have nothing to do with it, as the process is automated to lift the wait after you post 10 times.
The reason for this wait is to keep new users from rapidly posting uselessly just to achieve 10 posts.
May I have a post thank for helping?
Click to expand...
Click to collapse
Dude this is really crazy....... I thought it was someone trying to help me there and now this............................................ AAAhhhhhhh:crying::crying::crying:
Aztile said:
Dude this is really crazy....... I thought it was someone trying to help me there and now this............................................ AAAhhhhhhh:crying::crying::crying:
Click to expand...
Click to collapse
Oops, sorry to get your hopes up.
I do actually have a few things to say about the real problem here:
1. Are you sure that your device is charged up? If not, make sure to plug it in to charge.
2. If charging isn't the problem, I'm going to give it a safe bet that your device is bricked. Like, turned into nothing more than a brick. (That's what "bricked" actually means ) If the device doesn't respond to the power button (which your posts have led me to believe), then there is no way to revive your device.
aah come on
thenookieforlife3 said:
Oops, sorry to get your hopes up.
I do actually have a few things to say about the real problem here:
1. Are you sure that your device is charged up? If not, make sure to plug it in to charge.
2. If charging isn't the problem, I'm going to give it a safe bet that your device is bricked. Like, turned into nothing more than a brick. (That's what "bricked" actually means ) If the device doesn't respond to the power button (which your posts have led me to believe), then there is no way to revive your device.
Post thank for the real answer?
Click to expand...
Click to collapse
Jesus!!!! Did you just say "NO WAY" come on buddy don't do this to me..................................................... It's like i'm half dead...... there must be some way to unbrick it.........................Come on PLZ plz plz:crying::crying::crying::crying::crying::crying::crying:
aah come on
thenookieforlife3 said:
Oops, sorry to get your hopes up.
I do actually have a few things to say about the real problem here:
1. Are you sure that your device is charged up? If not, make sure to plug it in to charge.
2. If charging isn't the problem, I'm going to give it a safe bet that your device is bricked. Like, turned into nothing more than a brick. (That's what "bricked" actually means ) If the device doesn't respond to the power button (which your posts have led me to believe), then there is no way to revive your device.
Post thank for the real answer?
Click to expand...
Click to collapse
Jesus!!!! Did you just say "NO WAY" come on buddy don't do this to me..................................................... It's like i'm half dead...... there must be some way to unbrick it.........................Come on PLZ plz plz:crying::crying::crying::crying::crying::crying::crying:
Aztile said:
Jesus!!!! Did you just say "NO WAY" come on buddy don't do this to me..................................................... It's like i'm half dead...... there must be some way to unbrick it.........................Come on PLZ plz plz:crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
You said you've cleared eMMC and also some boot related stuff.
Well, messing with your eMMC and boot partition isn't a good idea, if you wiped your entire eMMC partition it means you've also wiped bootloader stuff...
I'm sorry but looks like your phone is totally bricked....
First of all stop shouting...!
Are you sure you choose "advaneced menu" and not "mount and storage" ....?
Also me too I think your device is bricked...
If you can't recognise it from fastboot and adb and you can boot to bootloader and recovery mode it is bricked...
root-expert said:
First of all stop shouting...!
Are you sure you choose "advaneced menu" and not "mount and storage" ....?
Also me too I think your device is bricked...
If you can't recognise it from fastboot and adb and you can boot to bootloader and recovery mode it is bricked...
Click to expand...
Click to collapse
Ooops Sorry.....
Ok I understood..... IT'S BRICKED..........
Well then how to unbrick it
Aztile said:
Ooops Sorry.....
Ok I understood..... IT'S BRICKED..........
Well then how to unbrick it
Click to expand...
Click to collapse
If your phone won't turn on at all, it's totally bricked. Only a motherboard replacement will fix it...
As you know your phone has hard bricked buddy
then you should also know you cant fix it
try odin and flash bootloader (if u can without open download mode)
or Nokia care is the best way...
Nothing new about , MBM 5.0 ? , Image Factory ? sorry one more topic
ST4NL3//Y said:
Nothing new about , MBM 5.0 ? , Image Factory ? sorry one more topic
Click to expand...
Click to collapse
till now is no news about that, how? when? where? what? i dont know
ST4NL3//Y said:
Nothing new about , MBM 5.0 ? , Image Factory ? sorry one more topic
Click to expand...
Click to collapse
i'm waiting too :crying:
maybe other solution?(
can someone smart can help us?
Can pay someone?
MadL1fe said:
i'm waiting too :crying:
maybe other solution?(
can someone smart can help us?
Can pay someone?
Click to expand...
Click to collapse
bring your phone to services center, your problem will solved but you must pay it
I already tried everything, but it looks like we will have to wait even. there is no any news about a tool I'm sad without my moto G
Sandivisi said:
bring your phone to services center, your problem will solved but you must pay it
Click to expand...
Click to collapse
in my country no motorola service centers
many of us have lost the guarantee of motorola
ST4NL3//Y said:
many of us have lost the guarantee of motorola
Click to expand...
Click to collapse
I will pay what I can, if someone will help restore .Here is a lot of clever people ... that no one can help?
You say hardbricked, you mean the phone doesnt boot right?
If you connect to pc, installs an driver named HSusb for qualcomm s1 emergency boot?
Normal it must do that.If not, press vol keys and put usb in.
Normaly you cant brick qualcomm emergency mode. If you get this driver installed, write me a pn. i can flash it back to normal recovery.
konsolen said:
You say hardbricked, you mean the phone doesnt boot right?
If you connect to pc, installs an driver named HSusb for qualcomm s1 emergency boot?
Normal it must do that.If not, press vol keys and put usb in.
Normaly you cant brick qualcomm emergency mode. If you get this driver installed, write me a pn. i can flash it back to normal recovery.
Click to expand...
Click to collapse
no man, the phone doesnt boot into fastboot
and we need blankflash/mbm-ci for new bootloader lollipop to make it work
correct need of blankflash compatible with 5.0
i dont need fastboot.
i upload with a serial line in raw format.
konsolen said:
i dont need fastboot.
i upload with a serial line in raw format.
Click to expand...
Click to collapse
how?
my phone dead after downgrade to 4.4.3 then upgrade to 4.4.4 from android 5.0
Sandivisi said:
how?
my phone dead after downgrade to 4.4.3 then upgrade to 4.4.4 from android 5.0
Click to expand...
Click to collapse
me was exactly the same
Then go to the store.
i will give you my help and you want inform me about updates.
i read that, but you shredder your masterboot register in nandflash.
there is no android. this is the lowest level of a device. name it layer 0.
you crashed the register where the cpu looks what he must do, to start the first sequence.
konsolen said:
You say hardbricked, you mean the phone doesnt boot right?
If you connect to pc, installs an driver named HSusb for qualcomm s1 emergency boot?
Normal it must do that.If not, press vol keys and put usb in.
Normaly you cant brick qualcomm emergency mode. If you get this driver installed, write me a pn. i can flash it back to normal recovery.
Click to expand...
Click to collapse
come on, help us
---------- Post added at 10:54 PM ---------- Previous post was at 10:47 PM ----------
konsolen said:
Then go to the store.
i will give you my help and you want inform me about updates.
i read that, but you shredder your masterboot register in nandflash.
there is no android. this is the lowest level of a device. name it layer 0.
you crashed the register where the cpu looks what he must do, to start the first sequence.
Click to expand...
Click to collapse
i dont understand what you mean, so what should I do
ok.the qualcomm driver is installed right?
then load the teamviewer.exe app.
i look for the right snapdragon 400 mbr and connect then to your pc.
konsolen said:
ok.the qualcomm driver is installed right?
then load the teamviewer.exe app.
i look for the right snapdragon 400 mbr and connect then to your pc.
Click to expand...
Click to collapse
yes, it already installed
and for what teamviewer?
i must connect to flash.
same problem with me .I flashed stock rom to downgrade to 4.4.3 from rooted stock lollipop OS because of messing up build.prop file.After that,I have installed OTA update to 4.4.4,then the problem starts no bootloader,no boot,no fastboot,no adb,no recovery and except qhsusb_bulk when connected to PC.After 2 days ,its now showing sometimes as usb input device ,with LED light blinking.Not sure if there is solutuion for this.pls help if anyone found the solution
I have a problem with my nexus 5, I try to install the recovery and it stays black screen does not enter the bootloader or anything, my pc recognizes it as android adb interface some help.
me to having same problem dont know what to do
pc not recognising my device
Follow this thread: https://forum.xda-developers.com/go...-unbrick-nexus-5-stucked-qualcomm-hs-t3043301
I hope you have an efs backup somewhere if you don't keep trying..
also how did you try to install recovery? there is a multitude of ways and knowing what you did could help a lot.
Jo_Jo_2000 said:
Follow this thread: https://forum.xda-developers.com/go...-unbrick-nexus-5-stucked-qualcomm-hs-t3043301
I hope you have an efs backup somewhere if you don't keep trying..
also how did you try to install recovery? there is a multitude of ways and knowing what you did could help a lot.
Click to expand...
Click to collapse
Hello thanks for your help I will try, I did the procedure with the tool nexus root toolkit I followed the steps my phone stayed so now it vibrates and reboots constantly my pc only recognizes it as mtp usb or android device.
soujirock said:
Hello thanks for your help I will try, I did the procedure with the tool nexus root toolkit I followed the steps my phone stayed so now it vibrates and reboots constantly my pc only recognizes it as mtp usb or android device.
Click to expand...
Click to collapse
Follow the thread and stop using toolkits since they might do obscure things and people cannot help you if you just say "i did it with the toolkit"
Jo_Jo_2000 said:
Follow the thread and stop using toolkits since they might do obscure things and people cannot help you if you just say "i did it with the toolkit"
Click to expand...
Click to collapse
Hello try to perform the steps but in the device manager I do not get any of that I only recognize the phone as android device.
soujirock said:
Hello try to perform the steps but in the device manager I do not get any of that I only recognize the phone as android device.
Click to expand...
Click to collapse
Thanks for your help, download one that said repair nexus 5 dead and now I get this I think I should do something more because now the pc recognizes me so if you could guide me I would thank you very much.
what happens when you try to open the mtp device?
if not try uninstalling all drivers with google..
you should always be able to reach the dload mode even if it's fully working as long as you follow the steps.
Jo_Jo_2000 said:
what happens when you try to open the mtp device?
if not try uninstalling all drivers with google..
you should always be able to reach the dload mode even if it's fully working as long as you follow the steps.
Click to expand...
Click to collapse
Hello what happens if it opens like a usb but on the screen of my cell you can not see anything even I recognize it in fastboot mode but on the screen I see nothing.
How can i get into dload mode
I try to flash it with the method you gave me but I get a message from device was not found in dload mode trying flash programmer.
maybe your screen is just broken?
also citing the thread linked: "If you dont see Qualcomm HS-USB QDLoader 9008 click on the CLICK TO SHOW CONTENT button bellow, otherwise don't and follow the guide."
Jo_Jo_2000 said:
maybe your screen is just broken?
also citing the thread linked: "If you dont see Qualcomm HS-USB QDLoader 9008 click on the CLICK TO SHOW CONTENT button bellow, otherwise don't and follow the guide."
Click to expand...
Click to collapse
Hello my screen is not broken or anything I already recognized the pc driver qualcom 9008 and perform the procedure of the post now my cell recognizes the pc as nexus 5 in usb mode but I do not have the system.
soujirock said:
but I do not have the system.
Click to expand...
Click to collapse
Aka no reaction or no fastboot or a missing partition?
is recovery working?
is bootloader working?
what has appeared on your screen to show you that it isnt broken?
Jo_Jo_2000 said:
Aka no reaction or no fastboot or a missing partition?
is recovery working?
is bootloader working?
what has appeared on your screen to show you that it isnt broken?
Click to expand...
Click to collapse
Hello, it seems that the fastboot mode works because in the pc it recognizes me as android device and I download a program that is called dead nexus 5.bat and this recognizes me and writes the system and performs other operations more but still nothing appears I do not know if the system can be flashed by this method.
i try with this method https://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701 but nothing
can you execute fastboot commands?
what does that script tell you, where is it from?
Please stop using toolkits, they perform obscure unpredictable things.
Also what makes you so certain your screen isn't broken given that everything works except the screen?
Jo_Jo_2000 said:
can you execute fastboot commands?
what does that script tell you, where is it from?
Please stop using toolkits, they perform obscure unpredictable things.
Also what makes you so certain your screen isn't broken given that everything works except the screen?
Click to expand...
Click to collapse
thanks man i solved my problem
Good day everyone.
I have a Moto G7 Power Ocean blue that got bricked while trying to preform an update. I may have accidentally used a wrong firmware and the phone is totally dead, it doesn't turn on at all. However when I plug the phone to my laptop using USB cable, I hear a connection sound (Chim) from the laptop but there is no drive icon on my computer nor any visual notification that my phone is connected to the laptop.
I have also download the blank flash file from one of the threads on this platform and after an hour there was an error. And nothing happened.
Lastly, I've attampted to rescuing the phone using the LMSA tool from Lenovo and that wasn't successful either. So if anyone is out there who can help, I really appreciate it. Thanks in advance
Solo-Play said:
Good day everyone.
I have a Moto G7 Power Ocean blue that got bricked while trying to preform an update. I may have accidentally used a wrong firmware and the phone is totally dead, it doesn't turn on at all. However when I plug the phone to my laptop using USB cable, I hear a connection sound (Chim) from the laptop but there is no drive icon on my computer nor any visual notification that my phone is connected to the laptop.
I have also download the blank flash file from one of the threads on this platform and after an hour there was an error. And nothing happened.
Lastly, I've attampted to rescuing the phone using the LMSA tool from Lenovo and that wasn't successful either. So if anyone is out there who can help, I really appreciate it. Thanks in advance
Click to expand...
Click to collapse
If you have an identical phone, just clone the partition and image over to the dead phone.
Enjoy the club
Sent from my LG-LS997 using Tapatalk
Unfortunately. I don't have that. I was wondering if there were a step by step tutorial or tool to use to get started with the process.
Solo-Play said:
Unfortunately. I don't have that. I was wondering if there were a step by step tutorial or tool to use to get started with the process.
Click to expand...
Click to collapse
There are many thread how to restore image.
Or just simple to run firehose programmer (download and flash the blankflash) to able restore fastboot first
Sent from my moto g(7) power using Tapatalk
Do you have a link or a website by any chance!
Solo-Play said:
Do you have a link or a website by any chance!
Click to expand...
Click to collapse
Go y telagram for the g7 power there is alot of info there that might help u out good luck
Hello again,
y telagram،, is that a website! I googled it and there was nothing.
Solo-Play said:
Hello again,
y telagram،, is that a website! I googled it and there was nothing.
Click to expand...
Click to collapse
Google Moto g7 power telagram should come up with it.
Solo-Play said:
Hello again,
y telagram،, is that a website! I googled it and there was nothing.
Click to expand...
Click to collapse
It's another walled garden that requires a phone # to register for, you know, "security". And profit!
Include "MotoG7Brasil" or "mG7Power" in the query.
Or, search around here or lolinet to find the correct Blankflash zip.
googleverifysux said:
It's another walled garden that requires a phone # to register for, you know, "security". And profit!
Include "MotoG7Brasil" or "mG7Power" in the query.
Or, search around here or lolinet to find the correct Blankflash zip.
Click to expand...
Click to collapse
Get an wifi number or get an free TextNow num and sign up with that
Hey guys. I need some help. this is my wrong doing !!
I got a network unlocked T mobile which I started using with AT&T. Today I received the unlock code from T mobile to unlock bootloader which I did. then I I installed TWRP and Magisk without any issues. then I tried to fix the persis.img coz fingerpritn is not working. it didnt work so I left it alone. But I dont know why I wiped cache, data and then phone got stuck at boot loop. (no backup). I tried to install using MSM tool but it didnt work. MSM tool was not detecting the phone. then in TWRP I clicked on EDL and now the phone screen is blank. tried every possible combination of keys but no luck. was doing all this on windows 10. any help would be greatly appreciated. thanks
kool_am said:
Hey guys. I need some help. this is my wrong doing !!
I got a network unlocked T mobile which I started using with AT&T. Today I received the unlock code from T mobile to unlock bootloader which I did. then I I installed TWRP and Magisk without any issues. then I tried to fix the persis.img coz fingerpritn is not working. it didnt work so I left it alone. But I dont know why I wiped cache, data and then phone got stuck at boot loop. (no backup). I tried to install using MSM tool but it didnt work. MSM tool was not detecting the phone. then in TWRP I clicked on EDL and now the phone screen is blank. tried every possible combination of keys but no luck. was doing all this on windows 10. any help would be greatly appreciated. thanks
Click to expand...
Click to collapse
So it turns out its not a hard brick. I'm stuck on TWRP. I'm able to get to fastboot. I tried to install Oxygen OS thru fastboot but the PC is not detecting the phone in fastboot. Mac detects it but I believe all the stock Roms are for PC use. I did try it on my MAc and was able to open a terminal window inside the Oxygen OS folder but then the fastboot device command is not found. any help would be greatly appreciated. I installed SDK and ADB drivers on PC but in device manager the device still only shows as Android device with no drivers. !! thanks
kool_am said:
So it turns out its not a hard brick. I'm stuck on TWRP. I'm able to get to fastboot. I tried to install Oxygen OS thru fastboot but the PC is not detecting the phone in fastboot. Mac detects it but I believe all the stock Roms are for PC use. I did try it on my MAc and was able to open a terminal window inside the Oxygen OS folder but then the fastboot device command is not found. any help would be greatly appreciated. I installed SDK and ADB drivers on PC but in device manager the device still only shows as Android device with no drivers. !! thanks
Click to expand...
Click to collapse
Solved !
solved how? i greatly would like to know how to flash from fastboot, i know that isnt what this thread was about but im having the exact same problems you are with msm. i can see the phone in fastboot but i have no idea how to flash or what to flash from there. I can get into recovery but i cant copy anything over to the phone and the drivers dont show up for adb. so i pretty much ONLY have fastboot and dont know what to do! 2 days since the phone been down and im lost AF
JCroffut said:
solved how? i greatly would like to know how to flash from fastboot, i know that isnt what this thread was about but im having the exact same problems you are with msm. i can see the phone in fastboot but i have no idea how to flash or what to flash from there. I can get into recovery but i cant copy anything over to the phone and the drivers dont show up for adb. so i pretty much ONLY have fastboot and dont know what to do! 2 days since the phone been down and im lost AF
Click to expand...
Click to collapse
Can msm detect the phone when connected in fastboot. Also check device manager in pc to make sure it detects the phone as qualcomm device. Otherwise msm will not work.
Download msm. Turn phone off. Connect phone to pc. Open msm. Press start. Press volume down and power button on phone. It should be detected by msm and should start flashing the software.
Standby....
When plugged in the phone in EDL it shows
QUSB_BULK_CID0412 with an exclamation mark inside a yellow triangle
When i plugged in the phone and open fastboot it shows
Android with an exclamation point inside a yellow triangle
I booted up msm, clicked other, clicked start, pressed volume down and volume up and plugged it in. still says waiting for device to connect. ive also tried this with a number of keys being help, ive tried to boot from twrp straight into edl mode, none of which works
which all says to me its a driver issue of some kind, but for 3 days ive been slaving away on xda and cannot for the life of me figure out where to get the drivers.
JCroffut said:
Standby....
When plugged in the phone in EDL it shows
QUSB_BULK_CID0412 with an exclamation mark inside a yellow triangle
When i plugged in the phone and open fastboot it shows
Android with an exclamation point inside a yellow triangle
I booted up msm, clicked other, clicked start, pressed volume down and volume up and plugged it in. still says waiting for device to connect. ive also tried this with a number of keys being help, ive tried to boot from twrp straight into edl mode, none of which works
which all says to me its a driver issue of some kind, but for 3 days ive been slaving away on xda and cannot for the life of me figure out where to get the drivers.
Click to expand...
Click to collapse
It is a driver issue for sure. When connected device manager should detect as qualcomm hd9008.......
kool_am said:
It is a driver issue for sure. When connected device manager should detect as qualcomm hd9008.......
Click to expand...
Click to collapse
i figured that, i am at a complete loss as to where to find the drivers. i actually might need you to hold my hand on this one a tiny bit because im about to smash the phone on the ground and say someone stole it. thats where i am with this phone haha
JCroffut said:
i figured that, i am at a complete loss as to where to find the drivers. i actually might need you to hold my hand on this one a tiny bit because im about to smash the phone on the ground and say someone stole it. thats where i am with this phone haha
Click to expand...
Click to collapse
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
kool_am said:
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
Click to expand...
Click to collapse
standby ill read through it now. we also have 2 different threads going so i can combine them if thats easier for you
kool_am said:
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
Click to expand...
Click to collapse
Only download the qualcomm driver from this link. Or search for it online.
I have spent much more time than you trying to figure this out. I have a pc and Mac both. Mac is not compatible with a lot of the software and my pc usb ports are all bad. Point being, leave it alone for a day or so. Come back at it with a fresh start and fresh mind.
kool_am said:
Only download the qualcomm driver from this link. Or search for it online.
I have spent much more time than you trying to figure this out. I have a pc and Mac both. Mac is not compatible with a lot of the software and my pc usb ports are all bad. Point being, leave it alone for a day or so. Come back at it with a fresh start and fresh mind.
Click to expand...
Click to collapse
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
JCroffut said:
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
Click to expand...
Click to collapse
If I were you, I wouldn't throw the phone away. Like I said it's a simple issue of driver. Install the correct driver and make sure you see it as qualcomm device in device manager. Trust me, from then on, it's just a matter of a few clicks.
I unbricked my phone to t mobile and then converted to global rom without any issues.
kool_am said:
If I were you, I wouldn't throw the phone away. Like I said it's a simple issue of driver. Install the correct driver and make sure you see it as qualcomm device in device manager. Trust me, from then on, it's just a matter of a few clicks.
I unbricked my phone to t mobile and then converted to global rom without any issues.
Click to expand...
Click to collapse
i sent you a private convo on here if thats ok so i dont spam the forum! You may be able to help me out if i could borrow a few minutes of your time!
JCroffut said:
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
Click to expand...
Click to collapse
i was definatly kidding tho this is my only phone and i have to solve this problem lol
I'm not sure if you have read this thread already. I messed up my phone a couple days ago as well and follow the steps there and was able to MSM my phone back to stock.
[OP8][OOS TMO 55CB] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com