{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Back again!
You may remember me from my SkyDragon roms/kernels and HolyDragon kernels for OP7/OP6/6T/OP3/N6/M8/M7/G3 among other devices. This is the latest sdmmagpie kernel+audio source from Google. No plans for any overclocking cpu/gpu that slowly kill your phone. No plans to upstream anything as most of the time there's either no benefit at all or it performs worse than stock. (If it was worth it, Google would have done so already). My only goal, as always, is to get the best performance *and* battery life out of our phone as possible. Kernel zip uses Anykernel3 by Osm0sis to install so no fear of losing root or ramdisk changes or anything.
~*~*Information*~*~
Flashable Kernel zip supports only bootloader unlocked Pixel 4a's[/B]
Kernel source is based on official Google Source Code to ensure best performance
No user setup required - Optimal settings already applied
Compiled with Google Clang 11.0.1(r383902)
~*~*Features*~*~
Untainted Kernel Configured for Performance
- Extra Debugging Disabled
KCAL Support
Boeffla Wakelock Blocker Built-in
Latest WireGuard Built-In
Touchboost Toggle Enabled
- No user clock-speed modifications
Most TCP Profiles Enabled
- BBR TCP Congestion Profile set as default
TCP Fast Open Enabled
Power Efficient Workqueue Toggle Enabled
- Added extra driver support (qcacld/sde/vmstat)
Additional IO Schedulers (FIOPS/Maple/SIO/Zen)
- Maple IO set as default
Exfat Support
NTFS RW Support
Lowered some Sched and Devfreq latencies
Multiple compiler fixes and updates
All external/internal modules are in-lined
No module load hacks or vendor mods
Direct HBM Mode Toggle Added
TWRP Support(LZMA/LZ4 Ramdisk)
~*~*Credits and Thanks*~*~
xanaxdroid
SultanXDA/KernelToast
RandomBlame/Kelsirae
Pafcholini
MLucy
Flar2
MyFluxi
DespairFactor
FranciscoFranco
KDrag0n
Osm0sis
Mauronofrio
Joshuos
dabug123
~*~*Downloads*~*~
To Install :
Make sure bootloader is unlocked
Download boot.img and dtbo.img
Reboot to fastboot
Fastboot flash boot hdk-rv10.3.0_boot_sunfish-rq3a.210905.001.img
Fastboot flash dtbo hdk-rv10.3.0_dtbo_sunfish-rq3a.210905.001.img
Fastboot reboot
?????
Profit
~~~~~~~~~~~~~~~
Alternative:
Download the flashable kernel zip
Flash with EXKM or FKM app or Custom Recovery(LOS/TWRP)
Reboot
??????
Profit
note: anykernel.sh inside zip will need edited to flash on Floral
For Pixel 4a on Android 11 - STABLE
HDK_Sunfish-11_R.V.10.3
Flashable Zip w/dtbo.img included
Fastboot Version:
HDK Repacked Boot Image for sunfish-rq3a.210905.001 - September 2021
HDK DTBO Image for sunfish-rq3a.210905.001 - September 2021
Note: This kernel isn't actively being worked on..
For Pixel 4a on Android 10 - STABLE
HDK_Sunfish-10_R.V.1.1
Flashable Zip
AFH
GDrive
~~~~~~~~~~~~~~~~~~~~~~~~
You can find changes(changelog) by looking at my posted source
Any bug reports require logcats/dmesg, thanks!
If you need in-depth assistance that can't easily be handled here, or you want to help with development, please check my TG Group
~*~*Donations*~*~
If you want to donate to my coffee fund, I prefer any cryptocurrency over paypal but either is fine.
Donate with Coinpayments
or just use paypal, thanks!
XDA:DevDB Information
[KERNEL][SUNFISH][02 NOV] HolyDragon Kernel [10/STABLE][11/STABLE], Kernel for the Google Pixel 4a
Contributors
HolyAngel
Source Code: https://gitlab.com/HolyAngel/sunfish
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2020-08-31
Created 2020-08-28
Last Updated 2020-11-03
Reserved
Reserved
Alright all, I just need some testers to flash with me and verify we're all good. As far as I can tell, everything works fine. Audio/wifi/bt/gps/etc. all work fine. Just need more people than myself to verify stability and such and we'll move from D.V.(Development Version) to R.V.(Release Version) kernel.
After that I'll work on additional fixes, tweaks, and features. Thanks and please report any findings here :good:
Good to see you and HD around again. It's been since 6T Pie for me. Got my sunfish and already in the lab with some bringups as well. Let's connect and I'll run this and share my other findings as well. (Sidenote: Just scored a 9713 PC Mark first run on stockish 200805.003 , Fajita was barely capable of pulling that consistently)
I Volunteer! Nice to see experimentation. Feedback if and when you need
Thank you
HolyAngel said:
Alright all, I just need some testers to flash with me and verify we're all good. As far as I can tell, everything works fine. Audio/wifi/bt/gps/etc. all work fine. Just need more people than myself to verify stability and such and we'll move from D.V.(Development Version) to R.V.(Release Version) kernel.
After that I'll work on additional fixes, tweaks, and features. Thanks and please report any findings here :good:
Click to expand...
Click to collapse
Of course this can go without saying but does not boot on Android 11 beta.... I know, just wanted to try, guess I'll flash A10 firmware so I can run this kernel.
Cj719 said:
Of course this can go without saying but does not boot on Android 11 beta.... I know, just wanted to try, guess I'll flash A10 firmware so I can run this kernel.
Click to expand...
Click to collapse
Yes, no beta support. I'll have an 11 kernel when 11 releases. Should be like two weeks or so.
Alright everyone, kernel is just about done and ready for full release. Just want a few more people to verify this one for me.
Far as I can tell we've been 100% stable with zero issues this entire time anyways.
For the R.P.1.1 I've fixed most all the issues in the kernel, set it to performance with full LTO enabled, and have added the usual features and fixes I do on most all my kernels. This runs totally different than the D.V.1.0 release so if you tried that and were disappointed, try this one and see what you think. Will give it a day or two and if all good like I suspect, we'll go to full on Stable release.
HolyAngel said:
Alright everyone, kernel is just about done and ready for full release. Just want a few more people to verify this one for me.
Far as I can tell we've been 100% stable with zero issues this entire time anyways.
For the R.P.1.1 I've fixed most all the issues in the kernel, set it to performance with full LTO enabled, and have added the usual features and fixes I do on most all my kernels. This runs totally different than the D.V.1.0 release so if you tried that and were disappointed, try this one and see what you think. Will give it a day or two and if all good like I suspect, we'll go to full on Stable release.
Click to expand...
Click to collapse
Iv'e been using it (DV1.0) since you posted. No issues at all.
Been using R.P.1.1, love it and running great, Thank You
Alright, I think we're good enough for a full on release here. Everything works and works well. No issues or errors reported. Enjoy and let me know if you come across anything, thanks!
I'm loving KCAL support!
As a photographer I love being able to tweak my screen colors to be just right.
I flashed this through Franco's kernel app, it couldn't have been any easier.
Thanks!
HolyAngel said:
Alright, I think we're good enough for a full on release here. Everything works and works well. No issues or errors reported. Enjoy and let me know if you come across anything, thanks!
Click to expand...
Click to collapse
I'm thinking of trying this. Will it stop google from spying on me?
tribecca said:
I'm thinking of trying this. Will it stop google from spying on me?
Click to expand...
Click to collapse
What? No, a kernel doesnt do that.
12paq said:
I'm loving KCAL support!
As a photographer I love being able to tweak my screen colors to be just right.
I flashed this through Franco's kernel app, it couldn't have been any easier.
Thanks!
Click to expand...
Click to collapse
Appreciative.
Could you share your kcal settings.
Thank you
HolyAngel said:
What? No, a kernel doesnt do that.
Click to expand...
Click to collapse
Sorry, stupid question
mustbevick said:
Appreciative.
Could you share your kcal settings.
Thank you
Click to expand...
Click to collapse
Happy to help.
For the P4a I only adjusted RGB and Saturation values. Out of the box the screen was a bit too warm for me. This is not a perfect Pantone color calibration, which is often quite flat. This is just what I like for average viewing accuracy. Ymmv, as it seems Pixel phones are not all the same.
I wasn't sure what kernel app you use, since my adjustments were simple, I'll just share a screenshot.
12paq said:
Happy to help.
For the P4a I only adjusted RGB and Saturation values. Out of the box the screen was a bit too warm for me. This is not a perfect Pantone color calibration, which is often quite flat. This is just what I like for average viewing accuracy. Ymmv, as it seems Pixel phones are not all the same.
I wasn't sure what kernel app you use, since my adjustments were simple, I'll just share a screenshot.
Click to expand...
Click to collapse
Thank you! - i am using EXKM / is that franco kernel manager ?
mustbevick said:
Thank you! - i am using EXKM / is that franco kernel manager ?
Click to expand...
Click to collapse
Yes.
And of course since I went and checked my settings I started manipulating and playing around with it again! Haha
I like these better:
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel features:
Build with custom toolchain blu_naro-7.3 (cortex-a57 targeted, build with latest Crosstool-NG from developer snapshot Linaro GCC 7.3-2018.04)
Full -O2 build with device and target flags enhanced, linaro build improvements, etc
Less is more: stockish OP3/OP3T unified builds based on OnePlusOSS/android_kernel_oneplus_msm8996
Systemless installer (doesn't touch system partition, OTA friendly - Nougat only)
Removed some debug and logging options
ARM enhanced performance and battery patches
CVE security patches, general upstream and CAF fixes
Several CPU Governors (blu_active modded own governor by default - fastlane mode available!)
No OC, set 300HZ base timer frequency
msm_performance input boost toggle on/off (enabled by default), tweaked cpu_boost driver
Enhanced TCP methods (westwood is default), Network and Wifi tweaks and updated drivers
Several I/O control tweaks, added schedulers FIOPS and ZEN v2 is default, tweaked and upstreamed filesystems (F2FS, ExFAT, NTFS & CIFS)
Removed verify and forced encryption, Set androidboot.verifiedbootstate=green
Stock thermal driver by default (custom tunables available for ROMs with no thermal daemon)
Disabled hotplug on low battery levels
Optimized crypto routines
Swap and adaptive LMK off by default, 60 apps on background by default
Vibrator Strength tunable and Gesture Haptic Feedback control (touchpanel)
KGSL fixes and reworked GPU driver (use 133MHz min freq to save juice, goes to idle @ 100MHz)
sRGB and KCAL - Advanced color control for Qualcomm MDSS v2 (RGB calibration and post-processing features)
DASH charge and USB Fast Charge (USB mode up to 900mA with MTP on)
Battery/Notification LED control
FS fsync toggle on/off
Wakelock blockers available
zx2c4's wireguard support
CDROM emulation on mass_storage (compatible with DriveDroid 0.10.36+)
init.d support (put your scripts in /system/su.d or /su.su.d [systemless SuperSU], /magisk/.core/post-fs-data.d [Magisk])
Compatible with Kernel Adiutor and others
DOWNLOAD KERNEL ZIP and RECOVERY (No mirrors please)
Warning: If you come from other kernel or have any issues, you should dirty flash your ROM before flashing blu_spark zip to avoid problems.
Reflash ROM -> if you want root flash SuperSU or Magisk (default, no plugins/modules) -> flash blu_spark.
If you are already rooted or upgrading between blu_spark versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
Builds for OP3/3T are unified (so can be flashed in both devices).
About bugs and troubleshoots: don't bother to post if a log isn't ready or without steps so the behavior can be replicated. I only active support stock OOS with NO mods whatsoever (apart from root). That includes NO support if using xposed, Magisk with modules, etc.
If you're using custom ROMs (including OOS based ones) or Open Betas you're on your own. I'm only interested on debugging stuff in stock and stable OOS.
Save the SOT and battery stats/screenshots for general threads, here we deal with development, not personal tastes and results.
Also don't spam this thread with CM or other ROMs stuff like "this don't work, my app doesn't open, etc" , no OT about OTAs, apps, ROM bugs, Recovery/TWRP troubleshoots and other userspace stuff. There's threads for it, use them.
Going back to stock: This kernel installer doesn't change your filesystem (systemless in case of Nougat). Oreo builds touch system partition.
You can backup your boot & system (Oreo) with TWRP before flashing blu_spark if you want to go back to full stock or just dirty flash your full ROM.
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
XDA:DevDB Information
blu_spark op3-op3t, Kernel for the OnePlus 3
Contributors
eng.stk
Source Code: https://github.com/engstk/op3t
Kernel Special Features: Powered by sparky
Version Information
Status: Stable
Current Stable Version: r217 Oreo unified
Stable Release Date: 2018-07-28
Current Beta Version: r218 Oreo unified
Beta Release Date: 2019-03-26
Created 2016-06-24
Last Updated 2019-11-29
wooo great, your kernel for oneplus x is amazing!!!!
welcome
Great job
Great job!
Whoa was waiting for this one, first experience was on OnePlus X, you made that device fly! Going to try this over the weekend!
Will you add oc?
kenzolo said:
wooo great, your kernel for oneplus x is amazing!!!!
welcome
Click to expand...
Click to collapse
Razertje said:
Whoa was waiting for this one, first experience was on OnePlus X, you made that device fly! Going to try this over the weekend!
Click to expand...
Click to collapse
Great to see you guys here :highfive:
matze19999 said:
Will you add oc?
Click to expand...
Click to collapse
idk, I have more urgent stuff to add yet
works dash charge?
liver20 said:
works dash charge?
Click to expand...
Click to collapse
When OnePlus releases the source for it, sure.
Meanwhile no.
Great! I'll be very happy with this kernel [soon]
Chris.nl said:
Great! I'll be very happy with this kernel [soon]
Click to expand...
Click to collapse
Welcome :highfive:
Nice to see you here @eng.stk
Haven't seen you around since you left the Nexus 6 - always liked your kernels and I bet I'll love it here too!
@eng.stk yes!!!!!you are here!!!!I was in love with your kernel......happy to see you there.......yesss!!!
Bye Dash, Hi blu_sp★rk
liver20 said:
works dash charge?
Click to expand...
Click to collapse
eng.stk said:
When OnePlus releases the source for it, sure.
Meanwhile no.
Click to expand...
Click to collapse
I've used blu_sp★rk since OPX and don't need Dash so... I've got r17 running fine on OxygenOS 3.1.3
wow i've read a lot of good things about your previous kernel. looking forward to trying this out on my recently rooted OP3.
Thanks!!
and as an aside, it's awesome to see how much development is already going for a phone that *just* came out. awesome!!
Would love to try but I need the stock kernel to switch back.
therebel88 said:
wow i've read a lot of good things about your previous kernel. looking forward to trying this out on my recently rooted OP3.
Thanks!!
and as an aside, it's awesome to see how much development is already going for a phone that *just* came out. awesome!!
Click to expand...
Click to collapse
Yeah thing swill take some time, new arch for me, lot's of stuff to deal with.
Chris.nl said:
I've used blu_sp★rk since OPX and don't need Dash so... I've got r17 running fine on OxygenOS 3.1.3
Click to expand...
Click to collapse
I only used DASH once to test it out.
Hope OP releases the source soon, it's OP2 fingerprint sensor bs all over again.
Thanks for the "case" btw
Flamehell said:
@eng.stk yes!!!!!you are here!!!!I was in love with your kernel......happy to see you there.......yesss!!!
Click to expand...
Click to collapse
akselic said:
Nice to see you here @eng.stk
Haven't seen you around since you left the Nexus 6 - always liked your kernels and I bet I'll love it here too!
Click to expand...
Click to collapse
So nice to see some more friendly faces :good:
I've been around developing for other 2 or 3 devices
nevermind, i was reading the OP wrong, it says soon for blu-active gov.
I know it's not supported but for anyone on CM13 I gave it a go. On the A3000 I didn't have WiFi or 3g/4g. Just thought I'd let anyone considering testing it what I found.
thanks for the contribution brother
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1. IO Scheduler- Zen, Deadline, BFQ, CFQ
2. Governers - Schedutil, Helixschedutil, Alucardsched, Darknesssched, BluActive, ElementalX, Darkness, Impulse ...
4. TCP Algorithms - Westwood, Cubic, Reno, Veno, Scalable.
5. F-Sync - Asynchronus & Dynamic
6. SoundControl
7. UberTC 5.3
8. LCD Notifier Driver
9. LCD Backlight Dimmer
10. Dynamic FSync
11. Swap Support
12. Color Control - KCal v2
13. Input Boost, CPU Boost & Touch Boost
14. OTG - NTFS_RW
15. Adreno Idler
16. Arch Power
17. Power Suspend
18. Toggles : CRC,FairSleepers, ArchPower,
19. WakeLock Control
20. OC up to 2.26/2.44 GHz
21. GPU OC 681 MHz
The EAS version is for EAS enabled ROMs only. That means atm RR only!! 06/27 build an newer.
Download 4.03 EAS/OC/UV/OV - Krack proof
Download 4.02 EAS/OC/UV/OV
Download 4.01 EAS/OC/UV/OV
Download 4.01 all ROMs except MIUI EAS/OC/UV/OV
Download 4.0 EAS/OC/UV/OV
Download 4.0 all ROMs except MIUI EAS/OC/UV/OV
Download 3.9.18 EAS/UV/OV
Download 3.9.17 EAS/UV/OV
Download 3.9.15 EAS/UV/OV
Download 3.9.12 EAS
Download 3.9.11 EAS
Download 3.9.10 EAS
Download 3.9.09 EAS
Download 3.9.08 EAS
Download 3.9.04
Download 3.9.03
Download 3.9.02
A. TWRP Method
1. Download the DragonXiaKernel_v3.x.zip
2. Boot to TWRP Recovery
3. Install -> Select DragonXiaKernel_v3.x.zip
4. Magisk 12 included! Magisk 13 users need to reflash it.
5. Swipe to Install, Reboot
6. This step is only for advanced users! For enjoying the full performance delete or rename: .
/vendor/bin/perfd
/vendor/bin/thermal-engine
Thermal files remover
Explaination:
These binaries throttle your cpu. !!!
But keep intelli thermal in thermal section enabled.
Additional settings in this section you disable, please.
For setting up kernel, kernel auditor is recommended.
✽ MI5-Devs, XDA-Devs, Harrynowl, AKT Devs, You All
✽ Dragons Logo Credit : Golden Dragon by Kiril Climson @ Dribbble
kernel_xiaomi_msm8996
Mi Mix Dragon Xia
Status: Stable
Current Stable Version: 3.9.17
Stable Release Date: 2016-11-01
Created 2016-10-16
Last Updated 2017-06-01
Changes:
3.9.18
Popping sound in antutu fixed.
Reverted EAS to an earlier stage.
3.9.15
Interactive governor removed
3.9.14
Fixed a little bug
Introducing voltage control (Kernel Auditor only atm, EX kernel manager has a bug)
Back to WALT as default
3.9.12
Made PELT / WALT switchable
Changed to Helixschedutil to support PELT better
3.9.11
Switched from WALT to PELT
Several source updates
3.9.10 Schedutil as default governor
3.9.08 Fixed boost on touchscreen input and FP keymod
3.9.07 EAS
Fingerprint unlock booster reworked
3.9.05 EAS
Corrected GPU idle frequency in init.qcom.power.rc from 6 to 7
3.9.04:
Ambient / dt2w fix
3.9.03:
many more frequency steps
stock frequencies for cpu included in frequency table
several updates from lineage kernel.
3.9.02
OC for little cluster disabled
Some fixes.
Brought to you with permission of original creator @WhyOrean
Mi Mix version maintained by pappschlumpf
If you want to donate to the original developer WhyOrean
or to me
I'd love to try it.
Any requirements, like minimum MIUI version or any particular ROM base?
underlines said:
i'd love to try it.
Any requirements, like minimum miui version or any particular rom base?
Click to expand...
Click to collapse
no miui!!! Los/rr
still no miui until u use a beautifull dragon logo ???
Anyway good work... it's hard to compile a custom kernel to MIUI ? no search a course only time needed to create something like u, maybe with less feature...
Maybe i'll provide a miui version, but sorry, i'm zero interested in flashing any miui ROM to my mix. Means, i'll not test any miui version myself.
Enthusiasts are available to debug and report with logcat...
Cheers
Hi guys,
The developer has stated so many times that he's not interested in developing anything for miui roms. So unless you want him to run away, he's got enough work to do right now. So Have mercy on his soul.
Btw, do you have any idea how hard it is to blindly develope a kernel? It's hard and frustrating.
Sent from my MI MIX using Tapatalk
pappschlumpf said:
Maybe i'll provide a miui version, but sorry, i'm zero interested in flashing any miui ROM to my mix. Means, i'll not test any miui version myself.
Click to expand...
Click to collapse
Please release a MIUI variant.
lowrider_05 said:
Please release a MIUI variant.
Click to expand...
Click to collapse
Link to source in the op. Original dev has a miui branch for the kernel. Sync it an give it a go. If you're able to compile it i could provide the needed changes for making it work on the Mix.
Don't count on me if it comes to a miui version. And please don't spam my thread with Miui version wishes.
pappschlumpf said:
Link to source in the op. Original dev has a miui branch for the kernel. Sync it an give it a go. If you're able to compile it i could provide the needed changes for making it work on the Mix.
Don't count on me if it comes to a miui version. And please don't spam my thread with Miui version wishes.
Click to expand...
Click to collapse
Hi Erik,
Your hard work is appreciated, please accept this small donation.
Thanks,
Transaction ID:017852571P1696745
Sent from my MI MIX using Tapatalk
mohammed510 said:
Hi Erik,
Your hard work is appreciated, please accept this small donation.
Thanks,
Transaction ID:017852571P1696745
Sent from my MI MIX using Tapatalk
Click to expand...
Click to collapse
Thx again Mohammed I'm doing that for fun and for the community.
I thank you for your work.
pappschlumpf said:
Thx again Mohammed I'm doing that for fun and for the community.
Click to expand...
Click to collapse
I was wondering if it is possible? For you to make a kernel for Epic rom android 6.0 (marshmallow) for those of us who are still waiting for xposed to be released for android 7 ( nougat) and are stacked on marshmallow.
mohammed510 said:
Hi guys,
The developer has stated so many times that he's not interested in developing anything for miui roms. So unless you want him to run away, he's got enough work to do right now. So Have mercy on his soul.
Btw, do you have any idea how hard it is to blindly develope a kernel? It's hard and frustrating.
Sent from my MI MIX using Tapatalk
Click to expand...
Click to collapse
Hi. Mate although i never flashed any of Los/RR builds yet i know them; i everytime read all the comments on all pappschlumpf threads and appreciate all of his works. He used to compile one for miui rom before that we were using it, so it's not that awkward wish to expect a miui kernel from him.
We all see that he's not interested in miui, while he's doing a great job on both rom and kernel line which is incredibly awesome for anyone who picks a part. Also appreciate for your kind donations to him and excitement; quite admirable.
I personally wish such kernel on miui rom which is the secondary main reason for me to buy this device. Ps. I was using miui roms on my both previous s6e+ and Lg g3 devices. I'm like: ''Think about it.''
At the end of the day; such a great device and it's software on it but no kernel development. That is frustrating if you ask me. I'm hearing 'Learn and compile by yourself' lecture in my ears eh, but since there is such a good developer around; we just wish.
Last thing; it's not so blind developing for him, i believe. He's been there before. I know a kernel developer who owns ''a device'' and compiles his kernels for 2 different devices and 27 different variants of those devices. I don't mean anything but ''I have an idea''. So; let 'em keep their wishes since he says ''maybe''. Have a good day.
lesscro said:
Enthusiasts are available to debug and report with logcat...
Cheers
Click to expand...
Click to collapse
Well said.
pappschlumpf said:
And please don't spam my thread with Miui version wishes.
Click to expand...
Click to collapse
Spammed first and last time 'to clear' something out. Sorry.
Konsstantine34 said:
Hi. Mate although i never flashed any of Los/RR builds yet i know them; i everytime read all the comments on all pappschlumpf threads and appreciate all of his works. He used to compile one for miui rom before that we were using it, so it's not that awkward wish to expect a miui kernel from him.
We all see that he's not interested in miui, while he's doing a great job on both rom and kernel line which is incredibly awesome for anyone who picks a part. Also appreciate for your kind donations to him and excitement; quite admirable.
I personally wish such kernel on miui rom which is the secondary main reason for me to buy this device. Ps. I was using miui roms on my both previous s6e+ and Lg g3 devices. I'm like: ''Think about it.''
At the end of the day; such a great device and it's software on it but no kernel development. That is frustrating if you ask me. I'm hearing 'Learn and compile by yourself' lecture in my ears eh, but since there is such a good developer around; we just wish.
Last thing; it's not so blind developing for him, i believe. He's been there before. I know a kernel developer who owns ''a device'' and compiles his kernels for 2 different devices and 27 different variants of those devices. I don't mean anything but ''I have an idea''. So; let 'em keep their wishes since he says ''maybe''. Have a good day.
Well said.
Spammed first and last time 'to clear' something out. Sorry.
Click to expand...
Click to collapse
The original source is from Mi5 / nougat. IWhich means if there will be a stock version it will be for nougat!
Sorry guys, mm kernel, from my side a no. If one of you want's to do that job i could help with configs etc. But i'll not invest my rare free time to make a mm kernel.
pappschlumpf said:
The original source is from Mi5 / nougat. IWhich means if there will be a stock version it will be for nougat!
Sorry guys, mm kernel, from my side a no. If one of you want's to do that job i could help with configs etc. But i'll not invest my rare free time to make a mm kernel.
Click to expand...
Click to collapse
Fair enough man. Thanks for your effort to handle all these. [emoji106] Have a good day.
Anyone trying this on RR?
Sent from my MI 5 using Tapatalk
w20grippy said:
Anyone trying this on RR?
Sent from my MI 5 using Tapatalk
Click to expand...
Click to collapse
Yes. All good so far but you'll have to flash magisk after flashing kernel.
Sent from my MI MIX using Tapatalk
Loving this one so far. Super stable and fasssst.
Sent from my MI MIX using Tapatalk
Great kernel, works stable and fast. I only have one question. When I press the FP reader, it takes some time from the vibration to the screen turning on. Is there a setting that I could change to get that to be a bit faster?
My GF has a Redmi Note 3 and the delay is shorter there. Sorry, but I'm not really advanced when it comes to tweaking kernels. Thanks!
I am on RR and failed to flash as it came up with an error.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Back again!
You may remember me from my SkyDragon kernels for N6/M8/M7/G3 among other devices, I've been off XDA for a year or so, quietly making kernels and roms for myself and personal friends. Decided to come back to show the OP3 some love under my own moniker while the team is on hiatus.
This is the kernel I use as my daily driver, I'm not really looking to add things so if you want more, please find someone/thing else. My goal here to get as much performance out of our device(s) as possible without sacrificing any battery life or stability whatsoever. No Ofast or ffast-math flags that break IEEE and math operations. No beta toolchains. I compile my own toolchains from recent stable release, build them optimizing and targeting a specific processor instead of the whole architecture, and then I use those to build my kernels that are optimized for that same processor. So this kernel is meant to be as stable stock, all the performance, and none of the loss in battery. Anyways, on with the show..
~*~*Information*~*~
Kernel supports all OP3/OP3T devices running OOS Stable 5.0.x or OpenBeta 32-3x(OP3) and 23-2x(OP3T):good:
Kernel source is based on official OnePlus 3/3T openbeta source code :good:
Kernel has been compiled targeting msm8996 specifically :good:
All but C++, AR, objdump compiled with my custom-built Linaro 6.4.1 toolchain with LTO targeting msm8996/SD820/SD821 :good:
C++, AR, objdump from Qualcomm SnapDragon LLVM v6.0.2 targeting kryo :good:
Using ld.lld from clang 7 for linker :good:
No user setup required - optimal settings already applied :good:
~*~*Features*~*~
No user clock-speed modifications
Flar2 sleep/wakegesture features (Disabled by default, no vibration, enable with EX App)
Stock wake gestures still have vibrate functionality
Swappiness set to zero by default (we have plenty of ram)
vfs_cache_pressure set to zero by default (we have plenty of ram)
ZRAM disabled (why write to slow storage when we have all the ram)
Maple IO Scheduler set to default (IMO best balance of performance/battery life)
Westwood TCP Congestion Profile set to default (Personal preference)
CRC Check Toggle-able (disabled by default)(~%30 performance boost when disabled)
FSYNC Toggle-able
Boeffla's LED Notification
Boeffla's Wakelock Blocker
Savoca's KCAL Control
Fast Charge support for PC charging (1amp instead of .5amp)
Tweaked Alucard Governor (not default, will need to set manually)
DTS Eagle+DTS Ultra
KLapse-Livedisplay Support
~*~*Credits and Thanks*~*~
Telegram Group <333
frap129
Flar2
SultanXDA
MyFluxi
TheCrazyLex
Andip71
savoca
engstk
FranciscoFranco
Dorimanx
maxwen
arter97
dianlujitao
LazerL0rd
Joshuous
Tanish2k09
rupansh
DOWNLOADS
OOS/H2OS OREO
HDK_OP3_AK2_V6.6 Oxygen/Hydrogen OREO LINK
------------------------------------------------------------------------------
OOS/H2OS PIE
HDK_OP3_OOSP_V1.0 Oxygen/Hydrogen PIE LINK
NOTE:
Kernel zip tries to disable DM-Verity and forced encryption, you may need root however in order to boot.
Install if on something else: If in doubt, download this, flash latest openbeta zip from OnePlus, immediately reboot back into twrp, swipe to allow modifications, install this kernel, install magisk/supersu, profit.
If you're already on this: you can just flash my latest kernel zip and profit.
AOSP OREO/PIE
HDK_OP3_AK2_OMNI_V0.12 AOSP Oreo/Pie LINK
MD5: 736a8ee96e8462d21164eaf3f329e9d1
NOTE:
This kernel is built from Omnirom source), but should work fine on all AOSP based roms with Oreo blobs..
Has been tested and working with basically every aosp rom except DU and PixelExperience
Official Pie blobs - AOSP/LOS
HDK_OP3_AK3_AOSP_V1.0 LINK
MD5: 63a744f828631aba39fc8f452788665d
~~~~~~~~~~~~~~~~~~~~~~~~
Kernel's have been thoroughly tested but if you somehow find an issue or just want to leave feedback, that's always appreciated ^^
You can find changes(changelog) by looking at my posted source. You can also find my custom toolchain's, crosstool-ng, and other sources listed there.
If you want to contribute to testing pre-release kernels, or need further assistance please join our:
Discord Server
https://discord.gg/4FafqSV
~*~*Donations*~*~
If you want to donate to my coffee fund, I prefer any cryptocurrency over paypal.
Donate with Coinpayments
or just use paypal, thanks!
XDA:DevDB Information
[EOL][KERNEL][09 AUG][OP3/3T][OOS/H2OS/AOSP] HolyDragon [Oreo 8.x.x and Pie 9.0.0], Kernel for the OnePlus 3
Contributors
HolyAngel, Liam_Davenport, MarcAnt01
Source Code: https://gitlab.com/holyangel/OP3.git
Kernel Special Features: Maple IO, Flar Wake Gestures, KCAL, Notification LED customization, slow zram disabled, vfs/vmswap tweaked for performance, DTS Eagle for better audio experience, smoothest+best battery life.
Version Information
Status: Stable
Current Stable Version: 5.0 / 9.1
Stable Release Date: 2018-06-10
Created 2018-01-09
Last Updated 2020-01-14
Reserved
HDK-Mod - v1.0.0
This is my own modified build of Grarak's Kernel Adiutor app. Now unified for all my kernels.
I have added a few extras that were missing for sound control, pdesire audio, DCI_P3 mode, tbalden's kcal modificaiton, sultan's battery cycle/charge commit for msm8996, and Tanish2k09's KLapse-Livedisplay.
You may need to disable Play Protect temporarily to install, working on adding to the play store to negate this issue.
Also changed the theme, and updated some stuff.
Work in progress but needed something to fully control my kernel.
Full credits and much love to Grarak for putting in all the hard work on KernelAdiutor, wouldn't be here without his work.
My source for it is here.
This is an OOS Kernel yes? Or is it for Custom ROMs that are not based on OOS too?
thes3usa said:
This is an OOS Kernel yes? Or is it for Custom ROMs that are not based on OOS too?
Click to expand...
Click to collapse
Oxygen OS only ^^
Been using it for months. It's stable, smooth and battery friendly ^^
Sent from my ONEPLUS A3003 using Tapatalk
Stuck on 1+ logo after flashing on theOne3TOS.... (OB20 based)
twoxa said:
Stuck on 1+ logo after flashing on theOne3TOS.... (OB20 based)
Click to expand...
Click to collapse
May need dm-verity disabled/rooted if you're not already.
Finally posted something.. :good: Ran this for months before I sold my OP3 rock solid no bullsh!t. Good luck with the release!
Thanks ! I'll give a try just for the badass name
thes3usa said:
This is an OOS Kernel yes? Or is it for Custom ROMs that are not based on OOS too?
Click to expand...
Click to collapse
twoxa said:
Stuck on 1+ logo after flashing on theOne3TOS.... (OB20 based)
Click to expand...
Click to collapse
Bryandu13 said:
Thanks ! I'll give a try just for the badass name
Click to expand...
Click to collapse
Just updated kernel download link, was wrong. Make sure you got kernel version 3.7 before you flash please :good:
HolyAngel said:
Just updated kernel download link, was wrong. Make sure you got kernel version 3.7 before you flash please :good:
Click to expand...
Click to collapse
Now I understand why my device was soft bricked ?
Fortunately a dirty flash of my firmware was enough, no data loss.
I'll try the new one !
---------- Post added at 12:56 AM ---------- Previous post was at 12:42 AM ----------
Okay so :
- I flashed the 3.7 version and got stuck to OnePlus logo with "Powered by Android"
- I dirty flashed my ROM (BETA 29) and flashed the Kernel immediately after without rebooting and next I flashed Magisk 15 --> It booted
I'll see how the kernel run now.
Looking forward to trying this out! The name alone is pretty cool!
Hi, thank you for your effort for the kernel
Wanna ask, which apps I need to configure the kernel? Kernel Adiutor or EXKM?
Can It work on the H2OS?
Loved your work on my good 'ol M8, so I'm pretty excited to see you here. Thanks (as) always for the work!
Great to see a new kernel! Didn't see any mention about encryption or dm-verity. Does it bypass encryption and dm-verity?
Thanks
Excellent kernel it seems like solves the unbelievable, not compatible with Oreo's mobile phone game Caton problem.
By the way, what will happen if I use it on 7.1.1
Thanks a lot for the new Kernel, dude!
But, I would request you to add flar2 gestures, because in SA Region, it's kinda uneasy to use fp in winter!
came from a custom kernel on an encrypted 3T with magisk 15.2. managed to install this by first restoring stock versions of my system (system.img as opposed to just system) & boot (flashing Xennet's boot images w/ disabled dm-verity also works) backups. booted once to check everything's fine then back to recovery to flash the kernel. didn't need to reflash magisk as the system i restored from was already rooted. HTH someone who wanna try this kernel
thanks for your work, OP. will test & revert
Flashed on beta 19 but it broke wifi, i was on stock kernel before that. Any thoughts?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DESCRIPTION
Hey guys, I have started a custom Kernel based on LineageOS sources with 98% CAF. So I would like to share my own performance and usability improvements with minimal feature and enhancements on top. The intention is to have a minimal light-weight kernel that is very fine tuned for the device.
FEATURES
Minimal Kernel with a stripped defconfig base to be more streamlined and have less memory footprint
User space display color calibration (KCAL) with screen calibrated against iPhone 8 Plus, also helps reducing screen retention
Schedutil governor making use of EAS features with updates from Linux 4.4 and 4.12
Up to date with LineageOS sources for maximum compatibility and security bugfixes
Memory and cache subsystem optimizations, you will feel it
Adaptive LMK enabled by default
Transparent Hugepages are enabled
ZRAM/Swap partition is disabled by default
BFQ IO scheduler set by default to avoid slow-downs on task intensive scenarios
No overclocking was chosen to avoid unnecessary heat, optimizations were focused on other different areas
Kernel Samepage Sharing enabled with deferred timer by default to gain some memory usage optimizations, the process sleeps on regular basis and I've profiled it so that there's no battery drains due to it
Simple temperature controls for msm_thermals exposed
Compiled with GCC 6.x optimized toolchain and -O3 plus other hardware specific flags
Undervolted the Adreno 530 GPU voltage rail to keep things cooler
CAF Rebase on major portions of the Kernel has helped lower the memory footprint a lot
DOWNLOADS
AnyKernel: Click Here (Or check top of the post, download tab)
(Recommended) Stock Thermal Engine with Tweaked Values Flashable : Click Here
SOURCE
V20-Kernel-Gamma GitHub Source
NOTES
Here is a GeekbenchV4 result example : http://browser.geekbench.com/v4/cpu/10264423
KNOWN BUGS
Changing CPU governors will greatly impact EAS and give erratic behaivour -- please check here, here and here. This is an EAS only Kernel.
I would also like to thanks to various people who contribute tremendously such as:
@x86cpu
@EvilHowl
@USA-RedDragon
@savoca
@albinoman887
@emdroidle
@Rashed97
@joshuous
@RenderBroken
and many others!
<< If you like my work here is my hat, please donate! >>
XDA:DevDB Information
Gamma Kernel, Kernel for the LG G5
Contributors
Omar-Avelar
Source Code: https://github.com/oxavelar/V20-Kernel-Gamma
Kernel Special Features:
Version Information
Status: Testing
Current Stable Version: 0.0.3
Stable Release Date: 2018-10-10
Created 2018-10-09
Last Updated 2019-01-05
CHANGELOG
0.0.7 - Multiple battery charger as well as MTP transfer changes.
0.0.6 - USB storage and USB debugging are working. Missing a few charging optimizations implemented.
0.0.3 - Sound is now working. USB storage and USB debugging are not working at the moment, will fix that later.
0.0.1 - Initial version, with KCAL, GPU Undervolting, EAS schedutil, memory subsystem tweaks, and so far working and booting LineageOS 15.1.
Omar-Avelar said:
CHANGELOG
0.0.1 - Initial version, with KCAL, GPU Undervolting, EAS schedutil, memory subsystem tweaks, and so far working and booting LineageOS 15.1. I think the TWRP device string is H1. Hoping it works. I have confirmation it boots on RS998. And will add the rest of the devices later.
Click to expand...
Click to collapse
couple snafus
no sound probably related to the audio mods (ffs I don't know why I said eas lol)
no usb/mtp connection phone doesn't even know its plugged into a pc it will charge tho
gonna need to dump logcat to sdcard and get it from recovery
EXTREME BETA Warning here folks test and report don't expect to daily this!!
gimme some time I am still testing it lol its only been flashed 20m
I am assuming the two issues are just a driver or mal config probly can pull the needed changes from base LOS
loggie log logs long longs logging along lugging logs long ways
I think yours is the first custom kernel for lineage 15.1 for the g5. We're really lacking, so thanks for bringing your kernel over!
make it for h850 pls..... good job
otakutw said:
make it for h850 pls..... good job
Click to expand...
Click to collapse
Let me get it working fully for 1 variant (a couple of weeks as I have to go out of town due to work), and then I will build for the LineageOS supported variants. I will need users to tell me what is and not working. Apparently this is what is not working at the moment in v0.0.1 :
Audio
USB Storage
USB Debugging
Want to hear feedback as well on v0.0.2...
Omar-Avelar said:
Let me get it working fully for 1 variant (a couple of weeks as I have to go out of town due to work), and then I will build for the LineageOS supported variants. I will need users to tell me what is and not working. Apparently this is what is not working at the moment in v0.0.1 :
Audio
USB Storage
USB Debugging
Want to hear feedback as well on v0.0.2...
Click to expand...
Click to collapse
0.2
sound:yes
usb storage:no
usb Debugging:no
Legitsu said:
0.2
sound:yes
usb storage:no
usb Debugging:no
Click to expand...
Click to collapse
Thank you. I am glad sound is working now as well. With these I've now added the H830 and H850 Kernels as well. I will be checking the USB storage / debugging when I am back in 2 weeks. If it's urgent one can boot TWRP to get out the data from the phone or use AirDroid in the mean-time.
Let me know if you guys find any other quirks!
Thank you so much for doing this. I am eager to try the H830 when you start building that version.
Also, do you plan on adding support for fast charging?
On h830, usb debugging and mtp don't work (just confirming lol) but adb over wifi does work.
Edit: After a couple of days, I haven't noticed any sort of bugs different than the stock lineage.
0.3 so far so good nothing to report really
still no mtp/usb
wishing for more sound volume but that will come in time
as a note I didn't even know 0.3 was uploaded untill I looked at the downloads tab
It boots on RR and it is working pretty fine! I didn't test mtp for I don't have a computer on my hand and usb debugging either.
But finally there is kernel available for AOSP8.1 based ROMs.Thanks for your kernel.Looking forward to your updates.:laugh:
How do you install the kernal, just curious? Do I just flash it before flashing the rom, magisk, and gapps? Does it require a wipe? Thanks!
---------- Post added at 08:11 PM ---------- Previous post was at 07:32 PM ----------
harry110 said:
It boots on RR and it is working pretty fine! I didn't test mtp for I don't have a computer on my hand and usb debugging either.
But finally there is kernel available for AOSP8.1 based ROMs.Thanks for your kernel.Looking forward to your updates.:laugh:
Click to expand...
Click to collapse
When comparing to the default kernal, can you tell there is a difference and improvement to battery life due to this kernal? I'm using RR and it's plenty fast it is, but any improvement is always appreciated.
vmirjamali said:
How do you install the kernal, just curious? Do I just flash it before flashing the rom, magisk, and gapps? Does it require a wipe? Thanks!
---------- Post added at 08:11 PM ---------- Previous post was at 07:32 PM ----------
When comparing to the default kernal, can you tell there is a difference and improvement to battery life due to this kernal? I'm using RR and it's plenty fast it is, but any improvement is always appreciated.
Click to expand...
Click to collapse
After flashing this kernel and one day using it ,I can say that the battery life is definitely improved due to this kernel.
As for how to flash ,you just need to flash this kernel and no need to wipe anything.
Anyone else using this with any feedback on stability? Also just curious anyone have a link to the stock RS988 kernal in case I want to revert back after trying this? Thanks!
vmirjamali said:
Anyone else using this with any feedback on stability? Also just curious anyone have a link to the stock RS988 kernal in case I want to revert back after trying this? Thanks!
Click to expand...
Click to collapse
In my usage it's been at least as stable as the stock lineage kernel.
If you want to back up your current one, just do it in twrp.
no issue with stablity here
I did encounter a odd charging bug where it would only charged at 500mah after plugging it into the charger directly from the computer
but a reboot fixed it and I haven't had it happen again
I'm also experiencing a charging issue. At the moment I can only charge in recovery. Charging in the OS shows the charging battery symbol but doesn't actually charge. Other than that everything seems good
Thanks guys for the reports. Uploaded 0.4.0 to see if this hopefully fixes the charging issues as well as USB debugging and MTP not working. Let me know please
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel features:
Build with custom upstream LLVM 14.x (Clang 14.0.6 + LLD linker)
Full -O2 build with device and target flags enhanced, build improvements and compiler fixes, etc
Less is more: stockish builds based on Google latest sourcedrop for max stability (android-msm-sunfish-4.14-android13-qpr3)
Systemless installer (doesn't touch system partition, OTA friendly), AnyKernel3 backend (compatible with autoflash apps)
Removed some debug and logging options
Misc ARM performance and battery patches
CVE security patches, general upstream and CAF fixes for important subsystems
No OC, use 250HZ base timer frequency
Enhanced TCP methods (westwood is default), Network tweaks and updated drivers
Some I/O control tweaks, added schedulers ZEN v2 is default, advanced filesystems enabled (F2FS, ExFAT, NTFS, CIFS & NFS)
ZRAM Swap (LZ4 default, LZO-RLE ZSTD available)
Vibrator Strength tunable and Gesture Haptic Feedback control (touchpanel and FPR)
KGSL fixes and general improvements for GPU driver
adrenoboost ready (disabled by default)
KCAL - Advanced color control for Qualcomm MDSS v2 (RGB calibration and post-processing features)
KLAPSE support (v5.0)
Backlight min brightness and HBM option
Gamepad support enabled (xbox, ps4, switch)
USB Fast Charge (USB mode up to 900mA with MTP on)
FS fsync toggle on/off
Wakelock blockers available
TWRP Support(LZMA/LZ4 Ramdisk)
wireguard support
Compatible with EXKM, FKM , Kernel Adiutor and others
DOWNLOAD KERNEL ZIP
FKM download configs: HERE
(No mirrors please)
Setup and troubleshoot: To install just flash the zip on a stock setup with either TWRP or autoflash kernel app.
If you come from other kernel or have any issues, you should restore your stock boot.img or dirty flash your ROM before flashing blu_spark zip to avoid problems. Also uninstall or clean data of any kernel control app you're using.
If you are upgrading between blu_spark versions, just flash the kernel zip.
About bugs and reports: don't bother to post if a log isn't ready or without steps so the behavior can be replicated. I only active support stock ROM with NO mods whatsoever (apart from root). That includes NO support if using xposed, Magisk with added modules, etc.
If you're using custom ROMs (including stock based ones) you're much on your own. I'm mostly interested on debugging stuff in stock and stable ROM.
Also try not to spam the thread with OT. There's threads for all kind of stuff, use them.
Going back to stock: This kernel installer doesn't change your filesystem. You can backup your boot.img with TWRP or kernel app before flashing blu_spark if you want to go back to full stock or just dirty flash your full ROM.
Source Code: https://github.com/engstk/pxl4a
Don't forget to hit thanks, it's free
blu_spark r20 (A11)
First build is up!
Some of you may know me from other misc devices, specially Nexus and OnePlus. Recently got a Pixel 4a, so I decided to cook some goodies for it.
I've merge some of the usual stuff you'll find on my kernels, so features in OP are mostly in, some are WIP and some I want to do but might get axed (or added :silly
Stay tuned!
You can use FKM download kernel feature, just import the link bellow in the app :highfive:
blu_spark_r20 release
FKM download config: HERE
Build with Google Clang 11.0.5 + LLD linker
Latest Google October source drop for kernel, fts touch, techpack audio, rmnet data and qcacld-3.0
Initial merge of usual blu_spark goodies (checkout github for info)
Latest Magisk v21.0 mandatory for root in A11 (beta atm)
Click to expand...
Click to collapse
Keep in mind: I will give no active support for custom ROMs (including stock based ones).
I am mostly interested on debugging stuff in stock ROM (with logs and reproducible steps to replicate the issue).
No mirrors please
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
Ooooooh good to see you here sir! Cant wait to give this a whirl!!
Jast installed. Evrithing is good. Best Kernel.
Dude! So awesome to have @eng.stk developing for a device I own again! His kernels are always the best! Smooth and battery friendly. Do yourself a favor and flash this. Thanks for the work eng. Great to see you again.
Sent from my Nexus 5 using Tapatalk
jmtjr278 said:
Dude! So awesome to have @eng.stk developing for a device I own again! His kernels are always the best! Smooth and battery friendly. Do yourself a favor and flash this. Thanks for the work eng. Great to see you again.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
We meet again mate, enjoy :good:
eng.stk said:
We meet again mate, enjoy :good:
Click to expand...
Click to collapse
Kernel running great! Sent a coffee your way. Enjoy and thanks again.
Transaction id
8MD85879SD539420H
Sent from my Nexus 5 using Tapatalk
jmtjr278 said:
Kernel running great! Sent a coffee your way. Enjoy and thanks again.
Transaction id
8MD85879SD539420H
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Thank you for the support over the years mate.
I'm deeply grateful for all the good vibes since the early days on the N4 and the specially the fun we had on the N5. What a beast of a device.
Let's see how the Pixel run goes :highfive:
So far so good. Battery life seems to be on pace for 9hr SOT and that's even with AOD enabled which I never do just to squeeze every bit of battery life. Guess I'll report back sometime tomorrow to see how the first run goes. I know kernels usually take a few days before you can really get a benchmark. Been using your stuff since I developed on hammerhead all the way to OP6T. Missed how smooth and simple this kernel is.
First charge cycle. Very impressive, my friend. View attachment 5125905
Sent from my Nexus 5 using Tapatalk
Could I install this without TWRP? I wish to stick to full stock without having TWRP on (and cause the current TWRP build is not for 11 yet).
ngollop said:
Could I install this without TWRP? I wish to stick to full stock without having TWRP on (and cause the current TWRP build is not for 11 yet).
Click to expand...
Click to collapse
No twrp needed. Just use kernel flash tool included with exkm or franco kernel manager
Sent from my Nexus 5 using Tapatalk
Working great here
how do I verify that I successfully flashed the kernal and my device is using it?
how can I tell if I successfully flashed the custom kernel and my phone is actually using it? When I go under about phone this is all I see and it doesn't look like that I am on it. Can anyone help me confirm
xT29c said:
how can I tell if I successfully flashed the custom kernel and my phone is actually using it? When I go under about phone this is all I see and it doesn't look like that I am on it. Can anyone help me confirm
Click to expand...
Click to collapse
That's not it.
How did you flashed it?
Sent from my blu_spark'd OnePlus
eng.stk said:
That's not it.
How did you flashed it?
Sent from my blu_spark'd OnePlus
Click to expand...
Click to collapse
franco kernel manager
I was rooted before flashing
xT29c said:
franco kernel manager
I was rooted before flashing
Click to expand...
Click to collapse
FKM Manual flash is broken on A11, use the import json link in release post, that seems to work.View attachment 5126199
Sent from my blu_spark'd OnePlus
Looks like that was it! Thanks for your quick reply, time, and help!
eng.stk said:
Vibrator Strength tunable and Gesture Haptic Feedback control (touchpanel and FPR)
Click to expand...
Click to collapse
How can I tune the vibration strength? I can't find it in FKM.