Related
So I couldn't find my issue on google, and I read somewhere I should just start a thread since this seems...complicated.
I also read that the tablet only supports USB3.0 ports for this stuff, and IRONICALLY I was always using one.
Anyway, so I "unLocked" my boot loader from my android 4.1.1, then I installed CWM recovery, and flashed a 4.2.2 ROM. However, I hated the keyboard on that ROM, and I liked the menus more on the stock ROM, so I decided to switch back to that and see if I could just customize the latest ROM or something.
So I got the US 4.2.1 ROM from ASUS' firmware downloads page, and flashed it fine. I can use the tablet fully, no problem. I copied the files to root it onto my internal memory since I figured I would do it later. I try to boot it into RCK, there is no USB option(I figured that's normal since it wasn't plugged in). I select RCK, it's loading for a minuted, then the android is on the ground and there was some kind of exclamation mark above his open corpse. (I figure there's not too many errors like that, if you need more specifics I'll check it out again.
I thought maybe it needed a USB connection to load the RCK, but long story short I never have a USB option and RCK won't load, but android itself is fine. I thought maybe I needed the USB debugging(I turned that off momentarily after I had the ROM), I tried turning that back on, but no luck.
Any ideas?
Or tips. Tips are cool.
Rojikku said:
So I couldn't find my issue on google, and I read somewhere I should just start a thread since this seems...complicated.
I also read that the tablet only supports USB3.0 ports for this stuff, and IRONICALLY I was always using one.
Anyway, so I "unLocked" my boot loader from my android 4.1.1, then I installed CWM recovery, and flashed a 4.2.2 ROM. However, I hated the keyboard on that ROM, and I liked the menus more on the stock ROM, so I decided to switch back to that and see if I could just customize the latest ROM or something.
So I got the US 4.2.1 ROM from ASUS' firmware downloads page, and flashed it fine. I can use the tablet fully, no problem. I copied the files to root it onto my internal memory since I figured I would do it later. I try to boot it into RCK, there is no USB option(I figured that's normal since it wasn't plugged in). I select RCK, it's loading for a minuted, then the android is on the ground and there was some kind of exclamation mark above his open corpse. (I figure there's not too many errors like that, if you need more specifics I'll check it out again.
I thought maybe it needed a USB connection to load the RCK, but long story short I never have a USB option and RCK won't load, but android itself is fine. I thought maybe I needed the USB debugging(I turned that off momentarily after I had the ROM), I tried turning that back on, but no luck.
Any ideas?
Or tips. Tips are cool.
Click to expand...
Click to collapse
First I use usb 2.0 as I have no 3.0 ports and have no problems (just for info).
The 4.2 update changed the bootloader menu. Now when you enter the menu if you do nothing it will automatically enter fastboot - watch the upper left for a message. You will need usb debugging. I suggest leaving it turned on as you never know when there will be an issue and you can't get into the os to turn it on.
Good Luck!
Rojikku said:
So I couldn't find my issue on google, and I read somewhere I should just start a thread since this seems...complicated.
I also read that the tablet only supports USB3.0 ports for this stuff, and IRONICALLY I was always using one.
Anyway, so I "unLocked" my boot loader from my android 4.1.1, then I installed CWM recovery, and flashed a 4.2.2 ROM. However, I hated the keyboard on that ROM, and I liked the menus more on the stock ROM, so I decided to switch back to that and see if I could just customize the latest ROM or something.
So I got the US 4.2.1 ROM from ASUS' firmware downloads page, and flashed it fine. I can use the tablet fully, no problem. I copied the files to root it onto my internal memory since I figured I would do it later. I try to boot it into RCK, there is no USB option(I figured that's normal since it wasn't plugged in). I select RCK, it's loading for a minuted, then the android is on the ground and there was some kind of exclamation mark above his open corpse. (I figure there's not too many errors like that, if you need more specifics I'll check it out again.
I thought maybe it needed a USB connection to load the RCK, but long story short I never have a USB option and RCK won't load, but android itself is fine. I thought maybe I needed the USB debugging(I turned that off momentarily after I had the ROM), I tried turning that back on, but no luck.
Any ideas?
Or tips. Tips are cool.
Click to expand...
Click to collapse
You lost your version of Cwm when you flashed the official update.
You will need to find the version of TWRP that is posted on here that has been modified to work with new bootloader and flash it thru fastboot.
tobdaryl said:
First I use usb 2.0 as I have no 3.0 ports and have no problems (just for info).
The 4.2 update changed the bootloader menu. Now when you enter the menu if you do nothing it will automatically enter fastboot - watch the upper left for a message. You will need usb debugging. I suggest leaving it turned on as you never know when there will be an issue and you can't get into the os to turn it on.
Good Luck!
Click to expand...
Click to collapse
Thanks! That was INCREDIBLY helpful. I noticed that message but I didn't know what it meant. Funny the solution was so obvious...
flumpster said:
You lost your version of Cwm when you flashed the official update.
You will need to find the version of TWRP that is posted on here that has been modified to work with new bootloader and flash it thru fastboot.
Click to expand...
Click to collapse
Alright, thanks. I have no idea how that works, but if that's what I need to do to fix it whatever. xD
Rojikku said:
Thanks! That was INCREDIBLY helpful. I noticed that message but I didn't know what it meant. Funny the solution was so obvious...
Alright, thanks. I have no idea how that works, but if that's what I need to do to fix it whatever. xD
Click to expand...
Click to collapse
The twrp mentioned above can be found here.
tobdaryl said:
The twrp mentioned above can be found here.[/URL]
Click to expand...
Click to collapse
Thanks... I actually installed openrecovery-twrp-2.2.2.0-tf300t-JB.blob
On that note, I get a password prompt every time I boot into it. I read somewhere wiping and reinstalling helped with that, but even after wiping everything with every button I had I could still boot and everything was there...
And since APPARENTLY my internal storage isn't good enough, I can't install a 4.2.2 ROM(I'm still debating what ROM I will end up using.) I can't find anything in TWRP...
EDIT: To clarify, I can't find anything under / or /sdcard where I would normally find stuff.
Rojikku said:
Thanks... I actually installed openrecovery-twrp-2.2.2.0-tf300t-JB.blob
On that note, I get a password prompt every time I boot into it. I read somewhere wiping and reinstalling helped with that, but even after wiping everything with every button I had I could still boot and everything was there...
And since APPARENTLY my internal storage isn't good enough, I can't install a 4.2.2 ROM(I'm still debating what ROM I will end up using.) I can't find anything in TWRP...
EDIT: To clarify, I can't find anything under / or /sdcard where I would normally find stuff.
Click to expand...
Click to collapse
Wrong twrp! You need openrecovery-twrp-2.4.4.0-tf300t-4.2.blob until you are off stock 4.2 then you need openrecovery-twrp-2.4.4.0-tf300t-JB.blob. Unless the rom you flash is also for 4.2 bootloader. Both are located at teamwin.
4.2 changes directories in your sdcard for multi-user operation. Look under the 0 directory in /sdcard/0.
The password is for encryption that 4.2 uses to provide multi-user. The /sdcard allows total freedom under normal roms(even without root) but to stop user interaction 4.2 encrypts for user restriction. The first user gets directory 0 and so on.
Flash the proper twrp for 4.2 stock.
As far as flashing a new rom look at the op and determine if it is for the new stock 4.2 bootloader. If not do not flash over 4.2 but downgrade first. I have upgraded from 10.4.2.20 to stock 4.2 and downgraded from stock 4.2 to 10.4.2.20 several times without issue.
Stock 4.2 includes an assert to only allow upgrade from 10.4.2.20.
tobdaryl said:
Wrong twrp! [/URL]You need openrecovery-twrp-2.4.4.0-tf300t-4.2.blob until you are off 4.2 then you need openrecovery-twrp-2.4.4.0-tf300t-JB.blob. Both are located at teamwin.[/URL]
4.2 changes directories in your sdcard for multi-user operation. Look under the 0 directory in /sdcard/0.
The password is for encryption that 4.2 uses to provide multi-user. The /sdcard allows total freedom under normal roms(even without root) but to stop user interaction 4.2 encrypts for user restriction. The first user gets directory 0 and so on.
Flash the proper twrp for 4.2 stock and hold a minute or you are going right back where you were or worse. You need slightly more info before going forward and I need to check my notes while you get the proper twrp flashed.
Click to expand...
Click to collapse
Yeah, I really don't know that much about all this. I'd basically barely used android before I got this tablet a couple days ago, so I only have two days worth of experience...and I didn't get to use it a horribly large amount.
You seem like you're going to help a lot though, so thanks in advance. xD I'll get to flashing that twrp.
Rojikku said:
Yeah, I really don't know that much about all this. I'd basically barely used android before I got this tablet a couple days ago, so I only have two days worth of experience...and I didn't get to use it a horribly large amount.
You seem like you're going to help a lot though, so thanks in advance. xD I'll get to flashing that twrp.
Click to expand...
Click to collapse
I'll try but this new stock 4.2 is a new animal with many changes and we are just learning.
tobdaryl said:
I'll try but this new stock 4.2 is a new animal with many changes and we are just learning.
Click to expand...
Click to collapse
It actually was stock 4.1.1 >>; I just upgraded it. WHICH APPARENTLY WAS A HORRID DECISION. Regardless, I'm trying to install my twrp.img file, ran the command, and it's been writing for like ten minutes... 7672KB. I'm not certain if it's still writing or not...but it claims to be.
Rojikku said:
It actually was stock 4.1.1 >>; I just upgraded it. WHICH APPARENTLY WAS A HORRID DECISION. Regardless, I'm trying to install my twrp.img file, ran the command, and it's been writing for like ten minutes... 7672KB. I'm not certain if it's still writing or not...but it claims to be.
Click to expand...
Click to collapse
OK. Sometimes it takes seconds and sometimes longer. When you upgraded you used 4.2 (10.6.1.8)?
tobdaryl said:
OK. Sometimes it takes seconds and sometimes longer. When you upgraded you used 4.2 (10.6.1.8)?
Click to expand...
Click to collapse
Uhm. First. ****. It was frozen, so I canceled it and restarted it(Been a good twenty minutes doing nothing). Is it safe to reboot my tablet? I can't restart it, fastboot crashes. >>; Restart? Leave it? What?
I decided to take the risk and reboot it. Everything fine. I flashed the tool, ran the reboot command(Which actually didn't work... >>; But I rebooted it manually and it seems fine...)
On that note, is it actually possible to destroy a device beyond repair accidentally? And the TWRP tool said it flashed fine but I still have the old version. Odd....
I do have the image you said currently installed, I checked the version against my download.
Rojikku said:
Uhm. First. ****. It was frozen, so I canceled it and restarted it(Been a good twenty minutes doing nothing). Is it safe to reboot my tablet? I can't restart it, fastboot crashes. >>; Restart? Leave it? What?
Click to expand...
Click to collapse
I'm not sure where you are reading the above. Tell me your current situation and what rom you were on when you began this flash.
tobdaryl said:
I'm not sure where you are reading the above. Tell me your current situation and what rom you were on when you began this flash.
Click to expand...
Click to collapse
I originally flashed the ROM image of TF300T_US_epaduser_10_6_1_8_SDupdate, and I can still boot into that fine. I tried to install the RCK tool you recommended, but it froze. I did a ctrl+c, and then coldbooted the tablet. I tried to do it again, said it was fine, nothing happened. So I think "Maybe I need to boot into the OS and retry it after rebooting from there." So I do that, and now the recovery is frozen again. my command is fastboot -i 0x0b05 flash recovery twrp.img.
That the info you needed?
Rojikku said:
I originally flashed the ROM image of TF300T_US_epaduser_10_6_1_8_SDupdate, and I can still boot into that fine. I tried to install the RCK tool you recommended, but it froze. I did a ctrl+c, and then coldbooted the tablet. I tried to do it again, said it was fine, nothing happened. So I think "Maybe I need to boot into the OS and retry it after rebooting from there." So I do that, and now the recovery is frozen again. my command is fastboot -i 0x0b05 flash recovery twrp.img.
That the info you needed?
Click to expand...
Click to collapse
Go back and check my previous post with the links for twrp, I specified use of blob files. Either should work but some units seem to have an issue with img files. Also check that you have usb debugging turned on in developer options.
tobdaryl said:
Go back and check my previous post with the links for twrp, I specified use of blob files. Either should work but some units seem to have an issue with img files. Also check that you have usb debugging turned on in developer options.
Click to expand...
Click to collapse
I downloaded the .blob version now. That one worked fine. I guess it either didn't like the .img or my download was a bit corrupt.
I now have TWRP version 2.4.4.0.It still wants a password I never set though. I was just finishing making sure it actually worked as you posted.
Rojikku said:
I downloaded the .blob version now. That one worked fine. I guess it either didn't like the .img or my download was a bit corrupt.
I now have TWRP version 2.4.4.0.It still wants a password I never set though. I was just finishing making sure it actually worked as you posted.
Click to expand...
Click to collapse
When it asks for the password hit cancel and just ignore the error.
tobdaryl said:
When it asks for the password hit cancel and just ignore the error.
Click to expand...
Click to collapse
Okay. THEN what do I do? It doesn't seem to detect an OS even though I can boot into one. I can't find my ROM.zip in there and I'm not sure what to do from there... If I could find the ROM I would be fine, possibly. I'm trying to flash this one http://fitsnugly.euroskank.com/?rom=cm10&device=tf300t just to see if it works right. (I want it to show my dock's battery and have the overclocking menu in that drag-up interface.)
Rojikku said:
Okay. THEN what do I do? It doesn't seem to detect an OS even though I can boot into one. I can't find my ROM.zip in there and I'm not sure what to do from there... If I could find the ROM I would be fine, possibly. I'm trying to flash this one http://fitsnugly.euroskank.com/?rom=cm10&device=tf300t just to see if it works right. (I want it to show my dock's battery and have the overclocking menu in that drag-up interface.)
Click to expand...
Click to collapse
Thanks for the link. I looked at the info provided for that rom. You don't want to flash that over an encrypted tablet which you now have. The only safe way I have found to go to or from stock 4.2 rom is with stock 10.4.2.20.
To do that you would flash 10.4.2.20 with twrp, boot into os, reboot back to the bootloader which will now be four icons, select usb, use fastboot to flash twrp again, and now flash your new rom.
This sounds long but removes encryption from your tablet and you should be able to flash the jb rom of choice that does not require stock 4.2 bootloader.
I've got the Canadian Virgin Mobile Moto G, and I recently unlocked the carrier. I am going to unlock to bootloader to flash a rom with more languages, specifically Portuguese.. What rom should I use, I'm looking for the original Moto G software.
Zehmistah said:
I've got the Canadian Virgin Mobile Moto G, and I recently unlocked the carrier. I am going to unlock to bootloader to flash a rom with more languages, specifically Portuguese.. What rom should I use, I'm looking for the original Moto G software.
Click to expand...
Click to collapse
I'm running CM11 and a quick look the phone tells me that it have Portuguese for brazil and portugal, alternatively try any latin american stock rom: http://sbf.droid-developers.org/phone.php?device=14
Z-WolF said:
I'm running CM11 and a quick look the phone tells me that it have Portuguese for brazil and portugal, alternatively try any latin american stock rom: http://sbf.droid-developers.org/phone.php?device=14
Click to expand...
Click to collapse
Oh man, thank you for the link, I just might use that. Just a refresher, to flash It I would first unlock the bootloader, flash a new recovery, wipe, and then flash the new rom?
Zehmistah said:
Oh man, thank you for the link, I just might use that. Just a refresher, to flash It I would first unlock the bootloader, flash a new recovery, wipe, and then flash the new rom?
Click to expand...
Click to collapse
yep, but you don't need to flash a custom recovery for a Stock ROM.
Z-WolF said:
yep, but you don't need to flash a custom recovery for a Stock ROM.
Click to expand...
Click to collapse
Thank you!!! and one more question, the new rom should still be capable of getting OTA updates from whatever carrier's rom I flashed, correct?
Zehmistah said:
Thank you!!! and one more question, the new rom should still be capable of getting OTA updates from whatever carrier's rom I flashed, correct?
Click to expand...
Click to collapse
****. I think I ****ed up. http://forum.xda-developers.com/showthread.php?t=2727965
Zehmistah said:
****. I think I ****ed up. http://forum.xda-developers.com/showthread.php?t=2727965
Click to expand...
Click to collapse
Zehmistah said:
Okay so I unlocked my bootloader for my Moto G, and when It rebooted it said android was updating apps and then all the processes stopped working. It booted into the android startup but I couldn't get any processes running so it wouldnt work. I tried to reboot and now android doesn't even boot up. Should I flash a custom recovery right now and then wipe??? I haven't done anything to the phone other than carrier unlock and bootloader unlock. please help
Should I try this? http://forum.xda-developers.com/showthread.php?t=2542219 , or is it too risky right now? I'm planning to restore it to another stock firmware anyways.
Click to expand...
Click to collapse
First, don't panic.
Second, explain how do you unlock the bootloader, did you use this?
Third, what does the bootloader screen (Power+VolDown) says in the second to last line before the first break (LOCKED/UNLOCKED).
Fourth, if it says UNLOCKED, try to flash the ROM using this, otherwise try to unlock the bootloader again with the link i posted in the second point.
And don't worry as long as you can enter fastboot mode (bootloader) you can fix everything, and nothing of the things you are doing affects fastboot mode.
They all want money.
Sent from my GT-N7105 using xda app-developers app
Perry2547 said:
They all want money.
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Can you elaborate?
You can add more languages without a custom ROM using MoreLocale 2.
Z-WolF said:
First, don't panic.
Second, explain how do you unlock the bootloader, did you use this?
Third, what does the bootloader screen (Power+VolDown) says in the second to last line before the first break (LOCKED/UNLOCKED).
Fourth, if it says UNLOCKED, try to flash the ROM using this, otherwise try to unlock the bootloader again with the link i posted in the second point.
And don't worry as long as you can enter fastboot mode (bootloader) you can fix everything, and nothing of the things you are doing affects fastboot mode.
Click to expand...
Click to collapse
I used that webstie to unlock the bootloader, and when I went to fastboot it did say UNLOCKED status code: 3.
I left it plugged into my PC last night because It wouldn't turn off, and I think it wasn't charging because now it's off and won't turn on. I'm going to plug it into a wall charger and wait a few to check if it's on.
After that, I'll try the method you said.
EDIT: Seems like charging doesn't work either, weird... because it said it was connecting to my PC last night in Fastboot
Zehmistah said:
I used that webstie to unlock the bootloader, and when I went to fastboot it did say UNLOCKED status code: 3.
I left it plugged into my PC last night because It wouldn't turn off, and I think it wasn't charging because now it's off and won't turn on. I'm going to plug it into a wall charger and wait a few to check if it's on.
After that, I'll try the method you said.
EDIT: Seems like charging doesn't work either, weird... because it said it was connecting to my PC last night in Fastboot
Click to expand...
Click to collapse
That's weird, doing the steps in that page don't make changes big enough in the phone to make something like that happen.
What does it says in the line below UNLOCKED, USB CONNECTED or CONNECT USB DATA CABLE while you had it connected to your pc/wall?
Why don't you try to use another cable?
Z-WolF said:
That's weird, doing the steps in that page don't make changes big enough in the phone to make something like that happen.
What does it says in the line below UNLOCKED, USB CONNECTED or CONNECT USB DATA CABLE while you had it connected to your pc/wall?
Why don't you try to use another cable?
Click to expand...
Click to collapse
I don't remember what it said.
I've tried a few different wall chargers and cables. They seem to charge my other phones but not this one. I'm going to wait an hour and then maybe put it in the freezer for a few minutes
Zehmistah said:
I don't remember what it said.
I've tried a few different wall chargers and cables. They seem to charge my other phones but not this one. I'm going to wait an hour and then maybe put it in the freezer for a few minutes
Click to expand...
Click to collapse
That's a... unorthodox approach, but reading around it just might work.
I can only recommend you to put it in a sealed container and having a rice bag at hand afterwards, just in case.
Now if you can get it to fastboot mode, try to restore a backup (if you did one) or flash a ROM, im assuming that if you can connect a cable and send commands to fastboot it is charging the phone. BTW at this point if you can send commands and are tired trying to fix it, you can execute
Code:
fastboot oem lock
and you can claim the warranty, that behaviour is not normal, maybe something in the hardware side broke but until we test it more we can't be sure.
Now while we wait in for the phone to become a popsicle, can you detail how you unlocked it?
Z-WolF said:
That's a... unorthodox approach, but reading around it just might work.
I can only recommend you to put it in a sealed container and having a rice bag at hand afterwards, just in case.
Now if you can get it to fastboot mode, try to restore a backup (if you did one) or flash a ROM, im assuming that if you can connect a cable and send commands to fastboot it is charging the phone. BTW at this point if you can send commands and are tired trying to fix it, you can execute
Code:
fastboot oem lock
and you can claim the warranty, that behaviour is not normal, maybe something in the hardware side broke but until we test it more we can't be sure.
Now while we wait in for the phone to become a popsicle, can you detail how you unlocked it?
Click to expand...
Click to collapse
Ok, so I bought the phone and got it carrier unlocked, then yesterday I decided to flash a new rom to get the languages so I went to https://motorola-global-portal.cust...e/bootloader/unlock-your-device-a/action/auth. Unlocked the bootloader and when the phone was about to restart from cmd it said "FAILED" but rebooted anyways. It went into fastboot again and ti said it was Unlocked, when I selected Normal Reboot, it started up with the bootloader logo and continued on normally. It was then that it displayed the android startup page (Where you select language, sign into google, connect to wifi etc.) like I haven't used the phone before. Shortly after a popup came and said " Android is updating # of apps out of 137", once that was over every single process on the phone crashed.
Now I'm where I am now.
One more thing, I booted it into recovery before I unlocked the bootloader, accidently. Do you think it maybe could've wiped the original OS on the device?
Zehmistah said:
Ok, so I bought the phone and got it carrier unlocked, then yesterday I decided to flash a new rom to get the languages so I went to https://motorola-global-portal.cust...e/bootloader/unlock-your-device-a/action/auth. Unlocked the bootloader and when the phone was about to restart from cmd it said "FAILED" but rebooted anyways. It went into fastboot again and ti said it was Unlocked, when I selected Normal Reboot, it started up with the bootloader logo and continued on normally. It was then that it displayed the android startup page (Where you select language, sign into google, connect to wifi etc.) like I haven't used the phone before. Shortly after a popup came and said " Android is updating # of apps out of 137", once that was over every single process on the phone crashed.
Now I'm where I am now.
One more thing, I booted it into recovery before I unlocked the bootloader, accidently. Do you think it maybe could've wiped the original OS on the device?
Click to expand...
Click to collapse
As far as i know, you can't wipe the system with a stock recovery and with a "blank" OS your phone still connects to PC.
i forgotted this existed, at this point you can't lose anything in trying it. i dont recomend the bootloader bricker part for your case.
Z-WolF said:
As far as i know, you can't wipe the system with a stock recovery and with a "blank" OS your phone still connects to PC.
i forgotted this existed, at this point you can't lose anything in trying it. i dont recomend the bootloader bricker part for your case.
Click to expand...
Click to collapse
The phone isnt't being detected when I plug it in.
I've read that leaving the phone 24 hours untouched could also help the battery. I'm going to try that\
EDIT: GOT IT TO TURN ON!!!
Ok, so I got it working. The thread you told me first helped!! It works fine now with the Brazilian software. Thank you very much, you're a life saver.
Now... I've got another moto G to do the same to
Zehmistah said:
Ok, so I got it working. The thread you told me first helped!! It works fine now with the Brazilian software. Thank you very much, you're a life saver.
Now... I've got another moto G to do the same to
Click to expand...
Click to collapse
You had me worried there, i though it was a goner. in the end everything turned out okay.
Happy to be of service.
Good Evening,
AT&T LG G2 rooted, TWRP. Have installed a few different roms but mostly used PA. All of a sudden the phone started experiencing issues with cell Data. So I did a clean install of PA and then had issues with BT, did another clean install and had issues with Wifi.
So I decided ok maybe its time to go back to stock. Hook it up to a win7 computer... Device manager doesn't see it at all (doesn't show up AT ALL). Says charging and that is it, does not recognize that it is hooked up to a computer. Have tried several different computers now and several different USB cables. The only way I could try other roms was downloading via wifi. Tried a stock rom and still experiencing issues.
I think there is something wrong with the phone so I want to get it warrantied, but without hooking it up to a computer I can not figure out any way to remove the custom recovery or revert it to stock.No matter what I do no computer will even recognize the phone is connected, let alone trying to install drivers. Device manager just straight up does not see it.
Any help or suggestions is GREATLY appreciated. Any way to remove recovery/root without a PC connection?
UPDATE: Here was my solution
Took some work but I figured out a way to do it in case anyone else ever runs in to this:
(make sure you are stock rom or on a stock rooted rom before proceeding)
First download the stock recovery.img on the device.
http://downloads.codefi.re/autoprime...10B_Partitions
Then download/open Terminal Emulator and type:
su
Then
cd /sdcard/downloads
Then
dd if=/sdcard/downloads/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
That replaces TWRP/CWM with the stock recovery.
Then open supersu, go to settings, towards the bottom is full unroot.
Yay no more custom recovery or root on stock rom.
If you are planning on getting warranty you need to use download mode and the back to stock guide also that is the best way to flash to stock and get rid of problems
Sent from LG-G2 D800 on AEONFLEX 4.4.2
XxZombiePikachu said:
If you are planning on getting warranty you need to use download mode and the back to stock guide also that is the best way to flash to stock and get rid of problems
Sent from LG-G2 D800 on AEONFLEX 4.4.2
Click to expand...
Click to collapse
Agreed, problem is the computer will not see the phone, so I can't use the program to flash it back to stock.
It's not just a driver or com issue, the computer does not see it AT ALL. Device manager doesn't see a new device when I plug it in (in OS, in Download mode, nothing).
crawlgsx said:
Agreed, problem is the computer will not see the phone, so I can't use the program to flash it back to stock.
It's not just a driver or com issue, the computer does not see it AT ALL. Device manager doesn't see a new device when I plug it in (in OS, in Download mode, nothing).
Click to expand...
Click to collapse
Have you tried different usb ports also very important are you using original cable that came with the phone in my case if I try many of the different cables I have, only the stock one works for download mode
Sent from LG-G2 D800 on AEONFLEX 4.4.2
XxZombiePikachu said:
Have you tried different usb ports also very important are you using original cable that came with the phone in my case if I try many of the different cables I have, only the stock one works for download mode
Sent from LG-G2 D800 on AEONFLEX 4.4.2
Click to expand...
Click to collapse
Different usb ports, different computers, different cables (stock one included). No luck. Phone says download mode then goes to "firmware update" and says at the bottom B53 then "ROOTED" in red letters. Nothing appears in device manager.
In android regarless of rom if I plug it in it doesn't act like I plugged it in to a computer, just charging. Again nothing in device manager regardless of USB debugging or not.
currently have twrp 2.6.3.3, running D80210b 4.2.2, with baseband M8974A-AAAANAZM-1.0.190034
What I really need to know is if there is any way to restore stock recovery and remove root without using that method (ie using Terminal Commands or flashing a package, since I can download via wifi).
I am pretty sure this phone has a messed up USB port, but I don't really want to send it in with it rooted/twrp on it .
crawlgsx said:
What I really need to know is if there is any way to restore stock recovery and remove root without using that method (ie using Terminal Commands or flashing a package, since I can download via wifi).
I am pretty sure this phone has a messed up USB port, but I don't really want to send it in with it rooted/twrp on it .
Click to expand...
Click to collapse
Did you try restore & reset functionality on the phone? I had somewhat similar issue with the plug & pop feature (although my laptop recognized the phone under Devices & Printer but it didn't show it as a separate drive) when I flashed CM11 but then I did a full factory reset, everything goes back to normal. Also you might try uninstall LG driver and reinstall it. Hope this help.
paulthuong said:
Did you try restore & reset functionality on the phone? I had somewhat similar issue with the plug & pop feature (although my laptop recognized the phone under Devices & Printer but it didn't show it as a separate drive) when I flashed CM11 but then I did a full factory reset, everything goes back to normal. Also you might try uninstall LG driver and reinstall it. Hope this help.
Click to expand...
Click to collapse
Unfortunately it is not a driver issue, it doesn't show up in device manager at all, on several machines.
I have tried multiple different roms, factory rests, even tried ADB sideloading, no luck.
i remember there's this app called Auto Rec that has an option to unroot the device or something like that.
Took some work but I figured out a way to do it in case anyone else ever runs in to this:
First download the stock recovery.img on the device.
http://downloads.codefi.re/autoprime/LG/LG_G2/VS980/Stock_Firmware/10B_Partitions
Then download/open Terminal Emulator and type:
su
Then
cd /sdcard/downloads
Then
dd if=/sdcard/downloads/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
That replaces TWRP/CWM with the stock recovery.
Then open supersu, go to settings, towards the bottom is full unroot.
Yay no more custom recovery or root on stock rom. (this was after flashing a rooted stock rom by downloading it on the device itself since I had no USB).
crawlgsx said:
Took some work but I figured out a way to do it in case anyone else ever runs in to this:
First download the stock recovery.img on the device.
http://downloads.codefi.re/autoprime/LG/LG_G2/VS980/Stock_Firmware/10B_Partitions
Then download/open Terminal Emulator and type:
su
Then
cd /sdcard/downloads
Then
dd if=/sdcard/downloads/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
That replaces TWRP/CWM with the stock recovery.
Then open supersu, go to settings, towards the bottom is full unroot.
Yay no more custom recovery or root on stock rom. (this was after flashing a rooted stock rom by downloading it on the device itself since I had no USB).
Click to expand...
Click to collapse
So did this worked for you? And what about your warranty?
I have an issue with the vibration and I am thinking of going to stock and send my G2 to LG.
petran_7 said:
So did this worked for you? And what about your warranty?
I have an issue with the vibration and I am thinking of going to stock and send my G2 to LG.
Click to expand...
Click to collapse
It worked perfectly and I got the phone exchanged without any hassle, but if your USB is working there are plenty of better ways to return to stock. This was an option I had to use because of USB not functioning. I mean this would allow you to unroot without wiping/restoring but if your going to send the phone in anyway you might as well wipe it as well.
crawlgsx said:
It worked perfectly and I got the phone exchanged without any hassle, but if your USB is working there are plenty of better ways to return to stock. This was an option I had to use because of USB not functioning. I mean this would allow you to unroot without wiping/restoring but if your going to send the phone in anyway you might as well wipe it as well.
Click to expand...
Click to collapse
I understand and thank you for the reply.
I am a bit afraid of the other methods I saw and this one seems easier
I have a question if you can answer to me.
I restored the official rom from TWRP and did all the process you wrote. Is there any way to check if now I have the stock recovery?
And to see if I am now ready to send my phone to LG?
P.S. "I will hit the thanks button tomorrow because I have reached the limit of 8 thanks per day "
petran_7 said:
I understand and thank you for the reply.
I am a bit afraid of the other methods I saw and this one seems easier
I have a question if you can answer to me.
I restored the official rom from TWRP and did all the process you wrote. Is there any way to check if now I have the stock recovery?
And to see if I am now ready to send my phone to LG?
P.S. "I will hit the thanks button tomorrow because I have reached the limit of 8 thanks per day "
Click to expand...
Click to collapse
Just reboot to recovery, you should get the stock LG recovery instead of TWRP. If you unrooted as well, you are good go. Glad I could help! No worries on the thanks .
crawlgsx said:
Just reboot to recovery, you should get the stock LG recovery instead of TWRP. If you unrooted as well, you are good go. Glad I could help! No worries on the thanks .
Click to expand...
Click to collapse
When I am going to recovery, appears the Factory hard reset option.
I did it and it shows up again when I am trying to boot to recovery.
Again thank you for your replies and the time you spend. :highfive:
petran_7 said:
When I am going to recovery, appears the Factory hard reset option.
I did it and it shows up again when I am trying to boot to recovery.
Again thank you for your replies and the time you spend. :highfive:
Click to expand...
Click to collapse
Awesome sounds like you got it. :good:
So I have to congratulate and thank once more this man @crawlgsx for this great thread.
It worked on my D802 (international model) and got it repaired by the official service center of LG in Greece.
Great work, with no need of PC and difficult processes.
Noob question, but will this allow users to take OTA updates? Running stock rooted right now and really don't want revert to stock to get latest ota, but this seems pretty seamless. Thanks.
thestrangebrew said:
Noob question, but will this allow users to take OTA updates? Running stock rooted right now and really don't want revert to stock to get latest ota, but this seems pretty seamless. Thanks.
Click to expand...
Click to collapse
I believe that in order to take OTAs you must be on stock rom and stock recovery. Be rooted will not be a problem if you have these stock but when OTA installed you will lose root access.
If I am wrong, correct me someone.
Hi
Sorry to bump this thread but I need to unroot my AT&T G2 800 so get the warranty.. I had taken the stock backup using twrp.
Can I restore the restore it using twrp ? and do i need to install Terminal emulator on my restored stock rom and then do the commands ?
Are there any chances of bricking the phone ?
Is it possible to root one plus one, without deleting any data and apps from it? I just want root access but don't want any custom rom.
yes, of course..
root doesn't delete any of your data
senaferdy79 said:
yes, of course..
root doesn't delete any of your data
Click to expand...
Click to collapse
Thanks for that. How can I do that?
#newtorooting
senaferdy79 said:
yes, of course..
root doesn't delete any of your data
Click to expand...
Click to collapse
That isn't technically true. In order to get root you must have a custom recovery installed. In order to install a custom recovery you must unlock the bootloader. Unlocking the bootloader wipes the device.
---------- Post added at 08:13 PM ---------- Previous post was at 08:10 PM ----------
sourabhkejriwal said:
Thanks for that. How can I do that?
#newtorooting
Click to expand...
Click to collapse
Sorry you got your hopes up, but the other poster isn't right. As per my reply to him you need to unlock your bootloader first, which is going to wipe your device. I'd suggest backing up any files that you have that are important to you. As for your apps and settings, you'll have to set them up again afterwards. Go to my guide thread here:
http://forum.xda-developers.com/oneplus-one/general/guides-bacon-timmaaas-how-to-guides-t2839471
You need to follow (in order) sections 1, 2, 3, and 4. This will give you root access on your stock ROM. You should also follow section 10, it's very important that you make a backup of your EFS partition.
timmaaa said:
That isn't technically true. In order to get root you must have a custom recovery installed. In order to install a custom recovery you must unlock the bootloader. Unlocking the bootloader wipes the device.[
Click to expand...
Click to collapse
So are you saying all the many how to's that tell you that you can skip installing recover are wrong? Apparently, I don't have enough posts yet to create a link but I've seen posts here on XDA that say other wise and the one I have in front of me at the moment is from ibtimes . com titled "how-root-oneplus-one-install-twrp-recovery-1450708"
Their "Step-7" reads
Step-7: If you want to root the phone without installing TWRP recovery, type the following command
fastboot boot twrp.img
Click to expand...
Click to collapse
I guess the real question being, why would you need a custom recovery?
pdhx said:
So are you saying all the many how to's that tell you that you can skip installing recover are wrong? Apparently, I don't have enough posts yet to create a link but I've seen posts here on XDA that say other wise and the one I have in front of me at the moment is from ibtimes . com titled "how-root-oneplus-one-install-twrp-recovery-1450708"
Their "Step-7" reads
I guess the real question being, why would you need a custom recovery?
Click to expand...
Click to collapse
You're looking at outdated information. They used to be correct, but now they are wrong. This is because you can no longer use the fastboot boot recovery.img command with a locked bootloader. In fact, that functionality was removed quite some time ago.
You need a custom recovery because that's how you flash SuperSU to get root. There's no way around it.
Transmitted via Bacon
The default recovery will only flash cm signed zip, which is another reason for needing a custom recovery. That method you mention at ibtimes meant that it would allow you to, for one boot cycle, do a "live boot" of twrp
Sent From Lollipopified Bacon Goodness!
But how is anything going to be written to the system partition if it is locked ?
timmaaa said:
You're looking at outdated information. They used to be correct, but now they are wrong. This is because you can no longer use the fastboot boot recovery.img command with a locked bootloader. In fact, that functionality was removed quite some time ago.
You need a custom recovery because that's how you flash SuperSU to get root. There's no way around it.
Click to expand...
Click to collapse
Ugh, was afraid of that, you might want to add a comment to that effect to your guide....
Would have been nice to just add a setting to the default recovery to allow you to toggle whether you need a signed zip or not. Sucks that I could root my SGS III (which is far less hacker friendly than the One) without wiping it but I can't do that for the One, all i want is root for the moment. However, after playing around some more I'm getting stick before I even get that far; I can get ADB to find the device but when I adb reboot bootloader I cannot get fastboot to find the device. I've tried multiple drivers, different USB ports. When my One goes into fastboot the screen seems awfully dim, almost like it hasn't completely initialized, is that normal? And if so, any suggestions on why I can get adb to work but not fastboot?
pdhx said:
Ugh, was afraid of that, you might want to add a comment to that effect to your guide....
Would have been nice to just add a setting to the default recovery to allow you to toggle whether you need a signed zip or not. Sucks that I could root my SGS III (which is far less hacker friendly than the One) without wiping it but I can't do that for the One, all i want is root for the moment. However, after playing around some more I'm getting stick before I even get that far; I can get ADB to find the device but when I adb reboot bootloader I cannot get fastboot to find the device. I've tried multiple drivers, different USB ports. When my One goes into fastboot the screen seems awfully dim, almost like it hasn't completely initialized, is that normal? And if so, any suggestions on why I can get adb to work but not fastboot?
Click to expand...
Click to collapse
The one's bootloader is not like a nexus one where you can at least reboot recovery etc, once it boots thats it
what do get when you type fastboot devices ?
bombadier said:
The one's bootloader is not like a nexus one where you can at least reboot recovery etc, once it boots thats it
Click to expand...
Click to collapse
Which seems to be somewhat limiting for such an otherwise developer friendly device?
bombadier said:
what do get when you type fastboot devices ?
Click to expand...
Click to collapse
Nada, nothing, nil. however, "adb devices" works fine... WTF?
pdhx said:
Which seems to be somewhat limiting for such an otherwise developer friendly device?
Nada, nothing, nil. however, "adb devices" works fine... WTF?
Click to expand...
Click to collapse
Point one was just to say there is not anything really you can do in the bootloader, being able to reboot to recovery etc is actually a handy feature
Try a different fastboot.exe ? if you say that adb works perfectly then there has to be something wrong with your fastboot binary
I have attached my one,download and change the name back to .exe and see what happens
Going to need more info in order to help
bombadier said:
Point one was just to say there is not anything really you can do in the bootloader, being able to reboot to recovery etc is actually a handy feature
Try a different fastboot.exe ? if you say that adb works perfectly then there has to be something wrong with your fastboot binary
I have attached my one,download and change the name back to .exe and see what happens
Going to need more info in order to help
Click to expand...
Click to collapse
Fair point about bootloader, what I don't get is why they forced you to have to do the unlock to root? All I started out wanting to do was install Titanium and run a Nandroid or two. Guess if I'm going to have to wipe I guess I may end up installing a Lollipop ROM. However, I still can't get there. The fast boot you supplied gives the same problem. I was running the latest fastboot from the Android SDK and your's appears to be the same (though I haven't done a binary compare). As far as I can tell that leaves the device drivers, the laptop, or the phone itself. I'm running Win 7 SP 1 64 bit and I've tried various drivers including the Samsung the Google generic and they make no difference. Not sure how they would since adb works but I've seen some suggestions that drivers can be finicky in this regard.
What else can I tell you that might help?
Seems since I can get into the recovery that comes with the phone I could maybe get a works around somehow?
pdhx said:
Fair point about bootloader, what I don't get is why they forced you to have to do the unlock to root? All I started out wanting to do was install Titanium and run a Nandroid or two. Guess if I'm going to have to wipe I guess I may end up installing a Lollipop ROM. However, I still can't get there. The fast boot you supplied gives the same problem. I was running the latest fastboot from the Android SDK and your's appears to be the same (though I haven't done a binary compare). As far as I can tell that leaves the device drivers, the laptop, or the phone itself. I'm running Win 7 SP 1 64 bit and I've tried various drivers including the Samsung the Google generic and they make no difference. Not sure how they would since adb works but I've seen some suggestions that drivers can be finicky in this regard.
What else can I tell you that might help?
Seems since I can get into the recovery that comes with the phone I could maybe get a works around somehow?
Click to expand...
Click to collapse
They're "forcing" you to unlock the bootloader in order to root the device because that's the universally accepted standard (unlock bootloader, install custom recovery, flash root). Some devices have super secure bootloaders and that's why you end up needing to use hacks to get those devices rooted, but that isn't the normal way to go about it. Anyway, there's no advantage to leaving the bootloader at all. There's also no disadvantage to unlocking the bootloader at all. You might say that the fact that the device is wiped during the unlocking process is a disadvantage, but that fact is very well documented both here, on the OnePlus forums, and pretty much any other reputable tech site that mentions unlocking the bootloader on this phone. The point to that last sentence? It pays to research a device thoroughly before buying it, or before using it, the wiping of the device is no issue at all if you do it when you receive the phone (prior to using it), like many people have. But in your situation you're just going to have to backup any important media from the phone prior to unlocking.
Anyway, on to your fastboot issue. Exactly which drivers do you have installed on your PC? Do you have any other phone drivers or software installed on the PC? And do you have access to another PC in case the one you're using is the source of the issue?
Got it, 27th try (give or take) is the charm.... Had to use USBdeview and uninstall the Google and the Qualcomm drivers. Reinstalled the Google drivers (after a reboot) and got it to work. Guess I could have figured that out from dev manager by watching what drivers got activated while fastboot was active but nothing ever jumped out at me as an obvious culprit.
Interesting to note that TWRP now automatically prompts you to install SuperSU if you reboot after installing it. Maybe it found the zip but either way, nice touch!
Now to go and decide what ROM to install....
Thanks for your help!
I would suggest temasek unofficial cm12 ROM. Been using it pretty much as a daily driver since version 1.something of the ROM and no problems. At this point it's been almost a month of not having to boot into my cm11s ROM lol. I use it with AK kernel, seems like a good match cuz both devs are working together looks like. Flash AK ukm special edition after flashing his kernel and install synapse from play store if you want to play around with settings of the kernel
Sent From Lollipopified Bacon Goodness!
zenix23456 said:
I have been using AnyRooter for months and it is quite good to root OnePlus phones.
Click to expand...
Click to collapse
Except the Oneplus One.
I'm gifting my father in law an Honor 6X. I already unlocked the bootloader and rooted, but I'd like for him to be able to install updates when they're released. If I uninstall all the bloatware while rooted and then relock the bootloader, will root be retained? Will TWRP be removed? Will OTA updates be allowed? This is all on the stock ROM.
Superorb said:
I'm gifting my father in law an Honor 6X. I already unlocked the bootloader and rooted, but I'd like for him to be able to install updates when they're released. If I uninstall all the bloatware while rooted and then relock the bootloader, will root be retained? Will TWRP be removed? Will OTA updates be allowed? This is all on the stock ROM.
Click to expand...
Click to collapse
I believe you should be able to receive updates with the bootloader unlocked. The OTA might relock the bootloader and will most likely remove root. In order to update you will need to also have stock recovery installed so there would be no way for him to root again without unlocking the bootloader and flashing twrp.
BakedOnSomeSour said:
I believe you should be able to receive updates with the bootloader unlocked. The OTA might relock the bootloader and will most likely remove root. In order to update you will need to also have stock recovery installed so there would be no way for him to root again without unlocking the bootloader and flashing twrp.
Click to expand...
Click to collapse
Ok. He's clueless when it comes to even using stock phones, so I'll probably completely return the phone to stock and call it a day. Is there a thread floating around here to do relock, unroot, and completely return to stock?
Superorb said:
Ok. He's clueless when it comes to even using stock phones, so I'll probably completely return the phone to stock and call it a day. Is there a thread floating around here to do relock, unroot, and completely return to stock?
Click to expand...
Click to collapse
https://forum.xda-developers.com/honor-6x/how-to/how-to-to-stock-emui-5-0-flashing-twrp-t3679985
BakedOnSomeSour said:
https://forum.xda-developers.com/honor-6x/how-to/how-to-to-stock-emui-5-0-flashing-twrp-t3679985
Click to expand...
Click to collapse
That says it's for after you've flashed custom ROMs. I've never flashed a ROM on mine, only unlocked and rooted. Haven't even uninstalled any apps yet. Is there a quick way to relock and unroot?
Superorb said:
That says it's for after you've flashed custom ROMs. I've never flashed a ROM on mine, only unlocked and rooted. Haven't even uninstalled any apps yet. Is there a quick way to relock and unroot?
Click to expand...
Click to collapse
Its also if you flashed twrp not only custom roms. You can uninstall root in the superSU app when selecting full unroot in the settings. I believe a factory reset can do it too. The next step would be to download the firmware for the phone and using fastboot to flash a boot and recovery image and then to lock the bootloader. Those steps are all in the link. That is the quickest way.
BakedOnSomeSour said:
Its also if you flashed twrp not only custom roms. You can uninstall root in the superSU app when selecting full unroot in the settings. I believe a factory reset can do it too. The next step would be to download the firmware for the phone and using fastboot to flash a boot and recovery image and then to lock the bootloader. Those steps are all in the link. That is the quickest way.
Click to expand...
Click to collapse
Damn, I was hoping it would be as easy as "fastbook oem lock" and be done with it.
Superorb said:
Damn, I was hoping it would be as easy as "fastbook oem lock" and be done with it.
Click to expand...
Click to collapse
Same. if you need any additional help with the process just let me know.
BakedOnSomeSour said:
Same. if you need any additional help with the process just let me know.
Click to expand...
Click to collapse
Thanks! Where can I find the EMUI 5.0.1 image? Mine is BLN-L24.
Superorb said:
Thanks! Where can I find the EMUI 5.0.1 image? Mine is BLN-L24.
Click to expand...
Click to collapse
There's a PC application called firmware finder. https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
You can download firmware finder on your phone too and download the files from there. It's on the play store.
BakedOnSomeSour said:
There's a PC application called firmware finder. https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
You can download firmware finder on your phone too and download the files from there. It's on the play store.
Click to expand...
Click to collapse
Ok, downloaded the Firmware finder and I have no idea how to use it. Directions don't make any sense and I have no idea what I'm doing after entering in my phone model.
I'm trying, but this phone is so different from my old LG G2 to play around with.
Superorb said:
Ok, downloaded the Firmware finder and I have no idea how to use it. Directions don't make any sense and I have no idea what I'm doing after entering in my phone model.
I'm trying, but this phone is so different from my old LG G2 to play around with.
Click to expand...
Click to collapse
When you get into the Firmware Finder(PC) app youll notice your on a tab labeled "Main Page". Click on the tab labeled "common base" and type BLN-L24 into the search bar at the top right and then click on FIND. A list of firmware will pop up. Find the one that matches your build number and then click on the link under the "filelist" section. There will be two or three different zips you need to download. When you have the three downloaded let me know.
BakedOnSomeSour said:
When you get into the Firmware Finder(PC) app youll notice your on a tab labeled "Main Page". Click on the tab labeled "common base" and type BLN-L24 into the search bar at the top right and then click on FIND. A list of firmware will pop up. Find the one that matches your build number and then click on the link under the "filelist" section. There will be two or three different zips you need to download. When you have the three downloaded let me know.
Click to expand...
Click to collapse
Ok, I've downloaded all 3 zip files from my build at over 2gigs.
Superorb said:
Ok, I've downloaded all 3 zip files from my build at over 2gigs.
Click to expand...
Click to collapse
Ok now extract the files from the update.zip folder. Then take the UPDATE.app from the extracted files and open it with update extractor: https://forum.xda-developers.com/showthread.php?t=2433454
After that your ready to follow the steps on the other guide.
So I screwed up. Before you posted I unrooted via unSU flashable zip. Then I fastboot flashed boot and recovery to the stock one from the update.app file. Now it's got some verification error on power on and OTA updates fail. I tried moving the update.app to a dload folder on sdcard, but when it starts up it fails at 5% when restoring from the sdcard.
ETA: Tried the 360 FW which updated successfully. Booted and asked for password. After panicking shutdown and copied the HW contents to Sdcard and did the update again which succeeded. Booted and asked for password again and I panicked again. Pulled the Sdcard and booted into stock recovery. Wiped everything and then restarted crossing fingers. Started up like normal, no password request! So it looks like the phone is back on totally stock EMUI 5.0. I'll hope for the update and will try with fingers and toes crossed. Thanks for your help. I may be back, but hopefully not.
ETA2: There's no update option above the last About option in settings... How do I get the update option?
Superorb said:
So I screwed up. Before you posted I unrooted via unSU flashable zip. Then I fastboot flashed boot and recovery to the stock one from the update.app file. Now it's got some verification error on power on and OTA updates fail. I tried moving the update.app to a dload folder on sdcard, but when it starts up it fails at 5% when restoring from the sdcard.
ETA: Tried the 360 FW which updated successfully. Booted and asked for password. After panicking shutdown and copied the HW contents to Sdcard and did the update again which succeeded. Booted and asked for password again and I panicked again. Pulled the Sdcard and booted into stock recovery. Wiped everything and then restarted crossing fingers. Started up like normal, no password request! So it looks like the phone is back on totally stock EMUI 5.0. I'll hope for the update and will try with fingers and toes crossed. Thanks for your help. I may be back, but hopefully not.
ETA2: There's no update option above the last About option in settings... How do I get the update option?
Click to expand...
Click to collapse
Edit: Before trying below steps. Just put the files from "BLN-L24_hw_usa"(b360) into dload folder and flash with dload. It might update the version.img without the needs for the steps below. if that brings the build number back to b360 use the hisui(PC) application to connect to the phone and update
Ok i forgot to mention something. The reason you dont have a update option is because you are on b360 which never had a button. Your build number on your phone will say b366 but thats incorrect. You cant receive an ota automatically because the phone thinks its already on the latest version. You need to take the UPDATE.APP from the "BLN-L24_hw_usa" (b360) folder and extract the VERSION.IMG file. It needs to be flashed with TWRP because fastboot wont work for some reason. That file will fix the build number and change it back to b360 so you can receive the OTA which will also restore the missing apps and features. That means you have to unlock the bootloader. Flash twrp. Flash the vendor.img with twrp and then do the dload method.
You have all the files and have done it already so this time will be easier. Ive done this way too many times with this phone. Sorry i forgot the mention the one step
Build number on my phone is already 360, and it has never been 366. Tried flashing the 360 like you said via dload and nothing seems to have changed.
Also the SIMtray eject tool seems to just go into the phone without ejecting the tray. A paperclip worked, but man this phone is really frustrating.
Superorb said:
Build number on my phone is already 360, and it has never been 366. Tried flashing the 360 like you said via dload and nothing seems to have changed.
Also the SIMtray eject tool seems to just go into the phone without ejecting the tray. A paperclip worked, but man this phone is really frustrating.
Click to expand...
Click to collapse
Oh ok my build number always got stuck at b366. Try connecting with the HiSuite program and getting an OTA. And yes this is the strangest, most difficult phone to work with that ive ever owned.
BakedOnSomeSour said:
Oh ok my build number always got stuck at b366. Try connecting with the HiSuite program and getting an OTA. And yes this is the strangest, most difficult phone to work with that ive ever owned.
Click to expand...
Click to collapse
Wife made me box it up and ship to her dad, so I no longer have the phone. I did install the HiSuite when I first powered on the phone and it was never able to connect and see the phone, so who knows what's going on.
Thanks for all your help. I have another one, but I'm just going to sell it and be done with it. No idea what other phone I can get with the same specs for the same price that's not so difficult to flash, but I'll keep looking I guess.
Superorb said:
Wife made me box it up and ship to her dad, so I no longer have the phone. I did install the HiSuite when I first powered on the phone and it was never able to connect and see the phone, so who knows what's going on.
Thanks for all your help. I have another one, but I'm just going to sell it and be done with it. No idea what other phone I can get with the same specs for the same price that's not so difficult to flash, but I'll keep looking I guess.
Click to expand...
Click to collapse
Its not difficult. In order to connect to hisuite you need to enable developer settings and allow usb debugging or type hisuite in the settings search bar and click "allow HiSuite to use HDB". I got this phone for christmas and i already know a ton about it. It may seem complicated now but its really nothing.