Px6 brick forever ?????? - MTCD Android Head Units Q&A

Hello, I introduce myself since I am new here, my name is Tony I hope to learn a lot from all of you
I have a Dasaita PX6 Android 10 with resolution 1280X720 recently acquired, download this RoomHal9k_Mod_4.0_MTCD_MTCE_PX6_eng.rar and purchased the Modinstaller2, delete factory data, install the APK of modinstaller2, open it, select Android 10, enter the recovery, select USB, enter nothing, then do not find anything. After a while I gave it a reboot and it came back to normal, I opened the Modinstaller2 again, I chose android 9, it put "wait" and the screen went black with some stripes, I do not go into recovery mode anymore, wait and wait a long time when not doing absolutely I gave nothing to the reset and it did nothing, I tried it in a thousand ways, combinations and everything that occurred to me but it is still black, when trying to turn it off it lights up and turns off but it does not start or exit recovery mode or absolutely nothing so I imagine I will have spoiled it, if anyone knows any solution, remedy or whatever, I would be grateful to be able to recover my new radio
Many thanks to everyone in advance
I am new to this android and the truth is I have no idea about all this so I beg your patience and if the question does not go in this thread please ask the administrator to change it where appropriate, thanks

tonyvillar said:
Hello, I introduce myself since I am new here, my name is Tony I hope to learn a lot from all of you
I have a Dasaita PX6 Android 10 with resolution 1280X720 recently acquired, download this RoomHal9k_Mod_4.0_MTCD_MTCE_PX6_eng.rar and purchased the Modinstaller2, delete factory data, install the APK of modinstaller2, open it, select Android 10, enter the recovery, select USB, enter nothing, then do not find anything. After a while I gave it a reboot and it came back to normal, I opened the Modinstaller2 again, I chose android 9, it put "wait" and the screen went black with some stripes, I do not go into recovery mode anymore, wait and wait a long time when not doing absolutely I gave nothing to the reset and it did nothing, I tried it in a thousand ways, combinations and everything that occurred to me but it is still black, when trying to turn it off it lights up and turns off but it does not start or exit recovery mode or absolutely nothing so I imagine I will have spoiled it, if anyone knows any solution, remedy or whatever, I would be grateful to be able to recover my new radio
Many thanks to everyone in advance
I am new to this android and the truth is I have no idea about all this so I beg your patience and if the question does not go in this thread please ask the administrator to change it where appropriate, thanks
Click to expand...
Click to collapse
I am a bit confused with what you already tried, so let's see if you can get into recovery. Turn on the head unit and use a small piece of wire or tooth pick to press the reset button for about 15 seconds until the front panel lights start to flash, then release and do a short press on the button, that should take you into recovery mode. (I have Dasaita head units without physical buttons)

Solution
Al Ferro said:
I am a bit confused with what you already tried, so let's see if you can get into recovery. Turn on the head unit and use a small piece of wire or tooth pick to press the reset button for about 15 seconds until the front panel lights start to flash, then release and do a short press on the button, that should take you into recovery mode. (I have Dasaita head units without physical buttons)
Click to expand...
Click to collapse
Hello and thanks for the information, the recovery mode did not come out in any way, I had to make a recovery SD which I recognized and installed android and taking me to the recovery where I could update it and make it work as if it were new, thanks for the information

tonyvillar said:
Hello and thanks for the information, the recovery mode did not come out in any way, I had to make a recovery SD which I recognized and installed android and taking me to the recovery where I could update it and make it work as if it were new, thanks for the information
Click to expand...
Click to collapse
Ah cool. So posted first, then read forums and figured it out, while other members spent their time to take you through basics of recovery. At least you responded to your own post you figured it out.

Related

[Q] Galaxy Nexus Boot Loop (stock)

I have an unlocked HSPA+ Galaxy Nexus imported from the UK to the US. Ordered from Negri Electronics.
It's not rooted or modded in any way.. Mainly because I don't know how to. As far as I know, it's running stock ICS.
I was using it normally, (using the fb messenger app if it makes any difference) when it suddenly rebooted by itself. The Google logo comes up, then the start up animation, and sometimes the home screen will appear but is not touch sensitive (i cannot slide it to unlock), and then it 'hangs' and the screen goes black. Repeat.
I've tried to fix this by myself and there's a video on youtube (sorry, noob here. can't post links. video is by robbidwv and title is "my galaxy nexus won't boot..") of the same problem that I have, but the posted solution doesn't work for me.
So far, I have entered Coin Mode and pressed Start. Entered Fastboot mode and gone into Recovery Mode (no options appear after that. it just starts booting up and the loop begins), and I've also tried Restart Bootloader.
I've almost given up. Now all I want is to extract my SMS, if they're still on my phone. I can't access the folders on my computer because it won't boot up and connect. Is there a way that I can extract my SMS by using DOS in either Coin Mode or Fastboot mode?
Or even better, does anyone have a solution to this boot loop problem? I'll contact Negri Electronics tomorrow and hopefully they can send me a replacement.
Please help!! Thanks
that problem just started happening with me an hour ago!!
i hate this!!
we need a solution please!
Hey guys, sorry about the issue.the major problem I see here is you wanting to retrieve your txt messages, which might be possible with a little Modding, but if yourwilling to lose them to get a working phone back, then this is what your going to have to do. Make sure your phone is completely off. Hold the 2 volume buttons and the power button together. You will get into a mode with an android Guy. Press the volume button up or down until it says reboot recovery at the top. Press the power button. It will rebootand come to a screen with an android. Hold volume up,down and power at the same time. A menu will come up. Go down to wipe data. Click it, and after it is done reboot. Your phone should work now.
If this helped you, or you simply appreciate me taking the time to write this out then please press the thanks button
Hey!
Thanks. Yeah I 'fixed' it already. I was just about to post something similar. After a while I just gave up on trying to recover my data. Good thing that Google syncs everything so the only issue would be recovering my messages, which I decided weren't worth sending it in for a repair which would probably not be able to recover anything anyway.
The thing I didn't know about was to press power + volume up WHILE on the recovery screen. I thought navigating to the recovery screen was it!
Still, this kind of sucks. I love my GNex, but I can't help but be slightly pissed seeing that my crappy iPhone 3GS never did this in the 2 years I had it. Oh well, hope it doesn't happen again!
hey guys! i also did a complete wipe on my phone and got it working again!
but i wonder why this happened in the first place?
last application i installed before the crash was double twist, i dunno why but i feel that it was the reason behind the boot loop!
Sorry for reviving this thread, but I just had this happen to me TWICE!
It happened to me first last Monday, the 23rd - the phone crashed when trying to send an email with an attachment - and went into a boot loop - Google logo would appear, no make it to the animation, and reboot....
I performed a full reset and things worked again. I didn't install all the apps I had before - figuring it must have been due to some app messing with the OS.
Well, it happened again to me yesterday! I was connecting to my bluetooth headset when the phone crashed and went into the boot loop. Full reset worked again, and I've installed even fewer apps - essentially only those that I use on a daily basis.
My phone is still on 4.0.1 and I'm hoping once 4.0.4 is pushed this may get resolved? I have a canadian GNex from Negri. I will call them again (I called the first time, but when the full reset worked I never contacted them again).
I would like to this this is a software issues, and not hardware.
I have the same problem. If you figure it out let me know.
Today my phone also entered a boot loop: [Google logo]->[black screen]->[vibration]->[Repeat]
I tried Recovery Mode, but this is what happens: (sorry for the link but I am not trusted with powerful tools such as outside links apparently, as I have not yet reached the maturity of a person with eight posts... )
dl(dot)dropbox(dot)com/u/53568097/Android.jpg
This is what I see when I navigate to Recovery Mode
For a split second I can see an image of an Android with spinning cogs in his innards, but then this little sad fellow appears. WTF is this?
EDIT:
Oh, and I'm running Android stock 4.0.2, never rooted or unlocked, Swedish. At the time when the phone started doing this, I was using Endomondo, and was about to set off on my bike when it died on me.
Stock ROM galaxy nexus bootlooping after wiping data also.
Hi,
My GNex went into a bootloop so i searched xda and found that factory reseting would be helping my prob. But after wiping the data also its still in going through the loop . Please help .:crying:

[Q] Fastboot not working, stuck on load screen.

I installed clean rom about a year ago, so unsure what version it could be on the top of my head.
I have not updated my firmware or anything.
The only thing I did before I resetted my tablet was change a few settings.
1. I changed the resolution so it would help save me some battery.
2. It had an option to use 4.1 of android instead of 4.2, so I did that.
Other then that I read around the forum and came to the conclusion I might have soft bricked it but in the other forums they were messing with cache and was in the process of installing. So I was unsure if I should come to that conclusion, hence I started a thread.
Tried to PWR + vol down, but it vibrates and shows nothing on screen.
Shows the Logo then it increases in size (assuming at that time it was changing resolution) and then it just gets stuck.
Not sure what I could do from here on out.
Thanks ahead for your time.
xirosil said:
I installed clean rom about a year ago, so unsure what version it could be on the top of my head.
I have not updated my firmware or anything.
The only thing I did before I resetted my tablet was change a few settings.
1. I changed the resolution so it would help save me some battery.
2. It had an option to use 4.1 of android instead of 4.2, so I did that.
Other then that I read around the forum and came to the conclusion I might have soft bricked it but in the other forums they were messing with cache and was in the process of installing. So I was unsure if I should come to that conclusion, hence I started a thread.
Tried to PWR + vol down, but it vibrates and shows nothing on screen.
Shows the Logo then it increases in size (assuming at that time it was changing resolution) and then it just gets stuck.
Not sure what I could do from here on out.
Thanks ahead for your time.
Click to expand...
Click to collapse
How did you change the resolution?
Are you saying the tablet vibrates continously when trying to boot into the BL??
Did you wait long enough when trying to get to the bootloader?
You have to hold the buttons until the tablet vibrates twice, then you should see the bootloader menu.
If you can't get there, you may be in bad trouble unless you have nvflash blobs.

[Completed] [Q] A Tough Bootloop Problem...

Good day to all. I'm here resorted to ask about my problem here because I really can't handle it. I been googling for days. I'm ran out of resources from both google and tablet. So, I hope you can help me here. Note I'm going to write this in FULL detail here, so expect this to be a extremely long post. (I been warning you) So here goes....
Anyone uses the brand Ramos?(kind of unpopular brand) I use Ramos W21, it's been using it around 1 year and a half, and it endured a lot of problems, but fixed by researching on online forums and apply various methods there. Now, I think it's finally gave up...
One time, when I opened it and play my usual apps and browsing, it caused the errors " unfortunately
google.process.gapps has stopped", unfortunately browser has stoped",and "unforturnately google play has stopped". Then, I tried to clear data the similar apps in settings as usual, and even disabling them. Then more errors exploded, and "unfortunately launcher has stopped" appears. The menu screen(where the usual wallpaper and shortcut apps are located) turns black, while my running apps are still there running. When I pressed the back key to exit the app, now only tons of errors from the launcher appears endlessly(while the screen is black.
The time I finally turned it off by hard reset it made its way to the main problem: the bootloop.
Okay, here's where the thing gets real. It opens with the usual ramos logo, but the next one is a silver flashing android logo instead of enlarged ramos logo with spinning fire from the letter o(which is NOT my usual boot up screen) When I turned it off, it reopens again up to flashing silver android logo and the cycle repeats, even with pin reset until battery dies out. No recovery mode, so I can't use it to fix this. USB connections can't be recognized when inserted to PC. And no, the tablet is not rooted, and I don't customized anything, no mods, and no fancy roms. Just using a stock rom.
So now what? All I have here is just a sd card slot, which I think there's hope in there. Right now it has two options, deal with it and fix with all of might, or repair it in the nearest repair shop(something that is pretty risky, a lot of fakes and robbers here)
Well, this is the first time I post here, so sorry for anything that goes wrong. Thanks in advance.
Hi, thank you for using XDA Assist. It sounds like a rouge app has replaced your boot animation. Rather than try to chase that down and try to fix it I'd flash the stock firmware and start all over. Unfortunately there is very little about your device on XDA. So you'll probably have to google that.
Solved!!!
Update: I FINALLY FIXED IT!!! IT WAS A MIRACLE!!! O.O
After I keep on wrecking it's power buttons and volume buttons, I discovered something decisive!
This tablet actually HAS RECOVERY MODE! Again, it has a recovery mode! However, the way how to input it is very unique compared to most devices, including other devices from the same brand!
Now having the power of recovery state, I first selected "wipe data cache". The old large Ramos logo with spinning fire appeared again! But it's still bootlooping. So I went back on recovery state, selected "factory reset" and boom, IT BOOTS LIKE BRAND NEW!!! (sacrificing my old data though)
Okay, I don't want this recovery mode powers to be kept only by me. So I'm going to share it to all Ramos users,especially the model W21, like right now!
1. To do this, you need power button and volume up button.
2. While bootlooping, hold the power button and volume button at the same time and it will turn it off(Then expect it to turn on back up again automatically)
3. When it opens up again to the small Ramos logo(no fire animation), now RELEASE the POWER BUTTON ONLY, and keep holding the volume up button. Note, this is important! If you do anymore than this, it will either black out, go bootlooping once again, or ultimately, nothing.
4. Keep holding the volume up button, then the ramos logo will disappear, and now it will enter to our holy grail, RECOVERY MODE! Congratz!
Now when you finally have a normal working Ramos tablet again, you may go there again by turning it off by "Power Off" (assuming that your tablet is open) then holding the power and volume up(then follow above!)
I hope this will help a ton for Ramos users! :laugh:
I'm glad you got it working. You should post your solution here, http://forum.xda-developers.com/general/general More people with your device will look there than in the Assist forum. Name the post something like [SOLVED] RAMOS Bootloop Problem
jd1639 said:
I'm glad you got it working. You should post your solution here, http://forum.xda-developers.com/general/general More people with your device will look there than in the Assist forum. Name the post something like [SOLVED] RAMOS Bootloop Problem
Click to expand...
Click to collapse
Well thank you then for the link. Gotta go there!
Thread closed.

Help requested for bringing S7 Edge back to life

Dear Learned ones,
I recently purchased a second hand Samsung S7 Edge phone, only to find out that it has a software KingRoot installed in it. I went into kingroot and then pressed some options to unroot it and then deleted kingroot app thinking it would have done the job but apparently not.
Now I have been trying to follow some youtube videos how to factory restore the phone but am stuck. The phone isn't simply going into download mode at all. I tried pressing vol down + power + main button but it simply does not work.
I would greatly appreciate if you can please help me with how do I go about restoring it to the factory mode.
Peace
no1sbusiness said:
Dear Learned ones,
I recently purchased a second hand Samsung S7 Edge phone, only to find out that it has a software KingRoot installed in it. I went into kingroot and then pressed some options to unroot it and then deleted kingroot app thinking it would have done the job but apparently not.
Now I have been trying to follow some youtube videos how to factory restore the phone but am stuck. The phone isn't simply going into download mode at all. I tried pressing vol down + power + main button but it simply does not work.
I would greatly appreciate if you can please help me with how do I go about restoring it to the factory mode.
Peace
Click to expand...
Click to collapse
Hi mate
Sometimes is tricky to get into download mode , when system is not 100% ok timing becomes an issue, keep trying it should work
Once there just flash a fresh firmware
Sometimes holding Volume Down & Home & Power until the phone reboots twice will work if doing it only once fails
Thank you, both for your replies and assistance. I have tried holding all three buttons down for good minute but nothing happens. It feels like that the screen lights up a little and then goes off again. I have been trying it over and over again few times but nothing happens
When I do it few times, it then comes back saying Android is starting... Optimising app XX of 102 and then starts normal again.
Is there a way i can insert two pictures here for you to see the main screen?
no1sbusiness said:
Thank you, both for your replies and assistance. I have tried holding all three buttons down for good minute but nothing happens. It feels like that the screen lights up a little and then goes off again. I have been trying it over and over again few times but nothing happens
When I do it few times, it then comes back saying Android is starting... Optimising app XX of 102 and then starts normal again.
Is there a way i can insert two pictures here for you to see the main screen?
Click to expand...
Click to collapse
As i said , is a matter of timing , keep trying , hold and release try again
So you can boot? are you rooted?
In the reply window is paperclip symbol click it there you can attach picture...but i am not sure if you are yet allowed...

Samsung J7 Prime (2017) SM-G610Y Boot Looping Problem

Good day, this would be a pretty lengthy post. I'd like to describe my experience clearly since I don't know what I possibly skipped over as I am very positive that my efforts have been correct basing on prior XDA forums. I even made this account solely for posting this to ask for help formally along with archiving this problem I'm having for those having a similar experience.
I've been working on my mom's phone this whole day and there are fruits of my current hard work. I am immensely stressed and despairing with my situation.
The Problems
Infinite boot looping
Can't access the recovery menu (power, volume+, even with home button)
Can access the ODIN / Download menu
Can't turn off either (holding down power button has no effect)
What I've done so far
I read XDA forums about similar experiences. Can't really access the recovery menu so I've factory reset.
We live in the Philippines and this phone is open line, so I went with those requirements while searching stock ROMs.
I downloaded the stock ROMs of the phone model via galaxyfirmware.com which was positively shared in the forums.
Did trial and error with it and eventually got the right one. I have formed a level of understanding with the filenames and eventually knew which is compatible.
Used Odin3 to Flash the BL, AP, CP, CSC, and even go Nand Erase and got the PIT file inside the CSC (Opened it using winrar)
The flashing is actually successful and quite fast to be honest.
The phone reboots itself and shows that it is still sadly boot looping.
Also, despite the several files used for the Flash, still can't access the Recovery Menu.
With that said, I have also tried using Frija which automatically downloaded the stock ROMs based on the model name and CSC type. Placed it in ODIN again and no changes, still boot looping.
I also can't put the TWRP I got here because of the FRP Lock, which can be undone via the settings of the phone. But since it's boot looping, I can't really do much about installing a custom ROM.
Currently, my dad is letting the phone drain its battery, since we can't really turn it off. The phone model doesn't have easily detachable battery as well, unlike the old days.
For some additional notes of what happened prior to this incident
My mom was just playing with her phone as her usual days went on. That day, she installed a new hotel-themed game she saw on Google Play. As I assume that it's from the app itself and not on some shady apk website, I saw no problem with it and didn't think it was the cause of all this. I went with the theory anyway and with the flashing, using CSC instead of HOME_CSC (which apparently saves the existing data on the phone from wiping), and even used the Nand Erase in the end. It's still stuck at boot looping.
I would appreciate anyone's reply to this discussion. I am truly desperate to fix this for my mom. If worse comes to it, I'll save money to buy her a brand-new phone.
You don't have a working android, so you won't remove the RFP. TWRP will not help you with this.
The symptoms you describe indicate a defective power button.
You manage to enter download mode because the power button is constantly on.
Because of the constantly on power button, you have no way to turn off the phone. Bootloop can also be the result of a constantly on power button.
To sum up, you should fix the power button.
1. The easiest way is to blow with compressed air and press the edge of the button with your fingernail, rapidly releasing the pressure. Perhaps the fuzz has blocked the button. Unfortunately, this rarely works.
2. Take the phone to a local service center.
Hi ze7zez! Me and my dad greatly appreciates your insight and we were definitely enlightened on this angle.
We didn't really think that the power button was stucked pressed on because you can clicking sounds when you press on it. The phone never had problems with the buttons along the 6 years it accompanied us, perhaps its age does start to show.
We're going to look into it tomorrow. Thank you very much! You gave us the idea that it may be shorted inside or some sort. Thank you again!
A bit of update.
I pried open only the back case of the phone so I can see and clean up the power button. I used tools specifically for it and made no damage on the phone during the process.
We couldn't really see anything busted from there. The buttons on the circuit still do the neat clicking sounds on it. Battery still looks the same.
Testing out the theory that the power button was stuck on:
We tried to only press and hold the volume down and power button. It didn't go to the download menu. We needed to press down all three together to access it. It is confusing since we believe it would be a power button issue too, as the phone instantly turns on by itself when plugged to a power source (it's completely drained by now and we still can't turn it off manually)
Perhaps it's an internal circuit problem with the power button? It's confusing with the fact we still have to press on it to access the ODIN menu if it was like "on" the entire time it's looping.
Thank you in advance for further insights.
Try restarting by pressing home, power and volume up all at once.
Hi Pranav2406,
I have tried that as well in order to access the Recovery menu to factory reset, but no luck.
We have given up on repairing the phone and went out yesterday to buy a new one in a rush.
We will still send this broken phone to a repairman.
If he fixes it, I'd ask what he did on it so I can post an update on this problem as well.
It's better to let the expert troubleshoot it.
I do suspect the problem in the phone's hardware. I'm pretty confident with all the stock ROM flashing I've done so it's not a software problem.
Thank again for everyone's insights.
Perhaps this case is too much for an amateur to fix.

Categories

Resources