Dead Phone , pitch Black Screen Asus Z010D - General Questions and Answers

My asus z010d went mad one day.
And stopped responding. After a restart it got stuck at Boot up Logo. I hard reset the phone and rebooted still not fixed... again tried to load a custom from.. everything made it worse...
now the phone has gone pitch black whatever I do..... Even logo is not showing......
I flashed using qfil. My computer shows download complete..... in qfil.
But phone doesn't show any difference in my phone

Related

[Q] Device bricked after ICS, Screen stays Black without Light

Hello,
yesterday i was so happy about the tw ics update for the TF101G that i couldn't wait and updated it with the blob file flashed to mmcblk0p4.
After the first restart the Asus flash process worked and restartet the device again like everytime i flashed my transformer with this method.
But after the restart the screen stayed black and the background light too and nothing happend.
I tried to restartet the device several times after this but nothing happend, the only thing that works now is APX mode that i can see in my device manager but since i have a tf101g that has sbk3 it wont help me.
So it seems my device is bricked forever. Recocery wont work, normal Boot wont work, not even the screen shows whats up but stays black.
I hope someone can help me because its hard to see an so expensive paperweight in front of me.
And i hope my english isnt that bad to understand.
have you tried plugging it into the mains and rebooting?
Have loaded the battery over night but it didnt helped.
Looks like my expensive Paperweight will stay one.
Loaded the Battery since then and tried to reboot and blind recovery in case only the display driver or something wont work but the display stays dark black.

[Q] D838 brick, cant tell if soft or hard

i tried installing a custom rom on my g pro 2 but eventually the device got some errors. i tried to restart but the phone wouldnt start. it boots to LG logo (not moving) and blank screen and same thing over and over again. so i tried to go for download mode, which is half gone. when i plug the phone into download mode, the first screen comes out, download mode. then screen goes blank and nothing else. my pc doesnt detect anymore, it just shows an unknown usb bulk device and 8 usb drives pop up.
i tried factory reset too but nothing. stays erasing forever.
i have the KDZ File already and the flashing tool. i just don't know how to flash it like this.
solved
Disaster Master said:
i tried installing a custom rom on my g pro 2 but eventually the device got some errors. i tried to restart but the phone wouldnt start. it boots to LG logo (not moving) and blank screen and same thing over and over again. so i tried to go for download mode, which is half gone. when i plug the phone into download mode, the first screen comes out, download mode. then screen goes blank and nothing else. my pc doesnt detect anymore, it just shows an unknown usb bulk device and 8 usb drives pop up.
i tried factory reset too but nothing. stays erasing forever.
i have the KDZ File already and the flashing tool. i just don't know how to flash it like this.
Click to expand...
Click to collapse
problem solved. after the factory reset i pulled out the battery and download mode worked again
great to know that you fixed it

Stuck at boot screen even after restore with tot method...

Hello Everyone,
I have been trying to help my friend with his soft-bricked G3. He wasn't rooted and had never even played with flashing anything, it just stopped booting one day and would display the "LG Life's Good" boot screen for a few seconds before going black and then just repeating this endlessly. I was able to get into recovery and download mode so I used the tot method to flash back to stock after a hard reset just produced the same results.
When I flashed the stock firmware, everything appeared to work fine, it went through the MiniOS bootup and everything, said success, gave me the hard reset status screen so when it finished I pulled the battery as instructed and rebooted but the phone still has the same issue. I have tried to run factory reset through recovery now that I flashed the new firmware and it still does the same thing, just hangs at the boot screen for a few seconds before going black and then trying again, endlessly.
Has anyone encountered this before? Is it bricked?
Thanks.
The_mamba said:
Hello Everyone,
I have been trying to help my friend with his soft-bricked G3. He wasn't rooted and had never even played with flashing anything, it just stopped booting one day and would display the "LG Life's Good" boot screen for a few seconds before going black and then just repeating this endlessly. I was able to get into recovery and download mode so I used the tot method to flash back to stock after a hard reset just produced the same results.
When I flashed the stock firmware, everything appeared to work fine, it went through the MiniOS bootup and everything, said success, gave me the hard reset status screen so when it finished I pulled the battery as instructed and rebooted but the phone still has the same issue. I have tried to run factory reset through recovery now that I flashed the new firmware and it still does the same thing, just hangs at the boot screen for a few seconds before going black and then trying again, endlessly.
Has anyone encountered this before? Is it bricked?
Thanks.
Click to expand...
Click to collapse
Pretty common prob plug it in to the wall charge see if it boots sometimes it still wont but most of the time it will the battery quality on the g3 is crap they last at most a year with a few exceptions i would first order a battery.

Lock in a Bootloop

Hi:
I've Bricked my TF300T and decided to buy A new Board.
The new board came with that OPEN_epad firmware. So I tried to Force update the WW_epad using the SDcard renaming the ROM to ep201_768_sdupdate.
It seems to update fine. The initial logo Changed (There is no more Ugly eepad logo on the splash screen) and the bootloader changed to WW, but now I'm Stuck on the ASUS logo boot loop.
It boots, the ASUS logo appears stays on with the logo on for about 30 sec, then the tablet restarts itself.
I can Access the recovered page (Using VOL-). When I try to recover, The Green Robot appears as if it was everything OK. It Goes on for some minutes, and the tablet restarts to its boot cycle again.
The tablet is not unlocked, so I guess that the Fastboot/TWRP wouldn't work.
Does anyone know what should I do?
Thanks
Mauricio

Stuck at White Google Screen

Hi,
My Pixel 1 was acting weird so I decided to shut it off and reboot it. Upon rebooting it was stuck on the white Google splash screen. I have tried to do .\adb devices, however, my computer is unable to recognize the device. I just want to flash the factory image on the device again. Does anyone have any ideas?
Thank you for your help!
Also, my recovery doesn't work. If I choose recovery from the boot loader, it just gets stuck on the same white Google splash screen.
Can you check if your Charging connector and battery health is fine?
Seems like a hardware issue if you weren't trying to flash anything
I have the same issue, further more if I fastboot the twrp it's stuck on that splash screen also; @BMWPower06 did you get it sorted somehow ?
After changed the battery. It stuck with the white Google screen. Sometimes went into system,but immediately showed "shutting off" then phone turn off

Categories

Resources