Database Info

Restart loop

Hello
I use a ROM with XT897 CM10.2.1 and SIM MOD CornholioGSM since July 2014, it was working fine.
I flashed the ROM-cm-SNAPSHOT-YOG4PAO23E 12.1-20150901-xt897 (RELEASE) one month ago and the ROM worked well. A week ago, the phone was much slower, I turn off reboot and since it constantly!
I made the following transactions with TWRP:
- Reset factory
- Flash ROM (cm 12.1-20150901-SNAPSHOT-YOG4PAO23E-xt897)
- Flash ROM (BlissPop-v4.0.1-xt897-OFFICIAL-20150917-1514)
- Flash recovery (cm 12.1-20150901-SNAPSHOT-YOG4PAO23E-xt897-recovery.img)
- Flash TWRP
- Flash ROM (cm 12.1-20151007-SNAPSHOT-YOG4PAO339-xt897)
Always the same, I have the boot logo and the logo of the ROM and the phone reboots.
The ROM (CM12.1) has started once and then restart the phone has rebooted repeatedly.
I tried with or without a SIM card.
I do not understand where does the problem, can you help me?

Well not having the phone in front of me, I don't really quite understand the issue myself - however, I would suggest using RSD Lite and one of the FXZ files to flash everything (including recovery) back to stock.
If you still have issues, there is a bigger problem (likely hardware failure).

Hello
sorry if my explanation was not clear.
I added a photo which shows the two steps in the operation of my phone.
Step 1: Start the phone .
Step 2 : boot ROM CM12
The Step 2 lasts 23 seconds then return to Step 1 and Step 2 and Step 1, Step 2 infinitely .
I hope this is understandable .
I read on the forum that used some RSD Lite but as I had not used for the ROM installation, I did not understand why use .
I'm a new user, i can't post picture, I send link by PM, thanks.

I thought my last post made it clear what purpose RSD Lite and the FXZ files are - they restore the phone to stock completely - ROM, recovery, everything will be reset to when it was stock from the factory (granted it may be a newer image than what shipped on the phone, but you get the point).
Again, as I stated previously, if you still have issues after flashing everything stock your issue is likely not software, but hardware.

I searched the forum about RSD Lite. Now I understand its usefulness.
I used RSD Lite to flash the ROM asanti_c_sprint-user-4.1.2-9.8.2Q-122_XT897_FFW-5-6-release-keys-cid9.xml.zip
My phone had with SPRINT .
The flash went well but unfortunately I still have the same problem :
Step 1: unlocked bootloader screen
Step 2: The red M MOTOROLA
Step 1, Step 2 , .....
Is there another test or I can consider it a hardware problem ?
Hardware problem can come out of the MODSIM ? I use a SIM card in the phone for 16 months.

Nicolas.636 said:
I searched the forum about RSD Lite. Now I understand its usefulness.
I used RSD Lite to flash the ROM asanti_c_sprint-user-4.1.2-9.8.2Q-122_XT897_FFW-5-6-release-keys-cid9.xml.zip
My phone had with SPRINT .
The flash went well but unfortunately I still have the same problem :
Step 1: unlocked bootloader screen
Step 2: The red M MOTOROLA
Step 1, Step 2 , .....
Is there another test or I can consider it a hardware problem ?
Hardware problem can come out of the MODSIM ? I use a SIM card in the phone for 16 months.
Click to expand...
Click to collapse
The hardware issue is likely not related to the SIM modification. As to what exactly has failed, I'm not sure... perhaps the NAND or something else memory related.

Aouch aouch...
Thank you for your help.
I think it remains for me to search for a motherboard for photon Q.
Long life in the forum!

Use "borrowed" TWRP recovery image.
Nicolas.636 said:
Hello
I use a ROM with XT897 CM10.2.1 and SIM MOD CornholioGSM since July 2014, it was working fine.
I flashed the ROM-cm-SNAPSHOT-YOG4PAO23E 12.1-20150901-xt897 (RELEASE) one month ago and the ROM worked well. A week ago, the phone was much slower, I turn off reboot and since it constantly!
I made the following transactions with TWRP:
- Reset factory
- Flash ROM (cm 12.1-20150901-SNAPSHOT-YOG4PAO23E-xt897)
- Flash ROM (BlissPop-v4.0.1-xt897-OFFICIAL-20150917-1514)
- Flash recovery (cm 12.1-20150901-SNAPSHOT-YOG4PAO23E-xt897-recovery.img)
- Flash TWRP
- Flash ROM (cm 12.1-20151007-SNAPSHOT-YOG4PAO339-xt897)
Always the same, I have the boot logo and the logo of the ROM and the phone reboots.
The ROM (CM12.1) has started once and then restart the phone has rebooted repeatedly.
I tried with or without a SIM card.
I do not understand where does the problem, can you help me?
Click to expand...
Click to collapse
I had a similar incident a few days ago. I have a hard time stopping myself from pushing the limits. Usually I stop when it's broken. I tried RSD Lite, SDB sideload/ flash, zip install from recovery, fastboot(mine's dead), all with no luck.
Any how, If you have CWM, temporarily change to TWRP. If you already have TWRP it's easier.
XDA has a TWRP recovery image in the forum. Put that in your sdcard (I had to paste it from my computer because my xt897 was soft bricked). Flash from TWRP.
Worked fom me. got my phone back after 1 week of flashing everything and then some.
Good luck.
http://forum.xda-developers.com/showthread.php?t=2295643
http://forum.xda-developers.com/showthread.php?t=2295643&page=2

Hello
thank you for this new information.
I tried it and it worked with the ROM [PQ_ICS-Stock] but only with that one!
I tried the ROM [PQ_JB-421] , several Cyanogen ROM but still the same looping boot problem.
I tried several version of TRWP without success .
I do not understand why my Photon Q only works with this ROM [PQ_ICS-Stock] .
Is still a motherboard problem ?

Hello everyone
I'm going crazy !
As I had not managed to solve my problem, I ordered a mainboard on ebay.
Today I realized the SIMMOD on this new board.
when I restarted phone the same startup problems with the ROM SPRINT !
I unlocked the bootloader .
I installed TWRP 2.7.1.2
I installed CM12.1-20151219 - NIGHTLY - XT897
Still the same problem starting loop.
Someone an idea ?

Nicolas.636 said:
Hello everyone
I'm going crazy !
As I had not managed to solve my problem, I ordered a mainboard on ebay.
Today I realized the SIMMOD on this new board.
when I restarted phone the same startup problems with the ROM SPRINT !
I unlocked the bootloader .
I installed TWRP 2.7.1.2
I installed CM12.1-20151219 - NIGHTLY - XT897
Still the same problem starting loop.
Someone an idea ?
Click to expand...
Click to collapse
If you can't RSD Lite, something is up. Either you are not doing the process correctly, or there is something wrong with the device (still).
Perhaps you were always on ICS and never made the official jump to JB? You say you can RSD Lite to an ICS version, just not a JB version? So 4.0.x works but 4.1.x does not?
Again I'm talking stock. If stock doesn't work, I wouldn't even attempt CM. Start with the basics, then work your way towards the aftermarket.

I agree that if the stock rom does not work after the installation with RSD Lite is that it remains something (software) .
The first motherboard I used 12.1 CM for several months it is that the phone supports android 5.1
I agree that it must abort running a stock ROM before flashing a ROM CM. But the ICS ROM STOCK works!
It is possible that I did not do the process correctly .
What surprises me is that the second board had the same problem with the ROM SPRINT !
I will do other tests.

Nicolas.636 said:
What surprises me is that the second board had the same problem with the ROM SPRINT !
Click to expand...
Click to collapse
This is the part that makes me think you are perhaps missing some step in the process somewhere.
Can you RSD Lite to ICS? Not flash it with TWRP. If that is successful, try to RSD Lite to the latest JB again.

I modified the second motherboard ( mod sim card ) and I started the phone with the ROM SPRINT and I got the boot problem repeatedly.
the common point of two motherboards is that they both have a bad ESN .
I will do other tests.

Nicolas.636 said:
I modified the second motherboard ( mod sim card ) and I started the phone with the ROM SPRINT and I got the boot problem repeatedly.
the common point of two motherboards is that they both have a bad ESN .
I will do other tests.
Click to expand...
Click to collapse
Bad ESN shouldn't prevent booting... it would prevent you from activating the device on the Sprint network, but I would imagine you don't care about that...

arrrghhh said:
it would prevent you from activating the device on the Sprint network, but I would imagine you don't care about that...
Click to expand...
Click to collapse
yes
I used RSD Lite 6.1.6 for flashing the ROM [ 2014-03-09 - TSv2 ] but the process has blocked after the flash.
Here is what I did :
1- run RSD Lite
2- Start the phone in FASTBOOT mode.
3- usb phone connection to PC
4- opening of the ROM [ 2014-03-09 - TSv2 ] and "uncompress and start flashing"
5- flash goes well
6- the phone reboots => Logo M red => telephone reboot => Logo M red => again ....
7- RSD Lite waits for the restart ... [ it waits again, LOL ]
8- I turned off the phone and I unplugged.
9- I turned on the phone who start properly, I arrived at the language selection screen .
The ROM is an android version 4.0.4 , I think you know this ROM .
Why the process with RSD Lite has blocked the phone to reboot ?
That's what I did wrong in the process?

I have read many forum post, I tried several methods but only in the ROM 4.0.4 STOCK work. Flashed with RSD lite or restoration of a backup with TWRP.
I have the bootloop problem using RSD Lite 6.2.4 for ROM 4.1.2 CSPIRE or ROM 4.1.2 SPRINT. No error message of RSD lite. No error message of phone.
I've modified the XML file but it changed nothing.
Same problem using TRWP with custom ROM or restoration of a backup ROM4.1.2 JB.
Same problem using OPEN RECOVERY 209 with custom ROM.
Where is the problem ?
I would use CM12 ROM.

Nicolas.636 said:
I have read many forum post, I tried several methods but only in the ROM 4.0.4 STOCK work. Flashed with RSD lite or restoration of a backup with TWRP.
I have the bootloop problem using RSD Lite 6.2.4 for ROM 4.1.2 CSPIRE or ROM 4.1.2 SPRINT. No error message of RSD lite. No error message of phone.
I've modified the XML file but it changed nothing.
Same problem using TRWP with custom ROM or restoration of a backup ROM4.1.2 JB.
Same problem using OPEN RECOVERY 209 with custom ROM.
Where is the problem ?
I would use CM12 ROM.
Click to expand...
Click to collapse
Without having the device in my hands, it's hard to say for sure. The only difference I can see you are doing differently from me is using a newer version of RSD. I doubt that would be an issue, but may want to try other RSD versions.
In the end, I suppose if 4.0.4 works, use that...

Thank you for you help.
I'll buy a other PHOTON Q on EBAY.
I do other test with the new PHOTON Q.

Hello
I received my new q photon.
It is version 4.1.2
I unlocked the bootloader .
I made a backup with TWRP and OPEN_RECOVERY_209 .
I tried an installation of 3 different ROM but I have an error message !
I do not understand where does the problem ?!
Is this a bad version of TWRP or ROM ?

Touch screen mirrored after custom rom

Hey Guys,
So i have a big problem with my International Galaxy S6 Flat. I tried to update from a custom rom to a stock android 6.0 rom and i failed, so i got stuck in a bootloop. I used a custom rom again so i can get out of the bootloop, but when i tried to set the options in the android installation menu i discovered that my x axis got inverted. So whenever i try to press D i get a K.
I even tried to use the *#2663# code which i read on this forum. but this doesn't work, it doesnt show me the menu to download the firmware. is there another way to download that firmware ?
I flashed new kernels,bootloaders, everything. But i just can't fix it. I'm so desperately atm. I hope you can help me.
Thanks.

Anyway. Flash official ROM from Sammobile and you will be fine.

Need help flashing custom firmware this is kinda greek

A while back i managed to root my Canadian s6 (g920w8) using ping pong root? An app I downloaded from google playstore.. I used root checker and it looks good.. I am rooted.
Do now I'd like to put custom firmware on to get rid of all the crap that comes with this phone.. it is so damn slow its driving me crazy!
Any help is greatly appreciated. Thanks.

1roddy said:
A while back i managed to root my Canadian s6 (g920w8) using ping pong root? An app I downloaded from google playstore.. I used root checker and it looks good.. I am rooted.
Do now I'd like to put custom firmware on to get rid of all the crap that comes with this phone.. it is so damn slow its driving me crazy!
Any help is greatly appreciated. Thanks.
Click to expand...
Click to collapse
Anyone?

There is a few things u can do. Custom ROM and Kernel and recovery. Which I prefer to do. If you just want to remove the bloat download titanium backup

What are you looking for in a Rom? Better ?? Better ?? More memory and performance?
Sent from my SM-G920F using Tapatalk

Well its taken me awhile but ive got time to do some time finally.. i put alliance rom on the phone but when i tried to make a phone call the was no sound on either end of the conversation.. is this a kernal issue?

think this is the best rom arround here alexis rom best battery ad performans
https://forum.xda-developers.com/galaxy-s6/development/alexis-rom-1-0-feel-game-sound-01-04-t3349944

Just tried the Alexis Rom and same thing.. stuck on boot. I reinstalled Alliance hoping for diffrent results.. can text message but no audio during a calls.. ugh! Back to stock again lol..
Provider - Telus
S6 920w8
Stock Android version - 5.0.2
Stock Kernal 3.10.61-4808800
I am using TWRP v2.8.6.0 and am wondering if the version or kernal may have anything to do with getting stuck on boot with almost every ROM i've tried to install..
My procedure when installing a custom ROM is to do a factory reset from TWRP (i dont do data or format because there is no sd card slot to store my rom or backup image), install ROM, clear cache/divik, reboot to system.
Any Ideas??

1roddy said:
Just tried the Alexis Rom and same thing.. stuck on boot. I reinstalled Alliance hoping for diffrent results.. can text message but no audio during a calls.. ugh! Back to stock again lol..
Provider - Telus
S6 920w8
Stock Android version - 5.0.2
Stock Kernal 3.10.61-4808800
I am using TWRP v2.8.6.0 and am wondering if the version or kernal may have anything to do with getting stuck on boot with almost every ROM i've tried to install..
My procedure when installing a custom ROM is to do a factory reset from TWRP (i dont do data or format because there is no sd card slot to store my rom or backup image), install ROM, clear cache/divik, reboot to system.
Any Ideas??
Click to expand...
Click to collapse
Reflash any ROM giving you sound issues and then flash either hacker kernel or arter kernel as they are the only two compatible as far as I know. Once you have flashed arter kernel and then rebooted your phone. Reboot your phone back into recovery once more and then flash this https://drive.google.com/file/d/0B4Gyz91x5k7gc2NBS2N5TFQwY0k/view?usp=drivesdk it is the call audio fix for our devices (925T / 925W8)
(920T / 920W8)
Just make sure you DO NOT FLASH THIS BEFORE DEVICE REBOOT AFTER FLASHING CUSTOM KERNEL. Or you will get into a bootloop and say this doesn't work. (Your system needs to build with kernel settings first)
Here's a step by step I hope helps.
1. Flash custom ROM
2. Flash custom kernel
3. REBOOT
4. Set up ROM.
5. Reboot into recovery.
6. Flash call fix.
7. REBOOT
8. Profit.
Hope it helps you and welcome to making your phone truly yours.
---------- Post added at 01:46 PM ---------- Previous post was at 01:39 PM ----------
Another reason why you are not booting is because you are on 5.0.1
You will have to update the bootloader to MM 6.0 first in order to use 6.0 custom ROMs this can be achieved by flashing any of our latest Canadian firmwares. (Does not matter what company if you are changing FW after.)
ALSO you can use the advanced wipe settings on TWRP to wipe everything but 'internal storage' that is where the ROM is downloaded.

I had alot of issues installing custom ROM's.. so i decided to upgrade and install OEM marshmallow 6.0.1 then re-root my phone. It worked.. I'm running Griffin ROM atm but will play around with other roms now that i have a good idea of where i went wrong.

1roddy said:
I had alot of issues installing custom ROM's.. so i decided to upgrade and install OEM marshmallow 6.0.1 then re-root my phone. It worked.. I'm running Griffin ROM atm but will play around with other roms now that i have a good idea of where i went wrong.
Click to expand...
Click to collapse
Griffin is great, I'm also using the latest version.

christopherrrg said:
Griffin is great, I'm also using the latest version.
Click to expand...
Click to collapse
Do you have any trouble sending MMS? Mine seem to hang until they fail..

1roddy said:
Do you have any trouble sending MMS? Mine seem to hang until they fail..
Click to expand...
Click to collapse
I do not. However I always have mobile data running, maybe toggle yours and see if it sends. Some of the new ROMS have incorporated a tweak that auto toggles data to recieve pictures and send them. Griffin AFAIK does not have this tweak yet so when sending MMS you need to manually turn mobile data on and off.

christopherrrg said:
I do not. However I always have mobile data running, maybe toggle yours and see if it sends. Some of the new ROMS have incorporated a tweak that auto toggles data to recieve pictures and send them. Griffin AFAIK does not have this tweak yet so when sending MMS you need to manually turn mobile data on and off.
Click to expand...
Click to collapse
I did another wipe and clean install.. it took care of the problem.. looking for a new kernal now so i can get private mode working.

1roddy said:
I did another wipe and clean install.. it took care of the problem.. looking for a new kernal now so i can get private mode working.
Click to expand...
Click to collapse
Private mode?
Like in the browser? Or in the actual software?
I've never used it before so I've never hunted it down.
(Asking because I shall)

christopherrrg said:
Private mode?
Like in the browser? Or in the actual software?
I've never used it before so I've never hunted it down.
(Asking because I shall)
Click to expand...
Click to collapse
Private mode in setings---> privacy---> private mode. I read somewhere a kernal will fix it.. i'll play around with that later!

S902l Root straight talk s5

This is how to root the straight talk s5 s902l
Seen a lot of people asking how to do so
First you need a computer and Odin on it.
Second download KLTE TWRP
And download supersu and save to your ex.sdcard
Then shut off your phone
Hold power+home+volume down
Then press up to get into download mode
Make sure auto reboot is off in Odin
Flash twrp in Odin
Unplug the device and take out the battery for 10 sec
Replace the battery and boot into your recovery
Power+home+volume up
Flash the supersu zip
There now you have rooted the straight talk s5 s902l
****ROMS****
You can flash ROMS only roms that start with g900
You may also need a patch to get the rom working so you can add your apns

So the low down open Odin uncheck auto reboot
Connect phone when in download mode
Flash twrp
Disconnect phone take out battery
Boot into twrp flash supersu
Reboot success
Supersu
https://drive.google.com/file/d/0B36lT6WBZ6hkcVZNTHdFVE91VTQ/view?usp=docslist_api
Flash this patch when you download any rom starting in g900
https://drive.google.com/file/d/0B36lT6WBZ6hkOFlpbzR1MFEzWDg/view?usp=docslist_api
TWRP for klte flash on Odin
https://dl.twrp.me/klte/

The link for the patch didn't work. I like your post, I'm looking for marshmallow roms to flash. Got any suggestions? I have an Sm-s902l.

Let me fix the link
I'm running a rom but it's 5.1.1
But it's a galaxy s6 edge plus rom but looks like the MM
I tired to flash cm for our phones and it killed my Sim I tried a second and it actually deactivated the Sim there is a rom but let me get the name for ya I haven't tried it yet though just letting u no

Here is the rom that I'm running on my s902l and I love it it's a galaxy edge plus rom and has EVERY Feature of the edge no gapps need to be flashed and it's very clean and very stable
I'll get the other one to you also and new link to the patch you will need the patch to the rom in this link
Flash rom don't wipe catch/devilk
Install patch then wipe catch/Devilk
Straight talk apn for Verizon now are
TRACFONE.VZWENTP
http://bryllechin-android.blogspot.com/2015/11/popwiz-telstra-v10-note-5-port-for-g900f.html?m=1

Patch new link (mega)
https://mega.nz/#!StUjzTKZ!48GPos3x-iEeiMdwyw4KVisNeLTiwBUK_gAXC5Ne4E0

Thanks for the link. Do you know all the prefixes of the roms we can install with the patch? I know we can run g903f roms. You sale all g900 roms... does that mean any rom for a phone starting with g9__?

As long as the rom starts with (g900) you should be safe just flash the patch

If you take the battery out of the back of the phone
On model it will say s902l
By the FCCI first five it says g900v witch is a klte and that's Verizon
So all together this phone s902l is a dev edition

Good to know!

No problem

ddjr just help share this post a lot of people ask all over the Web
King root
Towel root ect can't do this phone
Just help spread the word that it is on xda a lot of people also don't no how to work the forums I've heard

Will do

I'm not having any luck getting miui 7 to work. Any ideas?

ddjr said:
I'm not having any luck getting miui 7 to work. Any ideas?
Click to expand...
Click to collapse
Find a MIUI for galaxy s5 series G9007 then flash the patch
See if that will work

This should work for your phone remember always make a back up
http://forum.xda-developers.com/galaxy-s5/development/rom-miui-v5-g900f-ry09iu-4-8-11-t2946540

I've tried that one. I don't get far- no 4g or lte, only 3g. And I can't receive texts. It's close but no cigar. And I'll be dipped if I can find a miui for the g900f... it's nonexistent. No biggie I'll just wait for the next great rom for our phone

ddjr said:
I've tried that one. I don't get far- no 4g or lte, only 3g. And I can't receive texts. It's close but no cigar. And I'll be dipped if I can find a miui for the g900f... it's nonexistent. No biggie I'll just wait for the next great rom for our phone
Click to expand...
Click to collapse
There are galaxy s6 edge ports for the g900f I no that works I had that one on my phone
I'm currently running just the stock 5.0 for the g900f from ax

Dmoz16 said:
There are galaxy s6 edge ports for the g900f I no that works I had that one on my phone
I'm currently running just the stock 5.0 for the g900f from ax
Click to expand...
Click to collapse
Make sure you put the apns in all caps no lower case
Again straight talk apn that works for our phone is
TRACFONE.VZWENTP

But I have flashed a lot of G900F model of roms then the patch then the apns listed above everything been working perfect for me
I can't say miui I'm not a big fan of the look of it but I'll put some links to some roms that work
They do not need any gapps just give me a bit

WiFi is not working...

Hi,
The first is to apologize for the language used, and the length of the text. I am from Spain and my level of English is low, so as it was a fairly long post I used Google Translator and I know that makes it very literal translation ...
I write this post to see if anyone can help me or give some idea ... I explain the problem.
I own for some time ago the Tablet, Samsung Galaxy Note 10.1 (2012) . He has always liked to try new ROMs, so far without much trouble, but .... I tempted fate a lot.
At some point, after changing the Recovery and ROM, to test Marshmallow, the WiFi stopped working, which is a problem in a device of this type, you lose a lot of functionality.
I have tried many ROMS, about 10, and none of them work properly. It is true that some seems, makes the attempt, working. But it does not work.
I have also tried different Recoveries (CWRM, TWRP, Stock, HigOnAndroid, ....), and I have not gotten the Tablet WiFi work.
With all these tests, entering DOWNLOAD mode, it indicates that the device model is the Note 10.1 GT-N8000, the model without WiFi. And when you install a ROM, and go to Settings/Info, the system said that the Tablet is the GT-N8000 model.
This has led me to perform multiple tests:
A- Flash several ROMS by Recovey, usually used the TWRP.
B- Change Recovey installed by Odin 3.10
C- The last thing I have tried, is back to the original ROM and Recovery by Odin 3.10
All these attempts, multiple, have thrown me the same result. The WiFi does not work, and continues to indicate that is the model GT-N8000
The questions are:
1 - Is it normal, even the GT-N8013 model DOWNLOAD mode appears as the GT-8000?
2- Is there any way to get back to its original state, GT-N8013, with WiFi?
3- What Recovery would be most appropriate? (I once used the TWRP)
4- What ROM for this Tablet is the most appropriate? (This question is very personal, I've always liked Omega Rom)

What model do you have .

Samsung Galaxy Note (2012) Gt-N8013

peirof said:
Samsung Galaxy Note (2012) Gt-N8013
Click to expand...
Click to collapse
Hi, WiFi isn't working because you probabily stay with a older bootloader but with 6.0. When you flashed the MM rom, your tablet at which version of android was? Maybe i think 4.4.x if WiFi doesn't start. You need to update the bootloader into marshmallow or try look on the thread where you found the rom if there are some modem updates. By the way, if you want to get the stock firmware and install it on your tab, first go in sammobile site and download the firmware ( pay attention to version 4g / without 4g ) and then put your device in download mode->connect to odin-> on "PDA" load the firmware you downloaded -> start -> wait 10/12 mimutes and you will have the tablet as you bought for the first time.
And check if the rom is right for your device( because when kernel is different if the device start it can have some issues like WiFi )
Hope i help you
If i helped you, remember to click the thanks button!

gosha98_ said:
Hi, WiFi isn't working because you probabily stay with a older bootloader but with 6.0. When you flashed the MM rom, your tablet at which version of android was? Maybe i think 4.4.x if WiFi doesn't start. You need to update the bootloader into marshmallow or try look on the thread where you found the rom if there are some modem updates. By the way, if you want to get the stock firmware and install it on your tab, first go in sammobile site and download the firmware ( pay attention to version 4g / without 4g ) and then put your device in download mode->connect to odin-> on "PDA" load the firmware you downloaded -> start -> wait 10/12 mimutes and you will have the tablet as you bought for the first time.
And check if the rom is right for your device( because when kernel is different if the device start it can have some issues like WiFi )
Hope i help you
If i helped you, remember to click the thanks button!
Click to expand...
Click to collapse
Hi,
Thanks, sorry for delay, I can solve the isue with another Rom