Related
Are there any curved/wet install screen protectors that will fit round the curved edges of the S6 or is a glass one the way forward?
I am clumsy and outdoors lots so would want some proection and it seems a lot of the plastic protectors only just about cover the screen.
I was very satisfied with the Spigen non-glass screen protector. It covered almost all of the screen, which surprised me. I only took it off because I prefer glass protectors.
Spigen screen protectors leave gaps around the border. Not as much as glass sp. This is to accommodate "case friendly" design.
HKSpeed said:
I was very satisfied with the Spigen non-glass screen protector. It covered almost all of the screen, which surprised me. I only took it off because I prefer glass protectors.
Click to expand...
Click to collapse
Interesting! I thought I read it only just covered the screen? Does it overlap slightly? Maybe it was earlier version!
JayX2A said:
Interesting! I thought I read it only just covered the screen? Does it overlap slightly? Maybe it was earlier version!
Click to expand...
Click to collapse
No screen protector I know of covers more than the screen. Are you using a case? If yes, which one?
HKSpeed said:
No screen protector I know of covers more than the screen. Are you using a case? If yes, which one?
Click to expand...
Click to collapse
Not got the phone yet - was pre ordering bits! I don't mean the whole front of the phone. On the spigen website it shows the protector being slightly wider than the display, but review I read elsewhere seem to have it cut quite narrow and it barely covers the active part of the screen.
This is the Spigen plastic screen protector I ordered below. I always use a case and it covers most of the screen. There's a tiny gap, but I wasn't bothered by it.
http://www.amazon.com/gp/product/B00QU4N0EI
A case option is the Spigen Ultra Hybrid FX case. Its the $17.99 option in the link below. It covers the entire phone (front, back, edges). Then you don't need a screen protector.
http://www.amazon.com/gp/product/B00QU4PN84
Reviews and photos of it: http://www.amazon.com/gp/customer-reviews/RT1Z3ENHAIQ8Z and http://www.amazon.com/gp/review/RDXA8F1JMNCI4
Below is a review of the case for an iPhone 6. It's in Japanese, but you get the idea. There's no S6 video review available.
Despite my comments in this thread, I'm not a Spigen fanboy LOL. I no longer use the Spigen screen protector (I have a no-name glass now) and I'm swapping my Spigen case for a Ringke Fusion.
HKSpeed said:
This is the Spigen plastic screen protector I ordered below. I always use a case and it covers most of the screen. There's a tiny gap, but I wasn't bothered by it.
http://www.amazon.com/gp/product/B00QU4N0EI
A case option is the Spigen Ultra Hybrid FX case. Its the $17.99 option in the link below. It covers the entire phone (front, back, edges). Then you don't need a screen protector.
http://www.amazon.com/gp/product/B00QU4PN84
Reviews and photos of it: http://www.amazon.com/gp/customer-reviews/RT1Z3ENHAIQ8Z and http://www.amazon.com/gp/review/RDXA8F1JMNCI4
Below is a review of the case for an iPhone 6. It's in Japanese, but you get the idea. There's no S6 video review available.
Despite my comments in this thread, I'm not a Spigen fanboy LOL. I no longer use the Spigen screen protector (I have a no-name glass now) and I'm swapping my Spigen case for a Ringke Fusion.
Click to expand...
Click to collapse
Have the Fusion on my Nexus - pretty good but teh back is coming away from the sides now. Like the look of the Rinke slim though.
Got some Spigen ones, they are pretty close to the size of the screen. Have to be so careful to line it up properly! Shame they didnt make it that fraction bigger, but I guess that was not possible due to the screen curve.
Ordered spiegen ones too, from amazon, 2 protectors wtih shipping costed 16.70€ but i have always dreamed of getting rid of that thick and heavy tempered protector.... they really do add weight and thickness to phone, especially if you decide to put front and back tempered protectors
Duzzy5 said:
Ordered spiegen ones too, from amazon, 2 protectors wtih shipping costed 16.70€ but i have always dreamed of getting rid of that thick and heavy tempered protector.... they really do add weight and thickness to phone, especially if you decide to put front and back tempered protectors
Click to expand...
Click to collapse
I was tryiing to find a 0.2mm glass one as the thread on here has that as the best one - but they donn't ship to UK
They're hard to find, I've seen a few on ebay.com but there are some glass protectors that will cover almost all of the phone. They're the ones that go over the buttons with a pass-through for the fingerprint sensor/home button. They have an entirely identical full front look. Like this one, but not edge of course, they make them for flat S6s too but the flat ones being the ones that are hard to find: http://www.ebay.com/itm/Samsung-Gal...hash=item4d3e1f582c:m:mF-rpmie8VK2iab6MR9K5EQ
benjmiester said:
They're hard to find, I've seen a few on ebay.com but there are some glass protectors that will cover almost all of the phone. They're the ones that go over the buttons with a pass-through for the fingerprint sensor/home button. They have an entirely identical full front look. Like this one, but not edge of course, they make them for flat S6s too but the flat ones being the ones that are hard to find: http://www.ebay.com/itm/Samsung-Gal...hash=item4d3e1f582c:m:mF-rpmie8VK2iab6MR9K5EQ
Click to expand...
Click to collapse
Ordered a couple of super cheap 0.26mm ones that I found online.
https://www.replacebase.co.uk/samsu...or-0-2mm-ultra-clear-with-oleophobic-coating/
Arrived yesterday and look ok - will see how they go on and if there are any halo issues.
JayX2A said:
I was tryiing to find a 0.2mm glass one as the thread on here has that as the best one - but they donn't ship to UK
Click to expand...
Click to collapse
I have a SUPER thin tempered glass screen protector for the front and back of my s6. On the back it is quite large so it has the halo but on the front it is cut so it just about covers the actual display bit, so there is no halo on the front. It covers the samsung logo at the top and the capacitive buttons at the bottom like any other screen protector. Both costs me £2.49 on eBay UK. After using a much thicker tempered glass screen protector on my s3 I would say that the thicker ones feel as if they would offer better drop protection.
These are German made hybrid screen protectors made of anti-shock plastic substrate and tempered glass. Have used them on a few other devices and they are excellent. Slightly pricey as they are German made but definitely worth checking out. Just ordered mine today. They also include a protector for the back in the package.
http://www.ebay.com/itm/332032300020?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
As of now, I've ordered a few screen protectors, the full coverage ones found on ebay, which seems to affect touch functionality and the cheaper standard tempered glass protectors.
Waiting for the FX Glass protectors to arrive. Will update when I receive it.
Do let me know when anyone already has these.
I ordered a "full cover" one with the black border. (https://www.amazon.com/gp/product/B01MQLV04B)
I does not look promising. Reviews say its only sticky around the edges, so sensitivity is an issue.
I can't understand why there are no standard style protectors available.
That hybrid one looks closest to them, and seems promising.
THINK this is just another ordinary "not full coverage" glass.
Constrabus said:
I ordered a "full cover" one with the black border. (https://www.amazon.com/gp/product/B01MQLV04B)
I does not look promising. Reviews say its only sticky around the edges, so sensitivity is an issue.
I can't understand why there are no standard style protectors available.
That hybrid one looks closest to them, and seems promising.
Click to expand...
Click to collapse
The hybrid as the name suggests is a hybrid between plastic and glass. This makes the film as flexible as a plastic film but the layer which you touch is glass, hence very high resistance to scratches. They claim 8H and I have bought their protector for another device earlier and I can say from experience that its great! And its German made! And apparently they have very positive reviews everywhere. I just happened to know about them recently, maybe because I used to buy those cheap 3-4dollar tempered glass films from China which would do the job and were usually as good as the more expensive ones for "flat" displays.
I still haven't received any of the screen protectors I've ordered for the mix. But from what users are saying on this forum, the full-coverage version with the black borders are pretty much unusable due to poor touch. And the regular tempered glass ones cover just the viewing area. But I guess this is already a very well known fact that its hard to find full coverage tempered glass protectors for 2.5D curved displays. Almost every screen protector which promise full coverage only has adhesives around those borders and the glass barely touches the display which causes a significant loss in touch functionality.
Even the Atfolix protector only covers the viewing area. But what makes them different from the cheap regular tempered glass is resistance to shock. Most regular tempered glass protectors crack during shock. But these being hybrids are more resistant to shocks.
satishp said:
Even the Atfolix protector only covers the viewing area.
Click to expand...
Click to collapse
What does that mean?
It doesn't cover the bottom camera bezel?
ChodTheWacko said:
What does that mean?
It doesn't cover the bottom camera bezel?
Click to expand...
Click to collapse
As far as what I've read, it covers the bezel around the camera. But the protector is cut slightly smaller than the display glass meaning its not a full-coverage type protector. This is most likely done to ensure that the protector adheres properly to the 2.5D display glass.
So it does cover the bezel area but doesn't reach the rounded edges of the display. Hope this helps.
I have received a case and screen protector today and have uploaded pictures here. Have more cases coming in and will update as I receive them.
Hope you can also help by posting photos of the case and screen protector you are using in that thread. It will help other buyers.
Cheers!
@satishp Any updates with that screen cover?
Constrabus said:
@satishp Any updates with that screen cover?
Click to expand...
Click to collapse
Haven't received them yet. They shipped it via a slow shipping service called PostNL.
I can recommend this full coverage protector I got from ebay though.
No newton rings, no issues with touch and its a perfect fit.
Ebay Item: 172369729447
This is based on my own experience with the item. As long as you perfectly install the protector, you shouldn't have any issues at all.
I have already posted photos here with the protector applied. Check it out.
I wonder why isn't there a full screen glass cover for the mix. The screen is curve at the edges but manufacturers should be able to do this right?
jaime4272 said:
I wonder why isn't there a full screen glass cover for the mix. The screen is curve at the edges but manufacturers should be able to do this right?
Click to expand...
Click to collapse
There are full coverage protectors like the one I've recommended above. If you're referring to fully transparent full coverage protectors, I guess they dont make them because it shows those air gaps around the borders when applied to a 2.5D curved display like the one on the Mix. The ones with the black borders dont show this and are preferred by most users. Its better than seeing those ugly air gaps which arent uniform.
I did try that one you are referring to but I had to return it because of the rainbow effect and touch issues. ho well.
jaime4272 said:
I did try that one you are referring to but I had to return it because of the rainbow effect and touch issues. ho well.
Click to expand...
Click to collapse
I guess there are a few variants of the screen protector coming from different factories. This is why I specifically mentioned the Ebay Item ID. I do not get any issues with this one. I ordered two of them. Had to dispose off one as I noticed some stubborn dust stuck under the first one.
Applied the second one now.
I can confirm that I don't see any newton rings (rainbow effects), no issues with touch functionality either. I didn't experience these issues with the first one either.
Ok. Good to hear, I would like to have an all clear instead of having black adages and bottom chin. If one exist.
Try
Nexus 5
jaime4272 said:
Ok. Good to hear, I would like to have an all clear instead of having black adages and bottom chin. If one exist.
Click to expand...
Click to collapse
Unfortunately a transparent full-coverage one doesn't exist due to the edge-less design. If you have used transparent tempered glass screen protectors on devices with 2.5D curved screens before, you may have noticed that the corners don't adhere to the screen causing a border of air to form around the protector.
This is the reason why full-coverage protectors have colored borders around the viewing area. It hides those ugly air gaps around the display.
There are transparent protectors available. The Atfolix Glass protector is a transparent one, higher quality than the regular Chinese tempered glass protectors. But it doesn't cover the whole display like all the other transparent protectors available for the Mix.
I understand that, but what I was saying is that they could make them without the black edges and leave it all crear.
Xiaomi's original tempered glass
I bought Xiaomi original tempered glass but now in the middle of my screen I have like an oily colored stain. Of course it's not oil but I think there is air between my screen and the tempered glass. Doesn't the tempered glass contain holes for the sound? I hope it's not my screen. But when I turn of my device I can see it too so I really think it's the tempered glass. Need a new one! Ordered one so we'll see.
i bought this one FX-Hybrid-Glass Panzerglasfolie Xiaomi Mi Mix Glasfolie Panzerglas from
http://www.ebay.com/itm/332032300020?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
and it looks better than any previous one i have bought before.
jaime4272 said:
i bought this one FX-Hybrid-Glass Panzerglasfolie Xiaomi Mi Mix Glasfolie Panzerglas from
http://www.ebay.com/itm/332032300020?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
and it looks better than any previous one i have bought before.
Click to expand...
Click to collapse
Is it covering the active part of the display completely? If not you normally have a halo effect on the left and right side of the protector. With the Mix maybe on the top side too. If the product pictures are real it is not. But well, if it is i'll order one too. The fullscreen ones i've tested are crap.
---------- Post added at 10:09 AM ---------- Previous post was at 10:04 AM ----------
liobeir said:
I bought Xiaomi original tempered glass but now in the middle of my screen I have like an oily colored stain. Of course it's not oil but I think there is air between my screen and the tempered glass. Doesn't the tempered glass contain holes for the sound? I hope it's not my screen. But when I turn of my device I can see it too so I really think it's the tempered glass. Need a new one! Ordered one so we'll see.
Click to expand...
Click to collapse
I've tried the Raugee and the Imak protector. Both show the same effect. The problem is that these fullscreen protectors only stick on the edges. The air layer between the display glass and the protector causes this oily rainbow effect. Depending on the phones and the surroundings temperature it's more or less visible.
jaime4272 said:
i bought this one FX-Hybrid-Glass Panzerglasfolie Xiaomi Mi Mix Glasfolie Panzerglas from
http://www.ebay.com/itm/332032300020?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
and it looks better than any previous one i have bought before.
Click to expand...
Click to collapse
Can you post pictures of this one please. My order got cancelled due to some processing delay. If this is good, I'll place another order.
May I know which tempered glass screen protector I should order from eBay or Amazon.ca which will attract less finger print?
There are not any really good ones because of the curved screen. You either are going to have it peel a bit on the edges or the screen protector will be cut well short of the sides.
I went with this film one and although I wanted glass I am happy with it
https://www.amazon.com/gp/product/B01M700TQ2/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
there all terrible tried 5 now not one any good, the film ones are no good for me as there offer no protection from impact..
I'm happy with this.
I use this. http://www.ebay.com/itm/25266402845...49&var=551590088571&ssPageName=STRK:MEBIDX:IT
Ready to have this and sit the dimensions well. https://fr.aliexpress.com/item/Pzoz...663571.html?shortkey=UfIVFz2q&addresstype=600
gomcse2002 said:
May I know which tempered glass screen protector I should order from eBay or Amazon.ca which will attract less finger print?
Click to expand...
Click to collapse
This is the one I am using after trying several different tempered glass. It's not edge to edge but since it so thin you can barely see the gap. The best part is no halo effect and it's super responsive.
http://www.protectionfilms24.com/ar...en-protector-clear-huawei-mate-9-2729860.html
Here's a review on youtube
https://www.youtube.com/watch?v=zEpMWkIPqyQ
I'm on my second Brotect. Didn't like them the first time around but they have grown on me. I don't think they'd offer as much impact protection as a thicker tg, but they also fit and look better on a 2.5d screen.
Sent from my MHA-L29 using Tapatalk
I went with the Supershieldz from Amazon and it has been good for me, works with 3 different case I have tried.
https://www.amazon.com/gp/product/B01N6BCXDJ/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
Amazon Mr Shield For Huawei Mate 9
I have the newest Nillkin and it is a bit oversized, which leaves a halo around the edges. Not bad when the screen is on, but very noticeable when the screen is dark. That being said, it did save my bacon this morning. I dropped my phone from about 4 foot up(bobbled the catch) straight onto concrete... it landed on a corner and fell flat on the face. The screen protector did it's job and saved the display. The protector now has a very nice diagonal crack running the entire width, but it still works. Unfortunately, it means I need to buy a new one as Nillkin only provides one in the package. So it is off to Amazon to order my old standby, the SuperShieldz
Okiera29 said:
I have the newest Nillkin and it is a bit oversized, which leaves a halo around the edges. Not bad when the screen is on, but very noticeable when the screen is dark. That being said, it did save my bacon this morning. I dropped my phone from about 4 foot up(bobbled the catch) straight onto concrete... it landed on a corner and fell flat on the face. The screen protector did it's job and saved the display. The protector now has a very nice diagonal crack running the entire width, but it still works. Unfortunately, it means I need to buy a new one as Nillkin only provides one in the package. So it is off to Amazon to order my old standby, the SuperShieldz
Click to expand...
Click to collapse
Get Mr Shield on amazon, include 2 and if you broke one only email with picture and they sent replacement free, it happen to me on Galaxy Tab A and Nexbit Robin and get both free...
Try full covdr
I installed a Cafele glass screen protector the first day i got my Mate 9 and didn't had to replace it in a year.
It's a bit oversized, so it covers the edges, and comes with a liquid that fills the ait bubbles.
You don't really see them anymore.
None of the tempered glass I bought fits to the mate 9. So I took " hydrogel" screen protector on aliexpress and it fits perfect !
Sorry for bad english ≥≤
tenson22000 said:
None of the tempered glass I bought fits to the mate 9. So I took " hydrogel" screen protector on aliexpress and it fits perfect !
Sorry for bad english ≥≤
Click to expand...
Click to collapse
This
Sent from my MHA-L29 using Tapatalk
I found this one, wondering if anyone tried this one yet....?
[3 PACK] Essential Phone Screen Protector, LK [Tempered Glass] with Lifetime Replacement Warranty https://www.amazon.com/dp/B072NB1NJY/ref=cm_sw_r_fm_apa_ZweTzbDZHA8MB
Yes. It's not good.
808phoneaddict said:
I found this one, wondering if anyone tried this one yet....?
[3 PACK] Essential Phone Screen Protector, LK [Tempered Glass] with Lifetime Replacement Warranty https://www.amazon.com/dp/B072NB1NJY/ref=cm_sw_r_fm_apa_ZweTzbDZHA8MB
Click to expand...
Click to collapse
Right now all the screen protectors are bad.
Until they come up with a new and improved version, assume all are bad.
I've tried two on Amazon and got the exact same results.
I asked for and received a refund both times.
tech_head said:
Right now all the screen protectors are bad.
Until they come up with a new and improved version, assume all are bad.
I've tried two on Amazon and got the exact same results.
I asked for and received a refund both times.
Click to expand...
Click to collapse
Which 2 brands have you tried?
808phoneaddict said:
Which 2 brands have you tried?
Click to expand...
Click to collapse
This company says they only cover the flat part of the screen. Lie.
https://smile.amazon.com/gp/product/B074M7S4HR/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
This one just claims a perfect fit.
https://smile.amazon.com/gp/product/B0747911H7/ref=oh_aui_detailpage_o02_s02?ie=UTF8&psc=1
Neither fits.
tech_head said:
This company says they only cover the flat part of the screen. Lie.
https://smile.amazon.com/gp/product/B074M7S4HR/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
This one just claims a perfect fit.
https://smile.amazon.com/gp/product/B0747911H7/ref=oh_aui_detailpage_o02_s02?ie=UTF8&psc=1
Neither fits.
Click to expand...
Click to collapse
Thank you for pointing it out. I (and other probably) appreciate the info. Ill definitely spread the word if I find one that works, or doesn't!
I returned these based on the reviews. No phone yet so didnt test myself, but why wait to be even further disappointed
https://www.amazon.com/gp/product/B071XHTLGR/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B073ZBNLMB/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
That's the only decent screen protector that fits right now. There's also a matte finish one. It's not tempered glass, but you get 8. The fit is much better than all of the tempered glass ones on Amazon. It's not 100% perfect as tiny bit of the edge don't stick but you won't notice from the distance unlike the current tempered glass.
heyitsrj said:
https://www.amazon.com/gp/product/B073ZBNLMB/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
That's the only decent screen protector that fits right now. There's also a matte finish one. It's not tempered glass, but you get 8. The fit is much better than all of the tempered glass ones on Amazon. It's not 100% perfect as tiny bit of the edge don't stick but you won't notice from the distance unlike the current tempered glass.
Click to expand...
Click to collapse
If any part of a screen protector doesn't stick then all manner of stuff will get stuck in between. For those w/ colored borders, that's not much of an issue but completely clear ones will eventually show all the dust and stuff on it.
I'm waiting this protectors "http://www.skinomi.com/essential-ph-1.html"
Only avalaible the 10/05/2017
i'll buy this model "http://www.skinomi.com/sk31879-ph-1-phone-skin-protector.html"
benshoes said:
I'm waiting this protectors "http://www.skinomi.com/essential-ph-1.html"
Only avalaible the 10/05/2017
i'll buy this model "http://www.skinomi.com/sk31879-ph-1-phone-skin-protector.html"
Click to expand...
Click to collapse
I don't like the feel of this stuff on the screen. It doesn't feel smooth.
It's 3M Urethane film. I have it on the front of my cars.
Ok don't try this one
Definite halo on this one
[3 PACK] Essential Phone Screen Protector, LK [Tempered Glass] with Lifetime Replacement Warranty https://www.amazon.com/dp/B072NB1NJY/ref=cm_sw_r_cp_apa_fHJUzb4M12ED5
The essential screen isn't flat. I don't see a viable glass protector coming. It'd have to be super thin with a really strong adhesive to make it stick to the sides.
foodplz said:
The essential screen isn't flat. I don't see a viable glass protector coming. It'd have to be super thin with a really strong adhesive to make it stick to the sides.
Click to expand...
Click to collapse
Actually much like the iPhone, it's flat until you get to the edge.
If the current round of protectors was 2mm smaller they would fit.
But for me, it doesn't matter.
I'm returning the phone.
There's still a thin bezel on the side that can handle adhesive on it so if they release one with black borders, I'd get it as the black borders won't show the halo effect even if it's not completely stuck on the outer edges. That's what I have on my iPhones. The display area is glass while the borders are plastic so they flex more.
gqukyo said:
There's still a thin bezel on the side that can handle adhesive on it so if they release one with black borders, I'd get it as the black borders won't show the halo effect even if it's not completely stuck on the outer edges. That's what I have on my iPhones. The display area is glass while the borders are plastic so they flex more.
Click to expand...
Click to collapse
Jus wait for the accessories to start coming out. Sounds like essential is open to 3rd parties making cases and screen protectors... So just got to hold on...this is what it sounded like from the reddit AMA
I have a Sopi 3M matte skin on the back and it helps with the grip a little but not by much... definitely helps w/ the fingerprints though... lol since it's matte, there can be visible smudges from time to time depending on how dirty/sweaty your paws are... I did read the AMA and they should've worked w/ case manufacturers long before release. I understand they want to keep it close to their vest until release (as to not tip off the competition) but they didn't ship the phone until much later than they said they would so in that time they could've sent out the outside schematics/dimensions to case manufacturers. No excuse!
The situation is the same for any devices that have curved edges. I'm not sure why companies just don't apply adhesive to the whole screen protector. A solution is using UV glue on a glass screen protector that isn't fully covered with adhesive. I've used the Whitedome on my Galaxy S8+ and it works really well. You should be able to buy the UV glue and UV lamp from Amazon and apply it to any glass screen protector. https://www.youtube.com/watch?v=8KZmF8uQESI
Which one do you recommend for the S10e? Right now I'm still using the default protector which was applied by Samsung, but I don't really like it.
i ordered one on ebay but i have a feeling it's flat not edge to edge full cover for 10e. They use generic photoshopped stock photo for all 3 models and claim it's curved. I think 10e has 2.5D edge. Not completely flat. I'm also using the garbage thin film they included. For $800 scumsung could include high quality glass and case. I also ordered glass for rear cameras. Never seen or used one before. Not sure what to expect.
tried ESR tempered glass and MP mall tempered glass from amazon
both do not stick on side, ESR is off by like 0.75 mm because of 2.5D curve of glass, it does not stick on side. so dont waste your money on these two, i am still looking for one may be just a bit smaller than ESR.
temporarily ordering a film protector till i find a tempered glass which fits right.
I'm using the PureGear HD Clear Tempered Glass Screen Protector https://www.amazon.com/dp/B07P7S174H/ref=cm_sw_r_cp_apa_i_byaHCbZY5Q1N0
It only has adhesive on the edges so there is no bubbles. It is case friendly and is a decent alternative to the whitedome which remains the superior choice for the 2.5D screens.
It only has adhesive on the edges so there is no bubbles. It is case friendly and is a decent alternative to the whitedome which remains the superior choice for the 2.5D screens.
Click to expand...
Click to collapse
how is touch sensitivity and does is create rainbow effect like some tempered glass with adhesive on side do?
Keep in mind aftermarket screen protecters (especially glass ones) will have problems with the fingerprint reader.
Im using the samsung one for now until some testing and revising is done
No rainbow effect and if you increase touch sensitivity in the settings it works great. I have no real complaints.
which non-glass protector do you guys recommend?
destz0r said:
which non-glass protector do you guys recommend?
Click to expand...
Click to collapse
I am interested as well, tried both ESR screen protectors and they were both too small for the screen. doesn't look like there is a clear favorite right now
DSX2 said:
Keep in mind aftermarket screen protecters (especially glass ones) will have problems with the fingerprint reader.
Im using the samsung one for now until some testing and revising is done
Click to expand...
Click to collapse
That's only for bigger models. S10E finger scanner is on the side.
Sent from my SM-G970U1 using Tapatalk
Why is there a lip or Ridge around perimeter of screen of galaxy s10e
Does anybody know why there is a lip or Ridge around the edges of Galaxy S10e screen it's almost looks like a screen protector has been applied from the factory
willdogg78 said:
Does anybody know why there is a lip or Ridge around the edges of Galaxy S10e screen it's almost looks like a screen protector has been applied from the factory
Click to expand...
Click to collapse
Yes, that's exactly what you are seeing. The S10e does indeed have a factory installed plastic screen protector. You can really feel it around the camera as there's a cutout for the camera. I would expect it to scratch rather quickly, plus I don't think it provides nearly as much drop protection as a tempered glass one might.
I'm following along here hoping that there does wind up being an economical tempered glass screen protector that works well and doesn't life at the edges. Seems like this will be similar to my S7, where I was never really able to find something that works and just went naked.
Thank you for the response I've just been so confused with everyone saying the S10 and S10+ have one but not the S10e. I think you're right it is just a polyurethane plastic protector. And just a heads up I tried to apply a tempered glass protector over top of it and it definitely made it hard for the edges to stick.
willdogg78 said:
Thank you for the response I've just been so confused with everyone saying the S10 and S10+ have one but not the S10e. I think you're right it is just a polyurethane plastic protector. And just a heads up I tried to apply a tempered glass protector over top of it and it definitely made it hard for the edges to stick.
Click to expand...
Click to collapse
I had the same confusion. All of the media I've seen say the pre-installed one is only on the S10 and S10+, but if you look around the camera on the S10e, there's clearly a cutout that confirms there is a pre-installed screen protector on there. I'm still not exactly sure how to get it off. I picked around the edges a bit and nothing is coming up easily.
I'm not sure how well the edges of a tempered glass one will stick even if you took off the pre-installed one. I haven't seen any reports of an economical one that works yet. I think I'm going to be in the same boat as I am with my S7 and be forced to go without one.
Follow
DarkMage619 said:
I'm using the PureGear HD Clear Tempered Glass Screen Protector https://www.amazon.com/dp/B07P7S174H/ref=cm_sw_r_cp_apa_i_byaHCbZY5Q1N0
It only has adhesive on the edges so there is no bubbles. It is case friendly and is a decent alternative to the whitedome which remains the superior choice for the 2.5D screens.
Click to expand...
Click to collapse
If anyone looking for decent glass. This brand is good to go, but expensive. Might wait out a little.
Sent from my SM-G970U1 using Tapatalk
my factory installed screen protector is starting to show some scratches and wear. Getting near desperate trying to find a good affordable screen protector for the s10e
I ordered an Alinsea glass protector from amazon, sounds like a knock off of a Whitestone from their description. It doesn't have a cut out for the front facing camera, which is great, as a cut out just seems to collect pocket lint. I have not received it yet.
1
Tapatalkkal küldve az én SM-G970F eszközömről
freddie813 said:
I ordered an Alinsea glass protector from amazon, sounds like a knock off of a Whitestone from their description. It doesn't have a cut out for the front facing camera, which is great, as a cut out just seems to collect pocket lint. I have not received it yet.
Click to expand...
Click to collapse
I got one. First time doing an install of this type and given the barebones installation tools provided, it was above average difficultly. First one ended up with bubbles.