Database Info

Can't install TWRP in Android 9

I was running stock OOS with Android 8.1 with the normal TWRP and Magisk working. When the OOS 9 got out, I installed the full OTA through TWRP (dirty flash) and everything went perfectly, with no problems whatsoever, but I lost TWRP and Magisk, of course.
Now in Android 9 I can't seem to reinstall TWRP (I'm trying with the latest bluespark): I can boot TWRP from fastboot and install Magisk, everything is fine, Magisk works great. However, when I try to install the TWRP zip (through the fastboot loaded TWRP), the phone freezes at the bootloader warning and doesn't boot (and I have to reinstall the full OTA zip to get the phone working again). Or, some other times, it reboots always to the recovery and never to the OS. Any ideas on how to solve this? Thanks in advance.

What version of bluespark are you using ?? v2

Glsoto said:
What version of bluespark are you using ?? v2
Click to expand...
Click to collapse
9.85v2

first fastboot boot twrp.img, the install twrp.zip , reboot recovery and then magisk..

I also tried to fastboot boot blu_spark twrp V2 IMG.... This ended in a black screen. I used the latest official twrp without a problem on pie.

Glsoto said:
first fastboot boot twrp.img, the install twrp.zip , reboot recovery and then magisk..
Click to expand...
Click to collapse
Thanks! Did it in that exact order and now everything works. I was forgetting to reboot the recovery before installing Magisk.

don't flash magisk on the temporary TWRP

Hexyl said:
I also tried to fastboot boot blu_spark twrp V2 IMG.... This ended in a black screen. I used the latest official twrp without a problem on pie.
Click to expand...
Click to collapse
Cuz of kernel panic. When you boot into twrp after fastboot command - unplag your cable from pc when the command is done, then disable mtp, connect to pc and re-enable mtp.
Dont forget to click thanks
And yeah, use blu spark's TWRP, not official one

Came here from google.
Glsoto said:
first fastboot boot twrp.img, the install twrp.zip , reboot recovery and then magisk..
Click to expand...
Click to collapse
This procedure didn't work for me, for some reason "fastboot boot twrp.img" was leading to black screen.
What worked for me was
1) Boot to fastboot
2) fastboot flash twrpXXX.img
3) Without rebooting, select recovery from fastboot's bootloader menu
4) If you are able to boot in twrp this time, then flash blu spark twrp.
5) Reboot
6) Try to reboot in recovery as usual
If all worked well, you should see twrp recovery.
Cheers.

Alekcander said:
Came here from google.
This procedure didn't work for me, for some reason "fastboot boot twrp.img" was leading to black screen.
What worked for me was
1) Boot to fastboot
2) fastboot flash twrpXXX.img
3) Without rebooting, select recovery from fastboot's bootloader menu
4) If you are able to boot in twrp this time, then flash blu spark twrp.
5) Reboot
6) Try to reboot in recovery as usual
If all worked well, you should see twrp recovery.
Cheers.
Click to expand...
Click to collapse
Hi
I have same problem ... after installing twrp i have black scream. twrp doesnt boot
I trying to use this method but cmd give me ]
C:\Android>fastboot flash twrp-3.3.1-x_blu_spark_v9.101_op6.img
unknown partition 'twrp-3.3.1-x_blu_spark_v9.101_op6.img'
error: cannot determine image filename for 'twrp-3.3.1-x_blu_spark_v9.101_op6.img'
I have restored phone with msn download
OnePlus is again unlocked
I have this problem sins i tried to install magisk and after reboot my op doesn't boot to OS with crash error
any ideas ?

jasiorr said:
Hi
I have same problem ... after installing twrp i have black scream. twrp doesnt boot
I trying to use this method but cmd give me ]
C:\Android>fastboot flash twrp-3.3.1-x_blu_spark_v9.101_op6.img
unknown partition 'twrp-3.3.1-x_blu_spark_v9.101_op6.img'
error: cannot determine image filename for 'twrp-3.3.1-x_blu_spark_v9.101_op6.img'
I have restored phone with msn download
OnePlus is again unlocked
I have this problem sins i tried to install magisk and after reboot my op doesn't boot to OS with crash error
any ideas ?
Click to expand...
Click to collapse
You need to Fastboot boot twrp. Img

jasiorr said:
Hi
I have same problem ... after installing twrp i have black scream. twrp doesnt boot
I trying to use this method but cmd give me ]
C:\Android>fastboot flash twrp-3.3.1-x_blu_spark_v9.101_op6.img
unknown partition 'twrp-3.3.1-x_blu_spark_v9.101_op6.img'
error: cannot determine image filename for 'twrp-3.3.1-x_blu_spark_v9.101_op6.img'
I have restored phone with msn download
OnePlus is again unlocked
I have this problem sins i tried to install magisk and after reboot my op doesn't boot to OS with crash error
any ideas ?
Click to expand...
Click to collapse
yldlj said:
You need to Fastboot boot twrp. Img
Click to expand...
Click to collapse
Alekcander said:
Came here from google.
This procedure didn't work for me, for some reason "fastboot boot twrp.img" was leading to black screen.
What worked for me was
1) Boot to fastboot
2) fastboot flash twrpXXX.img
3) Without rebooting, select recovery from fastboot's bootloader menu
4) If you are able to boot in twrp this time, then flash blu spark twrp.
5) Reboot
6) Try to reboot in recovery as usual
If all worked well, you should see twrp recovery.
Cheers.
Click to expand...
Click to collapse
I have the same problem as Alekcander
When I try to use command ,, fastboot boot twrp-xxx.img nothing happens. I mean mobile restart as always but there is only black screen and notification diode shine white ...
Also Alekcander method doesn't work:
C:\Android>fastboot flash twrp-3.3.1-x_blu_spark_v9.101_op6.img
unknown partition 'twrp-3.3.1-x_blu_spark_v9.101_op6.img'
error: cannot determine image filename for 'twrp-3.3.1-x_blu_spark_v9.101_op6.img'
I tried official twrp and is the same , I tried to disconnect from usb when mobile is restarting also nothing ...
so again ... I have restored phone with msn download -> unlock bootloader...
i have this issue sins i tried to install magisk and after reboot my OP6 doesn't boot to OS and give crash error
any other ideas ?

Solved I have to update system to more recently version. Why twrp doesn't work with oxygen is 5.1.5 ?

I cant get TWRP to "stick" on my new pixel - following lineage directions

Got my pixel from swappa the other day. So far I:
1. Unlocked the bootloader
2. temporarily booted into TWRP 3.3.0-0 (3.3.1-0 wouldnt let me format for some reason)
3. Installed the most current microG lineage build. (and then also flashed magisk 19.3 immediately after)
It boots into lineage, but when I boot into recovery, it gives me the lineage recovery. Since when does lineage wipe out twrp?
I tried sideloading over adb and also right through the temporary twrp, but it doesnt make a difference. Also - in lineage, I see no sign of magisk - which is normally there after installing a rom and then magisk.
I also tried the twrp-pixel installer.zip, which also did NOTHING.
Am I missing something? This is my first phone with the weird dual partitions - is that why its so weird? Ive never had this problem before.
EDIT: Also when trying to flash twrp via fastboot it gives me
"(bootloader) Flashing active slot "_a"
FAILED (remote: partition [recovery] doesn't exist)
finished. total time: 1.016s"

Hi mate, here's a link regarding the lineage recovery thing. It may explain some of what you have occurring.
https://lineageos.org/Changelog-19/
I had twrp on my pixel a while back and it was sticking so not sure what that's all about. If you have booted twrp.img, flashed ROM, flashed twrp zip and rebooted it should be on both slots. You may need to activate root in Dev options to get root up and running, been a while since used it so that might not be accurate as currently on Q.

after flashing a rom you need to flash the twrp-pixel installer.zip right after. Then reboot into recovery (dont need to fastboot since the zip installs twrp to the boot.img ramdisk) to switch slots (switches automatically). Back in recovery you can install magisk.

Devices with A/B partitions do not have a recovery partition. What we think of as recovery is actually part of the boot.img file. When you update the OS, you update the boot.img. The TWRP installer .zip finds and unpacks the boot.img, then modifies it to make the device load TWRP instead of stock recovery. By default, the TWRP installer installs to both A & B partitions. If you screw something up (like flashing the wrong version of TWRP, for example) and put yourself into a bootloop, you can often recover by simply flashing the original boot.img file with fastboot flash boot boot.img .
Here's an article which was written by XDA to help explain the differences in how A/B phones work, and the ramifications for us flashers:
https://www.xda-developers.com/how-...ess-updates-affect-custom-development-on-xda/

Impossible to install custom rom zip with TWRP

Hi, earlier, I wanted to change the rom of my mi 5s. I've got an error 7 follow by "Failed to update system image" on twrp during the flash. I tried many things: edit the installation script, format all the data, update and downgrade TWRP, lock and unlock bootlander and finally perform a fastboot flash using mi flash and the last one worked. But I am not longer able to flash a custom rom without getting error 7 after the "Patching system image unconditionally" message. I've tested lineage, pixel experience, miui, even 8.1 rom but same result. I'm stuck with fastboot global miui 10 (oreo )
Btw, I think that after the error the partition are corrupted since I can't repair them with TWRP.
I don't know what I can do more.I think that i figured out that I am able to flash system.img file using fastboot but I can't flash zip rom using recovery.
As anyone encounter this ?

bob_bricoleur said:
Hi, earlier, I wanted to change the rom of my mi 5s. I've got an error 7 follow by "Failed to update system image" on twrp during the flash. I tried many things: edit the installation script, format all the data, update and downgrade TWRP, lock and unlock bootlander and finally perform a fastboot flash using mi flash and the last one worked. But I am not longer able to flash a custom rom without getting error 7 after the "Patching system image unconditionally" message. I've tested lineage, pixel experience, miui, even 8.1 rom but same result. I'm stuck with fastboot global miui 10 (oreo )
Btw, I think that after the error the partition are corrupted since I can't repair them with TWRP.
I don't know what I can do more.I think that i figured out that I am able to flash system.img file using fastboot but I can't flash zip rom using recovery.
As anyone encounter this ?
Click to expand...
Click to collapse
This usually happens when a partition is missed the way that TWRP doesn´t recognice the exact model and this error 7 is a kind of protection to avoid further mistake.
Some TWRP has in-built the option to fix system issue in advanced settings or then of try to flash a system image this option could appear.
Can you upload from any of the roms the updater script that is inside?
Also sometime you did a repartition? Or flashed some GSI?

SubwayChamp said:
This usually happens when a partition is missed the way that TWRP doesn´t recognice the exact model and this error 7 is a kind of protection to avoid further mistake.
Some TWRP has in-built the option to fix system issue in advanced settings or then of try to flash a system image this option could appear.
Can you upload from any of the roms the updater script that is inside?
Also sometime you did a repartition? Or flashed some GSI?
Click to expand...
Click to collapse
Here is a script from pixel experience:
https://pastebin.com/DXgKrB8Z
I have the error "E1001: Failed to update system image" or "E2001: Failed to update vendor image" or just error 7 if I remove all the abort and assert.
I never did a repartition or flashed a GSI.

bob_bricoleur said:
Here is a script from pixel experience:
https://pastebin.com/DXgKrB8Z
I have the error "E1001: Failed to update system image" or "E2001: Failed to update vendor image" or just error 7 if I remove all the abort and assert.
I never did a repartition or flashed a GSI.
Click to expand...
Click to collapse
Just to be sure I guess you removed all the lines with getprop and not only the words.
Try first flashing persist image through fastboot.
If not flash the rom not through fastboot but using EDL mode and MiFlash tool, if you have unlocked bootloader you can send device through adb with: adb reboot edl or through fastboot with: fastboot oem edl

SubwayChamp said:
Just to be sure I guess you removed all the lines with getprop and not only the words.
Try first flashing persist image through fastboot.
If not flash the rom not through fastboot but using EDL mode and MiFlash tool, if you have unlocked bootloader you can send device through adb with: adb reboot edl or through fastboot with: fastboot oem edl
Click to expand...
Click to collapse
Yep I removed all the line
I managed to flash a full fastboot rom with mi flash and I think that during the process, a persist image was flashed. So i'm runing a stock miui. I even managed to flash Twrp and magisk. But I can't flash a rom through TWRP even after that :crying:

bob_bricoleur said:
Yep I removed all the line
I managed to flash a full fastboot rom with mi flash and I think that during the process, a persist image was flashed. So i'm runing a stock miui. I even managed to flash Twrp and magisk. But I can't flash a rom through TWRP even after that :crying:
Click to expand...
Click to collapse
Some times causes different results flashing the fastboot full image through EDL mode (download mode) instead of through fastboot mode.
It could be the issue the TWRP version if there is other available.
And you could try deleting the recovery partition with fastboot erase recovery, then boot (don´t flash yet) to recovery using fastboot boot whateveriscalled.img, then in TWRP flash the TWRP image or the installer zip, then reboot for first time to TWRP and try again.

Unable to flash TWRP. Lost Recovery, OS and only have unlocked bootloader.

Hi,
I was on Oxygen OS 10.0.0. Rooted with twrp-3.3.1-4-enchilada and magisk 20.1. (I had used this guide to do it. https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213) Today I downloaded the zip for 10.0.1 from the Oxygen Updater app and tried to flash it like I have done for OOS 9 in the past as usual. I went to recovery (I did not backup), I just wiped my data (not internal storage), cache and system. After that I tried to install the new zip but I got an error. It just said error unable to install. Didn't mention why. I tried flashing the older OOS 10 zip and got the same error.
So I thought I will try flashing on the other slot. I was on slot B. I switched to slot A and got the same error.
So I thought I will try to sideload. When I tried that I got the same error. So I thought I will try to reflash the twrp img itself. I went to fastboot mode and tried runnning this command
fastboot boot twrp-3.3.1-14-enchilada-Q-mauronofrio.img
It showed me this error
Sending 'boot.img' (65536 KB) OKAY [ 1.609s]
Booting FAILED (remote: 'unknown command')
fastboot: error: Command failed
Now I don't have any recovery at all. I have just the unlocked bootloader and no OS nor recovery. What can I do to flash TWRP again and install either OOS 10.0.1 zip or 10.0.0 zip? Any help will be great.
Thanks

Arnavzz said:
Hi,
I was on Oxygen OS 10.0.0. Rooted with twrp-3.3.1-4-enchilada and magisk 20.1. (I had used this guide to do it. https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213) Today I downloaded the zip for 10.0.1 from the Oxygen Updater app and tried to flash it like I have done for OOS 9 in the past as usual. I went to recovery (I did not backup), I just wiped my data (not internal storage), cache and system. After that I tried to install the new zip but I got an error. It just said error unable to install. Didn't mention why. I tried flashing the older OOS 10 zip and got the same error.
So I thought I will try flashing on the other slot. I was on slot B. I switched to slot A and got the same error.
So I thought I will try to sideload. When I tried that I got the same error. So I thought I will try to reflash the twrp img itself. I went to fastboot mode and tried runnning this command
fastboot boot twrp-3.3.1-14-enchilada-Q-mauronofrio.img
It showed me this error
Sending 'boot.img' (65536 KB) OKAY [ 1.609s]
Booting FAILED (remote: 'unknown command')
fastboot: error: Command failed
Now I don't have any recovery at all. I have just the unlocked bootloader and no OS nor recovery. What can I do to flash TWRP again and install either OOS 10.0.1 zip or 10.0.0 zip? Any help will be great.
Thanks
Click to expand...
Click to collapse
So basically what happened there is TWRP doesn't boot with the oxygenos 10 bootloader. You will need to use the MSM download tool to unbrick your device.
Sent from my ONEPLUS A6003 using Tapatalk

Kaleshwar said:
So basically what happened there is TWRP doesn't boot with the oxygenos 10 bootloader. You will need to use the MSM download tool to unbrick your device.
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
But how is that? I was on stable OOS 10 before rooting following this link https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213. As per this, the first step is to flash twrp and that image did flash back when I did it. Any idea why it doesn't work now?
Also, do you have any links for the MSM download tool and any guide if there is?
Thanks

Arnavzz said:
But how is that? I was on stable OOS 10 before rooting following this link https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213. As per this, the first step is to flash twrp and that image did flash back when I did it. Any idea why it doesn't work now?
Also, do you have any links for the MSM download tool and any guide if there is?
Thanks
Click to expand...
Click to collapse
The problem isn't TWRP it's the bootloader. That's all I know. And for the MSM download tool. See attached link below.
https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
Sent from my ONEPLUS A6003 using Tapatalk

Do not boot the twrp from fastboot it won't work
Just do
Fastboot flash boot twrp.img
Then reboot the device to twrp it will boot to trwp and then flash the new a10 zip and immediately afterwards flash the twrp zip

chintu1234 said:
Do not boot the twrp from fastboot it won't work
Just do
Fastboot flash boot twrp.img
Then reboot the device to twrp it will boot to trwp and then flash the new a10 zip and immediately afterwards flash the twrp zip
Click to expand...
Click to collapse
This doesn't work. It flashes successfully but when I select Reboot Recovery and press the power button, it boots back to the bootloader.

Maybe wrong twrp img
Try the older 3.3.1-12 twrp.img and then try
Also try the following as well
Fastboot flash boot_a twrp.img
Fastboot flash boot_b twrp.img
And try just reboot not reboot to recovery

Kaleshwar said:
The problem isn't TWRP it's the bootloader. That's all I know. And for the MSM download tool. See attached link below.
https://forum.xda-developers.com/oneplus-6/how-to/tool-msmdownloadtool-v4-0-international-t3798892
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
Thanks so much for that! I have been able to recover the phone using MSM download tool. Now will update to 10 using the phones OTA.
However, I have one question, if I update to OOS 10.0.1, do you think this original post on rooting OOS 10, will work for it? https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213 Or do you suggest to not root and wait?

Arnavzz said:
Thanks so much for that! I have been able to recover the phone using MSM download tool. Now will update to 10 using the phones OTA.
However, I have one question, if I update to OOS 10.0.1, do you think this original post on rooting OOS 10, will work for it? https://forum.xda-developers.com/oneplus-6/how-to/how-to-flash-twrp-magisk-android-10-t3988213 Or do you suggest to not root and wait?
Click to expand...
Click to collapse
You can try it . Looks pretty solid.
Sent from my ONEPLUS A6003 using Tapatalk

Put the TWRP zip and stock boot img on phone (a TWRP img is not a TWRP zip)
Remove Magisk modules first to avoid issues (in TWRP if you cannot boot to system. https://forum.xda-developers.com/showpost.php?p=72542167&postcount=242)
Update through local update to 10.3.2 is what I prefer to do. Then I do the following.
Reboot to let phone finish whatever. reboot into bootloader.
1. Fastboot TWRP img - fastboot flash boot twrp-3.3.1-18-enchilada-Q-mauronofrio.img - ( https://sourceforge.net/projects/ma...3.3.1-18-enchilada-Q-mauronofrio.img/download )
2. Use volume up to recovery and power button to boot to recovery
3. Flash 10.3.2 stock boot img while in TWRP (or current ROM stock boot img).
4. Flash TWRP zip while in TWRP (https://sourceforge.net/projects/ma...-enchilada-installer-mauronofrio.zip/download ) or Blu zip (https://github.com/engstk/android_device_oneplus_enchilada/releases)
5. Reboot to recovery
6. Flash Magisk 20.3 while in TWRP
(Flash a Q kernel if you want one other than stock)
7. Reboot system
You are now rooted
Stock boot 10.3 img
https://mega.nz/#!PO5x1bYA!dKq3pbxUdpb16zhuqM_idqvWNLnsu4Ky4IAmYQiQUDw
Most stock boot imgs
https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853

I had similar situation last evening.
I made the mistake of having a factory reset on rooted 9.0.8 and then trying to flash the 10.0.1
I got the same error, so I had to connect my mobile to my laptop, fastboot to the newest TWRP, flash the TWRP, flash the 9.0.9, flash the 10.0.1, flash magisk 20.x and then everything was working.

xpakage said:
Put the TWRP zip and stock boot img on phone (a TWRP img is not a TWRP zip)
Remove Magisk modules
Update through local update 10.3 or current ROM
Reboot
1. Fastboot TWRP img - fastboot flash boot twrp-3.3.1-16-enchilada-Q-mauronofrio.img - ( https://androidfilehost.com/?fid=4349826312261678088 )
2. Use volume up to recovery and power button to boot to recovery
3. Flash 10.3 stock boot img while in TWRP (or current ROM stock boot img).
4. Flash TWRP zip while in TWRP ( https://androidfilehost.com/?fid=4349826312261678087 ) or Blu zip (https://github.com/engstk/op6/releases/download/r112/blu_spark_r112-oos_op6-op6t_0dd5f9228.zip)
5. Reboot to recovery
6. Flash Magisk 20.1 while in TWRP
(Flash a Q kernel if you want one other than stock)
7. Reboot system
You are now rooted
Stock boot 10.3 img
https://drive.google.com/file/d/1w44cUg815g-H1h_6gObUVPLDTc_dtiMX/view
Most stock boot imgs
https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853
Click to expand...
Click to collapse
This worked for me.. Finally. PS - I did in a slightly different order. I installed twrp first, booted into twrp, made sure I was in slot A. If I wasnt, I rebooted to recovery. If I still wasnt I set slot to A manually then rebooted to recovery again. Flashed the stock boot img you linked to boot, then rebooted to recovery slot b (same process I did to get to slot a) then flashed the stock boot img to boot again THEN finally installed magisk. Booted to system, where it hanged a bit, rebooted before getting into android, but booted in just fine after that..
For some reason if you don't flash stock img to slot A (and maybe slot B too, I did this for good measure) before installing magisk everything dies a horrible death and breaks, which can't even be recovered from /boot /system backups..
EDIT: Tried to reboot into recovery, which reverted back to stock for some reason after doing the above steps. So I proceeded to install the bluspark recovery, rebooted into recovery, made sure I was in slot b, made a back up of the boot image, then flashed bluspark kernel. Got stuck at the unlocked bootloader screen. Rebooted into recovery, restored my /boot back. Still stuck when I try to boot into system. Fixed it by booting back into recovery in slot A flashing stock boot img, then into slot b stock boot, then magisk, but also installed bluspark kernel here because I had a feeling I would lose twrp from flashing to stock boot img, and that the issue was caused by twrp (both twrp-3.3.1-16-enchilada-installer-mauronofrio and twrp-3.3.1-x_blu_spark_v9.108_op6 have this issue). Guess what? Turns out I was right. Having twrp breaks everything after you install magisk, so you need to flash the stock boot img before flashing magisk for some reason.. and cant install twrp again unless you dont mind bricking your phone.
EDIT2: F2FS works, just boot into recovery via fastboot (this should be slot b), change /data to f2fs, boot back into fastboot then into recovery again by fastboot (slot b again), flash stock boot img > magisk > bluspark kernel > f2fs_fstab.zip > f2fs_optimize.zip > factory reset/wipe (from twrp before rebooting), done just reboot into system. You of course lose twrp because magisk doesnt like twrp on oos 10.x for some reason, and will need to set everything up again to cause of the wipe. If you dont factory reset/wipe from twrp before booting into system your system will crash and reboot every time you boot into android, then have to do all the steps I listed again.
EDIT3: Never mind, I was wrong, f2fs makes almost all your apps and storage unusable. Not sure if it's cause of the rom (OOS10.3.0) or because we have to flash stock boot.img and get rid of twrp before booting into system. Either way, f2fs has never really been stable or fun to get working so better to stick to ext4.. that few percent performance boost isnt worth it.
EDIT4: This is my last update. After experimenting with different things, bricking my phone, restoring it via fastboot rom, many many times, I've verified the simplest and cleanest way to install magisk.. Do note you wont be able to keep twrp.
Method A - If you already have twrp
Boot recovery into slot a, flash your rom's stock boot.img, then boot into your recovery in slot b (dont boot into slot a recovery because slot a wont have twrp anymore), flash your rom's stock boot.img, magisk and (optional) your kernel of choice (or not) in that order, then you can boot boot into system. That's it.
Method B - If you don't have twrp
Boot into fastboot, and from your cmd/terminal run fastboot flash boot yourtwrp.img (I suggest Mauronofrio's twrp-3.3.1-16-enchilada-Q-mauronofrio.img or newer). Use your volume buttons to select boot into recovery. Make sure your active slot is B, (if it isnt, install twrp (bluspark and Mauronofrio's twrp both work great) by zip, then follow the steps above in method A). Once you've verified you're in slot B flash your rom's stock boot.img, magisk and (optional) your kernel of choice (or not) in that order, then you can boot into system. That's it.
Maybe @mauronofrio or @eng.stk can verify why magisk or twrp bricks the system when you install them together on OOS 10.

not working
sir i follow your steps but phone is stuck on boot i have official version a10 10.3.0 update on 25.12.19
pls tell me how i get root access....

gauravkapoor99150 said:
sir i follow your steps but phone is stuck on boot i have official version a10 10.3.0 update on 25.12.19
pls tell me how i get root access....
Click to expand...
Click to collapse
U need to flash the magisk v22 zip file through the .108 TWRP recovery
Sent from my ONEPLUS A6003 using Tapatalk

RASTAVIPER said:
U need to flash the magisk v22 zip file through the .108 TWRP recovery
Sent from my ONEPLUS A6003 using Tapatalk
Click to expand...
Click to collapse
sir can you send me a link

lemon07r said:
Maybe @mauronofrio or @eng.stk can verify why magisk or twrp bricks the system when you install them together on OOS 10.
Click to expand...
Click to collapse
@mauronofrio wrote the following in his TWRP thread a while ago:
So little update, after some tests i'm sure there is a compatibility problem between twrp and magisk, i was able to get only one of them, so actually i don't know how to proceed, i need to understand if it is a twrp problem or a magisk problem, TWRP is in stand-by for now.
There are not problems on Android Pie, if you need of the twrp on android Q just flash in boot partition the Q .img (fastboot flash boot twrp.img) and then reboot from fastboot in recovery. Before publishing the twrp I had not tested magisk and twrp together.
On Android 10 use only magisk 19.4
Click to expand...
Click to collapse

xpakage said:
Put the TWRP zip and stock boot img on phone (a TWRP img is not a TWRP zip)
Remove Magisk modules first to avoid issues (in TWRP if you cannot boot to system. https://forum.xda-developers.com/showpost.php?p=72542167&postcount=242)
Update through local update to 10.3.2 is what I prefer to do. Then I do the following.
Reboot to let phone finish whatever. reboot into bootloader.
1. Fastboot TWRP img - fastboot flash boot twrp-3.3.1-18-enchilada-Q-mauronofrio.img - ( https://sourceforge.net/projects/ma...3.3.1-18-enchilada-Q-mauronofrio.img/download )
2. Use volume up to recovery and power button to boot to recovery
3. Flash 10.3.2 stock boot img while in TWRP (or current ROM stock boot img).
4. Flash TWRP zip while in TWRP (https://sourceforge.net/projects/ma...-enchilada-installer-mauronofrio.zip/download ) or Blu zip (https://github.com/engstk/android_device_oneplus_enchilada/releases)
5. Reboot to recovery
6. Flash Magisk 20.3 while in TWRP
(Flash a Q kernel if you want one other than stock)
7. Reboot system
You are now rooted
Stock boot 10.3 img
https://mega.nz/#!PO5x1bYA!dKq3pbxUdpb16zhuqM_idqvWNLnsu4Ky4IAmYQiQUDw
Most stock boot imgs
https://forum.xda-developers.com/oneplus-6/how-to/patched-boot-image-magisk-16-7-beta-t3818853
Click to expand...
Click to collapse
Basically worked for me, too, with 2 exceptions:
- this tool to remove magisk modules etc. wouldn't be flashed, always ended in an unnamed error; probably the cause for some other problems?
- flashing boot.img (V 10.3.4 from this thread) didn't work for me, I always ended up in twrp's splash screen
- got it solved by dirty flashing the full V 10.3.4 ROM (again from the above thread)
Many thanks once again!

i can't seem to boot into TWRP

first time OP7 Pro root, trying to install pixel experience rom. got fastboot, oem unlock and twrp successfully done but i cannot boot into twrp. back in stock OS so not bricked, but even after i repeated and flashed twrp (allegedly powershell says it was successful), i just cannot boot into twrp recovery. i downloaded the 10.3.8 directly from oneplus' site, not sure if i need to flash that first and try twrp again? i just have no idea what i'm doing wrong. thanks for any help!

Might be you only fastboot boot the twrp img. After you do that you need to install the TWRP zip for it to be permanent while in in twrp.