I think I made some mistake by deleting something under advanced wipe of TeamWin recovery. Now my MOTO G XT1033 is doomed. It boots into fastboot mode by default and it says -------
Fastboot Reason : UTAG "flashfail" configured as fastboot. Please help.
Connect in fastboot mode (initial black screen) and run:
Code:
fastboot oem fb_mode_clear
How to Remove Unlocked Bootloader Warning on Moto X4
Shoutout/Credits to xda member @AvenidaDelGato for the modified logo bin file.
Text Guide.
Make sure adb and fastboot are setup and working.
Donwload and Unzip the modified logo file. Place logo3.bin in platform-tools folders, or whereever you have fastboot and adb.
Navigate to adb/fastboot folder
Windows
Code:
adb devices
Code:
adb reboot bootloader
Code:
fastboot devices
Code:
fastboot flash logo_a logo3.bin
Code:
fastboot flash logo_b logo3.bin
Code:
fastboot reboot
Mac/Linux
Code:
./adb devices
Code:
./adb reboot bootloader
Code:
./fastboot devices
Code:
./fastboot flash logo_a logo3.bin
Code:
./fastboot flash logo_b logo3.bin
Code:
./fastboot reboot
Downloads
Modified Logo.bin zip file - https://forum.xda-developers.com/showpost.php?p=77013516&postcount=4
Mirror of Modified logo.bin zip file - https://mega.nz/#!eYFiVaxT!mpt4RhJDToEcJG4TSpw-CBePLIhd_hm8OjRGTu3egoU
ADB and Fastboot - https://www.xda-developers.com/adb-fastboot-any-directory-windows-linux/
Motorola Drivers - https://support.motorola.com/us/en/drivers
Thanks, that worked to remove the bootloader unlocked warning screen!
One other thing though is when the phone is first turned on while the Moto M logo is still on the screen (just before the Moto startup animation), a line of yellow console text appears over the Moto M logo that says "Verity mode is set to logging." Is there a way to turn that off? Aside from unlocking the bootloader, flashing the logo3.bin file and installing Magisk Manager from TWRP, my phone/ROM is a completely stock retail XT1900-1 (I didn't even flash TWRP to the recovery partition, I just booted it with fastboot to backup my device and install Magisk).
If anyone can help safely remove that line about verity logging without messing anything up that'd be awesome.
kofruge said:
If anyone can help safely remove that line about verity logging without messing anything up that'd be awesome.
Click to expand...
Click to collapse
I think verity is set to logging is not part of the logo. It's a text message which is coming up for a reason i do not know.
Be careful with this method, when you receive updates via OTA, you will not be able to update them since they will get an error ...
Oh yeah, didn't think of that... Any way to fix OTA installation after flashing this?
kofruge said:
Thanks, that worked to remove the bootloader unlocked warning screen!
One other thing though is when the phone is first turned on while the Moto M logo is still on the screen (just before the Moto startup animation), a line of yellow console text appears over the Moto M logo that says "Verity mode is set to logging." Is there a way to turn that off? Aside from unlocking the bootloader, flashing the logo3.bin file and installing Magisk Manager from TWRP, my phone/ROM is a completely stock retail XT1900-1 (I didn't even flash TWRP to the recovery partition, I just booted it with fastboot to backup my device and install Magisk).
If anyone can help safely remove that line about verity logging without messing anything up that'd be awesome.
Click to expand...
Click to collapse
It worked for me as well on LOS 16, except for the Verity Logging Text, would be nice if we could turn that of too?
Just installed this and it works fine, but is there an Android One version/can one be made? Thanks!
MeowDotEXE said:
Just installed this and it works fine, but is there an Android One version/can one be made? Thanks!
Click to expand...
Click to collapse
https://forum.xda-developers.com/moto-x4/themes/bootlogo-custom-bootlogos-dark-variant-t3832118
is there a way to restore the old logo?
vidra said:
is there a way to restore the old logo?
Click to expand...
Click to collapse
Just fastboot flash the boot logo file part of the factory firmware.
https://forum.xda-developers.com/moto-x4/how-to/guide-how-to-flash-official-factory-t3808348
munchy_cool said:
How to Remove Unlocked Bootloader Warning on Moto X4
Shoutout/Credits to xda member @AvenidaDelGato for the modified logo bin file.
Text Guide.
Make sure adb and fastboot are setup and working.
Donwload and Unzip the modified logo file. Place logo3.bin in platform-tools folders, or whereever you have fastboot and adb.
Navigate to adb/fastboot folder
Windows
Code:
adb devices
Code:
adb reboot bootloader
Code:
fastboot devices
Code:
fastboot flash logo_a logo3.bin
Code:
fastboot flash logo_b logo3.bin
Code:
fastboot reboot
Mac/Linux
Code:
./adb devices
Code:
./adb reboot bootloader
Code:
./fastboot devices
Code:
./fastboot flash logo_a logo3.bin
Code:
./fastboot flash logo_b logo3.bin
Code:
./fastboot reboot
Downloads
Modified Logo.bin zip file - https://forum.xda-developers.com/showpost.php?p=77013516&postcount=4
Mirror of Modified logo.bin zip file - https://mega.nz/#!eYFiVaxT!mpt4RhJDToEcJG4TSpw-CBePLIhd_hm8OjRGTu3egoU
ADB and Fastboot - https://www.xda-developers.com/adb-fastboot-any-directory-windows-linux/
Motorola Drivers - https://support.motorola.com/us/en/drivers
Click to expand...
Click to collapse
I appreciate your work very much! Is it too much to ask for a AndroidOne Boot Logo?
HACK3DANDR0ID said:
I appreciate your work very much! Is it too much to ask for a AndroidOne Boot Logo?
Click to expand...
Click to collapse
No need to quote the OP.
HACK3DANDR0ID said:
I appreciate your work very much! Is it too much to ask for a AndroidOne Boot Logo?
Click to expand...
Click to collapse
i dont make bootlogos
download android one firmware, and flash logo.bin from there
munchy_cool said:
i dont make bootlogos
download android one firmware, and flash logo.bin from there
Click to expand...
Click to collapse
Found what i was looking for thanks
kofruge said:
If anyone can help safely remove that line about verity logging without messing anything up that'd be awesome.
Click to expand...
Click to collapse
wanb1i said:
It worked for me as well on LOS 16, except for the Verity Logging Text, would be nice if we could turn that of too?
Click to expand...
Click to collapse
Flash the attached modified bootloader (unzip first).
Code:
fastboot flash bootloader no-verity-warning-bootloader.img
Found it from a telegram channel. Tested it myself.
Credit @abrfilho
Code:
SHA256SUMs:
b2efd37d2bef4e2de5bcbd7ca3e643a1e1e246d597e6ed4389679d321bebd2f0 no-verity-warning-bootloader.img
fcf3391a13f757d3f998c9b14c5ef40e6084d65b2d0162273d3842e75f972281 no-verity-warning-bootloader.zip
gleenfield97 said:
Flash the attached modified bootloader (unzip first).
Found it from a telegram channel. Tested it myself.
Credit @abrfilho
Click to expand...
Click to collapse
It worked for me, thank you heaps!
gleenfield97 said:
Flash the attached modified bootloader (unzip first).
Found it from a telegram channel. Tested it myself.
Credit @abrfilho
Click to expand...
Click to collapse
I tried this, and bootlooped. I am on stock 9.0 Retail US. Perhaps this is not the right one for my device.
jhedfors said:
I tried this, and bootlooped. I am on stock 9.0 Retail US. Perhaps this is not the right one for my device.
Click to expand...
Click to collapse
Maybe it's not compatible with stock. I'm using Havoc.
The AndroidOne logo.bin if anyone else needs it.
Extracted from stock XT1900-1_PAYTON_FI_9.0_PPW29.69-26_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip.
Md5: e306b8ea948a10ec304ca62ebcd60495
Just a warning: after flash the bootlogo file, it seems this change prevent OTA updates. Some hours ago, i receive the 2019 july security patch update and it fails at 90-95 percent. I make a factory reset and it didn't help. Then I flashed the stock rom and the update install very well.
Motorola Boot Logo Maker Modified success
but
fastboot flash logo_a logo.bin fail
Can anyone help me
[email protected] said:
Motorola Boot Logo Maker Modified success
but
fastboot flash logo_a logo.bin fail
Can anyone help me
Click to expand...
Click to collapse
I've tried too but also fails. Same with someone from 4pda forum.
All,
I successfully updated my Moto G Stylus (2021) [RETUS / XT2115-1] with the following fastboot commands:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta vbmeta.img
fastboot flash radio radio.img
fastboot flash bluetooth BTFM.bin
fastboot flash dsp dspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash recovery recovery.img
fastboot flash super super.img_sparsechunk.0
fastboot flash super super.img_sparsechunk.1
fastboot flash super super.img_sparsechunk.2
fastboot flash super super.img_sparsechunk.3
fastboot flash super super.img_sparsechunk.4
fastboot flash super super.img_sparsechunk.5
fastboot flash super super.img_sparsechunk.6
fastboot flash super super.img_sparsechunk.7
fastboot flash super super.img_sparsechunk.8
fastboot flash super super.img_sparsechunk.9
fastboot flash super super.img_sparsechunk.10
fastboot flash super super.img_sparsechunk.11
fastboot flash super super.img_sparsechunk.12
fastboot flash super super.img_sparsechunk.13
fastboot flash super super.img_sparsechunk.14
fastboot flash super super.img_sparsechunk.15
fastboot flash super super.img_sparsechunk.16
fastboot erase carrier
fastboot erase userdata [optional]
fastboot erase metadata
fastboot erase ddr
fastboot flash boot <name of magisk patched boot file.img> [optional]
fastboot oem fb_mode_clear
fastboot reboot
I downloaded the latest firmware from the Moto Rescue and Smart Assistant PC application.
Enjoy!
Caution: The flash commands can vary from one Software Channel to another, and the number sparsechunk(s) can change with the android versions.
You should always use the flashfile.xml or service.xml to get the flash commands.
Several ways to do that.
Online FlashFile Converter
Write a Batch File
XML to Bat Converter Tool for Windows
More here
[Guide] Using Fastboot.exe with Motorola devices
Guide: Using Fastboot.exe with Motorola Devices If your device has its own section please post in that section. You can ping me with @sd_shadow MediaTek or Qualcomm Chip? Do I have a MediaTek Device? see post #26 Info: If you have a MediaTek...
forum.xda-developers.com
sd_shadow said:
.....
You should always use the flashfile.xml or service.xml to get the flash commands.
.....
Click to expand...
Click to collapse
I like using Notepad++ to view a flashfile.xml from the extracted firmware. Right-click and open with, it formats it very nicely.
peajul said:
I successfully updated my Moto G Stylus (2021) [RETUS / XT2115-1] with the following fastboot commands: ...
Click to expand...
Click to collapse
Just curious, this was an actual "update"? OTA? Or did you just refresh a current install? Do you have a version number? I'm gonna plug-in to the MRSA app as soon as I can get my hands on my lady's phone, but I'm asking so I can be prepared for what I might find.
peajul said:
All,
I successfully updated my Moto G Stylus (2021) [RETUS / XT2115-1] with the following fastboot commands.....
Click to expand...
Click to collapse
Your list and order does match perfectly (except for the added Magisk-patched bootloader) with the flashfile.xml in my downloaded copy of XT2115-1_MINSK_RETUS_10_QPC30.Q4-31-26-1.
. . . I'm needing to reflash my lady's Stylus 2021, is why I went so far as to check in detail. Apparently I screwed up in manually copying the blocked numbers database from an older version of Android to her new XT2115-1. Something in Android 10 just doesn't like what I did (same thing I've done between Nougat and Pie with no problems at all). And then I further mangled the situation trying to fix it.
To Install First Put Device in Fastboot
adb reboot-bootloader
Then When On Fastboot
fastboot flash logo logo.bin
Thanks and Let me know if you like
WARNING YOU DO THIS AT YOUR OWN RISK
Commands:
adb reboot-bootloader
fastboot flash logo logo.bin
fastboot reboot
sdd17 and sdf17 are logo_a and _b sizes
Stock logo.bin is 9276kb
Weary about trying. Can you provide any evidence of it working? I would love to try it out.
Changed some things updated logo.bin
im using this now no problems metropcs variant
logo bin is under the max size so there is no problem flashing
Also if you want to go back to stock images this is the stock logo bin file
So flashing back to original would be the same commands except with this stock logo.bin
Commands:
adb reboot-bootloader
fastboot flash logo Stock_logo.bin
fastboot reboot
androidpimpz said:
To Install First Put Device in Fastboot
adb reboot-bootloader
Then When On Fastboot
fastboot flash logo logo.bin
Thanks and Let me know if you like
WARNING YOU DO THIS AT YOUR OWN RISK
Commands:
adb reboot-bootloader
fastboot flash logo logo.bin
fastboot reboot
Click to expand...
Click to collapse
How did you do it?
Yea. I've tried overwriting orange1, but haven't had any luck. I'm using an upstream version of MotoBootLogoMaker. https://github.com/raven428/MotoBootLogoMaker