Related
Hi All,
Have s6 SM-G920F international model. now my brother accidentally try wrong attempts in pin to unlock the phone. so phone got locked. and i give to guy who unlock the phone and after that i am not able to get official update . so have decided to install official stock firmware. details are below. when phone is return back to me have below version.
Old firmware :-
G920FXXU1AOCY 5.0.2 Lollipop, Initial release on 3/29/2015 for EE only.
New firmware which i try using ODIN :-
G920FXXU3QOJF Galaxy S6 SM-G920F 5.1.1 Stock Firmware -- This firmware is officially released on November 2015 for EE UK Galaxy S6 alone.Build date: October 12, 2015.
Got success in above firmware , PASS is result in ODIN.
But when phone reboot after this ,after erasing screen appear then it hang on logo screen. have waited around 20 mins but nothing happen. Have tried recovery mode also via wipe cache / factory reset , no change in result.
Have again try to install G920FXXU1AOCY but got sof rev fail in ODIN .
Have tried samsung switch for software update it's successful but when phone reboot it again stop there at logo screen.
In recovery mode -- G920FXXU3QOJF this show on top.
I don't whether phone was root or not as guy says he just unlock the phone. got this from UK .
Can anyone please help which firmware will now work on this case ? how to solve this issue.
Please help me as i mess up with my phone which work great before .
Tons of thanks to all.
Is there any firmware which work on all unlock or root phone for this model ? the above step from 5.0.2 have installed 5.1 is correct step ? i am working this phone from india,before doing this firmware update my sim card work properly. as phone was already unlock or rooted (not sure here whether it's rooted or not but sure as it's unlocked phone) as i can see EE apps in phone. please help me . it's hurt me on my decision to do this upgrade and create mess. :crying:
Can anyone pls help.. Thanks
dbarot87 said:
Can anyone pls help.. Thanks
Click to expand...
Click to collapse
have you solved this yet?
this helped me:
http://forum.xda-developers.com/gal...d-development/kernel-stockmod-kernel-t3100395
Hello, I have a soft bricked (hopefully thats the case) Samsung Galaxy S6 SM-G920F xme region (Malaysia) with android 6.0.1 latest stock rom.
It started when my device suddenly restarted and got stuck at the samsung logo (first screen).
I am able to boot it into Download Mode, tried reflashing with a fresh stock rom MM 6.0.1 with odin, flashing proccess was completed with no fail but it still stuck at the same screen.
I can't even boot into recovery mode so i can't wipe the cache partition, i noticed the Reactivaction Lock status is ON, i suspect that might be the culprit?
The things i tried so far:
1- Reflash with the latest stock firmware. Ticking the NAND erase all and repartition it with pit file also didn't work.
2- Samsung Smart Switch and Kies3. Flash completed but no effect.
3- Flashing any recovery files returns with "Custom binary(recovery) Blocked by R/L".
4- Sent it to my nearest Samsung service centre, they did try to repair it but only to be told that my S6 need a new motherboard the next day, which is out of my budget limit. But i am still hoping to find some other way to fix it, i believe this is just a "soft-brick" not a hard brick device.
Ideas guys? thanks.
Try to re flash stock odin firmware with erase all ticked ok ,
Good luck ,,
thereassaad said:
Try to re flash stock odin firmware with erase all ticked ok ,
Good luck ,,
Click to expand...
Click to collapse
Already tried that, still no luck..
mrkage said:
Hello, I have a soft bricked (hopefully thats the case) Samsung Galaxy S6 SM-G920F xme region (Malaysia) with android 6.0.1 latest stock rom.
It started when my device suddenly restarted and got stuck at the samsung logo (first screen).
I am able to boot it into Download Mode, tried reflashing with a fresh stock rom MM 6.0.1 with odin, flashing proccess was completed with no fail but it still stuck at the same screen.
I can't even boot into recovery mode so i can't wipe the cache partition, i noticed the Reactivaction Lock status is ON, i suspect that might be the culprit?
Ideas guys? thanks.
Click to expand...
Click to collapse
Try Samsung Smart Switch, it has some recovery features that can automate the process for you.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Droidriven said:
Try Samsung Smart Switch, it has some recovery features that can automate the process for you.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Click to expand...
Click to collapse
Thank you for taking a look at my problem here, i forgot to mention that i did try Samsung Smart Switch and Kies3, both managed to succesfully flashed the stock firmware, it reboots my device and still stuck at the same first screen.
mrkage said:
Thank you for taking a look at my problem here, i forgot to mention that i did try Samsung Smart Switch and Kies3, both managed to succesfully flashed the stock firmware, it reboots my device and still stuck at the same first screen.
Click to expand...
Click to collapse
I believe it is doing that because you have a locked bootloader. Normally that shouldn't be a problem unless you're trying to flash a firmware that is older than what you had.
What stock firmware version/build number did your device have? What firmware version/build number is what you are flashing? If what you're flashing is older it might be downgrading your bootloader, bootloader can't be downgraded on most locked bootloader Samsung devices these days.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Droidriven said:
I believe it is doing that because you have a locked bootloader. Normally that shouldn't be a problem unless you're trying to flash a firmware that is older than what you had.
What stock firmware version/build number did your device have? What firmware version/build number is what you are flashing? If what you're flashing is older it might be downgrading your bootloader, bootloader can't be downgraded on most locked bootloader Samsung devices these days.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Click to expand...
Click to collapse
Don't remember the build number, but it was a 6.0.1 firmware, i flashed it with the same stock firmware version.. but maybe the build number didn't match.
I read somewhere about the engineering bootloader, i know it is not so easy or even possible at the moment to find one for my current firmware version, but let's say if i have it, will it be possible for me to use it to remove the RL on my device?
mrkage said:
Don't remember the build number, but it was a 6.0.1 firmware, i flashed it with the same stock firmware version.. but maybe the build number didn't match.
I read somewhere about the engineering bootloader, i know it is not so easy or even possible at the moment to find one for my current firmware version, but let's say if i have it, will it be possible for me to use it to remove the RL on my device?
Click to expand...
Click to collapse
Did you flash a firmware from a different g920 series device? Or did you flash the firmware for your specific model number and your and carrier?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Droidriven said:
Did you flash a firmware from a different g920 series device? Or did you flash the firmware for your specific model number and your and carrier?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Click to expand...
Click to collapse
Only did for my specific model number and carrier
mrkage said:
Only did for my specific model number and carrier
Click to expand...
Click to collapse
Let me backtrack. Do you know if USB debugging is on?
Did you flash TWRP with a locked bootloader before this happened? Is that what caused the issue?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Droidriven said:
Let me backtrack. Do you know if USB debugging is on?
Did you flash TWRP with a locked bootloader before this happened? Is that what caused the issue?
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Click to expand...
Click to collapse
USB debugging and Developer Mode was never turned on that device.
Negative, i did try flashing TWRP but it was after it got stuck at the logo screen and only able to boot into Download Mode, the flashing came back failed with "Custom Binary (recovery) Blocked by RL" message.
Flashing it with the latest stock recovery i found online also gave me the same error message.
mrkage said:
USB debugging and Developer Mode was never turned on that device.
Negative, i did try flashing TWRP but it was after it got stuck at the logo screen and only able to boot into Download Mode, the flashing came back failed with "Custom Binary (recovery) Blocked by RL" message.
Flashing it with the latest stock recovery i found online also gave me the same error message.
Click to expand...
Click to collapse
Just out of curiosity, have you tried booting to safe mode? If any of the apps that you installed before this happened were causing an issue or bootloop before you flashed are still there, it/they could still be causing the bootloop. Remember, I said that it doesn't wipe data unless you are upgrading or downgrading bootloader/baseband, what you flashed wasn't an upgrade or a downgrade so your data is there. Boot to safe mode and disable/uninstall the apps that might be causing the issue.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Droidriven said:
Just out of curiosity, have you tried booting to safe mode? If any of the apps that you installed before this happened were causing an issue or bootloop before you flashed are still there, it/they could still be causing the bootloop. Remember, I said that it doesn't wipe data unless you are upgrading or downgrading bootloader/baseband, what you flashed wasn't an upgrade or a downgrade so your data is there. Boot to safe mode and disable/uninstall the apps that might be causing the issue.
I DO NOT PROVIDE HELP IN PM, KEEP IT IN THE THREADS FOR EVERYONE TO SHARE
Click to expand...
Click to collapse
Didn't try that... but nevermind. I accidentally damaged my screen while trying to dissasemble it last night, a very stupid mistake from me.
Thank you for trying to help me mate. Forum mods can close this thread now. Thanks all.
problem
i have too but with A/L
Mod Edit :- Content Removed & Thread Closed
N920i
Hi can you send a link to the combination firmware for the galaxy note 5 N920i and can i use odin to bypass the gmail account verification. ?? If so do i just follow the same steps as above. Thanks in advance
n920i
Suegrandi said:
Hi can you send a link to the combination firmware for the galaxy note 5 N920i and can i use odin to bypass the gmail account verification. ?? If so do i just follow the same steps as above. Thanks in advance
Click to expand...
Click to collapse
hi. me also stuck on model n920i. pls help me with the combination file. tq
n902
Quote:
Originally Posted by Suegrandi
Hi can you send a link to the combination firmware for the galaxy note 5 N920i and can i use odin to bypass the gmail account verification. ?? If so do i just follow the same steps as above. Thanks in advance
hi. me also stuck on model n920i. pls help me with the combination file. tq
n920v
can i use those combination file and stock firmware for n920v ? im also running on 7.0 and its really hard finding files for the n920v
whenever i do this i always get PIT fail?
Hi, basic problem is my note 5 doesnt get detected in any OS even with all the samsung drivers.. (kies, switch, samsung)
I can see from android recovery that it says: 7.0/NRD90M/N920IDVU3CQH2
So i believe I need this: http://www.galaxynote5update.com/galaxy-note-5-sm-n920i-stock-firmware/n920idvu3cqh2/
My questions I guess are:
1. Is it "normal" as the phone is "frp'ed", does it mean it wont get detected by the O/S?
2. IF i was able to have the O/S aware of my phone.. would I just need the "original firmware - as above" OR do I need the firmware + combination rom?
3. Has the "920i" been successfully un-frp'ed.. I cant find anything on the net..
Any guidance would be greatly appreciated..
Thanks!
My questions I guess are:
1. Is it "normal" as the phone is "frp'ed", does it mean it wont get detected by the O/S?
2. IF i was able to have the O/S aware of my phone.. would I just need the "original firmware - as above" OR do I need the firmware + combination rom?
3. Has the "920i" been successfully un-frp'ed.. I cant find anything on the net..
Any guidance would be greatly appreciated..
----------------------------------------------------------------------------
How did you get on with the 920I frp... do you have a successful method? I am trying to beat the frp on one right now.
Cheers.
Can't find the combination file for SM-N9200
Hey dude can you help with with the combination file for SM-9200 on Android 7.0 again which is a note 5
do you have the files for note 5 duos N9208? and also how do i enable the adb if my phone is already locked i cant even access the settings
sm-n920k
Hy! i cant find conbination firmware to my SM-N920K...
can you send a link or te file?
Thank YOU!
Hello. I cant find combination firmware to SM-N920S.
Where i can find it? any idea? please help me. Need to remove 'please call me' on SM-N920S.
Thank you.
huntingsec999 said:
can i use those combination file and stock firmware for n920v ? im also running on 7.0 and its really hard finding files for the n920v
Click to expand...
Click to collapse
you can't use firmware until its matching with your device firmware code, Put your device in android recovery mode, after that check your device firmware code there and then search out exact combination firmware, and the official stock firmware that can easily be found on samsung official website sammobile
Combination file n920p
Does anyone have the n920p combination file? I've been trying to find it for days. Any help would be greatly appreciated.
Thank you
hi guys
i bought a used j7 pro so i found it on nougat so i just download official rom on pie and install it with odin but after that the touch stop working i try to downgrade to oreo the same after downgrade the logo became(samsung j7 not samsung j7 pro ) now any rom i iinstall it fail on odin i just want android 9pie or costum rom with fix touch i search on youtube many sites without results please help and when i bring it to repaire shop he says that the screen is changed before ok any help knew that j730fxxu5csg2
thanks
it will fix
hi , don`t worry
1-you flashed a wrong firmware on your device. it happens sometimes!
2-if you are not sure about your screen touch , only thing you have to do is flash a combination file , than test your screen touch.
3-if in odin you face with any fail error,than we should know which part is.give us picture!
4-if error appears at the beginning of process than it related to PIT file.
good luck
NOTE:get the combination file for J7 PRO , not j7.
i.daniyal said:
hi , don`t worry
1-you flashed a wrong firmware on your device. it happens sometimes!
2-if you are not sure about your screen touch , only thing you have to do is flash a combination file , than test your screen touch.
3-if in odin you face with any fail error,than we should know which part is.give us picture!
4-if error appears at the beginning of process than it related to PIT file.
good luck
NOTE:get the combination file for J7 PRO , not j7.
Click to expand...
Click to collapse
hi thank you sir to reply me but the problem is not in the firmware
1-i try the official and it done with odin j730fxxu6 android pie after that also the touch dont work ok
2-i try combination file and the touch work no problem
3-i found on youtube a fixed touch file using twrp but is for j730gm anroid 7.0 i tried it it succes with twrp but the problem is maybe each 1 hours stop the phone and run again also there is no network i think because is not the same model
--> my problem is i need a fix touch file for my model j730fxxu6 android pie i try to downgrade but always fail because all of file of downgrade on binary 4 ,3 , 2 , 1 i dont find one of u6 can you help please i found file of u6 in website called halabtech but is paid also not haven the same ways to pay im in trouble if i give it to shop repair it demande to change all the screen is about 150dollar
http://ftp.needromarab.com/7800/J730F-J730FD-Fix-Touch-Android-9-0-Binary-U5-Under-Test-
but its u5!!!you can`t downgrade your binary!!!
you have to downgrade your modem to fix it!i serf the net a lot !but i can`t find one.sorry
i.daniyal said:
http://ftp.needromarab.com/7800/J730F-J730FD-Fix-Touch-Android-9-0-Binary-U5-Under-Test-
but its u5!!!you can`t downgrade your binary!!!
you have to downgrade your modem to fix it!i serf the net a lot !but i can`t find one.sorry
Click to expand...
Click to collapse
i dont know how but the binary is changed form u5 to u6
only thing you can do is wait for u6 fix file!!!
or u can take ur fon to a mobile repair! EFT dongle may help!
I'm searching the android 10 stock Rom for my Xcover Fieldpro for rooting. I was unable to find it on internet and with samfirm tool.
The phone model is SM-g889YB.
I try reach Samsung support but they don't want share the Rom.
Thanks in advance.
What's the build number? I'll try to locate it, I found my stock firmware on a odd website, but it was legit. Had to pay for it.
OperationA7X said:
What's the build number? I'll try to locate it, I found my stock firmware on a odd website, but it was legit. Had to pay for it.
Click to expand...
Click to collapse
g889ybxxu2bub2
thanks in advance
hai trovato qualcosa?
Have got issue with GPS and NFC on the device. The only way is to try to reflash. But there is no firmware anywhere.
Now have on the board G889AUCS7CUF1. I've asked Samsung tech.support for help, but got nothing.
Even didn't get success entering in recovery mode. Power button + volume down doesn't work.
What is wrong with this model?
I want this smartphone, who can sell it?
aint a9 the latest version on all G889 versions?