Database Info

[Thread doubts] OnePlus 7 chinese version [GM1900]

Hi guys, I open this thread to solve problems / doubts of this chinese version of One Plus 7 GM1900 because I guess many will be in my place.
I tell you my case:
My intention is to open bootloader to be able to put custom recovery TWRP and root it with Magisk.
Once I have it, I have doubts:
1. If I want to remove TWRP and Root, and I will leave all stock, what steps should I take?
2. If I am in OOS (for example 9.5.2) with TWRP and root and want to upgrade to a new version of OOS (for example 9.5.6), what steps do I have to follow?
3. I would like to know if this is true, and if so, what would be the solution: I have read that when a Wipe System is made from Twrp, the bootloader can be closed or that the phone does not start in fastboot mode causing a crash. Is this true?. I thought about when I wanted to install a cleaner ROM stock, make a Wipe System, data, cache and dalvik and then flash the rom, and according to that it might not be possible.
Thank you.

Hi, are these Treble GSI roms compatible with the OnePlus 7 (not pro) Chinese version GM 1900 ???
Roms Treble GSI:
https://forum.xda-developers.com/project-treble/trebleenabled-device-development

hardware is the same, firmware also fits from EU/Indian devices. next time just use search.

tURkOsANsE said:
1. If I want to remove TWRP and Root, and I will leave all stock, what steps should I take?
Click to expand...
Click to collapse
Flash the stock ROM and reboot. You'll have a phone with stock recovery and ROM with no root access. It won't relock your bootloader though, so you'll have to do it with: fastboot oem lock
2. If I am in OOS (for example 9.5.2) with TWRP and root and want to upgrade to a new version of OOS (for example 9.5.6), what steps do I have to follow?
Click to expand...
Click to collapse
You always need to flash full ROM zips if you're rooted and want to update. However to keep the custom recovery (TWRP), you need to flash the TWRP installer along with the ROM. Then to not lose root access you'll have to reboot to TWRP and flash Magisk. Just follow these steps:
1. Boot to TWRP
2. Flash ROM
3. Flash TWRP installer
4. Reboot to TWRP
5. Flash Magisk
6. Reboot to system
3. I would like to know if this is true, and if so, what would be the solution: I have read that when a Wipe System is made from Twrp, the bootloader can be closed or that the phone does not start in fastboot mode causing a crash. Is this true?. I thought about when I wanted to install a cleaner ROM stock, make a Wipe System, data, cache and dalvik and then flash the rom, and according to that it might not be possible.
Click to expand...
Click to collapse
I haven't tried that yet. But since TWRP builds are official, I don't think there are bugs like that. Why don't you give it a try and let us all know?

@dewri21 Thank you very much for your answers, you have helped me a lot, thank you for your clear explanations, please like this, help those who are starting in this world.
dewri21 said:
I haven't tried that yet. But since TWRP builds are official, I don't think there are bugs like that. Why don't you give it a try and let us all know?
Click to expand...
Click to collapse
Hehehehe I dare not do it, I could run out of mobile phone and end up with a brick. At the moment if I want to put clean OOS I think I will use Fastboot mode. Let's see if a partner who knows how to get out of a brick does Wipe Sistem and confirms that.

FASTBOOT: https://forum.xda-developers.com/oneplus-7/how-to/rom-stock-fastboot-roms-oneplus-7-t3937478
Hi guys, I am writing to let you know that I have flashed the fastboot 9.5.6 BA ROM in my OnePlus 7 Chinese version GM 1900 and it worked perfectly. I was in TWRP, Root Margisk and Custom Kernel, and now I'm back in Stock. My device being a Chinese version came with ROM AA when removed from the box, and I confirm that the BA version can also be set up by Fastboot.
Add that as it is said, the first restart is slow, it stays a while in the warning screen of bootloader open, but it advances with the start. In my case I have not had to restore factory.
Very happy with this method to be able to return to Stock.

Hello, has anyone tried this on our OnePlus 7 to fix a brick? It seems that it is the MsMdonwloadsTools for our OnePlus 7. Someone who has a brick can try it and tell us if it works.
https://repairmymobile.in/flash/oneplus-7-flash-file/amp/

MsmDownloadTool For OnePLus 7: https://forum.xda-developers.com/oneplus-7/how-to/unbrick-tool-oneplus-7-msmtool-hydrogen-t3953240

[GM-1910 OP7PRO] Reset everything back to Oxygen OS ( Help:( )

Hey I was experiencing some display issues so I flashed a custom ROM to test / narrow the problem (hardware issue sadly).
—Now I'm not sure how to revert back to completely stock as I've never unlocked the bootloader and worked much with fastboot.
On Samsung's you just download the official stock file, get Odin and put the file into AP, flash, done.
On one plus this is a bit different, first of all there's barely any mentioning of GM-1910 in the MSMDownloaderTool thread(s), I also don't want to have Hydrogen OS.
—My OP7Pro came with Oxygen OS pre-installed, GM1910 "international version" ← def. Chinese with oxygen flashed over it.
*What have you altered so far?*
Unlocked Bootloader/OEM
Flashed TWRP with fastboot
Flashed Havoc 3.0 OS, Magisk, OpenGapps
My perspective on the nature of special relativity.
*What do I want to reset?*
EVERYTHING, ROM, recovery, bootloader, you name it, I don't care about apps and pictures. worth noting I have a One plus Switch Backup, does that help?

Look for the MSM tool... that can reset the phone completely back to stock.

UpdateYourBrowser said:
Hey I was experiencing some display issues so I flashed a custom ROM to test / narrow the problem (hardware issue sadly).
—Now I'm not sure how to revert back to completely stock as I've never unlocked the bootloader and worked much with fastboot.
On Samsung's you just download the official stock file, get Odin and put the file into AP, flash, done.
On one plus this is a bit different, first of all there's barely any mentioning of GM-1910 in the MSMDownloaderTool thread(s), I also don't want to have Hydrogen OS.
—My OP7Pro came with Oxygen OS pre-installed, GM1910 "international version" ← def. Chinese with oxygen flashed over it.
*What have you altered so far?*
Unlocked Bootloader/OEM
Flashed TWRP with fastboot
Flashed Havoc 3.0 OS, Magisk, OpenGapps
My perspective on the nature of special relativity.
*What do I want to reset?*
EVERYTHING, ROM, recovery, bootloader, you name it, I don't care about apps and pictures. worth noting I have a One plus Switch Backup, does that help?
Click to expand...
Click to collapse
You can use the fastboot ROM or Guac (MSM tool for oxygen OS). Links below:
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
or
https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
Good luck!!

Gr8man001 said:
You can use the fastboot ROM or Guac (MSM tool for oxygen OS). Links below:
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
or
https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
Good luck!!
Click to expand...
Click to collapse
excuse my stupidity but given that I want to get rid of my custom ROM and back to stock oxygen which tool do I have to use?
secondly all images (androidfilehost) for the second link are for GM1911,17,13,15 but mine is 1910 which is not listed, what do I do now?

UpdateYourBrowser said:
excuse my stupidity but given that I want to get rid of my custom ROM and back to stock oxygen which tool do I have to use?
secondly all images (androidfilehost) for the second link are for GM1911,17,13,15 but mine is 1910 which is not listed, what do I do now?
Click to expand...
Click to collapse
I am sorry but I am not familiar with Chinese stock ROMs. For some reason, I got the impression that you wanted to restore it to an international version and not the Chinese/HK version. You may want to post a question in the OnePlus community forum or check out their download section for your specific model.
https://forums.oneplus.com/forums/oneplus-7pro-support/

Gr8man001 said:
I am sorry but I am not familiar with Chinese stock ROMs. For some reason, I got the impression that you wanted to restore it to an international version and not the Chinese/HK version. You may want to post a question in the OnePlus community forum or check out their download section for your specific model.
https://forums.oneplus.com/forums/oneplus-7pro-support/
Click to expand...
Click to collapse
no no I want to restore it to international version, the phone itself is GM1910. should I flash GM21AA file or the global file?
I think I will go with the global file, makes most sense in this moment

UpdateYourBrowser said:
no no I want to restore it to international version, the phone itself is GM1910. should I flash GM21AA file or the global file?
I think I will go with the global file, makes most sense in this moment
Click to expand...
Click to collapse
GM21AA should be fine. If you decided to use the MSM tool (the one in the first link), hardest part is to get the L2/qualcomm drivers installed on your PC with the method described. Alternatively you can download and install the drivers yourself which will make the job easier. This will LOCK your bootloader and wipe off everything on your phone. You will get a brand new phone running 10.0.3 OS
Easiet way would be to go fastboot ROM route. It will also wipe your phone but won't lock the bootloader. Once installation is complete you could use the adb command to lock the bootloader. It's one extra step but may be much easier IMO. Download the zip file on PC>unzip it>Hit flash all bat file while the phone is connected in the fastboot mode. You may get some error messages regarding header parsing, ignore them and sit tight until your phone boots.
Good luck!!

WORKS NOW! Can confirm this reverts all back to stock (it will revert back to Oxygen OS (OOS) 9.5 so you'll have to update to Android 10 via OTA if you want)
For anyone wondering, I had Android 10 installed before / Havoc 3.0 and the MSMTool will revert you back to Oxygen OS 9.5. Widevine jumped back to L1 so everything should be stock.
If you have any questions, don't wait, I am sure someone out there had the same questions/issue as me and I hope this will help you.
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691

UpdateYourBrowser said:
WORKS NOW! Can confirm this reverts all back to stock (it will revert back to Oxygen OS (OOS) 9.5 so you'll have to update to Android 10 via OTA if you want)
For anyone wondering, I had Android 10 installed before / Havoc 3.0 and the MSMTool will revert you back to Oxygen OS 9.5. Widevine jumped back to L1 so everything should be stock.
If you have any questions, don't wait, I am sure someone out there had the same questions/issue as me and I hope this will help you.
https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691
Click to expand...
Click to collapse
Hey, I have a problem, I re-locked the bootloader, it is currently blocked, but my Widevine status is still L3, can you tell me if you used MsmTool first and then you did relock, or did you block the bootloader first?

Roll back to Stock MIUI Rom

Hello, anyone here can help me roll back to stock miui Rom, i tried flashing it through twrp, it gives error 0007 never works, currently i am on custom Rom since there is not much developmemt here, i installed one custom Rom battery backup and performance is not good also i could only try some of them i could not try all of them same reason could not install, now i am stuck on a custom Rom....please any help suggestion to roll back to Stock Miui Rom, i have indian unit Poco x2.
Thank you

KartikManish said:
Hello, anyone here can help me roll back to stock miui Rom, i tried flashing it through twrp, it gives error 0007 never works, currently i am on custom Rom since there is not much developmemt here, i installed one custom Rom battery backup and performance is not good also i could only try some of them i could not try all of them same reason could not install, now i am stuck on a custom Rom....please any help suggestion to roll back to Stock Miui Rom, i have indian unit Poco x2.
Thank you
Click to expand...
Click to collapse
Download the pocox2 fasboot images and flash it through miflash tool!

download fastboot images from https://mifirm.net/model/phoenix.ttt for indian variant .
put your phone in fastbboot mode
flash through mi flash or through scripts in the extracted folder in windows or linux.

Just tried it error
i.snehal.kiran said:
download fastboot images from https://mifirm.net/model/phoenix.ttt for indian variant .
put your phone in fastbboot mode
flash through mi flash or through scripts in the extracted folder in windows or linux.
Click to expand...
Click to collapse
I just tried it showing error
Status showing " antirollback check error"

KartikManish said:
I just tried it showing error
Status showing " antirollback check error"
Click to expand...
Click to collapse
so must be on higher version of miui firmware.
you should get that version of miui stock rom images and flash them

i.snehal.kiran said:
so must be on higher version of miui firmware.
you should get that version of miui stock rom images and flash them
Click to expand...
Click to collapse
I am on a custom Rom, not on any miui higher version have to roll back from custom to Stock miui...

KartikManish said:
I am on a custom Rom, not on any miui higher version have to roll back from custom to Stock miui...
Click to expand...
Click to collapse
no no you dont understand.
what was your firmware when you are on custom rom???
you have to flash that exact firmware containing fastboot images .
May be you are trying to install stock firmware which is lower version than installed firmware.

Hey dude, I get your problem. I'm facing the same problem myself! Unless you get the "Fastboot images" of miui 12, which will take another 1 month to come, you have to be on custom rom only. You cannot go back to stock rom.
That's why I flashed Bootleggers today. EvoX has bugs, but bootleggers feels smooth. If you really want a dependable rom, I'd suggest, EU MIUI, which you can flash directly over TWRP or else Bootleggers.
Until then, let's wait for the month end to get the fastboot images

i.snehal.kiran said:
no no you dont understand.
what was your firmware when you are on custom rom???
you have to flash that exact firmware containing fastboot images .
May be you are trying to install stock firmware which is lower version than installed firmware.
Click to expand...
Click to collapse
Okay i tried it same error again.... Not sure whats wrong here... Anyways thank you for your help.

superminnu said:
Hey dude, I get your problem. I'm facing the same problem myself! Unless you get the "Fastboot images" of miui 12, which will take another 1 month to come, you have to be on custom rom only. You cannot go back to stock rom.
That's why I flashed Bootleggers today. EvoX has bugs, but bootleggers feels smooth. If you really want a dependable rom, I'd suggest, EU MIUI, which you can flash directly over TWRP or else Bootleggers.
Until then, let's wait for the month end to get the fastboot images
Click to expand...
Click to collapse
Yeah i am on EvoX will try Bootleggers or EU MiUi and wait for miui 12 letme know when you do it, did it work, thank you...

KartikManish said:
Yeah i am on EvoX will try Bootleggers or EU MiUi and wait for miui 12 letme know when you do it, did it work, thank you...
Click to expand...
Click to collapse
Yes, let's wait for a month, until then happy playing with custom roms

KartikManish said:
Hello, anyone here can help me roll back to stock miui Rom, i tried flashing it through twrp, it gives error 0007 never works, currently i am on custom Rom since there is not much developmemt here, i installed one custom Rom battery backup and performance is not good also i could only try some of them i could not try all of them same reason could not install, now i am stuck on a custom Rom....please any help suggestion to roll back to Stock Miui Rom, i have indian unit Poco x2.
Thank you
Click to expand...
Click to collapse
Unzip stock rom and edit updater-script. Replace this word phoenixin to phoenix , then repack all files and flash.

Back to stock ?

Hello peeps,
My question is when we unlock boot loader and install stock rom after installing any custom rom, is it totally back to stock or there any perks? Like widevine L1, L3 i was reading somewhere and what about furthur OTAs. I haven't unlocked by mobile's bootloader and i intend to install pixel experience so will i be able to come back and enjoy RUI 2.0?
Also any comments on pixel experience rom from daily user experience vs rui 1.0?
and can anybody please refer to me to guide returning to stock rom please ?
Thanks

Easy way to back stock is flash realme ui 1 by twrpthis can be done at any stage ie. from colour os or from custom.if use fastboot method and flash android 9 colour os,you can use rom only after one or two update

adamnp2000 said:
Easy way to back stock is flash realme ui 1 by twrpthis can be done at any stage ie. from colour os or from custom.if use fastboot method and flash android 9 colour os,you can use rom only after one or two update
Click to expand...
Click to collapse
And what is the procedure to go back to stock via twrp?

Flash same like custom rom using twrp.

Android 11 Red Magic Rom [FLASHGUIDE]

Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool

Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!

nalin_s3 said:
Thanks for the update.
I have been planning to upgrade my Red Magic 3 to Android 10 (CN rom) for quite a while now. And its good to know A11 beta has arrived too.
Have you tried fps games on this device like pubg mobile, cod etc? Do they work properly ?
Also, I haven't even unlocked bootloader on my device. Can you proivde a better guide, to completely switch from global rom (stock) to A11 (beta) or A10 CN rom (stable).
Need links / guide for following items -
- Unlock bootloader
- Link of working twrp and steps to flash (should I change recovery after installing this beta?)
- Gapps and Magisk link (As I can't run this device without Google services).
It will be a huge help for me to get started.
Take your time with it (no rush).
Thanks in advance!!!
Click to expand...
Click to collapse
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!

Perseo99 said:
Hey!
No problem at all. I let you here two guides to migrate to the cn rom and even a gsi
Be careful and aware about what you are going to do, It's not specially difficult but you have to get ready all the files and tools in case of brick or bootloops.
Enjoy the flashing!
Click to expand...
Click to collapse
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ??

nalin_s3 said:
Thanks for the links. I am planning to update to stable A10 version for now.
I have few questions it be a huge help you could clear some of my doubts -
1. After unlocking bootloader I have to install TWRP (for gapps to run). So should I install TWRP after flashing CN rom ? or before ?
I am asking this because I read in some guides that only CN rom is custom recovery capable.
2. If you have run A10 stables before, does OTA updates require to be installed via TWRP only ?
Will I loose Gapps and Root access if I updated the ota directly from settings? And will every rom flash with TWRP clear my installed apps ?
Thanks in advance for helping!!. ?
Click to expand...
Click to collapse
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.

Perseo99 said:
Hello again!
I saw a post where leipnacht provides a link to the public beta of Android R. (I let you here a drive link to download it faster).
I flashed it and it's working properly on my device. There is some bugs, but the most part of the things works without problems (Personally, I didn't face any bug itself (only a low noise with the vibration by the moment), but there are some comments in the page of bbs nubia about some problems with other things.
The previous conditions from where I update to Android R Red Magic Rom were using a GSI in the Android 10 chinese version of the rom. So, the steps I followed are:
1. In the recovery, wipe data, cache and dalvik. Also, format data.
2. Flash in the Android 10 TWRP the Android R rom.
3. Flash this NikGapps Package , Magisk Debug and DFE (Encrypt disabler in order to be able decrypt data in the recovery). I also flashed Permissive_5 but I think there is no need to do it.
4. Boot and enjoy.
I will attach all the files and some screenshots for those who want to take a see to the rom. Personally, I feel no changes in this version, but, as always, the performance is great and it runs really smooth. It's a beta version, so I hope more changes in the future.
P.D. In order to get safetynet passing, I used HideProps Config magisk module. There is no big issues with it, and everything is fixable
P.d.2. This rom has antiroll-back active, so if you want to go back to previous version, you will have to use the unbrick tool
Click to expand...
Click to collapse
Can you check your pm??

There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool

jepoyxxv said:
There's no problem in flashing but take note there's no going back i mean you cant downgrade it anymore using unbric tool even if you flash rom using cmd it will not work my rm3s now is bricked theres no tool or method that can fix it right now. Unless someone make a new unbrick tool
Click to expand...
Click to collapse
I already went to 11 and flash to 3.11

But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me

jepoyxxv said:
But how did you flash android 10 3.11 in rm3s no matter what tool i use i cant fix my rm3s from being bricked by flashing android 11 beta can you tell me what did you do did you flash it manually in command prompt please help me
Click to expand...
Click to collapse
If you are in 11 beta and want to downgrade..just simple flash global version and again flash 3.11 done

What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.

jepoyxxv said:
What did you use to flash global rom lastweek i successfully installed android 11 beta and use unbrick tool to go back to global but i got bricked. And i cant fix it anymore.
Click to expand...
Click to collapse
I just flash global from otg and tham again 3.11

walkwitmeinhel said:
I just flash global from otg and tham again 3.11
Click to expand...
Click to collapse
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.

[email protected] said:
Could you please tell me where to download the 3.11 rom. I am not aware that this rom exists. Is this a CN or global rom? Thanks for your reply.
Click to expand...
Click to collapse
http://ui.nubia.cn/rom/detail/64

Oh! Didn't expect that. I just post this for Red Magic 3 device users. I don't know how RM3S actually works. Have you tried the unbrick tool from chinese version? Or just flashing the global rom from recovery is enough?

Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...

jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
Let's see. Here is a link for Red Magic 3S unbrick tool. Download the non-eu ones.
If you have a Red Magic 3 with Red Magic 3s software, I will provide you the link to the other unbrick tool.
Also, you can try flashing the global rom from the stock recovery included in the package of the A11 rom that you have download.

Thanks for replying my bro.. my device is rm3s i already use rm3 and rm3s unbrick tool.. downloading fire hose programmer and image was successfully but.. my phone is still corrupted... And one thingg i dont have twrp install in my rm3s thats why its hard for me to fix it.. can you please guide or teach me how to flash stock recovery using global rom i know how to use cmd and adb

jepoyxxv said:
Wait is there a chinese unbrick tool cn. version for red magic can you provide me a link.. unbrick tool 3/3s.global by jerry is not working anymore if you got brick by android 11 beta rom...
Click to expand...
Click to collapse
So then, It's not a problem of the unbrick tool, that is actually working properly. The thing is that you didn't know how to do a correct process to migrate from cm rom to global...
The first thing you should do is reboot the phone into fastboot mode (power+vol. Down). Then, connect the phone to the PC and type the next commands in the cmd:
Code:
fastboot devices
in order to see if your device is being recognized
Code:
fastboot oem nubia_unlock NUBIA_NX629J
to unlock the bootloader
Code:
fastboot flashing unlock
in order to make your phone able to boot with a modified software. In the moment you will enter this command, you will see a screen advising you about your data (it'll be erased once you accept to unlock flashing).
After that, you can reboot your phone, that will show you an screen advising you that the bootloader is open. Accept and continue without problems.
Tell me if you have been able to make your phone boot.

Perseo99 said:
Well, I will go in order:
1. You have to flash first in the stock recovery the Android 10 CN rom and then flash the custom recovery. There is no twrp avaible for global rom. Once in the custom recovery, you can flash Gapps and Magisk (in android 10 there is no need of DFE file, the recovery is able to decrypt data properly.
2. You don't need to get worried about OTAs, there is no a constant software update work by nubia for this device, but in case of update, you would flash the rom from the offcial page, with magisk and gapps again and be sure you keep the custom recovery.
Click to expand...
Click to collapse
Required in CN A10 + twrp A10, or maybe from CN A9 + twrp A9 to be able to flash