Database Info

[Q] Proper Infuse SetCPU settings and voltages.

Ok I'm kinda new to the whole overclocking thing and I was wondering what are the best settings to use if I wanted to(for instance) save more of my battery. I've done quite a bit of searching but I wanted to make sure that the voltage settings aren't different on different ROMS or phones. I'm on Zeus V3 for the record. Any help would be greatly appreciated! Thanks for your time.

Stable settings definitely vary from phone to phone unfortunately, even if they are the same device. So basically its trial and error, no matter what anybody suggests. Generally, the more you can undervolt and stay stable, the better battery life you will have. You're just going to have to experiment a bit, and just make sure you don't save any settings as boot settings until you know they are stable. I know there is a guide to overclocking somewhere on the forums, I just hate searching on my phone.
Quick tips, start with only moderate undervolting, and crank them down gradually until your phone is at the limit of stable to maximize battery life. Use the 'stability test' app in the market to test for stability. Also, running other benchmarks, such as neocore or quadrant, without freezing is a good test.
Hope I helped!
PS, I've come to the realization that it all doesn't make THAT huge of a difference, and if you switch roms anywhere as frequently as me, its a waste of time. Not to discourage you, just my two cents. If you like to pick a rom and stick with it, then definitely play with it.
*edit* Got on my computer and found the guide for you:
http://forum.xda-developers.com/showthread.php?t=1036020
Obviously, since the guide is based on a captivate, the values you will end up with will be different, but he explains the process of fine tuning very well. Enjoy!
Sent from my SGH-I997 using xda premium

what i do with all my ROMs is put it from 100 mhz (min) - 1600 mhz (max)
and put the governor to "ondemand"
i usually get about 18 hours on battery life a day.
give it a shot doesnt hurt to test it out cause you could always charge your battery haha

[Q] Battery after rooting

Will I get better battery life after using CFautroot?
And what is the success rate for first time users? (chances of screwing up my phone)...
thanks!

saabage said:
Will I get better battery life after using CFautroot?
And what is the success rate for first time users? (chances of screwing up my phone)...
thanks!
Click to expand...
Click to collapse
Only the things you do after rooting can have a good/bad effect on battery life.
Rooting will do absolutely nothing except maybe a placebo.
Success rate only depends on circumstances such as accidentally removing usb cable during operation.
Otherwise if your phone model is supported then it should work 100% of the time.

Lgrootnoob is right, the success rate only depends if there is a problem with your device such as not connecting to the computer right pulling the cable, your antivirus might jump at the programs you get from here, as for your battery, it depends on what you do, if you want to overclock your phone (make it faster) it will decrease battery life depending how much you use increase it. i would get the App Performance controller when you root your device but only if your willing to do a little research into governors and i/o schedulers you can find which ones you want and get tons better battery performance.

Power Users: Post Your Optimal Setup!

This thread is intended to have power users post their best configurations so as to guide the rookies in optimizing their MXPs once they get unlocked and rooted. It's also intended to compare the best setups for battery, performance, gaming, multitasking, etc.
My main interest is in battery life, although lately I've been on the XDA Labs app like crazy and it's hurting my drain.
Constructive criticism welcome on how to improve the below records!
ROM: Stock MM Canadian
Kernel: Ultra Kernel R3
Governor: Smartmax
Frequencies: 200 big, 800 little
Xposed Framework modules: Force Fast Scroll, Lucky Patcher, GravityBox (duh!), Use USB For Marshmallow, Xposed GEL Settings
Best SOT: 8 hours
Best Drain (100% to 0%): 120 hours
Other miscellaneous tweaks: Shake Flashlight as a system app instead of double-chop (works great, just don't let go)
Launcher: Still figuring that out...but Nova and DarkLauncher are worthy contenders right at the moment
Voice Assist/Google Now on long-press Home: Disabled thanks to @pijes. Settings > Apps > Gear icon > Default Apps > Voice and Assist > None
Post below, power users! What's your best setup so far?

Bro, I would like you use Greenify and DS Battery saver
As you have xposed framework installed you can use boost mode in greenify and also
DS Battery saver also has a module so activate them and then choose slumberer and phew see your battery stats
Coming to launcher, right now Arrow launcher is good and smooth and I prefer that
Thank you!

ashwath230 said:
Bro, I would like you use Greenify and DS Battery saver
As you have xposed framework installed you can use boost mode in greenify and also
DS Battery saver also has a module so activate them and then choose slumberer and phew see your battery stats
Coming to launcher, right now Arrow launcher is good and smooth and I prefer that
Thank you!
Click to expand...
Click to collapse
Cool man thanks. I'll try the Greenify and DS you recommend. I've seen Greenify a lot around XDA. I'm excited to try it.

Tesla rom(seems faster/smoother then stock/anyother rom) plus Squid kernel. Governor is set to Lionfish and I/O scheduler is set to Row with 512kb readahead. Minimum frequency for the Big cluster is 800mhz and 499mhz for the little cluster. NFC and location disabled. Best battery life I ever got was with stock with the same kernel/settings configuration, had 9 hrs SOT and nearly 24 hrs overall.

xtremeed2705 said:
Tesla rom(seems faster/smoother then stock/anyother rom) plus Squid kernel. Governor is set to Lionfish and I/O scheduler is set to Row with 512kb readahead. Minimum frequency for the Big cluster is 800mhz and 499mhz for the little cluster. NFC and location disabled. Best battery life I ever got was with stock with the same kernel/settings configuration, had 9 hrs SOT and nearly 24 hrs overall.
Click to expand...
Click to collapse
What do you mean nearly 24 hours overall - how long before you had to recharge?
I need to learn more about I/O scheduling. I've changed to Row and 512 as you recommend but where will I see the difference? When I connect to my PC? When apps access internal storage?
I've changed my governor back to lionfish. Smartmax wasn't doing it for me. 200 big 800 little. I'll look into that Tesla ROM too.
I was hoping this thread was gonna be more popular. I hope some people have gotten use out of it so far! Grow little thread, grow!

It would be awesome to see more growth in this thread! It would enable prospective buyers to talk to current owners, and figure out what they might want before they sink money into the device!
*cough*cough*
Which is exactly what I was hoping to do! Does anyone know if sweep to wake/sleep is possible with the Moto X Play? It's honestly one of the most useful features I've ever seen from rooting et al.

I'll post my setup. Been using it this way for like 2 weeks so I feel it's stable.
I'm currently running this:
Unlocked BL obviously
Stock Canada firmware (MPD24.65-18)
Rooted
Xposed Framework installed
Squid Kernel r14b
I have gravity box installed and that's really it as far as tweaks and stuff.
Averaging 5 or 6 hours SOT down to about 25% or 30%. Really depends on what I do and what network I use. Performance is great too.
I'm gonna mess around with some of this stuff tonight and see what I can do with it.
Sent from my XT1563 using Tapatalk

I'm trying the interactive governor in Squids kernel, some of the stuttering issues have disappeared. Like when I clear all recents in the task switcher screen or scrolling big web pages.
Sent from my XT1563 using Tapatalk

Marshmalux. Rooted. Xposed. Greenify. Powernap. Amplify.
Getting sot around 5.5 hours for my usage. Happy with that squid kernel latest r15. Lionfish on both cores
Sent from my XT1563 using Tapatalk

JohnHorus said:
It would be awesome to see more growth in this thread! It would enable prospective buyers to talk to current owners, and figure out what they might want before they sink money into the device!
*cough*cough*
Which is exactly what I was hoping to do! Does anyone know if sweep to wake/sleep is possible with the Moto X Play? It's honestly one of the most useful features I've ever seen from rooting et al.
Click to expand...
Click to collapse
Hey hey. Thanks for posting!
I'm sure sweep to wake is possible on the phone in some way, likely through a combination of rooting and Xposed modules. I know that GravityBox has a double tap on status bar to sleep feature.
One of the nicest features of the X Play is the Moto Display. It's nice to have the phone screen come.on showing notifications without fully waking the phone. Check out the Moto Display app on the Play Store. It's a totally sexy feature.
I'd say this phone is absolutely worth it for the battery alone. I personally feel the camera to be laggy especially with focus, so consider that if you're a shutterbug. I am very hopeful that software updates will being out the power of the camera but it doesn't have optical image stabilization so blir happens more frequently, at least for me. That could be my shake fingers though.
Feel free to ask any further questions!

brian10161 said:
I'm trying the interactive governor in Squids kernel, some of the stuttering issues have disappeared. Like when I clear all recents in the task switcher screen or scrolling big web pages.
Sent from my XT1563 using Tapatalk
Click to expand...
Click to collapse
Good stuff. Interactive does appear to handle web pages better. I did a Wikipedia search for The Simpsons and got a huge page. I flicked down to scroll it all at once and then Chrome froze. Hahahaba. Same with Lionfish though. Maybe I'm getting greedy thinking this phone is as powerful as my PC.
Lionfish was giving me great SOT results. Like I mentored in the OP: 8 HOURS! Was so happy to see that. Blew the socks off my Nrxus 4. I average between 6.5 and 8 usually, but WhatsApp and XDA Labs are hurting those scores now.
I haven't had to Greenify any apps yet - I only hsvr geeky ones installed anyway so they never keep the phone awake.

Gopinath15 said:
Marshmalux. Rooted. Xposed. Greenify. Powernap. Amplify.
Getting sot around 5.5 hours for my usage. Happy with that squid kernel latest r15. Lionfish on both cores
Sent from my XT1563 using Tapatalk
Click to expand...
Click to collapse
I think @squid2 deserves a lot of credit for extending the X Play even further. His kernel and work on TWRP make the X Play even more attractive than it is out of the box.
I prefer Ultra kernel personally because I believe the dev for that (@technoander) takes the latest releases of squid's and adds features to them. I may be mistaken but that's my impression. I'll try to clarify and report back. I should do a direct comparison of Ultra and squid's latest to be as objective as is possible with a subjective test. Hahaha.

I guess I should specify a bit further - sweep/tap2wake is really only effectively useful when the phone supports some kind of low-power state for the touchscreen, otherwise the screen has to remain on in order to use it.
I'm sure sweep2sleep would be possible, but if there's no low-power state for the screen, it wouldn't really matter for me in the end. Moto display sounds like exactly what I'm talking about, though I don't know if it includes any low power mode for the touch features, as well as the display.
I'm gonna look into this a bit more, and see if I can dig up any info. It would be a hardware feature, designed-in, so it definitely should be discoverable. I figure if I can find out all the information for one of the people who have written kernels for the phone, they shouldn't have a problem emulating the feature. It's popular enough, and with the low-power state, shouldn't be too complex to implement.

JohnHorus said:
I guess I should specify a bit further - sweep/tap2wake is really only effectively useful when the phone supports some kind of low-power state for the touchscreen, otherwise the screen has to remain on in order to use it.
I'm sure sweep2sleep would be possible, but if there's no low-power state for the screen, it wouldn't really matter for me in the end. Moto display sounds like exactly what I'm talking about, though I don't know if it includes any low power mode for the touch features, as well as the display.
I'm gonna look into this a bit more, and see if I can dig up any info. It would be a hardware feature, designed-in, so it definitely should be discoverable. I figure if I can find out all the information for one of the people who have written kernels for the phone, they shouldn't have a problem emulating the feature. It's popular enough, and with the low-power state, shouldn't be too complex to implement.
Click to expand...
Click to collapse
Cool - definitely report back - it would be nice to know if this is embedded in the hardware somewhere. I hope it is, unlike optical.image stabilization. Damn!

XxMikeMasterxX said:
What do you mean nearly 24 hours overall - how long before you had to recharge?
I need to learn more about I/O scheduling. I've changed to Row and 512 as you recommend but where will I see the difference? When I connect to my PC? When apps access internal storage?
I've changed my governor back to lionfish. Smartmax wasn't doing it for me. 200 big 800 little. I'll look into that Tesla ROM too.
I was hoping this thread was gonna be more popular. I hope some people have gotten use out of it so far! Grow little thread, grow!
Click to expand...
Click to collapse
Yes nearly 24 hrs before I had to recharge. As for Row you should notice it with both situations. I use it because of other phones I had before people were saying it was one of the better I/O schedulers.
Actually I have a picture of when I got it. Was nearly 23 hrs not 24 but still.

Hey developer,the banking apps I have does run after flashing a custom rom.Is there any workaround for this?.have to reflash stock after trying any custom rom.Its a pain in the as*.

xtremeed2705 said:
Yes nearly 24 hrs before I had to recharge. As for Row you should notice it with both situations. I use it because of other phones I had before people were saying it was one of the better I/O schedulers.
Actually I have a picture of when I got it. Was nearly 23 hrs not 24 but still.
Click to expand...
Click to collapse
Row is essentially the best scheduler. Benchmarking is weird, because by design it's an optimized test case and not a use case. Use cases will always be variable, but generally with a smartphone writes aren't too latency-sensitive. That's why Read Over Write generally works the best once your phone is settled, because reading is most of what it does. Doesn't write too often.
There are lots of custom governors, not so many custom schedulers, and lots of suggestions, but generally stock *IS* best, and if you don't understand it, you should not change it. Governors are fun to play with but even they can cause issues if poorly coded. Changing governors will give you a huge impact on battery, but also a relative impact on performance. It all depends on the use context. You'll rarely get much battery life without a performance hit unless you custom-tune settings for your own use context.
As for read-ahead, that value is iconic of exactly what I'm talking about. It is the "chunks" of data that your OS reads in one go. So if it needs 2k, or 2m, it reads a different number of chunks, but each chunk will be the size set by I/O read-ahead. Google likes 512 best. I've been told by the dev for the EX Kernel that internal Motorola devs like 128 best. Benchmarks like the biggest value possible, because they present the OS a massive pile of data and ask it to read it all as fast as possible. In that context, a large chunk size saves time. In most contexts, you read more than you need half the time. So a low value like 128 saves battery and memory.
---------- Post added at 09:10 AM ---------- Previous post was at 09:08 AM ----------
kiran91 said:
Hey developer,the banking apps I have does run after flashing a custom rom.Is there any workaround for this?.have to reflash stock after trying any custom rom.Its a pain in the as*.
Click to expand...
Click to collapse
Android pay does this too, it's a "security" feature built-in by the devs to stop hacking. Not really necessary, but then neither are smartphones, so you take what you can get I guess. No ROM developer can work around this for you. The app is detecting any modification whatsoever. Even root may cause it.

xtremeed2705 said:
Yes nearly 24 hrs before I had to recharge. As for Row you should notice it with both situations. I use it because of other phones I had before people were saying it was one of the better I/O schedulers.
Actually I have a picture of when I got it. Was nearly 23 hrs not 24 but still.
Click to expand...
Click to collapse
Badass dude. 9 hours SOT is wicked.
I'm finding the phone app drains the battery like crazy. Is this to be expected?

Hey @JohnHorus - thanks for your informative post. I'm currently trying Row 128 and will report back but I doubt I'll see any real-world difference in use. Memory and battery are two soft spots for me so I'm hopeful 128 will maintain solid performance.
Looking forward to reading about others' setups!

XxMikeMasterxX said:
Badass dude. 9 hours SOT is wicked.
I'm finding the phone app drains the battery like crazy. Is this to be expected?
Click to expand...
Click to collapse
Yeah in my experience it drains the battery more then doing other things for some reason. As you can see in my 9 hrs picture I only used the phone for like 2 minutes lol.

[Discussion] Improving efficiency and battery life of the V20.

I've been using a V20 for several months now and I'm really enjoying the many features and flagship-grade hardware it offers. However, it has a lot of problems in terms of design. The V20 runs REALLY hot, and all that heat comes with an enormous power consumption (most figures for stock SOT, including my own, are around four hours.)
I've had a few ideas of my own for correcting LG's mistakes, and I'm wondering what all of your experiences are.
Underclocking the processor: The 820 is a fast, yet power-hungry and hot, processor. Underclocking it would trade off performance in favor of cooler phone and more battery life. Has anyone tried modifying the stock CPU governor or in any way messing with the clocks? I've experimented with LKT but didn't really notice any significant improvement.
Undervolting the processor: I'm not sure about how feasible this is on Android devices. Undervolting the processor would increase battery life and cool the phone at the expense of stability. Anyone find that the CPU is running at an necessarily high voltage?
Reducing Screen Resolution/Framerate: The V20 uses a 1440p display. With its screen size, most of the time this isn't necessary. Are there any tools to automatically reduce resolution when not playing back fullscreen 1440p content? Has anyone tried one, and what are the effects?
Aftermarket batteries: I've been using a 10500mAh extended battery. While it brings SOT up to usable levels, it's very heavy (and has over the course of a month or two decayed to only around 7Ah.) What's the general opinion on these?
Thermal pasting: Repasting or using at thermal pad has been a very common procedure for this device. For those who have done this, what kind of objective analysis of its effects can you providef?

waterlubber said:
I've been using a V20 for several months now and I'm really enjoying the many features and flagship-grade hardware it offers. However, it has a lot of problems in terms of design. The V20 runs REALLY hot, and all that heat comes with an enormous power consumption (most figures for stock SOT, including my own, are around four hours.)
I've had a few ideas of my own for correcting LG's mistakes, and I'm wondering what all of your experiences are.
Underclocking the processor: The 820 is a fast, yet power-hungry and hot, processor. Underclocking it would trade off performance in favor of cooler phone and more battery life. Has anyone tried modifying the stock CPU governor or in any way messing with the clocks? I've experimented with LKT but didn't really notice any significant improvement.
Undervolting the processor: I'm not sure about how feasible this is on Android devices. Undervolting the processor would increase battery life and cool the phone at the expense of stability. Anyone find that the CPU is running at an necessarily high voltage?
Reducing Screen Resolution/Framerate: The V20 uses a 1440p display. With its screen size, most of the time this isn't necessary. Are there any tools to automatically reduce resolution when not playing back fullscreen 1440p content? Has anyone tried one, and what are the effects?
Aftermarket batteries: I've been using a 10500mAh extended battery. While it brings SOT up to usable levels, it's very heavy (and has over the course of a month or two decayed to only around 7Ah.) What's the general opinion on these?
Thermal pasting: Repasting or using at thermal pad has been a very common procedure for this device. For those who have done this, what kind of objective analysis of its effects can you providef?
Click to expand...
Click to collapse
You did not mention what variant, most of the issues you mentioned can be rectified by flashing a custom rom and kernel
Sent from my LG-H910 using XDA Labs

There is also the almighty...AKT (Advanced Kernel Tweaks Mod you can flash. Use the 820 selection.
Also thermal mods as well

Mysticblaze347 said:
There is also the almighty...AKT (Advanced Kernel Tweaks Mod you can flash. Use the 820 selection.
Also thermal mods as well
Click to expand...
Click to collapse
Although LKT and AKT do have some advantages, they didn't give me much more Screen On Time - so I removed them. Have you gotten a significant more amount of SOT? If so, what settings?

baldybill said:
Although LKT and AKT do have some advantages, they didn't give me much more Screen On Time - so I removed them. Have you gotten a significant more amount of SOT? If so, what settings?
Click to expand...
Click to collapse
I can get around 10hrs sot (depending) using Xana extreme battery. That's the one I'm currently on.
Have a 4200 mAh battery (reg size)
---------- Post added at 06:13 PM ---------- Previous post was at 06:12 PM ----------
It is hard to tell. Alot of placebo mods out there. I also put zram at zero and knocked my entropy to 2048 for write. I'm still learning and tweaking tho.

Going along with this, which is better: AKT or NFS-Injector?

I would propose that most custom ROMs are probably placebo when it comes to battery life. Very few mention changing anything related to CPU governor, resolution, etc. all of which are the main factors in power consumption (running in Doze 5% more of the time isn't going to affect SOT, for example, which is the only metric that really matters.)
It doesn't help that LG's display technology leaves much to be desired.

Guys, order a Perfine 4100mah battery in Ali....ess and be happy. Better than that 10000mah ugly fat battery cases. SoT about 7 hours. And if that's not enough for one whole day you are facing other problems lol..

Okay, most admit. Only wifi the whole day cause it's been a rainy day.

Jogg3r said:
Guys, order a Perfine 4100mah battery in Ali....ess and be happy. Better than that 10000mah ugly fat battery cases. SoT about 7 hours. And if that's not enough for one whole day you are facing other problems lol..
Click to expand...
Click to collapse
Can you please share link of Battery in Ali Express

hemal_4404 said:
Can you please share link of Battery in Ali Express
Click to expand...
Click to collapse
https://m.de.aliexpress.com/item/32...d=8252amp-7eN9wah34-yQOJzgwQJScw1558254753245

Advanced Interactive Governor guide for LG V20?
I have seen the "Advanced Interactive Governor" tweaks elsewhere on here for other phones, but it looks like some of it may be able to be used on the LG V20.
(Links to a few of them will be at the bottom for reference.)
I have calculated the frequencies for both CPU's on the T-Mobile variant, the H918, for both maximal efficient load, and minimal efficient load, according to the math in those articles. If anyone would like to try this on an LG V20 with me and help me work out specifics for this phone, it would probably speed up the process quite a bit, and I could share what I have so far.
https://forum.xda-developers.com/android/general/guide-advanced-interactive-governor-t3518881
https://forum.xda-developers.com/mate-10/how-to/guide-advanced-interactive-governor-t3718123
https://forum.xda-developers.com/nexus-5x/general/guide-advanced-interactive-governor-t3269557
https://forum.xda-developers.com/showthread.php?t=2769899

Jogg3r said:
Guys, order a Perfine 4100mah battery in Ali....ess and be happy. Better than that 10000mah ugly fat battery cases. SoT about 7 hours. And if that's not enough for one whole day you are facing other problems lol..
Click to expand...
Click to collapse
In that case: I am facing other problems.
For some reason this is currently getting me only about 2 hours SOT on a used V20 I just bought. Battery capacity seems good according to accubattery.

POCO X3 NFC: Performance limitation when reaching 10% battery Is there a way to remove this limitation? Battery limits performance. Help please tks.

Hi! I'm new and this is my first thread. I have a POCO X3 NFC 128gb/6gb with root, kernel manager in performance mode (CPU AND GPU at maximium frecuency all the time, frequencies NEVER go down ), FDE.IA to the extreme performance, mode disable thermal throttling, Magisk module TherMods v2.0 for disable thermal throttling and custom rom Nusantara 1.1 LTS version android 10 with kernel kerminator. I have a few apps and so much free RAM (3.6gb approximately). But when the device baterry arrives at 10% there is a notable loss of performance (obviously it is a limitation of the system, kernel or battery). I have tried everything to remove this limitation but I have not been able to. Please I need help with this.
postscript: I NEVER USE BATTERY MANAGER OR BATTERY SAVER MODE.
Of something I am sure, the loss of performance is not due to the temperature. It is because of the battery level (specifically 10% to low).
Please I need help with this, if someone knows how disable this limitation of performance, comment pls. I would be very grateful.
Thanks a lot.

DoggyDoggX said:
Hi! I'm new and this is my first thread. I have a POCO X3 NFC 128gb/6gb with root, kernel manager in performance mode (CPU AND GPU at maximium frecuency all the time, frequencies NEVER go down ), FDE.IA to the extreme performance, mode disable thermal throttling, Magisk module TherMods v2.0 for disable thermal throttling and custom rom Nusantara 1.1 LTS version android 10 with kernel kerminator. I have a few apps and so much free RAM (3.6gb approximately). But when the device baterry arrives at 10% there is a notable loss of performance (obviously it is a limitation of the system, kernel or battery). I have tried everything to remove this limitation but I have not been able to. Please I need help with this.
postscript: I NEVER USE BATTERY MANAGER OR BATTERY SAVER MODE.
Of something I am sure, the loss of performance is not due to the temperature. It is because of the battery level (specifically 10% to low).
Please I need help with this, if someone knows how disable this limitation of performance, comment pls. I would be very grateful.
Thanks a lot.
Click to expand...
Click to collapse
Looks like a limitation of your ROM, probably Battery Saver starts at 10%. Check settings - battery.
Also, you should never let it run under 20%, it's killing your battery life.

Welcome to XDA.
At 10% little usable energy remains. It's sort of splitting hairs.
Deep discharging Li's needlessly stresses them.
My cutoff is 40%, 20% max except for calibration which rarely is done. Li's prefer and benefit from frequent midrange (40-70%) power cycling. It can hundreds of additional full charge cycles to the battery's life. It's easier too as you can do a partial fast charge in 15-20 minutes. It yields more charge % per minute like that too.
If you don't care about battery replacement, again you'll get little usable time at full power in the last 10%.

Thanks bro

Noter2017 said:
Looks like a limitation of your ROM, probably Battery Saver starts at 10%. Check settings - battery.
Also, you should never let it run under 20%, it's killing your battery life.
Click to expand...
Click to collapse
Bro i have disable everything battery saver, nothing automatically, no none battery saver turn on automatically. And this happening in the stock ROM MIUI, Corvus Os, etc. it's not because of the ROM. Tks bro

DoggyDoggX said:
Bro i have disable everything battery saver, nothing automatically, no none battery saver turn on automatically. And this happening in the stock ROM MIUI, Corvus Os, etc. it's not because of the ROM. Tks bro
Click to expand...
Click to collapse
The power controller chipset maybe the cause. Maybe that limit is hard burned into it and that parameter can't be altered. It could be it can't supply enough wattage once the voltage drops this low. Don't know but I wouldn't lose sleep over it...