Database Info

[GUIDE] How to get CWM back after flashed the ICS OTA

It seems that many guys don't know what to do after flashing official ICS OTA and finding no CWM.
The OTA contains its stock recovery,and ever more,there is a script (/etc/install-recovery.sh) checking and rewriting the recovery on every normal boot.
So to get CWM back and revert to gingerbread, we can use fastboot.
Requirement:
Working SDK with fastboot, adb is optional.
1) Poweroff your phone
2) Boot into bootloader(fastboot) by pressing vol down and power
3) Plug the cable in and open your terminal.
4) Download CWM img from the following URL.
http://download.clockworkmod.com/recoveries/recovery-clockwork-5.0.2.0-crespo.img
5) In your terminal type the following command.
fastboot flash recovery <Path of the recovery you downloaded in 4)>
Things should goes like this:
D:\android-sdk-windows\tools>fastboot.exe flash recovery recovery-clockwork-5.0.
1.0-crespo.img
sending 'recovery' (4116 KB)...
OKAY [ 0.520s]
writing 'recovery'...
OKAY [ 0.558s]
finished. total time: 1.078s
6) DO NOT REBOOT! Boot into recovery DIRECTLY!!!
7) Now CWM is back,and the evil official OTA can't stop you from reverting to gingerbread now.
8) Optional : If you really like the ICS OTA even it can't be rooted yet, CWM is still very important,right? So you need to delete some evil scipt.
In CWM ,you can use adb to delete the script which checks and rewrites recovery every normal boot.
You can mount /system in CWM ,and use the following command to delete it.
adb shell
rm /system/etc/install-recovery.sh
PS: Sorry for my poor English.

Thanks - just what i was looking for.
Is there a way of getting root back? i have super user on my phone but for some reason it wont root

I've tried it this way.
But in bootloader, fastboot can't find the device.
Any advice?
When my rom is booted it's listed at adb devices

I just flashed the ics stock rom. I tried several guides but it's not ****ing working, how the hell can a total noob get back cwm, so that i can flash back to my old rom?
Would be amazing if anybody can tell me! especially in german, since that would be the easiest way!

Stothex said:
I just flashed the ics stock rom. I tried several guides but it's not ****ing working, how the hell can a total noob get back cwm, so that i can flash back to my old rom?
Would be amazing if anybody can tell me! especially in german, since that would be the easiest way!
Click to expand...
Click to collapse
First download this : http://www.4shared.com/zip/XG506hyV/icsroot-fastboot-recovey.html
Just unpack it , conected your device at the PC and click run.bat.....
After that you need : remove install-recovery.sh just in .....
run in windows-> Start->at the search bar write cmd and navigate into your android sdk is installed
For me :
C:/"Programs and Files (x86)"/Android/android-sdk/tools/>adb shell
# rm /system/etc/install-recovery.sh
#exit
or with Root Explorer into system/etc/install-recovery.sh just renam it (ex. : .sh.old)

Did work for me. Those new driver Files made it.
Didn't need to delete install-recovery.sh ... it's somehow allready gone.

[Q][Kernel][i9023] Help : flashing kernel killed my phone

Hello everybody,
Before telling you about my issue, i should mention that i am a complete newbie regarding flashing kernels. This was my first try, and it didn't work out too well.
I needed to test the USB OTG/Host Functionality for a project at work, and i read that it was possible to enable it on the Nexus S by flashing a custom kernel (kernel_usbhost_build5_icsnexuss from sztupy). It's probably worth mentioning that prior to this i updated the phone to Android 4.0.3.
So i started this morning by rooting it, unlocking the bootloader and installing CWM.
At that point i realized that the recovery mode wasn't accessible : the graphics of the droid with an open belly appears for half a second, and then it gives me the black screen treatment for about a minute before rebooting.
However since there are other ways to flash kernels, i figured i could do without recovery so i didn't look more into it.
I then flashed the kernel using fastboot with this command :
Code:
C:\Program Files\Android\android-sdk\tools>fastboot flash:raw boot H:\data\Downloads\kernel_usbhost_build5_icsnexuss\kernel\zImage
creating boot image...
creating boot image - 3446784 bytes
sending 'boot' (3366 KB)...
OKAY [ 0.422s]
writing 'boot'...
OKAY [ 0.500s]
finished. total time: 0.922s
From the trace i figured that all went well, but when i reboot it stays blocked on the splash screen with the Google logo. Since then i tried flashing several other kernels, without any success. Also tried to flash an update.zip (both ICS and GB) over fastboot but i get this error :
Code:
C:\Program Files\Android\android-sdk\tools>fastboot update H:\data\Downloads\upd
ate.zip
archive does not contain 'android-info.txt'
archive does not contain 'android-product.txt'
error: update package has no android-info.txt or android-product.txt
So to sum it up i now only have access to the bootloader, without recovery mode.
Before you all jump on me, i know what i did is bad habits (i should have tested the kernel before flashing it), i did it in a hurry without checking i had all sufficient knowledge, and to be honest i would probably have been more careful if was doing it on my personal device.
Truth is now i'm really desperate because i turned my company issued phone into a brick and don't have the slightest idea what to do about it...
Is there any guru out there who knows how i could get out of this ?
Thanks a lot !

Download clockworkmod recovery and use fastboot to flash it.
Fastboot flash recovery yourfilename.img
Enter recovery and mounts and storage and mount USB storage
Transfer the kernel you want to your SD card. The one you flashes isn't a kernel I'm almost sure.
Try a different one.
Then transfer a rom to your SD card.
Factory reset/full wipe, then go to mounts and storage and format everything except your sdcard.
DO NOT FORMAT YOUR SD CARD!!!
Once that is done go to install zip from sdcard and flash the rom and then the kernel and reboot. Should be fine then. Keep me posted.

..

Election Day said:
The image you need would be this ClockworkMod img. Save it somewhere, cd to the sdk/platform-tools/ directory and then do:
Code:
fastboot flash recovery /path/to/saved/file/recovery-clockwork-5.0.2.0-crespo.img
Just drag and drop the file in your terminal, after typing the space after "recovery".
Furthermore, what nodstuff said.
Click to expand...
Click to collapse
Ha ha oops! Forgot that part!
I usually just cd to the one where I have recovery saved!

..

Thanks a lot for answering so quickly !
I'll give it a try on Monday, let you know how it goes.

Election Day said:
Yes, you can also do that, of course. In that case you'd have to provide the full path for fastboot. Or maybe you don't have to on Windows? I don't really use that operating system to be honest.
In that case it would be something like:
Code:
C:\Program Files\Android\android-sdk\tools\fastboot flash recovery recovery-clockwork-5.0.2.0-crespo.img
Looking at OP's quotes that is probably the most logical way in this case, you're right.
Click to expand...
Click to collapse
No I just cd to downloads (where recovery file would be) in terminal, type: fastboot flash recovery xxxxxx img
And that's it.
I set the path to fast boot and adb in environmental variables in device manager.
Maybe that's why.

..

Just tried out your tips, worked like a charm !
However I had to wipe everything twice before it would let me update to 4.0.3, I would get this weird error :
file_getprop: failed to stat "/system/build.prop": No such file or directory
Anyway now I'm back on ICS and, following your advice, i found another kernel to flash : Matr1x. No problem with this one, now I can test USB OTG.
Thanks again, you guys rule !

[Q] Flashing stock via fastboot error message

Hi, I want to (re-)flash the stock 4.1.2 rom on my Photon Q, because I recently run into some problems of the phone sending messages to the number 8737 even after I had removed the stock sms app.
This should be the right rsd file:
Code:
asanti_c_sprint-user-4.1.2-9.8.2Q-122_XT897_FFW-5-6-release-keys-cid9.xml.zip (MD5: 88f43a03d313bbcc262db78f15ac957c)
I'm on linux and I don't have any Windows system I could install and run RSDLite on. So I decided to take the fastboot way: I unzipped the above file and tried flashing the rom manually. But I always run in to the following error output:
Code:
# fastboot flash cdrom cdrom
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 22923264 is not a multiple of the block size 4096
fastboot: ../libsparse/sparse.c:143: write_all_blocks: Assertion `pad >= 0' failed.
Note that "fastboot devices" lists the Photon Q as "T069503UAP fastboot". The same or a similar error messages applies to "fastboot flash system system.img" etc. I use fastboot from the Fedora 20 "android-tools" package (version 20130123git98d0789-2).
Any ideas what's the problem here? Solution?
Thanks in advance!

It's dangerous to try and fastboot the items yourself. Would be better to borrow a Windows PC or something to use RSD (virtual machines are also NOT recommended for this).
But perhaps you should just try to fastboot the other partitions. Not sure 'cdrom' is needed. Either way, I strongly, STRONGLY advise against doing what you are doing.

Okay, thanks for your advice!
The same or similar error messages appear when flashing the other partitions (as already mentioned in the first post). Unfortunately, it's really hard to find somebody with a Windows system, at the moment. I thought RSDLite uses fastboot internally anyway.

I'm not sure if the FXZ images can be flashed as they are, via fastboot.
I believe they should be converted to the standard ext4 format via the simg2img.py pytoon script, before being usable.
I repeat I'm not sure, but I believe that hardly motorola's own format is handled correctly by the fastboot command.
Whatever, for your convenience, I attach the mentioned converter script.
Aside fastboot, can be used for a variety of other purposes, the ext4 images can be mounted straight in Linux via loopback device or extracted in windows with a bunch of tools, personally I use Ftk Imager.

Thanks, that tool is great! After conversion, I was indeed able to mount the system partition as follows:
Code:
# mount -o ro,loop system_converted.img /some/mnt/path
But it doesn't help with the other files (cdrom, boot.img, recovery.img), because they seem to have a different format. However, the system partition was all I wanted. Now, instead of reflashing, I'm going to compare the system partition's files (especially in the "app" folder) and see what might have caused my problem.

tuxor1337 said:
But it doesn't help with the other files (cdrom, boot.img, recovery.img),
Click to expand...
Click to collapse
The boot, recovery and similar partitions aren't written on top of a filesystem like /system or /data.
they are written as they are on top of the physical media.
you can safely flash them in any way: fastboot, restore by recovery and so on.
unlike the filesystem based partitions, they are always in the same format.
If you need to edit the boot or recovery content you need a special script to unpack and repack them, many android kitchens have it

I was just wondering whether flashing on Linux will work when using "moto fastboot" like this one: http://forum.xda-developers.com/showthread.php?t=1138092
I don't really need this functionality anymore. But out of curiosity: What do you think?

My photon has a broken USB connector, so I can't test it in first person.
Btw, I believe that testing is the only way to understand what is flashable and what not, obviously taking handy a good full nandroid backup.

[Q] TF300T TWRP bootloop. Return to stock?

Any help would be greatly appreciated. I recently flashed the new TRWP using fastboot. Went fine. I then tried to wipe and flash the newest version of KatKiss. I thought it also went fine but after reboot, it bootloops TWRP. I can tell the tablet to boot Android, but it just hangs. Then when I try to boot back into TWRP, it starts the bootloop all over again. Here is what it's doing during bootloop.
Running OpenRecoveryScript
E:Could not mount /data and unable to find crypto footer.
E:Unable to mount '/data'
E:Unable to recreate /data/media folder.
Updating partition details...
E:Unable to mount '/data'
...done
E:Unable to mount storage.
E:Unable to mount /data/media during GUI startup.
Full SELinux support is present.
E:Unable to mount /data/media/TWRP/.twrps when trying to read settings file.
Processing AOSP recovery commands...
E:Unable to mount '/data'
-- Wiping DATA Partition...
Formatting Cache using make_ext4fs function.
After about 1 minute it will follow with...
E:Unable to mount '/data'
-- Data Partition Wipe Complete!
Done processing script file
It will then reboot within 3 seconds after displaying the last line, and begin it all over again.
I'm hoping someone can tell me what options I have at this point. Would I be able to return to stock using fastboot and ASUS's blob from their website? Again, any help is greatly appreciated!

Solved.
I had already figured on buying a new tablet regardless, so I figured I'd go ahead and try to recover using fastboot. It did work. I noticed this post had a few views, and on the chance there were other people having the same issue, I'll post how I did it. I recommend using Windows 7 for this.
Download the appropriate firmware from ASUS's website. (WW, US, CN, JP etc...) Unzip the file twice until you have the META-INF folder and blob file. I placed both of these into a folder named "TF300t" directly on the C drive.
Install your device drivers, I used the Google SDK drivers.
Boot into fastboot.
Run these commands...
fastboot erase system
fastboot erase recovery
fastboot erase userdata
fastboot erase boot
fastboot erase misc
fastboot erase cache
fastboot -i 0x0B05 flash system c:\TF300t\blob (Again, this is where I saved my blob file.)
You should see something along these lines, when flashing your system...
C:\>fastboot -i 0x0B05 flash system c:\TF300t\blob
erasing 'system'...
OKAY [ 1.665s]
sending 'system' (800931 KB)...
OKAY [142.128s]
writing 'system'...
OKAY [155.462s]
finished. total time: 299.255s
When it's finished, run the last command...
fastboot -i 0x0B05 reboot
From this point, you should be booted back into stock.

Recreate the partition
anim0sity said:
I had already figured on buying a new tablet regardless, so I figured I'd go ahead and try to recover using fastboot. It did work. I noticed this post had a few views, and on the chance there were other people having the same issue, I'll post how I did it. I recommend using Windows 7 for this.
Download the appropriate firmware from ASUS's website. (WW, US, CN, JP etc...) Unzip the file twice until you have the META-INF folder and blob file. I placed both of these into a folder named "TF300t" directly on the C drive.
Install your device drivers, I used the Google SDK drivers.
Boot into fastboot.
Run these commands...
fastboot erase system
fastboot erase recovery
fastboot erase userdata
fastboot erase boot
fastboot erase misc
fastboot erase cache
fastboot -i 0x0B05 flash system c:\TF300t\blob (Again, this is where I saved my blob file.)
You should see something along these lines, when flashing your system...
C:\>fastboot -i 0x0B05 flash system c:\TF300t\blob
erasing 'system'...
OKAY [ 1.665s]
sending 'system' (800931 KB)...
OKAY [142.128s]
writing 'system'...
OKAY [155.462s]
finished. total time: 299.255s
When it's finished, run the last command...
fastboot -i 0x0B05 reboot
From this point, you should be booted back into stock.
Click to expand...
Click to collapse
anim0sity
What happened if you dont have the blob???
I had a tab, i complete erase all the partition and i cannot install any app, always had error 963
How i can recreate all the partition of my tablet?
It running android 5 lollipop
Regards,

Shouldn't be any reason you don't have the blob file. You can download it straight from ASUS's website. When you download it, it comes in a zip file. You have to extract it twice. So unzip the original zip file downloaded, then unzip the file you get from unzipping the original. From there, you should have the blob file needed to flash your tablet back to stock using fast boot / sdk tools.
Sent from my SAMSUNG-SGH-I317 using XDA Free mobile app

anim0sity said:
Shouldn't be any reason you don't have the blob file. You can download it straight from ASUS's website. When you download it, it comes in a zip file. You have to extract it twice. So unzip the original zip file downloaded, then unzip the file you get from unzipping the original. From there, you should have the blob file needed to flash your tablet back to stock using fast boot / sdk tools.
Sent from my SAMSUNG-SGH-I317 using XDA Free mobile app
Click to expand...
Click to collapse
Hi Anim0sity
I downloaded the package and starting doit the process
H:\android-sdk\platform-tools>fastboot devices
015d15b4fc481208 fastboot
H:\android-sdk\platform-tools>fastboot erase system
_
Now is hanging here what i can do it??
Thanks

successful
Hi
After many tries and plug the usb cable in the back of my tower i successful install the firmware
Regards,

HI to rstore to stock using twrp, is it as simple as downloading the file to the tablet, unziping once then flashing the resulting file, or is it a bit more difficult than that?

Returning to stock, where can I find the stock image?

I need to warranty a phone but I need to turn it back to stock. I am using an older version of TWRP, I am guessing here but do I just download the factory image and flash it and I am done? It seems like everything I get when searching is geared towards the Pixel XL and using ADB rather than TWRP.
Thanks in advance.

Beacuse I part time as an internet troll, I have to chastise you for not reading threw this forum, because well that's why it's there, but hey we all can't use our Brian's all the time, but yes download the factory image for your phone Marlin for Pixel XL and Sailfish for Pixel unzip the file, make sure you have lastest usb drivers installed and click the flash all.bat.

Fastboot and flash factory image.
A wonderful guide: https://forum.xda-developers.com/pixel-xl/how-to/guide-how-to-unlock-root-flash-pixel-xl-t3507886

jerryhou85 said:
Fastboot and flash factory image.
A wonderful guide: https://forum.xda-developers.com/pixel-xl/how-to/guide-how-to-unlock-root-flash-pixel-xl-t3507886
Click to expand...
Click to collapse
why do I have to fastboot or ADB cant I just boot into twrp and flash factory image?

twilk73 said:
why do I have to fastboot or ADB cant I just boot into twrp and flash factory image?
Click to expand...
Click to collapse
I'm not a good developer so I cannot answer you that question, but on Google official page, it is recommended to use fastboot or adb to flash factory images...

twilk73 said:
why do I have to fastboot or ADB cant I just boot into twrp and flash factory image?
Click to expand...
Click to collapse
Because recovery and boot are sort of intermingled now. You would be writing over twrp at the same time you are trying to use it to flash.
Use the flashall bat file. If you want to save data edit out the -w from the bat file.

twilk73 said:
why do I have to fastboot or ADB cant I just boot into twrp and flash factory image?
Click to expand...
Click to collapse
I am on linux let me just get that out of the way.
So I used adb to fastboot the factory image but nothing happens
the file is in downloads and in the fastboot file. So I type cd Downloads, cd fastboot, fastboot sailfish-nmf260 it all looks good and you can tell adm is working but nothing happens on the phone.
I am current only able to get the phone into fastboot mode I dont know what I messed up but I can no longer even boot into TWRP.

I must have succesfully removed the twrp recovery because no i get the no command screen. If I hold power and press up I can get into the stock android recovery. Is there a way to install the factory image still? Or is the process still the same and I need to adb fastboot? I might need to just do the abd fastboot on a windows computer at work tomorrow.

twilk73 said:
I must have succesfully removed the twrp recovery because no i get the no command screen. If I hold power and press up I can get into the stock android recovery. Is there a way to install the factory image still? Or is the process still the same and I need to adb fastboot? I might need to just do the abd fastboot on a windows computer at work tomorrow.
Click to expand...
Click to collapse
Download the factory image you want here. Unzip the entire contents to the same folder fastboot is located in. Then boot the phone to the bootloader, then plug it in to you computer. Then, if you're using Linux, double click the flash-all.sh file that got unzipped to your fastboot folder. If you're using a Windows computer, double click on the flash-all. bat file instead of the flash-all.sh file. Then sit back and wait. That's about all there is to it. One note. If you want to save your data, open the script you're going to use in a text editor and remove the -w toward the end of the script (remember to save your changes). If you want the phone wiped clean and like new again, just leave it as is.

robocuff said:
Download the factory image you want here. Unzip the entire contents to the same folder fastboot is located in. Then boot the phone to the bootloader, then plug it in to you computer. Then, if you're using Linux, double click the flash-all.sh file that got unzipped to your fastboot folder. If you're using a Windows computer, double click on the flash-all. bat file instead of the flash-all.sh file. Then sit back and wait. That's about all there is to it. One note. If you want to save your data, open the script you're going to use in a text editor and remove the -w toward the end of the script (remember to save your changes). If you want the phone wiped clean and like new again, just leave it as is.
Click to expand...
Click to collapse
ive done these steps but its failing to work. This is exactly what I am doing.
1. Download factory image.
2. Extract factory image into fastboot file.
the fast boot file is in the dowloads folder so I type.
cd Downloads
cd fastboot
fastboot flash-all.sh
iv also tried fastboot the sailfish-nmf260.img and boot.img and flashall. Ive tried several different ways this is what happens no mater what I type.
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot, system, vendor and if found,
recovery
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
format[:[<fs type>][:[<size>]] <partition> format a flash partition.
Can override the fs type and/or
size the bootloader reports.
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> [ <second> ] ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> [ <second> ] ] create bootimage and
flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache (and format
if supported by partition type)
-u do not first erase partition before
formatting
-s <specific device> specify device serial number
or path to device port
-l with "devices", lists device paths
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address.
default: 0x10000000
-n <page size> specify the nand page size.
default: 2048
-S <size>[K|M|G] automatically sparse files greater
than size. 0 to disable
Click to expand...
Click to collapse
On the phone nothing happens. It appears that all I am getting is a list of options but none of the options seem to be working either.
I might add that the fastboot folder I am using was downloaded back when I installed twrp is it possible my fastboot file doesnt have the correct files to get the job done?

twilk73 said:
ive done these steps but its failing to work. This is exactly what I am doing.
1. Download factory image.
2. Extract factory image into fastboot file.
the fast boot file is in the dowloads folder so I type.
cd Downloads
cd fastboot
fastboot flash-all.sh
iv also tried fastboot the sailfish-nmf260.img and boot.img and flashall. Ive tried several different ways this is what happens no mater what I type.
On the phone nothing happens. It appears that all I am getting is a list of options but none of the options seem to be working either.
I might add that the fastboot folder I am using was downloaded back when I installed twrp is it possible my fastboot file doesnt have the correct files to get the job done?
Click to expand...
Click to collapse
Have you tried putting phone in fastboot mode and doubble click the flash all.sh file? That's how it is done on Windows.
Sent from my Google Pixel using XDA Labs

Sgace said:
Have you tried putting phone in fastboot mode and doubble click the flash all.sh file? That's how it is done on Windows.
Sent from my Google Pixel using XDA Labs
Click to expand...
Click to collapse
Basically yes. But with linux you cant just double click. So in terminal I typed "cd Download, cd fastboot, fastboot flash-all.sh" that command will attempt to launch that file.
I feel like the issue is with adb on my laptop I tried making sure its updated but i got nothing so ill try to do it on a work computer when I get free time.
Its pretty crappy right now because I am without a phone but heck I pet the dog today during lunch instead of reading the news feed off my phone so I guess the dog is happy lol.

twilk73 said:
Basically yes. But with linux you cant just double click. So in terminal I typed "cd Download, cd fastboot, fastboot flash-all.sh" that command will attempt to launch that file.
I feel like the issue is with adb on my laptop I tried making sure its updated but i got nothing so ill try to do it on a work computer when I get free time.
Its pretty crappy right now because I am without a phone but heck I pet the dog today during lunch instead of reading the news feed off my phone so I guess the dog is happy lol.
Click to expand...
Click to collapse
I don't think you can flash it with fastboot. In Windows, at the command prompt, you just type flash-all.bat and the batch file will run. It contains all the necessary fastboot commands. Perhaps that's where you're going wrong. Try just typing flash-all.sh. Leave the fastboot out.

twilk73 said:
Basically yes. But with linux you cant just double click. So in terminal I typed "cd Download, cd fastboot, fastboot flash-all.sh" that command will attempt to launch that file.
I feel like the issue is with adb on my laptop I tried making sure its updated but i got nothing so ill try to do it on a work computer when I get free time.
Its pretty crappy right now because I am without a phone but heck I pet the dog today during lunch instead of reading the news feed off my phone so I guess the dog is happy lol.
Click to expand...
Click to collapse
Try this for sailfish (fix accordingly if marlin, username of course is common sense, if still confused, you shouldn't be using linux)
I build and use debian sid
Code:
cd /home/username/Downloads
tar xvf sailfish-opr3.170623.008-factory-bb8bb3a3.zip -C /home/username
cd /home/username/sailfish-opr3.170623.008
tar xvf image-sailfish-opr3.170623.008.zip
cd /home/username/sailfish-opr3.170623.008
./flash-all.sh
If you need the latest adb/fastboot name it something like google.sh
Code:
#!/bin/bash
wget https://dl.google.com/android/repository/platform-tools-latest-linux.zip
unzip \platform-tools-latest-linux.zip
cp platform-tools/adb /usr/bin/adb
cp platform-tools/fastboot /usr/bin/fastboot

piperx said:
Try this for sailfish (fix accordingly if marlin, username of course is common sense, if still confused, you shouldn't be using linux)
I build and use debian sid
Code:
cd /home/username/Downloads
tar xvf sailfish-opr3.170623.008-factory-bb8bb3a3.zip -C /home/username
cd /home/username/sailfish-opr3.170623.008
tar xvf image-sailfish-opr3.170623.008.zip
cd /home/username/sailfish-opr3.170623.008
./flash-all.sh
If you need the latest adb/fastboot name it something like google.sh
Code:
#!/bin/bash
wget https://dl.google.com/android/repository/platform-tools-latest-linux.zip
unzip \platform-tools-latest-linux.zip
cp platform-tools/adb /usr/bin/adb
cp platform-tools/fastboot /usr/bin/fastboot
Click to expand...
Click to collapse
Sorry I wish I could try this. I had access to a windows computer at work and I was able to get everything done. After doing it at work I have a feeling I wasnt placing the files in the correct folder together to get it to start the update. It can be hard doing this on something other than windows for a dummy like me because most of the tutorials for things like this seem to be windows oriented. Regardless its done. I couldnt lock the boot loader on the windows computer though oddly but no big deal because I can do it on my laptop.
Thanks for all the help guys.