Related
I have an earlier thread here http://forum.xda-developers.com/showthread.php?t=2107600 but that is now buried on page 2 and might be missed by new readers. After a disastrous time trying to root my Galaxy Tab 5100 I did manage with the help of people here to flash the recommended stock ROM - however while the tablet goes through its boot sequenece with the aminated Samsung sign - it sticks when it gets to the plain Samsung logo and wont go further.
Odin reported that it installed OK and the tab rebooted as it should but only this far - not sure what I should try next to get my stock Samsung image back and working. One thing I didn't do was to tick repartition because the instructions only said to do this when a certain type of file was included in the package, and it wasn't. Should I have ticked this after all, if so I can try the same thing again if I can force it back into download mode again. (though as the yellow pane still shows in odin when connected I wonder if I can just go ahead anyway)
I have also been looking for rooting software and came across this
http://root-android.org/?version=Tablet&country=Samsung&ios=Galaxy+Tab+2&submit.x=63&submit.y=104
I am wondering if next time (assuming I ever get it working!) I would be better shelling out $30 and getting software to do it all for me - is this any good? has anyone used it or had reports about it? I wish I had seen this before I read "that it was almost impossible to brick the tab 2"
Also I would like to have root access on my S3 as well but wouldn't dream of risking this I don't think now
gbswales said:
I have an earlier thread here http://forum.xda-developers.com/showthread.php?t=2107600 but that is now buried on page 2 and might be missed by new readers. After a disastrous time trying to root my Galaxy Tab 5100 I did manage with the help of people here to flash the recommended stock ROM - however while the tablet goes through its boot sequenece with the aminated Samsung sign - it sticks when it gets to the plain Samsung logo and wont go further.
Odin reported that it installed OK and the tab rebooted as it should but only this far - not sure what I should try next to get my stock Samsung image back and working. One thing I didn't do was to tick repartition because the instructions only said to do this when a certain type of file was included in the package, and it wasn't. Should I have ticked this after all, if so I can try the same thing again if I can force it back into download mode again. (though as the yellow pane still shows in odin when connected I wonder if I can just go ahead anyway)
Click to expand...
Click to collapse
Have you tried a factory reset from recovery? If you've restored the stock ROM, then all you need to do is the factory reset to get things working again. Don't repartition unless you really need to.
gbswales said:
I have also been looking for rooting software and came across this
http://root-android.org/?version=Tablet&country=Samsung&ios=Galaxy+Tab+2&submit.x=63&submit.y=104
I am wondering if next time (assuming I ever get it working!) I would be better shelling out $30 and getting software to do it all for me - is this any good? has anyone used it or had reports about it? Also I would like to have root access on my S3 as well but wouldn't dream of risking this I don't think now
Click to expand...
Click to collapse
I can't see any reason you should spend that kind of money given how easy the CF-AutoRoot is. In fact, that product looks very shady to me. "Root Any Android Device"? Well, there's lots of devices out there that nobody's been able to root, or devices that take a lot of work. I can't believe there's a single app that'll work across every Android device with a single click.
Be careful, which stock ROM have you flashed? I would use this sequence
flash the stock ROM
then immediately
flash CWM recovery, use CWM recovery to wipe the data (wipe data/factory reset).
Then reboot
CWM ?
DigitalMD said:
Be careful, which stock ROM have you flashed? I would use this sequence
flash the stock ROM
then immediately
flash CWM recovery, use CWM recovery to wipe the data (wipe data/factory reset).
Then reboot
Click to expand...
Click to collapse
Well I followed one of the posted routes on this forum, downloading from a list of recommended files for each version, and it mentioned nothing about CWM which I know nothing about. I have to say that everyone's definition of "easy" on here - I find complicated and difficult - I know my way around windows but android seems much more complex. The only reason I wanted to have root in the first place was to be able to make a complete image back up that would make it easy to restore my device without having to re-download all my software and set up. I do it with windows all the time. To me "easy" is, download and install something - click go - done! Even getting the device to go into download mode in the first place is a very hit and miss affair (as others say on here too) clearly Samsung don't want you to do this.
The other problem is that while the tablet is in this state it wont turn off, just reboots itself when you do and the screen stays on - so unless you leave it plugged in 24/7 - I start each time with a flat battery that I have to recharge before I can try something else
This is the route I followed
DigitalMD said:
Be careful, which stock ROM have you flashed? I would use this sequence
flash the stock ROM
then immediately
flash CWM recovery, use CWM recovery to wipe the data (wipe data/factory reset).
Then reboot
Click to expand...
Click to collapse
I got this through earlier posts - the only thing I didn't do was to go into recovery and reset in step 2 because this simply wasn't possible - the device was stuck on the error message and no amount of button pressing did anything other than restart to the same screen. By this stage I couldn't even go back to check what version of android I was running - it would have been the latest jelly bean distributed to UK.
I also didn't check re-partition as in 6. because there was no pit file in the download
E. Restore to stock
THIS WILL WIPE YOUR DATA!
4.0.3 for p5100: https://hotfile.com/dl/155804946/76b...XALD9.rar.html
4.0.3 for p5110: http://www.hotfile.com/dl/159635395/...3_PEO.zip.html
4.0.4 for p5100: http://www.hotfile.com/dl/165065733/...1_SER.zip.html
4.0.4 for p5113: http://www.hotfile.com/dl/164415704/...5_XAR.zip.html
4.0.? for p5113: http://69.46.67.99/GT-P3113_XAR_1_20...ldcgx9tzmx.zip
4.0.4 for p3100: http://samsung-updates.com/fw/Samsun...3kdo3qe503.zip (PIT files: 16Gb p3100, 8GB p3100
Note: for more language options for stock ROM's for the tab 10, go here.
1. Unzip the downloaded ROM. If there is a file ending in .pit, skip to step 3
2. Reboot into recovery and select wipe data/factory reset.
3. Reboot into Download Mode.
4. Unzip/unrar the stock firmware
5. click PDA and find the stock file (PDA/PLATFORM file, the largest one).
6. Click PIT and open the .pit file you downloaded if one was included with your ROM. Check Re-Partition in ODIN
7. OPTIONAL: if you want to flash the bootloader and/or csc, you can select them as well. If you don't know what that means, you don't need to do it.
8. Click Start.
9. Enjoy!
Help please - this is where I am at the moment - some SIMPLE help needed please
I tried to install what I thought was the stock ROM - it appeared to install but wouldnt boot past the samsung screen. I now realise (a) that I may not have followed the full correct procedure and (b) may have downloaded the 5110 rom instead of the 5100 rom - silly mistake I know.
However reading all the guides I can find there doesnt seem to be a simple way I can find of restoring the standard un-rooted rom so that I can go back and try again. All of the things I can find seem to included downloading something onto the external card but cant do that as I cannot access it and don't have an external card reader.
What I can do now is
boot into download mode
connect to ODIN and see the yellow block
It will not boot normally past the samsung splash screen
and cannot connect to KIES in any mode (I do have the drivers installed and have connected before)
I also have no idea now what is installed on it because I cant get to the system to see!
Is there an easy way to install a stock samsung rom from this point? I don't mind if data is lost, I have nothing important on there and wouldnt mind re-installing apps as I had accumulated far too many anway - really I just want to get my tablet back the way it was from the factory but with the 4.2 jelly bean installed (though if it went back to an earlier version and I could update in Kies that would be ok too)
Can anyone give me simple instructions for doing this using just ODIN and my computer without involving the external card - please.
After that I will be looking for an equally easy way to root it again
I will credit you with a good answer if you can help -as well as appreciating it.
gbswales said:
I tried to install what I thought was the stock ROM - it appeared to install but wouldnt boot past the samsung screen. I now realise (a) that I may not have followed the full correct procedure and (b) may have downloaded the 5110 rom instead of the 5100 rom - silly mistake I know.
However reading all the guides I can find there doesnt seem to be a simple way I can find of restoring the standard un-rooted rom so that I can go back and try again. All of the things I can find seem to included downloading something onto the external card but cant do that as I cannot access it and don't have an external card reader.
What I can do now is
boot into download mode
connect to ODIN and see the yellow block
It will not boot normally past the samsung splash screen
and cannot connect to KIES in any mode (I do have the drivers installed and have connected before)
I also have no idea now what is installed on it because I cant get to the system to see!
Is there an easy way to install a stock samsung rom from this point? I don't mind if data is lost, I have nothing important on there and wouldnt mind re-installing apps as I had accumulated far too many anway - really I just want to get my tablet back the way it was from the factory but with the 4.2 jelly bean installed (though if it went back to an earlier version and I could update in Kies that would be ok too)
Can anyone give me simple instructions for doing this using just ODIN and my computer without involving the external card - please.
After that I will be looking for an equally easy way to root it again
I will credit you with a good answer if you can help -as well as appreciating it.
Click to expand...
Click to collapse
What you need to do is to download the stock ROM for your 5100.
Go to www.samfirmware.com and put "GT-5100" into the search box. You'll see a list of the stock firmware for your device. Pick the appropriate firmware for your country and click "download".
Start up ODIN. Click on the "PDA" button and open the firmware file you downloaded above.
Restart in downloader mode (power and volume up), and connect the tablet to your PC. ODIN should now show the device.
Make sure repartition is not checked, and click on "Start". When it finishes, you now have stock firmware installed.
Power off, then restart in recovery mode. (Hold power and volume down.)
Choose "wipe data/factory reset" by using the volume keys to move the highlight, then pressing the power button to select an entry.
Once it's finished booting, you should be back to normal.
Thanks K1MU for this information which at least looks clear - the only problem I have is when I put in the model etc when I get to country it offers me only 3 choices
UK (BTU) GB (O2) or GB (vodafaone)
My phone was purchased from Amazon and is unlocked so I am worried if these might lock me to a carrier which I wouldn't want
I wonder if BTU is the unlocked one as it doesn't sound like any provider I know - but I am not sure
will post on their forum as well
I think I am getting more and more muddled by the minute (sign of old age I fear) I realise now that I have a p5110 - wifi only and not p5100 3g and wifi.
This means in all probablilty I downloaded the correct rom in the first place. As I had not done the factory reset afterwards so tried that - it appeared to work ok but when I restarted it just played the samsung tune and moving image - then went to "Samsung" and stuck there as it was before.
I am downloading the p5110 wifi only rom from Sam's site - awful download programme they use which doesn't accept paypal even to sign up for faster downloading - I will then try following exactly what you have suggested and keep my fingers crossed
thank you
k1mu said:
What you need to do is to download the stock ROM for your 5100.
Go to www.samfirmware.com and put "GT-5100" into the search box. You'll see a list of the stock firmware for your device. Pick the appropriate firmware for your country and click "download".
Start up ODIN. Click on the "PDA" button and open the firmware file you downloaded above.
Restart in downloader mode (power and volume up), and connect the tablet to your PC. ODIN should now show the device.
Make sure repartition is not checked, and click on "Start". When it finishes, you now have stock firmware installed.
Power off, then restart in recovery mode. (Hold power and volume down.)
Choose "wipe data/factory reset" by using the volume keys to move the highlight, then pressing the power button to select an entry.
Once it's finished booting, you should be back to normal.
Click to expand...
Click to collapse
Although I thought it had got nowhere after wipe restore - when I turned it back the next day I arrived at the start up guide - admitedly it was 4.0.3 and in Portugese but after exploring settings and working out what to click i got it back to uk english - it has now connected to kies ok and is currently downloading the latest firmware - thanks partcularly to the last poster and to all others who helped - I will go through and thank you others too,
Point is now - once I have jelly bean can I get root access easily -without installing another custom rom - ahh well tomorrows problem
There are a couple other guides on here but they are mostly just links to videos or ad infested download links and none of them worked for me so this is how I ended up getting it to work. Everything I used is attached
For the more experienced readers it's simple, flash TWRP using Odin, boot into recovery and TWRP will prompt you to root.
For the only slightly experienced:
Boot into Download Mode (Hold Vol Down +Power to turn on the Device)
Unzip the TWRP Recovery Image after downloading it below.
Connect your tablet to your PC, unzip and run Odin, click the PDA button and select the TWRP md5 file you just unzipped.
Begin holding the Volume Up button on your Tablet and hit the start button in Odin (this will ensure you reboot into the new recovery)
Once in TWRP if you select the reboot option under advanced you should be prompted to root your device if it's not already rooted. If that doesn't happen for some reason you can use adb to sideload the SuperSU zip I've attached, or put it on an sd card and find the flash zip from sdcard option in TWRP to flash it.
Thanks Justin! Works great. Someone should sticky this.
Luckily I had a Windows computer I could use for this, but my main machine is a MacBook Pro. I wish someone would do a nice clear walkthrough like this one for using Heimdall on a Mac.
To start I have rooted many phones but am stumped on this tablet. After getting it to start with holding the volume down and power key it stops on the downloading screen. Once I can get it to reboot I held the volume up and power key and got into system recovery. If I am not mistaken I can boot from here also. Right??
Thanks it was very useful!
Will this trigger the Knox 0x1 problem? I just got this tablet and I want to be able to take it in to Sprint for repairs if I need to.
Thanks!!!
Justin Buser said:
There are a couple other guides on here but they are mostly just links to videos or ad infested download links and none of them worked for me so this is how I ended up getting it to work. Everything I used is attached
For the more experienced readers it's simple, flash TWRP using Odin, boot into recovery and TWRP will prompt you to root.
For the only slightly experienced:
Boot into Download Mode (Hold Vol Down +Power to turn on the Device)
Unzip the TWRP Recovery Image after downloading it below.
Connect your tablet to your PC, unzip and run Odin, click the PDA button and select the TWRP md5 file you just unzipped.
Begin holding the Volume Up button on your Tablet and hit the start button in Odin (this will ensure you reboot into the new recovery)
Once in TWRP if you select the reboot option under advanced you should be prompted to root your device if it's not already rooted. If that doesn't happen for some reason you can use adb to sideload the SuperSU zip I've attached, or put it on an sd card and find the flash zip from sdcard option in TWRP to flash it.
Click to expand...
Click to collapse
Thanks for the help! This is my first root I've done myself and it works like a charm. Now my next step is to flash it to any carrier. Does anyone know how to flash the sprint device to a different carrier? If anyone could help me out, that would be greatly appreciated.
Thanks for this. I finally got a couple Galaxy Tab 3's (One 210 and one 217) to upgrade my girls from their Kindle Fires.
Really needed this root to remove all the factory loaded crap.
Thanks.
colt223 said:
Thanks for this. I finally got a couple Galaxy Tab 3's (One 210 and one 217) to upgrade my girls from their Kindle Fires.
Really needed this root to remove all the factory loaded crap.
Thanks.
Click to expand...
Click to collapse
I just recently got this tablet from a deal sprint had. What version was your tablet on before rooting? Right now mine is on 4.2.2, but there is an update out. I dont want to update if it wont work with this root.
slickdealers said:
I just recently got this tablet from a deal sprint had. What version was your tablet on before rooting? Right now mine is on 4.2.2, but there is an update out. I dont want to update if it wont work with this root.
Click to expand...
Click to collapse
I believe it was on 4.2.2 when I rooted. I will have to double-check that when I get home tonight.
What model number do you have? I had to use a different TWRP download for each one of mine, meaning I had to find a different one for the 210.
colt223 said:
I believe it was on 4.2.2 when I rooted. I will have to double-check that when I get home tonight.
What model number do you have? I had to use a different TWRP download for each one of mine, meaning I had to find a different one for the 210.
Click to expand...
Click to collapse
My model number is T217S. I tried to do some extra googling and came up with a post saying that the update after 4.2.2 installed KNOX on their tablet, which made their tablet come up with errors when trying to root. Based on your answer and what I found, I'm assuming I'm alright to give it a try. I do have one other question though. After rooting do you know if it would be possible to unroot incase I have to go back to Sprint with a problem?
slickdealers said:
My model number is T217S. I tried to do some extra googling and came up with a post saying that the update after 4.2.2 installed KNOX on their tablet, which made their tablet come up with errors when trying to root. Based on your answer and what I found, I'm assuming I'm alright to give it a try. I do have one other question though. After rooting do you know if it would be possible to unroot incase I have to go back to Sprint with a problem?
Click to expand...
Click to collapse
I am honestly not sure about going back, but I have had no problems. In fact, when I booted after root, something (sorry I dont remember if it was during root, or after) asked me if I wanted to disable Knox. I said yes, and smooth sailing ever since. I think it might have been the super user app itself that disabled it for me.
colt223 said:
I am honestly not sure about going back, but I have had no problems. In fact, when I booted after root, something (sorry I dont remember if it was during root, or after) asked me if I wanted to disable Knox. I said yes, and smooth sailing ever since. I think it might have been the super user app itself that disabled it for me.
Click to expand...
Click to collapse
Just tried it and successfully rooted! I got the same message that you described about Knox. It appears when you go to update SuperSu. Thank you for the help!
For anyone else wondering about going back to stock, I found a thread to the stock firmware.
http://forum.xda-developers.com/showthread.php?t=2512172
I found the answer in another thread. Flashing TWRP will trip Knox.
Didn't work for me
I did the TWRP stuff and all it did was trigger that warranty bit. Still no root.
colt223 said:
I am honestly not sure about going back, but I have had no problems. In fact, when I booted after root, something (sorry I dont remember if it was during root, or after) asked me if I wanted to disable Knox. I said yes, and smooth sailing ever since. I think it might have been the super user app itself that disabled it for me.
Click to expand...
Click to collapse
Yeah, same story here. After flashing TWRP then installing SuperSU first via the TWRP option by booting directly to recovery before OS after flashing TWRP through odin.....then once I clicked the SuperSU app after the OS loaded I chose first the "play" option to update SuperSU then the TWRP option to install the binary update. When it next booted it informed me that Knox was installed and asked whether to disable or not..I said yes and haven't had any problems at all...just trying to find a good ROM now^^
awesome thanxs for the info..... now if we could only get cm11 on this puppy
Root Failure, odd case
I have twins - they are both, identically:
Software Version: T217VPUAMH9
Hardware Version: T217S.04
Model Number: SM-T217S
Android Version: 4.2.2
Baseband Version: T217SVPUAMH9
Kernel Version: 3.4.0-1458241
Build Number: JDQ39.T217SVPUAMH9
Jim Trotter III-style, I-DENTICAL!
I successfully rooted one with:
1: Enable debugging
2: Boot into Download Mode (from poweroff, hold Vol Down+Power)
3: terminal: sudo heimdall flash --RECOVERY ./T217S.TWRP2.7.0.0.flashable/recovery.img
4: poweroff ; boot to TWRP. From TWRP, wipe [factory reset], then install: ./root/SuperSU-v1.93.zip
With the second (apparently evil) twin, at the heimdall command, I get:
...
Session begun.
Downloading device's PIT file...
PIT file download successful.
Uploading RECOVERY
0%
ERROR: Failed to send file part packet!
ERROR: RECOVERY upload failed!
Ending session...
ERROR: Failed to receive session end confirmation!
Releasing device interface...
Re-attaching kernel driver...
On the device, the blue progress bar grows to about 2% and stops.
I even tried using a different cable in case one had gone wonky, to no avail.
I am at a total loss here.
... and SUCCEED, but via strangeways
...
So, mounting frustration.
I tried instead a slightly different version of TWRP:
$ sudo heimdall flash --RECOVERY recovery/T217S.TWRP.2.7.0.0.recovery/recovery.tar.md5
This time the result is different, but still no success:
Initialising connection...
Detecting device...
Claiming interface...
Attempt failed. Detaching driver...
Claiming interface again...
Setting up interface...
Initialising protocol...
Protocol initialisation successful.
Beginning session...
Some devices may take up to 2 minutes to respond.
Please be patient!
Session begun.
Downloading device's PIT file...
PIT file download successful.
Uploading RECOVERY
100%
... but it stuck at 100% and did not continue. Device also stuck.
^C, hard reboot of device.
Tried again to double check, same result - sticks at 100%, progress bar on device sticks at somewhere around 5%.
Aware of the possible futility, but bored, I tried first one again:
$ sudo heimdall flash --RECOVERY ./T217S.TWRP2.7.0.0.flashable/recovery.img
SUCCEED.
So, apparently it has to be "knocked loose"?
Dunno. I'm in. Hope this helps someone else.
Root NB8
This won't work with NB8 EDIT: I was wrong this does work on NB8
Apparently had to reinstall the drivers a few times to get it to take on Windows. Still no clue what the issue was with Heimdall.
Hello. I've never bothered trying to root a phone before, but getting tired of the forceware apps being a buggy PITA you can't even disable/remove, so thought it was time to root for more control.
However, there are so many old posts, old tut videos, updates to software that might be superseded by newer software by the time you get to the last page, etc. that I'm not actually sure what's what or where to start, so figured I'd ask and hopefully get accurate info from you guys/gals that are more in the loop on the most current methods using the latest software.
Phone in question seems to be a 2015 J700PVPU2BQJ2 software version w/ J700P.03 version hardware updated to 7.1.1 and it's through Virgin. I ONLY want to root the phone, and nothing more, while trying to keep the phone as close to factory image as possible., and prefer using a PC to do it. Thought Auto-Root might be way, but it looks like it's not in use anymore?
Again, I'm new to phone rooting and the lingo, so treat me with kid gloves, thank you.
J727P
Nupid Stoob said:
Hello. I've never bothered trying to root a phone before, but getting tired of the forceware apps being a buggy PITA you can't even disable/remove, so thought it was time to root for more control.
However, there are so many old posts, old tut videos, updates to software that might be superseded by newer software by the time you get to the last page, etc. that I'm not actually sure what's what or where to start, so figured I'd ask and hopefully get accurate info from you guys/gals that are more in the loop on the most current methods using the latest software.
Phone in question seems to be a 2015 J700PVPU2BQJ2 software version w/ J700P.03 version hardware updated to 7.1.1 and it's through Virgin. I ONLY want to root the phone, and nothing more, while trying to keep the phone as close to factory image as possible., and prefer using a PC to do it. Thought Auto-Root might be way, but it looks like it's not in use anymore?
Again, I'm new to phone rooting and the lingo, so treat me with kid gloves, thank you.
Click to expand...
Click to collapse
ok you have an older phone the J700P you can start by downloading odin an twrp recovery an superSU zip you can get twrp from here !https://twrp.me/devices/samsunggalaxyj72015qcomsprint.html
an odin from here
https://mega.nz/#!nYVDXBAC!_cTWbW4_Ow8sZMWcZvO7bVwEEBFlD1DQsB5NeFhj1EY
An just google latest superSU zip to find that !
good luck !
step 1 enable oem in development settings !
step 2 put phone into download mod an flash twrp then boot into twrp recovery an flash superSU zip !
Thank you for the info. I'm presently confused. Here's what I've done:
I ran Odin and flashed with twrp-3.2.1-0-j7ltespr.img.tar. It went through successfully going off odin's message.
Vol. up + home + power. It'll eventually show a yellow triangle with the white trash can guy on it's side stating "No Command". Power + up gets the Android Recovery screen.
At this point, am I supposed to choose the Wipe Data/factory reset option? I see tuts that seem suggest I should already be in the twrp UI or something. I've tried watching vids and looking at a handful of tuts, but either they are the wrong phone, too old, the button combos show something else entirely, etc.
Thanks!
Anyone? Videos show the buttons vol. up + home + power as booting right into twrp recovery gui. For me, it's going into "Android Recovery" screen. Is there an extra step with Odin or something that I missed? Or am I supposed to wipe/boot in the Android Recovery screen and it'll boot the twrp recovery gui? If bricking something I'm not familiar with wasn't a concern, I'd be courageous with it.
I tried the twrp-3.1.1-2-j7ltespr.img.tar and same thing. Odin says it's a success. Phone boots up to normal phone screen. Videos show the person's phone booting right into Twrp recovery. Mine acts like nothing changed. Root checker says unrooted. The Twrp app says unrooted. OEM Unlock and Debugging options in phone are selected, and I have it set for manual updates.
Anyone have an idea what's going on here?
J700P
Nupid Stoob said:
I tried the twrp-3.1.1-2-j7ltespr.img.tar and same thing. Odin says it's a success. Phone boots up to normal phone screen. Videos show the person's phone booting right into Twrp recovery. Mine acts like nothing changed. Root checker says unrooted. The Twrp app says unrooted. OEM Unlock and Debugging options in phone are selected, and I have it set for manual updates.
Anyone have an idea what's going on here?
Click to expand...
Click to collapse
Ok when flashing twrp with Odin first uncheck auto reboot in options flash twrp pull battery replace battery an boot into twrp an flash superSU zip then reboot system !
Thank you so much Peter! That did the trick THANK YOU :good:
For posterity to anyone else w/limited root knowledge with a SM-J700P Virgin variant running 7.1.1 (and what was most recent factory updates until this point); Flashed the twrp-3.2.1-0-j7ltespr.img.tar again w/o auto reboot in options of Odin, pulled battery once safe (i.e. you get the "Pass" message from Odin confirming everything went as planned) to get out of the downloading screen, replaced battery, booted the recovery (vol up + power + home) and it finally booted into the twrp recovery gui. Selected the "Install" option, then went to where the supersu.zip was stored on the SD (I created a separate "supersu" folder via PC connection for easy locating; internal phone memory card looks to now be unlocked, so can most likely use that if you don't have a SD card). Checked the "reboot once installed option" in the gui box and swiped to install supersu,zip and verified it was rooted via app after phone fully booted back up.
BTW, If anyone gets a hang/crash in Odin immediately after trying to select a twrp tar image in the "AP" box, try downloading the twrp image via PC instead of the through the phone (the legit twrp site that has the repository of past/current .tar), and just put it somewhere like Odin folder on desktop. Somehow, mine were getting corrupted via phone download through the twrp app, and Odin would NOT recognize the file was bad/corrupt when trying to select it via the AP box and hangs instead of giving a warning message. I ran into this earlier on then noticed the file was too small for some reason after viewing it on my PC, hence the Odin hang that needed a task manager kill.
I hate to necro an old thread but I still do not want to create an entire new topic for a single question. If I was to follow this info will it wipe the phone or will it simply root it while keeping all data on the phone? I ask as it is my wife's old phone and she would be pissed if I wiped her apps and everything on accident since she wont be able to remember what she had.
Edit: also when I add the TWRP file to odin it immediately hang/crashes like OP mentions but I am already DLing via pc. any thoughts?
Hey guys,
decided to flash the latest DBT Firmware via Odin to get back to stock completely. (G930FXXU3ESA3)
After flashing the firmware through Odin the phone reboots and then installs an update and erases data (blue background).
After a second reboot I end up with a blue screen and the simple error: "No command".
I can not get into recovery, as I end up with the same error message wether booting into recovery or the system.
I CAN however get into downloadmode and flash twrp, after that I can boot into system but I want to keep the whole system vanilla, without TWRP.
Installing TWRP keeps the device encrypted, no matter what. I can wipe, then install no-verity-encrypt and as soon as I reboot the device is encrypted again.
Ive tried: Different Firmware Version (December 2018), 3 different cables, different odin versions.
Edit: attached an Image of the message that Pops up after about 30sec on the no command screen.
Ok, so your device will take UK Unbranded BTU firmware. You can get it from a few sources and even direct from Samsung servers with Samtool.
Forget all that flashing TWRP and non verify nonsense, if you can get into download mode you can flash firmware, obviously make sure the firmware downloaded is not corrupt etc.
I've used Odin V10 -13 to flash BTU and every version flashed it correctly. Sometimes you do get that "installing update" and then "erasing" but that's fine just leave the phone for a few minutes it should eventually reboot normally.
FLASH No verity.zip
VIA TWRP
https://forum.xda-developers.com/attachment.php?attachmentid=4490455&d=1525176288
cooltt said:
Ok, so your device will take UK Unbranded BTU firmware. You can get it from a few sources and even direct from Samsung servers with Samtool.
Forget all that flashing TWRP and non verify nonsense, if you can get into download mode you can flash firmware, obviously make sure the firmware downloaded is not corrupt etc.
I've used Odin V10 -13 to flash BTU and every version flashed it correctly. Sometimes you do get that "installing update" and then "erasing" but that's fine just leave the phone for a few minutes it should eventually reboot normally.
Click to expand...
Click to collapse
Just tried the latest BTU with Odin 3.13.1, same problem. Its reboots into the blue screen, applying system update to about 32% and then switches to "Erasing". After about 1min it reboots, shows "Installing System update" for a second and I end up with "No command" again. And from there on it just constantly reboots into the "No command" screen.
This seems like the same problem. I can not enter stock recovery to wipe though...
Things ive tried so far:
- Different firmware Versions (all oreo since downgrading is impossible)
- Formating with pit files
- Different Odin Versions
- Unplugging and replugging the battery
- Installing TWRP, wiping data and then installing stock recovery through TWRP
Did u try in Odin nand erase and repatition option? If not try it ( make sure u have pit file extracted or downloaded from the net)
Scorpionea said:
Did u try in Odin nand erase and repatition option? If not try it ( make sure u have pit file extracted or downloaded from the net)
Click to expand...
Click to collapse
Did a efs backup through TWRP just in case, then flashed the latest DBT firmware with nand erase -> still the same problem.
I can only guess that this was caused by using a backup from another phone back when Oreo came out, this probably messed something up really badly. Very weird, im kinda lost.
Killuminati91 said:
Just tried the latest BTU with Odin 3.13.1, same problem. Its reboots into the blue screen, applying system update to about 32% and then switches to "Erasing". After about 1min it reboots, shows "Installing System update" for a second and I end up with "No command" again. And from there on it just constantly reboots into the "No command" screen.
This seems like the same problem. I can not enter stock recovery to wipe though...
Things ive tried so far:
- Different firmware Versions (all oreo since downgrading is impossible)
- Formating with pit files
- Different Odin Versions
- Unplugging and replugging the battery
- Installing TWRP, wiping data and then installing stock recovery through TWRP
Click to expand...
Click to collapse
Ok, from the no command screen do the following.
Hold power until phone switches off, then press power+home+volume up. The phone should now boot into original recovery screen. Select "wipe/factory reset" and then reboot device. Job done.
cooltt said:
Ok, from the no command screen do the following.
Hold power until phone switches off, then press power+home+volume up. The phone should now boot into original recovery screen. Select "wipe/factory reset" and then reboot device. Job done.
Click to expand...
Click to collapse
Tried that, recovery is simply not working. If I hold vol - + power + home to restart and switch immediatly to vol + I boot into the usual blue screen with No command. I even tried unplugging the battery to shut off the phone and boot into recovery from there but that is not working either. Sorry should have stated that more clearly.
If I flash TWRP however, I can easily boot into TWRP with the recovery button combo.
Killuminati91 said:
Tried that, recovery is simply not working. If I hold vol - + power + home to restart and switch immediatly to vol + I boot into the usual blue screen with No command. I even tried unplugging the battery to shut off the phone and boot into recovery from there but that is not working either. Sorry should have stated that more clearly.
If I flash TWRP however, I can easily boot into TWRP with the recovery button combo.
Click to expand...
Click to collapse
Ok it's a tricky one so one more thing I would suggest is download and install Samsung smart switch on your PC, place the phone in download mode plug it into lap top and choose emergency software recovery in smart switch
Edit. I just remembered before that try this button combo from the no command screen volume up+volume down+power.
cooltt said:
Ok it's a tricky one so one more thing I would suggest is download and install Samsung smart switch on your PC, place the phone in download mode plug it into lap top and choose emergency software recovery in smart switch
Edit. I just remembered before that try this button combo from the no command screen volume up+volume down+power.
Click to expand...
Click to collapse
Hmmh. Searched a lot for the version that still supported emergency recovery. (which seems to be 4.0). If I go into download mode, start smartswitch and try to use emergency recovery there is nothing for me to select.
Volume up + down and power gives me the terminal like look which I attached in the first post with all those error messages.
Killuminati91 said:
Hmmh. Searched a lot for the version that still supported emergency recovery. (which seems to be 4.0). If I go into download mode, start smartswitch and try to use emergency recovery there is nothing for me to select.
Volume up + down and power gives me the terminal like look which I attached in the first post with all those error messages.
Click to expand...
Click to collapse
The EFS partition is corrupt or blank, it's the only logical explanation but the TWRP back up should solve that, without looking at it my self and running some commands i cant help your further.
cooltt said:
The EFS partition is corrupt or blank, it's the only logical explanation but the TWRP back up should solve that, without looking at it my self and running some commands i cant help your further.
Click to expand...
Click to collapse
TWRP backup was created after I ran into problems though. Ive checked some more things and it seems like the serial number that is displayed (in combination rom and or Z3X) is not the same SN that is printed on the back of the phone. Could this be related? And how would I go about changing it back to the one on the sticker? The IMEI is correct.
Had someone who was more into the whole thing contact me here but when I wanted to "donate" only half of what he was asking he refused to help me.
Killuminati91 said:
TWRP backup was created after I ran into problems though. Ive checked some more things and it seems like the serial number that is displayed (in combination rom and or Z3X) is not the same SN that is printed on the back of the phone. Could this be related? And how would I go about changing it back to the one on the sticker? The IMEI is correct.
Had someone who was more into the whole thing contact me here but when I wanted to "donate" only half of what he was asking he refused to help me.
Click to expand...
Click to collapse
Thats because he's a scammer. Never donate to get your phone fixed! Donate to Rom developers and things you like but never to get the phone fixed, they're usually lying.
The serial number should be the same ON the phone as displayed IN phone. Tell me the story about the phone, how did you get it? what region? where are you? what firmware was installed? Can you still flash a ROM with TWRP? Can you check OEM unlock?
---------- Post added at 04:53 PM ---------- Previous post was at 04:51 PM ----------
nmnmnmnmnmnmnmnmnm
Pretty sure he was just trying to remote repair for a price, which is not allowed on XDA. Would obviously donated on my own if he actually fixed it.
Bought the phone unlocked directly from a provider (simply - germany - dbt - g930f) back in 2016. Tripped kn0x after a few months, installed a few custom roms until Oreo came out.
This is where I messed up I think: I used a TWRP backup from someone else that he had shared here on XDA, which probably included his /efs too.
Since then I had constant connection problems, weak internet connection, dropped calls and so on.
Broke my screen and then decided to repair it myself. Bought a new frame, screen, battery, usb-port, earpiece and vibrator - managed to assemble all of that.
I can install all latest official firmwares (bootloader 3) through Odin. If I leave it at that I have no recovery and end up with the initially shown screen and "No command".
If i install TWRP from there and simply root with magisk or apply dm-verity-fix I can boot into the stock firmware with everything working.
I can also install ROMs. Just going completely vanilla is not possible anymore. OEM Unlock is checked, USB debugging works.
Edit: What is also astounding: If I flash version DBT-G930FXXS3ERHD-20180918145033 (oldest possible Oreo Version) I can enter recovery and do a factory reset and wipe cache.
If I do that however I am stuck at the Galaxy S7 Logo, not even bootlooping.
Killuminati91 said:
This is where I messed up I think: I used a TWRP backup from someone else that he had shared here on XDA, which probably included his /efs too.
Click to expand...
Click to collapse
awww.....come on man you should have said this at the start! Of course you can't use someone else's EFS data, it's unique to your handset. Custom Rom's patch some but not all EFS data that's why they work and in your case that's why Stock firmware isn't going too.
Anyway if this is the problem (and i suspect it is) there is only one way to fix it with Octopus box which can write all the important info back onto the EFS. Your IMEI, Serial, Mac address etc. Odin reads the info from the EFS prior to nand write start, if the phone serials don't match it will always fail at some point.
You can install a custom via twrp but it will not work correctly due to EFS data miss match. Octopus box is your answer.
cooltt said:
awww.....come on man you should have said this at the start! Of course you can't use someone else's EFS data, it's unique to your handset. Custom Rom's patch some but not all EFS data that's why they work and in your case that's why Stock firmware isn't going too.
Anyway if this is the problem (and i suspect it is) there is only one way to fix it with Octopus box which can write all the important info back onto the EFS. Your IMEI, Serial, Mac address etc. Odin reads the info from the EFS prior to nand write start, if the phone serials don't match it will always fail at some point.
You can install a custom via twrp but it will not work correctly due to EFS data miss match. Octopus box is your answer.
Click to expand...
Click to collapse
Dang it. Thank you! Off to find someone who can do this via remote access or in Berlin.
Same situation right now with my S7. Damn.
Hi everyone. Did you guys find any way to resolve this issue? i have exactly the same issue here.. but in my case i cannot use twrp cuz i never installed it before... the issue happened right after i tried to enter the recovery mode by pressing the buttons...
my wife's galaxy s7 touch screen was acting weird and i tried to get into the recovey mode..which is pretty muh easy to do... but once i tried the no command msg came up and now i have exatly the same case as the guy that opened this thread....also done everything hes done....any clue about this anyone?
id appreciate some help..
thanks in advance
Diego Boffa
Anyone?
I have exactly the same error with "fail to open recovery_cause(No such file or directory)#
My Tablet is now stuck with a blue "android dead" screen saying "No command".
My history to disaster:
- i've recovered a "broken" Samsung Tablet (sm-T585) with corrupted file system via
* Download Mode works -> TWRP install -> Mount option -> use ADB to recreate EFS partition -> re-flash stock image (android 8) with odin
- device works fine
- then i've noticed it can only be used with a certain cell provider (o2)
- then i've tried to flash an older version of the stock rom (android 7) due some problems in Android 8 (often some slow downs while operating)
- this doesn't work, the flash don't start
- therefore nothing should be happend, or?
- then i've can't get anymore in the stock recovery to wipe all data
...therefore the mess began:
* i can't flash TWRP anymore
* i can't flash stock recovery anymore
* i only can get into download mode
* i can only flash a certain rom type successfully (green PASS within odin), but with the final stuck with boot loop, with the mentioned blue screen
* other rom version can't flashed
I hopefully ask you guys here, if anyone can help me?
Any help would be very appreciated ...
I was going through this team andriod article about rooting my phone and it said I have to install TWRP for Galaxy S7 and it gave another guide that I went though.
But the end of that second guide says to get out of a TWRP boot loop I need to make TWRP Permanent on Galaxy S7 but to do that I need a rooted phone, so I continued on with the first guide on rooting my phone.
So I went though the rest of the rooting guide and now when rebooting my phone it says "verification failed unable to restart your device samsung s7" and gives me the option to reset. I slide this reset option and on resetting it brings me into a TWRP menu for about 5 seconds then tries to boot the phone again but the same verification error keeps coming up and now the phone is stuck in this loop.
I've been able to get back into the TWPM menu and tried to wipe my phone but it fails with a red ending message of "Unable to mount storage".
I'm in the middle of downloading the stock firmware from SAMMobile, a stock firmware from theandroidsoul.com and someone had posted a stock firmware on a google drive account on this site which I'm going to download after.
What are my options here? Can I still root my S7 and get into my phone? Can I get access to my phone's files or are they now permantantly lost?
Any advice and guidance would be great, thanks.
RootingRooter said:
I was going through this team andriod article about rooting my phone and it said I have to install TWRP for Galaxy S7 and it gave another guide that I went though.
But the end of that second guide says to get out of a TWRP boot loop I need to make TWRP Permanent on Galaxy S7 but to do that I need a rooted phone, so I continued on with the first guide on rooting my phone.
So I went though the rest of the rooting guide and now when rebooting my phone it says "verification failed unable to restart your device samsung s7" and gives me the option to reset. I slide this reset option and on resetting it brings me into a TWRP menu for about 5 seconds then tries to boot the phone again but the same verification error keeps coming up and now the phone is stuck in this loop.
I've been able to get back into the TWPM menu and tried to wipe my phone but it fails with a red ending message of "Unable to mount storage".
I'm in the middle of downloading the stock firmware from SAMMobile, a stock firmware from theandroidsoul.com and someone had posted a stock firmware on a google drive account on this site which I'm going to download after.
What are my options here? Can I still root my S7 and get into my phone? Can I get access to my phone's files or are they now permantantly lost?
Any advice and guidance would be great, thanks.
Click to expand...
Click to collapse
I can assure you that I did not need to use TWRP at all in order to root my Sprint SM-G920P S7 a couple of days ago.
I did have to use ADB on a Windows machine and run a root.bat file from the directory where it was located on PowerShell and go through a questionnaire type little blue DOS rooting program while the phone was on DL mode. Can get you the exact link if you need it however its in a different place where I am located right now so I cant post you the link at the moment. Its an XDA thread.
You have a sprint s7 (non edge) or what carrier you got?
I hope its not a Sprint QualComm chipset like mine as you are unable to change carriers if you want to go to T-Mobile or someplace else with a Qualcomm Chipset Sprint S7
I have a very similar issue as OP. I did install the no-verity-opt-encrypt which I guess is what OP needs but for me that did not help. I still get the verification failed but I am able to boot into TWRP and access the phone via ADB etc.
However I also get the "unable to mount storage" which I guess might be the main issue since it can not clear the cache.
oskarolw said:
I have a very similar issue as OP. I did install the no-verity-opt-encrypt which I guess is what OP needs but for me that did not help. I still get the verification failed but I am able to boot into TWRP and access the phone via ADB etc.
However I also get the "unable to mount storage" which I guess might be the main issue since it can not clear the cache.
Click to expand...
Click to collapse
Update: I had missed the step where you had to format data. After that everything worked.