Build 04/10/2020 #OP3-T
Telegram Group: https://t.me/TugaPowerRomOP3T
#TugaPower Q 10.0.0_r41 12.0 LineageOS #laos #OnePlus
If you have some spare bucks consider donating, it will be really appreciated: https://www.paypal.me/TugaPower
If you are on other base rom, best practice is to factory reset prior to flash rom and new gapps.
After this steps if rom does not boot, probably you are encrypted, remove encryption and repeat the steps.
If after removing encryption rom still does not boot, make a factory reset again after flashing rom and gapps, then all will be fine.
Please be sure you are using one TWRP that can handle firmware flash
Advise to use latest official TWRP
Also be sure you are using proper firmware.
Relative to gapps, the advised ones is pico package since nano its now too big to install ( ARM):
Face unlock ( no gapps required ) ( Settings/Security )
OTA built in on rom for updates easly
Three fingers screenshot ( enable in settings over gestures options )
Support out of the box to microG GmsCore ( http://forum.xda-developers.com/andr...vices-t3217616 )
No more need to make microG system app
PoGO: Gonna catch then all ( Always report using real GPS in case of mock location been used )
What does not works:
Let me know to add to second post
Changelog: TugaPower Q 12.0
Project name: android_packages_apps_Trebuchet
* Launcher3: categorize settings
* Launcher3: improve protected app names style
* Launcher3: Add support for icon packs
* Trebuchet: optimization of searching apps in Chinese
Project name: android_build
* backuptool: do not unmap dynamic partition after finished
* Bump Security String to 2020-09-05
* sign_target_apks: Replace update-payload-key.pub.pem in RECOVERY as well
* build_image: Allow disabling custom inode count calculation
Project name: android_packages_apps_Settings
* Settings: Allow removing livedisplay pref screen with config_enableLiveDisplay
* Remove useless png and add vector drawable
* Remove "storage type" preference from Settings
Project name: android_packages_apps_TvSettings
* Add rooted development option
* Add Lineage advanced reboot options
* Show Trust in security settings
* Add button to shut down device
* Settings: Implement ADB over network
* Settings: Add intent to launch LineageOS platlogo upon multiple taps
* Add build date (ro.build.date from build.prop) to About screen.
* One does not simply become a Developer
* Add LineageOS version to the About screen
Project name: external_motorola_faceunlock
* Update prebuilt apk
Project name: android_external_chromium-webview
* Update Chromium Webview to 85.0.4183.101
Project name: android_packages_apps_LineageParts
* LineageParts: Allow removing livedisplay pref screen with config_enableLiveDisplay
Project name: android_packages_apps_Messaging
* Fix NoSuchMethodError for getTypeInfo()
* Remove advanced category if no preference
* AOSP/Messaging - Changed minSdkVersion to 19.
* Fix SecurityException at getActiveSubscriptionInfoList() on N and O
* Fix app initialization issue if no permissions
* AOSP/Messaging - Changed midSdkVersion to 14 and reverted to using Telephony.Carriers.CONTENT_URI instead of Telephony.Carriers.SIM_APN_URI.
* Fix handling format based on API level accordingly.
* Remove only one Lambda Exp for JAVA 7
* Fix creating ConnectivityUtil to work on any platform
* Fix missing computeIfAbsent() method in L_MR1 and M
* Remove unnecessary methods from MmsUtils
* Allow call to phone numbers or voice mail numbers only
* Check CONFIG_SEND_MULTIPART_SMS_AS_SEPARATE_MESSAGES always
* Fix ConcurrentModificationException
* Parse recipients from RESPOND_VIA_MESSAGE correctly
* Disallow making a call to emergency numbers
* Auto re-sending MMS for all the transient failures
* Remove dead code
* Check whether dialable only
Project name: android_packages_apps_SetupWizard
* ATV: Disable custom SUW if GMS SetupWraith is available
Project name: android_packages_inputmethods_LatinIME
* LatinIME: Move keyboard height setting from debug to advanced
Project name: android_device_lineage_atv
* Enable bluetooth remote pairing in Setupwraith
Project name: android_device_google_atv
* Disable Traceur on userdebug
Project name: android_device_oneplus_bacon
* bacon: Clean up kernel cmdline
Project name: android_lineage-sdk
* sdk: Add overlay for disabling livedisplay
* lineage-sdk: Run bpfix
* lineage-sdk: Fix typo for filterDisplayModes comment
Project name: android_hardware_libhardware
* audio_amplifier: Add new hook for setting amp feedback
Project name: android_hardware_qcom_audio
* audio_amplifier: Add new hook for setting amp feedback
* hal: Support the audio amplifier hook
Project name: android_hardware_qcom_display
* copybit: Export c2d header
Project name: android_hardware_qcom_media
* libc2dcolorconvert: Remove dependency on stagefright
* media: change way of accessing aosp project headers
* mm-video: remove hevc sw decoder files
* mm-video: Remove old decoder test apps
Project name: android_hardware_qcom_display
* Revert "Don't force GPU composite for older devices"
Project name: android_hardware_qcom_display
* msm8084: hwcomposer: Fix unused parameter build warning
Project name: android_system_bt
* Changed HID_DEV_MTU_SIZE from 64 to 512
Project name: android_frameworks_opt_telephony
* Use FLAG_IMMUTABLE for MultiSimSettingController
Project name: android_frameworks_base
* core: Move context-aware Bluetooth airplane mode string for translations
* WiredAccessoryManager: support for multiple display ports
* audio: update WiredAccessoryManager to use ExtconUEventObserver based on events available
* WiredAccessoryManager: Support for multiple extconn devices
* WiredAccessoryManager: update extcon file paths
* WiredAccessoryManager: Add support for DisplayPort Audio
* SystemUI: fix NPE on global actions dialog
Project name: android_vendor_lineage
* backuptool_ab: Use mv instead of cp for restore step
* apns: Enable IPV6 for China Telecom
* apns: Enable IPV6 for China Unicom
* apns: Enable IPV6 for China Mobile
* Update APNs for O2 Germany & E-Plus
* extract_utils: Fix system_ext framework blueprint generation.
* extract_utils: Add support for system_ext
Project name: proprietary_vendor_oneplus
* sm8150-common: Use source built CameraHIDL lib
Project name: android_vendor_qcom_opensource_system_bt
* Changed HID_DEV_MTU_SIZE from 64 to 512
Thanks all for the support.
Download: https://tugapower.net/TP/OP3-T/TEN/TugaPowerQ12_OP3.zip
MD5: 74e56af2a3bbb3aac1d2de6ea4146807
Please dont mirror for now the roms zips, thanks
Sources :
Rom:- https://github.com/LineageOS
Device:- https://github.com/LineageOS/android_device_oneplus_oneplus3
Kernel:- https://github.com/LineageOS/android_kernel_oneplus_msm8996
Know bugs?
Let me know to add here !
Dash Charging missing
Overall best rom and good performance.
Osama nisar said:
Dash Charging missing
Overall best rom and good performance.
Click to expand...
Click to collapse
You sure it's not dash charging? Or is just missing the dash charging text?
Superfast +++++ ROM!!! Daniel is TOP developer!
My mistake
danieldmm said:
You sure it's not dash charging? Or is just missing the dash charging text?
Click to expand...
Click to collapse
I Think I was wrong. Charging rapidly==Dash charging.
Because phone charge very quick like dash Charging.
Rom is supeerr smooth with zero bugs till now
Osama nisar said:
I Think I was wrong. Charging rapidly==Dash charging.
Because phone charge very quick like dash Charging.
Rom is supeerr smooth with zero bugs till now
Click to expand...
Click to collapse
How's the battery life? It's been 2 months atleast since I've switched to some other ROM... Feeling the need to switch again now!! Hence have restarted some exploration!?
Build 06/20/2020 #OP3-T
Telegram Group: https://t.me/TugaPowerRomOP3T
#TugaPower Q 10.0.0_r37 5.0 LineageOS #laos #OnePlus
If you have some spare bucks consider donating, it will be really appreciated: https://www.paypal.me/TugaPower
If you are on other base rom, best practice is to factory reset prior to flash rom and new gapps.
After this steps if rom does not boot, probably you are encrypted, remove encryption and repeat the steps.
If after removing encryption rom still does not boot, make a factory reset again after flashing rom and gapps, then all will be fine.
Please be sure you are using one TWRP that can handle firmware flash
Advise to use latest official TWRP
Also be sure you are using proper firmware.
Relative to gapps, the advised ones is nano package from open gapps. (ARM64/10/NANO)
OTA built in on rom for updates easly
Three fingers screenshot ( enable in Gestures over Settings )
Support out of the box to microG GmsCore ( http://forum.xda-developers.com/andr...vices-t3217616 )
No more need to make microG system app
PoGO: Gonna catch then all ( Always report using real GPS in case of mock location been used )
What does not works:
Let me know to add to secod post
Changelog: TugaPower Q 5.0
Three fingers screenshot ( enable in Gestures over Settings )
Project name: android_frameworks_base
* Add a LineageOS clock
* AODTile: Rewrite AOD setting handling
* SystemUI: set no hint overlay to highest priority
* SystemUI: Long press Caffeine for infinite duration
* SystemUI: Resolve faulty keyguard clock logs outputs
* SystemUI: Adapt screenshot sound to ringer modes
* [BACKPORT] Config of LTE signal strength default value remove SNR
* SystemUI: Fix pink progress animation color in expanded Wi-Fi tile
Project name: android_packages_apps_DeskClock
* DeskClock: Remove notification sound from firing and snoozing channels
* DeskClock: Replace ViewPager with manual fragment handling
* DeskClock: Fix german translation of "days"
* DeskClock: Properly align settings
* DeskClock: Move navigation bar to bottom
* DeskClock: also apply disabled color to annotations
* DeskClock: Come to the dark side...
* DeskClock: Rework notification channel implementation
* DeskClock: Modernize timer_setup_time look
* DeskClock: Update drawables
Project name: android_device_lineage_sepolicy
* common: Move aux camera whitelist prop to vendor
Project name: android_art
* Revert "Protect/Unprotect regions (region space) only in debug build"
Project name: android_build
* Rewrite test data logic to make it faster
* More performance improvements
Project name: android_frameworks_native
* surfaceflinger: change usageBits type to uint64_t
Project name: android_frameworks_opt_telephony
* Avoid SubscriptionManager#getUriForSubscriptionId calls with invalid subIds
* Remove setIsoCountryProperty method along with partially dead code
Project name: android_system_core
* Fine tune blkio setting to improve boot time
* rootdir: init.rc: use default dirty writeout policy
* adbd: remove ifdefs guarding root/secure.
Project name: android_system_sepolicy
* Export missing audio volume properties
Project name: android_packages_providers_MediaProvider
* MediaProvider: Fix sorting by DATE_TAKEN
Project name: android_packages_apps_Etar
* Etar: Properly align preferences
* Etar: Fix crash when opening "Quick responses"
* Display hour 00 label if there is room for it.
* Don't mess with selected hour when scrolling
* Fix issue #457 and remove other bounces
Project name: android_packages_apps_Recorder
* Recorder: Prevent running into out of memory exceptions
Project name: android_packages_apps_Messaging
* Messaging: Require external legacy storage
Project name: android_packages_apps_Jelly
* Jelly: Avoid unchecked cast warning
* Jelly: Sync color{Primary,PrimaryDark,Accent} with Recorder
Project name: android_bootable_recovery
* recovery: Print the active slot
* recovery: Display recovery version
* recovery: Draw the help message below the menu on non-touch devices
* recovery: Clarify help text
* recovery: Set the INFO color to the recovery/fastboot light color
Project name: android_vendor_lineage
* Update Bulgarian dictionary
Thanks all for the support.
Download: https://tugapower.net/TP/OP3-T/TEN/TugaPowerQ5_OP3.zip
MD5: cab35c7f6b344bed40b06ab02dc0bb84
Please dont mirror for now the roms zips, thanks
danieldmm said:
Changelog: TugaPower Q 5.0
Three fingers screenshot ( enable in Gestures over Settings )
Project name: android_frameworks_base
* Add a LineageOS clock
* AODTile: Rewrite AOD setting handling
Etc....
Click to expand...
Click to collapse
This seems the change log of Lineage, did not find any Tugapower specific change log, options or settings.
What makes Tugapower Tugapower?
Can not find anything about it on the website also, as who are the main dev's, how long it exists, etc...
And is SELinux enforced on this ROM?
Johan2020 said:
This seems the change log of Lineage, did not find any Tugapower specific change log, options or settings.
What makes Tugapower Tugapower?
Can not find anything about it on the website also, as who are the main dev's, how long it exists, etc...
And is SELinux enforced on this ROM?
Click to expand...
Click to collapse
That's normal it's like lineage changelog, rom is based on Lineage, the changes are MicroG support, three finger screenshot, and use of mock locations apps reported as real GPS been using. This 3 things for the time being its the change from LineageOS, and yes, selinux is enforced, if you use without root you can even lock bootloader that rom will boot just fine.
Build 06/28/2020 #OP3-T
Telegram Group: https://t.me/TugaPowerRomOP3T
#TugaPower Q 10.0.0_r37 6.0 LineageOS #laos #OnePlus
If you have some spare bucks consider donating, it will be really appreciated: https://www.paypal.me/TugaPower
If you are on other base rom, best practice is to factory reset prior to flash rom and new gapps.
After this steps if rom does not boot, probably you are encrypted, remove encryption and repeat the steps.
If after removing encryption rom still does not boot, make a factory reset again after flashing rom and gapps, then all will be fine.
Please be sure you are using one TWRP that can handle firmware flash
Advise to use latest official TWRP
Also be sure you are using proper firmware.
Relative to gapps, the advised ones is nano package from open gapps. (ARM64/10/NANO)
Face unlock ( no gapps required ) ( Settings/Security )
OTA built in on rom for updates easly
Three fingers screenshot ( enable in Gestures over Settings )
Support out of the box to microG GmsCore ( http://forum.xda-developers.com/andr...vices-t3217616 )
No more need to make microG system app
PoGO: Gonna catch then all ( Always report using real GPS in case of mock location been used )
What does not works:
Let me know to add to secod post
Changelog: TugaPower Q 6.0
Face Unlock ( no gapps needed )
Project name: android_frameworks_base
* Fix build errors
* Fix BLE transport discovery scan filter
* BT: Relocate A2DP codec strings for translation
* Enable codec change request when mode changes in aptX-adaptive
* Keep a null check before accessing the BluetoothA2dpWrapper APIs.
* Bluetooth: Fix for out of bound exception
* BT Dev: Increase array size for codec selection in Dev Op
* Keep the BluetoothHeadset finalize() method protected
* Bluetooth: Fix for Global reference table overflow issue[1/2]
* BT: Add new intent to broadcast IOT device details
* BT_Audio: Updated Check for TWS+ switch
* TWS_A2DP: Handle active device change between TWS+ earbuds
* audio: Add support for APTX TWSP audio codec
* audio: Add support for audio extended codecs
* Use BluetoothUtils instead of Utils
* GAP: Handle the race condition cases in auto connect logic
* Obex: Squashed commit of the following
* Add scan filter for Transport Discovery data
* Support CALLBACK_TYPE_SENSOR_ROUTING
* Add support for Transport discovery AD type (1/2)
* Bluetooth: TWSP: Support Battery Status information display
* BT: Send info if call is CS type from telecomm service to BT apps.
* GAP: Reset bondingInitiatedLocally flag(1/3)
* Bluetooth-TWS: Disable outgoing connection to 2nd earbud
* Bluetooth-TWS: Disable outgoing connection for 2nd earbud.
* Bluetooth: Rename bluetooth property to support new P Treble rules
* Bluetooth: Unpair both earbuds on unpair.
* Bluetooth: Add SDK API support for TWS feature (2)
* Revert the change: AudioService: remove dead BT code.
* TWS-A2DP: Add TWS+ codec to DevUI support
* BT: Adding aptX-Adaptive codec entry to Framework
* Add BluetoothQualityReport class(1/2)
* TextureVuew rebind GL texture, if AHB content has changed
* SystemUI: QS Details: Fix layout issues
* SystemUI: Fix issue with Bluetooth tile
* SystemUI: Fix QS Detail Header
Project name: android_device_qcom_sepolicy
* sepolicy: cnd: Allow access to wifi_prop
Project name: android_lineage-sdk
* LineageSettingsService: prevent setting net.hostname to null
Project name: android_frameworks_opt_telephony
* Telephony: Add option for using regular poll state for airplane mode
Project name: android_system_bt
* GAP: Reset bondingInitiatedLocally flag(3/3)
* Bluetooth: Enable Hybrid Audio from stack
* Add scan filter for Transport Discovery data
* TWS-A2DP: Add TWS+ codec index
* Bluetooth: Support to know if there is High Def call
* BT: API to update quiet mode status in Adapter service [3/3]
* BT: Adding APTX-Adaptive codec to BT HAL
* Add BLE Scan Phy parameter to scan API
* Bluetooth: Add SDK API support for TWS feature (1)
Project name: android
* manifest: Sync sm8250 HALs
* lineage: Track QTI BT repos
* manifest: Switch to our external/skia fork
Project name: android
* manifest: Sync sm8250 HALs
* lineage: Track QTI BT repos
* manifest: Switch to our external/skia fork
Project name: android_hardware_qcom_audio
* hal: msm8974: Use stereo recording depending on camera orientation
* hal: msm8974: Fix the wrong device for AUDIO_SOURCE_CAMCORDER
Project name: android_hardware_qcom_media
* media: Exclude libplatformconfig from OSS builds
* media: Include display_headers instead of display_intf_headers
* media: libOmxSw encoders require prop headers
* media: Use project pathmap
Project name: android_hardware_qcom_audio
* a2dp: Add a null check before iterating over a2dp.adev->usecase_list
* hal: Add missing includes
* audio_extn: Allow skipping compilation of audio HAL extensions
* audio: Skip libhdmipassthru on OSS builds
* audio: Use direct project pathmap
Project name: android_hardware_qcom_display
* gralloc: Add option for YCrCb venus camera preview
* gralloc: Allow devices to opt-in for YCrCb camera preview
* Add C2D_FORMAT_BT601_FULLRANGE to C2D_FORMAT_MODE
* Add C2D_COLOR_FORMAT_420_TP10 to C2D_YUV_FORMAT
* Don't build lights module if vendor supplies it
* display: Use project pathmap
Project name: android_packages_apps_Etar
* Automatic translation import
* Fix errors caught by aapt2
* Allow app to upgrade database on install.
* Force a manual, incremental sync one time, as early as possible.
* Abort onClick if no Window Focus
* Remove negative margin fron all day label
* Call build() on the Builder, not the Style.
* Small workaround when text is slight bigger then all day event rect.
* Fix small typos in I9490f478681783200a5cb8309a58243723bda4c1.
* Fix bug in recurrent event dialog picker when setting monthly day of the week.
* Add in-memory cache to dismiss alerts that we haven't seen yet.
* Fix mokey NullPointerException when there is no colors to save.
* Fixed ISE issue when subscribing to gcm groups from the main thread.
* Fix crash when dismissing notification.
* Fix calander crash where getTimezone was call without a looper.
* Fix issue with error message being displayed on tablets.
* Remove dead code in AlarmService.
* Display error when a viewed event has been deleted.
* Capitalize Noon and Midnight in event edit view.
* Fixed leak cursor in AlertReciever
* DayView: Revert all whitespace changes
* Etar: Fix invalid string parameter
* Etar: Fix android:targetPackage for shortcut
* Etar: String improvements
* Etar: Restore tests
* AOSP/Calendar - Minimal calendar app.
* Update code coverage filter
* Etar: Fix translatables
* Etar: Fix content provider rebrand
Project name: android_packages_apps_Bluetooth
* Stub TWS related APIs
* GAP: Reset bondingInitiatedLocally flag(2/3)
* BT: API to update quiet mode status in Adapter service [1/3]
* Bluetooth: Enable Hybrid Audio from App
* Add BLE Scan Phy parameter to scan API
Project name: android_packages_apps_Snap
* Snap: Report device orientation to Audio HAL
Project name: android_packages_apps_Settings
* BT: Use translated a2dp codec strings
* codec support for DevUI am: f915bd9438
* BT Settings: Adding aptX Adaptive codec entry in Settings
* Bluetooth-TWS: UI updates based on Filter matched
* Bluetooth-TWS: UI updates based on profile connection.
* Fix build error
* Bluetooth-TWS: Filter TWS devices
* Bluetooth: Create new catogory for earbuds
Project name: android_packages_apps_Dialer
* Fix translation of 'contacts' tab title and main menu.
Project name: android_packages_services_Telecomm
* Bluetooth: Support to know if there is High Def call
Project name: android_vendor_lineage
* qcom: Add UM 4.19 platforms
* qcom: Add atoll platform
* config: Move default alarm/notification/ringtone sound props to /product
Thanks all for the support.
Download: https://tugapower.net/TP/OP3-T/TEN/TugaPowerQ6_OP3.zip
MD5: 5bffb0b44a1f4716462d27fd7d0ed6d2
Please dont mirror for now the roms zips, thanks
Super fast ROM. TOP!
Build 10/07/2020 #OP3-T
Telegram Group: https://t.me/TugaPowerRomOP3T
#TugaPower Q 10.0.0_r37 7.0 LineageOS #laos #OnePlus
If you have some spare bucks consider donating, it will be really appreciated: https://www.paypal.me/TugaPower
If you are on other base rom, best practice is to factory reset prior to flash rom and new gapps.
After this steps if rom does not boot, probably you are encrypted, remove encryption and repeat the steps.
If after removing encryption rom still does not boot, make a factory reset again after flashing rom and gapps, then all will be fine.
Please be sure you are using one TWRP that can handle firmware flash
Advise to use latest official TWRP
Also be sure you are using proper firmware.
Relative to gapps, the advised ones is nano package from open gapps. (ARM64/10/NANO)
Face unlock ( no gapps required ) ( Settings/Security )
OTA built in on rom for updates easly
Three fingers screenshot ( enable in Gestures over Settings )
Support out of the box to microG GmsCore ( http://forum.xda-developers.com/andr...vices-t3217616 )
No more need to make microG system app
PoGO: Gonna catch then all ( Always report using real GPS in case of mock location been used )
What does not works:
Let me know to add to secod post
Changelog: TugaPower Q 7.0
Project name: android_device_oneplus_oneplus3
* op3: Rollback to stock GPS blobs and disable QC location
* op3: Checkout pie gps config
* op3: Fix build errors with libgps.utils.so
Project name: proprietary_vendor_oneplus
* op3: Switch back to pie gps blobs
Project name: android_packages_apps_Etar
* Update readme (#728)
* Release new 1.0.22 version (#725)
* Make use of system theme setting on android 10 (#715)
* update submodules
Project name: android_packages_apps_Dialer
* Dialer: Use a DayNight launch theme
Project name: android
* manifest: Track AOSP TV app
Project name: android_packages_apps_Settings
* Settings: Fix fallback summary for power_button_instantly_locks preference
Project name: android_packages_services_Telephony
* Explicitly grant START_ACTIVITIES_FROM_BACKGROUND to com.android.phone.
Project name: android_device_qcom_sepolicy
* sepolicy: cnd: Fix wifi_prop neverallow for compatible props
* sepolicy: cnd: Allow access to wifi_prop
Project name: android_hardware_qcom_display
* gralloc: Add option for unaligned YCrCb pixel format
Project name: android_frameworks_base
* Fix typos related to sortSelectionIndices
* Fix app crash if the selection is from reverse direction.
* SystemUI: Call setOnlyAlertOnce(true) for PowerShare notification
* BLE: Fix NPE during start advertising
* Explicitly grant START_ACTIVITIES_FROM_BACKGROUND to com.android.phone.
Project name: android_vendor_lineage
* Export CAF msm-4.14 audio headers
Project name: android_vendor_qcom_opensource_system_bt
* AVRCP: Ignore AVRCP version when registering absolute volume feature
Thanks all for the support.
Download: https://tugapower.net/TP/OP3-T/TEN/TugaPowerQ7_OP3.zip
MD5: 5bffb0b44a1f4716462d27fd7d0ed6d2
Please dont mirror for now the roms zips, thanks
Since Q6 has already been released I guess you wanted to say Q7: TugaPowerQ7_OP3.zip
Primokorn said:
Since Q6 has already been released I guess you wanted to say Q7: TugaPowerQ7_OP3.zip
Click to expand...
Click to collapse
Indeed, bad typo. Thanks for the heads up. Link fixed.
The rom is well builded. Great work ?
Is normal that the rom ain't come with a camera app? ? And have tried 7/8 versions of gcam, they all are FC. Same with oneplus camera app too.
Build 19/07/2020 #OP3-T
Telegram Group: https://t.me/TugaPowerRomOP3T
#TugaPower Q 10.0.0_r40 9.0 LineageOS #laos #OnePlus
If you have some spare bucks consider donating, it will be really appreciated: https://www.paypal.me/TugaPower
If you are on other base rom, best practice is to factory reset prior to flash rom and new gapps.
After this steps if rom does not boot, probably you are encrypted, remove encryption and repeat the steps.
If after removing encryption rom still does not boot, make a factory reset again after flashing rom and gapps, then all will be fine.
Please be sure you are using one TWRP that can handle firmware flash
Advise to use latest official TWRP
Also be sure you are using proper firmware.
Relative to gapps, the advised ones is nano package from open gapps. (ARM64/10/NANO)
Face unlock ( no gapps required ) ( Settings/Security )
OTA built in on rom for updates easly
Three fingers screenshot ( enable in Gestures over Settings )
Support out of the box to microG GmsCore ( http://forum.xda-developers.com/andr...vices-t3217616 )
No more need to make microG system app
PoGO: Gonna catch then all ( Always report using real GPS in case of mock location been used )
What does not works:
Let me know to add to secod post
Changelog: TugaPower Q 9.0
Project name: android_frameworks_base
* Teaches the ProcessCpuTracker about USAPs.
* Adds Zygote policy flags to control how applications are launched
* Start process of next activity with top priority in advance
* Fixed an issue Zygote initialization.
* Improved timekeeping logic for USAP Pool refill mechanism.
* Resets the refill action/timing info after a pool fill event.
* Make the USAP Pool refill delay configurable.
* Re-adds a trace point that was accidentally removed.
* Moved some thread priority changes.
* Adjust Java Language thread priority in new processes.
* Adjusts the USAP pool refill mechanism.
* Change USAP name to application name as soon as possible.
* SystemUI: Use regular global_actions_column layout for layout-sw600dp-land
* SystemUI: use DOUBLE_TAP_TO_WAKE setting also for wake from aod
* fw/b: Add support for per app network isolation
Project name: android_packages_apps_Settings
* Settings: Add support for per app network isolation
Project name: android_packages_apps_Jelly
* Jelly: Fix find in page functionality
Project name: android_packages_apps_DeskClock
* DeskClock: Setup data model before calling super.onStart()
Project name: android_hardware_qcom_display
* gralloc: Add option for unaligned YCrCb/YCbCr pixel format height
Changelog: TugaPower Q 8.0
Project name: android
* July Security Update ( android-10.0.0_r40 )
Project name: android_vendor_lineage
* lineage: update GMS updater component disable list
* Remove deprecated backup overlay
Project name: android_vendor_qcom_opensource_packages_apps_Bluetooth
* Clean up duplicate uses-permission entries
Project name: android_device_oneplus_oneplus3
* tunned GPS little more
Thanks all for the support.
Download: https://tugapower.net/TP/OP3-T/TEN/TugaPowerQ9_OP3.zip
MD5: bf5cc768f423a778a0227e768499f549
Please dont mirror for now the roms zips, thanks
lapirado said:
The rom is well builded. Great work
Is normal that the rom ain't come with a camera app? ? And have tried 7/8 versions of gcam, they all are FC. Same with oneplus camera app too.
Click to expand...
Click to collapse
ROM does comme with Snap cam ( default from lineage OS )
Gcam also works just fine with rom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Fingerprint no longer works after disabling airplane mode. Could you always allow fingerprint (also at boot)?
Primokorn said:
Fingerprint no longer works after disabling airplane mode. Could you always allow fingerprint (also at boot)?
Click to expand...
Click to collapse
After boot it's a Android requirement you type password/pin prior to use fingerprint
Related
CyanogenMod 10.1.2 | Jellybean 4.2.2 - KANG
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is an enhanced open source firmware distribution for smartphones and tablet computers based on the Android mobile operating system. It offers features and options not found in the official firmware distributed by vendors of these devices. Features supported by CyanogenMod include native theming support, FLAC audio codec support, a large Access Point Name list, an OpenVPN client, an enhanced reboot menu, support for Wi-Fi, Bluetooth, and USB tethering, CPU overclocking and other performance enhancements, soft buttons and other "tablet tweaks", toggles in the notification pull-down (such as wi-fi, Bluetooth and GPS), app permissions management, as well as other interface enhancements. CyanogenMod does not contain spyware or bloatware. In many cases, CyanogenMod may increase performance and reliability compared with official firmware releases.
Source: CyanogenMod Wiki
Screenshots
Installation Instructions
Requirements
* Rooted (obviously)
* Firmware 3.32/3.33. Read this post for more info and download link CLICK HERE
Installation
1: If you are coming from another ROM do a full wipe
1a: if this is just an update to THIS ROM BASE you can simply wipe cache and dalvik cache
2: Flash gapps (download below)
3: Reboot
3b: If you want to make changes to the CPU/GPU clock speeds, I/O, or CPU governor settings, edit /system/etc/init.d/99kernel (outlined below)
4: Enjoy CyanogenMod 10.1
Please read the whole post for changelog, Download links, and other important info
Please also take the time to check out this great FAQ and General Support thread created/moderated by Skipjacks It contains a lot of useful information, It would also be great if users try to keep general Q&A questions and other ROM discussion in this thread, It will help weed out the non-development posts and make things go fater for me, which means faster development for you
Updates:: CM has reached 10.1 stable. I will still release bugfix updates if needed but this should be as stable as stable can be on the Sensation. Here's to AOSP 4.3
. As always: remember it takes a FULL charge from AC, and a full discharge then re charge batteryt to be accurate. Also leave it plugged in for up to an hour at 100%, Another thing i find helps battery life is to make custom auto-adjustment values if you use auto-brightness. Check below for full changelog Feedback always welcome Please read the Kernel section for more info and full config options for the kernel.
Albinoman887
Working
SMS/MMS
Wi-FI
Data
GPS
Audio
Radio
Camera
Gnow
SD Card
Bluetooth
H/W Accelerated Video Playback
Native Wi-Fi Tethering
1080p Video Recording
Not Working
??????????
Changelog
Aug-6
* Fixed issue with microphone not working in apps
* Synced with upstream
Aug-4
* Synced with upstream, this is probably gonna be the last cm-10.1 build unless there is a bug fix or something as development has died down on that branch
* Got a dedicated server as a mirror with super fast internet connection. i'm still gonna use goo for the ota updates but the link here will be to the new server
July-20
* CM was tagged 10.1.2 - Security fixes
* Any upstream CM changes since last release (a lot of "under-the-hood" changes)
* Sweep2wake issue with waking on home might be fixed
July-10
* CM was tagged 10.1.1
* Fixed issue with flashlight turning off when screen is off (finally, yay)
* Upstream Changes
* UNTESTED: Fixed issue with sweep2wake and home button waking screen
July-2
* Fixed settings FC when removing an app
* Fixed rare issue of trashed framebuffer (garbled display)
* Kernel: Added FauxSound (requires app)
* Upstream Changes
June-26
* CM-10.1 is now tagged stable!
* ROM is now compiled with linaro and -o3 optimizations
* Misc cleanup
June-10
* Kernel updated to Linux 3.0.80
* Bugfix: Incorrect report of data-usage (upstream bug)
* More Upstream changes - CM-10.1 RC5 mainly
* Sorry for the delay of relase was enjoying the rare good weather around here
June-1-build2
* Superuser bug from last release is fixed now
* Kernel updated to Linux 3.0.80
* Some upstream changes
June-1
* CM is now RC3/4
* Really fixed issue with no audio in hangouts
* Tried to address reboots in last build by reverting the pmem change a week or so ago
* Many upstream changes
May-24
* Reverted back to Linaro GCC 4.7 (I think it might have been causing some hard-reboots, plus we get better benchmarks with 4.7)
* Upstream: Updates to audio-caf repo that should fix the issues with the new Hangouts
* Now CM-10.1 RC2+
* Various upstream changes (mainly translations and a few minor bug fixes)
May-17
* In very rare cases the framebuffer was being trashed which was causing screen flicker, this is now fixed
* Fixed bug with homescreen and big margins on clean install
* Kernel now compiled with Linaro GCC 4.8 toolchain (more optimizations)
* Upstream Changes: CM-10.1 RC2
May-10
* Kernel: Switched back to PM_MAX (low-power wifi) when screen is off, no real benefit
* Kernel: Added a couple build optimizations to GPU drivers
* Kernel: Updated to Linux 3.0.77
* Upstream Changes (CM is gearing up for RC1)
May-3
* Reverted T-Mobile data drop change to as it caused issues with data. Users who still want this patch can find it in the build.prop as a comment, Delete the # and the above line and save
* Fixed a few remaining issues with charging docks
* Enabled UID stat in kernel, Allows data usage stats.
* Re-enabled scrolling tweaks
* Upstream changes
May-2
* Fixed bootloops with charging docks that also have MHL support (no this doesn't fix MHL)
* Kernel updated to Linux 3.0.76
* Fixed data drop issue on T-Mobile
* Upstream changes
* Minor code cleanup
May-1
* All glitches during video playback fixed (all credits go to arco for finding this fix)
* Some updates to PMEM driver in kernel
* Various other updates to kernel from CAF jb kernel
* No longer using forks of frameworks/native or av due to our patches being merged
* Upstream Changes
April-26
* Enabled Fast-charge by default
* Removed debug.composition.type to fix ghosting
* Tried to address battery drain by reverting the updated battery drivers
* Re-merged ondemand governor from old kernel (trying to fix battery drain)
* Kernel updated to Linux 3.0.74
* Upstream Changes
April-23
* Kernel: Lots of updates to framebuffer from CAF jb-chocolote.
* Kernel: More updates to vidc from CAF kernel.
* Kernel: Spped optimizations and tweaks, minor but noticable
* Bugfix: Tearing
* Various Upstream Changes
April-19
* Switched debug.composition.type build.prop setting back to "dyn" (seems to save battery)
* Display: Display repo is now real cm-10.1 source just with pmem support added back in (old repo was cm10 code)
* Display: Tweaked auto-brightness ranges, and added an extra step, seems to save battery
* Media: Media repo is now real cm-10.1 sorce with pmem support
* Kernel: Updated KGSL/adreno drivers(caf) for repo with new display repo
* Kernel: Updated genlock(caf) for use with new display repo
* Kernel: Sweep2wake hack added (should fix freezing touch screens, (to a point, not completely)
* Kernel: Switched ondemand governor back to one included in msm8660 kernel (was using old one)
* Kernel: Updated to Linux 3.0.73
* Credits: All credits or the display/media updates goes to arco
* Upstream Changes
April-13
* Bugfix: Tried to address remaining lag issues by tweaking kernel (all changes listed here were in my kernel test build)
* Kernel: Reverted mpdecision to old version
* Kernel: Reverted patch to force GPU to scale one freq at a time
* Kernel: Removed duplicate dynamic fsync procoess
* Kernel: Set readahead buffer back to default (128kb)
* Kernel: silenced some useless logging in DMESG
* General Upstream Changes
April-11
* Bugfix: all lag should be gone now, somehow the build was curupt
* Bugfix: logcat spam of HWC_FRAMEBUFFER_TARGET
* Bugfix: 3D GPU OC wasn't being set correctly because there was a missing chmod line, added.
* Switched back to gpu.composition.type to gpu, its the defualt in 4.2 and has best performance
* Switched to audio-caf variant (repo) I fixed the VOIP bug with it before. hopefully this will fix the "robotic" calls some people have (audio also seems to be a higher volume)
* Tweaked the display repo to help with video glitches
* Kernel: KGSL updated to CAF (seems to give better gpu performance, and higher benchmark) (credis: midnight88)
* Kernel: adreno updated to CAF (more up to date) (midnight88)
* Kernel: msm updated to CAF (midnight88)
* Kernel: some upstream patches to vidc (jb-mr1-chocolote) CAF
* Kernel: properly added Sweep2Wake
* Optimized the kernel a bit more
* Lots of upstream changes. (pretty sure M3 was tagged)
* maybe some other litte things I forgot, check github
April-7
* Kernel: Complete rebase off of msm8660-common kernel, All the speed and features of my original kernel are still there, just streamlined for easy merging of new caf stuff
* Kernel: updated to Linux 3.0.72
* Kernel: Updated vidc drivers to jb-chocolote from caf (1/2)
* Kernel: Updated vidc drivers to jb-mmr1-chocolote from caf (mr1 = aosp 4.2) (2/2)
* Kernel: Updated adreno drivers (note: we are still using old libs)
* Kernel: Updated bluetooth to jb-chocolote from caf
* Kernel: Updated qdspv6v3 to jb-chocolote from caf
* Kernel: Added USB HID support to kernel
* Kernel: Added USB OTG to kernel
* Kernel: Added updated mpdecision by showp1984
* Display: hwcomposer updated to 1.0
* Display: kernel now correctly reports refresh rate to gralloc
* Display: Allow to build with MDP-4.1 (somewhat fixes video artifacts)
* Switched composition.type=dyn to mdp in build prop
* Updated vidc firmware to match new vidc in kernel
* Updated liblights
* Fixed build.prop so GooManager will notify of new versions
* Lots of upstream Changes (check gerrit for details)
* Bugfix: Upstream: cLock: switched to new API (old one was taken down???)
* Cleaned up kernel config script
* Bugfix: Fixed HWC in framebuffer target logcat spam
* Bugfix: blending in video playback bug has been somewhat squashed, not 100% yet, tested with BSPlayer
* General cleanup
Mar-31
* Added x264 1080p video recording and camerawrapper commit from gerrit
* Thumbnails for recorded videos are now fixed
* Increased wi-fi scan interval a bit
* Fixed disapearing OSD in video player etc (no need to disable h/w overlays)
* Cleaned up display-legacy repo
* Upstream Changes
Mar-28
* Added setting to allow lockscreen to rotate (disabled by default) you must uncomment the lockscreen_rot_override line in build.prop
* Upstream: Removed Pie settings for devices with hardware keys
* Other upstream changees. Check review.cyanogenmod.org for details
Mar-27
* Switch to PM_FAST when screen is off
* Frameworks/av is now 100% CyanogenMod (cyanogen added legacy camera prarms so evervolv cherry picks are not needed)
* Host of updates to media and display
* Upstream Changes
Mar-24
* Reverted change to PM_FAST as there was no benefit and comsumed more battery
* Added lazy and conservate CPU governors to kernel
* Raised Volume levels a bit (thanks erraggy)
* Tried to address video tearing (not completely gone)
* Upstream Changes
Mar-22-build2
* Sorry completely borked the audio_policy.conf, fixed now
Mar-22
* Fixed GooManager not notifying about updates, After this build install it should notify you
* Re-enable FM Radio (got lost in merge)
* dalvik cache is back in cache now
* Kernel base updated to Linux 3.0.70
* Upstream Changes
Mar-21
* Merged my device tree with Team-Hydra repo, All future roms will be based on this, Check OP for details
* Updated Kernel base to 3.0.69
* Added frandom support to kernel for people who want it
* Switched to PM_FAST in kernel (high power wi-fi when screen is off)
* Host of upstream Changes
* Cleanup
Mar-15
* Upstream Changes
Mar-14 (internal)
* Upstream Changes (mainly translations)
Mar-13 (internal)
* Re-added a couple build.prop settings (mainly data/network related)
* Disabled libv8 optimizations since we don't have the correct qcom props (thanks intervirgil)
* Forgot to change governor to ondemand when i added back the configs for it in the init script
* Cleaned up the sweep2wake configuration
* Changed kernel version string back to ChronicKernel, Kernel is so heavily modified now it deserves it's own name
* Upstream: frameworks/base: Added Volume Tile to Quicksettings
* Upstream: Phone: Settings: do not override network mode on read
* Upstream: cLock: Fix error when the weather data from Yahoo is incomplete
* Many upstream translations changes and other small things not worth listing here
Mar-11-build2
* Reverted the removal of CPU min/max freq, CPU gov, and I/O (ondemand still default)
* Upstream changes
Mar-11
* Updated kernel base to Linux 3.0.68
* Removed settings from kernel init script that can be configured in CM's Performance settings menu
Note: init script still sets min cpu freq to 384mhtz as its still strongly advised
* Set default governor to ondemand
* Added support in kernel init script to enable tun.ko
* Upstream changes. I think there were some updates to DeskClock (alarm clock) and a few other minor updates
Mar-9
* Fixed video recording with FFC. If you still get Force Closes clear data and cache for Gallery
* Imported bruce's media_codecs.xml and media_profiles.xml (this is what fixed FFC video recording)
* Minor upstream changes
Mar-8 (Internal)
* Fixed Volume Rocker Wake not showing in Settings>Display
* Reverted CRT Hack in kernel - Not needed for cm-10.1
* Now using Team-Hydra display-legacy and media legacy repos as they are maintained
* Switched to Team-Hydra frameworks/av repo as it has a more complete Camera patch
* Merged new KGSL from bruce's kernel
* Upstream Changes including new weather icons for cLock
* Minor cleanup and changes
* Wallpaper reseting to default should be fixed (I guess this was a side-effect of small PMEM MDP)
Mar-7
* Minor tweak to pmem to fix AOSP_BASE growing into framebuffer (very rare that this would happen anyway but fixed)
* Switched back to the other display-legacy and media-legacy repos i was using as they are being kept up to date by the maintainer
* Upstream changes
Mar-6
* Finally figured out the math behind mapping pemem so I could increase its size without trashing FrameBuffer
* Soft-reboots should be gone now due to the PMEM increase
* A Couple cherry-picks that might help with video playback (probably not though)
* Upstream: Switched to new superuser by koush
* Other upstream changes I don't remember. Check Gerrit for details.
Old Changelogs
Kernel
ChronicKernel
Kernel now based on Bruce's kernel with a few changes by me, including:
* Compiled with linaro
* Set flash to disable if battery is below 10% to prevent the random shut-off when taking a pic
* Removed/Disabled KSM
* Removed ZRAM
* User-configurable GPU OC (Not OC'd by default)
* Optimized and compiled with with the "Optimize a lot, or -o3 option)
* Added more I/O schedulers
* Tweaked voltages a bit
* Reverted CRT hack to smooth animation in Android 4.2.2
* Increased PMEM_MDP as it is needed in Android 4.2.2 to fix soft-reboots
* PM_FAST enabled by default (high power wi-fi when screen is off)
These settings were changed by me to help make the kernel more stable with our ROM, observed with tests by me. If you want more features of the Sultan kernel feel free to flash it, but support will not be provided in this thread.
Other Features of the kernel include:
* OC to 1866Mhtz (default 1566Mhtz)
* Undervolted
* User-configurable CPU OC
* User-configurable CPU default governor (ondemand = default)
* User-configurable I/O scheduler (default = SIO)
* User-configurable badass gonvernor (default = balanced)
* Sweep2Wake
You can edit many of the settings in /system/etc/init.d/99kernel, here is a snippet of the script with all the config options
Kernel init script: Click Show Content to expand
Code:
#Script originally made by Axetilen. Modified by Sultan (android1234567)
#Updated for albinoman887's ChronicKernel (98% of the credit goes to android1234567. Thanks so much man :)
# Configure your options here #
# Config default CPU Gonvernor (Disabled by default: When disabled uses internal Kernel setting)
# For better battery life switch to badass
# Kernel Default: ondemand
# Possible values
# badass
# ondemand
# interactive
#= lagfee
# performance
GOV=ondemand;
# Config I/O scheduler
# deadline
# cfq
# noop
# vr
# sio (default)
IO=sio;
# Config CPU max frequency
# Default: 1566000 (1566Mhtz)
# Overclockable to - 1836000 (1836Mhtz)
# for badass set to 1566mhtz (best performance/battery life)
MAXFREQ=1566000;
# Config CPU min frequency
# Default: 384000 (384Mhtz)
# Range 384000 - 1944000 (384Mhtz - 1944Mhtz)
MINFREQ=384000;
# Config 3D GPU clock
# 228571000 = 228mhz
# 266667000 = 267mhz (default)
# 300000000 = 300mhz (Recomended For balance of Performance and Battery life)
# 320000000 = 320mhz
GPU=266667000;
# Config 2D GPU clock
# 145455000 = 145mhz
# 160000000 = 160mhz
# 200000000 = 200mhz (default)
# 228571000 = 228mhz (Recomended For balance of Performance and Battery life)
# 266667000 = 267mhz
DD=200000000;
# Badass
# possible values
# 1 = performance
# 2 = balanced
# 3 = battery saving
BADASS=2
# Enable Sweep2Wake
# 0 = disabled (default)
# 1 = enabled
# 2 = enabled (with no button backlight during sweep)
SWEEP=0
# Enable Fastcharge
# 0 = disabled
# 1 = substitute AC to USB charging always
# 2 = substitute AC to USB charging only if there is no USB peripheral detected
FASTCHARGE=0;
# Fsync Control
# Disabled by default (recomended)
# 2 = Fsync disabled
# 1 = Fsync enabled
FSYNC=2;
# TUN
# Disabled by default
# 0 = Disabled
# 1 = Enabled
TUN=0
# End of configurable options #
Please note this is not the full script just a small portion, Check /system/etc/init.d/99kernel for the full script
Bugs
* MHL doesn't work
* Sweep2wake sometimes causes issues with the proximity sensor during calls
Notes
* As of Feb-19 CyanognMod changed the way the reboot menu works. To enable the "Advanced Reboot" menu with recovery and bootloader go to Settings>Developer Options and Check Advanced Reboot
* As of AOSP 4.2.2 ADB now has a whitelist feature. On first connect with adb it will say device offline You need to update your ADB then with the phone connected. Disable and Re-Enable Android Debugging in the Developer Options menu. It will ask if you want to accept and show the PC's RSA key. Select Yes and it will now work as expected
* If your homescreen does not look right (big margins) go to System Settings>Launcher>homescreen[/B] click Stretch screens. Then choose grid size and set rows to 5.[
* As of AOSP 4.2.1 Developer Options and Performance setting menu options are hidden until you go into about phone and tap build number repeatedly (aprox. 6 times) this only needs to be done once
-2
* If you are having a lot of soft reboots when waking the device set you min CPU freq. to 384htz in Performance settings. (What? no Performance settings? ummm look up hehe)
* If you are coming from another ROM i highly recommend you perform and Wipe Date/Factory Reset in recovery menu when applying this ROM.
* The gapps linked to does not have photosphere. As far as i know it's not supposed to. If you want photophere search for the flashable zip
* If you can't get MMS to work. Send yourself a MMS. or just wait a day. eventually they will work again
* For the best battery life I suggest the stock settings with the exception of the ONDEMAND governor. Switching to BADASS will yield best battery results
DOWNLOAD
ROM : cm-10.1-20130806-Albinoman887-pyramid.zip
Gapps : gapps-jb-20130301-signed.zip
Goo.im Repo : CLICK HERE
* This ROM can also be downloaded directly with GooManager *
Source Code
Team Hydra Github (main): https://github.com/Team-Hydra
CyanogenMod Github: https://github.com/CyanogenMod
Personal Github: https://github.com/Albinoman887
Credits
* First off of course cyanogen, the CyanogenMod project and all who contribute.
* Bruce2728 for doing all the leg-work originally to get get CM-10 on our Sensation, most of which was used for CM-10.1
* Evervolv Team for their device tree. This was largely what was needed to get the build going.
* mikez for all his work on the Evervolv/pyramid tree.
* NLJ for making the diff patch of Evervolv's frameworks_av repo to get camera working
* jiggs82 for all his helpful hints.
* And any and all users in this thread who contirbuted or will contribute to making this ROM as stable as possible
* dastin1015 for answering all my n00bish questions, and providing helpful hints and solutions
* android1234567 for all the help with the kernel, without you we wouldn't have new kernel
* tarfu for fixing camera p2z
* blahb14hblah for his hint to the extra scrolling tweak in frameworks/base
* NLJ for fixing the Sweep2Wake proximity sensor issue
* Skipjacks for maintaining the Q&A thread
* A bunch of thanks to arco, for all his updates to our kernel, our display libs, our media libs, and for fixing the video playback glitching, and for being a good friend and dev mentor.
Donations
I really didn't want to do this but people keep asking so here is a donation link if you want to buy me a coffee or pack of smokes (I go through a lot sitting on the PC messing around lol) go ahead. But not required or expected by any means
Note: The name on the paypal account may say patricia, this is because it's a family paypal account.
For more information like compiling, see 2nd post
Happy Flashing
Albinoman887
Old changelogs
Feb-6
* Fixed GPS not working from last build
* No longer build from gps-legacy, use CM source
* Upstream: Contacts: Lots of clean up and optimization
* Other upstream changes I am not listing here. Check gerrit for more details
* Kernel: Added mpdecision fix for freq <384hmtz (still not not advised) credits: android1234567
* Kernel: Updated to Linux 3.0.62
Feb-4 Build 2
* Fixed pinch to zoom for camera (all credits go to tarfu)
Feb-4
* New kernel base
* User Configurable GPU Overclock. (/system/etc/init.d/89kernel)
* Removed Sweep2Wake
* CPU Overclockable to 1.94Ghtz
* Undervolted CPU a bit more
* Kernel now compiled iwith Linaro
* Added scrolling build.prop tweaks
* Increased Wi-Fi voltage
* Upstream Changes
* Cherry picked commit for Contects that will maybe improve scrolling
Feb-2
* Native WiFI tether works
* Preliminary FM Radio support
* Upstream Changes
* Overall snappier do to optimization
Jan-31
* Reverted native tether fix to fix the SSID scanning
* Removed bcmhd module from device tree as its in kernel
* Upstream changes
Jan-30
* Fixed LocationProvider Wakelock
* Fixed 1080p video recording
* Fixed Native WiFI Tethering (have only tested with unsecured network)
* Upstream Changes
* Updated local_manifest.xml for people compiling from source (will soon just start hosting it on github)
Jan-29
* Really fixed GPS
* Fixed WiFi Tethering (Barnacle only))
* Cherry picked a bT patch for 48 htz playback
* Fixed volume
* Removed mpdecision (kernel has this)
* Updated build.prop to be in-line with bruce and others
* Anyone who was having slow data should be fine now
* Updated kernel to Linux 3.0.61
* Sweep2Wake disabled by default (could very well be cause of batt drain and sensor issues)
* Probably some other changes I forgot
Jan-27
* Fixed GPS
* Possibly fixed Bluetooth Issues
* Upstream Changes
Jan-26
* Removed Evervolv default wallpaper (i'm an idiot)
* Cleaned up code (reverted some changes by Evervolv)
* Tryed to fix the bugs with bluetooth but have no device's to test it with
* Upstream Changes as of 11am PST
Jan-25
* Fixed some Display glitches
* Removed thermald.conf to match bruce's branch
* Switched Kernel base - (OC/UV - Thanks bruce)
* Upstream changes
Jan-24-Build2
* Fixed Camera
* Fixed Signal Strength icon
* Re-added Torch
Jan 24
* initial build
Compiling
first create the folder structure for your source. I suggest creating android/system n your home directory.
Now cd into this directory enter this command
Code:
repo init -u git://github.com/Team-Hydra/android.git -b cm-10.1
repo sync
Once you have done that your ready to go. simply run:
Code:
. build/envsetup.sh
. vendor/cm/get-prebuilts
lunch cm_pyramid-userdebug
mka bacon
make sure before you start a new build to always run make clobber
If anyone would like to help bug bash with me feel free. if you make any progress send me a pull request
Happy Flashing!
Albinoman887
albinoman887 said:
Everyones a n00b. Bruce was a n00b at one point so was vorbeth. i remember bruces first post. IT WAS EXACTLY LIKE MINE a big rant about how he just through **** together to get it to work and it went from there. If it wasnt 5 am maybe i would have made the thread all nice and neat but meh take it or leave it. better then whats out there. I dont see you contributing
Click to expand...
Click to collapse
For developer options menu you have to tap the build number a few tines to enable it, that's how it is in 4.2
Jiggs82 said:
For developer options menu you have to tap the build number a few tines to enable it, that's how it is in 4.2
Click to expand...
Click to collapse
Ha! Thanks man now i have my CPU settings back
do u have to do it every boot?
albinoman887 said:
Ha! Thanks man now i have my CPU settings back
do u have to do it every boot?
Click to expand...
Click to collapse
No problem and nah you don't bro
Sorry for asking but is this stock android as I would get it on a nexus device? Currently I'm on bruce's build and I really like the look and feel of Android. Don't want to miss that. Thanks for your effort.
Re: ]ROM]+[DEV]+[Alpha] CM10.1 AOSP 4.2 Jellybean [KANG]
Yes its exaxtly like bruce's just newer. I still need to upload a compiled build check back in an hour and 45 mins I will be home thwn to upload ir
Sent from my HTC Sensation using Tapatalk 2
Re: ]ROM]+[DEV]+[Alpha] CM10.1 AOSP 4.2 Jellybean [KANG]
@jiggs82 Thanks for the info. And thanks for contributing istrad of just being a troll
Sent from my HTC Sensation using Tapatalk 2
Is the 3D performance fixed, glitches, 3D games artifacts and texture ghosting? MHL?
Great to see the community is on to something, but I'm gonna pass this one because the camera is shot :/
but still would love to hear how it performs, hope it has potential
albinoman887 said:
CyanogenMod 10.1 Jellybean 4.2 - KANG
Working:
SD Card
Audio
Radio
SMS
WiFi
Bluetooth
Not Working
Camera
Click to expand...
Click to collapse
I got it to work except 1080p recording (you can select 1080p mode but it doesn't start recording)
Could you check if GPS is getting a fix on your build?
Must have screwed something cause it keeps searching for location and never gets one :/
I can share my build here (if you don't mind of course) I'm not sure how much time I can put into this project so I'm hesitating about creating another thread
Best regards
NLJ
Re: ]ROM]+[DEV]+[Alpha] CM10.1 AOSP 4.2 Jellybean [KANG]
If you want check out my github by the same user name if u fix anything send me a pull request. I'll chrck gps but I remember when looking through the make files I saw something about gps that cought my eye. I'll test my gps right now though is your build much different then mine? Oh and to the guy about the can, evervolv has it working so it can be done
EDIT: just tested gps, it works
Sent from my HTC Sensation using Tapatalk 2
is your build much different then mine?
Click to expand...
Click to collapse
Don't think so Sources are the same (and I believe I've hinted you with that singleton fix on Gerrit )
Have look at https://www.box.com/s/1fh69wo3nqxujv887gph
frameworks_av.diff shoud get you working camera and you can see my build there too
Now I wonder how did I manage to screw gps...
To make things clear:
Camera fix patch is heavily based on what is Evervolv repos. I just picked only what was necessary to get this going. Some CameraParameters.cpp entries I've added by checking what is needed by lib/hw/camera.default.so
Sv: ]ROM]+[DEV]+[Alpha] CM10.1 AOSP 4.2 Jellybean [KANG]
NLJ said:
Don't think so Sources are the same (and I believe I've hinted you with that singleton fix on Gerrit )
Have look at https://www.box.com/s/1fh69wo3nqxujv887gph
frameworks_av.diff shoud get you working camera and you can see my build there too
Now I wonder how did I manage to screw gps...
To make things clear:
Camera fix patch is heavily based on what is Evervolv repos. I just picked only what was necessary to get this going. Some CameraParameters.cpp entries I've added by checking what is needed by lib/hw/camera.default.so
Click to expand...
Click to collapse
GPS works fine on your build, just tested it
Edit: And I think this would fix the signal-indicator: https://github.com/Evervolv/android...mmit/13401c837fe32f22d81a351e23eb9724c00c9e4e
Sent from my Nexus 7 using xda premium
The_Hamster said:
GPS works fine on your build, just tested it
Edit: And I think this would fix the signal-indicator: https://github.com/Evervolv/android...mmit/13401c837fe32f22d81a351e23eb9724c00c9e4e
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Sort of. He needs to get the patch for /telephony as well.
Re: ]ROM]+[DEV]+[Alpha] CM10.1 AOSP 4.2 Jellybean [KANG]
All I did to fix signal icon was remove gsm from the end of the line with signalstrngh and the defaault_wireless_network=0
Sent from my HTC Sensation using Tapatalk 2
Re: ]ROM]+[DEV]+[Alpha] CM10.1 AOSP 4.2 Jellybean [KANG]
The_Hamster said:
GPS works fine on your build, just tested it
Edit: And I think this would fix the signal-indicator: https://github.com/Evervolv/android...
Sent from my HTC Sensation using Tapatalk 2
Click to expand...
Click to collapse
LaidbackNikez said:
Sort of. He needs to get the patch for /telephony as well.
Click to expand...
Click to collapse
which patch is this? is it the ones in frameworks base and frameworks/opt/telephoney about if above a certian RIL use COMA/ i woulnt think so but ive been wrong before. its the only recent open patch i can find related to telephony. what would it fix? i have a signal bar now
Running your rom now so far so good. Keep up the good work
Re: ]ROM]+[Alpha] CM10.1 AOSP 4.2.1 Jellybean [KANG]
Do we need to flash 4.2.1 gapps?
Sent from my HTC Sensation using xda premium
AW: ]ROM]+[Alpha] CM10.1 AOSP 4.2.1 Jellybean [KANG]
That's funny. The cam makes photos, but you can't See anything before you make the photo.
Gesendet von meinem HTC Sensation mit Tapatalk 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Bliss is pleased to present to you
Bliss 6.0
Bliss is one of the most highly customizable roms that you can install on your mobile device, and we hope you have a truly blissful experience.
A huge thanks to CyanogenMod for the source and all the work and dedication their team puts in to keep us updated.
Bliss is CM13 based, with some features added in from various roms, and we will continue to update features as they become available.
We will keep up to date with the latest CM code, and updates will be posted on a regular basis.
However, please do not ask for ETA's. We will update the links as soon as they become available.
We will not tolerate any rudeness or anyone being disrespectful in this thread.
We will do our best to answer your questions or concerns as soon as possible.
Visit our website for features that include:
Member sign-up, staff information, all the latest rom downloads, the option to open support tickets for issues & more!
BlissRoms Website
Personalization Options
CM13 Theme Engine
Status Bar
Statusbar Clock & Date Options (Left/Center/Right/Hide/Etc)
Battery Icon Options
Customizable QS Tiles
Navigation & Button Options
Toast & Listview Animations
Recents Options
-Memory Bar
-OmniSwitch (Option to replace recents menu with Omniswitch)
Notification Drawer
-Status Bar Header (Weather)
-Tile Options
-Flashlight Option
-Custom Color Tile Options (Set Background, Icons & Text)
Heads Up Notifications
Lockscreen Options
-Long Press Lock Icon to Sleep
-Shortcuts
-Music Visualizer Options
-Power Button Lock Options
-Lock Method Options
Power Menu Options
-Power Off
-Reboot
Gesture Anywhere
-Location Options
-Trigger Regions
Animations
Slim Animations
App Circle Bar
-Included Apps
-Trigger width, position and height
Sound Options
-Link Ringtone & Notification Toggle
-Media, Alarm, Ring & Notification Sound Options
Display & Light Options
Brightness Level
Adaptive Brightness
LiveDisplay
Rotation
Ambient Display
Double Tap to Sleep
Sleep Time
Wake on Plug
Cast Screen
Wallpaper
Expanded Desktop
LCD Density
Daydream
Font Size
Show Search Bar in Recents
Notifications
Heads Up
Do Not Disturb & Access
Device Lock Options
App Notifications
Notification Access
Filter Notifications
More Stuff Included
Bliss Download Section
-All current downloads for your convenience
[/LIST
AudioFX Equalizer
-SuperSU - Huge thanks to @[COLOR="DeepSkyBlue"]Chainfire[/COLOR]
-Bliss Wallpapers (via launcher’s Wallpapers)
-Home Launcher Option
-CM Camera
-User Profiles
-System Profiles
-Location Options
-Security Options
-Privacy Options
-Accounts & Sync
-Language & Input
-Backup & Reset
-Date & Time
-Accessibility
-Printing
-Developer Options
-Rom & Hardware Information
-Changelog
-Bliss OTA Updates
--Many other settings throughout the rom. Take some time to familiarize yourself with all the blissful options!
Bliss Source
https://github.com/BlissRoms
BlissRoms Devices Source
https://github.com/BlissRoms
We recommend using any of the following sets of GApps:
TK Gapps
Open Gapps Project
Minimal Edition GApps
BlissRoms v6.2 - 6.0.1 OFFICIAL 16/04
Old versions :
BlissRoms v6.1 - 6.0.1 OFFICIAL 28/02
BlissRoms v6.1 - 6.0.1 OFFICIAL 10/02
BlissRoms v6.0 - 6.0.1 OFFICIAL 23/01
BlissRoms v6.0 - 6.0.1 OFFICIAL
BlissRoms v6.0 - 6.0.1 BETA
BlissRoms v6.0 - 6.0.1 Initial Release
Team Bliss is not responsible in any way for anything that happens to your device in the process of flashing.
Please familiarize yourself with flashing and custom rom use before attempting to flash the rom.
Please make sure you download the correct version of Bliss for your specific device. The links are labeled clearly.
*Make sure you are rooted.
*Make sure you have a custom recovery installed. (TWRP is the preferred recovery)
*Download the latest Bliss Rom & the latest GApps package.
*Boot into recovery.
*Perform a FULL factory wipe and wipe/system and dalvik cache as a precaution
*Flash Bliss Rom
*Flash Google Apps package (for 6.0!)
*First boot may take up to 10 minutes
- All CM Bugs
If you have a major bug to report that has not been reported already, and is not a known issue with CM,
please take the following steps to report it to us. It will save you time, as well as us.
-Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
-After downloading the Catlog app, go to the app settings, and change the log level to Debug.
-Clear all previous logs and take the exact steps to produce the error you are receiving.
-As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
-Copy and paste the entire log either to Hastebin or Pastebin
-Save the log, and copy and paste the link into the forum with a brief description of the error.
-You can also open trouble tickets on our website for bugs.
Team Bliss is a team consisting of developers and device maintainers that work on this project in our
spare time to be able to give Android users a custom rom packed with features that will make a lasting impression.
@[COLOR="DeepSkyBlue"]pimpmaneaton[/COLOR], @[COLOR="DeepSkyBlue"]jackeagle[/COLOR], @[COLOR="DeepSkyBlue"]nprev420[/COLOR], @[COLOR="DeepSkyBlue"]remicks[/COLOR], @[COLOR="DeepSkyBlue"]Deliberate[/COLOR], @[COLOR="DeepSkyBlue"]xboxfanj[/COLOR], @[COLOR="DeepSkyBlue"]skyliner33v[/COLOR], @[COLOR="Magenta"]nerdyblonde[/COLOR], @[COLOR="DeepSkyBlue"]pjgraber03[/COLOR], @[COLOR="DeepSkyBlue"]bracketslash[/COLOR],
@[COLOR="DeepSkyBlue"]Vortex1969[/COLOR], @[COLOR="DeepSkyBlue"]death2all110[/COLOR], @[COLOR="DeepSkyBlue"]electrikjesus[/COLOR], @[COLOR="DeepSkyBlue"]blueyes[/COLOR], @[COLOR="DeepSkyBlue"]asianflavor[/COLOR], @[COLOR="DeepSkyBlue"]Jiggs82[/COLOR], @[COLOR="DeepSkyBlue"]genesixxbf3[/COLOR],
@[COLOR="DeepSkyBlue"]nicholaschum[/COLOR], @[COLOR="DeepSkyBlue"]DARK_EYES_[/COLOR],
@[COLOR="DeepSkyBlue"]KeTuRr74[/COLOR] ,
@[COLOR="DeepSkyBlue"]Men_in_black007[/COLOR],
@[COLOR="DeepSkyBlue"]BitO BSessiOn[/COLOR]
Huge thanks to all members of Cyanogenmod for the source.
Also a huge thanks to Chainfire, DirtyUnicorns, NamelessRom, SlimRoms, EuphoriaOS,
CRDoid, OmniRom, Temasek, AICP & all the other developers who work hard to keep all the great features coming!
We really appreciate all your knowledge & hard work!
Thanks to @[COLOR="DeepSkyBlue"]skyliner33v[/COLOR] for making our wallpaper & optional boot animations, @[COLOR="DeepSkyBlue"]electrikjesus[/COLOR] for making the current boot animation as well as others,
@[COLOR="DeepSkyBlue"]pjgraber03[/COLOR] & @[COLOR="DeepSkyBlue"]electrikjesus[/COLOR] for developing and maintaining our website,
@[COLOR="DeepSkyBlue"]death2all110[/COLOR] for developing the Bliss Wallpapers app, and @[COLOR="DeepSkyBlue"]nicholaschum[/COLOR], @[COLOR="DeepSkyBlue"]genesixxbf3[/COLOR] and @[COLOR="DeepSkyBlue"]tobitege[/COLOR] for the OTA xml generator.
Thanks to @[COLOR="DeepSkyBlue"]Kryten2k35[/COLOR] for the original source of the OTA app.
We do NOT ask for or expect any donations from users.
If someone takes it upon themselves to donate to us, of course it will be appreciated,
and all funds will be used to pay our server fees.
If someone does choose to donate, our PayPal link is below.
PayPal Link
Very Important Information
Team Bliss will allow some minor off-topic comments in our development threads.
Please post in the general forums for off-topic comments and/or questions.
Overall, please keep comments relevant to development, as this better helps you and our team
when trying to determine problems that users are having.
We appreciate all levels of knowledge in our threads, and therefore we ask that
the seasoned members be helpful to those with less knowledge.
Most importantly, do NOT troll those with less knowledge than yourself.
Should you feel inclined to not abide by our request, the XDA Moderators may be called in to remove posts.
We thank you for adhering to our thread rules.
Thank you for using Bliss! We appreciate each and every one of our users!
XDA:DevDB Information
[OFFICIAL][6.0.1][v6.2][STABLE]BlissRoms , ROM for the Samsung Galaxy Note II
Contributors
KeTuRr74, nprev420
Source Code: https://github.com/BlissRoms-Devices/android_device_samsung_n7100
ROM OS Version: 6.0.x Marshmallow
Based On: CyanogenMod
Version Information
Status: Stable
Created 2015-06-17
Last Updated 2016-04-16
Changelog
====================
01-23-2016
====================
* cts/
c29efcd Merge "Fix monkey package test" into marshmallow-cts-release
9c9a98a Fix monkey package test
* packages/apps/Settings/
b08463c Merge "Settings: Add fingerprint authentication for protected apps." into mm6.0
bb3dd2c Merge "Settings: Actually expose protected apps settings." into mm6.0
e97d26a Settings: Add fingerprint authentication for protected apps.
3cb98ee Settings: Actually expose protected apps settings.
* prebuilts/cmsdk/
a538920 prebuilts/cmsdk: Update for API 4 maven central release.
* vendor/cmsdk/
19c2874 cmsdk: Update for new ll interfaces.
78a1bcb cmsdk: Fix hardware service interfaces.
d806c12 cmsdk: add invalid input checking for persistent storage APIs
d6fc4e7 ExtViews: Add action and meta-data
6989395 LiveLockScreen: Add setting for enabled/disabled
928f41f CMSettings: Introduce concept of protected apps managers.
3772151 cmsdk/tests: Fix zenmode tests.
77d5814 cmsdk: change persistent storage test cases to void return type
c2f76a1 Add overlay for SWAP_VOLUME_KEYS_ON_ROTATION
0e822f0 Change THIRD_PARTY_KEYGUARD permission to normal
====================
01-22-2016
====================
* external/exfat/
4a8592e exfat-fuse: Don't export UTF conversion functions
* external/f2fs-tools/
c876665 f2fs-utils: Fix Android host utils
* frameworks/base/
0a9c4f3 Add Screen Record to the Power Menu [1/2]
9537d11 fb: add back all keyboard IME features back (1/2)
084f274 FWB: Dotted circle battery (1/2)
aea982a FWB: Dotted circle battery (1/3)
9b9f821 Longpress power lockscreen torch [1/2]
* hardware/qcom/audio-caf/msm8960/
cb0a9ef alsa_sound: Fix handling of zero size write request
* hardware/qcom/fm/
6e7eaa7 libfm_jni: Improve and fix FM jni logs
* manifest/
c72066d Track our own cmsdk
105c6f8 Use our own ThemeChooser app
5394bc5 Track our own busybox before CM deletes it
* packages/apps/Settings/
5de3e3d bliss: Add new maintainers and cleanup xml files
e03686d Point InputMethodsSettings to Bliss
b0be0f4 Add Screen Record to the Power Menu [2/2]
6529b8922 settings: add back all keyboard IME features back (2/2) this commit adds:
53d8bf8 Settings: Dotted circle battery (2/3)
27cef88 Longpress power lockscreen torch [2/2]
* packages/apps/ThemeChooser/
9455f87 Remove themes icon from launcher
d90cc76 Create .gitreview
* system/extras/
c671736 fix bug in mkf2fs tool calculation of f2fs filesystem length
* vendor/cmsdk/
8bce054 Cmsdk: Dotted circle battery (3/3)
2645de1 Create .gitreview
====================
01-21-2016
====================
* bootable/recovery/
acfc034 sr: Add performance control
* external/mksh/
db58d5b add ll and la aliases to shell
* frameworks/base/
417cc25 SystemUI: Double tap to sleep on the lock screen (1/2)
* frameworks/opt/telephony/
8942ed5 Do not disable permanently enabled carrier apps
* hardware/samsung/
de5e3c6 Initial unified Samsung power HAL
* kernel/samsung/smdk4412/
6b99703 mali: 3-step gpu DVFS control for Exynos 4210
* packages/apps/Contacts/
5595731 Move to new BlockContactHelper.BlockOperation
* packages/apps/ContactsCommon/
60502a8 Refactor BlockContactHelper
* packages/apps/Dialer/
a1739cf Add back call stats feature.
* packages/apps/Email/
a29e6b2 Improve notification coalescence algorithm.
* packages/apps/Settings/
1840b83 Settings: Add Double Tap to Sleep Lockscreen credits @altaf-Mahdi
* packages/apps/Snap/
bb800ac Fix up layout of auto HDR notice and histogram view.
42f6d5c Remove unused menu indicators code.
4faa77d Avoid static member variable.
96b38fd Improve CameraControls layout code.
e1abba9 Fix transparent background color.
788ae64 SnapdragonCamera: Fix UI alignment glitches when nav-bar is enabled
5d94a49 Snap: Don't enable ZSL when disabling HDR
* packages/apps/Trebuchet/
f15a377 fix CTS failure on Trebuchet - manually picked from a269d518db02c8383e3621dff9d6054e3e9e48d6
* system/bt/
b2f946e btm: Fix compile with BLE disabled (again)
* vendor/samsung/
cd35e9a klte-common: Remove deprecated HEVC proprietary file
58c6780 klte-common: Regenerate makefile
====================
01-20-2016
====================
* device/qcom/sepolicy/
017145b sepolicy: fix mm-qcamerad permission for persist.camera* properties
* external/f2fs-tools/
8b00f01 Slight ifndef change
35570b5 Fix readonly for android
ad0f267 fsck.f2fs: return 0 for no error was reported
bf2ada1 fsck.f2fs: assign checkpoint pointer correctly
964adc0 fsck.f2fs: swap checkpoint crc to CPU endian
bf12354 f2fs-tools: avoid failure and warnings for android build
54dabbe mkfs.f2fs: introduce zone align for main area
b5476e1 fsck.f2fs: fix double free invalid checkpoint
75ecd2f man: modify mkfs.f2fs man page
a896342 man: add missing man pages
611f285 Update android version
a901a43 f2fs-tools: release 1.6.0
9a521a8 mkfs.f2fs: fix check error when calloc sum_compact failure
32dd5f4 fsck.f2fs: fix losing journal entries
0516d2b defrag.f2fs: fix missing SSA updates
f00f43e defrag.f2fs: enhance allocation speed
030ee52 libf2fs: fix incorrect type define of declaration
09dfa9f defrag.f2fs: return error if there is no space
8c04142 defrag.f2fs: eliminate unexpected journal entries
9b8535c defrag.f2fs: fix not to allocate current segment
837208e lib: use u8/u32/u64 for bit operations
b54e4b5 lib: fix test_bit_le functions
7d95d38 mkfs.f2fs: remove extent_cache entry for parent directory
cd610cd mkfs.f2fs: fix storing volume label correctly in utf16
d174269 fsck.f2fs: deal with realloc size and realloc failure
a144fc1 Revert "fsck.f2fs: deal with realloc failure"
729ecdf mkfs.f2fs: fix to calculate left space of checkpoint page correctly
fd4f8d3 Android add f2fs defrag
c18df71 defrag.f2fs: introduce defragmentation tool
d19dbfc fsck.f2fs: LFS alloc_type must have free segment after blkoff
4358121 f2fs-tools: export print_raw_sb_info
2267b80 mkfs.f2fs: export get_best_overprovision
17e0cb6 fsck.f2fs: sanity_check for extent_cache entry
3de0318 libf2fs: enhance the bit operations
4cf9c57 f2fs-tools: add library version info
7e76ee5 mkfs/Makefile.am: add a section to build libf2fs_fmt
8c1bb17 mkfs.f2fs: show correct partition size
f78e245 fsck.f2fs: use get_{sb|cp} and set_{sb|cp} macros
ea1e148 mkfs.f2fs: export get_{sb|cp} and set_{sb|cp}
3b01e52 mkfs.f2fs: discard obsolete blocks to avoid roll-forward recovery
ee06528 mkfs.f2fs: skip extension name that is too long
5da4595 mkfs.f2fs: avoid dumplicate extensions
e89637e fsck.f2fs: deal with realloc failure
04d6106 fsck.f2fs: support a readonly filesystem
f9c29e7 fsck.f2fs: declare static function
* external/stagefright-plugins/
24988a8 stagefright-plugins: Update pixfmt
* frameworks/av/
a9d5e23 nuplayer: looping playback only if it was running
4758540 ACodec: update native window crop rectangle
3bf6288 StagefrightMetadataRetriever: correct the status flag
68e328a AudioMixer: delete reformatBuffer provider in proper order
a273210 libstagefright:Fix random memcmp crash while accessing output format.
ed17c85 audio: Update anchor time for offload playback post resume
* frameworks/base/
b0aa380 SystemUI: fix tiles per page when changing top tile type
236cc95 SystemUI: fix disappearing tiles
f9eec8c SystemUI: fix viewpager page recycling
2cf0f5a pm: Add persist property to enable lazy dexopt
30c42a4 SystemUI: fix qs tile page regressions
d31655b Keyguard: set separator for multi-sim CarrierText
8cc0ddd SystemUI: add a disabled state for Quick Tiles
a7b05e4 Improve Recents-View
83e9c20 SystemUI: Fix copy-pasta of battery saver tile
a555f20 Reorder location tile and always show on lockscreen
0b73f62 Do not start music app when headset is unplugged
* frameworks/opt/telephony/
5a1d942 Fix wrong args when calls OperatorInfo
* hardware/qcom/keymaster/
68fe4a7 Disable ION_HEAP_MASK_COMPATIBILITY_WA on Sony 3.10 Kernel
* packages/apps/Contacts/
2089467 Contacts : remove unused CONTACT_URI_EXTRA
201c1ff Contacts : enable cleartext traffic
* packages/apps/ContactsCommon/
d6302ae Add lookupkey for Contact in ContactBuilder
* packages/apps/Settings/
327d7c6 Fix up increasing ring tone volume preview behaviour.
3173461 Fix some duplicate settings
* vendor/cmsdk/
80001bf cmsdk: Fix BuildTests. Bump parcelable version.
====================
01-19-2016
====================
* build/
a5c7577 use arm64 kernel toolchain if arm64
* cts/
3189f36 merge in marshmallow-cts-release history after reset to marshmallow-cts-dev
d3c154f Merge "DO NOT MEGE ANYWHERE: BUMP CTS 5.1 to R5" into lollipop-mr1-cts-dev am: c0c1c9e832 -s ours
c0c1c9e Merge "DO NOT MEGE ANYWHERE: BUMP CTS 5.1 to R5" into lollipop-mr1-cts-dev
c717d7e DO NOT MEGE ANYWHERE: BUMP CTS 5.1 to R5
f3db83f Merge "DO NOT MERGE: BUMP CTS 6.0 to R3" into marshmallow-cts-dev
989dcfb DO NOT MERGE: BUMP CTS 6.0 to R3
* device/qcom/sepolicy/
fcabab0 Merge branch 'LA.BF.1.1.3_rb1.8' of git://codeaurora.org/device/qcom/sepolicy into cm-13.0
* external/stagefright-plugins/
6de1c90 stagefright-plugins: Skip stream with jpeg tag
* external/uicommon/
7d9ebd3 Fix merge derp
* frameworks/base/
3a39b8c Update Lockscreen clock font option [1/2]
a1c3498 FWB: LS clock fonts: Add more fonts (1/2)
a498f56 Merge "Themes: Expose volume slider and thumb colors and make them work with custom images." into mm6.0
93019f1 Merge "SystemUI: add some tile removal hints" into mm6.0
4dd0c09 Merge "SystemUI: fix lock screen tile state refresh" into mm6.0
e91b150 Merge "SystemUI: handle custom tile long press PendingIntents" into mm6.0
c067dcf Merge "SystemUI: improve qs tile layout mechanism" into mm6.0
e52f675 Merge "SystemUI: add a disabled state for Quick Tiles" into mm6.0
71b5e1c Merge "Lockscreen Clock Widget Fonts [1/2]" into mm6.0
fab3aed Themes: Expose volume slider and thumb colors and make them work with custom images.
c18d141 SystemUI: add some tile removal hints
41164be SystemUI: fix lock screen tile state refresh
effbfb6 SystemUI: handle custom tile long press PendingIntents
32207ec SystemUI: improve qs tile layout mechanism
dee6038 SystemUI: add a disabled state for Quick Tiles
13a430f Add enabled pre-installed carrier apps
* frameworks/opt/telephony/
07591f8 telephony: Make sure to check whether application info is null.
62bcb10 telephony: update tests for disableCarrierAppsUntilPrivileged API change
ee0fc82 Add support for permanently enabled carrier apps
* hardware/qcom/display-caf/msm8974/
f4051ae hwc: Reset ROI and avoid dirtyRect for video case
* kernel/samsung/smdk4412/
daa49a6 IsoRec: Isolated Recovery for the Exynos 4210 family
* packages/apps/Bluetooth/
b9f0d69 Merge branch 'LA.BF.1.1.3_rb1.8' of git://codeaurora.org/platform/packages/apps/Bluetooth into cm-13.0
* packages/apps/Browser/
250ebb8 Themes: Expose hard coded colors and styles from layouts
* packages/apps/DeskClock/
9d09dad Allow theming numpad
* packages/apps/Settings/
f5ce315 Update Lockscreen clock font option [2/2]
6727791 LS clock fonts: Add more fonts (1/2)
52f9c10 Lockscreen Clock Widget Fonts [2/2]
* packages/apps/Snap/
4a42fc4 Snap: Add missing ISO350 to ISO arrays
08ba343 Snap: Set some more qcom features as untranslatable
98ebf87 SnapdragonCamera: Remove 'off' option for antibanding
48408c9 SnapdragonCamera: Fix overly-aggressive auto rotation
6411b0a SnapdragonCamera: Clarify antibanding settings
b5de271 SnapdragonCamera: Add option to control antibanding in camcorder
* packages/apps/SoundRecorder/
77e037c soundrecorder: Put the menu back
* packages/apps/Trebuchet/
3961290 Themes: Expose hard coded colors from layouts
* system/bt/
d4cd181 Merge branch 'LA.BF.1.1.3_rb1.8' of git://codeaurora.org/platform/system/bt into cm-13.0
* vendor/bliss/
c85b0df vendor/cm: Bump cmsdk platform version.
929d3e4 Fixed mmm For Maven APK
* vendor/cmsdk/
735333c cmsdk: Add new version code to the sdkmap.
24f2bb4 cmsdk: Introduce Elderberry, api level 5.
ebf0f55 cmsdk: Finalize DragonFruit (api level 4).
====================
01-17-2016
====================
* packages/apps/Settings/
bd40853 Add nexus 5x maintainer
====================
01-16-2016
====================
* build/
6e4d0e7 Revert "Conditionally create symlink /system/vendor if needed"
* device/samsung/smdk4412-common/
27db785 Fix crash when switching between cameras
* packages/apps/LockClock/
ff1cf25 LockClock : Update to v23 + runtime permissions
* packages/apps/Snap/
44cfc31 Don't needlessly make menu button larger than the other toggle buttons.
* packages/apps/Trebuchet/
ab66f21 Trebuchet: Fix NPE when app search controller is off
* system/vold/
78f24b1 vold ext4/f2fs: do not use dirsync if we're mounting adopted storage
* vendor/cmsdk/
cf3f38c cmsdk: Add CYANOGENMOD_VERSION constant.
====================
01-15-2016
====================
* build/
3513e54 Merge "Attempt at fixing SuperSU 2.66" into mm6.0
a784acb Attempt at fixing SuperSU 2.66
* device/samsung/i9300/
dc84302 Update i9300.mk
e782ea6 Rename cm.mk to bliss.mk
381d3be Update cm.mk
5694d53 Delete cm.dependencies
* frameworks/base/
0ef9341 Merge "Lockscreen colors [1/2]" into mm6.0
44e9286 Merge changes I6b7a3986,I4493441d,I3734d862,Idc5e5535,Ie8d4109f, ... into mm6.0
f448b7e Lockscreen colors [1/2]
77aeec6 MediaScanner behavior on boot (1/3)
8c57fa4 SysUI: Use Objects.equals() for comparing components
856fc53 SysUI: Fix notification panel alignment after theme change
7bb9980 policy: disable EdgeGestureService
667967e allow GET_ACCOUNTS_PRIVELEGED to be whitelisted
dce536b AdbOverNetworkTile: only de/reregister the observer when setListening changes whether we should be listening
3eea058 SysUI: Reuse controllers and managers
* frameworks/opt/telephony/
6d6213a telephony: Fix persistence of automatic network selection
* hardware/qcom/media-caf/msm8994/
79e831d Fix flooding of message in calcLumaAlign
* manifest/
0fb870e Use 3 more of our own intel repos (psb_headers, omx-components, libva)
ff99c71 manifest: move mips prebuilts into notdefault
8d89bc3 Add QC dataservices by default
6a44ed2 cm: Remove qcom/opensource/display-frameworks
0b47269 Sorry BusyBox, you've been disrupted.
* packages/apps/ContactsCommon/
b88149f Add required permission to read vcf from gmail
f1501f5 Ensure non-null encoded uri before attempting to parse
* packages/apps/Settings/
0f819a7 LockScreen Colors 2/2
81ec9af Settings: MediaScanner behavior on boot (2/3)
* packages/apps/Snap/
3b96d32 Snap: Set some qcom features as untranslatable
d8420e3 Drop new focus indicator into Camera2.
db27186 Snap: Actually select the highest quality video by default
2233950 CameraActivity: Don't hide navigation bar
* packages/providers/MediaProvider/
fb2d7ad MediaProvider: MediaScanner behavior on boot (2/3)
* packages/providers/ThemesProvider/
59bff5c No default lock wallpaper and live lock screen for system theme
* packages/wallpapers/PhotoPhase/
6a4f804 PhotoPhase: ask for runtime permissions
* system/vold/
6ab045a vold: hw_fde: Fix merge damage
* vendor/cmsdk/
969cda0 cmsdk/tests: Temp hack to fix `mka` builds.
====================
01-14-2016
====================
* external/chromium-webview/
0867533 Update prebuilt webview
* external/libpng/
75a4e74 libpng: fix hang during read when inflate fails
* frameworks/base/
02e1382 AudioService: launch default music player on headset connect [2/2]
8e46e3e Hide power menu on lockscreen [1/2]
753eb6b Keyguard: Fix Derp
09a56b9 Disable PIN entry after successful quick unlock
c6a25c3 Keyguard: Forward port lockscreen quick unlock (1/2)
c145452 Merge "FEB: Disable/Enable screenshot sound [1/2]" into mm6.0
a03c36f FEB: Disable/Enable screenshot sound [1/2]
ce2b61a Merge "SystemUI: write keyguard enabled setting to CMSettings" into mm6.0
dd7cb09 Merge "SystemUI: Make lockscreen visualizer battery friendly" into mm6.0
c36a816 Merge "SysUI: Re-add status icons in recreateStatusBar()" into mm6.0
09b150c SystemUI: write keyguard enabled setting to CMSettings
95e033d SystemUI: Make lockscreen visualizer battery friendly
99b505f SysUI: Re-add status icons in recreateStatusBar()
3899242 Show 4G intead of LTE switch
0b8e151 Frameworks: add ability to disable bar color in battery saver mode (1/2)
d214a21 Add option to hide Bluetooth Icon when disconnected in Status Bar (1/2)
* hardware/intel/common/libva/
92286f2 intel: av: Remove attrib_ptr for zenfone2 blobs
02ad2b8 intel: av: Update slice header group def to support zenfone2 blobs
* hardware/intel/common/omx-components/
43ccd58 intel: omx: Unbreak SetConfigVideoBitrate
1338ce0 intel: omx: Zenfone2 blobs cannot handle metadata mode
eef0672 intel: omx: LP blob compatibility
* hardware/intel/img/hwcomposer/
a1ae079 Merge "HWC: adapt VirtualDevice for old blob compliance" into cm-13.0
fed56bf Merge "Hwcomposer: Enable VirtualDisplay feature" into cm-13.0
* hardware/intel/img/psb_headers/
21817aa intel: mixvbp: LP blob compatibility
* hardware/qcom/audio-caf/msm8916/
1c5250f audio HAL: fix thread starvation
793548e audiopolicy: use deep buffer output by default for music streams
* packages/apps/CarrierConfig/
7b25cb4 Set voicemail's notification persistent for O2 UK
* packages/apps/Settings/
82d7eca Settings: launch default music player on headset connect [1/2]
cdad398 Keyguard: Forward port lockscreen quick unlock (2/2)
c41b0dc Hide power menu on lockscreen [2/2]
1bb5cc9 Merge "MiscSettings: Disable/Enable screenshot sound [2/2]" into mm6.0
ee6c593 Merge "Settings: show warning in lock screen settings when disabled by qs" into mm6.0
42ab8bb Settings: show warning in lock screen settings when disabled by qs
68a6024 Show 4G intead of LTE switch
eb5e2d2 Settings: add ability to disable bar color in battery saver mode (2/2)
1531f76 Add option to hide Bluetooth Icon when disconnected in Status Bar (2/2)
* packages/apps/Snap/
607a2f0 SnapdragonCamera: limit video file size on SD card
f0e709d SnapdragonCamera: Hide all camera setting when countdown timer starts
24081ba SnapdragonCamera: Set color effect as none when turn HDR on
645970f SnapdragonCamera: Fixing NullPointerException in onCreate of VideoModule
8a0414d SnapdragonCamera: fix thumbnail display
ff10b54 SnapdragonCamera: fix crash taking Macro+ from MMS
8eeafc1 SnapdragonCamera: fix NumberFormatException when input value invalide
cd14209 Snap: Remove touch AF/AEC option
4b6ac95 Snap: Support 1:1 aspect ratio
* packages/apps/Trebuchet/
fb312de Trebuchet: Remove app search controller if turned off
5b04456 Trebuchet: Fix some monkey test race condition bugs
* system/vold/
ba3b7bd cryptfs: Set HW FDE flags when building libvold
* vendor/bliss/
3b0f149 APN: Remove wrong T-Mobile CZ and Vodafone CZ APNs
5a67302 fix cricket APN
e741f4f Update KernelAdiutor and SuperSU 2.66
* vendor/cmsdk/
b9f80b6 cmsdk: Load notification led customization defaults
====================
01-13-2016
====================
* device/samsung/smdk4412-common/
1cd1768 smdk4412: kill low latency audio
* frameworks/av/
3a662df av: Add support for loading audio_effects_vendor.conf
* frameworks/base/
0e61844 FWB: Add Volume Key Answer (1/2)
b3c8775 Powermenu screenshot delay [1/2]
c48f07b FWB: Make all 18 font variants available to Statusbar weather temp (1/2)
54a934d FWB: Make all 18 font variants available to Statusbar Clock (1/2)
5fa0f83 SystemUI: Fix CallbackHandler and NetworkControllerBase tests.
ff9e9e0 SysUI: Disable window animation when using KeyguardExternalView
0e31495 SysUI: Handle KgdExtView callbacks on UI thread
c7f9de1 SystemUI: Removing padding on mobile signal group.
e279051 Ringtone: Add support for selection of phone ringtone for SIM-2.
61b360a SettingsProvider: Disable data roaming by default
7639b62 SystemUi: Reintroduce always_show_roaming config.
d9d7bc9 ThemeService: ManagedProvisioning is a setup package too.
3899507 SystemUi: Nuke DONT_TRACK label, and introduce CMMetricsLogger constants.
* frameworks/support/
6f0a2cb Make sure that AppBarLayout is laid out correctly
2ae0ed1 AppBarLayout layout/measure fixes
* hardware/intel/common/libmix/
347c889 intel: videoencoder: Kill logspam when casting a screen
fea1c72 intel: videodecoder: Remove attrib_ptr for zenfone2 blobs
eaa09ab intel: videodecoder: mpeg4: Remove got_vol/got_vop for zenfone2
543245f intel: videodecoder: AVC: Remove "constraint_set5_flag" for zenfone2
e01cfdd intel: libmix: Use ASUS_ZENFONE2_LP_BLOBS instead
* hardware/intel/common/libwsbm/
b2fc92b intel: libwsbm: Use ASUS_ZENFONE2_LP_BLOBS instead
* hardware/intel/img/hwcomposer/
8b7b71a intel: hwcomposer: csc mode is only supported on newer blobs
a2bc976 intel: hwcomposer: Use ASUS_ZENFONE2_LP_BLOBS instead
* hardware/intel/img/psb_video/
a1c9ae0 intel: psb_video: LP blob compatibility
28f732b intel: psb_video: Use ASUS_ZENFONE2_LP_BLOBS instead
* hardware/qcom/audio-caf/msm8916/
86d47ef hal: Support the msm8939-florida-snd-card.
* hardware/ti/omap4/
9ce3921 add CMHW for ColorCalibration/LiveDisplay
* manifest/
7fe90fa Track our own Media Provider
1754421 Revert "Added in vendor blobs for manufactures we support"
* packages/apps/CMFileManager/
26fd0d7 Bump target SDK version to 23
* packages/apps/Contacts/
a08be42 Add contact blocking and unblocking
* packages/apps/ContactsCommon/
cf86693 Add block contact dialog and supporting helper classes
bbf7e82 Refactor contact info lookup
* packages/apps/Email/
34fb128 email: junk icon
c929853 email: return default folder name for subfolders
* packages/apps/Messaging/
7fc9cfe Adhere to the revised lookup provider api
* packages/apps/OmniSwitch/
2ca972f OmniSwitch: add translations by @ShevT and @Fast0n
* packages/apps/Settings/
679ae3f Settings: Add Volume Key Answer (2/2)
fdf7eb8 Powermenu screenshot delay [2/2]
bcf52eb MiscSettings: Disable/Enable screenshot sound [2/2]
7c5501b Settings: Make all 18 font variants available to Statusbar weather temp (2/2)
7f24822 Settings: Make all 18 font variants available to Statusbar Clock (2/2)
a0f1839 Merge "Settings: Set regulatory information dialog to non-translatable." into mm6.0
b1389c3 Merge "Settings: Show ringtone per sim for multi sim device" into mm6.0
06e4f97 Merge "Squash commit of SAR and IC Code." into mm6.0
9191c4b Merge "Settings: Add CMMetricsLogger constants to proper pages." into mm6.0
102f260 Merge "Create specific menu for battery" into mm6.0
6e18568 Merge "Create menu for network traffic and blissify a few things" into mm6.0
2a34e0f Added G3 & NVIDIA Shield Tab Maintainers
1c14f53 Settings: Set regulatory information dialog to non-translatable.
dee0855 Settings: Show ringtone per sim for multi sim device
26eeffd Squash commit of SAR and IC Code.
efb3c05 Settings: Add CMMetricsLogger constants to proper pages.
6a80785 Create specific menu for battery
3a77786 Create menu for network traffic and blissify a few things
* packages/apps/Snap/
0ad4095 Snap: Support for HTC's HDR mode
* packages/apps/UnifiedEmail/
032f3a2 Remove mail signatures from notification text.
7a5f09b unifiedemail: junk icon
b50cac5 email: allow move/copy operations to more system folders
* packages/providers/MediaProvider/
4f7971d Create .gitreview
* packages/providers/TelephonyProvider/
37604de TelephonyProvider: Handle database migration from cm-11.0.
* system/media/
c969dad effects: Add AUDIO_EFFECT_VENDOR_CONFIG_FILE2
* vendor/bliss/
618fafc Merge "sepolicy: Add perfprofd with set_prop macro" into mm6.0
c3ea623 sepolicy: Add perfprofd with set_prop macro
* vendor/cmsdk/
bf9cc6d cmsdk: add lockscreen internal enabled setting
====================
01-12-2016
====================
* build/
6b11083 qcom: Fix non-QC target pathmappings
2e0c492 qcom: Add dataservices to * pathmap
* frameworks/av/
c4ec187 Fix cameraservice mismerge
1a936a0 Forward Port: Add Camera sound toggle [3/3]
2d1074a Update .gitreview
c83dd3e Create .gitreview
ddf0593 libstagefright: Support YVU420SemiPlanar camera format
* frameworks/base/
0e1eccc Base: Add OmniSwitch as option for default recents [1/2]
f8e0988 Forward Port: Add Camera sound toggle [1/3]
658ed08 Disable Lockscreen Media Art [1/2]
3e86473 Merge changes I32520af0,Ifbb02c92,I48991811,Ic0151857 into mm6.0
30bd560 Merge "Status bar clock: Add BOLD ITALIC to font style (1/2)" into mm6.0
1d88bda Merge "Statusbar clock font style (1/2) PS1: Initial PS2: Int settings" into mm6.0
c990eaa Merge "Make WIFI_IDLE_MS default into an overlay" into mm6.0
ebd4dd4 Make WIFI_IDLE_MS default into an overlay
4d13dd4 Align checkbox and description in permission confirmation dialog
26c0036 Optimize GPS property reloading.
ed366d3 Increase brightness faster if ambient light is brightening quickly.
1565cfa Fix drawing of VectorDrawables that are rotated by 90 or 270 degrees.
e0a582f Automatic translation import
230c107 Make WIFI_IDLE_MS default into an overlay
053ca4b SystemUI: Fix status bar clock color disappearing
1577cc5 SystemUI: Remove mclockview
4babc41 Status bar clock: Add BOLD ITALIC to font style (1/2)
a4afd9f FWB: Statusbar clock font size (1/2)
e530ba2 FWB: Make all 14 font variants available to Statusbar Clock (1/2)
b89f8f7 Statusbar clock font style (1/2) PS1: Initial PS2: Int settings
* frameworks/opt/net/wifi/
53cbe97 Use def_wifi_idle_ms to fetch WIFI_IDLE_MS defaults
* hardware/qcom/display-caf/apq8084/
fc41c61 hwc: Fix compile errors after display-frameworks removal
* hardware/qcom/display-caf/msm8974/
8c9082a gralloc: allow forcing old pixel alignment
* manifest/
7fe457d Added in vendor blobs for manufactures we support
cb4ace7 Merge "Revert "Might as well pull av from cm for now"" into mm6.0
d650bec Revert "Might as well pull av from cm for now"
600b0e5 Add SnapDragon Camera for devices that can use it.
* packages/apps/CMFileManager/
9efd883 Automatic translation import
* packages/apps/Contacts/
019f467 Automatic translation import
64a9c32 Fix "Copy to .. " overflow menu item title
* packages/apps/Settings/
e4177c1 Fixes for Omni Swtich default recents
ab7d792 Settings: Add OmniSwitch as option for default recents [2/2]
f410cb3 Add recents menu and move some settings into it
7aaffc6 Fix for camera sound
4c9ea2b Disable Lockscreen Media Art [2/2]
7d6714a Forward Port: Add Camera sound toggle [2/3]
34db921 Merge changes from topic 'reset' into mm6.0
14e397f Merge "Settings: Make all 14 font variants available to Statusbar Clock (2/2)" into mm6.0
31dd9ed Merge "Statusbar clock font style (2/2)" into mm6.0
50acdaf Merge "Settings: add back status bar color option (2/2)" into mm6.0
e44a8b5 Automatic translation import
40cd3a1 Lower minimum vertical range for data usage.
4875100 Update vertical axis bounds when resetting network policy.
0ca4d31 Revert "Hide usage graph on app usage details pages."
45b36db Some text are missing in eject sdcard warning
3d00d3d Settings: Set default value for 'Volume keys control ringer stream'
69fff23 Settings: request runtime permissions inside VoiceWakeup
ae0cc4b Settings: increase default regulatory info drawable dimensions
83664c6 Settings: EL AOSP translation fixes
f5d2b3f Status bar clock font size: Don't use same key as display font size
dcc1057 Settings: Make all 14 font variants available to Statusbar Clock (2/2)
ba7e1d6 Statusbar clock font style (2/2)
4b2d95a Settings: enable reset option to status bar clock color
9db8ef8 Settings: Statusbar clock font size (2/2)
1f2d0be Settings: add back status bar color option (2/2)
* packages/apps/Snap/
7f73524 Snap: support more resolutions
8461f25 Snap: remove captureUI pngdrawables
358ebe9 Snap: Add more resolutions
* packages/apps/Trebuchet/
4eaa0a5 Trebuchet: Fix resource not found exception when picking a wallpaper
b0c1a0d Automatic translation import
* packages/providers/ThemesProvider/
3b82b9c Queries live lock screen preview path
* packages/services/Telephony/
044982b Automatic translation import
* vendor/bliss/
14105d7 init: Create directories needed by sshd
* vendor/cmsdk/
c7e69de cmsdk: Introduce internal MetricsLogger class.
* vendor/samsung/
c86d290 Merge pull request #714 from solk2/cm-13.0
974c01d ks01lte: Update blobs for M
Reserved 2
New ROM
Wow... new rom... and yeah... 1st....
---------- Post added at 08:21 PM ---------- Previous post was at 08:20 PM ----------
Will try soon...
Welcome to Note 2 !!! @KeTuRr74
Its nice to see BlissPop here
I hope it will be a blissful experience for everyone here.
I also request everyone here to contribute with various logs to stabilize the ROM on Note 2. You can use Syslog app from Play Store. Thanks :good:
Thanks Team Bliss and @RubbaBand (he was the first to bring a port) too :good:
santro2511 said:
Wow... new rom... and yeah... 1st....
---------- Post added at 08:21 PM ---------- Previous post was at 08:20 PM ----------
Will try soon...
Click to expand...
Click to collapse
If there are big problems,take a logcat and send it to me, will be needed to past from unstable to stable.
Nice I had install blisspop at my wife's i9100, superb. I'll w8 for stable version or beta. Thanks
Sent from my GT-N7100
Amvient display is present?
Inviato dal mio GT-N7100 utilizzando Tapatalk
4kki94 said:
Amvient display is present?
Inviato dal mio GT-N7100 utilizzando Tapatalk
Click to expand...
Click to collapse
Yes.
KeTuRr74 said:
Yes.
Click to expand...
Click to collapse
Add it in OP..is a fantastic feature...now flash and reports bug if there are
Inviato dal mio GT-N7100 utilizzando Tapatalk
4kki94 said:
Add it in OP..is a fantastic feature...now flash and reports bug if there are
Inviato dal mio GT-N7100 utilizzando Tapatalk
Click to expand...
Click to collapse
Added
KeTuRr74 said:
Added
Click to expand...
Click to collapse
I have flash it now...random FC of keyboard...ambient display not work properly..random FC of system UI of first boot but after not ...video of gallery work
Inviato dal mio GT-N7100 utilizzando Tapatalk
4kki94 said:
I have flash it now...random FC of keyboard...ambient display not work properly..random FC of system UI of first boot but after not ...video of gallery work
Inviato dal mio GT-N7100 utilizzando Tapatalk
Click to expand...
Click to collapse
Can you give me logcat to fix those issue ?
You have a Tutorial on the OP if you don't know how to do
KeTuRr74 said:
Can you give me logcat to fix those issue ?
You have a Tutorial on the OP if you don't know how to do
Click to expand...
Click to collapse
Lol sorry...i have restore my previous backup of curenaica 3.1 ...but Fc in cm is normal....only major bug is ambient display ....i have try yo active and deactive but when receive notifica screen dont wake Up....only led
Inviato dal mio iPad utilizzando Tapatalk
KeTuRr74 said:
Reserved 1
Click to expand...
Click to collapse
Good Job Brother ( Best Of Luck ) :good:
Tnx will try soon
& if any bug will provide a logcat..
KeTuRr74, I build the t0lte (another version of the note 2) and have been having issues with bootloop/black screen after optimizing apps after flashing new builds. Finally fixed it, this may help with any issues you are having. You need to replace frameworks/av AND frameworks/native with ArchiDroids.
Just add these lines to your local manifest http://pastebin.com/LRdXX0iV
Now these 2 repos are only good for exynos devices. If you build for any krait based devices you must switch back to our repos.
@KeTuRr74
Just to confirm,
is this ROM having call recording?
if no any plans to hav it in this ROM?
rohan164 said:
@KeTuRr74
Just to confirm,
is this ROM having call recording?
if no any plans to hav it in this ROM?
Click to expand...
Click to collapse
Yes includes call recording, and it works well !!
Hi Dev. @KeTuRr74
Now works done so far everything is fine .. :good:
CM errors only known so far!
Screencast works and fast LG smart TV, Proximity sensor calling OK, embedded video OK, Camera OK, Wifi-3G, etc OK .. in short all :good:
One thing is confusing. Randomly I find myself in the lock screen.
Good work, thanks... I'll stay a while in this ROM!
(I say that it is not unstable) :laugh:
Edited:
Only one request, I hope you do not mind:
System Can not Be animation effects added to the random chance? It would be very good
szunyi77 said:
Yes includes call recording, and it works well !!
Hi Dev. @KeTuRr74
Now works done so far everything is fine .. :good:
CM errors only known so far!
Screencast works and fast LG smart TV, Proximity sensor calling OK, embedded video OK, Camera OK, Wifi-3G, etc OK .. in short all :good:
One thing is confusing. Randomly I find myself in the lock screen.
Good work, thanks... I'll stay a while in this ROM!
(I say that it is not unstable) :laugh:
Edited:
Only one request, I hope you do not mind:
System Can not Be animation effects added to the random chance? It would be very good
Click to expand...
Click to collapse
@szunyi77
CALL RECORDING IS AUTOMATIC?
CM isn't building CM12.1 anymore for the M9 since CM13 made it to the nightlies. Still, many patches continue to go into CM12.1 branch. I'll try to continue building it, so all of you that rather stay on CM12.1 for a little longer can also benefit from those latest patches.
I'm not taking any credit in the rom itself, I'm just building it. It's PURE CM12.1, no GApps, no mod added, nothing modified or removed.
Download: See latest comments in this thread (include download link, mirror and changelog) or suscribe to this Pushbullet channel
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://www.pushbullet.com/channel?tag=adlx-himaul-cm12-1
Suscribe to the channel to receive notifications on your phone or smartwatch as soon as a new build is out!
Builds will be released from time to time, hopefully every day (as long as they are new commits in cm12.1)
Source:
CyanogenMOD https://github.com/CyanogenMod
HTC One M9 kernel https://github.com/CyanogenMod/android_kernel_htc_msm8994/tree/cm-12.1
Latest merged patches in branch cm-12.1: http://review.cyanogenmod.org/#/q/status:merged+branch:cm-12.1,n,z
Credits:
CM Team and all their contributors, especially @varun.chitre15
First build I made was:
cm-12.1-20160315-UNOFFICIAL-himaul.zip (md5: de4994a6a11937521ace2ee02f45bcb1)
Here's the changelog since 12/04/2015, which I believe was the last Official CM12.1
Changelog (part 1 of 2):
(I removed the Automatic Translations commits to make it shorter)
Project android
0749a80 default.xml: android-5.1.1_r34 -> android-5.1.1_r35
e999c31 Deprecate CMAccount
54803b7 default.xml: Update AOSP tag to android-5.1.1_r34
b518a5c manifest: Remove whispersystems (EOL Feb 1)
f4e3856 Use clone-depth="1" for all pre-built projects.
987f1ed default.xml: Update AOSP tag to android-5.1.1_r33
Project build
0e60de2 build: force .config update if additional kernel config changes
e6f8b55 kernel: Fix usage of KERNEL_ARCH
937d315 mms: introduce a shortcut to quickly rebuild kernel/boot.img
9d72f25 kernel: prevent targets from being rebuilt needlessly
e2f515a kernel: don't build modules or dtbs unless enabled
fa1323c "LMY49H"
fafe789 Updating security patch string to 2016-03-01
45182dc LMY49G
11a5628 "LMB78"
98e29ea "LMY49F"
d9a7c8e "LMB78"
9492d27 "LMY49E"
f28a559 "LMY49D"
5c8bd52 DO NOT MERGE - Update security string to 2016-02-01
5bb2f1a Update security string to 2015-12-01 - DO NOT MERGE
Project cts
0044895 DO NOT MERGE security: Test OOB arbitrary write at AMessage::FromParcel
Project development
5b7533d idegen: don't use hardcoded out directory
Project device/htc/hima-common
0d5a302 hima: Rename Broadcom HCD file
Project device/oppo/msm8974-common
a253ba8 msm8974: Allow flashing with newer TrustZone version
4821411 lights: fix battery light not turning off
92cbadb lights: Cleanup the code
Project external/bluetooth/bluedroid
412741c bnep_utils: remove correct duplicate else statement
b42291d bnep_utils: remove duplicate else statement
575cb99 [PATCH] DO NOT MERGE - Add proper checks for PAN & BNEP in BD stack
Project external/conscrypt
e653c2d Prevent duplicate certificates in TrustedCertificateIndex
e2db202 Cache intermediate CA separately
Project external/ffmpeg
7436342 Add MODULE_LICENSE and NOTICE files
Project external/iproute2
b1ad646 Add MODULE_LICENSE and NOTICE files
Project external/iptables
a83a9a0 Add MODULE_LICENSE and NOTICE files
Project external/koush/ion
4204efc Ion: Add .flv file type
Project external/libhevc
e4ec892 Fix the frame size alignments
9dc6202 Fix the frame size alignments
Project external/libpng
f3e5faa libpng: fix hang during read when inflate fails
Project external/libvpx
5a9753f Merge Conflict Fix CL to lmp-mr1-release for ag/849478
Project external/skia
635c2b9 [PATCH] Purge non-NEON ARM code. DO NOT MERGE
Project frameworks/av
c841410 [PATCH 6/6] GenericSource: reset mDecryptHandle when mDataSource is cleared.
6ad0c98 Merge Conflict Addressed.
5a67887 DO NOT MERGE - Remove deprecated image defines
fe84c20 Fix out-of-bounds write
b862285 fix possible overflow in effect wrappers.
3e49ad2 GenericSource: reset mDrmManagerClient when mDataSource is cleared.
3292bef DO NOT MERGE - libstagefright: check requested memory size before allocation for SoftMPEG4Encoder and SoftVPXEncoder.
0077bdf DO NOT MERGE nuplayer: do not use cached source for wvm content
6616d19 DO NOT MERGE SoundPool: add lock for findSample access from SoundPoolThread
d42eea9 DO NOT MERGE - OMX: allow only secure codec to remotely call allocateBuffer.
2f8a273 stagefright: check bounds for MediaCodecList.getCodecInfo
2ee14e7 DO NOT MERGE - AudioFlinger: Clear record buffers when starting RecordThread
92d92ff ID3: check possible integer overflow for extendedHeaderSize and paddingSize.
09ac69b Check NAL size before use
aded9bd MPEG4Extractor: ensure buffer size is not less than 8 for LastCommentData.
91f54ae Don't crash when there's no conceal frame
d7d445d stagefright: fix AMessage::FromParcel
c1432cb DO NOT MERGE Fix vulnerability in mediaserver
9b68cec DO NOT MERGE NuCachedSource2: fix possible erroneous early free
cf1338a Limit allocations to avoid out-of-memory
Project frameworks/base
7215c2e fix metrics density comparisons
fda88fd SysUI: Fix hiding sensitive notification behavior
fb22fe5 SysUI: Fix hiding per-app sensitive notifications
56eaddf SharedStorageAgent: fix off by 1
69da9d9 Fonts: add sans-serif fallback fonts first
3c12795 SettingsProvider: allow ambient display/doze mode to be overlayed
4d7ad43 SettingsProvider: Allow default volume adjust sound to be overlayed.
e21c3d2 SysUI: Keep sensitive notifications redacted for swipe
a823e58 Add ability to set preconfirmed apps filter for immersive mode hint
e7f34ea SystemUI: Handle possible NPE on task.group during layout.
9ccd025 bootanimation: Move the bootanimation playaudio code
b475e3b LiveDisplayTile : Update entries on locale changes
4aae432 SystemUI : Show create profile if user doesn't have one setup
47e7161 AppOps: fix wifi scan op
9a56b44 Paella: Enable Spanish single shift table
1e60f9b StrictMode: fix deserialization of ViolationInfo on large stacks
e8ef090 policy: disable EdgeGestureService
610a2bd Fingerprint: fix restarting timeout when screen is on
af416e3 fingerprint improvements
d92368f ThemeService: ManagedProvisioning is a setup package too.
9b84965 Make WIFI_IDLE_MS default into an overlay
75baf57 SettingsProvider: Load notification led customization defaults
f95b627 Fingerprint: handle canclled error code
a22cfa7 ThemeEngine : Use manifest.mf for hash calculation
ea360f8 NavigationBar : Switch to display orientation from config orientation
326bf74 Add custom camera shutter
21ddba5 PowerManagerService: Log when proximity blocks wake
78b287e SystemUI: fix "directly show bouncer" conflicting with smart unlock
eedcc4f Fix lockscreen disabling for MSIM.
ef53d61 DO NOT MERGE. Prevent recents from coming up when in SUW
a1734f0 DO NOT MERGE Ensure that the device is provisioned before showing Recents.
667b1d2 Toast: Fix toast layout for RTL
1ddc07d [PATCH 2/2] Delay hiding the cast icon for 3 seconds. DO NOT MERGE
88f1378 [PATCH 1/2] DO NOT MERGE Send next alarm's show intent via PendingIntent
Project frameworks/minikin
ed4c8d7 Avoid integer overflows in parsing fonts
2nd part of the changelog... (sorry it's long):
Project frameworks/native
b8a86fe IGraphicBufferProducer: fix QUEUE_BUFFER info leak
d9b370c IGraphicBufferConsumer: fix ATTACH_BUFFER info leak
c799fb1 add number constraint for samples per MotionEvent
Project frameworks/opt/hardware
928af15 hardware: Add UniqueDeviceId support
Project frameworks/opt/net/wifi
1e35a44 Use def_wifi_idle_ms to fetch WIFI_IDLE_MS defaults
0ba3cdc wifi: fixup hotspot disconnect on subscriber change
d0315fe Fix a race in WifiNative objects
Project frameworks/opt/telephony
5ecd860 telephony: Fix build on bad cherry-pick resolution.
5736ddb [PATCH] (PICCOLO-4847) [PATCH] Force data attach when data is re enabled after carrier-detatch.
ee07de8 GsmMmiCode: Fix USSD NPE
c8cab0b Suppress error pop-ups for single digit dials.
572af2d Check permissions on getDeviceId.
44c80fd telephony: Avoid NPE during hotswap where user nw is not set for invalid sub.
a14ab34 Implement [BugID:1136] [PM99_SNT][SQV_PR]
52b8ef0 telephony: use default nw mode instead of current when switching subs
Project hardware/cyanogen
4f5359c cmhw: UniqueDeviceId: don't generate hardware IDs from SD card CIDs
f2df045 cmhw: Add UniqueDeviceId implementation
Project hardware/qcom/audio-caf/msm8916
f6620b6 audio: msm8916: Squashed audio amp commits
Project hardware/qcom/audio-caf/msm8974
506b1e1 hal: APQ8084 uses AUDIO_PARAMETER_KEY_BT_SCO_WB for bluetooth wideband
Project hardware/qcom/display-caf/apq8084
056da7f gralloc: Add a switch to use 16 byte pixel alignment
Project hardware/qcom/fm
13c72eb fmapp2: Add support for long press and short press from headset
0ac486a fmapp2: Allow value for the default fm recording duration to be overlayed.
Project hardware/qcom/keymaster
ed1bb46 msm8909: Enable compiling HW specific keystore
Project hardware/ti/omap4
881a349 domx: fix up DCC data loading when USES_LEGACY_DOMX_DCC is set
e57f2b6 domx: add support for tuna
Project kernel/oneplus/msm8974
66c92a3 mmc: cd-gpio fix name scribbling
Project packages/apps/Bluetooth
b93582b DO NOT MERGE Fix SMS delivered successfully but stuck SENDING issue
Project packages/apps/CMFileManager
2c9f1db Adding NULL checks AsyncResultProgram.java
Project packages/apps/Calculator
c40b6a0 Prevent entering more than one decimal symbol during input
Project packages/apps/Contacts
020d6f5 Exporting contacts Max limit
Project packages/apps/DeskClock
7dc4748 DeskClock : Fix "GoogleNow cancel alarms crash"
8069237 Fix missing zh-rCN item entries
Project packages/apps/InCallUI
50f4daf IncallUI: Screen doesn't wakeup after MT/MO call disconnect
decc2ba InCallUI: Fix background colour of tabs on DSDA phones
Project packages/apps/LockClock
b0602ec LockClock : Switch over to new yahoo location api
Project packages/apps/Mms
73026f0 Mms: add ability to remove smart dialer feature
11c7822 Fixed processing of clicking on phone # to send_sms
7021447 ClassZeroActivity: Generate audible notifications on message arrival
afe4d81 Move CM introduced plural string resource to cm_plurals
Project packages/apps/Settings
9c5c399 Settings: Modify RU translation for Ambient display
cf4fa0c Settings: Allow disabling default allcaps state in tabtext.
c95c478 Settings: disable wifi display from search indexing if disabled
e99695e Use same technology type for LTE/4G
7ddd173 RegulatoryDialog : Use String.split to avoid crash on empty args
79c0355 Reapply custom lockscreen when switching to swipe mode
799423d Settings: disable Wifi display from the Settings menu
d763b6d Adding null checks to prevent OnPrepareRemoval() on null object
5304719 Lockscreen: Show redaction interstitial when swipe selected
e7e05a7 Settings: Default edge gesture service to false.
3ae6fe7 Settings: Fix NFC Tap & pay removal
e673911 Revert "Settings: update FOTA link to be implicit"
4a8be6e Settings: update FOTA link to be implicit
c4ce19a Support multiple SAR values, separate args list with ','
045a66e APN Settings: on MVNOs, filter unmatching MMS APNs
49b8117 Settings : Add Russian translation for basic live display
b1cb223 Settings : Ensure translation for live display entries
89f7395 Settings: respect telephony config for profiles override
Project packages/apps/SetupWizard
1bfeb70 Disable immersive mode confirmation for custom lockscreen package
ebe353d SetupWizard: Conditionally run account setup
9527a1a Add hook to set custom default lock screen on setup
f04a5fa SetupWizard: Ensure UI doesn't show when user is guest
9710862 SetupWizard: Remove useless WhisperPushUtils
ae79389 SetupWizard: RIP Whisperpush
15b7c92 SetupWizard: Don't disable packages on main thread
Project packages/apps/ThemeChooser
7d903fe Fix duplicate "Get More" buttons in menu
Project packages/apps/Trebuchet
1c47a87 Switch to 2x2 grid for widget preview
12c1835 Port remote folder fixes from cm13.
690cf8a Trebuchet: fix CTS test failed
3c7f897 Port DragLayer/InsettableFrameLayout margin fix from RemoteFolder cm13 merge patch.
cf2a054 Add empty makefile placeholder.
23e11fb Modify make file to build overlay properly on Jenkins.
1792a57 Merge Remote Folder into mainline.
d3d6774 Trebuchet: Prevent crashes on view id mess up
d11a4f0 Trebuchet: Ignore mnc/mcc config changes
Project packages/services/Telephony
73fbedc Single digit MMI codes invalid.
e8997a1 Telephony: only add vmail sim slot indicator with multi sim
a363fb5 Telephony: Improve call barring settings
5beb9ee telephony: Move caf strings to cm_strings.
e3c2db2 TeleService: Add call barring feature
Project prebuilts/cmsdk
7b8b4c8 prebuilts/cmsdk: Remove COLP definitions.
Project prebuilts/gcc/darwin-x86/x86/x86_64-linux-android-4.9
1fe9a13 Update prebuilt GCC to build 2617618.
4c7e42b Add missing -androidkernel-{nm,size} symlinks.
Project system/core
ac5f7fc liblog: build log_event_write regardless of TARGET_USES_LOGD
1bfbae1 libziparchive: fix fallocate failures
2df6c4a Reserve space on disk using fallocate
Project system/extras
cba516a bootsignature: includes dt image size for signed boot image
Project system/vold
84358d9 asec: Add an extra MB for overhead while transferring app to container
Project vendor/cm
d9f8980 Resolve Orange RO authtype
0a892a2 Modify APN for Orange Romania
6eaf14f contributors: add LG V10
a0f1646 config: common.mk: Remove deprecated CMAccount
10c9e17 config: telephony.mk: Remove deprecated WhisperPush
4209285 fix cricket APN
f5e9995 cm: Fixup maven artifact publish inclusions.
b4b8759 Fix Digi Mobile defaults
Project vendor/cmsdk
af62603 cmsdk: cmhw: Add UniqueDeviceId support
a9f933a cmsdk: add invalid input checking for persistent storage APIs
ba42c2c cmsdk: change persistent storage test cases to void return type
effba20 cmsdk: Add finalized docs for cantaloupe.
1bb37d9 cmsdk: update api for level 3
Project vendor/htc
72ed18f t6-common: Use stock EQ settings
ba2d3b1 t6-common: Update Widevine libs from mako
089b465 t6-common: Update device specific blobs
3f22681 t6-common: Update Adreno libraries
3c76268 t6: cdma: Blob updates
e99858a t6-common: Remove unused fingerprint blobs
dd76701 hima: Rename Broadcom HCD patch file
Project vendor/oneplus
0bbefc0 Add Oneplus X (onyx)
acce058 - Removed non-working laser autofocus blob from the makefile in order to fix camera
Project vendor/oppo
b62ed7d Neo5: Initial Import
I'm your first subscriber!
I apologize for my ignorance, but why would you stick back on 12.1?
Any benefits besides stability compared to the newer builds?
Andranoxi said:
I apologize for my ignorance, but why would you stick back on 12.1?
Any benefits besides stability compared to the newer builds?
Click to expand...
Click to collapse
I guess stability is important for some people.
Enviado desde mi Galaxy Nexus mediante Tapatalk
Stability and fully functional is super important for me. Plus I am only interested in aosp-based ROMs. I've been using this build some nice last week and its by far the best aosp-based ROM available for the m9 IMO. Great work adlx!
New cm12.1 03/24 build for HTC One M9
New cm12.1 03/24 build is out!
Download:
cm-12.1-20160324-UNOFFICIAL-himaul.zip (Mega) (md5: 9b001b3a76b68738409803f24254ff25)
cm-12.1-20160324-UNOFFICIAL-himaul.zip (Mirror)
Changelog:
Project frameworks/av
b053bad SoftVPXEncoder: don't skip the last input buffer with eos flag.
Project frameworks/base
208d62d GlobalActions: Set the initial status of airplane mode toggle
6f108fa Reduce log noise.
bec4158 Support for country specific ECC numbers in the framework
Project frameworks/opt/hardware
94ddbc9 cmhw: Add isSelfManaged for SRE module
Project hardware/cyanogen
8390f32 cmhw: Backport isSelfManaged method to cyanogen hw.
Project packages/apps/BluetoothExt
d0cf21f hiddTestApp: disable from launcher
Project packages/apps/Dialer
c7c7884 Delete failed CallRecording file
Project packages/apps/Mms
cc2c382 Mms: Add support for custom sms notification tone
Project packages/apps/Settings
e92f024 Settings: Update contributors cloud DB
a62d9a2 Settings: disable Cast Screen from QuickSettings
Project prebuilts/cmsdk
38b2af7 update system api
Project vendor/cm
829a9bf cmsdk: bump internal platform revision
Project vendor/cmsdk
268d115 cmsdk: Fix hardware service interfaces.
49a1ddc cmsdk: Add CMHW method to check if SRE is self managed
Awesome! Thx! Downloading now...
i don't mean to sound stupid but, how stable is CM 12.1 on the M9 to be more precise?
No reboots, no crashes, everything works. The only issues I've found are no usb-otg support (I don't think it exists in CM anyway) and sometimes the Google camera app crashes if the first photo is in her mode. I just use the built in CM app instead and it works fine.
New cm12.1 03/25 build for HTC One M9
New cm12.1 03/25 build is out!
Download:
cm-12.1-20160325-UNOFFICIAL-himaul.zip (Mega) (md5: 3ea914af250b2f475e8c0c1d92e32b1d)
cm-12.1-20160325-UNOFFICIAL-himaul.zip (Mirror)
Changelog:
Project frameworks/base
3a90803 base: Fix proximity check on non power key
f919bb1 base: Fix proximity check on power key
Project packages/apps/Settings
2f6f932 Remove "Apps" category when empty
New cm12.1 03/26 build for HTC One M9
New cm12.1 03/26 build is out!
Download:
cm-12.1-20160326-UNOFFICIAL-himaul.zip (Mega) (md5: 7fbbe2b6dc1374b77ff532d8ff060a0f)
cm-12.1-20160326-UNOFFICIAL-himaul.zip (Mirror)
Changelog:
Project prebuilts/cmsdk
5a08d04 prebuilts/cmsdk: Update themes api text.
What is the best firmware for this? I'm having an issue with not being able to stream with any app. I have internet access though, I'm writing this on my m9.
shumanak said:
What is the best firmware for this? I'm having an issue with not being able to stream with any app. I have internet access though, I'm writing this on my m9.
Click to expand...
Click to collapse
2.8.617.4 firmware from here
Its the devloper edition firmware. I have had no issues with it.
BR7fan said:
2.8.617.4 firmware from here
Its the devloper edition firmware. I have had no issues with it.
Click to expand...
Click to collapse
Okay awesome, do you use the youtube app or google play music? I was having an error where it was unable to stream anything. Thanks for the help!
shumanak said:
Okay awesome, do you use the youtube app or google play music? I was having an error where it was unable to stream anything. Thanks for the help!
Click to expand...
Click to collapse
I use YouTube often and had no trouble with it. I never use Google music,so I can't comment on how it runs.
BR7fan said:
I use YouTube often and had no trouble with it. I never use Google music,so I can't comment on how it runs.
Click to expand...
Click to collapse
Okay, I will retry tonight with the linked firmware. Thanks!
Fwiw, I'm using 2.11.617.15 without issues as well.
New cm12.1 03/29 build for HTC One M9
New cm12.1 03/29 build is out!
Download:
cm-12.1-20160329-UNOFFICIAL-himaul.zip (Mega) (md5: d24f8a6c5cab29851105913d281abe5f)
cm-12.1-20160329-UNOFFICIAL-himaul.zip (Mirror)
Changelog:
Project packages/apps/Settings
c9ddae0 Use settings' theme when inflating account prefs
Hi guys. I haven't seen many tweaks for our Redmi Note 7 Pro.
Presentation of Build Manager: ( tweaks build.prop )
It is a module optimized for any device that offers more optimizations than expected and respects the battery. It has been tested several times to guarantee the bugs.
GitHub: https://github.com/pmspr4100/Build-Manager
*** Changelog v1.7***
* Fix: Build Manager
* Add: Network parameters
* Add: Doze parameters
* Add: Soc Qualcomm
* Add: Improves FPS
* Add: Security Knox
* Add: Swap / Zram
* Fix: Better Internet Speed
* Fix: Dalvik Virtual Machine
* Fix: Disables In Error Reporting
* Fix: Optimization RAM
* Fix: 3G & 4G tweaks
* Fix: Improves Audio & Video Codecs
* Fix: Faster Streaming Videos
* Fix: Improves Quality Camera
* Fix: Video Acceleration & HW Debugging
* Fix: WiFi Scan Interval & Canal
Steps to install:
Open Magisk Manager and go to 'Modules'
Press the '+' icon
Uninstall module: RAM management fixes by crok, VoEnabler
Install module Build Manger
Reboot the device
Completed !
Note: The configuration has been thoroughly tested. But I am not responsible for damage to your device.
reserved
Is this recommend for Custom ROMS too? Or just MIUI?
Naveenthemi said:
Is this recommend for Custom ROMS too? Or just MIUI?
Click to expand...
Click to collapse
Not tested on custom rom. and no negative feedback from downloads.
*** Changelog v1.7***
* Fix: Build Manager
* Add: Network parameters
* Add: Doze parameters
* Add: Soc Qualcomm
* Add: Improves FPS
* Add: Security Knox
* Add: Swap / Zram
* Fix: Better Internet Speed
* Fix: Dalvik Virtual Machine
* Fix: Disables In Error Reporting
* Fix: Optimization RAM
* Fix: 3G & 4G tweaks
* Fix: Improves Audio & Video Codecs
* Fix: Faster Streaming Videos
* Fix: Improves Quality Camera
* Fix: Video Acceleration & HW Debugging
* Fix: WiFi Scan Interval & Canal
fays91 said:
Not tested on custom rom. and no negative feedback from downloads.
Click to expand...
Click to collapse
Um infact I see no feedbacks at all, Nice job anyways. Is this recommended in use with a custom Kernel?
It just a build prop tweaks bro no fear just install it will enable all the features what it says. No matter which rom your. I am testing this on Havoc os 3.4. Feedback will come soon! If anything goes wrong just uninstall it from magisk that it?
Tarif.tk said:
It just a build prop tweaks bro no fear just install it will enable all the features what it says. No matter which rom your. I am testing this on Havoc os 3.4. Feedback will come soon! If anything goes wrong just uninstall it from magisk that it?
Click to expand...
Click to collapse
No no, I was asking cos custom ROM's already have their build prop tweaked at times. So was wondering if it would break any functionality..
If you are hard-core gammer then dont use this module it overheat while playing heavy games. In daily day to day use its good nice smoothly works. If you want to use tho then remove Qualcomm soc line from the system.prop at any zip editor or file explorer soc line :-
( # Soc Qualcomm
# -------------------------------
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
ro.product.gpu.driver=1)
Thanks
Will it works on android 11
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelDust ROM is an Android 11 ROM especially built for the current Google Pixel devices and aimed for stability at its core with themes and customizations.
Our philosophy is to offer all the features known from the Google Pixel Factory Images paired with a useful selection of the coolest custom ROM features.
Our project is based off directly from AOSP. We attach great importance to aesthetics, themeability and personalization. For this we have integrated a great selection of space wallpapers and a special theme app (many thanks to Dirty Unicorns for their code base) in the settings of the Android OS.
The PixelDust Crew would highly appreciate if you would take a little of your time and leave your valuable feedback, your honest opinion or just say hello. If you should encounter a bug, or some kind of glitch that seems to be abnormal and you are pretty sure that it is related to the ROM (and not related to any special apps or mods you flashed on top), then please give as many details as possible.
Special shoutouts to Roger.T for his amazingly designed wallpapers, logos and the best bootanimation I ever had on my Pixel!!! If you like our work, please consider to buy Roger the first beer, and a few more for the other team members and spezi77. Cheers!
Disclaimer:
If your device fails to comply with your standards of what you consider functioning, I am not liable. This is provided free of charge and does not come with a warranty. Although, if you provide a log, I can provide some sort of assurance that I will look into your issue.
* Periodic AOSP security updates
* Vendor image and Pixel GApps included (Please do not flash any third party GApps)
* Pixel wallpapers
* PixelDust wallpapers
* PixelDust Launcher
Theming
* Additional dark/black themes, Accent colors, Fonts, Icon shapes, Navbar and QS tile styles
Additional QS tiles
* Always On Display
* Caffeine
* Language
* NFC
* PixelDust Settings
* Screenshot (Partial/Full)
* and many more
Lock screen display
* Ambient wake gestures
* Pixel style Ambient music ticker
* Now Playing support (only Pixel 2 and higher)
Security
* Lock screen PIN quick unlock
* Face Unlock
System Gestures
* Active Edge
* Swipe fingerprint for notifications
* Swipe fingerprint left or right to dismiss notifications
* Volume rocker skips music tracks
* Three-fingers-swipe to screenshot
* Advanced Gestural navigation settings
Status bar
* Status bar items
* Network activity
* Clock & date settings
* Battery settings
Quick settings
* Secure tiles require unlocking
* Battery percentage
* Battery estimate
* Quick QS pulldown
* QS columns/rows customizations
* and many more
Buttons
* Screen off power button torch
* Volume Settings: Playback control, Volume wake, Volume key cursor
Navigation bar
* Navbar visibility toggle
* 3-button navigation options:
* Layout (normal, compact, left-leaning, right-leaning)
* Invert layout of Navbar buttons
* Pixel animation
Gestures
* Status bar dt2s
* Lock screen dt2s
Lock screen
* Battery info
* Charging animation
* Lockscreen shortcuts
* Show/hide quick settings
* Show/hide status bar
* Media cover art
* Media artwork blur level
* Lock screen charging animation
Power menu
* Additional Power Menu options incl. advanced Restart
Notifications
* Less boring heads up
* Notification sound if active
Misc
* Pulse for NavBar, LockScreen and Ambient Screen
* Wake up on charge
* Rounded corners
Not working:
* Motion Sense
Terms & conditions:
By downloading this custom ROM you agree that I, the developer of PixelDust ROM, am not liable in any way, shape or form for any damage done to your device. The PixelDust ROM is provided free of charge and does not come with a warranty.
Downloads:
* Pixel Dust ROM Android 11 incl. GApps
* Boot image (must be flashed before each installation process)
Telegram Discussion Channel: https://t.me/pixeldustcommunity
Telegram Announcements Channel: https://t.me/pixeldustproject
Telegram Build Support Channel: https://t.me/compile_pixeldust
Discord Server: https://discord.gg/ANtVnW8
Pre-requisites:
* You are familiar with helping yourself out of awkward situations. You won't defame or complain at the developer of this ROM for your misfortunes.
* You are familiar with using fastboot
* Bootloader unlocked
* You have created a backup of your ROM & data
First time installing PixelDust ROM, or coming from another ROM:
YOU MUST HAVE AUGUST FACTORY IMAGE!
Flashing stock ROM: Follow these instructions: https://developers.google.com/android/images#coral
Flashing PixelDust ROM:
Download the ROM and boot image
Flash the boot image (this allows stock recovery to flash unsigned rom zip since we dont have TWRP):
Code:
fastboot flash boot boot.img
Wipe userdata (required for first PixelDust/Android 11 install):
Code:
fastboot erase userdata
Reboot into fastbootd:
Code:
fastboot reboot fastboot
Use volume keys and power button to select "Enter Recovery"
Use Power button + volume up to enter Recovery
Select "Apply Update from ADB"
Sideload the ROM zip:
Code:
adb sideload PixelDust-Eleven-aosp-coral-***.zip
Reboot
Dirty flashing PixelDust ROM:
Just skip the step "Wipe userdata"
Thanks to all development teams, e.g. ABC ROM, AICP, AOKP, AOSPA, AOSP Extended, BenzoROM, Bootleggers, CarbonROM, crDroid, DirtyUnicorns, Havoc OS, HentaiOS, LOS, MSM-Xtended Project, OmniROM, Potatoes Project, PureNexus, ProtonAOSP and YAAP, we borrowed a few features and tweaks from.
Source code:
* Unicornblood kernel (by Dirty Unicorns)
Awesome I'll test today! Thanks
====================
2021-08-08
====================
* build/make
1f59712 Merge tag 'android-11.0.0_r40' of https://android.googlesource.com/platform//build into HEAD [spezi77]
* external/boringssl
11a3d50 Merge tag 'android-11.0.0_r40' of https://android.googlesource.com/platform//external/boringssl into HEAD [spezi77]
* frameworks/base
8e47118 DisplayModeDirector: Default min refresh rate to 60 Hz [Adithya R]
020caae base: Allow disabling refresh rate lowering in battery saver [1/2] [Adithya R]
30c50f0 [master] Add madvising of .odex, .vdex and .art files [Jagadeesh Pakaravoor]
b13f28d [master] Stop manually mixing /dev/hw_random. [Elliott Hughes]
1e643fc [master] Make releaseSomeActivities() a oneway call. [Martijn Coenen]
3a58d91 [master] Remove obsolete config_jitzygoteBootImagePinnerServiceFiles. [Nicolas Geoffray]
1c23592 [master] [UPSTREAM] Reset PAC keys on thread creation instead of on zygote fork. [Peter Collingbourne]
d1638f9 AppLock: Update tasks snapshot when needed [jhenrique09]
8c3c1c7 !fixup SystemUI: Fix showing duplicated charging status [Scott Warner]
4a6fcbd Merge tag 'android-11.0.0_r40' of https://android.googlesource.com/platform//frameworks/base into HEAD [spezi77]
* manifest
956a091 Merge tag 'android-11.0.0_r40' of https://android.googlesource.com/platform//manifest into HEAD [spezi77]
* packages/apps/Settings
35044b6 Settings: Add toggle for 60Hz refresh rate on battery saver [2/2] [Adithya R]
0d056e5 Settings: Add preference for maximum screen refresh rate [Adithya R]
9443a68 Settings: Pass Locale.US when formatting refresh rate string [LuK1337]
13b87c6 Settings: Add preference for KEY_MIN_REFRESH_RATE [LuK1337]
ec5441d Add sliders for color balance adjustment: Import de translation. [spezi77]
47dcfe2 Merge tag 'android-11.0.0_r40' of https://android.googlesource.com/platform//packages/apps/Settings into HEAD [spezi77]
* packages/services/Telephony
be77c9f Merge tag 'android-11.0.0_r40' of https://android.googlesource.com/platform//packages/services/Telephony into HEAD [spezi77]
* vendor/google
e3cfa6b bluecross: Update vendor blobs from RQ3A.210805.001.A1 (August). [spezi77]
* vendor/pixeldust
ad4dc27 hentai: CarrierSettings: Update from RQ3A.210805.001.A1 [Dyneteve]
* vendor/pixelgapps
dcdc734 gms: Update from RQ3A.210805.001.A1 [Dyneteve]
====================
2021-08-07
====================
====================
2021-08-06
====================
* device/google/coral
b7dd99f coral: Update product info from RQ3A.210805.001.A1 [fKm]
cacf9b6 Merge tag 'android-11.0.0_r40' of https://android.googlesource.com/device/google/coral into 11 [fKm]
* vendor/google
461a475 coral: Update blobs from RQ3A.210805.001.A1 [Danny Lin]
====================
2021-08-05
====================
====================
2021-08-04
====================
====================
2021-08-03
====================
* frameworks/base
3af7fa2 Fixup charger sound commit. [spezi77]
a1c03e2 Do not show charging animation when disconnecting [Pranav Vashi]
e2c11cc base: Use wireless charging animation for wired charging too [Anushek Prasal]
3ad6589 Fixup! Battery and charger sound [ZeNiXxX]
a0082ef BatteryMeterView: Fix logcat warning spam [limoniumstatice]
78e8925 Graphics: Fix NPE on GradientDrawable [ZeNiXxX]
c6f84f5 SystemUI: Fix NPE on Volume panel plugins [ZeNiXxX]
* manifest
1fed4b4 Manifest for Android 11.0.0 Release 40 (RQ3A.210805.001.A1) [The Android Open Source Project]
====================
2021-08-02
====================
* frameworks/base
38f1199 Drop the O_NOFOLLOW flag. [Nicolas Geoffray]
efbaaee When a pinned file is a jar or apk, ask the runtime for other files. [Nicolas Geoffray]
a89c74a Custom Rounded Corner preference [1/2] [Kshitij Gupta]
fda14ef Revert "Custom Rounded Corner and Padding preferences [1/2] (WIP)" [spezi77]
* packages/apps/Settings
ccd8c8e Use separate accessibility icons for settings and system dashboard. [spezi77]
* packages/apps/Settings/PixelDustSettings
7d0a8b4 Rounded Corners: Cleanup and improvements. * Remove unnecessary rounded corners category in Misc Settings * Fix reset corner radius to default fw value * Remove commented code for Content Padding, which is not going to happen in A11 [spezi77]
====================
2021-08-01
====================
* external/asus/stitchimage
c5b47a7 stitchimage: Enable dexpreopt [Albert I]
* vendor/pixeldust
3e18dcd Revert "changelog: switch back printf to echo" [spezi77]
====================
2021-07-31
====================
* packages/apps/ElmyraService
59827a8 Convert service to singleton for system user [Danny Lin]
====================
2021-07-30
====================
====================
2021-07-29
====================
====================
2021-07-28
====================
====================
2021-07-27
====================
====================
2021-07-26
====================
====================
2021-07-25
====================
====================
2021-07-24
====================
====================
2021-07-23
====================
====================
2021-07-22
====================
====================
2021-07-21
====================
====================
2021-07-20
====================
* vendor/google
e65e1ed floral: RQ3A.210705.001 [limoniumstatice]
====================
2021-07-19
====================
* device/pixeldust/sepolicy
b190748 Legacy WFD video mode settings [DennySPb]
* frameworks/av
c016c07 Legacy WFD output video mode settings [3/3] [DennySPb]
88f3ac8 Enable Wifi Display to support 1920*1080 60fps [wangwei_b]
42f4eea Disable ABI check [xyyx]
d82b078 Log MediaExtractor entry point to MediaMetrics [Santiago Seifert]
6c3e256 audioflinger: Fix audio for WifiDisplay [myfluxi]
eda50ae libstagefright_wfd: Adapt to A11 changes [DennySPb]
5059ab2 libstagefright: Remove libmediaextractor dependency [Adithya R]
d5c55bd Remove libmediaextractor dependency from libstagefright_wfd [Nico]
0d80705 Revert "Move unused classes out of stagefright foundataion" [Nico]
e4e2d44 libstagefright_wfd: video encoder does not actually release MediaBufferBase when done [Vladimir Oltean]
3956742 stagefright: Fix buffer handle retrieval in signalBufferReturned [Angelo G. Del Regno]
838d0e8 stagefright: Fix SurfaceMediaSource getting handle from wrong position issue [zhangbo_a]
320b1fe libstagefright_wfd: libmediaplayer2: compilation fixes [Vladimir Oltean]
097337a Revert "stagefright: remove Miracast sender code" [Vladimir Oltean]
8f49135 Revert "Removed unused class and its test" [Vladimir Oltean]
* frameworks/base
496273e display: Add simple RGB color balance transform [Danny Lin]
4fdcf8a Legacy WFD output video mode settings[1/3] [DennySPb]
* packages/apps/Settings
d5724a4 Add sliders for color balance adjustment via ColorDisplayManager [Danny Lin]
b570022 Legacy WFD output video mode settings [2/3] [DennySPb]
* system/sepolicy
60aba21 [TMP] Silence neverallow check error [Sonal Singh]
====================
2021-07-18
====================
* vendor/qcom/opensource/fm-commonsys
f031b3f fmapp2: don't destroy notification channel on stop [Luca Weiss]
Booted up fine without any issues.
Thanks!
Who-Lep said:
Booted up fine without any issues.
Thanks!
Click to expand...
Click to collapse
Same here, so far looking good
Smooth install, and everything is running great! It's nice to have PixelDust 11 up and running.
It's the same build from
fKm said:
PixelDust ROM is an Android 11 ROM especially built for the current Google Pixel devices and aimed for stability at its core with themes and customizations.
Our philosophy is to offer all the features known from the Google Pixel Factory Images paired with a useful selection of the coolest custom ROM features.
Our project is based off directly from AOSP. We attach great importance to aesthetics, themeability and personalization. For this we have integrated a great selection of space wallpapers and a special theme app (many thanks to Dirty Unicorns for their code base) in the settings of the Android OS.
The PixelDust Crew would highly appreciate if you would take a little of your time and leave your valuable feedback, your honest opinion or just say hello. If you should encounter a bug, or some kind of glitch that seems to be abnormal and you are pretty sure that it is related to the ROM (and not related to any special apps or mods you flashed on top), then please give as many details as possible.
Special shoutouts to Roger.T for his amazingly designed wallpapers, logos and the best bootanimation I ever had on my Pixel!!! If you like our work, please consider to buy Roger the first beer, and a few more for the other team members and spezi77. Cheers!
Disclaimer:
If your device fails to comply with your standards of what you consider functioning, I am not liable. This is provided free of charge and does not come with a warranty. Although, if you provide a log, I can provide some sort of assurance that I will look into your issue.
* Periodic AOSP security updates
* Vendor image and Pixel GApps included (Please do not flash any third party GApps)
* Pixel wallpapers
* PixelDust wallpapers
* PixelDust Launcher
Theming
* Additional dark/black themes, Accent colors, Fonts, Icon shapes, Navbar and QS tile styles
Additional QS tiles
* Always On Display
* Caffeine
* Language
* NFC
* PixelDust Settings
* Screenshot (Partial/Full)
* and many more
Lock screen display
* Ambient wake gestures
* Pixel style Ambient music ticker
* Now Playing support (only Pixel 2 and higher)
Security
* Lock screen PIN quick unlock
* Face Unlock
System Gestures
* Active Edge
* Swipe fingerprint for notifications
* Swipe fingerprint left or right to dismiss notifications
* Volume rocker skips music tracks
* Three-fingers-swipe to screenshot
* Advanced Gestural navigation settings
Status bar
* Status bar items
* Network activity
* Clock & date settings
* Battery settings
Quick settings
* Secure tiles require unlocking
* Battery percentage
* Battery estimate
* Quick QS pulldown
* QS columns/rows customizations
* and many more
Buttons
* Screen off power button torch
* Volume Settings: Playback control, Volume wake, Volume key cursor
Navigation bar
* Navbar visibility toggle
* 3-button navigation options:
* Layout (normal, compact, left-leaning, right-leaning)
* Invert layout of Navbar buttons
* Pixel animation
Gestures
* Status bar dt2s
* Lock screen dt2s
Lock screen
* Battery info
* Charging animation
* Lockscreen shortcuts
* Show/hide quick settings
* Show/hide status bar
* Media cover art
* Media artwork blur level
* Lock screen charging animation
Power menu
* Additional Power Menu options incl. advanced Restart
Notifications
* Less boring heads up
* Notification sound if active
Misc
* Pulse for NavBar, LockScreen and Ambient Screen
* Wake up on charge
* Rounded corners
Not working:
* Motion Sense
Terms & conditions:
By downloading this custom ROM you agree that I, the developer of PixelDust ROM, am not liable in any way, shape or form for any damage done to your device. The PixelDust ROM is provided free of charge and does not come with a warranty.
Downloads:
* Pixel Dust ROM Android 11 incl. GApps
* Boot image (must be flashed before each installation process)
Telegram Discussion Channel: https://t.me/pixeldustcommunity
Telegram Announcements Channel: https://t.me/pixeldustproject
Telegram Build Support Channel: https://t.me/compile_pixeldust
Discord Server: https://discord.gg/ANtVnW8
Pre-requisites:
* You are familiar with helping yourself out of awkward situations. You won't defame or complain at the developer of this ROM for your misfortunes.
* You are familiar with using fastboot
* Bootloader unlocked
* You have created a backup of your ROM & data
First time installing PixelDust ROM, or coming from another ROM:
YOU MUST HAVE JANUARY FACTORY IMAGE!
Flashing stock ROM: Follow these instructions: https://developers.google.com/android/images#coral
Flashing PixelDust ROM:
Download the ROM and boot image
Flash the boot image (this allows stock recovery to flash unsigned rom zip since we dont have TWRP):
Code:
fastboot flash boot boot.img
Wipe userdata (required for first PixelDust/Android 11 install):
Code:
fastboot erase userdata
Reboot into fastbootd:
Code:
fastboot reboot fastboot
Use volume keys and power button to select "Enter Recovery"
Use Power button + volume up to enter Recovery
Select "Apply Update from ADB"
Sideload the ROM zip:
Code:
adb sideload PixelDust-Eleven-aosp-coral-***.zip
Reboot
Dirty flashing PixelDust ROM:
Just skip the step "Wipe userdata"
Thanks to all development teams, e.g. ABC ROM, AICP, AOKP, AOSPA, AOSP Extended, BenzoROM, Bootleggers, CarbonROM, crDroid, DirtyUnicorns, Havoc OS, HentaiOS, LOS, MSM-Xtended Project, OmniROM, Potatoes Project, PureNexus, ProtonAOSP and YAAP, we borrowed a few features and tweaks from.
Source code:
* Unicornblood kernel (by Dirty Unicorns)
Click to expand...
Click to collapse
It's the same build that you posted on Pixel Dust 10 forum? I mean need i to flash this one if I already have installed the build of 22 January??
jubeilecu said:
It's the same build from
It's the same build that you posted on Pixel Dust 10 forum? I mean need i to flash this one if I already have installed the build of 22 January??
Click to expand...
Click to collapse
It looks to be revved, the RCS issues I had don't seem to be there.
jubeilecu said:
It's the same build from
It's the same build that you posted on Pixel Dust 10 forum? I mean need i to flash this one if I already have installed the build of 22 January??
Click to expand...
Click to collapse
It is a build from 29th January so all the changes in sources are in. Also it is an official version. Dirty flashing should be no problem though.
fKm said:
It is a build from 29th January so all the changes in sources are in. Also it is an official version. Dirty flashing should be no problem though.
Click to expand...
Click to collapse
Ok I will try it!
Great work bro.
Could we expect a build for flame soon?
I installed the rom ok but I installed a kernel and it recognized the device as pixel 5, how do I change the device to a pixel 4xl, thanks for supporting
jubeilecu said:
Ok I will try it!
Great work bro.
Click to expand...
Click to collapse
Installed and working.
One question, would be possible to next build include a disabled power button feature on lock screen ?? I mean when the screen is locked you couldn't reboot or power off the device unless you password it.
I saw this feature in others ROM and think it's a great solution in case of lost or stolen.
heocon77 said:
I installed the rom ok but I installed a kernel and it recognized the device as pixel 5, how do I change the device to a pixel 4xl, thanks for supporting
Click to expand...
Click to collapse
This is by design. We spoof the Pixel 5 ID to pass safetynet.
fKm said:
This is by design. We spoof the Pixel 5 ID to pass safetynet.
Click to expand...
Click to collapse
I've found little things here and there for bugs, that's either on my end or due to something I caused myself, but that Pixel 5 thing threw me off, lol.
Even when I reflashed back to stock, my PC still thought I had a Pixel 5 till I uninstalled the USB driver. Also got that " Welcome to your new Pixel 5! " email from Google.
But, there's a Magisk Module that passes Safetynet without having to spoof, I think that's a better option since spoofing the device causes other apps to not work correctly. Biometrics is disabled for me due to the fact that the Pixel 5 doesn't have Face ID.
Edit: Spoofing back to a Pixel 4 XL fixed the biometrics issue with LastPass for me, and still passing safetynet, guessing due to it thinking it's a Pixel 5 by default anyways.
Does NGA display properly on this build?
Curiousn00b said:
I've found little things here and there for bugs, that's either on my end or due to something I caused myself, but that Pixel 5 thing threw me off, lol.
Even when I reflashed back to stock, my PC still thought I had a Pixel 5 till I uninstalled the USB driver. Also got that " Welcome to your new Pixel 5! " email from Google.
But, there's a Magisk Module that passes Safetynet without having to spoof, I think that's a better option since spoofing the device causes other apps to not work correctly. Biometrics is disabled for me due to the fact that the Pixel 5 doesn't have Face ID.
Edit: Spoofing back to a Pixel 4 XL fixed the biometrics issue with LastPass for me, and still passing safetynet, guessing due to it thinking it's a Pixel 5 by default anyways.
Click to expand...
Click to collapse
The dev is aware of the magisk module to pass safetynet (safetynet-fix-v1.1.1.zip). I won't speak for him but it was done on purpose to pass safetynet out of box without the need for any modules. Users are free to do whatever they want (changing model fingerprints for example) but just keep in mind that doing so changes the ROM from the intended design. You may run into other issues that no one can reproduce. When we can't reproduce an issue, it makes it difficult to help or pinpoint the issue. It also makes it more difficult to know if its a true bug or user modification issue (example would be changing the fingerprint to something different than intended).
Just something to keep in mind when reporting bugs or issues. Try to remember what's been changed from the base (core ROM) after installation and report it along with the bug/issue.
GROOVYJOSHCLARK said:
The dev is aware of the magisk module to pass safetynet (safetynet-fix-v1.1.1.zip). I won't speak for him but it was done on purpose to pass safetynet out of box without the need for any modules. Users are free to do whatever they want (changing model fingerprints for example) but just keep in mind that doing so changes the ROM from the intended design. You may run into other issues that no one can reproduce. When we can't reproduce an issue, it makes it difficult to help or pinpoint the issue. It also makes it more difficult to know if its a true bug or user modification issue (example would be changing the fingerprint to something different than intended).
Just something to keep in mind when reporting bugs or issues. Try to remember what's been changed from the base (core ROM) after installation and report it along with the bug/issue.
Click to expand...
Click to collapse
Everything's stable as can be, just a couple kinks here and there within settings without messing with anything, nothing serious.
And yeah, I read about it being intended, but it broke biometrics with some apps. Some still worked perfectly fine without spoofing back to a Coral though.
king_david43 said:
Does NGA display properly on this build?
Click to expand...
Click to collapse
You don't get the colorful Google colors at the bottom, but it's the same UI.
New build with Feb patch was pushed.
As many requested I changed the fingerprint to original Pixel 4 XL and it still passes safetynet. Also live volume steps were added as per request. You can find the changelog in the second post.
Have fun! Dirty flashing may work, I havent tested.
fKm said:
New build with Feb patch was pushed.
As many requested I changed the fingerprint to original Pixel 4 XL and it still passes safetynet. Also live volume steps were added as per request. You can find the changelog in the second post.
Have fun! Dirty flashing may work, I havent tested.
Click to expand...
Click to collapse
Rock on! THANK YOU for the volume steps, that's all I was missing!!