Database Info

[KERNEL] [blu_spark r218 unified OP3/3T] [OOS 5.0.*]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Kernel features:
Build with custom toolchain blu_naro-7.3 (cortex-a57 targeted, build with latest Crosstool-NG from developer snapshot Linaro GCC 7.3-2018.04)
Full -O2 build with device and target flags enhanced, linaro build improvements, etc
Less is more: stockish OP3/OP3T unified builds based on OnePlusOSS/android_kernel_oneplus_msm8996
Systemless installer (doesn't touch system partition, OTA friendly - Nougat only)
Removed some debug and logging options
ARM enhanced performance and battery patches
CVE security patches, general upstream and CAF fixes
Several CPU Governors (blu_active modded own governor by default - fastlane mode available!)
No OC, set 300HZ base timer frequency
msm_performance input boost toggle on/off (enabled by default), tweaked cpu_boost driver
Enhanced TCP methods (westwood is default), Network and Wifi tweaks and updated drivers
Several I/O control tweaks, added schedulers FIOPS and ZEN v2 is default, tweaked and upstreamed filesystems (F2FS, ExFAT, NTFS & CIFS)
Removed verify and forced encryption, Set androidboot.verifiedbootstate=green
Stock thermal driver by default (custom tunables available for ROMs with no thermal daemon)
Disabled hotplug on low battery levels
Optimized crypto routines
Swap and adaptive LMK off by default, 60 apps on background by default
Vibrator Strength tunable and Gesture Haptic Feedback control (touchpanel)
KGSL fixes and reworked GPU driver (use 133MHz min freq to save juice, goes to idle @ 100MHz)
sRGB and KCAL - Advanced color control for Qualcomm MDSS v2 (RGB calibration and post-processing features)
DASH charge and USB Fast Charge (USB mode up to 900mA with MTP on)
Battery/Notification LED control
FS fsync toggle on/off
Wakelock blockers available
zx2c4's wireguard support
CDROM emulation on mass_storage (compatible with DriveDroid 0.10.36+)
init.d support (put your scripts in /system/su.d or /su.su.d [systemless SuperSU], /magisk/.core/post-fs-data.d [Magisk])
Compatible with Kernel Adiutor and others
DOWNLOAD KERNEL ZIP and RECOVERY (No mirrors please)​
Warning: If you come from other kernel or have any issues, you should dirty flash your ROM before flashing blu_spark zip to avoid problems.
Reflash ROM -> if you want root flash SuperSU or Magisk (default, no plugins/modules) -> flash blu_spark.
If you are already rooted or upgrading between blu_spark versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
Builds for OP3/3T are unified (so can be flashed in both devices).
About bugs and troubleshoots: don't bother to post if a log isn't ready or without steps so the behavior can be replicated. I only active support stock OOS with NO mods whatsoever (apart from root). That includes NO support if using xposed, Magisk with modules, etc.
If you're using custom ROMs (including OOS based ones) or Open Betas you're on your own. I'm only interested on debugging stuff in stock and stable OOS.
Save the SOT and battery stats/screenshots for general threads, here we deal with development, not personal tastes and results.
Also don't spam this thread with CM or other ROMs stuff like "this don't work, my app doesn't open, etc" , no OT about OTAs, apps, ROM bugs, Recovery/TWRP troubleshoots and other userspace stuff. There's threads for it, use them.
Going back to stock: This kernel installer doesn't change your filesystem (systemless in case of Nougat). Oreo builds touch system partition.
You can backup your boot & system (Oreo) with TWRP before flashing blu_spark if you want to go back to full stock or just dirty flash your full ROM.
If you like my work, donations are always welcome.
Don't forget to hit thanks and rate the thread nicely, it's free
XDA:DevDB Information
blu_spark op3-op3t, Kernel for the OnePlus 3
Contributors
eng.stk
Source Code: https://github.com/engstk/op3t
Kernel Special Features: Powered by sparky
Version Information
Status: Stable
Current Stable Version: r217 Oreo unified
Stable Release Date: 2018-07-28
Current Beta Version: r218 Oreo unified
Beta Release Date: 2019-03-26
Created 2016-06-24
Last Updated 2019-11-29

wooo great, your kernel for oneplus x is amazing!!!!
welcome

Great job

Great job!

Whoa was waiting for this one, first experience was on OnePlus X, you made that device fly! Going to try this over the weekend!

Will you add oc?

kenzolo said:
wooo great, your kernel for oneplus x is amazing!!!!
welcome
Click to expand...
Click to collapse
Razertje said:
Whoa was waiting for this one, first experience was on OnePlus X, you made that device fly! Going to try this over the weekend!
Click to expand...
Click to collapse
Great to see you guys here :highfive:
matze19999 said:
Will you add oc?
Click to expand...
Click to collapse
idk, I have more urgent stuff to add yet

works dash charge?

liver20 said:
works dash charge?
Click to expand...
Click to collapse
When OnePlus releases the source for it, sure.
Meanwhile no.

Great! I'll be very happy with this kernel [soon]

Chris.nl said:
Great! I'll be very happy with this kernel [soon]
Click to expand...
Click to collapse
Welcome :highfive:

Nice to see you here @eng.stk
Haven't seen you around since you left the Nexus 6 - always liked your kernels and I bet I'll love it here too!

@eng.stk yes!!!!!you are here!!!!I was in love with your kernel......happy to see you there.......yesss!!!

Bye Dash, Hi blu_sp★rk
liver20 said:
works dash charge?
Click to expand...
Click to collapse
eng.stk said:
When OnePlus releases the source for it, sure.
Meanwhile no.
Click to expand...
Click to collapse
I've used blu_sp★rk since OPX and don't need Dash so... I've got r17 running fine on OxygenOS 3.1.3

wow i've read a lot of good things about your previous kernel. looking forward to trying this out on my recently rooted OP3.
Thanks!!
and as an aside, it's awesome to see how much development is already going for a phone that *just* came out. awesome!!

Would love to try but I need the stock kernel to switch back.

therebel88 said:
wow i've read a lot of good things about your previous kernel. looking forward to trying this out on my recently rooted OP3.
Thanks!!
and as an aside, it's awesome to see how much development is already going for a phone that *just* came out. awesome!!
Click to expand...
Click to collapse
Yeah thing swill take some time, new arch for me, lot's of stuff to deal with.
Chris.nl said:
I've used blu_sp★rk since OPX and don't need Dash so... I've got r17 running fine on OxygenOS 3.1.3
Click to expand...
Click to collapse
I only used DASH once to test it out.
Hope OP releases the source soon, it's OP2 fingerprint sensor bs all over again.
Thanks for the "case" btw
Flamehell said:
@eng.stk yes!!!!!you are here!!!!I was in love with your kernel......happy to see you there.......yesss!!!
Click to expand...
Click to collapse
akselic said:
Nice to see you here @eng.stk
Haven't seen you around since you left the Nexus 6 - always liked your kernels and I bet I'll love it here too!
Click to expand...
Click to collapse
So nice to see some more friendly faces :good:
I've been around developing for other 2 or 3 devices

nevermind, i was reading the OP wrong, it says soon for blu-active gov.

I know it's not supported but for anyone on CM13 I gave it a go. On the A3000 I didn't have WiFi or 3g/4g. Just thought I'd let anyone considering testing it what I found.

thanks for the contribution brother

[KERNEL][8 September][OREO/NOUGAT] HyperX [v3.0][UNIFIED][CUSTOM ONLY]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HyperX Kernel
for OnePlus 3/3T
Disclaimer
*** Flash at your own risk! ***
I can and will not take any responsibility for bricked phones or lost data.
It is generally recommended to run a complete Nandroid backup in your custom recovery and safely store your personal data before you flash a new kernel.
Features
Note: This kernel only boots on custom roms for the OnePlus 3/3T (Won't boot on OOS/OB).
Compatible with both Oreo and Nougat
Kernel has been based on AOSPA kernel source, thus battery life will be good. (PS. : kernel is not limited to AOSPA , will work on any custom rom)
Linux 3.18.70
CAF TAG: LA.UM.5.5.r1-05700-8x96.0
Linaro-7.x Toolchain
KCal V2 Color control
Swipe2sleep gestures
USB fast charging
Implemented intermediate frequencies for LITTLE cluster instead of direct jump from 1.59 to 2.1 GHz.
Custom governors include blu_active, elementalX, darkness, etc
Powersuspend Driver
Adreno Idler
Maple Iosched and more
westwood TCP
Some Wakelocks
Boeffla Touch Key Driver [Use a terminal: echo 1 >> /sys/class/misc/btk_control/btkc_mode]
qpnp-haptic: vibration controller
Backlight Dimmer
Rest at hyperx1.me/changelogs
Known issues
None
FAQ
Why you are using Linaro TC? : Because I can.
Can u change to UberTC builds? : NO.
How can I get info about latest updates : Join our group. Link : https://t.me/Hyperx_3 and https://t.me/HyperX_oneplus3 channel.
How frequent will you be giving updates : As soon as there are changes from kernel.org or CAF.
Can I get xyz feature in the kernel : Dont Spam the thread, come and ask in the group.
Download
http://www.hyperx1.me​
Credits to developers
thecrazylex
arter97
Nathan Chancellor
franciscofranco
sultanXDA
grarak
andip71
flar2
engstk
dorimanx
frap129
faux123
akhilnarang
XDA:DevDB Information
HyperX, Kernel for the OnePlus 3
Contributors
TheDemon12
Source Code: https://github.com/TheDemon12/HyperX-3T
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v3.0
Stable Release Date: 2017-09-08
Created 2017-07-28
Last Updated 2017-09-08

HyperX v3
Changelogs :
OREO SUPPORT! (Flash the LOS build which supports NOUGAT and OREO as well)
Reworked on kernel
v3.18.70
Merged 7.2.3 PA changes
Added zzmoove, alucard,nightmare,darkness
Fixed Adreno Idler
Many Iosched(Maple has been set to default)
Added IntelliThermal
FP Boost
Somewhat less idle drain (still around 0.5/hr will fix it soon)
DOWNLOAD: hyperx1.me
PS: For Beta testing join the group and channel

Reserved

Yay! New kernel. .

Extremely good kernel. But having battery drainage. I am using fastlane and set the but cores to value 55,but still getting battery drainage

AANISH said:
Extremely good kernel. But having battery drainage. I am using fastlane and set the but cores to value 55,but still getting battery drainage
Click to expand...
Click to collapse
You got all these stats in just 15 mins?

AANISH said:
Extremely good kernel. But having battery drainage. I am using fastlane and set the but cores to value 55,but still getting battery drainage
Click to expand...
Click to collapse
This version has powersuspend driver. So idle drain wont be much now.
And yeah, fastlane consumes battery.

Aasresh said:
You got all these stats in just 15 mins?
Click to expand...
Click to collapse
Sorry i was using previous version of this kernel for long time. Will report for the new one too

A new kernel, and one for PA at that. Nice! I may give this a shot.

Will this kernel work on oos based rom

prajnay said:
Will this kernel work on oos based rom
Click to expand...
Click to collapse
No. Custom ROMs only.

Flashed this kernel on PA and the off screen gestures don't work.
Anyone else?

DELETED

Ok
I use off screen gestures alot so guess I will have to flash original back then.

HyperX v2
Changelogs :
There are two builds now : One for PA users and one for Non-PA users for gestures to work in both cases
Added Backlight Dimmer
Fixed CPU throttling
Updated kernel and qcacld-2.0 to latest r1_5400 CAF patch
We have our own website now : hyperx1.me
Slight OC to msm8996 (op3 devices)
swappiness is set to 0
DOWNLOAD: hyperx1.me
PS: For Beta testing join the group and channel

I pulled off v2 builds from webpage. One strange bug caused charging to break randomly. Anyways new builds are up on webpage again.
You can reflash the latest builds,
sorry for the trouble.
Thanks

Only missing feature is (swipe2sleep)

anyone getting device copy error when trying to copy files to/from pc when plugged in?

Quick question
What's state notifier and state debugging
Y I can't enable the state notifier ?

is it less idle drain in v 2.0?

[KERNEL] [22/09] PriimaMido 1.5 [MIUI & LOS]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD • SOURCE​
PriimaKernel is designed to gain absolute battery and stability and performance, using well-tested patches from various of the most famous kernel developers around here.​
FEATURES:
Compiled with Google official GCC for best stability
Patched many wakelock sources for better idling
TTL Support
HID Support
NTFS, EXFat Support
Removed many SafetyNet flags, users without root should be passing SafetyNet now
Sound Control (use EXKM or KA for tune)
Optimized SHA/Crypto algorithms, ported from 4.4
Backported Random driver
Updated CPU-Boost driver with lastest commit (less input-latency, more smoothness)
Patched many drivers with Power Efficient Workqueues (better idling and better battery)
Adreno Idler (fully working)
Thermal throttling interface through EXKM or KA
Patched many drivers, reduced load average
KCal Color Control v1.7
Slimbus OC (better sound at higher frequencies)
FSync toggle
CRC toggle
Binder changes from Oreo (+200 commits)
Sched changes from Oreo
LMK changes from Oreo
Removed unused modules, the phone will boot up within 6 seconds now
Added blu_active governor (updated to lastest commits)
Westwood as default TCP
Tuned Westwood for better internet speed
Tuned CFQ for better I/O performance
Bumped Read Ahead to 1024Kb for lightning fast app opening
Many tweaks for better battery and performance
WARNING:
Do NOT flash this over others custom kernels!
I won't support any of unofficial MIUI version (eg: Xiaomi.eu ecc..) as they have some custom mods that could break my kernel
KCal is broken on MIUI, not my fault but Xiaomi!
Torch, and camera might be broken, flash this to fix it! (or blame Xiaomi to update kernel sources) (thanks to @highwaystar_ru)
If you find any bugs during the experience, please report them with Logcat/Ksmg (HERE)
If you experience any random reboot proceed as follow:
Code:
adb shell
cat /sys/fs/pstore/console-ramoops > /sdcard/console-ramoops.txt
exit
adb pull /sdcard/console-ramoops.txt
Installation:
Dirty flash your current rom (or restore boot.img backup)
Flash PriimaMido
Flash Magisk or SuperSU (if you want root)
Contributors:
Code:
@TheScarastic
@franciscofranco
@eng.stk
@flar2
@Umang96
@MEGAX91
and many, many others...
XDA:DevDB Information
[KERNEL] [22/09] PriimaMido 1.5 [MIUI & LOS], Kernel for the Xiaomi Redmi Note 4
Contributors
sys01
Source Code: https://github.com/FedericoBenedetti/android_kernel_xiaomi_msm8953
Kernel Special Features:
Version Information
Status: Stable
Created 2017-08-12
Last Updated 2017-09-22

For stock miui8 mm rom or aosp and los rom???

ayush.gl said:
For stock miui8 mm rom or aosp and los rom???
Click to expand...
Click to collapse
It is only for LOS/AOSP Nougat roms for now
Thread updated

Can I flash it with MIUI stock or do I need AOSP rom?

Good job, thanks.

Brugos27 said:
Can I flash it with MIUI stock or do I need AOSP rom?
Click to expand...
Click to collapse
He already mentioned, it's only for LOS/AOSP based nougat roms.:silly:

"USB fastcharge ported from Kenzo (thanks to flar2)"
Can you explain what this means?

runs with CAF based too?

Thanks for the new kernel.
Added to index!

Hirs_E_Fruit said:
"USB fastcharge ported from Kenzo (thanks to flar2)"
Can you explain what this means?
Click to expand...
Click to collapse
900mAh through USB
It will charge faster

Hirs_E_Fruit said:
"USB fastcharge ported from Kenzo (thanks to flar2)"
Can you explain what this means?
Click to expand...
Click to collapse
BigMike66 said:
runs with CAF based too?
Click to expand...
Click to collapse
yes

sys01 said:
900mAh through USB
It will charge faster
Click to expand...
Click to collapse
@sys01
Ok I already use a special charger witch is faster than the OEM one.
Is there a full feature list?
Spectrum Support?

damn xioami takes ages for bootloader unlocking
Permission ,nice work though can't wait to try

Hi.
Im really impress by the kernel.
I hope you go advance whit sound driver and kcal.
For now the kernel feel really snapy.
Keep going and 10xs.

F2FS support ?

This kernel properly built.The interactive kernel actually cycle through the CPU frequencies properly.But for me battery life is little disappointing..I fell its draining battery as I fell the performance is very well tuned...Well done.I fell battery life can a little better and also I fell Fingerprint boost is not working because screen wakeup time is as it was with stock los kernel.

good job , gonna test it soon . thanks

I am sorry to report this

Thanks For the Kernel..
What ABout NTFS / F2fs Support ..? !

sys01 said:
900mAh through USB
It will charge faster
Click to expand...
Click to collapse
Via usb 3.0 or 2.0?

[EOL][KERNEL][09 AUG][OP3/3T][OOS/H2OS/AOSP] HolyDragon [Oreo 8.x.x and Pie 9.0.0]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Back again!
You may remember me from my SkyDragon kernels for N6/M8/M7/G3 among other devices, I've been off XDA for a year or so, quietly making kernels and roms for myself and personal friends. Decided to come back to show the OP3 some love under my own moniker while the team is on hiatus.
This is the kernel I use as my daily driver, I'm not really looking to add things so if you want more, please find someone/thing else. My goal here to get as much performance out of our device(s) as possible without sacrificing any battery life or stability whatsoever. No Ofast or ffast-math flags that break IEEE and math operations. No beta toolchains. I compile my own toolchains from recent stable release, build them optimizing and targeting a specific processor instead of the whole architecture, and then I use those to build my kernels that are optimized for that same processor. So this kernel is meant to be as stable stock, all the performance, and none of the loss in battery. Anyways, on with the show..
~*~*Information*~*~
Kernel supports all OP3/OP3T devices running OOS Stable 5.0.x or OpenBeta 32-3x(OP3) and 23-2x(OP3T):good:
Kernel source is based on official OnePlus 3/3T openbeta source code :good:
Kernel has been compiled targeting msm8996 specifically :good:
All but C++, AR, objdump compiled with my custom-built Linaro 6.4.1 toolchain with LTO targeting msm8996/SD820/SD821 :good:
C++, AR, objdump from Qualcomm SnapDragon LLVM v6.0.2 targeting kryo :good:
Using ld.lld from clang 7 for linker :good:
No user setup required - optimal settings already applied :good:
~*~*Features*~*~
No user clock-speed modifications
Flar2 sleep/wakegesture features (Disabled by default, no vibration, enable with EX App)
Stock wake gestures still have vibrate functionality
Swappiness set to zero by default (we have plenty of ram)
vfs_cache_pressure set to zero by default (we have plenty of ram)
ZRAM disabled (why write to slow storage when we have all the ram)
Maple IO Scheduler set to default (IMO best balance of performance/battery life)
Westwood TCP Congestion Profile set to default (Personal preference)
CRC Check Toggle-able (disabled by default)(~%30 performance boost when disabled)
FSYNC Toggle-able
Boeffla's LED Notification
Boeffla's Wakelock Blocker
Savoca's KCAL Control
Fast Charge support for PC charging (1amp instead of .5amp)
Tweaked Alucard Governor (not default, will need to set manually)
DTS Eagle+DTS Ultra
KLapse-Livedisplay Support
~*~*Credits and Thanks*~*~
Telegram Group <333
frap129
Flar2
SultanXDA
MyFluxi
TheCrazyLex
Andip71
savoca
engstk
FranciscoFranco
Dorimanx
maxwen
arter97
dianlujitao
LazerL0rd
Joshuous
Tanish2k09
rupansh
DOWNLOADS
OOS/H2OS OREO
HDK_OP3_AK2_V6.6 Oxygen/Hydrogen OREO LINK
------------------------------------------------------------------------------
OOS/H2OS PIE
HDK_OP3_OOSP_V1.0 Oxygen/Hydrogen PIE LINK
NOTE:
Kernel zip tries to disable DM-Verity and forced encryption, you may need root however in order to boot.
Install if on something else: If in doubt, download this, flash latest openbeta zip from OnePlus, immediately reboot back into twrp, swipe to allow modifications, install this kernel, install magisk/supersu, profit.
If you're already on this: you can just flash my latest kernel zip and profit.
AOSP OREO/PIE
HDK_OP3_AK2_OMNI_V0.12 AOSP Oreo/Pie LINK
MD5: 736a8ee96e8462d21164eaf3f329e9d1
NOTE:
This kernel is built from Omnirom source), but should work fine on all AOSP based roms with Oreo blobs..
Has been tested and working with basically every aosp rom except DU and PixelExperience
Official Pie blobs - AOSP/LOS
HDK_OP3_AK3_AOSP_V1.0 LINK
MD5: 63a744f828631aba39fc8f452788665d
~~~~~~~~~~~~~~~~~~~~~~~~
Kernel's have been thoroughly tested but if you somehow find an issue or just want to leave feedback, that's always appreciated ^^
You can find changes(changelog) by looking at my posted source. You can also find my custom toolchain's, crosstool-ng, and other sources listed there.
If you want to contribute to testing pre-release kernels, or need further assistance please join our:
Discord Server
https://discord.gg/4FafqSV
~*~*Donations*~*~
If you want to donate to my coffee fund, I prefer any cryptocurrency over paypal.
Donate with Coinpayments
or just use paypal, thanks!
XDA:DevDB Information
[EOL][KERNEL][09 AUG][OP3/3T][OOS/H2OS/AOSP] HolyDragon [Oreo 8.x.x and Pie 9.0.0], Kernel for the OnePlus 3
Contributors
HolyAngel, Liam_Davenport, MarcAnt01
Source Code: https://gitlab.com/holyangel/OP3.git
Kernel Special Features: Maple IO, Flar Wake Gestures, KCAL, Notification LED customization, slow zram disabled, vfs/vmswap tweaked for performance, DTS Eagle for better audio experience, smoothest+best battery life.
Version Information
Status: Stable
Current Stable Version: 5.0 / 9.1
Stable Release Date: 2018-06-10
Created 2018-01-09
Last Updated 2020-01-14

Reserved
HDK-Mod - v1.0.0
This is my own modified build of Grarak's Kernel Adiutor app. Now unified for all my kernels.
I have added a few extras that were missing for sound control, pdesire audio, DCI_P3 mode, tbalden's kcal modificaiton, sultan's battery cycle/charge commit for msm8996, and Tanish2k09's KLapse-Livedisplay.
You may need to disable Play Protect temporarily to install, working on adding to the play store to negate this issue.
Also changed the theme, and updated some stuff.
Work in progress but needed something to fully control my kernel.
Full credits and much love to Grarak for putting in all the hard work on KernelAdiutor, wouldn't be here without his work.
My source for it is here.

This is an OOS Kernel yes? Or is it for Custom ROMs that are not based on OOS too?

thes3usa said:
This is an OOS Kernel yes? Or is it for Custom ROMs that are not based on OOS too?
Click to expand...
Click to collapse
Oxygen OS only ^^

Been using it for months. It's stable, smooth and battery friendly ^^
Sent from my ONEPLUS A3003 using Tapatalk

Stuck on 1+ logo after flashing on theOne3TOS.... (OB20 based)

twoxa said:
Stuck on 1+ logo after flashing on theOne3TOS.... (OB20 based)
Click to expand...
Click to collapse
May need dm-verity disabled/rooted if you're not already.

Finally posted something.. :good: Ran this for months before I sold my OP3 rock solid no bullsh!t. Good luck with the release!

Thanks ! I'll give a try just for the badass name

thes3usa said:
This is an OOS Kernel yes? Or is it for Custom ROMs that are not based on OOS too?
Click to expand...
Click to collapse
twoxa said:
Stuck on 1+ logo after flashing on theOne3TOS.... (OB20 based)
Click to expand...
Click to collapse
Bryandu13 said:
Thanks ! I'll give a try just for the badass name
Click to expand...
Click to collapse
Just updated kernel download link, was wrong. Make sure you got kernel version 3.7 before you flash please :good:

HolyAngel said:
Just updated kernel download link, was wrong. Make sure you got kernel version 3.7 before you flash please :good:
Click to expand...
Click to collapse
Now I understand why my device was soft bricked ?
Fortunately a dirty flash of my firmware was enough, no data loss.
I'll try the new one !
---------- Post added at 12:56 AM ---------- Previous post was at 12:42 AM ----------
Okay so :
- I flashed the 3.7 version and got stuck to OnePlus logo with "Powered by Android"
- I dirty flashed my ROM (BETA 29) and flashed the Kernel immediately after without rebooting and next I flashed Magisk 15 --> It booted
I'll see how the kernel run now.

Looking forward to trying this out! The name alone is pretty cool!

Hi, thank you for your effort for the kernel
Wanna ask, which apps I need to configure the kernel? Kernel Adiutor or EXKM?

Can It work on the H2OS?

Loved your work on my good 'ol M8, so I'm pretty excited to see you here. Thanks (as) always for the work!

Great to see a new kernel! Didn't see any mention about encryption or dm-verity. Does it bypass encryption and dm-verity?
Thanks

Excellent kernel it seems like solves the unbelievable, not compatible with Oreo's mobile phone game Caton problem.
By the way, what will happen if I use it on 7.1.1

Thanks a lot for the new Kernel, dude!
But, I would request you to add flar2 gestures, because in SA Region, it's kinda uneasy to use fp in winter!

came from a custom kernel on an encrypted 3T with magisk 15.2. managed to install this by first restoring stock versions of my system (system.img as opposed to just system) & boot (flashing Xennet's boot images w/ disabled dm-verity also works) backups. booted once to check everything's fine then back to recovery to flash the kernel. didn't need to reflash magisk as the system i restored from was already rooted. HTH someone who wanna try this kernel
thanks for your work, OP. will test & revert

Flashed on beta 19 but it broke wifi, i was on stock kernel before that. Any thoughts?

[ROM][12L][M307F][M307FN] PixelExperience Plus 12l[Discontinued]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperiencePlus for M30S[M307F|M307FN]
What is this?
PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 12.1
Whats working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint reader
Lights
Sound/vibration
Encryption
Enforcing Selinux
NFC (M307FN)
Known issues
VOLTE/VOWIFI
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Pixel Experience 12(old) Download
Pixel Experience Plus 12.1(latest) M307F | M307FN | OlderVersions
Donate
Liked my work? Buy me a Coffee​
How to Flash
Get latest twrp from here
Backup everything including vbmeta, dtb and dtbo
Wipe system, vendor, product
Format Data -> yes
Flash latest PixelExperiencePlus Build
Reboot system
Android OS version: 12.x
Build author/Device Maintainer: Santhoosh
Source code: https://github.com/GalaxyM30s
Kernel Source: https://github.com/GalaxyM30s/android_kernel_samsung_m30s

Changelogs:
Update 09/06/2022:
PixelExperience_Plus_m307f[n]-12.1-20220608[9]
Increased zram size to 3.5Gb
Incall volume increased
Fixed DRM HD Content play
Synced with May Security Patch
Improved kernel stability
Update 30/04/2022:
PixelExperience_Plus_m307f[n]-12.1-20220430
Added Quick Tap feature
Updated blobs from latest firmware M307FXXU4CVD1 & M307FNXXS4CVC1
Some Kernel changes
Update 26/04/2022:
PixelExperience_Plus_m307f[n]-12.1-20220426
Synced Latest PixelExperience Plus 12L with April 2022 Security Patch
All the PE Plus Features included
Update 06/04/2022:​PixelExperience_Plus_m307f[n]-12.1-20220406
Fixed USB Hal bug in previous build
Update 05/04/2022:
PixelExperience_Plus_m307f[n]-12.1-20220405
Synced latest PixelExperience Plus 12L with March 2022 Security Patch
Dolby Atmos Support added for improved audio output
Supports Mint Kernel [features and changelogs]
Deep Sleep issue fixed with Mint Kernel
Update 10/03/2022:
PixelExperience_m307f[n]-12.0-20220310
Synced latest PE sources which includes Face Unlock
Default camera app changed to GcamGo (Thanks to @fakelog for the commit)
Kernel changes to improve overall battery life
Focused on Performance and Battery life
Update 02/02/2022:
Flash the boot.img from the download link
Includes magisk v24.1 and support zygisk
Unlocked all cpu governors & IO schedulers
PixelExperience_m307f[n]-12.0-20220127​
Synced with latest January security patch
High Touch Sensitivity Included
Added Display Color Modes
Doze Implemented [Experimental]
PixelExperience_m307f[n]-12.0-20220124​
Initial stable release
Fixed Double tap to wake with and without AOD
Implemented Fingerprint gesture
Added Samsung's DAP and Soundbooster Plus
And More

Long live M30s

Great work

Nice Work !!

Thank you santosh bhai for the BEST Custom Roms

Battery fast drain issue
Plz fix this

Hi.
Is it suitable to be used as dialy driver?

Is fast charging working?

Can I lock the bootloader after installing?. because I need to use payment apps like gpay phone pe.kindly provide a solution. Rom is working good till now really appreciate your work
Thank you!!

Updating and flashing Magisk from magisk manager seems to brick the phone. I've cleaned and flashed this ROM thrice now xD
Any idea?

santhoosh said:
Changelogs:
PixelExperience_m307f[n]-12.0-20220127​
Synced with latest January security patch
High Touch Sensitivity Included
Added Display Color Modes
Doze Implemented [Experimental]
PixelExperience_m307f[n]-12.0-20220124​
Initial stable release
Fixed Double tap to wake with and without AOD
Implemented Fingerprint gesture
Added Samsung's DAP and Soundbooster Plus
And More
Click to expand...
Click to collapse
VOLTE Working or Not ?

Its stable and used as daily driver, Fast charging working, You cannot lock the bootloader with custom rom, Do not update magisk it will brick the phone, I will provide update with magisk latest version, Again Volte won't work already mentioned in main post

Thanks santhosh bro for the excellent rom
Is there any way to use banking app on this rom if u have a jio sim linked with ur account ?

Почему ром не видит мою сд карту
Translated by GT: Why can't rom see my sd card

I want to use payment app bro. I got to know that we can by pass using magisk, now how do I install magisk?

Update 02/02/2022:
Flash the boot.img from the download link
Includes magisk v24.1 and support zygisk
Unlocked all cpu governors & IO schedulers

How do i unroot this rom completely. Complete uninstalling via magisk is not helping at all.
Bro help !!!

santhoosh said:
Changelogs:
Update 02/02/2022:
Flash the boot.img from the download link
Includes magisk v24.1 and support zygisk
Unlocked all cpu governors & IO schedulers
PixelExperience_m307f[n]-12.0-20220127​
Synced with latest January security patch
High Touch Sensitivity Included
Added Display Color Modes
Doze Implemented [Experimental]
PixelExperience_m307f[n]-12.0-20220124​
Initial stable release
Fixed Double tap to wake with and without AOD
Implemented Fingerprint gesture
Added Samsung's DAP and Soundbooster Plus
And Mmy device
Click to expand...
Click to collapse
santhoosh said:
Changelogs:
Update 02/02/2022:
Flash the boot.img from the download link
Includes magisk v24.1 and support zygisk
Unlocked all cpu governors & IO schedulers
PixelExperience_m307f[n]-12.0-20220127​
Synced with latest January security patch
High Touch Sensitivity Included
Added Display Color Modes
Doze Implemented [Experimental]
PixelExperience_m307f[n]-12.0-20220124​
Initial stable release
Fixed Double tap to wake with and without AOD
Implemented Fingerprint gesture
Added Samsung's DAP and Soundbooster Plus
And More
Click to expand...
Click to collapse
my device gets into bootloop if i install magisk. can you provide a guide? i flashed the boot.img its the same everytime i install magisk it enters bootloop