Which TWRP works for custom roms? Wanna install AEX - ASUS ZenFone 6 (2019) Questions & Answers

Was able to get the bootloader unlocked, and now I need a custom ROM like AEX or Arrow, but with this recovery: https://forum.xda-developers.com/ze...covery-unofficial-twrp-recovery-asus-t3937844 nothing works. Flashing TWRP installer will make /data stop working, and booting back into the stock Android 10 ROM, Wifi malfunctions, and won't start up.
Any solutions? Some good workable TWRP is anywhere on the site for custom roms? It will be greatly appreciated.

I had to struggle, too, when trying a custom ROM for the first time. Make sure you start with the right stock ROM version (see at individual installation instructions) and follow the guides. For me, I had the ROM stuck at the boot screen, but when I followed the instructions correctly, everything went well.

Related

[Q] Having problems with recovery (LS980)

So I finally decided I wanted to flash custom roms on my new phone (Sprint LG G2). I did some research on the pros and cons and the risks and thought I was smart enough with tech that I could figure it out. I was able to root no problem, it was really easy to just follow the top root thread step by step. Now I'm trying to install a recovery method to backup my stock rom and flash new roms and I'm finding it really difficult. I'm following this guide http://forum.xda-developers.com/showthread.php?t=2522965
I chose this one because it is up towards the top of the forum. I installed flashify and set the recovery image to the latest version of twrp (2.6.3.3) like OP suggested. I then backed up the stock recovery and the restore kernel in flashify. I rebooted recovery and there is an error. I read through the post and someone suggested using the previous twrp recovery image (2.6.3.2). Now it works, I immediately backed up the stock rom (with root). Now I'm worried about flashing a ROM when it says to use the most up to date twrp (which I don't have and I'm not sure how to update it now). Also I'm incredibly frustrated because I've reached my flash limit in Flashify because I was switching between different versions of twrp. I'm also worn out reading through posts to figure out how to get my recovery working and up to date. It's taken me like 3 hours now to get where I am. Can I install custom ROMs on an out dated version of twrp? Are there additional risks? Any information or resources on the recovery would be much appreciated.

[Q] Custom ROMs won't boot

Hey guys, I've seen this issue before yet I've tried everything in a few threads now but have no idea what is happening,I have tried using search function yet no solution has fixed my problem.
Problem:
When installing custom ROMs the installation goes fine. I put the ROM on the sdcard, follow instructions for flashing e.g wipe data/cache etc and then flash GAPPS. However I get stuck on the boot logo of every ROM. I've tried both TWRP and CWM recoveries, both with no luck. Also tried not flashing GAPPS and just trying to flash the ROM to no avail.
Current state of phone:
The phone is currently running stock firmware via downloading factory image and flashing in boot-loader : stock boot, recovery, system image etc
The phone works fine when rooted on stock firmware. E.g no custom rom yet rooted.
Could really do with some help guys, any ideas?
muqy said:
Hey guys, I've seen this issue before yet I've tried everything in a few threads now but have no idea what is happening,I have tried using search function yet no solution has fixed my problem.
Problem:
When installing custom ROMs the installation goes fine. I put the ROM on the sdcard, follow instructions for flashing e.g wipe data/cache etc and then flash GAPPS. However I get stuck on the boot logo of every ROM. I've tried both TWRP and CWM recoveries, both with no luck. Also tried not flashing GAPPS and just trying to flash the ROM to no avail.
Current state of phone:
The phone is currently running stock firmware via downloading factory image and flashing in boot-loader : stock boot, recovery, system image etc
The phone works fine when rooted on stock firmware. E.g no custom rom yet rooted.
Could really do with some help guys, any ideas?
Click to expand...
Click to collapse
same problem simple solution another user informed me of.
simply donwgrade to 4.3 JB stock rom through fastboot. Then you are able to flash a custm rom from the 4.3 stock rom.
Its crazy i have to do this but it worked for me, now im running the xperience rom which is a rom based on 4.4.2 kk.
the 4.3 android stock firmwares are linked somewhere in the FAQ's as well as the guide to ffastboot lash it.
peace.
chairsz said:
same problem simple solution another user informed me of.
simply donwgrade to 4.3 JB stock rom through fastboot. Then you are able to flash a custm rom from the 4.3 stock rom.
Its crazy i have to do this but it worked for me, now im running the xperience rom which is a rom based on 4.4.2 kk.
the 4.3 android stock firmwares are linked somewhere in the FAQ's as well as the guide to ffastboot lash it.
peace.
Click to expand...
Click to collapse
Hey man, worked a charm thanks!
For users who may have the same problem:
After flashing 4.3 onto the device it did NOT boot.
- However I then went into the bootloader flashed custom recovery, I used cwm.
- Then I went into recovery, used adb to push the rom and gapps onto sdcard
- Full wipe and then installed rom. Then installed gapps
Working fine.
Cheers chairsz :good::good:

nandroids, firmware & multiROM - Reqst clarification please!

Multi part question here which, in my mind, are somewhat related.. I've read up on many posts but these questions I still am not totally clear on and would rather not risk bricking trying to experiment....
#1) When a nandroid is taken on a particular firmware (say 4.4.4) and then after upgrading firmware to a different firmware (say 5.0.2) and I encounter a problem where there is no OS left after wiping and failing to install a custom ROM (TWRP will report: no OS installed! are you sure you want to reboot?), can I flash restore the 4.4.4 nandroid and be ok or will I brick because of bootloader incompatibility [I come from motorola phones recently - this is my first HTC]?
#2) When adding additional ROMs to multiROM do the ROMs have to be of the same firmware version? Moreover, can multiROM have a sense ROM as it's primary ROM and a GPE ROM as a secondary ROM and vice versa?
( FYI - as of this posting I still have yet to successfully boot my secondary ROM using multiROM - I can successfully install mod'd TWRP, the manager, and the patched kernel but something is eluding me - anyone with a link to a very simplified and step by step procedure on installing mulitRoom would be appreciated. I thought I had enough understanding [of the procedures I could find anyways] but apparently not, as I obviously can not get secondary Rom to boot.) I'm able to add the ROM in TWRP but when I reboot, the ROM is not listed after pressing cancel and going to the multiROM boot screen, there is simply nothing there.
#3) Re: multirom - When I reboot into the mod'd TWRP recovery and flash gapps (or any zip file for that matter) how do I know which ROM the zip is being applied to (ie: primary or secondary)?
Feel free to answer as many or as few of the questions as I know it is a lot. Thanks in advance!
HTC one m8 verizon, rooted, s-off, BL unlocked,
Successfull flashes of Viper, Skydragon, FluentROM, Adrenaline2.4* (*current DD)
kerryh said:
Multi part question here which, in my mind, are somewhat related.. I've read up on many posts but these questions I still am not totally clear on and would rather not risk bricking trying to experiment....
#1) When a nandroid is taken on a particular firmware (say 4.4.4) and then after upgrading firmware to a different firmware (say 5.0.2) and I encounter a problem where there is no OS left after wiping and failing to install a custom ROM (TWRP will report: no OS installed! are you sure you want to reboot?), can I flash restore the 4.4.4 nandroid and be ok or will I brick because of bootloader incompatibility [I come from motorola phones recently - this is my first HTC]?
#2) When adding additional ROMs to multiROM do the ROMs have to be of the same firmware version? Moreover, can multiROM have a sense ROM as it's primary ROM and a GPE ROM as a secondary ROM and vice versa?
( FYI - as of this posting I still have yet to successfully boot my secondary ROM using multiROM - I can successfully install mod'd TWRP, the manager, and the patched kernel but something is eluding me - anyone with a link to a very simplified and step by step procedure on installing mulitRoom would be appreciated. I thought I had enough understanding [of the procedures I could find anyways] but apparently not, as I obviously can not get secondary Rom to boot.) I'm able to add the ROM in TWRP but when I reboot, the ROM is not listed after pressing cancel and going to the multiROM boot screen, there is simply nothing there.
#3) Re: multirom - When I reboot into the mod'd TWRP recovery and flash gapps (or any zip file for that matter) how do I know which ROM the zip is being applied to (ie: primary or secondary)?
Feel free to answer as many or as few of the questions as I know it is a lot. Thanks in advance!
HTC one m8 verizon, rooted, s-off, BL unlocked,
Successfull flashes of Viper, Skydragon, FluentROM, Adrenaline2.4* (*current DD)
Click to expand...
Click to collapse
You won't brick it.. softbrick/bootloop maybe.. but it's easy enough just to keep a copy of the different firmware zips to flash before restoring that version nandroid.
dottat said:
You won't brick it.. softbrick/bootloop maybe.. but it's easy enough just to keep a copy of the different firmware zips to flash before restoring that version nandroid.
Click to expand...
Click to collapse
Much oblige! I assume then what to do would be to NOT reboot to system but to BOOTLOADER and fastboot flash the zip? or would I flash the firmware from TWRP (I thought firmware had to be fastbootRUU flashed)?
thx again

need advice with flashing rom

Hey, so I installed newest oxygenOS 2.1.4 for oneplus one which cames with its own recovery...I want to go back to cm12.1, don't have backup so I want clean and fresh installation. Now I am not sure what is the best method to do it without problems or bricking my phone, alot of people are bricking their phones when reverting back to cm12.1.
I want to know few things and can't find it on web, can I flash TWRP recovery without problems? Saw posts where people get into bootloops when doing this. Should I download fastboot zips and install it via adb or flashable zips and install it with recovery. If I choose flashable zip than I need to download kernel and modem also right? Or if I choose fastboot zips and don't install TWRP, would there be any problems because right now I see oneplus logo when I am in fastboot so I assume its their version and people said its buggy and flashing ROM with it is like playing russian roulette.
This is so confusing to me and I can't find those answers in flashing guides.
I used this guide http://forum.xda-developers.com/oneplus-one/general/guide-return-opo-to-100-stock-t2826541 to go back to 12.1 than installed custom ROM

Unable to flash any ROM on 6045

Hey there.
So, my 6045 was on that awful MM update filled with ads, so I changed the firmware to the Panasonic one in order to be able to install TWRP and next flash either Lineage or RR.
I have no problem installing TWRP using the Idol 3 suite (Here), however, whenever I try to flash the Lineage zip, or the RR zip, it gets stuck on the Powered by Android screen.
I always wipe everything before flashing the zips.
I have tried wiping cache/dalvik after flashing them, and also not wiping. Either way, and with both roms, the phone gets stuck, and I need to use the Panasonic tool again to restore the phone to a functioning state.
Please help, I've been repeating this process about 10 times, and it's getting very frustrating.
Thanks.
EDIT: Is the version of TWRP somehow relevant for this? The latest version I can install is 3.0, from the link provided. If I try to install this one I get a bootloop. Please help.
Hi, u need to flash the MM partitons zip first then the rom . Look on AlekDev customs roms threads, he usualy has the MM partition file.

Categories

Resources