Hi guys its the 3rd time that i post here in the forum hopping to restore my "dead" Moto G3 XT1543 1GB RAM Snapdragon 410 (MSM8916).
Some days ago I've unlock my phone bootloader in order to install CM14.1 and i did it with success! but my sim card wasn't working, so, I tried to look for a solution. And I found a video on youtube that showed the supost fix for this issue, but i was wrong. I've flashed the file which broke my phone immediately and now my phone doesn't do ANYTHING!! Well, at least it shows on my computer as QDLoader 9008 but for now on I dont know what I have to do! I know that the easiest way to fix it is buying another motherboard, but I think that still hope for someone to find the way to fix it! Well, if the pc recognizes the processor so there's something to be done right?
I had searched all over the internet during this week, and I found some interesting possible ways to fix it, but im not a developer so I need help and opinions from other people.
1)The first way was to change the mode to 9006 aka diag mode though some files wich in theory allows you to acces eMMC partition and restore all the 29 inside partition and recover your phone. The problem is: I don't know how to change it to diag mode, but yea i have the needed files, and i don't have the tool to acces the eMMC of the phone and i dont have a backup of the partitions to write over the corrupted ones.
2)The second way was to use this tutorial *http://www.droidsavvy.com/unbrick-qualcomm-mobiles/* that i still havent tried since my phone isn't with me right now. So, in this supose way we can contact the phone through a tool called QFIL and try to "Inject" the bootloader or whatever, in the phone to foce him into a bootloop and so enabling the fastboot mode which allows you to install a rom later on. well the problem for this one is, i dont know if it works on your moto g3 but i gonna try. (if you try this option tell me and i gonna upload the needed files because the folder avaliable in the link contais files for the processor Snapdragon 610 and Moto G3 processor is a 410)
3) The third way is a Jtag repair in a authorized store, but i dont think Moto G3 have a jtag fix (im posting this possibility because i could be wrong)
4) In this way could be a updated Blank Flash actually used to hard unbrick the Moto G1 and I Guess the G2? But im not a developer and I dont know too much about programing, but i'm sure someone out there is a pro
5) Use the QPST which is kinda the same thing as use a eMMC tool? ( again im not a dev ) and from what i got, is used to config all your phone from scratch. would be good if there's a tuto out there
6) Sit and wait till Motorola release the MBM-CI 5.0 which from what i got is used like the Blank Flash or used to make a Blank Flash idk
AGAIN!!! IM NOT A DEV, THIS IS JUST SOME WAYS THAT I FOUND OUT THERE ON THE INTERNET WHICH COULD BE USED TO FIX YOUR BELOVED MOTO G3!! SO, I'M SHARING ALL MY RESEACH WITH YOU GUYS BECAUSE IS A SHAME HAVE TO DUMP MY DEVICE LIKE THAT OR HAVE TO EXPEND LIKE R$ 500 IN A NEW MOTHER BOARD WHICH IN DOLLAR ITS LIKE 1600 U$D (this is Brazil guys yea it's a horrible country T_T ) SO I HOPE THAT THIS POST HELPS SOMEBODY AND IF YOU GOT SOME INFO SHARE TO HELP US TRY TO FIX THE PHONE!
hey you got successful??? in unbricking your phone?
[email protected] said:
hey you got successful??? in unbricking your phone?
Click to expand...
Click to collapse
not yet, i send my phone to an authorized i hope they can fix it via programming box
IkkyShad said:
not yet, i send my phone to an authorized i hope they can fix it via programming box
Click to expand...
Click to collapse
Ohhkay
You'll need blankflash for this device, that's the only thing which will take it back to bootloader mode so you can flash a firmware. Blankflash is usually found in stock firmwares, however the chances are kinda low
siredux said:
You'll need blankflash for this device, that's the only thing which will take it back to bootloader mode so you can flash a firmware. Blankflash is usually found in stock firmwares, however the chances are kinda low
Click to expand...
Click to collapse
yeah i know, i tried everything in 3 weeks but with no success, unfortunately the moto g3 firmwares are kinda different from other firmwares
IkkyShad said:
yeah i know, i tried everything in 3 weeks but with no success, unfortunately the moto g3 firmwares are kinda different from other firmwares
Click to expand...
Click to collapse
Can we even try a firmware of Moto g 2 Nd gen ,to get into fastboot anyhow ? Bcoz Moto g 2nd gen is hardbirck recoverable
[email protected] said:
Can we even try a firmware of Moto g 2 Nd gen ,to get into fastboot anyhow ? Bcoz Moto g 2nd gen is hardbirck recoverable
Click to expand...
Click to collapse
yeah, you can try but the models are different and also the partitions inside the phone... try it out and if it works you can post here
No u can't try the Moto g2 firmware..... As Moto g2 is also waiting for MBM CI 5 file for lollipop and Motorola is not releasing those file needed for blankflash
Sorry to bump needlessly but has there been any progress in this regard?
Has anyone found a solution or blankflash files?
I managed to hardbrick my device while trying to resize the system and userdata partitions (stupid, I know)
Jaysin365 said:
Sorry to bump needlessly but has there been any progress in this regard?
Has anyone found a solution or blankflash files?
I managed to hardbrick my device while trying to resize the system and userdata partitions (stupid, I know)
Click to expand...
Click to collapse
No... And just like previous Moto devices, it is unlikely we will ever get the necessary files.
Same situation, any updates?
I'm currently facing the same situation with XT1543, it ran Marshmallow 6.0 stock (came with Lollipop) and suddenly it hard bricked (last time i checked there were no software updates and even if there were, the phone would not restart itself to update). I ran blankflash but the results were these:
greeting device for command mode
opening device: \\.\COM3
OKAY [ 0.001s]
greeting device for command mode
FAILED (blank-flash:greet-device:error reading packet)
Click to expand...
Click to collapse
I appreciate any help!
gibarsin said:
I'm currently facing the same situation with XT1543, it ran Marshmallow 6.0 stock (came with Lollipop) and suddenly it hard bricked (last time i checked there were no software updates and even if there were, the phone would not restart itself to update). I ran blankflash but the results were these:
I appreciate any help!
Click to expand...
Click to collapse
If you can't get to the bootloader, it's toast... we do not have the proper files to do a Qload reflash, and the chances of getting them are near zero.
Try the usual... drain the battery and hold Power+Vol Dn (normal method to access bootloader) or press and hold Power+Vol Dn for 15-30 seconds, if you can't get to the bootloader there is NO recovery method available. Sorry.
acejavelin said:
If you can't get to the bootloader, it's toast... we do not have the proper files to do a Qload reflash, and the chances of getting them are near zero.
Try the usual... drain the battery and hold Power+Vol Dn (normal method to access bootloader) or press and hold Power+Vol Dn for 15-30 seconds, if you can't get to the bootloader there is NO recovery method available. Sorry.
Click to expand...
Click to collapse
Thanks for the quick reply, I will post my results here whether it's successful or not.
acejavelin said:
If you can't get to the bootloader, it's toast... we do not have the proper files to do a Qload reflash, and the chances of getting them are near zero.
Try the usual... drain the battery and hold Power+Vol Dn (normal method to access bootloader) or press and hold Power+Vol Dn for 15-30 seconds, if you can't get to the bootloader there is NO recovery method available. Sorry.
Click to expand...
Click to collapse
+1 on this.
The only other thing I would do is take it apart and detach one wire from battery and short that lose wire to the other wire (short the phone, NOT the battery!) for 15 sec or so and reconnect wire to battery and put phone back together and try boot to bootloader (power plus vol-dn). If no go, at that point if it were worth it I would give it to ATT to fix, or toss it in the drawer for parts.
I too hard bricked my g3.
My PC detected it as Qualcomm 9008 mode
Plz help how to solve this
Durga teja said:
I too hard bricked my g3.
My PC detected it as Qualcomm 9008 mode
Plz help how to solve this
Click to expand...
Click to collapse
Tell us how you bricked it?
KrisM22 said:
Tell us how you bricked it?
Click to expand...
Click to collapse
Rooted and installed twrp nd framework on 5.0
Bro accidentally updated to 6.0 on WiFi
Blank screen. No bootloader.
LED blinkinh
Durga teja said:
Rooted and installed twrp nd framework on 5.0
Bro accidentally updated to 6.0 on WiFi
Blank screen. No bootloader.
LED blinkinh
Click to expand...
Click to collapse
beyond my knowledge. Hopefully someone will jump in.
Durga teja said:
Rooted and installed twrp nd framework on 5.0
Bro accidentally updated to 6.0 on WiFi
Blank screen. No bootloader.
LED blinkinh
Click to expand...
Click to collapse
If there is no bootloader and the only thing that can be seen on the computer is QdLoader mode, it's done... Send it to Moto for repair or send it to the recycler, there is no fix we can do.
Hello everyone.
I got the Realme x50 pro(RMX2075) I bought it used from someone and it came with bootloader unlocked, i proceeded to lock the bootloader and now i get this message:
the current image (boot recovery) have been destroyed and can not boot please flash the correct image or contact customer support to fix it..
I cant get into the bootloader mode.. it keeps giving me that message
Ive menaged to conect it to the computer holding volume up and power and pc recognizes something was connected...
from what i see the only way to fix this is using MSM tool.. but it requires a password.
PLEASE HELP, ive no phone right now.,. :/
i beg pls.. someone help me
fixed.,
mikezgen said:
fixed.,
Click to expand...
Click to collapse
Fixed ??? Like you got it to work again ? I have the same exacte issue your having , and ive been trying for a while now
Try this to fix this issue: https://c.realme.com/in/post-details/1271381271037083648
Bootloader should be locked again after this procedere.
Hello,
I Purchased a T-mobile OnePlus 9, Coverted to Global Firmware, unlocked the bootloader and rooted the phone thru Magisk. Then, I have decided to return the phone and made a stupid mistake. Attempted to lock the bootloader thru fast boot without restoring T-mobile stock ROM. Now I am getting "Your device is corrupt" message that is looping every 10-15 secs. I am unable to go into recovery/fastboot mode (Power+Vol buttons not working). And My PC is not recognizing the device. Please help If I can do anything with this situation. Another problem is I am unable to find and download T-mobile firmware anywhere, Please also point me to where I can get T-mobile stock Rom.
Thanks in Advance!
I'm you're saver !!!!
See this : https://www.getdroidtips.com/unbrick-oneplus-9-9-pro/
...
X0PIRAT3 said:
I'm you're saver !!!!
See this : https://www.getdroidtips.com/unbrick-oneplus-9-9-pro/
Click to expand...
Click to collapse
You are a life saver! My device is restored. Thanks a lot.
i think so
Nox vidmate vlc
I unlocked my bootloader was unsuccessful with finding a custom ROM and a TWRP so I stood with the original build short story I locked the OEM since I didn't do anything or installed anything I thought it would go back to normal rescue and smart tells me error in flashing and manual flashing isn't working fastboot works I can give it commands all attempts to flash failed adb sideload doesn't detect my device and there's no operation system it's just stuck on "AP FASTBOOT FLASH MODE (SECURE)"
Been down the bottom it says flashing_locked can someone help me please
Install this software on your windows computer.
It'll recover and install stock
Rescue and Smart Assistant Tool - Motorola
<h6><span style="color:#FFFFFF"><strong>Our Rescue and Smart Assistant tool</strong><br />can help diagnose and resolve issues on your<br />Motorola phone or Lenovo phone/tablet.</span></h6>
www.motorola.com
rotorline said:
Install this software on your windows computer.
It'll recover and install stock
Rescue and Smart Assistant Tool - Motorola
<h6><span style="color:#FFFFFF"><strong>Our Rescue and Smart Assistant tool</strong><br />can help diagnose and resolve issues on your<br />Motorola phone or Lenovo phone/tablet.</span></h6>
www.motorola.com
Click to expand...
Click to collapse
Yeah I tried rescue & smart it stops at 50% and it says error
m.mcneil99 said:
Yeah I tried rescue & smart it stops at 50% and it says error
Click to expand...
Click to collapse
That sounds bad. Maybe try an earlier version of Moto stylus software that you downloaded?
rotorline said:
Install this software on your windows computer.
It'll recover and install stock
Rescue and Smart Assistant Tool - Motorola
<h6><span style="color:#FFFFFF"><strong>Our Rescue and Smart Assistant tool</strong><br />can help diagnose and resolve issues on your<br />Motorola phone or Lenovo phone/tablet.</span></h6>
www.motorola.com
Click to expand...
Click to collapse
Fastboot Flash Single Partition - Flash failed. Please try again tried it again that's what it says
You need to go on lollinet and get the OEM files of your phone and flash the stock from there.
im in same situation no os u find a remedy im told no go unless it gets sent in to moto
m.mcneil99 said:
I unlocked my bootloader was unsuccessful with finding a custom ROM and a TWRP so I stood with the original build short story I locked the OEM since I didn't do anything or installed anything I thought it would go back to normal rescue and smart tells me error in flashing and manual flashing isn't working fastboot works I can give it commands all attempts to flash failed adb sideload doesn't detect my device and there's no operation system it's just stuck on "AP FASTBOOT FLASH MODE (SECURE)"
Been down the bottom it says flashing_locked can someone help me please
Click to expand...
Click to collapse
Managed to solve?
paulb89 said:
im in same situation no os u find a remedy im told no go unless it gets sent in to moto
Click to expand...
Click to collapse
Managed to solve?
no not even a little bit unfortunately. I've tried so many different moto all in one tools . if I could get it to boot in edl I might b able to do something but still working on that
I was talking to a couple people in a Moto g stylish telegram group and somebody said there might be a small small chance that if I short a jumper on the inside of the phone it might unlock the bootloader or help me do it but I don't know too much about that
ok cool if nothing else I have same model device with a broken screen I was thinking of swapping boards but knowledge is limited.im working now when I get home his evening in about 4 hours I'll hit u up
Copo Gold said:
Managed to solve?
Click to expand...
Click to collapse
still llooking at a busted moto. man this sux i love this phone ive tried all types of moto software and nothing. have any sugestions?
Hello, my Motorola e Android phone got hard bricked and it began suddenly with the first error message being constant boot looping and eventually going to an error message with an adroid on its back where it said partition was corrupt or damaged and the only choices were try again or factory reset. I kept trying again.
I tried to fix it and eventually ended up stuck on ap fastboot flash mode(secure) and it says oem locked.
I gave up trying to do it myself and want to factory reset but recovery mode won't work even if I press it, says that start up failed and goes back to fastboot mode. It's stuck.
Serial number is ZY22DLT4R and last letter is a V or W, can't tell.
I dont know to flash or custom rom. Tried a few but I only have windows 10 on my PC and it didn't install drivers properly and I need this phone fixed ASAP . I think I'm considered a newbie.
I also need to know if it's too far gone so I'm prepared to buy another crappy phone and lose all my data. I don't have days/weeks to learn tutorials about how to mod, etc.
Please help.
edit: I don't know if my bootloader is locked or unlocked.
Re-flash phone's Stock ROM by means of this tool
Download Moto Auto Flash Tool v8.2 by Jamesjerss (2022)
Download Moto Auto Flash Tool v8.2 by Jamesjerss to flash Firmware on Motorola Phones. Follow this guide to Root, Unlock Bootloader, etc.
www.ytechb.com