Hello every one i have an issue here, i got a chinese device a samsung galaxy s(it says its an S4 but i think it is an S3)its a 1Ghz dual core processor if im not wrong(firmware use to say MT6575_S01)
it had loaded apparently a wrong rom, the device wasnt loading OS and restore wasnt working, i tryed to flash a new rom with Android Flash Tools, and the device got bricked, i am able to connected to the computer, the device does not turn on, does not charge, but the PC is able to detected as a MTK USB Port Com.
i found that trying to load different rom with the same tool was not possible cause it gives me an error just before start downloading the info(this is because the device lost connection on the device manager) so it doesnt charge anything.
as i already mention i am able to install drivers, but all of them goes like a Com Port, i used USBDeview and i am able to see the old MTK65xx usb drivers but the direction for that port its not valid(at least it does not recognize the device as a USB directly)
i was wondering if any one can help me with this, i need to know if there is any way to prevent windows from disconecting this device or if there is any way to make the device go on away, if i can do that i am sure i can load the image to it.
BTW i tryed a few roms and some of them tell me they cant complete the process cause not enough space, cause it looks like they are for another device.
my system and device specs (device as far as i can get)
device :
CPU MTK6575
Model: M-9162 cnc moviles (could not find any website related to them)
as far as i know the processor is a 1.2 Ghz dual core
512 RAM
dual SIM
8 MP cam (back)
as far as i know it could be 2MP or 1.3 MP on front
Front camera and sensors are located on the left side(not on the rigth side like most of galaxy S· and S$ even clones)
use battery
model : 303
li-ion 2200mAh(it says samsung)
PC SPECS :
Windows 7 64 bits OS
dual core 2.4Ghx processor
4G on ram.
Please help me with this and i will love you all forever
PD : i belive that the model is a replica of I9200 but not sure .
THANKS.
mk6575 bricked device
as an update i manage it to flash a nand rom apparently for an s3 mt6575 NAND memory, but i am not sure if it is the right one, cause memory on smarth phone android dlashing tool, shows flashing 2g of ram and this is my memory test results :
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x10000000 (256MB/2048Mb)
NAND Flash:
Device ID = "[HYNIX] H8BCS0UN0MCR" (100)
Size = 0x20000000 (512MB/4096Mb)
i went to complete succesfull flashing but only ligths up the menu and back touch keys
apparently goes on but the display remains black
any help please c:
Dear All
I Used CDMA Hisense C46b2G with Qualcom SNAPDRAGON 410 QUAD CORE 1.2 GHz
I have problem with IMEI/MEID null, so i can't connect with operator.
I Have try repair with DFS Program, the program can read HH but can't write when i try rewrite IMEI and MEID.
Plz give me solution
Hello Guys!
Seems a huge discussion about android platform but i cannot see my related issue. i am presenting a clear note about all of my issue.
My phone details is
MTK 6737
Name: Symphony
Model: R100
RAM: 3GB
First i have flash my phone using SP Flash tools (format all+download). after that IMEI number not showing and not found anywhere. i have checked huge tutorial, youtube video, forum thread etc a lot but not correct solution. everybody says i must have ROOT ACCESS in order to adjust my IMEI number again.
I got two problem
1. Nvram error (wifi issue)
2. Invalid imei issue
I spend over 14 hours like a whole days with computer & internet to find correct solution. i have downloaded huge driver like ADB driver, CDC driver, MTK USB driver, SN Writer tools AND many more.
Maximum people says "MTK Engineer Mode" then i had opened that, unfortunately, CDC information not available in menu list. more than 10 root app used to get ROOT access but all are failed. i have followed more than 50 tutorial to modify scatter.txt file with navram.bin etc but failed.
Now, i am looking for help from expertise who know about this matter.
Thank you very much.
Hi , I trying to create a LabVIEW based mediatek processor mobile testing software....
I need to know basic DLL and their header to do boot phone in meta and control.....
I am looking for a way to edit firmware for Chinese device buttons (not Android) MTK processor.
Is there a guide to this?