Not my work, but it works fine.
Download from the following link: MOD EDIT: DOWNLOAD LINK REMOVED
1. Unlock bootloader.
2. Enable USB-debugging.
3. Restart in Fastboot modus (power on + volume doen)
4. Open the cmd window where you have downloaded the TWRP image.
Following commands:
- Fastboot devices
- Fastboot flash recovery twrpname.img
- Enter TWRP recovery (power + volume UP)
From there you can do what you want.
OoooooooooooOOoo dje si bolan??? Where did you source the file from?
Thread closed
@OP: Please check your PM-Inbox for more informtion.
strongst
Forum Moderator
Related
hello
my TF300TL has been updated to version 10.4.3.6 of 20120928 and I lost my root access. Exist a procedure to get my root access for this version? thanks
You are the first user with this model, so I don't know how did you rooted your device, and what's your recovery ? You don't give a lot infos.
Are you unlocked ? If not, I think that you should be unlock your device if you want a root to JB
Click on my sig, and you will find all the links and tools that you need.and for unlock, you can use the Asus tool Unlock v.7
and finally, for retrieve your root, use this process which works for the TF300T
== Part 3 - Install recovery and rooting ==
Let's start with installing the recovery
1) Download these 2 files:
- Jellybean recovery with fastboot files: Fastboot files + JB recovery
- Root files => Root files
- You can also download the new CWM Touch recovery if you don't like TWRP: CWM Touch recovery thread or TWRP recovery and download this file : openrecovery-twrp-2.3.1.0-tf300t-JB.blob
2) Extract the recovery with fastboot files zip and open a command prompt in the same folder of the adb and fastboot files (Shift + Right mouse)
3) Reboot into the bootloader of your tablet, type: adb reboot bootloader
4) When your tablet has reached the bootloader navigate with volume down to the usb icon and press volume up to confirm.
5) To flash the recovery type:
- TWRP: fastboot -i 0x0b05 flash recovery twrp.blob
- CWM: fastboot -i 0x0b05 flash recovery CWM-Touch.blob
6) A blue bar will appear and the recovery will be installed, when the blue bar is filled press volume up + power button to reboot into the tablet.
Now we will root the tablet
7) Copy Superuser-3.2-RC3-arm-signed to the internal storage of your tablet. then reboot into the bootloader again.
8) This time you need to select the RCK icon with volume up to enter the recovery image.
9) In recovery flash Superuser-3.2-RC3-arm-signed and reboot into the system
10) Install Supersu from Google Play
11) Open up Supersu, it will ask you to update the binary, choose yes.
12) Now your tablet should be rooted
Click to expand...
Click to collapse
And now crossed fingers
This guide explains how to install custom recovery [TWRP] on Nubia NX512J (Z9Max) device.
This uses a simple and handy tool made by [email protected] to install the TWRP as well as stock recovery on nx512j
The tool supports 3 versions of TWRP to be installed and 3 versions of stock recovery from v2.04, v9.20 & v9.21.
This also means that you can switch from TWRP to stock recovery if you want use stock firmware and vice versa.
The emmc_appsboot.mbn for TWRP and Stock recovery has different layouts this why for stock firmware, stock recovery with specific emmc_appsboot.mbn is required.
while for TWRP modified emmc_appsboot.mbn is required. The tool provides both options.
To begin this you will need following:-
1. Windows computer
2. USB Cable
3. of-course NX512J phone
Steps :-
1. First download the following zip from https://yadi.sk/d/ep-d0Lc63Hgnzr or from https://www.androidfilehost.com/?fid=889764386195916618 maintained by ilya_rat
2. Extract the zip file on your computer wherever you wish
3. Navigate to the extracted folder (Flash_recovery )
4. Run the install_recovery.bat file
5. A window will open showing several options. See the attached picture
6. If you do not have Fast-boot and ADB drivers installed then choose appropriate number and press enter to install the "USB drivers"
7. Power up your phone in fast-boot mode by pressing Power and Volume down button while phone is off until a menu option with nubia logo appears this is fastboot mode
8. A countdown timer can be seen on the fastboot page which restarts the phone after 10 seconds. Press volume up or down key to disable the countdown timer
9. Now connect the phone to PC using USB cable and enter your choice to install the stock recovery or TWRP. For example Choosing 3 option will install " TWRP 3.1.0.0"
10. A message will show that everything is OK if the TWRP is installed. You can reboot the phone to recovery mode from the bootloader menu by navigating using volume keys and using power button to select the option.
now you will greeted with TWRP from here on you can install any custom firmware or root your phone as you wish.
The official version of TWRP can be found at Teamwin website https://twrp.me/devices/nubianx512j.html
Remember:- If you plan to use stock firmware you must install the stock recovery using the tool and install the stock firmware. TWRP is only and only for any custom firmware due to different emmc_appsboot.mbn layout
The commands used in this tool
To install recovery
Code:
fastboot -i 0x19d2 flash recovery twrp*.img
where twrp*.img is the name of twrp recovery image
To install aboot [emmc_appsboot.mbn]
Code:
fastboot.exe -i 0x19d2 flash aboot emmc_appsboot.mbn
Credits
bauuuuu
[email protected]
teamwin team
Donde puedo descargar la aplicacion en version ingles o español
i just ported twrp 3.1.1-1 from libra to aqua, and it suport for OTA update
how to install :
- with adb fastboot :1. turn ur HH to fastboot mode
2. plug ur usb
3. open cmd on ur adb file directory
4. write "fastboot flash recovery twrp-3.1.1-1-aqua.img"
5. fastboot reboot
- with twrp(if u have installed twrp before)
1. save the recovery to ur sdcard
2. turn your recovery mode (press volume up + power button)
3. tap on install
4. tap on image
5. select the new recovery
*if u have stuck on logo install this
1. turn ur hh to fastboot mode
2. on cmd write "fastboot flash boot boot.img"
3. write on cmd "fastboot reboot"
ported by me, tell me if u have some trouble
link bellow
:laugh::silly::good::good:
twrp and boot image:
New TWRP 3.1.1-1-aqua (support OTA update)
en(dot)miui.com/thread-753595-1-1(dot)html
(Source: Xiaomi MIUI Official Forum)
The Stages:
1. Unlocking the bootloader. (search goolge: unlock bootloader huawei)
2. Flashing Custom Recovery.
After unlocked bootloader, you download file root and recovery: https://drive.google.com/file/d/1uNu7oQj1Ja7xfKO8nEkQVnkrtjEg8aAF/view?usp=sharing
==> extract file
==> reboot phone into bootloader ( shutdow, then hit and hold power+ volume up, ==> select fastboot)
==> In PC, Click right mouse while holding left Shift. Run the codes bellow:
fastboot flash recovery recovery.img
NOTE: Once the flash is complete Do not reboot into system. Hold VOL+ and run the following command:
fastboot reboot
Then select Recovery and press VOL- to confirm.
3. Flashing SuperSU
a. Download file boot: https://drive.google.com/file/d/1ztmTtl8NiJD431ARfJI-cUomLH9XXyIF/view?usp=sharing
and place it in your SD card.
b. Enter the recovery mode, Select Flash boot Image and browse for Boot.img you have downloaded and placed in SD card. Flash the boot image and clear cache ONLY then REBOOT into system. After that, Place the SuperSU-v2.79.zip in your Sd card.
c. Reboot into recovery and select Install zip then browse for SuperSU-v2.79-SYSTEMMODE.zip and confirm Install. Reboot your system and Voila You had you Huawei Y6 Pro Rooted.
thread closed until the download links will be available
TWRP is now working on the Umidigi Z2 Pro. Created by user "nmset" over on community.umidigi.com, I Have installed it and works like a charm!
Steps
1. Connect Phone to PC
2. type "adb reboot bootloader"
3. Open CMD and type "fastboot OEM unlock"
4. On device, press vol up to agree.
5. type "cd C:"directory of the .img file"
6. fastboot flash recovery "name of file".img
7. fastboot reboot
DONE!!!
[Note]
You may boot into recovery to see Chinese text, just reboot and it will get to twrp. (mine did this)
[File]
mega dot nz/#!lQNRXKSL!v9CDjgz4w00vY4OoAguPUD90AWbxjTfuaZv5h7aOWPs
[Credit]
community dot umidigi dot com/forum.php?mod=viewthread&tid=17388
Will this work on Z2 or Z2 Special edition?
truetech000 said:
TWRP is now working on the Umidigi Z2 Pro. Created by user "nmset" over on community.umidigi.com, I Have installed it and works like a charm!
Steps
1. Connect Phone to PC
2. type "adb reboot bootloader"
3. Open CMD and type "fastboot OEM unlock"
4. On device, press vol up to agree.
5. type "cd C:"directory of the .img file"
6. fastboot flash recovery "name of file".img
7. fastboot reboot
DONE!!!
[Note]
You may boot into recovery to see Chinese text, just reboot and it will get to twrp. (mine did this)
[File]
mega dot nz/#!lQNRXKSL!v9CDjgz4w00vY4OoAguPUD90AWbxjTfuaZv5h7aOWPs
[Credit]
community dot umidigi dot com/forum.php?mod=viewthread&tid=17388
Click to expand...
Click to collapse
link is not working, can't find the TWRP, can you re upload again? thanks
---------- Post added at 11:52 PM ---------- Previous post was at 11:50 PM ----------
truetech000 said:
TWRP is now working on the Umidigi Z2 Pro. Created by user "nmset" over on community.umidigi.com, I Have installed it and works like a charm!
Steps
1. Connect Phone to PC
2. type "adb reboot bootloader"
3. Open CMD and type "fastboot OEM unlock"
4. On device, press vol up to agree.
5. type "cd C:"directory of the .img file"
6. fastboot flash recovery "name of file".img
7. fastboot reboot
DONE!!!
[Note]
You may boot into recovery to see Chinese text, just reboot and it will get to twrp. (mine did this)
[File]
mega dot nz/#!lQNRXKSL!v9CDjgz4w00vY4OoAguPUD90AWbxjTfuaZv5h7aOWPs
[Credit]
community dot umidigi dot com/forum.php?mod=viewthread&tid=17388
Click to expand...
Click to collapse
got it, just have to change dot to .=)
I have problema with the incryptation
I am able to flash twrp and reboot but in twrp it wont show any folder trees or open the internal storage.
I cannot install anything from twrp but i did get my otg cable to work after formatting a usb stick and putting my magisk zip on the usb and flashing through otg.
I am also unable to get twrp settings to stay put.
After making my settings like 24 h clock and time zone, after every reboot the settings are gone.
Could you mod that Recovery to support flash Project Treble?
HELP
Can someone help me? I try root my umidigi z2 pro ! It's impossible im sad!! Someone? please?