Related
Ok, I have fedora 11 installed on most of my computers, since i love this distro to death. My big thing was trying to get adb to work. This is my guide to get it to work, for now.
First things first. Navigate to /etc/udev/rules.d as root. Create a rules file called 50-android.rules (touch 50-android.rules). NOTE: You are better off looking at the contents and picking a rules number set other than what is listed. Sometimes udev is picky. For the newbies, so if any rules start with '50', then change the number by one or two, like 51 or 52. Paste this into the file:
Code:
SUBSYSTEM=="usb",ATTRS{idVendor}=="0bb4",SYMLINK+="android_adb",MODE="0666"
Make sure you use ATTRS, not ATTR or SYSFS, since this is a newer updated udev system.
After that, run udevadm control --reload-rules to reload your rules files. Now just run ./adb devices as root to make sure it recognized your HTC dream. I am working on this fix right now so you don't need to be root, keep patient. Now you can adb shell into your device either as root OR normal user, just as long as you start the server as root. This is a permissions problem, and hopefully I can fix this and/or find a fix soon.
I wrote this because i searched high and low through google, and only found a few good parts as far as a fix. Hopefully this helps a few people out there.
Just wondering if this has helped anyone. If not, delete this thread or do whatever with it....
I have adb on my eeepc 900 with f11 I believe this method works too as well. although it says it has been tested with ubuntu, it works pretty well with f11.
http://www.talkandroid.com/android-sdk-install-guide/
Installing The Android SDK
First you will need to download the Android SDK pack .zip archive, once downloaded find a suitable installation location on your machine and extract the zipped files.
Please note: This installation location will be referred to as $SDK_ROOT from now on through this tutorial
Alternatively you can add /tools to your root path which will prevent the need to specify the full path to the tools directory along with enabling you to run Android Debug Bridge (adb) along with other command line tools.
To add /tools:
Linux
1. Edit the ~/.bash_profile or ~/.bashrc files looking for a line that sets the PATH variable.
2. Add the full path location to your $SDK_ROOT/tools location for the PATH variable.
3. If no PATH line exists you can add the line by typing the following:
4. export PATH=${PATH}:<path to your $SDK_ROOT/tools>
Click to expand...
Click to collapse
It helped me, since the creation of the file my OpenSuSE 11.0 recognizes the phone perfectly
Thanks a lot for your hint.
thanks it helped me. ill be looking forward to getting it to work without root
just use sudo instead
Just a heads up for user's using Ubuntu 9.10, this isn't needed. I connected my G1 to it and ran ADB with no adjustments to udev or anything else.
Pretty much it works out of the box.
Here is my version
download the .tgz file from googlecode
http://developer.android.com/sdk/index.html
sudo tar -xzvf android-sdk_r3-linux.tgz
Click to expand...
Click to collapse
Code:
sudo gedit ~/.bash_profile
heres my bash_profile
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH=$PATH:/android-sdk-linux/tools
Click to expand...
Click to collapse
logout
login
connect android g1 device via usb to pc
open a terminal
Code:
adb devices
if you cant get a device try it with superuser.
Don't you think that this is all just a little bit excessive?
To make it work in F11, just do this;
Download SDK, extract.
To use, type:
/path/to/sdk/tools/adb
Another option is to edit the /etc/profile and add
PATH=$PATH:/<Path to android-sdk>/tools
This option will allow any user to use the adb tools when logged in or if you
su -
into another user
I wrote a short guide as well for Windows and Ubuntu. Might help others.
Unfortunately, as anyone with a passing acquaintence with ADB knows, the scrolling issue can be a killer. I swear the other day I pressed "up" twice and it composed "rm /sdcard/rootfs.img /sdcard/system.ext2" and executed it. We run Android on our SD's btw.. Was not cool. Instead, I use ADB via telnet and it works beautifully. Here's how:
Code:
adb shell telnetd &
adb forward tcp:9999 tcp:23
Now type this: "telnet localhost 9999"
Enter "root" and hit enter
Finally update PATH: "export PATH=/usr/bin:/usr/sbin:/bin:/sbin:/system/sbin:/system/bin:/system/xbin:/system/xbin/bb:/data/local/bin"
Okay, so 4 lines to enter and you have a "regular, sane" shell connection to the phone and you can actually scroll through history and text without it jumbling the text and executing random code. Enjoy.
lbcoder said:
Don't you think that this is all just a little bit excessive?
To make it work in F11, just do this;
Download SDK, extract.
To use, type:
/path/to/sdk/tools/adb
Click to expand...
Click to collapse
that works too as well but i would rather open up a terminal and type
sudo adb devices
sensimila said:
that works too as well but i would rather open up a terminal and type
sudo adb devices
Click to expand...
Click to collapse
WHY would you want to make it *MORE COMPLICATED*??
There is NO NEED for root.
/path/to/adb ...
THATS ALL.
This is kind of funny... i wrote this because i had trouble with it, so i am just sharing my fix...
In case this is interesting to someone:
The fix mentioned in the first post has to be applied to open SuSE x86 and x64 edition to make the G1 work. The external device works without it, but not the adb device.
Thanks again!
Just wanted to come and post that this does work with OpenSUSE 11.2 x86. Did this hoping to get adb to work with my LG Ally and it does. Thanks!
(Still) works for me on 64bit SUSE 11.4.
Before adding this file, I could not access my device with adb, received permissions errors.
Added this file, and I can shell into my device.
Permissions on adb itself was not the problem, it was access to the device when udev found it.
[edit]Actually used the lines from http://developer.android.com/guide/developing/device.html[/edit]
DO NOT POST IN THIS THREAD BEFORE READING THE WHOLE POST
PLEASE ADD GUIDES TO COMMON ISSUES YOURSELVES
To my recollection, the previous WM Guides thread was successful.. so we'll be moving on to android as well - from beginner to pro.
I hope this thread will provide answers to a decent percentage of your questions.
Please hold until guide collecting is finished..
In the meanwhile you are ALL invited to send me links or full guides to add to this thread.. remember, we are all about sharing.
COMING SOON! (in the meanwhile, you've got a great battery life guide at http://forum.xda-developers.com/showthread.php?t=471521 - be sure to thank BruceElliot for it!)
also, if you decide to post a guide, please keep the guide as neat as possible, with a title containing the LEVEL ([BEGINNER], [INTERMEDIATE], [PRO]) and the commonly searched words so that people who look for it can find it easily. (if you can, use the same color (dark orange) and same size (4) and Bold.. for the main title.. tho that's not a must )
post #2. [BEGINNERS+INTERMEDIATE] Replacing System Files using Android Commander
post #3. [EVERYONE] ADB Workshop by Adrynalyne and Guide by Captainkrtek
post #4. [QUICK FAQ's] Common QnA's for beginners by Timmymarsh (work in progress)
[BEGINNERS] Replacing system files using Android Commander
Replacing system files using Android Commander:
(This post was formally based in the HD2's RTL support thread and revolved around our need to replace frameworks)
so:
1. Download the android SDK from: http://dl.google.com/android/android...08-windows.zip
2. EXTRACT(!!!) the android-sdk-windows to c:\
(make sure you extract the dir - not run the setup from inside the zip file)
3. install Android Commander from http://androidcommander.com
4. Connect your device and make sure it's set to Debugging mode in /settings/applications/development/
5. You might have to set a dir containing your adb.exe file. set it to c:\android-sdk-windows\tools\
6. You will see a Total Commander-like interface. you can then copy the framework.jar file to the correct directory (there's no difference between SD android builds and androids in ROM - the system dir will be shown the same way)
a. Yes, you can replace/delete system files while android is running.
b. (for androids running from SD) Any file copied to /sdcard/android/root/system/X will be copied to /system/X in the system file. The sdcard/android root dir is JUST LIKE your root in ROM androids.
c. Make sure you either created a backup or verified a match in any other way before replacing files like frameworks, zimage, modules, etc.. your android might not boot afterwards (I keep all system.ext2 files backed up so that i can restore them incase i screw something up.)
enjoy
[EVERYONE] ADB Workshop by Adrynalyne and Guide by Captainkrtek
This following guide was rewritten by Captainkrtek, please make sure to thank him for it
Original Post:
(http://forum.xda-developers.com/showthread.php?t=879701)
This workshop was held in #android-learning on irc.freenode.net by XDA Member Adrynalyne. All credit to him for this guide, I simply am taking it and turning it into a guide. Here we go!
You can find the raw IRC log here
Good evening folks, and welcome to my ADB workshop. This is by no means a full explanation on the subject, but more of a crash course to help folks get up to speed, and get more from their devices. There may be some things you already know here, so please be patient and respect those who do not.
Reference Files
http://adrynalyne.us/files/How to install adb.pdf
http://adrynalyne.us/files/Using ADB.pdf
So, lets just start with the basics.
What is ADB?
ADB stands for the android debugging bridge and is used for testing and debugging purposes by developers.
However, we like to get more out of our devices, and its a great way to fix things.
Knowing adb can mean the difference between a paperweight and a working phone.
So, to start with, we will look at installing ADB.
Generally speaking, the Sun/Oracle JDK is required to run all SDK functions.
ADB is but one tool in the SDK arsenal.
So, we begin by downloading and installing the JDK. This can be found here:
https://cds.sun.com/is-bin/[email protected]_Developer
Choose your OS, download and install. I recommend that 64 bit users use the regular x86/32 bit version as well.
Moving ahead, we download the Windows sdk from here:
http://dl.google.com/android/installer_r08-windows.exe
Due to already installing JDK, you won't be stopped by the install process.
Now, if you notice, I installed it to:
C:\android-sdk-windows
I did this because it makes things easier when setting up path variables.
I encourage everyone to do the same, but obviously it is not required.
So, this SDK is handy, but is only good up to 2.2. We want the latest and greatest! (Well I do)
So, we navigate to:
C:\android-sdk-windows\
and we run SDK Manager.exe
If you notice in your PDF file for installing adb, you will notice that you can update, and I made a choice not to include earlier sdk versions.
I won't go into full detail on that, but depending on the version of SDK you have, 8 or 9, it WILL make a difference in using adb.
By default, for version 8 adb.exe resides in C:\android-sdk-windows\tools
By default, for version 9 adb.exe resides in C:\android-sdk-windows\platform-tools
We will assume version 9 in this guide
Really, the SDK is installed and adb is usable right now, but in my humble opinion, its not enough
I like the ability to use adb in ANY directory on my machine.
To do this, we edit Windows's environment variables.
Specifically, the system path.
To do this, we click on start, or the orb (depending on OS), and right click on Computer, left clicking on properties in the menu.
If its windows XP, I believe it brings you into advanced system properties immediatly. Vista and 7 need a second step.
On the left hand side, as you notice I have highlighted in the pdf, left click advanced system settings.
Under advanced tab, we left click environment variables...
There are two boxes here.
We are concerned with system variables, however.
So we scroll down the list and highlight path and click edit.
Ignoring all the extra stuff in here, make sure you are at the end of the line, and type
Code:
;C:\android-sdk-windows\platform-tools
The semicolon allows us to separate it
from the previous path statement.
Click ok all the way out.
We now have ADB setup globally. We can use cmd.exe (I use powershell) and no matter what directory we are in, adb is recognized.
If it is not, make certain you entered the path into system variables, and made no typos.
If you installed to a different location, you will need to adjust the path accordingly.
This concludes the section on installing the Android SDK to use ADB.
This next section will be on using ADB, so please open that pdf now.
Now, this applies to any OS, not just Windows.
Well, with the exception of the USB drivers.
I will not go too much into that, but if you take a look at the PDF, it goes through installing usb drivers for the sdk, and how to download them.
Fiarly straightforward, in that rspect.
Now, to setup our phones to use with the SDK and ADB, we must change some settings.
First, we go to menu softkey, then settings.
We scroll down to Applications and tap it.
Under Development, we will check Enable USB Debugging. Please note the SGS phones are different in this respect.
The USB cable must be unplugged before enabling or disabling this setting.
Once this is done, we are now ready to play with adb
One quick note: If you get device not found/conencted, please reboot your phone. DJ05 has a quirk in it where ADBD randomly crashes on boot.
A reboot will fix this
ADBD= ADB Daemon
Ok, continuing on.
Lets look at installing applications. This is also known as sideloading.
Unlike installing from the SD card, it does not require unknown sources to be enabled.
The command for this is
Code:
adb install packagename
This assumes that you are working from the directory where the file is located.
This will install the application to /data/app.
It will also show sometimes useful errors if install fails.
That is not something you will see from the Android GUI.
Now, a lot of us have probably deleted files with apps like Root Explorer. While this isn't really a bad thing, it leaves behind databases and data for the application removed.
This is where the 0kb applicaiton entries come from.
If you take that application entry name, you can uninstall the extra data via adb.
First we go to the adb shell which logs into the phone.
Code:
adb shell
If we end up with a $, we will want admin rights, in many cases. This is not one of them, I don't beleive.
To get admin rights, you want to type
Code:
su
Look at your phone if this is the first time, it may prompt you to allow access. Else you will get permission denied.
If you are not rooted, this will not work either.
Ok, now that we are logged in, we will type
Code:
pm uninstall packagename
where packagename is the name of the 0kb listing.
Now this seems like a pain in the a** and I agree.
HOWEVER
There will be a time where Manage applications crashes when you try to uninstall it from the phone. In this case, a factory reset, or this method is the only effective way to fix the problem.
Moving on.
How many of us have removed system applications or renamed them? Did you know that you can simply disable them from the system?
Code:
adb shell
su
pm disable appllicationname
This will disable it, and the system will ignore it.
This can be seen as safer than deleting or renaming things, but your mileage may vary.
On the other hand, you can also re-enable these applications.
Code:
adb shell
su
pm enable applicationname
Please note: Not all applications will properly re-enable. I believe a factory reset or reinstall of said application will fix the issue.
Also, application names are absolutely case sensitive.
*nix based Operating Systems see the letter 'a' and 'A' as two different things.
when you log into adb shell, you are playing by android rules
Ok, a lot of us tweak and mod our phones and turning off the device to get to clockwork recovery, or battery pulls, or multiple button holds to get into Download mode are troublesome and annoying at best.
ADB can help us here.
Here, we do not need to be logged into the shell
If we want to merely reboot the phone:
Code:
adb reboot
If we want to go to recovery (works well with voodoo5)
Code:
adb reboot recovery
If we want to go to Download Mode because we need Odin, heaven forbid:
Code:
adb reboot download
Its instant. No waiting on animations or anything else.
Its also handy if Android has locked up, but yet still works in adb.
I for one hate taking my case off to battery pull.
So now we move on to pushing and pulling files.
Sometimes, I don't feel like mounting my sd card to copy a file over to my phone.
I can use this command to push a file straight to my sd card:
Code:
adb push filename /pathtodirectoryonphone
So for instance, if I have test.txt that I want to send, I would type:
Code:
adb push test.txt /sdcard/
and there it goes.
Ok moving on
Pushing files can be done to any directory, however, some are protected.
For instance, /system is going to give you a permission denied or a read only filesystem error.
To get around this, the easiest thing to do is push the file to your sdcard, then log into the shell:
Code:
adb shell
Code:
su
We will then mount the system as writable
Code:
mount -o rw,remount /dev/block/stl9 /system
Then we can use something like
Code:
cp /sdcard/test.txt /system/app/test.txt
cp stands for copy
and it requires the path of the file and destination path. The name of the file is optional
When you copy it, you can rename it to whatever you like.
For instance, if we wanted to backup a file
Code:
cp /sdcard/test.txt /sdcard/backuptest.txt
Now, lets assume you do not have busybox installed.
You non rooted users will not.
Then you must use a slightly more complicated command called dd
This is used like this:
Code:
dd if=/sdcard/test.txt of=/system/app/test.txt
if is for inputfile
of= output file
Not every user friendly, but probably one of the safer copy commands.
Ok, moving on to pulling files.
Lets say you want to get a file from your phone, to modify, backup, etc.
To do this, we simply use adb in this manner:
Code:
adb pull /pathtofile/filename destinationname
For instance, if I wanted to backup ADW launcher in system/app
I would do this
Code:
adb pull /system/app/ADWLaucnher.apk ADWLauncher.apk
And it will pull the file from the phone and put it in the current directory.
Like above, you can specifcy where it goes.
pushing files to the sdcard, it seems prudent to talk about changing permissions.
sdcards are typically fat32, which destroys permisisons, and Android is heavily permission based.
So if you push an application to your sd card, then try to copy it to /system/app/ bad things are going to happen, or the app may not even show up.
So in that case, we use something called chmod.
This is used in this manner
Code:
adb shell
su
chmod 755 /pathtoapplication/applicationname
Keep in mind
you dont want to do this while its still on your sd card.
an example
Code:
adb shell
su
chmod 755 /system/app/ADWLauncher.apk
755 is good for applications and script files.
Just a couple more topics to cover.
Lets go over deleting files.
This becomes especially handy for removing rogue applications.
To do this, we must be in the adb shell.
Code:
adb shell
su
rm /system/app/ADWLauncher.apk
You may need to remount system as writable with:
Code:
mount -o rw,remount /dev/block/stl9 /system
That applies when using chmod as well.
So what I did above was delete ADW Launcher from system/app
However, what if I wanted to delete the entire contents of a directory?
Same thing as before, except
Code:
adb shell
rm -f /data/dalvik-cache/*.*
I just cleared my dalvik-cache with that command
very quick, very effective.
If you just tried that, please reboot your phone now
Ok....this leaves us with the final topic: logcat
logcat allows us to log what the OS is doing, and possibly delve information for when things are not working
its quite simple Reading it is another.
To use logcat
Code:
adb shell
logcat
To logcat to a certain file do
Code:
adb shell
logcat > /sdcard/logcat.txt
Now we let the log settle down to a reasonable amount of data coming in and not a wall of scrolling, then start the app in question. When it gives an error, we hit ctrl-C and kill the adb shell session.
This should have captured enough data to see the error. Now, I prepared an example. A user came to me on IRC, and Google Maps was force closing. Clearing data didnt fix it, Clearing dalvik-cache, and fix permissions did not fix it. In this case, the user did not know how to use adb So I had him grab an app called alogcat from the market and email me the log. This is also a very valid method.
this file explains what the problem was, and highlights what to look for as an example.
http://adrynalyne.us/files/logcat.pdf
___________________________________________________________________
This concludes the guide from Adrynalyne, there will be more workshops such as this one in irc.freenode.net #android-learning.
Thanks to everyone in #samsung-fascinate !
QUICK FAQ's
sources: Q&A Section, The Weekly Q&A Section by XDA News Writers (thanks guys)
Q: ‘Is there any way to block specific apps from using my data connection?’
A: Try the Droid Wall application.
Q: ‘I read how you can make changes in the build.prop file on my Android device. How exactly do I get to it?’
A: Install ASTRO file manager, browse to /system, long press on build.prop – Edit – Copy. Press on the home icon then Edit icon – Paste. Connect sd card, edit it, and paste it over from where you copied build.prop
Q: What happens if I update my phone? will I need to re-root it and get the ROM again? will all of my applications get erased? If so, is there a way around this?
A: You will lose your root, but not apps if it is just an update.
Q: I just tried to flash a ROM from recovery on my Android phone and got “Verification Failed, Installation Aborted” What happened?
A: Before you can flash a custom ROM the .zip file must be digitally signed in the ROM kitchen, if unzipped and re-zipped it will lose its verification, this happens often using the Safari browser as it likes to decompress .zip’s. Or if your download is corrupted (download the ROM again) it will fail the Verification.
Q - HTC Location Widget shows "map data unavailable"
A - On the widget, click the pin/then click the windows button/click get more/scroll to download maps/download relevant map (care, maybe a big file). Now exit and click onto map, your location should now be visible :)
Q:So, I moved all the apps on the SD, but is still not enough. How can I free some memory? I could delete the cache of the older upgrade or something else?
A:Do you have pictures and videos? If so, check if they are on the SD card and not on your internal memory. Cleaning your cache helps, and try deleting your text messages threads.
Q: ‘What exactly is a kernel and what are the benefits in changing it?’
A: A kernel is a bridge between the applications and the actual data processing done at the hardware level. The kernel’s responsibilities include managing the system’s resources – the communication between hardware and software components. Flashing different kernels gives you different operating speeds, better battery life, the ability to overclock, and more.
Android control other device with IOIO Board.
It use ADB.
http://androidcontrol.blogspot.com/2011/10/ioio-board-for-android-control-io.html
timmymarsh said:
QUICK FAQ's
sources: Q&A Section, The Weekly Q&A Section by XDA News Writers (thanks guys)
Q: ‘Is there any way to block specific apps from using my data connection?’
A: Try the Droid Wall application.
Q: ‘I read how you can make changes in the build.prop file on my Android device. How exactly do I get to it?’
A: Install ASTRO file manager, browse to /system, long press on build.prop – Edit – Copy. Press on the home icon then Edit icon – Paste. Connect sd card, edit it, and paste it over from where you copied build.prop
Q: What happens if I update my phone? will I need to re-root it and get the ROM again? will all of my applications get erased? If so, is there a way around this?
A: You will lose your root, but not apps if it is just an update.
Q: I just tried to flash a ROM from recovery on my Android phone and got “Verification Failed, Installation Aborted” What happened?
A: Before you can flash a custom ROM the .zip file must be digitally signed in the ROM kitchen, if unzipped and re-zipped it will lose its verification, this happens often using the Safari browser as it likes to decompress .zip’s. Or if your download is corrupted (download the ROM again) it will fail the Verification.
Q - HTC Location Widget shows "map data unavailable"
A - On the widget, click the pin/then click the windows button/click get more/scroll to download maps/download relevant map (care, maybe a big file). Now exit and click onto map, your location should now be visible :)
Q:So, I moved all the apps on the SD, but is still not enough. How can I free some memory? I could delete the cache of the older upgrade or something else?
A:Do you have pictures and videos? If so, check if they are on the SD card and not on your internal memory. Cleaning your cache helps, and try deleting your text messages threads.
Q: ‘What exactly is a kernel and what are the benefits in changing it?’
A: A kernel is a bridge between the applications and the actual data processing done at the hardware level. The kernel’s responsibilities include managing the system’s resources – the communication between hardware and software components. Flashing different kernels gives you different operating speeds, better battery life, the ability to overclock, and more.
Click to expand...
Click to collapse
Thank you for your patience and taking the time to answer those questions. I loved your simple and easily digestible format.
There is a note
*nix based Operating Systems see the letter 'a' and 'A' as two different things.
when you log into adb shell, you are playing by android rules
Click to expand...
Click to collapse
this note is all wrong..
1. linNUX is not *NIX.
2. Mac OS-X is a *NIX OS, it is based upon UNIX, they use their own variant called Darwin. Darwin does not require capitolization.
3. The word should be POSIX. Linux is POSIX compliant and POSIX defines the capitolization standardards
soft brick
Taioba said:
Is there any way to use ADB even though I can not enable USB debugging by the android?
I have an Atrix with soft-brick. How can I restore a file (framework-res.apk) knowing that my USB debugging is off?
I can enable ADB via fastboot?
Thanks!
Click to expand...
Click to collapse
I found this for atrix 4g....
http://forum.xda-developers.com/showthread.php?t=965546
hope it helps
knoknot said:
i have a bricked s2 not so sure how to go about reviving it via adb
Click to expand...
Click to collapse
check this thread
http://forum.xda-developers.com/showthread.php?t=1237815
thanks. searched for that
Thanks for it.
Great Guys............ :good:
Thanks for sharing.
Thanks for sharing this guild :d, i am new member for reccod
Great job~ Sometimes could be used this.
I'm using Windows 10 RTM and I've set the path, yet I still get the "unrecognized application" error in the command console. What am I missing?
Nevermind, a restart fixed it. Used to be you didn't have to.... sheesh.
nir36 said:
Replacing system files using Android Commander:
(This post was formally based in the HD2's RTL support thread and revolved around our need to replace frameworks)
so:
1. Download the android SDK from: http://dl.google.com/android/android...08-windows.zip
2. EXTRACT(!!!) the android-sdk-windows to c:\
(make sure you extract the dir - not run the setup from inside the zip file)
3. install Android Commander from http://androidcommander.com
4. Connect your device and make sure it's set to Debugging mode in /settings/applications/development/
5. You might have to set a dir containing your adb.exe file. set it to c:\android-sdk-windows\tools\
6. You will see a Total Commander-like interface. you can then copy the framework.jar file to the correct directory (there's no difference between SD android builds and androids in ROM - the system dir will be shown the same way)
a. Yes, you can replace/delete system files while android is running.
b. (for androids running from SD) Any file copied to /sdcard/android/root/system/X will be copied to /system/X in the system file. The sdcard/android root dir is JUST LIKE your root in ROM androids.
c. Make sure you either created a backup or verified a match in any other way before replacing files like frameworks, zimage, modules, etc.. your android might not boot afterwards (I keep all system.ext2 files backed up so that i can restore them incase i screw something up.)
enjoy
Click to expand...
Click to collapse
Thanks, this Guide is very informative
Help with LG D722
I'm using LG D722 phone and I somehow unlocked bootloader and installed twrp recovery. I backed up Lollipop that's what I'm using and i want to restore custom ROM
I know I need to install Google Apps after installing Custom ROM. But Do I also need to install Modem files on my device ? Because I can't find them on XDA Forums. Please give me a link or something. The help is not just appreciated but seriously needed.
Success. Thanks
Hello, I walk testing one recovery but I'm booting before flashing, the question is, will the recovery feel same when booted vs flashed? I've booted and used to flash a pair of zips but felt very laggy and bugged although did the work right. Thanks
Edit: solved, tried myself
Sent from my SHIELD Tablet K1 using XDA-Developers mobile app
http://forum.xda-developers.com/showthread.php?t=872128&page=2
Hey TF owners,
For anyone looking for a way to mount their Transformer to Linux Mint, I wrote a script to automate the process of configuring your machine to allow you to browse/modify files on the tablet's SSD. This will probably also work on Ubuntu, but I have only so far tested it on Linux Mint.
Download the attached file, and run it.
Edit: Connect your Transformer to your PC before running.
Edit 2: You only need to run this script once - not every time you connect the tablet to your PC.
Hit the thanks button/comment if this worked for you. If not, also comment and I/someone will probably help you out. Also, if anyone tests it on Ubuntu successfully, be sure to comment and let people know.
Note: All configuration files are backed up in the script before changes are made. You can always revert safely.
I'll throw in the ever so popular "use at your own risk" for safe measure.
Cheers.
June 29: Updated script uploaded.
-Cleaner
-Removes an unnecessary comment pushed into fstab in the previous script
-Already executable. Just run it. [Thanks MagnusRagnarok for the idea]
-Packed in 7z from Linux Mint this time as opposed to in zip format from the TF, for [hopefully] universal accessibility.
-md5sum 615f2bfa820ee9ac8ea2c967149a2f03 TransformerMount2.7z
ok so maybe a stupid question, but does my tf need to be rooted to try this? also if you can create an automated script to install a linux distro you think it would be possible for you to create a script to root?? btw any idea on what actually works? can the tegra 2 run with compiz??
0lddirtypaki said:
ok so maybe a stupid question, but does my tf need to be rooted to try this? also if you can create an automated script to install a linux distro you think it would be possible for you to create a script to root?? btw any idea on what actually works? can the tegra 2 run with compiz??
Click to expand...
Click to collapse
I thin you've misunderstood the intention of the OP.
It was to be able to mount your Transformer under Linux and be able to read/write the files stored on the Transformer's internal storage. Not to actually install a full blown Linux Distro on your Transformer.
Wow, talk about reading before posting.
Sent from my Transformer TF101 using XDA Premium App
only on linux mint--
does it work on ubuntu?
Yes, this works perfectly on ubuntu
I have a problem extracting the zip file with Ubuntu 10.10
Do I need an alternate unzip program? If so please specify. I do not run MS products.
Error:
7-Zip 9.04 beta Copyright (c) 1999-2009 Igor Pavlov 2009-05-30
p7zip Version 9.04 (locale=en_CA.UTF-8,Utf16=on,HugeFiles=on,4 CPUs)
Processing archive: /tmp/TransformerMount.zip
Extracting TransformerMount.bash Unsupported Method
Sub items Errors: 1
I can extract it with 7zip on Windows on the work computer, and with both Explorer and AndroZip on the TF without issue.
Sent from my Milestone using XDA App
Acer Mod of the script
I'm trying to edit the file for use with an Acer Iconia. So far everything works but the modifying of the android.rules file. You see, it doesn't exist on my laptop (mint 11) in the directory the script looks at nor is there an android.rules file in lib/udev/rules.d. While I could probably write a rules file and make it work, I'd like to know where it comes from and maybe discover why it does not exist on my system. Anyone have any ideas? Also - rootblock - if I can get this to work would you object to my posting it in the Iconia forum? Thanks!
UPDATE:
Creating the file worked fine. Any reason to edit the script to check if the file exists and create it if it doe not or am I the exception to the rule? i.e. Would most users have it there in the first place?
3DSammy said:
I have a problem extracting the zip file with Ubuntu 10.10
Do I need an alternate unzip program? If so please specify. I do not run MS products.
Error:
7-Zip 9.04 beta Copyright (c) 1999-2009 Igor Pavlov 2009-05-30
p7zip Version 9.04 (locale=en_CA.UTF-8,Utf16=on,HugeFiles=on,4 CPUs)
Processing archive: /tmp/TransformerMount.zip
Extracting TransformerMount.bash Unsupported Method
Sub items Errors: 1
Click to expand...
Click to collapse
Probably a bad download. And you could also try file-roller to open it (I think its installed by default, it is on Debian/Gentoo)
Tortel1210 said:
Probably a bad download
Click to expand...
Click to collapse
I installed the "p7zip" deb, re-downloaded a few times with Firefox and even tried wget. Each time I get the same error result. I was more interested in examining the bash file as I do not have a TF yet. Oh well not a big deal.
3DSammy said:
I have a problem extracting the zip file with Ubuntu 10.10
Do I need an alternate unzip program? If so please specify. I do not run MS products.
Error:
7-Zip 9.04 beta Copyright (c) 1999-2009 Igor Pavlov 2009-05-30
p7zip Version 9.04 (locale=en_CA.UTF-8,Utf16=on,HugeFiles=on,4 CPUs)
Processing archive: /tmp/TransformerMount.zip
Extracting TransformerMount.bash Unsupported Method
Sub items Errors: 1
Click to expand...
Click to collapse
Had the same issue with Archive manager - Xarchiver worked, however.
ubuntu & Asus transformer
If anyone having a problem with mtpfs on ubuntu especially version 10.4 ( segfault problem which prevents from mounting the TF), use newer version of mtpfs in the link below.
http://pkgs.org/download/debian-wheezy/debian-main-i386/mtpfs_0.9-3_i386.deb.html.
1. install the package
ubuntu> sudo dpkg -i mtpfs_0.9-3_i386.deb
2. Then run rootblock script if you did not do it.
just wondering, would this have any effect for the adb connections ? My ubuntu cannot find the transformer from adb but could mount it just find
Try This....
anyone having issues try one of the following extensions.. tar.gz would be my first suggestion for those using ubuntu like myself. i also took the liberty of changing the perms to exe on the script before i compressed all these so now all you need to do is
1.download the extension pack i upped
(find the one that works for you)
2.open file
3.execute
*i also tossed the edited script in the pack for anyone who cannot get it to open.
fyi; ark also worked for me to access the file from the op, while my 7z kept erroring out.
ari197 said:
just wondering, would this have any effect for the adb connections ? My ubuntu cannot find the transformer from adb but could mount it just find
Click to expand...
Click to collapse
I can access the TF with adb just fine. Just cd to the android-sdk-linux_x86/platform-tools folder containing adb and run:
Code:
./adb devices
or
Code:
./adb shell
if that folder isn't already configured into your path. Works for me anyway.
I've been looking at this and trying to do it with udev instead, since I want the dynamic creation of the folder in /media. Mounting works great, but removing doesn't. So anyone with knowledge of udev rules is more than welcome to give me some hints. Here's the rules so far:
Code:
See below...
The command run when removing works if I enter it as root in a terminal, so it seems to me that it's either not run when removing or it's failing somehow when run from udev. Edit: I've figured out that it's not run at all. Looking into it...
Also, hint for those who follow the manual instructions you could also get the necessary permissions through Users and Groups instead of editing the groups file. You still have to edit /etc/fuse.conf to allow other though.
These are instructions for automatically mounting and unmounting your pad (not keyboard!). This will create (when plugged in and detected) and remove (when unplugged) the Transformer directory under /media, so that the experience is more in line with other USB devices.
For those of you who already have run the script in the first post, you need to do some cleanup. Edit /etc/fstab and /etc/udev/rules.d/51-android.rules and remove the lines which the script created. Which lines in fstab should be straight forward, and in 51-android.rules look for rows that either have no idVendor set or has it set to 0b05. If unsure, post here FIRST before making changes!
This is the content of /etc/udev/rules.d/51-android.rules:
Code:
ACTION=="add", SUBSYSTEM=="usb", ENV{ID_MODEL}=="MTP", ENV{ID_MODEL_ID}=="4e0f", MODE="0666", RUN+="/bin/bash -c 'mkdir -p /media/Transformer && mtpfs /media/Transformer -o allow_other'"
ACTION=="remove", SUBSYSTEM=="usb", ENV{ID_MODEL}=="MTP", ENV{ID_MODEL_ID}=="4e0f", RUN+="/bin/bash -c 'fusermount -u /media/Transformer && rmdir /media/Transformer'"
If you have other Android devices you may or may not have other lines here too. If so, just add these two lines to the end of the file. My Transformer is bought in Sweden so if things don't work for you, maybe there's another idProduct/ID_MODEL_ID out there? Check with lsusb when your pad is plugged in, the vendor (xxxx) and product (yyyy) ID is [xxxx:yyyy] on the line that says ASUSTek Computer Inc. For my pad, the productID/ID_MODEL_ID is 4e0f.
You need to uncomment allow_other in /etc/fuse.conf and add your user to the fuse group (preferably via Users and Groups) apart from adding the above two lines to your 51-android.rules:
Start Users and Groups, choose your user and press Advanced settings. Under the tab User Privileges you should mark Mount user-space filesystems (FUSE).
Open and edit /etc/fuse.conf (see below on how to use nano). Uncomment user_allow_other in the end (remove the # at the beginning of the line).
After this you should reboot your computer. This will have two effects: The udev rules will be reloaded so the changes apply, and your user will have the necessary privileges granted.
Now you can try to plug in your pad and see if it shows up under /media. Give it some time, it takes a while. (Approx. 30 seconds for me.)
A note on editing files from the terminal window
When editing files from the terminal I always use nano. The command is (if opening a file that requires super user rights):
sudo nano [path-to-file]
The editing is straightforward, works just like any other text editor. When you're finished, press Ctrl+X (Exit) and answer the question with Y (if your system is in english that is) if you want to overwrite the earlier file.
Problems?
If you have ADB activated you could try rmbell's udev rules. This removes the match ID_MODEL == MTP and changes the productID to 4e1f. The productID changes depending on what functions are activated, as discussed in this post by ritterkeks. If you want the pad to be mounted with and without ADB activated, you can add all four rules.
If the udev rules doesn't work, run this command in the terminal and see what happens when you plug the pad in:
udevadm monitor --property --udev
Exit with Ctrl+C. Are the values the same as in the udev rules you're using? If not, change accordingly or deactivate some function which has made the productID change.
"unable to mount location" error
I'm getting an error that reads "Unable to mount location"
Then:
fusermount: failed to open /etc/fuse.conf: Permission denied
fusermount: option allow_other only allowed if 'user_allow_other' is set in /etc/fuse.conf
I'm a monkey in a spaceship when it comes to some of this stuff Any idea what I should do (in layman's terms)?
All help appreciated!
I'm not sure if your problem is from the script in the first post or my instructions. But as the message says you need to edit fuse.conf. Also, you need to be a member of the FUSE group.
Open and edit fuse.conf with this command in a terminal:
sudo nano /etc/fuse.conf
Uncomment (remove the #) user_allow_other in the end, exit with Ctrl+X and save with Y.
Start Users and Groups, choose your user and press Advanced settings. Under the tab User Privileges you should mark Mount user-space filesystems (FUSE). I believe that you need to reboot after this change, otherwise the necessary privileges hasn't kicked in.
Try it and let me know
Notice (4/16/14): I'm no longer here. I've said "goodbye" to AT&T and their locked bootloader schemes. I'm voting with my wallet - I've sold my I337 and switched to T-Mobile. My apologies to the community, but you're now on your own here.
Intro/About/Requirements:
This thread started as a guide for people who wanted to run Ubuntu in a chroot, and then connecting to it locally with a VNC client. This method has been used countless times on other devices, with many thanks to @zacthespack and his his group, LinuxonAndroid. Unfortunately, this method did not work out-of-the-box on my device, so I tweaked things to work with the Galaxy S4 and posted them here in this thread.
However, the most people immediately noticed that with this method the performance is not great, and some applications can't work in a headless environment. With a comment made by zackthespack, I began researching what it would take to get Ubuntu to write directly to the device's framebuffer. After a few months, I not only managed to accomplish this, but also developed a way to get the Galaxy S4 to boot directly into Ubuntu. As far as I have seen, both of these are a "first" for this handset.
All of these methods require root. The VNC Chroot does not require a custom kernel, but the other methods require a custom-built kernel. For the I337 (AT&T) handset, this can pose a problem if you have bootloaders that are MF3+. If you're using MDB/MDL bootloaders still, you shouldn't have a problem with this and you can Loki the custom kernel without issue.
Depending on your ROM and/or Kernel, you may also need a new version of BusyBox installed, even for the VNC method. You'll find a few apps on the Play Store that can do this for you. Beware that some of them are not easily reversible (such as TinyBox), so if you're stuck on MF3 with no way to create/restore a nandroid/system backup, you should be careful.
Click to expand...
Click to collapse
Disclaimers:
Following this guide and/or flashing anything I've provided to your device is your own responsibility. If something breaks, you break your device, or something explodes, I can't be held liable (I'll help correct any situations you may put yourself in, however). I claim no rights to any proprietary software or intellectual property included in this post or the packages contained herein. By using any of this software, you agree to whatever licenses/agreements that the creators may have included with their software. If you use any of this stuff in your own project, please provide credit where credit is due. For example, if you take my u.sh script and adapt it to some new device (i.e. Galaxy S 5), please at least mention where it came from.
Click to expand...
Click to collapse
VNC Chroot Method (original):
This method is loosely based on this thread for the Galaxy S3 and the ubuntu.sh script there. It didn't work for the S4, but I've made several tweaks to it, simplifying it a ton, and otherwise getting it to work perfectly on my S4. I've tried this using my AT&T Galaxy S4 (SGH-I337) on both the MDL build and the MF3 build - both seem to work great.
Instructions:
Download the Ubuntu 13.04 Small v1 image here.
Create a folder on your sdcard labeled "ubuntu" by whatever means you want to.
Extract the ubuntu.img from your downloaded zip into this folder.
Download my version of the ubuntu.sh and place it on the root of your sdcard.
Open the script in a text editor and read through it. Never run a script like this on your android without first knowing what it does - especially when the author is telling you that you need root. If you're happy with it, proceed.
Install an terminal emulator of your choice. I personally used this one, and technically an adb shell will work too (but you'll be tethered to your PC...).
Install a VNC Client of your choice. I personally used this one, but there might be better/faster ones out there.
Open the terminal emulator, and execute the following commands:
Code:
su
sh /sdcard/ubuntu.sh
If you see a bunch of errors and get dumped back at the "[email protected]:/ # " prompt, then something went wrong. Report your errors in this thread. Remember, this requires root (and the "su" command to get there, of course).
You'll be prompted for some setup parameters, which you can save at the end for later. Just answer each question and press Enter after each:
You'll need to provide a new password for the "ubuntu" user. A simple passwords like "ubuntu" works, unless you want some security.
Start VNC server? (y/n) - always choose "y". We need this to interact with the device.
SSH server? Optional. If you use it, you should enable it.
Screen size: Enter whatever you want. I personally used 960x540 (one quarter of the S4's screen size) so that I could actually interact with things using the touch screen.
Save settings as defaults? - You might not want to do this until you have a screen size that works best for you.
Once you see the prompt, "[email protected]:~# " - you're in! You now have Ubuntu running in a chroot. As the on-screen instructions suggest, type "exit" at this prompt to end the chroot and Ubuntu. It is recommended to do this when you are done so that the ubuntu.sh script can clean up after itself (unmounting things, etc.).
Leave your terminal emulator app running! Use your Home button to return home and leave it running.
Open you VNC client and connect with the following settings:
Nickname: (whatever you want)
Password: ubuntu
Address: localhost
Port: 5900 (default)
Username: (leave blank)
Color Format: 24-bit color (you can use lower if you want better performance)
Connect. For the VNC app I used, I had to zoom in to make the screen fit correctly (use pinch-to-zoom, and then use the "+" button on-screen). Also, you can play around with the Input Mode some if you wish.
Enjoy Ubuntu!
As you can see, it's not terribly complicated to get this up and running. Once you have set it up the first time, it's a lot smoother from then on out. The script is designed to allow you to use the external SDCard if you wish. Just use place the ubuntu.img in an "ubuntu" folder on your external SDCard, drop the ubuntu.sh on the root of the external SDCard, and use "sh /mnt/extSdCard/ubuntu.sh" instead (don't forget "su"!).
Click to expand...
Click to collapse
Freedreno Chroot Method (NEW):
This long-winded tutorial will explain how you can setup Xubuntu-desktop in a chroot. Before attempting any of this, you should read through all the steps and be sure you're comfortable performing the steps needed.
This requires roughly 2GB free space on your /data partition - the actual finished install is about 1.4GB, but it will require some extra space while it installs Freedreno and other components. HINT: Keep in mind that your /data partition is shared with your internal sdcard (your internal sdcard gets whatever space is leftover at the end of the /data partition), so you can get an idea how much free space you have by looking at how much space your internal sdcard has available.
Instructions:
Step 0 (option A) - Build Custom Kernel
You will need to install a custom kernel that has specific options enabled in the configuration, along with a few patched files in the source code. This list of changes is based on a delta from the stock I337 MF3 kernel, available at http://opensource.samsung.com/. You should be able to apply these changes to "any" kernel that you can build from source, so this documentation may apply to devices other than the I337.
Kernel Mods:
Required config changes:
Code:
CONFIG_DEVTMPFS=y
# CONFIG_DEVTMPFS_MOUNT is not set
CONFIG_DRM=y
CONFIG_MSM_KGSL_DRM=y
# CONFIG_KGSL_PER_PROCESS_PAGE_TABLE is not set
# CONFIG_MSM_KGSL_PAGE_TABLE_COUNT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_MSM_TRIPLE_BUFFER=y
CONFIG_FB_MSM_DEFAULT_DEPTH_BGRA8888=y
# CONFIG_FB_MSM_DEFAULT_DEPTH_RGBA8888 is not set
Fix for Wi-Fi problems when using MF3 kernel on UCUAMDL bootloaders (i.e. "unadulterated" or "neutered"):
Code:
CONFIG_PROC_AVC=y
Required Patches to kernel source code:
https://github.com/freedreno/kernel-msm/commit/4c0281745f8c85707be88acebb557aca0b8f1dba
https://github.com/freedreno/kernel-msm/commit/228f65d48d4855d903e3b4642179dfa14eedd040
https://github.com/freedreno/kernel-msm/commit/54b510b2e6bccf08fdf3a8ad00a62b27c2f8c1e6
Additional changes required for sudo to work (added 10-25-13 in v4):
Code:
# Samsung Rooting Restriction Feature
#
# CONFIG_SEC_RESTRICT_ROOTING is not set
# CONFIG_SEC_RESTRICT_SETUID is not set
# CONFIG_SEC_RESTRICT_FORK is not set
# CONFIG_SEC_RESTRICT_ROOTING_LOG is not set
Additional changes to the initramfs required for sudo to work (added 10-25-13 in v4):
Edit fstab.qcom, remove the nosuid, part of the line that references userdata.
Step 0 (option B) - Download Custom Kernel Instead
Don't want to compile your own kernel from source? If you have the I337, you can use mine! As mentioned above, this kernel is based on the original MF3 source from Samsung, with the modifications listed above. If you are stuck with MF3+ bootloaders on your I337, you will not be able to install this kernel directly (at the time of this writing). MDB/MDL bootloaders are fine, but you will need to flash loki-doki afterwards (this kernel is not pre-lokified!). This kernel might work with other similar variants (such as the M919), but I haven't tested this on anything except my own I337 daily-driver. YMMV. If you run into issues, you might need to wipe cache/dalvik. This will likely only work with TouchWiz-based ROMs (I have not tried it with AOSP). Here's some downloads for you:
mf3-freedreno-android-boot-v4.zip - CWM/TWRP flashable zip.
- Boots to android, allows Ubuntu with Freedreno to work in a chroot.
- Compiled with the original (slightly modified) MF3 initramfs and "mf3-freedreno-minimum-zImage-v4" (below).
- Includes minimal configuration changes described above, plus the WiFi fix part.
mf3-freedreno-minimum-zImage-v4 - Just the MF3 kernel itself with minimal changes to get the chroot to work.
mf3-freedreno-minimum-config-v4 - Yeah, that's right. I'm providing the .config files I used for all of this.
Step 0.5 - Install the Kernel
Before you can start up the chroot properly, you'll need to have the custom kernel installed. You don't want the "ubuntu-boot" version right now, because you don't have an Ubuntu install to boot to. If you're using my pre-built kernel, first flash mf3-freedreno-android-boot-v4.zip and then flash loki-doki.zip.
Step 1 - Companion Files
Download this file: mf3-freedreno-companions-v4.zip - Non-flashable zip. This includes the script files, which you should promptly read through both u.sh and launch.sh. It is always good practice to read through any script file you get from the internet, making sure it's doing what you would expect it to. Also check out CREDITS.txt, which includes information about the included upstart-dummy.tar.gz and start-stop-daemon files.
Extract the companion files .zip and place its contents on the root of your internal sdcard (/sdcard/). Don't extract the contents of upstart-dummy.tar.gz. This is your $src directory. You can change this if you wish (see script for details).
Step 2 - Install/Configure Ubuntu
Install an terminal emulator of your choice. I personally used this one, and technically an adb shell will work too (but you'll be tethered to your PC...). At the console/shell, type the following two commands:
Code:
su
sh /sdcard/u.sh bash
The script will download Ubuntu Core and install Freedreno, upstart-dummy, and lubuntu-desktop. Total download size will be around 425MB. Total install time will vary, but count on it taking at least 45 minutes to install and configure everything. At the very end, you'll be prompted to enter a password for the new user "ubuntu".
Step 2.5 - Exit ubuntu
When you see the message "Type 'exit' (without quotes) to leave ubuntu," the install is complete. You'll notice that your prompt changed to "[email protected]". This is the easiest way to confirm that you're actually inside the ubuntu chroot. Type exit and hit Enter to get back to android.
Step 3 - Fire it up!
From now on, you can start Ubuntu using u.sh in any of these three ways:
sh /sdcard/u.sh - This will make initial prep, STOP android (black screen), launch the chroot, install/configure if needed, and will execute "service lightdm start". This will give you the greeter and you can login as "ubuntu". If the lightdm service stops for whatever reason (see info about the home button below), the script will continue by exiting the chroot and rebooting your device.
[*]sh /sdcard/u.sh bash - Same as above, except that it will not stop android, not startx (will give bash shell instead), and will not reboot your phone when you exit the shell.
[*]sh /sdcard/u.sh destroy - This will do exactly as it sounds - destroy your ubuntu installation. This will unmount your /sdcard from ubuntu (if still mounted somehow) and then recursively delete your ubuntu installation. If you change the source or destination directories in the main script, you should be careful deleting things.
NOTE: Remember to ALWAYS run any these from a root shell, whether via terminal emulator, via adb shell, or using SManager (or similar).
Step 4 - Note the Home Button and Touchpad
Take note that any time you have X running via lightdm, the hardware Home button will kill the X server. This is intentional, and will exit the chroot and reboot your phone. You'll also notice that currently, the touchscreen acts like a giant touchpad (like on a laptop). Use two fingers to right-click or scroll. Direct touchscreen input is not available at this time due to a segmentation fault that evdev causes when used on this device in a chroot.
Step 5 - (optional) Make Changes and Do it All Over Again
Customize the crap out of it! Edit my u.sh, launch.sh or xorg.conf and have fun. If you find great improvements, please post them in this thread! In future revisions, I might include them. Things should be well documented within the scripts. You might even change the bit at the end of launch.sh that starts "service lightdm start&" instead of "startx" - this would give you the greeter and let you login as the user "ubuntu" if you want. Also note that those three files are the only ones that must remain in your $src directory if you wish to continue to run this as a chroot. By the way, booting directly to Ubuntu after it is installed does not require any of the companion files anymore.
Click to expand...
Click to collapse
Native Boot Method (NEW):
This part of the tutorial is for those who wish to take things a step further and boot your device directly into Xubuntu-desktop. This will require that you setup the Freedreno chroot properly, and then you'll be installing a new boot.img. While this doesn't replace your /system partition, you won't be able to boot directly into Android while you have this boot.img installed.
Instructions:
Step 1 - Install Ubuntu
Basically, you need to perform all the steps for the Freedreno Chroot method, and get that up and running first. All you're doing here is swapping out your kernel.
Step 2 (option A) - Build Custom Kernel
You'll need all of the kernel customizations included in the freedreno chroot method, plus these listed below:
NOTE: You will need some proprietary blobs, which can be found on your device in the /etc/firmware directory.
Config changes to enable booting directly into Ubuntu (beyond replacing the initramfs...):
Code:
CONFIG_EXTRA_FIRMWARE_="audience-es325-fw.bin a300_pm4.fw a300_pfp.fw vidc_1080p.fw"
CONFIG_CMDLINE="console=tty0 fbcon=vc:0-3"
# CONFIG_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_CMDLINE_EXTEND=y
# CONFIG_CMDLINE_FORCE is not set
Optional config changes to enable the framebuffer console when booting directly into Ubuntu - useful for debugging.
Code:
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
NOTE: You will need to grab some .ko files that are created, which must be loaded in the following order:
Code:
insmod /ko/font.ko
insmod /ko/softcursor.ko
insmod /ko/bitblit.ko
insmod /ko/fbcon.ko
I recommend that you include these four lines into the init script that is included in the ubuntu ramdisk. These can go pretty much anywhere after the ". /scripts/functions" part, but before it calls out to run-init. Also, don't forget to drop those .ko files into a new /ko directory in the initramfs. If you want to load these with modprobe, I'll leave that up to you (good luck).
Replace the entire ramdisk/initramfs:
At this time, I'm not going to provide instructions on how to do this. You'll need this mako boot.img straight from Ubuntu, repacked with the zImage created here. For what it's worth, the re-pack tool I'm using includes --cmdline 'androidboot.hardware=qcom user_debug=31 zcache', but I'm not sure if that's needed (especially considering our kernel seems to use qcache?). Anyways, good luck.
Step 2 (option B) - Download Custom Kernel Instead
Again, if you don't want to compile your own kernel from source, you can download mine and use it. The same warnings and restrictions apply as they do in Step 0 (option B) of the Freedreno Chroot method. And here's your downloads:
mf3-freedreno-ubuntu-boot-v4.zip - CWM/TWRP flashable zip.
- Boots to Ubuntu directly, but only if your Ubuntu install is located at /data/ubuntu (Default).
- Compiled with the original MF3 initramfs and "mf3-freedreno-everything-zImage-v4" (below).
- Includes all configuration changes described above.
mf3-freedreno-everything-zImage-v4 - Just the MF3 kernel itself with all changes for both chroot and direct booting to Ubuntu.
mf3-freedreno-everything-config-v4 - Yet again, I'm providing my complete .config file for this.
Step 3 - Install the Kernel
Here's the easy part. Flash your completed boot.img, flash loki-doki, and reboot. If you're using my pre-built kernel, first flash mf3-freedreno-ubuntu-boot-v4.zip and then flash loki-doki.zip.
Click to expand...
Click to collapse
Flashable Zip Method (NEWEST):
It's finally finished: a flashable .zip that you can use to dump a pre-built rootfs onto your data partition. This will still require that you flash one of the two custom kernels (whether for chroot or native booting), but it will allow you to skip the whole build/install process.
ubuntu-install-v4.zip - CWM/TWRP flashable .zip. Requires approx 2GB free space on your data partition during install, and the final install size is approximately 1.3GB (may want more free space to add your own programs/etc.). Output folder is /data/ubuntu. This can be changed in u.sh, but heed the warnings within!
Instructions:
Instructions for Chroot-style Ubuntu:
Download the "companions" .zip and extract its contents to the root of /sdcard.
Download the "ubuntu-install" .zip to your internal or external SDCard.
Download the "mf3-freedreno-android-boot" .zip to your internal or external SDCard.
Make a nandroid backup of your phone, and store it on an external SDCard or your computer. Always a good idea to have this.
Install the "ubuntu-install" and "mf3-freedreno-android-boot" .zip files, followed by loki-doki.zip if you need that for your device (e.g. I337).
Restart and resume with Step3 of the Freedreno Chroot Method.
Instructions for Native Boot Ubuntu:
Download the "ubuntu-install" .zip to your internal or external SDCard.
Download the "mf3-freedreno-ubuntu-boot" .zip to your internal or external SDCard.
Install the "ubuntu-install" and "mf3-freedreno-ubuntu-boot" .zip files, followed by loki-doki.zip if you need that for your device (e.g. I337).
Restart and let it start into Ubuntu!
NOTE: The username is "ubuntu" and the password is also "ubuntu" - it is highly recommended that you change this ASAP.
Click to expand...
Click to collapse
Known Issues/Bugs:
Below is the list of known issues that I can think of, from the top of my head. This will probably be updated later as everyone points stuff out. Some issues only apply to some of the methods, so the applicable methods are listed in parenthesis after each.
Sound has not been tested (freedreno/native)
3D graphics or OpenGL support has not been tested (all)
Some applications don't work in a headless environment (vnc)
Some applications don't like to run as root, such as chromium (freedreno) lightdm is working in companions-v3, so no need to login as root anymore
Onboard is not working (freedreno/native) fixed in companions-v3
sudo does not work (all) fixed in kernel-v4 for freedreno/native, but problem remains for (vnc) if you are not using a custom kernel
A few kernel Oops's (native)
Shutdown menu doesn't always work (freedreno/native) fixed partly in companions-v4 - proper locale settings seem to allow the shutdown menu to work once you are logged in
Performance issues due to VNC connection (vnc)
No 3G/WiFi/network connection that I'm aware of... (native)
No control over 3G/WiFi/network/bluetooth yet (all)
Xorg's normal touchscreen driver evdev causes segmentation faults (freedreno/native)
Working on a possibly trying to get fbdev to work natively without Freedreno for simplicity (freedreno/native)
Anything you'd normally expect from a phone does not exist (freedreno/native)
Screen rotation (with or without accelerometer) doesn't work yet (freedreno/native)
HDMI/MHL output remains untested at this time. I got it to briefly work once, but I need to revisit this. (freedreno/native)
Many more to come, I'm sure...
Click to expand...
Click to collapse
To-Do:
Add mirrors to the download links.
Add a CWM/TWRP-flashable .zip that just dumps a clean Ubuntu install onto your data partition. This should be easy enough. completed!
Fix some of the bugs above.
Simplify the launch.sh and xorg.conf files. The u.sh script seems pretty solid.
Develop a method that works with only fbdev. This method might eliminate the possibility of 3D acceleration, but should enable screen rotation and other nifty things.
Possibly look into getting kexec (or similar) to work on the Galaxy S4 to offer a dual-boot option. Low priority at the moment, because flashing a kernel back and forth is pretty easy stuff.
Get Ubuntu Touch to work. This would eliminate a lot of bugs. I mostly need to just buckle-down and build CM10.1 from source, and then slowly visit each step of the Ubuntu Touch boot process.... Ugh.
Rebuild Freedreno to try to get Mesa/Gallium3D working properly. I'm probably going to need a lot of help from Rob Clark on this one!
More to come...
Click to expand...
Click to collapse
Revision History:
[11-13] mf3-freedreno-companions-v2.zip - Updated launch.sh: added some error checking and fixed the Freedreno build process.
[11-15] mf3-freedreno-companions-v3.zip - Updated launch.sh to include onboard and English language. Removed florence and xvkbd. Removed .keyb script. Added sudo. Simplified upstart-dummy, and included new upstart-dummy.tar.gz. Prepped for new flashable .zip method.
[11-26] mf3-freedreno-companions-v4.zip - Updated launch.sh: included fix for onboard so that it should work anytime lightdm is launched, added some bits for sudo to work, and home button now kills lightdm (not just the Xsession); Updated u.sh: Added check for root, added notes about sudo and nosuid.
[11-26] mf3-freedreno-android-boot-v4.zip & mf3-freedreno-ubuntu-boot-v4.zip - Finally fixed sudo! See kernel mods sections for details.
[11-26] ubuntu-install-v4.zip - rebuilt with new companions.
Click to expand...
Click to collapse
Aou said:
Check out this app: SManager (Script Manager). It makes running the ubuntu.sh or u.sh a whole lot easier, plus you can send it into the background (vnc method only). Just remember to jump back into SManager later, use the Menu Key and open the console to be able to kill the ubuntu.sh. You can also add "bash" as an additional argument (freedreno method only). This seems to be an effective replacement for the Terminal Emulator. Don't forget to choose the "su" option to run either script as root.
Click to expand...
Click to collapse
I have literally spent hundreds of hours working on this project, and many more hours documenting it thoroughly - just so that I could share it with all of you. If you found this guide, custom kernel or scripts to be beneficial, please hit the THANKS button on this post.
This mostly works, but I think I may have made an error. I see it starting the sshd, but not VNC server. I can call vncserver, but when launching the vnc client app I just get stuck at "Establishing Handshake" until it times out. This differs from when I don't call vncserver, where I get immediately connection refused.
I'm going to redownload the image and start from scratch, but the image isn't very friendly when I'm trying to figure out how to rerun the initial configuration script...
On my S4 running OTA-MF3 with root, this didn't work for me until i used Busybox Installer from the market. Tried internal and external without it, neither worked. Only thing that looked like an error after that was
Code:
chown: cannot access '/external-sd/': no such file or directory
but this only showed the first time I ran it. Opened VNC connection just fine from my computer to the phone, and though there was slight graphics glitching (orange and red boxes on desktop) it worked just fine and they didn't interfere. Thanks for this!
Tsaukpaetra said:
This mostly works, but I think I may have made an error. I see it starting the sshd, but not VNC server. I can call vncserver, but when launching the vnc client app I just get stuck at "Establishing Handshake" until it times out. This differs from when I don't call vncserver, where I get immediately connection refused.
I'm going to redownload the image and start from scratch, but the image isn't very friendly when I'm trying to figure out how to rerun the initial configuration script...
Click to expand...
Click to collapse
It's not, I agree. I found that the easiest way to clear the configuration and start anew is to do the following from the "[email protected]" prompt (that is, within ubuntu):
Code:
rm /root/DONOTDELETE.txt
rm /root/cfg/linux.config
DeadlySin9 said:
On my S4 running OTA-MF3 with root, this didn't work for me until i used Busybox Installer from the market. Tried internal and external without it, neither worked. Only thing that looked like an error after that was
Code:
chown: cannot access '/external-sd/': no such file or directory
but this only showed the first time I ran it. Opened VNC connection just fine from my computer to the phone, and though there was slight graphics glitching (orange and red boxes on desktop) it worked just fine and they didn't interfere. Thanks for this!
Click to expand...
Click to collapse
Interesting. I looked through the image's init.sh, and found something that's relatively new (wasn't in beta):
Code:
# Fix for sdcard read/write permissions by Barry flanagan
chown ubuntu /external-sd/
As far as I can tell, that message is harmless. It's only included in the initial configuration, as it's in the section:
Code:
if [ ! -f /root/DONOTDELETE.txt ]
As for the need to download/install the BusyBox installer, that's not surprising at all. I've had so much trouble BusyBox ever since I switched to MF3. I might include this as an extra step in the OP - thank you.
You kidding right...does this really work? To cool, thanks Aou. Great work.
TheAxman said:
You kidding right...does this really work? To cool, thanks Aou. Great work.
Click to expand...
Click to collapse
Yessir, it does indeed work! The S4 handles it very nicely with the extra RAM & CPU it has to spare, so the only limiting factor is VNC. If someone could devise a way to get Ubuntu to draw directly on the screen from within that Chroot, that would be perfect. I don't think it's really possible by design, but this might be the closest we get to running native linux on the I337 until we see some unlocked bootloaders.
Thanks
Aou said:
Yessir, it does indeed work! The S4 handles it very nicely with the extra RAM & CPU it has to spare, so the only limiting factor is VNC. If someone could devise a way to get Ubuntu to draw directly on the screen from within that Chroot, that would be perfect. I don't think it's really possible by design, but this might be the closest we get to running native linux on the I337 until we see some unlocked bootloaders.
Thanks
Click to expand...
Click to collapse
In fact I am currently working on getting xorg to write to androids frame buffer which will mean no more vnc
Sent from my Nexus 4 using xda premium
zacthespack said:
In fact I am currently working on getting xorg to write to androids frame buffer which will mean no more vnc
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
You, sir, are the man. thank you so much for working on this! I threw $10 at you to help fund the skittles/cheetos/carrots/beer/pizza/whatever it takes to help you along.
Added a couple things to the OP. Looks like pure-stock roms will indeed need BusyBox installed, by some means or another. Also, found SManager, which makes executing the ubuntu.sh script much, much easier.
The second script that allows me to launch ubuntu, but the first that allows me to get a real X server on my vnc. Thank you so much !
PS: Why am I unable to install wine ?
"Package wine is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source"
This is working pretty good, slow though, do I have it setup right, or did I miss something?
TheAxman said:
This is working pretty good, slow though, do I have it setup right, or did I miss something?
Click to expand...
Click to collapse
I have found it to run a bit slow, and with regular crashing of GUI programs too. Is it just slow or unusable? You can always try closing other apps besides terminal and VNC, or try to VNC from a computer even.
tboss1995 said:
The second script that allows me to launch ubuntu, but the first that allows me to get a real X server on my vnc. Thank you so much !
PS: Why am I unable to install wine ?
"Package wine is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source"
Click to expand...
Click to collapse
Looks like you're not the only one. Check out this thread on the LinuxOnAndroid site:
http://forum.linuxonandroid.org/index.php?topic=268.0
TheAxman said:
This is working pretty good, slow though, do I have it setup right, or did I miss something?
Click to expand...
Click to collapse
DeadlySin9 said:
I have found it to run a bit slow, and with regular crashing of GUI programs too. Is it just slow or unusable? You can always try closing other apps besides terminal and VNC, or try to VNC from a computer even.
Click to expand...
Click to collapse
Most of the slowness comes from interacting with it via VNC, it would seem. Hard to compare to anything else, considering VNC is all we've got at the moment. I wonder if @zacthespack can shed some light on this. As he mentioned before, he's working on getting it to draw directly to the Android screen. I'm certainly not going to ask for any status updates, but I'm wondering if he can confirm that we'd see a speed increase without VNC...
EDIT: Also, as I use it more, I am noticing the app crashes too (such as Chromium). Could just be something in the 13.04 image, but also could be because we're running this all on ARM architecture.
Aou said:
Looks like you're not the only one. Check out this thread on the LinuxOnAndroid site:
http://forum.linuxonandroid.org/index.php?topic=268.0
Most of the slowness comes from interacting with it via VNC, it would seem. Hard to compare to anything else, considering VNC is all we've got at the moment. I wonder if @zacthespack can shed some light on this. As he mentioned before, he's working on getting it to draw directly to the Android screen. I'm certainly not going to ask for any status updates, but I'm wondering if he can confirm that we'd see a speed increase without VNC...
Click to expand...
Click to collapse
RE installing WINE, sure you can install the ARM verson but Wine is not a emulator (infact WINE stands for Wine Is Not a Emulator) so you can only run ARM compiled windows software.
Yest there is a good speed increase, as with VNC xorg writes to the vnc server and passes it to the vnc client to then render on the screen.
With the new method xorg just writes to Androids frame buffer, no inbetween man.
And it can get even faster once we have graphics accelerations although not all chip sets will get that.
zacthespack said:
RE installing WINE, sure you can install the ARM verson but Wine is not a emulator (infact WINE stands for Wine Is Not a Emulator) so you can only run ARM compiled windows software.
Click to expand...
Click to collapse
Good point, forgot about that. It's really just a big package of Windows dependencies, responding to API calls, etc. The software that Wine runs is still sending stuff to/from the processor directly, therefore it would have to be compiled for ARM.
I wonder what Windows8 programs are available that are compiled for ARM (because of the Microsoft Surface and all...).
Aou said:
Good point, forgot about that. It's really just a big package of Windows dependencies, responding to API calls, etc. The software that Wine runs is still sending stuff to/from the processor directly, therefore it would have to be compiled for ARM.
I wonder what Windows8 programs are available that are compiled for ARM (because of the Microsoft Surface and all...).
Click to expand...
Click to collapse
There's plenty or ARM software within the built in app store, but I'm not sure where they install to or how one would go about extracting them. I have it on desktop and it shows what processors it runs on. Can't wait for the straight to screen function though
Also, I'm going to see if a different image is more stable. Chromium was the most obvious crashing for me and others generally crashed.
DeadlySin9 said:
There's plenty or ARM software within the built in app store, but I'm not sure where they install to or how one would go about extracting them. I have it on desktop and it shows what processors it runs on. Can't wait for the straight to screen function though
Also, I'm going to see if a different image is more stable. Chromium was the most obvious crashing for me and others generally crashed.
Click to expand...
Click to collapse
I noticed that with 12.04, it doesn't seem to connect to Xorg or something, because when you use VNC, it only shows a grey screen with a cross cursor. Same for both "Lite" and "Full" packages. Haven't tried older (10.x) packages of Ubuntu.
The other Linux images should work just fine. Optionally, you can edit the ubuntu.sh script to be more appropriate, but it should theoretically work the same (unless the init.sh is located elsewhere inside the image...).
I tried the Ubuntu 10 image and the Debian image but ubuntu didn't run vnc (vncserver not found or something) and debian kept saying I didn't have permissions.
It appears chromium is incredibly unstable on this image, so I've uninstalled it.
I'm currently working on trying to get Minecraft to work, but ever since 1.6.2 and this new launcher, it's incredibly difficult to modify the client files and such. Something is going wrong with liblwjgl.so. I can get the launcher to work correctly, but when it goes to load the game, it can't find liblwjgl.so and says that it might be because of 32bit vs ARM. I did get lwjgl installed correctly, and pulled the ARM version of the .so and stuck it in [what I believe was] the right .jar file, but it still has the error.
I'll keep you all posted. If I can get this to work, and if zacthespack can get xorg to draw on the android screen, ... :good:
EDIT:
Found out that every time the launcher runs minecraft, it downloads several libraries and other crap to run the game, to keep itself current and to support multiple versions, yada, yada. Unfortunately, this means that it downloads https://s3.amazonaws.com/Minecraft..../2.9.0/lwjgl-platform-2.9.0-natives-linux.jar every time you click Play, and overwrites any custom one you might have (i.e. one with ARM libraries inside). I tried revoking write access to the file, but then the launcher aborts the launch because it can't overwrite the file.
Any suggestions?
EDIT #2:
Well, the easy solution was to modify the file, run the launcher, disconnect mobile data temporarily, and then launch the game ("couldn't connect to server .... have local copy of file .... assuming it's good...."). No more errors about that stupid library file. However, the game immediately crashes now with an error report. Investigating this now. PROGRESS!
Problem
I'm aware I may need to modify the script in order to accommodate my setup, but I figured I'd post here first before changing anything in case someone else had a similar problem and came up with the solution.
I followed all the instructions, except I want to boot from an external USB stick (mounted using StickMount).
I reviewed the script, dropped it on the root of the USB stick, and copied the unzipped image to a folder named ubuntu.
Here is the output when I run the script:
Making mount points and mounting to them...
mount: mounting /dev/loop20 on /data/local/ubmnt failed: Operation not supported
mount: mounting devpts on /data/local/ubmnt/dev/pts failed: No such file or directory
mount: mounting proc on /data/local/ubmnt/proc failed: No such file or directory
mount: mounting sysfs on /data/local/ubmnt/sys failed: No such file or directory
Connecting to /sdcard...
mount: mounting /sdcard on /data/local/ubmnt/sdcard failed: No such file or directory
Putting in some settings...
net.ipv4.ip_forward = 1
/sdcard/usbStorage/sda1/ubuntu.sh[19]: can't create /data/local/ubmnt/etc/resolv.conf: No such file or directory
/sdcard/usbStorage/sda1/ubuntu.sh[20]: can't create /data/local/ubmnt/etc/resolv.conf: No such file or directory
/sdcard/usbStorage/sda1/ubuntu.sh[21]: can't create /data/local/ubmnt/etc/hosts: No such file or directory
ubuntu is configured with SSH and VNC servers that can be accessed from the IP:
(You will see an error about wlan0 if your WiFi is disabled. Safe to ignore.)
----------------- OKAY, starting Ubuntu! -----------------
chroot: can't execute '/root/init.sh': No such file or directory
----------------- Ubuntu has exited! -----------------
Cleaning up - unmounting everything and removing what we made...
umount: can't forcibly umount /data/local/ubmnt/dev/pts: No such file or directory
umount: can't forcibly umount /data/local/ubmnt/sys: No such file or directory
umount: can't forcibly umount /data/local/ubmnt/proc: No such file or directory
umount: can't forcibly umount /data/local/ubmnt/sdcard: No such file or directory
umount: can't forcibly umount /data/local/ubmnt: Invalid argument
Welcome back to your android.
Click to expand...
Click to collapse
I am running as root, BusyBox free has been installed. My terminal app has been granted root privileges. The path to the USB stick is sdcard/usbStorage/sda1.
Any help/guidance would be greatly appreciated! :fingers-crossed:
Yep, you read that correctly. I have optware, ssh, samba, transmission, and flexget working on my Minix X5 Mini. This should work for any rooted device which has an adb connection enabled. This will work on the original ROM. In fact, I use the stock ROM. For those not using a Minix device this should work on any ARM device. Sorry but all the binaries are built on ARM.
JUST AS EVERY OTHER DEVELOPER: I AM NOT RESPONSIBLE IF YOU BRICK YOUR DEVICE! MAKE A BACKUP!
Requirements:
Linux box with adb (don't ask me about windows, I don't support bad habits)
clockworkmod (for a backup)
root
internet connection
Process:
Make a backup of your ROM!
Download files (gitHub)
You have two options here:
Download the zip via https://github.com/erichlf/AndroidSeedBox/archive/master.zip and unzip it.
Clone the repo using git via 'git clone [email protected]:erichlf/AndroidSeedBox.git'
Make script executable
chmod +x optware-etc.sh
Obtain adb connection to device (covered in another thread)
Gain root access on local machine (adb seemed to require this for things to work)
sudo su
Run script and follow directions
./optware-etc.sh
Use SManager to run /opt/home/root/sysinit at every restart.
Notes:
The script can be modified to change the various programs that I install. You could exchange transmission for deluge for example.
Transmission can be accessed from the minix through localhost:9091 or from some other machine using your ip-address and the port 9091. If that doesn't work you should edit the config file located at /opt/home/root/.config/transmission-daemon/settings.json
username: root
password: you provided this in the install script
Without SManager nothing will start automatically. However, if you have a ROM which has init.d support you can move the scripts in /opt/etc/init.d to /etc/init.d I would suggest maybe linking the two instead of just moving the scripts or possibly adding a script to /etc/init.d which runs the items in /opt/etc/init.d The reason is because when installing things using ipkg the startup scripts will be placed in /opt/etc/init.d and not /etc/init.d However, it is extremely important that optware is started, and this is partly what sysinit accomplishes.
To list available packages
ipkg list
To install a new package use the command
ipkg install <new package>
To remove a package use the command
ipkg remove <package to remove>
cron is weird and I couldn't get it to work like it should, but I got it to work
While on the Android device (ssh or terminal emulator)
Create a .crond file in the home directory of your device (/opt/home/root/) with some schedule in it. Remember to leave a blank line at the end of the file.
Tell cron about the .crond file
crontab -u root /opt/home/root/.crond
Make sure cron sees the cron file
crontab -l
If you want to edit your cronfile use a text editor and edit the file directly and then tell cron about the file again.
Many things are installed in what seem like strange places, so use
which <binary you are looking for>
Feel free to help develop the code. I think what would be best is an update.zip or a CWM flashable zip. Right now I don't know how to do this, but once I get more time I will look into it. So, any help on this front is welcomed.
Enjoy!
I really wish you would have kept the repo up. It seems kind of pointless to go through all that trouble just to delete the repo and leave people wondering what you did.
I have been busy and didn't update this particular post, since there had been no activity on it.
git clone [email protected]:erichlf/androidseedbox.git
https://bitbucket.org/erichlf/androidseedbox/get/master.zip
Sorry, I didn't need to be rude. I was just excited to find this and then sad when it was gone. Thanks for pointing me in the right direction!