Flashed wrong kernel - LeEco Le 1S Questions & Answers

I have flashed wrong kernel in the leeco le 1s device so now it is boot loop restarting again and again...now how to flash stock rom..? Sp flash tools showing auth file error...

Recently i flashed psycho kernel which was i saw in kernal auditor - downloads " do not try this kernal " flashed on RR nogat rom
Everything is fine but wifi and Bluetooth not working , mac address is 02:00:00:00:00
I tried rom change but not succed ,
I found there is no persist folder in root ?
I cant flash stock rom via sp tool cuz my pc also couldn't start due to ram problem.
Somebody copy persist folder and zip it and send it to me please. Comment for contact.

I found a solution somewhere, no wifi or any hardware problem , check in (dev/block/platform/mtk-msdc.0/11230000.MSDC0/by-name/ ) there persist file (which is partition file where wifi , bt and other hw related info stored ) is missing or not .
If yes then download stock rom, unzip and
Mount persist.img in that folder vua twrp terminal ???

you can download the Stock ROM in your phone and flash it

Related

[rom][4.2.1]701hd[fazhdv3][21/06/13]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome
FazHDv3 is the Samsung S4 Based Custom Rom
This ROM is ported from SamHDv3 for Customizations and Smoothness of 701HD
Special Thanks to abhishek for his invaluable contribution.
FAZHD ROM Features
Same as http://forum.xda-developers.com/showthread.php?t=2201122
How To Flash :
( You Can Take CMW Backup for Revert back to your old system )
Flashing procedure is different Don't Skip
1) Download Fazhd rom and bin files
Extract them both.copy allfiles in bin files to rom's system/bin
copy updater-script and replace with updater-script in here .META-INF/com/google/android/here
make a zip of rom
2) Put into External SD Card
3) Go To CMW Recovery
4) Wipe Data/Factory Reset And Wipe Partition
5) From Advance Menu Do Dalvik Catch Clear
6) Go in Mount And Storage select FORMAT SYSTEM
7) Select Intall From SD and Select File And Click YES
8) Select FazHDV3.zip And Select YES
9) Reboot Your System
10) Enjoy
Downloads
Rom http://d-h.st/NVu
bin files http://d-h.st/BBf
updater-script http://www.mediafire.com/?mv7fksxvttm4c41
Hi Buddy, Can you port the Ultimate 2.1 Rom by Back37 of Xolo Q800/GiONEE GN708W to Lava IRIS 504Q??
It's SUPER AWESOME ROM!! GIONEE FIRMWARE ROCKS!
Here's the link.
https://disk.yandex.com/public/?hash=MliKIOx5Mpen0T9iZd1uQmMX6bJee7QjjfPLQtVMXoU=
Thanks lot!
NHS2008 said:
Hi Buddy, Can you port the Ultimate 2.1 Rom by Back37 of Xolo Q800/GiONEE GN708W to Lava IRIS 504Q??
It's SUPER AWESOME ROM!! GIONEE FIRMWARE ROCKS!
Here's the link.
https://disk.yandex.com/public/?hash=MliKIOx5Mpen0T9iZd1uQmMX6bJee7QjjfPLQtVMXoU=
Thanks lot!
Click to expand...
Click to collapse
I ported lewa os to lava iris 504q..
Will upload soon
Sent from my iris504Q using xda premium
Thanks I would be very greatful if you could port that rom. Its too goood
Thanks a Lot.... can you try to port Canva4HD from same dev...
fandroid7 said:
Welcome
FazHDv3 is the Samsung S4 Based Custom Rom
This ROM is ported from SamHDv3 for Customizations and Smoothness of 701HD
Special Thanks to abhishek for his invaluable contribution.
FAZHD ROM Features
Same as http://forum.xda-developers.com/showthread.php?t=2201122
How To Flash :
( You Can Take CMW Backup for Revert back to your old system )
Flashing procedure is different Don't Skip
1) Download Fazhd rom and bin files
Extract them both.copy allfiles in bin files to rom's system/bin
copy updater-script and replace with updater-script in here .META-INF/com/google/android/here
make a zip of rom
2) Put into External SD Card
3) Go To CMW Recovery
4) Wipe Data/Factory Reset And Wipe Partition
5) From Advance Menu Do Dalvik Catch Clear
6) Go in Mount And Storage select FORMAT SYSTEM
7) Select Intall From SD and Select File And Click YES
8) Select FazHDV3.zip And Select YES
9) Reboot Your System
10) Enjoy
Downloads
Rom http://d-h.st/NVu
bin files http://d-h.st/BBf
updater-script http://www.mediafire.com/?mv7fksxvttm4c41
Click to expand...
Click to collapse
Thanks a Lot.... can you try to port Canva4HD from same dev... great abhishek.....
and can it be possible if you put bin files... in the same.. .zip.. and do we need to sign the zip after copy - paste of bin files and updater script...
port MTK6589 roms easy
defy403 said:
Thanks a Lot.... can you try to port Canva4HD from same dev... great abhishek.....
and can it be possible if you put bin files... in the same.. .zip.. and do we need to sign the zip after copy - paste of bin files and updater script...
Click to expand...
Click to collapse
Download MTK firmware adaptor forum.china-iphone.ru/post862552.html
you should install adb and root access to phone and your stock boot.img
1. download Rom you need to port
2. open mtk firware Adaptor
3. select profile as mtk6589
4.get files from your phone.
5. make your system files as system.zip (will get from backup of your rom)
get files from your system.zip
the tool will look like not responding but its copying rom files
6. get files from port rom
7. tick automated boot.img and make modded boot.img from stock boot.img
8. make adapted rom (port rom for your device)
it will automatically sign your rom
you can edit build.prop before creating rom
copy to phone and flash via cwm
updater-script will be automatically created.
test the rom and tell me if you have any problem like
dark camera. audio not wotking
will tell you how to fix it
stuck on boot loop....
fandroid7 said:
Download MTK firmware adaptor forum.china-iphone.ru/post862552.html
you should install adb and root access to phone and your stock boot.img
1. download Rom you need to port
2. open mtk firware Adaptor
3. select profile as mtk6589
4.get files from your phone.
5. make your system files as system.zip (will get from backup of your rom)
get files from your system.zip
the tool will look like not responding but its copying rom files
6. get files from port rom
7. tick automated boot.img and make modded boot.img from stock boot.img
8. make adapted rom (port rom for your device)
it will automatically sign your rom
you can edit build.prop before creating rom
copy to phone and flash via cwm
updater-script will be automatically created.
test the rom and tell me if you have any problem like
dark camera. audio not wotking
will tell you how to fix it
Click to expand...
Click to collapse
stuck on boot loop.... what to do now......!!!
defy403 said:
stuck on boot loop.... what to do now......!!!
Click to expand...
Click to collapse
its becouse of boot.img
just tap modifying boot.img button two or more times after selecting boot.img
its because of bad repacking of boot.img
if you use android kitchen
then make portrom.zip working folder and replace your stock boot.img
unpack boot.img by going to advanced and unpack repack boot.img unpack pressing w
rename boot extracted to stock boot
change boot.img with port roms boot.img
unpack port boot.img
copy zimage or zboot (i forgot real name) zxxxxxxx from stock boot to boot exracted
repack boot.img and make zip using 7zip of new boot.img+meta+system and flash rom it will boot
need help badly....
fandroid7 said:
its becouse of boot.img
just tap modifying boot.img button two or more times after selecting boot.img
its because of bad repacking of boot.img
if you use android kitchen
then make portrom.zip working folder and replace your stock boot.img
unpack boot.img by going to advanced and unpack repack boot.img unpack pressing w
rename boot extracted to stock boot
change boot.img with port roms boot.img
unpack port boot.img
copy zimage or zboot (i forgot real name) zxxxxxxx from stock boot to boot exracted
repack boot.img and make zip using 7zip of new boot.img+meta+system and flash rom it will boot
Click to expand...
Click to collapse
hi sir,
how to boot into recovery... i am getting 8038 in sp flash tool... have cwm backup...... device is not detected on mtk... and getting 8038 error in sp flash tool... what to do... plz plz help...
defy403 said:
hi sir,
how to boot into recovery... i am getting 8038 in sp flash tool... have cwm backup...... device is not detected on mtk... and getting 8038 error in sp flash tool... what to do... plz plz help...
Click to expand...
Click to collapse
are you using cwm
download mobile uncle tools for mediatech and select reboot to recovery
resolved... phone is back to life....
defy403 said:
hi sir,
how to boot into recovery... i am getting 8038 in sp flash tool... have cwm backup...... device is not detected on mtk... and getting 8038 error in sp flash tool... what to do... plz plz help...
Click to expand...
Click to collapse
done... phone back to life... selected... firmware upgrade and did... flash factory rom backup.... and it's again alive...
with CWM & SU along with mobile uncle....
i think from next time... whenever i will try to do experiments.... will... make sure... i have backup ready..
so doing a new backup with CWM and SU... right away... also doing IMEI restore as it went to null.....
---------- Post added at 08:03 AM ---------- Previous post was at 07:54 AM ----------
fandroid7 said:
are you using cwm
download mobile uncle tools for mediatech and select reboot to recovery
Click to expand...
Click to collapse
HI....
i was stuck on boot loop... so not getting into recovery... even mtk was not detecting my phone... so i flashed... factory rom.. backup.. via firmware upgrade in sp flash tool... 3.13.... and did a factory reset and i am back in business,,,, still thanks for help...
you are from India... i am from mumbai.... can i just replace.... boot.img in custom rom with my phone's boot.img.... and do same for LK.bin... i.e. uboot.img... will that work....
---------- Post added at 09:01 AM ---------- Previous post was at 08:03 AM ----------
defy403 said:
done... phone back to life... selected... firmware upgrade and did... flash factory rom backup.... and it's again alive...
with CWM & SU along with mobile uncle....
i think from next time... whenever i will try to do experiments.... will... make sure... i have backup ready..
so doing a new backup with CWM and SU... right away... also doing IMEI restore as it went to null.....
---------- Post added at 08:03 AM ---------- Previous post was at 07:54 AM ----------
HI....
i was stuck on boot loop... so not getting into recovery... even mtk was not detecting my phone... so i flashed... factory rom.. backup.. via firmware upgrade in sp flash tool... 3.13.... and did a factory reset and i am back in business,,,, still thanks for help...
you are from India... i am from mumbai.... can i just replace.... boot.img in custom rom with my phone's boot.img.... and do same for LK.bin... i.e. uboot.img... will that work....
Click to expand...
Click to collapse
hi all...
http://forum.xda-developers.com/show....php?t=2012770
http://forum.xda-developers.com/show....php?t=1574401
check this thread...
this even works with our Zen 701HD... so install and enjoy.... new freedom... and.. no custom rom.. needed....
Replaced boot.img and it worked
fandroid7 said:
Download MTK firmware adaptor forum.china-iphone.ru/post862552.html
you should install adb and root access to phone and your stock boot.img
1. download Rom you need to port
2. open mtk firware Adaptor
3. select profile as mtk6589
4.get files from your phone.
5. make your system files as system.zip (will get from backup of your rom)
get files from your system.zip
the tool will look like not responding but its copying rom files
6. get files from port rom
7. tick automated boot.img and make modded boot.img from stock boot.img
8. make adapted rom (port rom for your device)
it will automatically sign your rom
you can edit build.prop before creating rom
copy to phone and flash via cwm
updater-script will be automatically created.
test the rom and tell me if you have any problem like
dark camera. audio not wotking
will tell you how to fix it
Click to expand...
Click to collapse
Replaced boot.img and it worked... bootup perfectly first time... all things working correctly... but now not booting up again... after i tried to restart...
troubleshooting done.... only needed to replace build.prop... and it works great.... even blow to unlock works...
only camera is dark... as told by you.. please tell me how to fix....
defy403 said:
Replaced boot.img and it worked... bootup perfectly first time... all things working correctly... but now not booting up again... after i tried to restart...
Click to expand...
Click to collapse
Hi can you share the files I need to flash from S.P. Tools to make my Irsi 504q back working?
I only have CWM backup. I've bircked it while trying a ported rom from Q800...THANKS!
please help me with camera
fandroid7 said:
Download MTK firmware adaptor forum.china-iphone.ru/post862552.html
you should install adb and root access to phone and your stock boot.img
1. download Rom you need to port
2. open mtk firware Adaptor
3. select profile as mtk6589
4.get files from your phone.
5. make your system files as system.zip (will get from backup of your rom)
get files from your system.zip
the tool will look like not responding but its copying rom files
6. get files from port rom
7. tick automated boot.img and make modded boot.img from stock boot.img
8. make adapted rom (port rom for your device)
it will automatically sign your rom
you can edit build.prop before creating rom
copy to phone and flash via cwm
updater-script will be automatically created.
test the rom and tell me if you have any problem like
dark camera. audio not wotking
will tell you how to fix it
Click to expand...
Click to collapse
only camera is dark... as told by you.. please tell me how to fix....
defy403 said:
only camera is dark... as told by you.. please tell me how to fix....
Click to expand...
Click to collapse
to fix camera.
I assume you use dsixda's kitchen.
Set up working folder for stock rom
Go to advanced > tools for boot.img
> unpack boot.img
Navigate to the folder called Boot-extracted.
> rename it to something else (for now: stock boot)
Set up working folder for port rom.
Go to advanced > unpack boot.img
Do a google search for 'winmerge' > install program (free).
Open winmerge, for left navigate to the 'stock boot' folder, and select init.rc (about 40kb)
For right, navigate to the port 'boot-extracted', and select init.rc (about 40kb)
In winmerge find lines like this
Chmod camera blablabla (on the left pane you will see where there are differences)
Chown camera blablabla
If there are differences in those lines, copy the stock lines, and overwrite the port ones
Save the files (crtl+s)
Navigate to boot extracted folder, you can close winmerge. Copy stock Zimage (from 'stock boot' folder) to port, and overwrite the Zimage there with stock one.
Go back to kitchen, > advanced > tools for boot.img > build new boot image.
Unable to open your site for downloading ROM, could you reupload please.
Looking for more ROMS.
Hi again fan droid.... It would help if you can fix the issues and upload the completed ROM....
I faced the same camera issue when I ported naturewiz HD..... Will you help fix that too?
Sent from my ultrafone 701HD
bro post the ROM, so that we could test it.
use MTK root tools
NHS2008 said:
Hi can you share the files I need to flash from S.P. Tools to make my Irsi 504q back working?
I only have CWM backup. I've bircked it while trying a ported rom from Q800...THANKS!
Click to expand...
Click to collapse
use MTK Root tools ...
1. recovery..backup tab
2. select prepare blocks for flash tool
3. select .md5 file from your CWM backup
4. it will checksum... and prepare files which can be flashed via... SP Flash Tool...
5. make sure you select... firmware upgrade... while flash...
* please note... you will need sp flash tool v3.13 & also.... all the files.... i.e. from preloader to cache.. and even userdata... nvram...tar...
please hit thanks if i help
post the ROM bro, so that we could test it. waiting for a long time.

confused between adb,mtkdroid tool, flashtool?

lenovo A319
i am still in the research phase before rooting so,
Now i figured out three ways to install a custom room
1- adb: unlock boatloader ,flash custom recovery , and using it to install a custom rom .zip file
i like this method , neat easy , i understand it and i have needed files
2-mtkdroid tool:
it needs files have extension which is in existed inside the custom rom .zip file, and also want md5 file which is not compatible with my lenovo anyways
3-flash tool: same thing need files i have no idea about, and doesnt exist in the custom rom .zip file
i made a scatter file from my stock phone using mtkdroid -which i have no idea what is that file-
are mtkdroid and flashtool used together???and if so then why all the headache while using the adb solve the whole thing in couple of lines?

How To flash [ SYSTEM.IMG ] using TWRP

Hii.. All , I'm using A Lyf wind mobile , I have my my orginginel ( system.img ) file I don't have PC Computer . , I'm using TWRP 3.0 .. Somebody help me how to flash a System.img using TWRP
_ THANKS _
vinay durva said:
Hii.. All , I'm using A Lyf wind mobile , I have my my orginginel ( system.img ) file I don't have PC Computer . , I'm using TWRP 3.0 .. Somebody help me how to flash a System.img using TWRP
_ THANKS _
Click to expand...
Click to collapse
TWRP can flash .img files without having to do anything special.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
TWRP can flash .img files without having to do anything special.
Click to expand...
Click to collapse
Sir .. I was tried , there was only 2 options in TWRP 1st one recovery & 2cond one boot .. Which 1 ican select ,, I need to flash system.img
vinay durva said:
Sir .. I was tried , there was only 2 options in TWRP 1st one recovery & 2cond one boot .. Which 1 ican select ,, I need to flash system.img
Click to expand...
Click to collapse
I dont think you've booted into TWRP yet, I think you're looking at bootloader, select recovery and see if it boots to TWRP.
TWRP has more than just 2 options, are you sure you have TWRP? What version is it? Does it look like this?
http://cloud.tapatalk.com/s/58a730280544c/Screenshot_2017-02-17-12-15-48.png?
If that's what you have, select Install then find your .img and flash it.
Sent from my SM-S903VL using Tapatalk
Droidriven said:
I dont think you've booted into TWRP yet, I think you're looking at bootloader, select recovery and see if it boots to TWRP.
TWRP has more than just 2 options, are you sure you have TWRP? What version is it? Does it look like this?
http://cloud.tapatalk.com/s/58a730280544c/Screenshot_2017-02-17-12-15-48.png?
If that's what you have, select Install then find your .img and flash it.
Click to expand...
Click to collapse
Yes sir I'm Booting Into TWRP , Then > install > install images >. I found 2 options 1st one BOOT 2cond RECOVERY , but I won't to flash SYSTEM.img
vinay durva said:
Yes sir I'm Booting Into TWRP , Then > install > install images >. I found 2 options 1st one BOOT 2cond RECOVERY , but I won't to flash SYSTEM.img
Click to expand...
Click to collapse
I remember now that TWRP doesn't flash system.img correctly, system.img isn't a standard .img, you need PC and use fastboot.
Sent from my SM-S903VL using Tapatalk
Thanks Sir.. Any Another way to flash system , i don't have A PC
vinay durva said:
Thanks Sir.. Any Another way to flash system , i don't have A PC
Click to expand...
Click to collapse
I wouldn't try it without PC
Sent from my SM-S903VL using Tapatalk
vinay durva said:
Thanks Sir.. Any Another way to flash system , i don't have A PC
Click to expand...
Click to collapse
I know it is too late, but you can enter in Advaced > Terminal and then run this command:
dd if=/sdcard/system.img of=/dev/block/bootdevice/by-name/system
If your mobile phone doesnt have by-name symlinks you will need to enter the correct partition.
Aex12 said:
I know it is too late, but you can enter in Advaced > Terminal and then run this command:
dd if=/sdcard/system.img of=/dev/block/bootdevice/by-name/system
If your mobile phone doesnt have by-name symlinks you will need to enter the correct partition.
Click to expand...
Click to collapse
hi aex, I have the same problem but I dont have the folder
/bootdevice/by-name............
can you help me?
it will not work.
try to make a folder and "mount -o loop file in it.
and it will be not mounted also if you specify file system type.
(if it work probably you can use the file)
so ,i don't know how fastboot write in partition or probably
in to file system.
however if you do a dd of your current system partition in a file , after will be correctly mounted , or rewrited correctly in the original partition if you need.
then probably you cannot use fastboot system.img directly in twrp shell (using dd)
this is my experience (e2303 sony / pexorom 3.0 twrp 3.1.1)
if you are searching a fast way to know system partition device block
cat /etc/fstab
and look for system
or just mount system in twrp , then in a terminal do a
df -h
and search for system
for e2303 was /dev/block/mmcblk0p30
(example)
twrp have busybox and light kernel.
so , is linux.
for better support try to ask
tonystark88
u need to use simg2img
(sparse file format compression)
system partition device name can be different on other phones.
done.
img can be write by twrp whitout pc/fastboot.
c'ya
giuseppe
just go to file manager and search for system partition, and on first part type your system.img location and 2 part type just system location
I did this Steps on my Huawei P8. Sim2Img reported a non sparse image, so i moved directly to the DD steps. But after writing the image to the partition, the /system Partition cannot get mountet...
What the hell iam doing wrong ????
I extracted the system.img from an update.app Firmware file.
Its the same Firmware file i flashed before with the dload method.
I want to install TWRP on my Phone with an faulty USB Port. So i have no PC / ADB. I Installed the Firmware via the official Dload Method from Huawai. Then i used this crappy Kingroot to get root and installed TWRP. Now i wanted to flash the stock system partition to get rid of Kingroot for Safetynet.
But why i cant just flash the systempartition ?
Or is there another way to gain root for 15 seconds without traces ?
chr2002 said:
I did this Steps on my Huawei P8. Sim2Img reported a non sparse image, so i moved directly to the DD steps. But after writing the image to the partition, the /system Partition cannot get mountet...
What the hell iam doing wrong ????
I extracted the system.img from an update.app Firmware file.
Its the same Firmware file i flashed before with the dload method.
I want to install TWRP on my Phone with an faulty USB Port. So i have no PC / ADB. I Installed the Firmware via the official Dload Method from Huawai. Then i used this crappy Kingroot to get root and installed TWRP. Now i wanted to flash the stock system partition to get rid of Kingroot for Safetynet.
But why i cant just flash the systempartition ?
Or is there another way to gain root for 15 seconds without traces ?
Click to expand...
Click to collapse
Why not just use the settings in Kingroot to remove root? Or convert from Kingroot to SuperSu then use SuperSu app settings to remove root?
You don't have to flash the stock system to remove root.
Sent from my LGL84VL using Tapatalk
Kingroots uninstall leaves traces in /system/xbin and Safetynet wont work. Why i did not try Supersu ? :-/
But i managed to flash the system.img without problems.
First i tryed an extracted system.img from the Huawei Firmware extractor and Sim2img reported an invalid sparse image. So i thought it must be a raw image.....And this was my mistake. It is a useless image for TWRP.
So i created a flashable zip (TWRP cant flash this, too and the /system partition is not mountable after flashing / installing this zip.
BUT, the system.img INSIDE this zip is a spase image, which sim2img can handle. It gave me a nice raw image which i just dd´d to /system and BINGO, my phone starts up normally
The Short Version :
- Create a FLASHABLE ZIP with the Huawei Firmware Extractor
- use SIM2IMG in TWRP Terminal to get a RAW Image.
- dd´it to the /system partition
System img
You use the restore in twrp to flash your system img, you just until the other boxes
Edit: Sorry wrong thread
Lenovo K5 Pro ROM img
After flashing img file (using TWRP 3.3.1) the phone (Lenovo k5 pro) starts in bootloader mode. Everyone can help?
Help u
Hi u can download a deodexed rom because ais doesn't support some stock roms for ex ch Samsung roms. then decompile it.then decompile it with rar or zarchiver or etc. Then install android image studio (ais) from google
Then open it and tap unpack/mount and select system.img or system.img.ext4 file in decompiled rom . After mounting, copy all files to a directory for ex emulated/0/system/system or another. Attention if you copy it in another directory, rename it as (system) now copy the boot.img from decompiled rom into emulated/0/system .then download this file
https://forum.xda-developers.com/an...oid-o-beta-redesigned-emoji-set-t3608280/amp/
Extract meta-inf file into emulated/0/system using winrar or zarchiver or etc. Now you need to have a system folder,boot.img file and a Meta-inf in diractory emulated/0/system. Now compress system,boot.img and meta-inf into one archive and after completing, turn of your device and boot it into twrp recovery and wipe data and cache without wipping internal storage then select install. Then tap select storage and select internal storage.then go to the file and select it and turn off zip singuature verification and install it after installing tis rom, install root zip file and wipe cache/dalvik art and then reboot your device. It may take between 5-25 minutes to boot. Enjoy your new rom
#issues
Sometimes your device maybe take bootloop so you need to install your stock boot.img file and after installing your root zip file choose wipe cache/dalvik art and then reboot your system.
#Alert
1.Don't install the recovery.img file which exists in the decompiled rom because it takes your device into recovery mod and not boot anymore and after you need to install the stock rom using PC
2.your device maybe take bootloop in this method so do it with your own risk
---------- Post added at 07:58 AM ---------- Previous post was at 07:53 AM ----------
ShmuelCohen said:
After flashing img file (using TWRP 3.3.1) the phone (Lenovo k5 pro) starts in bootloader mode. Everyone can help?
Click to expand...
Click to collapse
Reboot your device and install twrp official app and open it and select flash image from a directory and select your own twrp and reboot your device [root]
Connect your phone to a PC and install stock rom using ADB or another app which was made for your smartphone [no root]

Panasonic Eluga Note (MTK 6753) TWRP and root!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I successfully ported TWRP to Panasonic Eluga Note (MTK6753) after a four day effort. Not a dev here. First time doing this.
<TLDR? skip this>
When I started using android in my HTC HD2, every ROM was pre rooted. I took it for granted.
So I get this cheapo MTK and breaking into it is like banging head against a wall!! I was frustrated with the battery drain: Device never sleeps since the last OTA!
So I learnt SP flash tools and downgraded. ( wiped nvram and created another mess in the process- which is a different story. I solved it)
I could spend this effort and time to stop that pesky "Panasonic" bootaudio too. And that's the first thing I deleted after I booted TWRP, even before rooting.
</TLDR? skipped this>
First things first, enable ADB, enable OEM unlock in developer options, and go to bootloader to unlock it <fastboot oem unlock> THIS WILL WIPE DATA!!
Second thing: Backup nvram.img by sp flash readback and learn how to flash it back (search XDA)- Sometimes you can learn from other's mistakes too! I spent a day and half writing back IMEI and WIFI Mac.
Process (if you don't trust me and want to reproduce the steps yourself)
1. Download stock firmware. (google knows)
2. Patch boot.img so that it doesn't overwrite TWRP with stock recovery on each boot (extract by Carliv Image kitchen and hash out the three lines 663, 664 and 665 mentioning "service flash_recovery /system/bin/install-recovery.sh" in init.rc). I created two copies in the same folder (boot.img, and boot-verified.img) and copied scatter into the same folder for flashing. That's what I saw in the firmware folder.
3. Port TWRP using Carliv Image Kitchen method. I downloaded TWRP from here https://forum.xda-developers.com/android/software/twrp-porter-maker-mediatek-mt67xx-32-t3681861 but didn't use their method. It didn't work. The TWRP for this chip was stated as android N, but worked well.
4. Flash ported TWRP after copying scatter file to the Carliv Imagekitchen output folder and selecting that scatter in SP droid tools. I again created recovery.img and recovery-verified.img. Don't know if its needed that way. You could wait and flash boot and recovery together from the same folder.
5. That's it, you can enter custom recovery now. Get that pesky "panasonic" bootaudio off the system/media folder now! You can stay content after this or proceed to root.
<nandroid backup now, including Nvram and NVdata. Just in case>
6. Download Supersu zip flashable and flash it via TWRP. https://download.chainfire.eu/1113/SuperSU/UPDATE-SuperSU-v2.82-20170528234214.zip?retrieve_file=1 worked for me.
7. Reboot, check root!
If you're more daredevil,
8. Download Xposed flashable zip SDK23 and flash it. Download Xposed installer and copy it to SDcard too.
9. Reboot to recovery and flash the zip. Reboot, install xposed installer. Reboot again.
You're done!
I'll upload my boot.img and ported TWRP if anyone shows any interest in this.
Cheers!
(Bonus: this phone has built in IPtables support in the kernel! I used to flash custom kernel for this ability in other Stock ROMs. AFfirewall works "out of the box"- after rooting, of course!)
Edit: uploaded my modded boot.img and ported TWRP. find it here https://drive.google.com/file/d/1sM1BnyBUFN7PfncFcM7vzIet6gKt3G_L/view?usp=sharing
If you want to go the easy route, unzip the folder and flash it with sp flash. You'll be able to boot into recovery and do the other steps for rooting.
Rememer ONLY DOWNLOAD, don't format, or format and download, or anything!
Brilliant Work man. I also was sort of in your situation as well . i have a panasonic Eluga A3 (Qmobile Noir E2) in my country. Stock Qmobile rom was horrendous. so i flashed the panasonic rom but hated the boot audio and the bloatware that came with it. so i decided to make a slimmed down version of it and successfully did it by using superr's kitchen. and also using the kitchen i removed the encryption on the boot.img and then patched it using magisk for easy rooting without recovery. when flashed together with the modded system.img and modded boot.img and twrp, i was totally in control of my device.
If you need any help with anything mtk send me a pm
also are you able to access internal storage in twrp or not ??
andromodgod said:
If you need any help with anything mtk send me a pm
also are you able to access internal storage in twrp or not ??
Click to expand...
Click to collapse
I can access internal storage in twrp. There's a choice to select the internal storage. Havent backed up to it or anything. But its there. I copied a file into it through TWRP now, and it works. I think its all about the fstab. If you don't get access to internal storage, see for any red errors in TWRP output. I can look into my fstab to see what's relevant.
I have a little hiccup though. Now my network drops (both sim at a time), even during a call. But maybe its because I swapped sim 1 and sim 2. I'll let things settle and see if it will persist. In the meanwhile, I swapped sims back to original.
bad.bid said:
I can access internal storage in twrp. There's a choice to select the internal storage. Havent backed up to it or anything. But its there. I copied a file into it through TWRP now, and it works. I think its all about the fstab. If you don't get access to internal storage, see for any red errors in TWRP output. I can look into my fstab to see what's relevant.
I have a little hiccup though. Now my network drops (both sim at a time), even during a call. But maybe its because I swapped sim 1 and sim 2. I'll let things settle and see if it will persist. In the meanwhile, I swapped sims back to original.
Click to expand...
Click to collapse
i wasn't able to access internal storage at first because device was encrypted beforehand. also sim issues might be caused by imei/nvram . check if your device imei matches your imei on the device box.
andromodgod said:
i wasn't able to access internal storage at first because device was encrypted beforehand. also sim issues might be caused by imei/nvram . check if your device imei matches your imei on the device box.
Click to expand...
Click to collapse
Ya, I fixed Imei issues. this one is like a signal drop once every 15 minutes.
bad.bid said:
I successfully ported TWRP to Panasonic Eluga Note (MTK6753) after a four day effort. Not a dev here. First time doing this.
<TLDR? skip this>
When I started using android in my HTC HD2, every ROM was pre rooted. I took it for granted.
So I get this cheapo MTK and breaking into it is like banging head against a wall!! I was frustrated with the battery drain: Device never sleeps since the last OTA!
So I learnt SP flash tools and downgraded. ( wiped nvram and created another mess in the process- which is a different story. I solved it)
I could spend this effort and time to stop that pesky "Panasonic" bootaudio too. And that's the first thing I deleted after I booted TWRP, even before rooting.
</TLDR? skipped this>
First things first, enable ADB, enable OEM unlock in developer options, and go to bootloader to unlock it <fastboot oem unlock> THIS WILL WIPE DATA!!
Second thing: Backup nvram.img by sp flash readback and learn how to flash it back (search XDA)- Sometimes you can learn from other's mistakes too! I spent a day and half writing back IMEI and WIFI Mac.
Process (if you don't trust me and want to reproduce the steps yourself)
1. Download stock firmware. (google knows)
2. Patch boot.img so that it doesn't overwrite TWRP with stock recovery on each boot (extract by Carliv Image kitchen and hash out the three lines 663, 664 and 665 mentioning "service flash_recovery /system/bin/install-recovery.sh" in init.rc). I created two copies in the same folder (boot.img, and boot-verified.img) and copied scatter into the same folder for flashing. That's what I saw in the firmware folder.
3. Port TWRP using Carliv Image Kitchen method. I downloaded TWRP from here https://forum.xda-developers.com/android/software/twrp-porter-maker-mediatek-mt67xx-32-t3681861 but didn't use their method. It didn't work. The TWRP for this chip was stated as android N, but worked well.
4. Flash ported TWRP after copying scatter file to the Carliv Imagekitchen output folder and selecting that scatter in SP droid tools. I again created recovery.img and recovery-verified.img. Don't know if its needed that way. You could wait and flash boot and recovery together from the same folder.
5. That's it, you can enter custom recovery now. Get that pesky "panasonic" bootaudio off the system/media folder now! You can stay content after this or proceed to root.
<nandroid backup now, including Nvram and NVdata. Just in case>
6. Download Supersu zip flashable and flash it via TWRP. https://download.chainfire.eu/1113/SuperSU/UPDATE-SuperSU-v2.82-20170528234214.zip?retrieve_file=1 worked for me.
7. Reboot, check root!
If you're more daredevil,
8. Download Xposed flashable zip SDK23 and flash it. Download Xposed installer and copy it to SDcard too.
9. Reboot to recovery and flash the zip. Reboot, install xposed installer. Reboot again.
You're done!
I'll upload my boot.img and ported TWRP if anyone shows any interest in this.
Cheers!
(Bonus: this phone has built in IPtables support in the kernel! I used to flash custom kernel for this ability in other Stock ROMs. AFfirewall works "out of the box"- after rooting, of course!)
Edit: uploaded my modded boot.img and ported TWRP. find it here https://drive.google.com/file/d/1sM1BnyBUFN7PfncFcM7vzIet6gKt3G_L/view?usp=sharing
If you want to go the easy route, unzip the folder and flash it with sp flash. You'll be able to boot into recovery and do the other steps for rooting.
Rememer ONLY DOWNLOAD, don't format, or format and download, or anything!
Click to expand...
Click to collapse
Can you please mention the steps and software needed for rooting the device plz plz plz
gt612 said:
Can you please mention the steps and software needed for rooting the device plz plz plz
Click to expand...
Click to collapse
No need to quote the whole post!
Download twrp and boot from here. https://drive.google.com/file/d/1sM1BnyBUFN7PfncFcM7vzIet6gKt3G_L/view?usp=sharing
download super su from the link in original post. flash iso files in the twrp boot zip (they are for the updated latest version of android 6.0.1). flash supersu via twrp. search for how to do these things.
Hello. I have an Allveiw V2 Viper S (the romanian version fo the eluga note). I got a stock rom (not from my phone) from where i took and modified both the boot.img and the recovery.img and also used the scatter from here to. I couldn`t make mtk droid tools to see my device. I managed to unlock the bootloader, but when i tried to flash the boot and recovery spft gave me a " Obtain DRAM Faild" error. Can you please help?
Thanks!
madhogg said:
Hello. I have an Allveiw V2 Viper S (the romanian version fo the eluga note). I got a stock rom (not from my phone) from where i took and modified both the boot.img and the recovery.img and also used the scatter from here to. I couldn`t make mtk droid tools to see my device. I managed to unlock the bootloader, but when i tried to flash the boot and recovery spft gave me a " Obtain DRAM Faild" error. Can you please help?
Thanks!
Click to expand...
Click to collapse
This was an impulse project. I learned many things in the way. But I have left that effort behind. So, for now: no idea. Hope google helps!
bad.bid said:
I successfully ported TWRP to Panasonic Eluga Note (MTK6753) after a four day effort. Not a dev here. First time doing this.
<TLDR? skip this>
When I started using android in my HTC HD2, every ROM was pre rooted. I took it for granted.
So I get this cheapo MTK and breaking into it is like banging head against a wall!! I was frustrated with the battery drain: Device never sleeps since the last OTA!
So I learnt SP flash tools and downgraded. ( wiped nvram and created another mess in the process- which is a different story. I solved it)
I could spend this effort and time to stop that pesky "Panasonic" bootaudio too. And that's the first thing I deleted after I booted TWRP, even before rooting.
</TLDR? skipped this>
First things first, enable ADB, enable OEM unlock in developer options, and go to bootloader to unlock it <fastboot oem unlock> THIS WILL WIPE DATA!!
Second thing: Backup nvram.img by sp flash readback and learn how to flash it back (search XDA)- Sometimes you can learn from other's mistakes too! I spent a day and half writing back IMEI and WIFI Mac.
Process (if you don't trust me and want to reproduce the steps yourself)
1. Download stock firmware. (google knows)
2. Patch boot.img so that it doesn't overwrite TWRP with stock recovery on each boot (extract by Carliv Image kitchen and hash out the three lines 663, 664 and 665 mentioning "service flash_recovery /system/bin/install-recovery.sh" in init.rc). I created two copies in the same folder (boot.img, and boot-verified.img) and copied scatter into the same folder for flashing. That's what I saw in the firmware folder.
3. Port TWRP using Carliv Image Kitchen method. I downloaded TWRP from here https://forum.xda-developers.com/android/software/twrp-porter-maker-mediatek-mt67xx-32-t3681861 but didn't use their method. It didn't work. The TWRP for this chip was stated as android N, but worked well.
4. Flash ported TWRP after copying scatter file to the Carliv Imagekitchen output folder and selecting that scatter in SP droid tools. I again created recovery.img and recovery-verified.img. Don't know if its needed that way. You could wait and flash boot and recovery together from the same folder.
5. That's it, you can enter custom recovery now. Get that pesky "panasonic" bootaudio off the system/media folder now! You can stay content after this or proceed to root.
<nandroid backup now, including Nvram and NVdata. Just in case>
6. Download Supersu zip flashable and flash it via TWRP. https://download.chainfire.eu/1113/SuperSU/UPDATE-SuperSU-v2.82-20170528234214.zip?retrieve_file=1 worked for me.
7. Reboot, check root!
If you're more daredevil,
8. Download Xposed flashable zip SDK23 and flash it. Download Xposed installer and copy it to SDcard too.
9. Reboot to recovery and flash the zip. Reboot, install xposed installer. Reboot again.
You're done!
I'll upload my boot.img and ported TWRP if anyone shows any interest in this.
Cheers!
(Bonus: this phone has built in IPtables support in the kernel! I used to flash custom kernel for this ability in other Stock ROMs. AFfirewall works "out of the box"- after rooting, of course!)
Edit: uploaded my modded boot.img and ported TWRP. find it here https://drive.google.com/file/d/1sM1BnyBUFN7PfncFcM7vzIet6gKt3G_L/view?usp=sharing
If you want to go the easy route, unzip the folder and flash it with sp flash. You'll be able to boot into recovery and do the other steps for rooting.
Rememer ONLY DOWNLOAD, don't format, or format and download, or anything!
Click to expand...
Click to collapse
Brother i try this method at Panasonic eluga ray 700 (MT6753_EB_90S55ER7_V1008) flash complete and successful install problem my set dead not On so i install original Panasonic eluga ray 700 (MT6753_EB_90S55ER7_V1008) flash set is dead and not connecting to pc plz help me what i can do ......
andromodgod said:
Brilliant Work man. I also was sort of in your situation as well . i have a panasonic Eluga A3 (Qmobile Noir E2) in my country. Stock Qmobile rom was horrendous. so i flashed the panasonic rom but hated the boot audio and the bloatware that came with it. so i decided to make a slimmed down version of it and successfully did it by using superr's kitchen. and also using the kitchen i removed the encryption on the boot.img and then patched it using magisk for easy rooting without recovery. when flashed together with the modded system.img and modded boot.img and twrp, i was totally in control of my device.
If you need any help with anything mtk send me a pm
also are you able to access internal storage in twrp or not ??
Click to expand...
Click to collapse
Panasonic eluga ray 700 (MT6753_EB_90S55ER7_V1008) after flash set is dead and not connecting to pc plz help us expert......
....
Network drop
Hello dear friend I successfully flash twrp 3.0.2 but I see network signal problem signal drop many time..
Pls tell me how to resolve these issue..
Singnal drop
bad.bid said:
Ya, I fixed Imei issues. this one is like a signal drop once every 15 minutes.
Click to expand...
Click to collapse
Dear sir panasonic eluga note network signal drop many time a day after installing ur ported twrp ..Pls tell me how to resolve signal drop issue..
Really wanna do it but your steps sound way complicated for "non-MTK pro guy". I have that device lying unused. it would be awesome if you could throw a "readme" file in your drive or here with simpler guidance steps like other "TWRP & root installation guide" we have for other phones. Plus You seem like you could port/build a ROM for this device and make substratum friendly. I know it's a big ask & I have a feeling that you like dark UI for that device too . Hoping for the best response.
If you're more daredevil,
8. Download Xposed flashable zip SDK23 and flash it. Download Xposed installer and copy it to SDcard too.
9. Reboot to recovery and flash the zip. Reboot, install xposed installer. Reboot again.
I have a doubt about these two steps
Should i have to flash it twice and have to download two separate file which is one flashable zip and installer. And in the next step 9th which zip file should i flash.
My questions might sound silly but i am asking so because when last time i tried i installed xposed, installed its firmware and then downloaded a module it was cynolockscreen something and applied it. It asked ne to reboot i did but then my phone crashed. Screen was going on and off then i rebooted to recovery and did a factory reset amd since then i haven't done any thing in my phone not even flashed the SuperSU...
Can you please help me with the further steps...
rooting eluga note
can u pls tell me how to root eluga note? i've tried many apps to root it but nothing worked

Yotaphone corrupted baseband

Hello After update my yota y3 with the latest rom zip, the modem ( no-hlos) is corrupted .
When reboot the phone IMEI is empty and redio is not working !!! Baseband is dead
How to Fix it ??
https://twitter.com/dlnraja/status/1029081236906684420?s=19
Does someone have the right no-hlos.img file to flash it with fastboot ??
there is on the zip, the NON-HLOS.bin.p file , i hope thats this file is encrypted .
Can someone unlock this file or send me the right modem file to fix this issue ???

Categories

Resources